Tree/Branch: next Git describe: next-20140513 Failed boot tests (console logs at the end) =========================================== tegra30-beaver: FAIL: arm-tegra_defconfig armada-xp-openblocks-ax3-4: FAIL: arm-multi_v7_defconfig+CONFIG_ARM_LPAE=y omap5-uevm: FAIL: arm-multi_v7_defconfig+CONFIG_ARM_LPAE=y sun7i-a20-cubieboard2: FAIL: arm-multi_v7_defconfig+CONFIG_ARM_LPAE=y imx6dl-wandboard,wand-dual: FAIL: arm-imx_v6_v7_defconfig imx6dl-wandboard,wand-solo: FAIL: arm-imx_v6_v7_defconfig imx6q-wandboard: FAIL: arm-imx_v6_v7_defconfig am335x-boneblack: FAIL: arm-omap2plus_defconfig omap3-beagle-xm: FAIL: arm-omap2plus_defconfig omap4-panda: FAIL: arm-omap2plus_defconfig omap3-overo-tobi: FAIL: arm-omap2plus_defconfig omap3-overo-storm-tobi: FAIL: arm-omap2plus_defconfig omap5-uevm: FAIL: arm-omap2plus_defconfig omap3-n900: FAIL: arm-omap2plus_defconfig omap4-panda-es: FAIL: arm-omap2plus_defconfig tegra30-beaver: FAIL: arm-multi_v7_defconfig am335x-boneblack: FAIL: arm-multi_v7_defconfig omap3-beagle-xm: FAIL: arm-multi_v7_defconfig sun7i-a20-cubieboard2: FAIL: arm-multi_v7_defconfig armada-370-mirabox: FAIL: arm-multi_v7_defconfig omap4-panda: FAIL: arm-multi_v7_defconfig armada-xp-openblocks-ax3-4: FAIL: arm-multi_v7_defconfig sun4i-a10-cubieboard: FAIL: arm-multi_v7_defconfig bcm28155-ap: FAIL: arm-multi_v7_defconfig omap3-overo-tobi: FAIL: arm-multi_v7_defconfig imx6dl-wandboard,wand-solo: FAIL: arm-multi_v7_defconfig omap3-overo-storm-tobi: FAIL: arm-multi_v7_defconfig omap5-uevm: FAIL: arm-multi_v7_defconfig omap3-n900: FAIL: arm-multi_v7_defconfig imx6q-wandboard: FAIL: arm-multi_v7_defconfig omap4-panda-es: FAIL: arm-multi_v7_defconfig imx6dl-wandboard,wand-dual: FAIL: arm-multi_v7_defconfig sun7i-a20-cubieboard2: FAIL: arm-sunxi_defconfig sun4i-a10-cubieboard: FAIL: arm-sunxi_defconfig bcm28155-ap: FAIL: arm-bcm_defconfig exynos5250-arndale: FAIL: arm-exynos_defconfig armada-xp-openblocks-ax3-4: FAIL: arm-mvebu_v7_defconfig armada-370-mirabox: FAIL: arm-mvebu_v7_defconfig sama5d35ek: FAIL: arm-sama5_defconfig
Full Report ===========
arm-davinci_all_defconfig ------------------------- legacy,dm365evm 0 min 17.4 sec: PASS da850-evm 0 min 15.6 sec: PASS
arm-tegra_defconfig ------------------- tegra30-beaver 1 min 42.0 sec: FAIL
arm-multi_v7_defconfig+CONFIG_ARM_LPAE=y ---------------------------------------- armada-xp-openblocks-ax3-4 0 min 50.6 sec: FAIL omap5-uevm 1 min 20.2 sec: FAIL sun7i-a20-cubieboard2 0 min 40.0 sec: FAIL
arm-imx_v6_v7_defconfig ----------------------- imx6dl-wandboard,wand-dual 0 min 42.8 sec: FAIL imx6dl-wandboard,wand-solo 0 min 43.1 sec: FAIL imx6q-wandboard 0 min 41.1 sec: FAIL
arm-omap2plus_defconfig ----------------------- legacy,3730xm 0 min 49.2 sec: PASS am335x-boneblack 1 min 48.8 sec: FAIL omap3-beagle-xm 1 min 15.9 sec: FAIL legacy,3530beagle 0 min 36.3 sec: PASS (Warnings: 1) omap4-panda 1 min 20.6 sec: FAIL omap3-overo-tobi 0 min 48.1 sec: FAIL am335x-bone 0 min 35.8 sec: PASS omap3-overo-storm-tobi 0 min 46.2 sec: FAIL omap5-uevm 1 min 16.5 sec: FAIL omap3-n900 0 min 33.5 sec: FAIL legacy,n900 0 min 16.9 sec: PASS (Warnings: 1) omap4-panda-es 1 min 19.8 sec: FAIL legacy,3730storm 0 min 23.0 sec: PASS legacy,3530overo 0 min 21.0 sec: PASS (Warnings: 1)
