Full logs are available at http://arm-soc.lixom.net/bootlogs/mainline/v4.7-rc3-9-gdb06d75/
Failed boards:
arndale multi_v7_nosmp_defconfig : NO BUILD bbb multi_v7_nosmp_defconfig : NO BUILD beagleboard-x15 multi_v7_nosmp_defconfig : NO BUILD beaver arm-tegra_defconfig : FAILED 1:48.60 beaver arm-multi_v7_defconfig : FAILED 2:03.85 beaver multi_v7_nosmp_defconfig : NO BUILD capri multi_v7_nosmp_defconfig : NO BUILD colibri-vf61 multi_v7_nosmp_defconfig : NO BUILD colombus multi_v7_nosmp_defconfig : NO BUILD cosmic multi_v7_nosmp_defconfig : NO BUILD cubie multi_v7_nosmp_defconfig : NO BUILD cubie2 multi_v7_nosmp_defconfig : NO BUILD cubox multi_v7_nosmp_defconfig : NO BUILD dalmore multi_v7_nosmp_defconfig : NO BUILD hummingboard multi_v7_nosmp_defconfig : NO BUILD jetsontk1 multi_v7_nosmp_defconfig : NO BUILD minnowmax minnowmax_defconfig : NO BUILD odroidu3 arm-exynos_defconfig : FAILED 0:38.81 omap5uevm arm-omap2plus_defconfig : FAILED 2:05.61 omap5uevm arm-multi_v7_defconfig : FAILED 2:06.28 omap5uevm arm-multi_lpae_defconfig : FAILED 2:28.33 omap5uevm multi_v7_nosmp_defconfig : NO BUILD pandaes multi_v7_nosmp_defconfig : NO BUILD parallella multi_v7_nosmp_defconfig : NO BUILD pi arm-multi_v7_defconfig : FAILED 1:55.93 pi arm-multi_lpae_defconfig : FAILED 1:59.02 pi multi_v7_nosmp_defconfig : NO BUILD pit multi_v7_nosmp_defconfig : NO BUILD rk3288evb multi_v7_nosmp_defconfig : NO BUILD seaboard multi_v7_nosmp_defconfig : NO BUILD snow multi_v7_nosmp_defconfig : NO BUILD snowball multi_v7_nosmp_defconfig : NO BUILD socfpga multi_v7_nosmp_defconfig : NO BUILD trimslice multi_v7_nosmp_defconfig : NO BUILD wandboard multi_v7_nosmp_defconfig : NO BUILD
Successful boards:
apc arm-vt8500_v6_v7_defconfig : passed 1:16.52 arndale arm-exynos_defconfig : passed 1:54.63 arndale arm-multi_v7_defconfig : passed 1:35.15 arndale arm-multi_lpae_defconfig : passed 1:25.71 bbb arm-omap2plus_defconfig : passed 1:39.27 bbb arm-multi_v7_defconfig : passed 1:16.31 beagleboard-x15 arm-omap2plus_defconfig : warnings 0:51.10 beagleboard-x15 arm-multi_v7_defconfig : warnings 0:56.67 beagleboard-x15 arm-multi_lpae_defconfig : warnings 0:54.64 capri arm-bcm_defconfig : passed 0:50.06 capri arm-multi_v7_defconfig : passed 1:07.39 chitra powerpc-pasemi_defconfig : passed 2:09.57 chitra powerpc-ppc64_defconfig : passed 2:00.00 colombus arm-sunxi_defconfig : passed 2:30.77 colombus arm-multi_v7_defconfig : passed 2:29.48 colombus arm-multi_lpae_defconfig : passed 2:31.04 cosmic arm-imx_v6_v7_defconfig : passed 3:26.17 cosmic arm-multi_v7_defconfig : passed 3:02.69 cubie arm-sunxi_defconfig : passed 0:54.85 cubie arm-multi_v7_defconfig : passed 0:49.53 cubie2 arm-sunxi_defconfig : passed 0:50.50 cubie2 arm-multi_v7_defconfig : passed 0:57.32 cubie2 arm-multi_lpae_defconfig : passed 0:52.00 cubox arm-multi_v7_defconfig : passed 1:23.34 cubox arm-mvebu_v7_defconfig : passed 1:10.09 dalmore arm-tegra_defconfig : warnings 1:26.40 dalmore arm-multi_lpae_defconfig : warnings 1:38.05 jetsontk1 arm-tegra_defconfig : warnings 0:53.55 jetsontk1 arm-multi_v7_defconfig : warnings 0:49.08 jetsontk1 arm-multi_lpae_defconfig : warnings 1:08.05 pandaes arm-omap2plus_defconfig : warnings 1:32.88 pandaes arm-multi_v7_defconfig : passed 1:45.39 parallella arm-multi_v7_defconfig : passed 3:05.95 pi arm-exynos_defconfig : passed 2:12.62 pit arm-exynos_defconfig : passed 2:12.01 pit arm-multi_v7_defconfig : passed 2:21.95 pit arm-multi_lpae_defconfig : passed 2:18.33 seaboard arm-multi_v7_defconfig : warnings 1:34.72 seattle arm64-defconfig : passed 2:27.84 snow arm-exynos_defconfig : passed 2:09.51 snow arm-multi_v7_defconfig : passed 2:05.74 snow arm-multi_lpae_defconfig : passed 2:00.95 snowball arm-u8500_defconfig : passed 1:27.96 snowball arm-multi_v7_defconfig : passed 1:35.36 trimslice arm-tegra_defconfig : warnings 1:35.83 wandboard arm-imx_v6_v7_defconfig : passed 1:14.57 wandboard arm-multi_v7_defconfig : passed 1:03.26
Offline boards:
colibri-vf61 arm-imx_v6_v7_defconfig : OFFLINE 1:23.05 colibri-vf61 arm-multi_v7_defconfig : OFFLINE 1:18.98 dalmore arm-multi_v7_defconfig : OFFLINE 1:58.81 hummingboard arm-imx_v6_v7_defconfig : OFFLINE 2:21.12 hummingboard arm-multi_v7_defconfig : OFFLINE 2:12.13 rk3288evb arm-multi_v7_defconfig : OFFLINE 0:55.68 rk3288evb arm-multi_lpae_defconfig : OFFLINE 0:43.23 sama5 arm-sama5_defconfig : OFFLINE 2:18.72 sama5d3-xplained arm-sama5_defconfig : OFFLINE 2:17.30 seaboard arm-tegra_defconfig : OFFLINE 1:53.93 socfpga arm-socfpga_defconfig : OFFLINE 2:28.76 socfpga arm-multi_v7_defconfig : OFFLINE 2:14.84 trimslice arm-multi_v7_defconfig : OFFLINE 2:31.81
Board legend is available at http://arm-soc.lixom.net/boards.html
Last entries of failed logs below:
========================================================================
Board beaver-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 3.425083] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt [ 3.431602] pcie_pme 0000:00:01.0:pcie001: service driver pcie_pme loaded [ 3.438554] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 3.444139] r8169 0000:01:00.0: enabling device (0140 -> 0143) [ 3.451140] r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xf09f2000, 02:04:4b:01:60:99, XID 0c900800 IRQ 375 [ 3.461139] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 3.472298] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.478938] [drm] No driver support for vblank timestamp query. [ 3.484876] drm drm: No connectors reported connected with modes [ 3.490884] [drm] Cannot find any crtc or sizes - going 1024x768 [ 3.516365] Console: switching to colour frame buffer device 128x48 [ 3.528504] drm drm: fb0: frame buffer device [ 3.543729] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.554641] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 3.561106] tegra-ehci 7d004000.usb: EHCI Host Controller [ 3.566515] tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1 [ 3.575020] tegra-ehci 7d004000.usb: irq 343, io mem 0x7d004000 [ 3.588742] tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.00 [ 3.595502] hub 1-0:1.0: USB hub found [ 3.599273] hub 1-0:1.0: 1 port detected [ 3.604225] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.609635] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 