Failed boards:
cubie2 sunxi_defconfig : FAILED 1:21.04 panda multi_v7_defconfig : FAILED 1:38.12 snowball multi_v7_defconfig : FAILED 1:10.80 wandboard imx_v6_v7_defconfig : FAILED 1:15.00
Successful boards:
apc vt8500_v6_v7_defconfig : passed 1:17.16 arndale exynos_defconfig : passed 1:13.08 bbb omap2plus_defconfig : passed 1:36.12 beaver tegra_defconfig : passed 0:59.81 beaver multi_v7_defconfig : passed 0:52.47 capri bcm_defconfig : passed 0:43.61 capri multi_v7_defconfig : passed 0:44.62 cubie sunxi_defconfig : passed 1:00.43 cubie multi_v7_defconfig : passed 1:09.95 cubie2 multi_v7_defconfig : passed 1:10.25 cubie2 multi_lpae_defconfig : passed 0:55.94 dalmore tegra_defconfig : passed 1:18.67 dalmore multi_v7_defconfig : passed 1:14.55 dalmore multi_lpae_defconfig : passed 1:18.74 hummingboard imx_v6_v7_defconfig : passed 1:27.99 hummingboard multi_v7_defconfig : passed 1:19.23 omap5uevm omap2plus_defconfig : warnings 0:56.55 omap5uevm multi_v7_defconfig : warnings 1:49.18 omap5uevm multi_lpae_defconfig : warnings 1:39.65 panda omap2plus_defconfig : warnings 1:11.93 seaboard tegra_defconfig : passed 1:58.97 seaboard multi_v7_defconfig : passed 1:02.28 snow exynos_defconfig : passed 1:27.97 snowball u8500_defconfig : passed 2:04.39 trimslice tegra_defconfig : passed 0:57.64 trimslice multi_v7_defconfig : passed 1:03.69 wandboard multi_v7_defconfig : passed 0:57.96
Offline boards:
bbb multi_v7_defconfig : OFFLINE 0:47.79 sama5 sama5_defconfig : OFFLINE 1:52.29
Board legend is available at http://arm-soc.lixom.net/boards.html
Last entries of failed logs below:
========================================================================
Board cubie2-sunxi_defconfig failure log: -------------------------------------------------
[ 0.017697] platform ahci-5v.2: Driver reg-fixed-voltage requests probe deferral [ 0.017723] reg-fixed-voltage usb1-vbus.3: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/usb1_vbus_pin@0, deferring probe [ 0.017736] platform usb1-vbus.3: Driver reg-fixed-voltage requests probe deferral [ 0.017756] reg-fixed-voltage usb2-vbus.4: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/usb2_vbus_pin@0, deferring probe [ 0.017768] platform usb2-vbus.4: Driver reg-fixed-voltage requests probe deferral [ 0.018707] Switched to clocksource arch_sys_counter [ 0.025834] NET: Registered protocol family 2 [ 0.026299] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.026386] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.026506] TCP: Hash tables configured (established 8192 bind 8192) [ 0.026590] TCP: reno registered [ 0.026604] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.026660] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.026863] NET: Registered protocol family 1 [ 0.027249] RPC: Registered named UNIX socket transport module. [ 0.027267] RPC: Registered udp transport module. [ 0.027272] RPC: Registered tcp transport module. [ 0.027278] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.028254] futex hash table entries: 512 (order: 3, 32768 bytes) [ 0.028819] bounce pool size: 64 pages [ 0.036553] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.036570] io scheduler noop registered [ 0.036577] io scheduler deadline registered [ 0.036763] io scheduler cfq registered (default) [ 0.038418] sunxi-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver [ 0.080603] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled [ 0.083034] console [ttyS0] disabled [ 0.103227] 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 33, base_baud = 1500000) is a U6_16550A [ 0.618740] console [ttyS0] enabled [ 0.623458] mousedev: PS/2 mouse device common for all mice [ 0.629334] i2c /dev entries driver [ 0.634139] sunxi-wdt 1c20c90.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0) [ 0.643132] TCP: cubic registered [ 0.646452] NET: Registered protocol family 17 [ 0.651013] Registering SWP/SWPB emulation handler [ 0.656731] ahci-5v: 5000 mV [ 0.660019] usb1-vbus: 5000 mV [ 0.663365] usb2-vbus: 5000 mV ~$off # PYBOOT: Exception: timeout
========================================================================