arm-multi_v7_defconfig ---------------------- qcom-apq8074-dragonboard 0 min 16.2 sec: PASS ste-snowball 1 min 32.7 sec: PASS tegra30-beaver 0 min 41.9 sec: FAIL am335x-boneblack 1 min 49.1 sec: FAIL omap3-beagle-xm 1 min 20.5 sec: FAIL sun7i-a20-cubieboard2 0 min 39.9 sec: FAIL armada-370-mirabox 0 min 49.5 sec: FAIL omap4-panda 1 min 22.9 sec: FAIL armada-xp-openblocks-ax3-4 0 min 51.7 sec: FAIL sun4i-a10-cubieboard 0 min 44.7 sec: FAIL bcm28155-ap 1 min 52.8 sec: FAIL omap3-overo-tobi 0 min 48.1 sec: FAIL imx6dl-wandboard,wand-solo 0 min 42.7 sec: FAIL am335x-bone 0 min 35.6 sec: PASS omap3-overo-storm-tobi 0 min 49.0 sec: FAIL omap5-uevm 1 min 18.8 sec: FAIL omap3-n900 0 min 33.5 sec: FAIL imx6q-wandboard 0 min 41.0 sec: FAIL omap4-panda-es 1 min 22.4 sec: FAIL imx6dl-wandboard,wand-dual 0 min 42.5 sec: FAIL
arm-sunxi_defconfig ------------------- sun7i-a20-cubieboard2 0 min 39.0 sec: FAIL sun4i-a10-cubieboard 0 min 43.5 sec: FAIL
arm-bcm_defconfig ----------------- bcm28155-ap 1 min 49.9 sec: FAIL
arm-exynos_defconfig -------------------- exynos5420-arndale-octa 0 min 31.6 sec: PASS exynos5250-arndale 1 min 55.7 sec: FAIL
arm-u8500_defconfig ------------------- ste-snowball 0 min 46.8 sec: PASS
arm-mvebu_v7_defconfig ---------------------- armada-xp-openblocks-ax3-4 0 min 49.5 sec: FAIL armada-370-mirabox 0 min 48.3 sec: FAIL
arm-sama5_defconfig ------------------- sama5d35ek 1 min 2.7 sec: FAIL
Console logs for failures =========================
arm-tegra_defconfig -------------------
tegra30-beaver: FAIL: last 40 lines of boot log: ------------------------------------------------
[ 0.895342] usbcore: registered new interface driver smsc75xx [ 0.901135] usbcore: registered new interface driver smsc95xx [ 0.906938] usbcore: registered new interface driver net1080 [ 0.912649] usbcore: registered new interface driver cdc_subset [ 0.918602] usbcore: registered new interface driver zaurus [ 0.924295] usbcore: registered new interface driver cdc_ncm [ 0.929897] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.936451] ehci-pci: EHCI PCI platform driver [ 0.941048] tegra-ehci: Tegra EHCI driver [ 0.945408] usbcore: registered new interface driver cdc_acm [ 0.950734] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [ 0.958914] usbcore: registered new interface driver cdc_wdm [ 0.964668] usbcore: registered new interface driver usb-storage [ 0.971266] mousedev: PS/2 mouse device common for all mice [ 0.978002] usbcore: registered new interface driver uvcvideo [ 0.982035] USB Video Class driver (1.1.1) [ 0.986187] gspca_main: v2.14.0 registered [ 0.990940] sdhci: Secure Digital Host Controller Interface driver [ 0.996612] sdhci: Copyright(c) Pierre Ossman [ 1.001008] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.007459] usbcore: registered new interface driver usbhid [ 1.012372] usbhid: USB HID core driver [ 1.019658] TCP: cubic registered [ 1.021397] NET: Registered protocol family 10 [ 1.026859] mip6: Mobile IPv6 [ 1.028690] sit: IPv6 over IPv4 tunneling driver [ 1.035689] NET: Registered protocol family 17 [ 1.038347] NET: Registered protocol family 15 [ 1.042922] Bluetooth: RFCOMM socket layer initialized [ 1.048025] Bluetooth: RFCOMM ver 1.11 [ 1.051856] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 1.057207] Bluetooth: BNEP socket layer initialized [ 1.062242] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 1.068213] Bluetooth: HIDP socket layer initialized [ 1.074319] Registering SWP/SWPB emulation handler [ 1.078817] bootconsole [earlycon0] disabled ~$off # PYBOOT: Exception: kernel: ERROR: failed to boot: <class 'pexpect.TIMEOUT'> # PYBOOT: Time: 102.02 seconds. # PYBOOT: Result: FAIL
arm-multi_v7_defconfig+CONFIG_ARM_LPAE=y ----------------------------------------
armada-xp-openblocks-ax3-4: FAIL: last 40 lines of boot log: ------------------------------------------------------------
Bytes transferred = 4739550 (4851de hex) openblocks> tftp 0x03000000 192.168.1.2:buildroot.cpio.gz.uboot tftp 0x03000000 192.168.1.2:buildroot.cpio.gz.uboot Using egiga0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.158 Filename 'buildroot.cpio.gz.uboot'. Load address: 0x3000000 Loading: *############################################ done Bytes transferred = 642602 (9ce2a hex) openblocks> printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 debug earlyprintk openblocks>bootm 0x02000000 0x03000000 bootm 0x02000000 0x03000000 ## Booting kernel from Legacy Image at 02000000 ... Image Name: Linux Created: 2014-05-13 10:07:19 UTC Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 4739486 Bytes = 4.5 MiB Load Address: 00008000 Entry Point: 00008000 Verifying Checksum ... OK ## Loading init Ramdisk from Legacy Image at 03000000 ... Image Name: Created: 2014-02-07 19:37:29 UTC Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK Loading Kernel Image ... OK OK
Starting kernel ...
~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 50.64 seconds. # PYBOOT: Result: FAIL
omap5-uevm: FAIL: last 40 lines of boot log: --------------------------------------------
Load address: 0x82000000 Loading: *T ############################################ 94.7 KiB/s done Bytes transferred = 642602 (9ce2a hex) U-Boot# tftp 0x81f00000 192.168.1.2:tmp/omap5uevm-haDix_/omap5-uevm.dtb tftp 0x81f00000 192.168.1.2:tmp/omap5uevm-haDix_/omap5-uevm.dtb Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.201 Filename 'tmp/omap5uevm-haDix_/omap5-uevm.dtb'. Load address: 0x81f00000 Loading: *EHCI timed out on TD - token=0x8008d80 T #### 4.9 KiB/s done Bytes transferred = 45220 (b0a4 hex) U-Boot# printenv bootargs printenv bootargs bootargs=console=ttyO2,115200n8 debug earlyprintk ip=192.168.1.201:192.168.1.2:192.168.1.254:255.255.255.0:::none:192.168.1.254 U-Boot# bootz 0x81000000 0x82000000 0x81f00000 bootz 0x81000000 0x82000000 0x81f00000 Kernel image @ 0x81000000 [ 0x000000 - 0x481640 ] ## Loading init Ramdisk from Legacy Image at 82000000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 81f00000 Booting using the fdt blob at 0x81f00000 Using Device Tree in place at 81f00000, end 81f0e0a3
Starting kernel ...