3.617373] tegra-ehci 7d008000.usb: irq 344, io mem 0x7d008000 [ 3.628735] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.00 [ 3.635407] hub 2-0:1.0: USB hub found [ 3.639173] hub 2-0:1.0: 1 port detected [ 3.649230] tps65910-rtc tps65910-rtc: setting system clock to 2000-01-01 00:00:02 UTC (946684802) [ 3.662895] vdd_sata,avdd_plle: disabling [ 3.667640] usb1_vbus: disabling [ 3.671726] Waiting for root device /dev/mmcblk0p1... [ 3.948738] usb 2-1: new high-speed USB device number 2 using tegra-ehci [ 4.899030] asix 2-1:1.0 eth1: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 58:6d:8f:50:ba:18 [ 80.113736] random: nonblocking pool is initialized
[PYBOOT] [beaver 02:01]: Timed out waiting for "<type 'str'>":
[PYBOOT] [beaver 02:02]: got exception: timeout ~$off
[PYBOOT] [beaver 02:03]: Done.
========================================================================
Board beaver-arm-tegra_defconfig failure log: -------------------------------------------------
[ 6.434202] pcie_pme 0000:00:01.0:pcie001: service driver pcie_pme loaded [ 6.441237] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 6.446836] r8169 0000:01:00.0: enabling device (0140 -> 0143) [ 6.454340] r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xf087e000, 02:04:4b:01:60:99, XID 0c900800 IRQ 375 [ 6.464341] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 6.476924] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 6.483542] [drm] No driver support for vblank timestamp query. [ 6.489542] drm drm: No connectors reported connected with modes [ 6.495553] [drm] Cannot find any crtc or sizes - going 1024x768 [ 6.521220] Console: switching to colour frame buffer device 128x48 [ 6.533023] drm drm: fb0: frame buffer device [ 6.560784] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 6.570076] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 6.576555] tegra-ehci 7d004000.usb: EHCI Host Controller [ 6.581988] tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1 [ 6.589961] tegra-ehci 7d004000.usb: irq 343, io mem 0x7d004000 [ 6.610791] tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.00 [ 6.618391] hub 1-0:1.0: USB hub found [ 6.622172] hub 1-0:1.0: 1 port detected [ 6.626966] tegra-ehci 7d008000.usb: EHCI Host Controller [ 6.632393] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 6.640263] tegra-ehci 7d008000.usb: irq 344, io mem 0x7d008000 [ 6.660785] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.00 [ 6.668265] hub 2-0:1.0: USB hub found [ 6.672045] hub 2-0:1.0: 1 port detected [ 6.680218] tps65910-rtc tps65910-rtc: setting system clock to 2000-01-01 00:00:02 UTC (946684802) [ 6.698312] vdd_sata,avdd_plle: disabling [ 6.702736] usb1_vbus: disabling [ 6.706147] ALSA device list: [ 6.709104] #0: NVIDIA Tegra Beaver [ 6.713341] Waiting for root device /dev/mmcblk0p1... [ 6.990791] usb 2-1: new high-speed USB device number 2 using tegra-ehci [ 7.976269] asix 2-1:1.0 eth1: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 58:6d:8f:50:ba:18
[PYBOOT] [beaver 01:46]: Timed out waiting for "<type 'str'>":
[PYBOOT] [beaver 01:47]: got exception: timeout ~$off
[PYBOOT] [beaver 01:48]: Done.