Board panda-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.624603] platform 4809c000.mmc: Driver omap_hsmmc requests probe deferral [ 1.632293] omap_hsmmc 480d5000.mmc: unable to get vmmc regulator -517 [ 1.639190] platform 480d5000.mmc: Driver omap_hsmmc requests probe deferral [ 1.647094] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.653991] usbcore: registered new interface driver usbhid [ 1.659851] usbhid: USB HID core driver [ 1.667877] TCP: cubic registered [ 1.671356] NET: Registered protocol family 17 [ 1.676239] Key type dns_resolver registered [ 1.681213] Power Management for TI OMAP4+ devices. [ 1.686370] Power Management for TI OMAP4. [ 1.690673] OMAP4 PM: u-boot >= v2012.07 is required for full PM support [ 1.697814] ThumbEE CPU extension supported. [ 1.702545] Registering SWP/SWPB emulation handler [ 1.708282] vwl1271: 1800 mV [ 1.712738] Skipping twl internal clock init and using bootloader value (unknown osc rate) [ 1.722686] twl 0-0048: PIH (irq 39) nested IRQs [ 1.728393] twl_rtc rtc.15: Power up reset detected. [ 1.734771] twl_rtc rtc.15: Enabling TWL-RTC [ 1.741851] twl_rtc rtc.15: rtc core: registered rtc.15 as rtc0 [ 1.748687] VAUX1_6030: 1000 <--> 3000 mV at 2800 mV [ 1.754791] VAUX2_6030: 1200 <--> 2800 mV at 1800 mV [ 1.760925] VAUX3_6030: 1000 <--> 3000 mV at 1200 mV [ 1.767028] VMMC: 1200 <--> 3000 mV at 3000 mV [ 1.772552] VPP: 1800 <--> 2500 mV at 1900 mV [ 1.778015] VUSIM: 1200 <--> 2900 mV at 1800 mV [ 1.783477] VDAC: 1800 mV [ 1.783477] VANA: 2100 mV [ 1.790374] VCXIO: 1800 mV [ 1.790374] VUSB: 3300 mV [ 1.797302] V1V8: 1800 mV [ 1.800872] V2V1: 2100 mV [ 1.879364] usb 1-1: new high-speed USB device number 2 using ehci-omap [ 2.049774] hub 1-1:1.0: USB hub found [ 2.054046] hub 1-1:1.0: 5 ports detected [ 2.643676] usb 1-1.1: new high-speed USB device number 3 using ehci-omap [ 2.898925] smsc95xx v1.0.4 [ 4.706207] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-4a064c00.ehci-1.1, smsc95xx USB 2.0 Ethernet, 3a:ce:08:d5:bd:e9 ~$off # PYBOOT: Exception: timeout
========================================================================
Board snowball-multi_v7_defconfig failure log: -------------------------------------------------
BOOTP broadcast 1 *** Unhandled DHCP Option in OFFER/ACK: 28 *** Unhandled DHCP Option in OFFER/ACK: 28 DHCP client bound to address 172.16.1.106 U8500 $ setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 U8500 $ tftp 0x01000000 tmp/snowball-Kb8NAj/tmpSuF97w-uImage tftp 0x01000000 tmp/snowball-Kb8NAj/tmpSuF97w-uImage smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC 08:00:08:1e:0f:44 Using smc911x-0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.106 Filename 'tmp/snowball-Kb8NAj/tmpSuF97w-uImage'. Load address: 0x1000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ############################################################ done Bytes transferred = 4690561 (479281 hex) U8500 $ printenv bootargs printenv bootargs bootargs=console=ttyAMA2,115200 root=/dev/mmcblk0p4 rootwait rw debug earlyprintk U8500 $ bootm 0x01000000 bootm 0x01000000 ## Booting kernel from Legacy Image at 01000000 ... Image Name: Linux Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 4690497 Bytes = 4.5 MB Load Address: 00008000 Entry Point: 00008000 Loading Kernel Image ... OK OK
Starting kernel ...
~$off # PYBOOT: Exception: timeout
========================================================================
Board wandboard-imx_v6_v7_defconfig failure log: -------------------------------------------------
r6:edc682e0 r5:edc682e0 r4:edc8f8a0 [<800eb9d0>] (lookup_real) from [<800ec770>] (__lookup_hash+0x40/0x48) r5:edc682e0 r4:00000011 [<800ec730>] (__lookup_hash) from [<800ed19c>] (lookup_slow+0x44/0xb0) r5:edb99e18 r4:edb99ed0 [<800ed158>] (lookup_slow) from [<800ee074>] (link_path_walk+0x764/0x818) r7:ee27f01e r6:edb99e18 r5:edb99e20 r4:edb99ed0 [<800ed910>] (link_path_walk) from [<800f0814>] (path_openat+0x94/0x628) r10:edb98000 r9:00000000 r8:00000000 r7:ee27f000 r6:edb99f5c r5:edb99ed0 r4:ed4fd180 [<800f0780>] (path_openat) from [<800f1d78>] (do_filp_open+0x34/0x88) r10:00000000 r9:edb98000 r8:8000eb04 r7:ffffff9c r6:ee27f000 r5:00000001 r4:edb99f5c [<800f1d44>] (do_filp_open) from [<800e2674>] (do_sys_open+0x104/0x1d4) r7:00000003 r6:ffffff9c r5:ee27f000 r4:00020000 [<800e2570>] (do_sys_open) from [<800e2768>] (SyS_open+0x24/0x28) r9:edb98000 r8:8000eb04 r7:00000005 r6:7e9ad0d4 r5:786725a0 r4:78672798 [<800e2744>] (SyS_open) from [<8000e940>] (ret_fast_syscall+0x0/0x48) Code: e3a0000b e1a01005 eb061da3 eaffff88 (e7f001f2) ---[ end trace 9571d1abf6c75e4c ]--- Segmentation fault [?25l[?1c7[1G[[31mFAIL[39;49m8[?25h[?0c [31mfailed![39;49m
Debian GNU/Linux 7.0 wandboard ttymxc0
wandboard login: root root Password: root
Last login: Thu Jan 1 00:00:17 UTC 1970 on ttymxc0 Linux wandboard 3.15.0-rc3+ #1 SMP Wed Apr 30 09:03:19 PDT 2014 armv7l
The programs included with the Debian GNU/Linux system are free software; the exact distribution terms for each program are described in the individual files in /usr/share/doc/*/copyright.
Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent permitted by applicable law. ~$off # PYBOOT: Exception: timeout