~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 80.22 seconds. # PYBOOT: Result: FAIL
sun7i-a20-cubieboard2: FAIL: last 40 lines of boot log: -------------------------------------------------------
Filename 'buildroot.cpio.gz.uboot'. Load address: 0x43000000 Loading: *############################################ 2.7 MiB/s done Bytes transferred = 642602 (9ce2a hex) sun7i# tftp 0x42000000 192.168.1.2:tmp/cubie2-ONaxrZ/sun7i-a20-cubieboard2.dtb tftp 0x42000000 192.168.1.2:tmp/cubie2-ONaxrZ/sun7i-a20-cubieboard2.dtb Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.186 Filename 'tmp/cubie2-ONaxrZ/sun7i-a20-cubieboard2.dtb'. Load address: 0x42000000 Loading: *## 2.5 MiB/s done Bytes transferred = 18501 (4845 hex) sun7i# printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.186:192.168.1.2:192.168.1.254:255.255.255.0:::none:192.168.1.254 sun7i# bootz 0x41000000 0x43000000 0x42000000 bootz 0x41000000 0x43000000 0x42000000 Kernel image @ 0x41000000 [ 0x000000 - 0x481640 ] ## Loading init Ramdisk from Legacy Image at 43000000 ... Image Name: Created: 2014-02-07 19:37:29 UTC Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 42000000 Booting using the fdt blob at 0x42000000 Using Device Tree in place at 42000000, end 42007844
Starting kernel ...
~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 39.96 seconds. # PYBOOT: Result: FAIL
arm-imx_v6_v7_defconfig -----------------------
imx6dl-wandboard,wand-dual: FAIL: last 40 lines of boot log: ------------------------------------------------------------
tftp 0x13000000 192.168.1.2:buildroot.cpio.gz.uboot Using FEC device TFTP from server 192.168.1.2; our IP address is 192.168.1.156 Filename 'buildroot.cpio.gz.uboot'. Load address: 0x13000000 Loading: *############################################ 1.5 MiB/s done Bytes transferred = 642602 (9ce2a hex) => tftp 0x12000000 192.168.1.2:tmp/wand-dual-UmhxEH/imx6dl-wandboard.dtb tftp 0x12000000 192.168.1.2:tmp/wand-dual-UmhxEH/imx6dl-wandboard.dtb Using FEC device TFTP from server 192.168.1.2; our IP address is 192.168.1.156 Filename 'tmp/wand-dual-UmhxEH/imx6dl-wandboard.dtb'. Load address: 0x12000000 Loading: *## 1.5 MiB/s done Bytes transferred = 26881 (6901 hex) => printenv bootargs printenv bootargs bootargs=console=ttymxc0,115200 rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.156:192.168.1.2:192.168.1.254:255.255.255.0:::none:192.168.1.254 => bootz 0x11000000 0x13000000 0x12000000 bootz 0x11000000 0x13000000 0x12000000 ## Loading init Ramdisk from Legacy Image at 13000000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 ## Flattened Device Tree blob at 12000000 Booting using the fdt blob at 0x12000000 Using Device Tree in place at 12000000, end 12009900
Starting kernel ...
~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 42.76 seconds. # PYBOOT: Result: FAIL
imx6dl-wandboard,wand-solo: FAIL: last 40 lines of boot log: ------------------------------------------------------------
tftp 0x13000000 192.168.1.2:buildroot.cpio.gz.uboot Using FEC device TFTP from server 192.168.1.2; our IP address is 192.168.1.164 Filename 'buildroot.cpio.gz.uboot'. Load address: 0x13000000 Loading: *############################################ 1.5 MiB/s done Bytes transferred = 642602 (9ce2a hex) =>tftp 0x12000000 192.168.1.2:tmp/wand-solo-6yvny9/imx6dl-wandboard.dtb tftp 0x12000000 192.168.1.2:tmp/wand-solo-6yvny9/imx6dl-wandboard.dtb Using FEC device TFTP from server 192.168.1.2; our IP address is 192.168.1.164 Filename 'tmp/wand-solo-6yvny9/imx6dl-wandboard.dtb'. Load address: 0x12000000 Loading: *## 1.3 MiB/s done Bytes transferred = 26881 (6901 hex) => printenv bootargs printenv bootargs bootargs=console=ttymxc0,115200 rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.164:192.168.1.2:192.168.1.254:255.255.255.0:::none:192.168.1.254 => bootz 0x11000000 0x13000000 0x12000000 bootz 0x11000000 0x13000000 0x12000000 ## Loading init Ramdisk from Legacy Image at 13000000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 ## Flattened Device Tree blob at 12000000 Booting using the fdt blob at 0x12000000 Using Device Tree in place at 12000000, end 12009900
Starting kernel ...