========================================================================
Board odroidu3-arm-exynos_defconfig failure log: -------------------------------------------------
[ 2.297554] 5fc0: c01081b0 c01081b4 60000053 ffffffff [ 2.302590] [<c010b7d4>] (__irq_svc) from [<c01081b4>] (arch_cpu_idle+0x38/0x3c) [ 2.309967] [<c01081b4>] (arch_cpu_idle) from [<c01530f8>] (cpu_startup_entry+0x1c0/0x238) [ 2.318201] [<c01530f8>] (cpu_startup_entry) from [<401015ac>] (0x401015ac) [ 2.325133] CPU3: stopping [ 2.327824] CPU: 3 PID: 0 Comm: swapper/3 Not tainted 4.7.0-rc3-00009-gdb06d75 #1 [ 2.335278] Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) [ 2.341363] [<c010dfec>] (unwind_backtrace) from [<c010ad18>] (show_stack+0x10/0x14) [ 2.349075] [<c010ad18>] (show_stack) from [<c0326ab8>] (dump_stack+0x78/0x8c) [ 2.356272] [<c0326ab8>] (dump_stack) from [<c010d2a8>] (handle_IPI+0x198/0x1ac) [ 2.363644] [<c010d2a8>] (handle_IPI) from [<c010150c>] (gic_handle_irq+0x94/0x98) [ 2.371188] [<c010150c>] (gic_handle_irq) from [<c010b7d4>] (__irq_svc+0x54/0x90) [ 2.378643] Exception stack(0xee8b9f88 to 0xee8b9fd0) [ 2.383677] 9f80: 00000001 00000000 00000000 c0113d20 ee8b8000 c0b02454 [ 2.391830] 9fa0: 00000000 00000000 c0a623f8 c0b024b8 c0b4389b c0b024c0 f0816640 ee8b9fd8 [ 2.399979] 9fc0: c01081b0 c01081b4 60000053 ffffffff [ 2.405014] [<c010b7d4>] (__irq_svc) from [<c01081b4>] (arch_cpu_idle+0x38/0x3c) [ 2.412389] [<c01081b4>] (arch_cpu_idle) from [<c01530f8>] (cpu_startup_entry+0x1c0/0x238) [ 2.420623] [<c01530f8>] (cpu_startup_entry) from [<401015ac>] (0x401015ac) [ 2.427558] CPU2: stopping [ 2.430248] CPU: 2 PID: 0 Comm: swapper/2 Not tainted 4.7.0-rc3-00009-gdb06d75 #1 [ 2.437703] Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) [ 2.443788] [<c010dfec>] (unwind_backtrace) from [<c010ad18>] (show_stack+0x10/0x14) [ 2.451500] [<c010ad18>] (show_stack) from [<c0326ab8>] (dump_stack+0x78/0x8c) [ 2.458697] [<c0326ab8>] (dump_stack) from [<c010d2a8>] (handle_IPI+0x198/0x1ac) [ 2.466068] [<c010d2a8>] (handle_IPI) from [<c010150c>] (gic_handle_irq+0x94/0x98) [ 2.473613] [<c010150c>] (gic_handle_irq) from [<c010b7d4>] (__irq_svc+0x54/0x90) [ 2.481067] Exception stack(0xee8b7f88 to 0xee8b7fd0) [ 2.486102] 7f80: 00000001 00000000 00000000 c0113d20 ee8b6000 c0b02454 [ 2.494255] 7fa0: 00000000 00000000 c0a623f8 c0b024b8 c0b4389b c0b024c0 f0816540 ee8b7fd8 [ 2.502404] 7fc0: c01081b0 c01081b4 60000153 ffffffff [ 2.507439] [<c010b7d4>] (__irq_svc) from [<c01081b4>] (arch_cpu_idle+0x38/0x3c) [ 2.514813] [<c01081b4>] (arch_cpu_idle) from [<c01530f8>] (cpu_startup_entry+0x1c0/0x238) [ 2.523048] [<c01530f8>] (cpu_startup_entry) from [<401015ac>] (0x401015ac) [ 2.529992] ---[ end Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0)
[PYBOOT] [odroidu3 00:36]: got exception: panic ~$off
[PYBOOT] [odroidu3 00:37]: Done.
