Automated DT boot report for various ARM defconfigs.
Tree/Branch: mainline Git describe: v3.12-1713-g0b1e73e Failed boot tests (console logs at the end) =========================================== omap3-beagle-xm: FAIL: omap2plus_defconfig omap3-tobi,3730storm: FAIL: omap2plus_defconfig omap3-tobi,3530overo: FAIL: omap2plus_defconfig tegra30-beaver: FAIL: tegra_defconfig tegra30-beaver: FAIL: multi_v7_defconfig omap3-beagle-xm: FAIL: multi_v7_defconfig omap3-tobi,3730storm: FAIL: multi_v7_defconfig omap3-tobi,3530overo: FAIL: multi_v7_defconfig
Full Report ===========
omap2plus_defconfig ------------------- am335x-boneblack PASS: 0 min 29.5 sec omap3-beagle-xm FAIL: 0 min 44.9 sec am335x-bone PASS: 0 min 26.1 sec omap4-panda PASS: 1 min 5.5 sec omap4-panda-es PASS: 1 min 2.9 sec omap3-tobi,3730storm FAIL: 0 min 25.1 sec omap3-tobi,3530overo FAIL: 0 min 27.0 sec
tegra_defconfig --------------- tegra30-beaver FAIL: 1 min 36.2 sec
imx_v6_v7_defconfig ------------------- imx6dl-wandboard,wand-dual PASS: 0 min 16.2 sec imx6dl-wandboard,wand-solo PASS: 0 min 16.0 sec imx6q-wandboard PASS: 0 min 14.8 sec
mvebu_defconfig --------------- armada-xp-openblocks-ax3-4 PASS: 0 min 21.9 sec armada-370-mirabox PASS: 0 min 19.9 sec
exynos_defconfig ---------------- exynos5250-arndale PASS: 0 min 28.8 sec
multi_v7_defconfig ------------------ ste-snowball PASS: 0 min 25.6 sec tegra30-beaver FAIL: 1 min 36.3 sec am335x-boneblack PASS: 0 min 34.4 sec omap3-beagle-xm FAIL: 0 min 42.9 sec armada-370-mirabox PASS: 0 min 20.6 sec omap4-panda PASS: 1 min 5.6 sec omap4-panda-es PASS: 1 min 9.2 sec armada-xp-openblocks-ax3-4 PASS: 0 min 22.8 sec imx6dl-wandboard,wand-solo PASS: 0 min 16.4 sec am335x-bone PASS: 0 min 33.2 sec imx6q-wandboard PASS: 0 min 15.7 sec omap3-tobi,3730storm FAIL: 0 min 28.1 sec imx6dl-wandboard,wand-dual PASS: 0 min 16.6 sec omap3-tobi,3530overo FAIL: 0 min 27.0 sec
u8500_defconfig --------------- ste-snowball PASS: 0 min 36.0 sec
sama5_defconfig --------------- sama5d35ek PASS: 0 min 17.3 sec
Console logs for failures =========================
omap2plus_defconfig -------------------
omap3-beagle-xm: FAIL: last 24 lines of boot log: -------------------------------------------------
Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.152 Filename 'tmp/3730xm-GopJZ0/omap3-beagle-xm.dtb'. Load address: 0x81f00000 Loading: *T # 1000 Bytes/s done Bytes transferred = 12261 (2fe5 hex) OMAP3 beagleboard.org # printenv bootargs printenv bootargs bootargs=console=ttyO2,115200n8 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.152:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none OMAP3 beagleboard.org # bootz ${loadaddr} - 0x81f00000 bootz ${loadaddr} - 0x81f00000 ## Flattened Device Tree blob at 81f00000 Booting using the fdt blob at 0x81f00000 Loading Device Tree to 8fffa000, end 8fffffe4 ... OK
Starting kernel ...
~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 44.85 seconds. # PYBOOT: Result: FAIL
omap3-tobi,3730storm: FAIL: last 24 lines of boot log: ------------------------------------------------------
smc911x: MAC 00:15:c9:28:f0:11 Using smc911x-0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.159 Filename 'tmp/3730storm-v0rDJ9/omap3-tobi.dtb'. Load address: 0x81f00000 Loading: *# 2 MiB/s done Bytes transferred = 12698 (319a hex) Overo #printenv bootargs printenv bootargs bootargs=console=ttyO2,115200n8 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.159:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none Overo # bootz ${loadaddr} - 0x81f00000 bootz ${loadaddr} - 0x81f00000 ## Flattened Device Tree blob at 81f00000 Booting using the fdt blob at 0x81f00000 Loading Device Tree to 8fff9000, end 8ffff199 ... OK
Starting kernel ...
~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 25.09 seconds. # PYBOOT: Result: FAIL
omap3-tobi,3530overo: FAIL: last 24 lines of boot log: ------------------------------------------------------
done Bytes transferred = 12698 (319a hex) Overo # printenv bootargs printenv bootargs bootargs=console=ttyO2,115200n8 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.151:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none Overo # bootz ${loadaddr} 0x81000000 0x81f00000 bootz ${loadaddr} 0x81000000 0x81f00000 ## Loading init Ramdisk from Legacy Image at 81000000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 639744 Bytes = 624.8 KiB Load Address: 81000000 Entry Point: 81000000 ## Flattened Device Tree blob at 81f00000 Booting using the fdt blob at 0x81f00000 Loading Ramdisk to 8ff63000, end 8ffff300 ... OK Loading Device Tree to 8ff5c000, end 8ff62199 ... OK
Starting kernel ...