~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 43.09 seconds. # PYBOOT: Result: FAIL
imx6q-wandboard: FAIL: last 40 lines of boot log: -------------------------------------------------
TFTP from server 192.168.1.2; our IP address is 192.168.1.163 Filename 'buildroot.cpio.gz.uboot'. Load address: 0x13000000 Loading: *############################################ 2.7 MiB/s done Bytes transferred = 642602 (9ce2a hex) => tftp 0x12000000 192.168.1.2:tmp/wand-quad-JSQ6PF/imx6q-wandboard.dtb tftp 0x12000000 192.168.1.2:tmp/wand-quad-JSQ6PF/imx6q-wandboard.dtb Using FEC device TFTP from server 192.168.1.2; our IP address is 192.168.1.163 Filename 'tmp/wand-quad-JSQ6PF/imx6q-wandboard.dtb'. Load address: 0x12000000 Loading: *### 2.6 MiB/s done Bytes transferred = 29638 (73c6 hex) =>printenv bootargs printenv bootargs bootargs=console=ttymxc0,115200 ip=192.168.1.163:192.168.1.2::255.255.255.0:::none:192.168.1.254 => bootz 0x11000000 0x13000000 0x12000000 bootz 0x11000000 0x13000000 0x12000000 Kernel image @ 0x11000000 [ 0x000000 - 0x505d98 ] ## Loading init Ramdisk from Legacy Image at 13000000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 12000000 Booting using the fdt blob at 0x12000000 Using Device Tree in place at 12000000, end 1200a3c5
Starting kernel ...
~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 41.07 seconds. # PYBOOT: Result: FAIL
arm-omap2plus_defconfig -----------------------
am335x-boneblack: FAIL: last 40 lines of boot log: --------------------------------------------------
[ 0.781645] io scheduler cfq registered (default) [ 0.784489] pinctrl-single 44e10800.pinmux: 142 pins at pa f9e10800 size 568 [ 0.787966] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.797760] omap_uart 44e09000.serial: no wakeirq for uart0 [ 0.798595] 44e09000.serial: ttyO0 at MMIO 0x44e09000 (irq = 88, base_baud = 3000000) is a OMAP UART0 [ 1.444794] console [ttyO0] enabled [ 1.491849] brd: module loaded [ 1.520527] loop: module loaded [ 1.528121] mtdoops: mtd device (mtddev=name/number) must be supplied [ 1.538876] usbcore: registered new interface driver asix [ 1.544802] usbcore: registered new interface driver ax88179_178a [ 1.551495] usbcore: registered new interface driver cdc_ether [ 1.557972] usbcore: registered new interface driver smsc95xx [ 1.564218] usbcore: registered new interface driver net1080 [ 1.570448] usbcore: registered new interface driver cdc_subset [ 1.576870] usbcore: registered new interface driver zaurus [ 1.583143] usbcore: registered new interface driver cdc_ncm [ 1.591431] usbcore: registered new interface driver cdc_wdm [ 1.597841] usbcore: registered new interface driver usb-storage [ 1.604455] usbcore: registered new interface driver usbtest [ 1.619429] mousedev: PS/2 mouse device common for all mice [ 1.630558] i2c /dev entries driver [ 1.634376] Driver for 1-wire Dallas network protocol. [ 1.642434] ledtrig-cpu: registered to indicate activity on CPUs [ 1.649724] usbcore: registered new interface driver usbhid [ 1.655576] usbhid: USB HID core driver [ 1.661061] oprofile: using arm/armv7 [ 1.665826] TCP: cubic registered [ 1.669497] Initializing XFRM netlink