========================================================================
Board omap5uevm-arm-multi_lpae_defconfig failure log: -------------------------------------------------
[ 1.938263] mmc0: new high speed MMC card at address 0001 [ 1.949151] mmcblk0: mmc0:0001 SEM04G 3.69 GiB [ 1.954055] mmcblk0boot0: mmc0:0001 SEM04G partition 1 2.00 MiB [ 1.960401] mmcblk0boot1: mmc0:0001 SEM04G partition 2 2.00 MiB [ 1.970587] smps9: Bringing 0uV into 2100000-2100000uV [ 1.978760] ldo1: Bringing 0uV into 1800000-1800000uV [ 1.985301] ldo2: Bringing 0uV into 2800000-2800000uV [ 1.993340] ldo4: Bringing 0uV into 1800000-1800000uV [ 2.004463] ldo7: Bringing 0uV into 2000000-2000000uV [ 2.012095] smsc95xx v1.0.4 [ 2.015418] ldo9: bypassed regulator has no supply! [ 2.020546] ldo9: failed to get the current voltage(-517) [ 2.026215] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 2.041591] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 2.064322] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 2.068119] smsc95xx 1-3:1.0 eth0: register 'smsc95xx' at usb-4a064c00.ehci-3, smsc95xx USB 2.0 Ethernet, ea:f4:0b:c2:85:d9 [ 2.082421] omap-dwc3 4a020000.omap_dwc3: vbus init failed [ 2.112279] smps9: Bringing 0uV into 2100000-2100000uV [ 2.130970] ldo9: bypassed regulator has no supply! [ 2.136091] ldo9: failed to get the current voltage(-517) [ 2.141755] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 2.156264] palmas-rtc 48070000.i2c:palmas@48:rtc: setting system clock to 2000-01-01 00:33:15 UTC (946686795) [ 2.172167] pbias_mmc_omap5: disabling [ 2.176109] vmmcsdio_fixed: disabling [ 2.180673] Waiting for root device /dev/mmcblk1p2... [ 2.293565] usb 1-2: new high-speed USB device number 3 using ehci-omap [ 2.429418] hub 1-2:1.0: USB hub found [ 2.433421] hub 1-2:1.0: 3 ports detected [ 2.439184] omap-dwc3 4a020000.omap_dwc3: vbus init failed [ 2.467258] smps9: Bringing 0uV into 2100000-2100000uV [ 2.485950] ldo9: bypassed regulator has no supply! [ 2.491061] ldo9: failed to get the current voltage(-517) [ 2.496724] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator
[PYBOOT] [omap5uevm 02:25]: Timed out waiting for "<type 'str'>":
[PYBOOT] [omap5uevm 02:26]: got exception: timeout ~$off
[PYBOOT] [omap5uevm 02:27]: Done.
========================================================================
Board omap5uevm-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.938245] mmc0: new high speed MMC card at address 0001 [ 1.949026] mmcblk0: mmc0:0001 SEM04G 3.69 GiB [ 1.953937] mmcblk0boot0: mmc0:0001 SEM04G partition 1 2.00 MiB [ 1.960305] mmcblk0boot1: mmc0:0001 SEM04G partition 2 2.00 MiB [ 1.970412] smps9: Bringing 0uV into 2100000-2100000uV [ 1.978599] ldo1: Bringing 0uV into 1800000-1800000uV [ 1.985137] ldo2: Bringing 0uV into 2800000-2800000uV [ 1.993131] ldo4: Bringing 0uV into 1800000-1800000uV [ 2.004223] ldo7: Bringing 0uV into 2000000-2000000uV [ 2.011845] smsc95xx v1.0.4 [ 2.015159] ldo9: bypassed regulator has no supply! [ 2.020286] ldo9: failed to get the current voltage(-517) [ 2.025956] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 2.041304] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 2.064324] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 2.068114] smsc95xx 1-3:1.0 eth0: register 'smsc95xx' at usb-4a064c00.ehci-3, smsc95xx USB 2.0 Ethernet, ee:d0:6d:ae:43:c2 [ 2.082420] omap-dwc3 4a020000.omap_dwc3: vbus init failed [ 2.112291] smps9: Bringing 0uV into 