Failed boards:
bbb multi_v7_defconfig : FAILED 1:20.11 panda multi_v7_defconfig : FAILED 1:34.92
Successful boards:
apc vt8500_v6_v7_defconfig : passed 1:10.82 arndale exynos_defconfig : passed 1:10.09 bbb omap2plus_defconfig : passed 1:37.54 beaver tegra_defconfig : passed 0:57.46 beaver multi_v7_defconfig : passed 0:52.67 capri bcm_defconfig : passed 0:42.86 capri multi_v7_defconfig : passed 0:44.49 cubie sunxi_defconfig : passed 0:56.39 cubie multi_v7_defconfig : passed 0:57.20 cubie2 sunxi_defconfig : passed 0:52.35 cubie2 multi_v7_defconfig : passed 0:58.88 cubie2 multi_lpae_defconfig : passed 0:53.17 cubox dove_defconfig : warnings 1:06.78 dalmore tegra_defconfig : passed 1:29.52 dalmore multi_v7_defconfig : passed 1:16.12 dalmore multi_lpae_defconfig : passed 1:19.66 panda omap2plus_defconfig : passed 1:15.03 sama5 sama5_defconfig : passed 1:51.99 seaboard tegra_defconfig : passed 1:05.59 seaboard multi_v7_defconfig : passed 1:08.05 snow exynos_defconfig : passed 1:21.06 snowball u8500_defconfig : passed 1:22.40 snowball multi_v7_defconfig : passed 2:08.70 trimslice tegra_defconfig : passed 1:02.26 trimslice multi_v7_defconfig : passed 1:00.81 wandboard imx_v6_v7_defconfig : passed 1:01.06 wandboard multi_v7_defconfig : passed 1:07.41
Board legend is available at http://arm-soc.lixom.net/boards.html
Last entries of failed logs below:
========================================================================
Board bbb-multi_v7_defconfig failure log: -------------------------------------------------
Using cpsw device TFTP from server 172.16.1.3; our IP address is 172.16.1.118 Filename 'arm-soc/v3.13-rc5-786-gf47ebb2/multi_v7_defconfig/zImage'. Load address: 0x80200000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ##################################### 1.2 MiB/s done Bytes transferred = 4350224 (426110 hex) U-Boot# setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 U-Boot# tftp 0x81f00000 arm-soc/v3.13-rc5-786-gf47ebb2/multi_v7_defconfig/dtbs/am335x-boneblack.dtb tftp 0x81f00000 arm-soc/v3.13-rc5-786-gf47ebb2/multi_v7_defconfig/dtbs/am335x-boneblack.dtb link up on port 0, speed 100, full duplex Using cpsw device TFTP from server 172.16.1.3; our IP address is 172.16.1.118 Filename 'arm-soc/v3.13-rc5-786-gf47ebb2/multi_v7_defconfig/dtbs/am335x-boneblack.dtb'. Load address: 0x81f00000 Loading: *## 624 KiB/s done Bytes transferred = 17911 (45f7 hex) U-Boot# setenv bootargs console=ttyO0,115200 root=/dev/mmcblk0p2 rootwait rw debug earlyprintk setenv bootargs console=ttyO0,115200 root=/dev/mmcblk0p2 rootwait rw debug earlyprintk U-Boot# printenv bootargs printenv bootargs bootargs=console=ttyO0,115200 root=/dev/mmcblk0p2 rootwait rw debug earlyprintk U-Boot# bootz 0x80200000 - 0x81f00000 bootz 0x80200000 - 0x81f00000 ## Flattened Device Tree blob at 81f00000 Booting using the fdt blob at 0x81f00000 Using Device Tree in place at 81f00000, end 81f075f6
Starting kernel ...
~$off # PYBOOT: Exception: timeout
========================================================================
Board panda-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.415130] omap-dma-engine 4a056000.dma-controller: freeing channel for 62 [ 1.422485] platform 4809c000.mmc: Driver omap_hsmmc requests probe deferral [ 1.429931] omap_hsmmc 480d5000.mmc: could not find pctldev for node /ocp/pinmux@4a100040/pinmux_wl12xx_pins, deferring probe [ 1.441833] platform 480d5000.mmc: Driver omap_hsmmc requests probe deferral [ 1.449493] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.456298] usbcore: registered new interface driver usbhid [ 1.462158] usbhid: USB HID core driver [ 1.469146] TCP: cubic registered [ 1.472625] NET: Registered protocol family 17 [ 1.477478] Key type dns_resolver registered [ 1.482360] Power Management for TI OMAP4+ devices. [ 1.487518] Power Management for TI OMAP4. [ 1.491821] OMAP4 PM: u-boot >= v2012.07 is required for full PM support [ 1.499176] Registering SWP/SWPB emulation handler [ 1.504913] reg-fixed-voltage wl12xx_vmmc.10: could not find pctldev for node /ocp/pinmux@4a100040/pinmux_wl12xx_gpio, deferring probe [ 1.517608] platform wl12xx_vmmc.10: Driver reg-fixed-voltage requests probe deferral [ 1.526245] omap_i2c 48070000.i2c: could not find pctldev for node /ocp/pinmux@4a100040/pinmux_i2c1_pins, deferring probe [ 1.537750] platform 48070000.i2c: Driver omap_i2c requests probe deferral [ 1.545257] omap_i2c 48072000.i2c: could not find pctldev for node /ocp/pinmux@4a100040/pinmux_i2c2_pins, deferring probe [ 1.556762] platform 48072000.i2c: Driver omap_i2c requests probe deferral [ 1.556854] omap_i2c 48060000.i2c: could not find pctldev for node /ocp/pinmux@4a100040/pinmux_i2c3_pins, deferring probe [ 1.575775] platform 48060000.i2c: Driver omap_i2c requests probe deferral [ 1.583282] omap_i2c 48350000.i2c: could not find pctldev for node /ocp/pinmux@4a100040/pinmux_i2c4_pins, deferring probe [ 1.594787] platform 48350000.i2c: Driver omap_i2c requests probe deferral [ 1.602600] omap-dma-engine 4a056000.dma-controller: allocating channel for 62 [ 1.610198] omap-dma-engine 4a056000.dma-controller: allocating channel for 61 [ 1.617828] omap_hsmmc 4809c000.mmc: vmmc regulator missing [ 1.623687] omap-dma-engine 4a056000.dma-controller: freeing channel for 61 [ 1.630981] omap-dma-engine 4a056000.dma-controller: freeing channel for 62 [ 1.638336] platform 4809c000.mmc: Driver omap_hsmmc requests probe deferral [ 1.646057] omap_hsmmc 480d5000.mmc: could not find pctldev for node /ocp/pinmux@4a100040/pinmux_wl12xx_pins, deferring probe [ 1.657928] platform 480d5000.mmc: Driver omap_hsmmc requests probe deferral [ 1.665496] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 1.666442] spear_cpufreq: Invalid cpufreq_tbl [ 1.679046] ALSA device list: [ 1.679046] No soundcards found. [ 1.686157] omap_uart 48020000.serial: no wakeirq for uart2 [ 1.692352] Waiting for root device /dev/mmcblk0p2... ~$off # PYBOOT: Exception: timeout