socket [ 1.674184] NET: Registered protocol family 17 [ 1.679044] NET: Registered protocol family 15 [ 1.684203] Key type dns_resolver registered [ 1.690682] ThumbEE CPU extension supported. [ 1.695247] Registering SWP/SWPB emulation handler [ 1.710228] /home/buildslave/workspace/khilman-kbuilder/next/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 13.871927] Waiting for root device /dev/mmcblk0p2... ~$off # PYBOOT: Exception: kernel: ERROR: failed to boot: <class 'pexpect.TIMEOUT'> # PYBOOT: Time: 108.77 seconds. # PYBOOT: Result: FAIL
omap3-beagle-xm: FAIL: last 40 lines of boot log: -------------------------------------------------
TFTP from server 192.168.1.2; our IP address is 192.168.1.190 Filename 'buildroot.cpio.gz.uboot'. Load address: 0x82000000 Loading: *T ############################################ 110.4 KiB/s done Bytes transferred = 642602 (9ce2a hex) OMAP3 beagleboard.org # tftp 0x81f00000 192.168.1.2:tmp/3730xm-OWGQ7j/omap3-beagle-xm.dtb tftp 0x81f00000 192.168.1.2:tmp/3730xm-OWGQ7j/omap3-beagle-xm.dtb Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.190 Filename 'tmp/3730xm-OWGQ7j/omap3-beagle-xm.dtb'. Load address: 0x81f00000 Loading: *T ##### 7.8 KiB/s done Bytes transferred = 60981 (ee35 hex) OMAP3 beagleboard.org #printenv bootargs printenv bootargs bootargs=console=ttyO2,115200n8 earlyprintk ip=192.168.1.190:192.168.1.2:192.168.1.254:255.255.255.0:::none:192.168.1.254 OMAP3 beagleboard.org # bootz 0x80200000 0x82000000 0x81f00000 bootz 0x80200000 0x82000000 0x81f00000 ## Loading init Ramdisk from Legacy Image at 82000000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 ## Flattened Device Tree blob at 81f00000 Booting using the fdt blob at 0x81f00000 Loading Ramdisk to 8ff63000, end 8ffffdea ... OK Loading Device Tree to 8ff51000, end 8ff62e34 ... OK
Starting kernel ...
~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 75.87 seconds. # PYBOOT: Result: FAIL
omap4-panda: FAIL: last 40 lines of boot log: ---------------------------------------------
TFTP from server 192.168.1.2; our IP address is 192.168.1.152 Filename 'buildroot.cpio.gz.uboot'. Load address: 0x82000000 Loading: *EHCI timed out on TD - token=0x8008d80 T ############################################ 82 KiB/s done Bytes transferred = 642602 (9ce2a hex) Panda # tftp 0x81f00000 192.168.1.2:tmp/4430panda-AEWMfM/omap4-panda.dtb tftp 0x81f00000 192.168.1.2:tmp/4430panda-AEWMfM/omap4-panda.dtb Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.152 Filename 'tmp/4430panda-AEWMfM/omap4-panda.dtb'. Load address: 0x81f00000 Loading: *T #### 5.9 KiB/s done Bytes transferred = 54887 (d667 hex) Panda # printenv bootargs printenv bootargs bootargs=console=ttyO2,115200n8 debug earlyprintk ip=192.168.1.152:192.168.1.2:192.168.1.254:255.255.255.0:::none:192.168.1.254 Panda # bootz 0x81000000 0x82000000 0x81f00000 bootz 0x81000000 0x82000000 0x81f00000 ## Loading init Ramdisk from Legacy Image at 82000000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 ## Flattened Device Tree blob at 81f00000 Booting using the fdt blob at 0x81f00000 Using Device Tree in place at 81f00000, end 81f10666
Starting kernel ...