~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 26.97 seconds. # PYBOOT: Result: FAIL
tegra_defconfig ---------------
tegra30-beaver: FAIL: last 24 lines of boot log: ------------------------------------------------
Tegra30 (Beaver) # if test -n ${initenv}; then run initenv; fi if test -n ${initenv}; then run initenv; fi Tegra30 (Beaver) # if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi (Re)start USB... USB0: USB EHCI 1.00 scanning bus 0 for devices... 1 USB Device(s) found scanning usb for storage devices... 0 Storage Device(s) found scanning usb for ethernet devices... 0 Ethernet Device(s) found Tegra30 (Beaver) # setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no Tegra30 (Beaver) # dhcp dhcp No ethernet found. Tegra30 (Beaver) # dhcp dhcp No ethernet found. Tegra30 (Beaver) # dhcp dhcp No ethernet found. Tegra30 (Beaver) # ~$off # PYBOOT: Exception: u-boot: ERROR: timeout getting DHCP address. # PYBOOT: Time: 96.25 seconds. # PYBOOT: Result: FAIL
multi_v7_defconfig ------------------
tegra30-beaver: FAIL: last 24 lines of boot log: ------------------------------------------------
Tegra30 (Beaver) #if test -n ${initenv}; then run initenv; fi if test -n ${initenv}; then run initenv; fi Tegra30 (Beaver) # if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi (Re)start USB... USB0: USB EHCI 1.00 scanning bus 0 for devices... 1 USB Device(s) found scanning usb for storage devices... 0 Storage Device(s) found scanning usb for ethernet devices... 0 Ethernet Device(s) found Tegra30 (Beaver) # setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no Tegra30 (Beaver) #dhcp dhcp No ethernet found. Tegra30 (Beaver) # dhcp dhcp No ethernet found. Tegra30 (Beaver) # dhcp dhcp No ethernet found. Tegra30 (Beaver) # ~$off # PYBOOT: Exception: u-boot: ERROR: timeout getting DHCP address. # PYBOOT: Time: 96.26 seconds. # PYBOOT: Result: FAIL
omap3-beagle-xm: FAIL: last 24 lines of boot log: -------------------------------------------------
Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.152 Filename 'tmp/3730xm-dUrobv/omap3-beagle-xm.dtb'. Load address: 0x81f00000 Loading: *T # 2 KiB/s done Bytes transferred = 12261 (2fe5 hex) OMAP3 beagleboard.org # printenv bootargs printenv bootargs bootargs=console=ttyO2,115200n8 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.152:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none OMAP3 beagleboard.org # bootz ${loadaddr} - 0x81f00000 bootz ${loadaddr} - 0x81f00000 ## Flattened Device Tree blob at 81f00000 Booting using the fdt blob at 0x81f00000 Loading Device Tree to 8fffa000, end 8fffffe4 ... OK
Starting kernel ...
~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 42.90 seconds. # PYBOOT: Result: FAIL
omap3-tobi,3730storm: FAIL: last 24 lines of boot log: ------------------------------------------------------
smc911x: MAC 00:15:c9:28:f0:11 Using smc911x-0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.159 Filename 'tmp/3730storm-PucTqJ/omap3-tobi.dtb'. Load address: 0x81f00000 Loading: *# 2 MiB/s done Bytes transferred = 12698 (319a hex) Overo # printenv bootargs printenv bootargs bootargs=console=ttyO2,115200n8 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.159:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none Overo # bootz ${loadaddr} - 0x81f00000 bootz ${loadaddr} - 0x81f00000 ## Flattened Device Tree blob at 81f00000 Booting using the fdt blob at 0x81f00000 Loading Device Tree to 8fff9000, end 8ffff199 ... OK
Starting kernel ...
~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 28.08 seconds. # PYBOOT: Result: FAIL
omap3-tobi,3530overo: FAIL: last 24 lines of boot log: ------------------------------------------------------
done Bytes transferred = 12698 (319a hex) Overo #printenv bootargs printenv bootargs bootargs=console=ttyO2,115200n8 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.151:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none Overo # bootz ${loadaddr} 0x81000000 0x81f00000 bootz ${loadaddr} 0x81000000 0x81f00000 ## Loading init Ramdisk from Legacy Image at 81000000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 639744 Bytes = 624.8 KiB Load Address: 81000000 Entry Point: 81000000 ## Flattened Device Tree blob at 81f00000 Booting using the fdt blob at 0x81f00000 Loading Ramdisk to 8ff63000, end 8ffff300 ... OK Loading Device Tree to 8ff5c000, end 8ff62199 ... OK
Starting kernel ...
~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 26.97 seconds. # PYBOOT: Result: FAIL