2100000-2100000uV [ 2.130953] ldo9: bypassed regulator has no supply! [ 2.136077] ldo9: failed to get the current voltage(-517) [ 2.141744] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 2.156232] palmas-rtc 48070000.i2c:palmas@48:rtc: setting system clock to 2000-01-01 00:30:36 UTC (946686636) [ 2.172131] pbias_mmc_omap5: disabling [ 2.176078] vmmcsdio_fixed: disabling [ 2.180617] Waiting for root device /dev/mmcblk1p2... [ 2.293553] usb 1-2: new high-speed USB device number 3 using ehci-omap [ 2.429412] hub 1-2:1.0: USB hub found [ 2.433416] hub 1-2:1.0: 3 ports detected [ 2.439289] omap-dwc3 4a020000.omap_dwc3: vbus init failed [ 2.467288] smps9: Bringing 0uV into 2100000-2100000uV [ 2.485962] ldo9: bypassed regulator has no supply! [ 2.491082] ldo9: failed to get the current voltage(-517) [ 2.496747] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator
[PYBOOT] [omap5uevm 02:03]: Timed out waiting for "<type 'str'>":
[PYBOOT] [omap5uevm 02:04]: got exception: timeout ~$off
[PYBOOT] [omap5uevm 02:05]: Done.
========================================================================
Board omap5uevm-arm-omap2plus_defconfig failure log: -------------------------------------------------
[ 3.998638] ldo9: bypassed regulator has no supply! [ 4.003768] ldo9: failed to get the current voltage(-517) [ 4.009447] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 4.032321] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 4.040011] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 4.046557] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer cd [ 4.052876] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 4.059747] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/ocp/mmc@4809c000[0]' [ 4.069329] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/ocp/mmc@4809c000[0]' [ 4.078809] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 4.085874] omap_hsmmc 4809c000.mmc: lookup for GPIO cd failed [ 4.092010] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer wp [ 4.098299] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 4.105160] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@4809c000[0]' [ 4.114742] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@4809c000[0]' [ 4.124243] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 4.131291] omap_hsmmc 4809c000.mmc: lookup for GPIO wp failed [ 4.149944] omap_hsmmc 480ad000.mmc: GPIO lookup for consumer wp [ 4.156243] omap_hsmmc 480ad000.mmc: using device tree for GPIO lookup [ 4.163107] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@480ad000[0]' [ 4.172693] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@480ad000[0]' [ 4.182188] omap_hsmmc 480ad000.mmc: using lookup tables for GPIO lookup [ 4.189225] omap_hsmmc 480ad000.mmc: lookup for GPIO wp failed [ 4.210311] smps9: Bringing 0uV into 2100000-2100000uV [ 4.239915] ldo9: bypassed regulator has no supply! [ 4.245025] ldo9: failed to get the current voltage(-517) [ 4.250711] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 4.270817] hctosys: unable to open rtc device (rtc0) [ 4.276107] sr_init: No PMIC hook to init smartreflex [ 4.281616] sr_init: platform driver register failed for SR [ 4.309305] pbias_mmc_omap5: disabling [ 4.313242] vmmcsdio_fixed: disabling [ 4.319391] Waiting for root device /dev/mmcblk1p2...
[PYBOOT] [omap5uevm 02:03]: Timed out waiting for "<type 'str'>":
[PYBOOT] [omap5uevm 02:04]: got exception: timeout ~$off
[PYBOOT] [omap5uevm 02:05]: Done.