~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 80.60 seconds. # PYBOOT: Result: FAIL
omap3-overo-tobi: FAIL: last 40 lines of boot log: --------------------------------------------------
Load address: 0x82000000 Loading: *############################################ 2.4 MiB/s done Bytes transferred = 642602 (9ce2a hex) Overo # tftp 0x81f00000 192.168.1.2:tmp/3530overo-PvsMj2/omap3-overo-tobi.dtb tftp 0x81f00000 192.168.1.2:tmp/3530overo-PvsMj2/omap3-overo-tobi.dtb smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC fe:06:88:cd:08:6f Using smc911x-0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.155 Filename 'tmp/3530overo-PvsMj2/omap3-overo-tobi.dtb'. Load address: 0x81f00000 Loading: *##### 2.3 MiB/s done Bytes transferred = 62205 (f2fd hex) Overo # printenv bootargs printenv bootargs bootargs=console=ttyO2,115200n8 earlyprintk debug ip=192.168.1.155:192.168.1.2:192.168.1.254:255.255.255.0:::none:192.168.1.254 Overo # bootz 0x80200000 0x82000000 0x81f00000 bootz 0x80200000 0x82000000 0x81f00000 ## Loading init Ramdisk from Legacy Image at 82000000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 ## Flattened Device Tree blob at 81f00000 Booting using the fdt blob at 0x81f00000 Loading Ramdisk to 8ff63000, end 8ffffdea ... OK Loading Device Tree to 8ff50000, end 8ff622fc ... OK
Starting kernel ...
~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 48.15 seconds. # PYBOOT: Result: FAIL
omap3-overo-storm-tobi: FAIL: last 40 lines of boot log: --------------------------------------------------------
Using smc911x-0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.195 Filename 'tmp/3730storm-U6QxGu/zImage'. Load address: 0x80200000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################### 2.4 MiB/s done Bytes transferred = 4319792 (41ea30 hex) Overo # tftp 0x81f00000 192.168.1.2:tmp/3730storm-U6QxGu/omap3-overo-storm-tobi.dtb tftp 0x81f00000 192.168.1.2:tmp/3730storm-U6QxGu/omap3-overo-storm-tobi.dtb smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC 00:15:c9:28:f0:11 Using smc911x-0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.195 Filename 'tmp/3730storm-U6QxGu/omap3-overo-storm-tobi.dtb'. Load address: 0x81f00000 Loading: *##### 2.3 MiB/s done Bytes transferred = 63065 (f659 hex) Overo # printenv bootargs printenv bootargs bootargs=console=ttyO2,115200n8 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.195:192.168.1.2:192.168.1.254:255.255.255.0:::none:192.168.1.254 Overo # bootz 0x80200000 - 0x81f00000 bootz 0x80200000 - 0x81f00000 ## Flattened Device Tree blob at 81f00000 Booting using the fdt blob at 0x81f00000 Loading Device Tree to 8ffed000, end 8ffff658 ... OK
Starting kernel ...
~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 46.25 seconds. # PYBOOT: Result: FAIL
omap5-uevm: FAIL: last 40 lines of boot log: --------------------------------------------
Load address: 0x82000000 Loading: *T ############################################ 91.8 KiB/s done Bytes transferred = 642602 (9ce2a hex) U-Boot# tftp 0x81f00000 192.168.1.2:tmp/omap5uevm-43SHMQ/omap5-uevm.dtb tftp 0x81f00000 192.168.1.2:tmp/omap5uevm-43SHMQ/omap5-uevm.dtb Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.201 Filename 'tmp/omap5uevm-43SHMQ/omap5-uevm.dtb'. Load address: 0x81f00000 Loading: *EHCI timed out on TD - token=0x8008d80 T #### 4.9 KiB/s done Bytes transferred = 45220 (b0a4 hex) U-Boot#printenv bootargs printenv bootargs bootargs=console=ttyO2,115200n8 debug earlyprintk ip=192.168.1.201:192.168.1.2:192.168.1.254:255.255.255.0:::none:192.168.1.254 U-Boot# bootz 0x81000000 0x82000000 0x81f00000 bootz 0x81000000 0x82000000 0x81f00000 Kernel image @ 0x81000000 [ 0x000000 - 0x41ea30 ] ## Loading init Ramdisk from Legacy Image at 82000000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 81f00000 Booting using the fdt blob at 0x81f00000 Using Device Tree in place at 81f00000, end 81f0e0a3
Starting kernel ...