========================================================================
Board pi-arm-multi_lpae_defconfig failure log: -------------------------------------------------
[ 1.538918] isl29018 7-0044: No cache defaults, reading back from HW [ 1.545272] isl29018 7-0044: Failed to read 1: -6 [ 1.549855] isl29018 7-0044: regmap initialization fails: -6 [ 1.560791] NET: Registered protocol family 10 [ 1.565228] sit: IPv6 over IPv4 tunneling driver [ 1.568801] NET: Registered protocol family 17 [ 1.572806] can: controller area network core (rev 20120528 abi 9) [ 1.578997] NET: Registered protocol family 29 [ 1.583384] can: raw protocol (rev 20120528) [ 1.587633] can: broadcast manager protocol (rev 20120528 t) [ 1.593276] can: netlink gateway (rev 20130117) max_hops=1 [ 1.599000] Key type dns_resolver registered [ 1.603327] ThumbEE CPU extension supported. [ 1.607245] Registering SWP/SWPB emulation handler [ 1.617178] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.622660] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.629025] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.634399] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 1.644502] input: gpio-keys as /devices/platform/gpio-keys/input/input1 [ 1.654845] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.660291] mmc_host mmc0: Bus speed (slot 0) = 200000000Hz (slot req 200000000Hz, actual 200000000HZ div = 0) [ 1.670475] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.676658] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.682035] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 1.691762] max77686-rtc max77802-rtc: hctosys: unable to read the hardware clock [ 1.714456] Waiting for root device /dev/mmcblk0p1... [ 1.718337] mmc0: tuning execution failed: -5 [ 1.722396] mmc0: error -5 whilst initialising MMC card [ 2.583701] asix 1-1:1.0 eth0: register 'asix' at usb-xhci-hcd.2.auto-1, ASIX AX88772 USB 2.0 Ethernet, c8:b3:73:46:fb:95 [ 2.597876] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 2.603340] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 2.609711] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 2.615095] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo
[PYBOOT] [pi 01:56]: Timed out waiting for "<type 'str'>":
[PYBOOT] [pi 01:57]: got exception: timeout ~$off
[PYBOOT] [pi 01:58]: Done.
========================================================================
Board pi-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.533419] isl29018 7-0044: No cache defaults, reading back from HW [ 1.539772] isl29018 7-0044: Failed to read 1: -6 [ 1.544356] isl29018 7-0044: regmap initialization fails: -6 [ 1.555246] NET: Registered protocol family 10 [ 1.559684] sit: IPv6 over IPv4 tunneling driver [ 1.563260] NET: Registered protocol family 17 [ 1.567263] can: controller area network core (rev 20120528 abi 9) [ 1.573454] NET: Registered protocol family 29 [ 1.577841] can: raw protocol (rev 20120528) [ 1.582090] can: broadcast manager protocol (rev 20120528 t) [ 1.587732] can: netlink gateway (rev 20130117) max_hops=1 [ 1.593455] Key type dns_resolver registered [ 1.597781] ThumbEE CPU extension supported. [ 1.601701] Registering SWP/SWPB emulation handler [ 1.611595] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.617071] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.623438] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.628813] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 1.638907] input: gpio-keys as /devices/platform/gpio-keys/input/input1 [ 1.649253] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.654698] mmc_host mmc0: Bus speed (slot 0) = 200000000Hz (slot req 200000000Hz, actual 200000000HZ div = 0) [ 1.664882] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.671062] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.676440] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 1.686176] max77686-rtc max77802-rtc: hctosys: unable to read the hardware clock [ 1.708730] Waiting for root device /dev/mmcblk0p1... [ 1.712619] mmc0: tuning execution failed: -5 [ 1.716672] mmc0: error -5 whilst initialising MMC card [ 2.583209] asix 1-1:1.0 eth0: register 'asix' at usb-xhci-hcd.2.auto-1, ASIX AX88772 USB 2.0 Ethernet, c8:b3:73:46:fb:95 [ 2.597351] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 2.602809] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 2.609183] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 2.614566] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo
[PYBOOT] [pi 01:53]: Timed out waiting for "<type 'str'>":
[PYBOOT] [pi 01:54]: got exception: timeout ~$off
[PYBOOT] [pi 01:55]: Done.