~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 76.54 seconds. # PYBOOT: Result: FAIL
omap3-n900: FAIL: last 40 lines of boot log: --------------------------------------------
[ 0.866] SETUP: RD STD DEVICE GET_DESCRIPTOR STRING (value 04, index 0409, length 255 bytes) [ 0.876] SETUP: RD STD DEVICE GET_DESCRIPTOR STRING (value 04, index 0409, length 255 bytes) [ 0.886] SETUP: WR STD INTERFACE SET_INTERFACE value 0000 index 0002 length 0000 [ 0.895] SETUP: RD STD DEVICE GET_DESCRIPTOR STRING (value 04, index 0409, length 255 bytes) [ 1.244] SETUP: WR STD INTERFACE SET_INTERFACE value 0001 index 0002 length 0000 [ 1.252] Flashing interface selected [ 1.256] SETUP: RD STD DEVICE GET_DESCRIPTOR STRING (value 04, index 0409, length 255 bytes) [ 1.266] SETUP: RD VND DEVICE req 01 value 0000 index 0000 length 0004 [ 1.274] Flashing mode entered [ 1.277] SETUP: RD VND DEVICE req 01 value 0000 index 0000 length 0004 [ 1.284] SETUP: RD VND DEVICE req 04 value 0000 index 0000 length 0200 [ 1.292] SETUP: RD VND DEVICE req 03 value 0000 index 0000 length 0004 [ 1.300] SETUP: WR VND DEVICE req 12 value 0000 index 0000 length 0012 [ 1.307] SETUP: RD VND DEVICE req 14 value 0000 index 0000 length 0200 [ 1.315] SETUP: WR VND DEVICE req 42 value 0000 index 0000 length 002d [ 1.322] Image 'kernel' won't fit to the partition, still loading it (4384000 bytes, while maximum is 2097152 bytes) [ 1.333] Receiving kernel (length 4384000) USB device found found at bus 002, device address 118. NOLO version 1.4.10 Version of 'sw-release': <no version> Found device RX-51, hardware revision 0010 Sending kernel image (4281 kB)... 2% (128 of 4281 kB, 4740 kB/s) 5% (256 of 4281 kB, 6564 kB/s) 8% (384 of 4281 kB, 7529 kB/s) 11% (512 of 4281 kB, 8000 kB/s) 14% (640 of 4281 kB, 8421 kB/s) 17% (768 of 4281 kB, 8727 kB/s) 20% (896 of 4281 kB, 8871 kB/s) 23% (1024 of 4281 kB, 9061 kB/s) 26% (1152 of 4281 kB, 9216 kB/s) 29% (1280 of 4281 kB, 9275 kB/s) 32% (1408 of 4281 kB, 9386 kB/s) 35% (1536 of 4281 kB, 9481 kB/s) 38% (1664 of 4281 kB, 9563 kB/s) 41% (1792 of 4281 kB, 9582 kB/s) 44% (1920 of 4281 kB, 9458 kB/s) 47% (2048 of 4281 kB, 9525 kB/s) 50% (2176 of 4281 kB, 9585 kB/s) 53% (2304 of 4281 kB, 9600 kB/s) 56% (2432 of 4281 kB, 9650 kB/s) 59% (2560 of 4281 kB, 9696 kB/s) 62% (2688 of 4281 kB, 9703 kB/s) 65% (2816 of 4281 kB, 9743 kB/s) 68% (2944 of 4281 kB, 9780 kB/s) 71% (3072 of 4281 kB, 9783 kB/s) 74% (3200 of 4281 kB, 9815 kB/s) 77% (3328 of 4281 kB, 9846 kB/s) 80% (3456 of 4281 kB, 9874 kB/s) 83% (3584 of 4281 kB, 9900 kB/s) 86% (3712 of 4281 kB, 9898 kB/s) 89% (3840 of 4281 kB, 9922 kB/s) 92% (3968 of 4281 kB, 9797 kB/s) 95% (4096 of 4281 kB, 9822 kB/s) 98% (4224 of 4281 kB, 9823 kB/s)100% (4281 of 4281 kB, avg. 9841 kB/s) [ 1.758] Image successfully received [ 1.858] SETUP: WR VND DEVICE req 82 value 0000 index 0000 length 0055 [ 1.866] SETUP: WR STD INTERFACE SET_