Failed boards:
arndale exynos_defconfig : FAILED 1:19.90 beaver tegra_defconfig : BUILD FAILED beaver multi_v7_defconfig : FAILED 1:02.04 capri multi_v7_defconfig : FAILED 1:02.53 cubie sunxi_defconfig : FAILED 1:00.21 cubie multi_v7_defconfig : FAILED 1:04.73 cubie2 sunxi_defconfig : FAILED 0:58.31 cubie2 multi_v7_defconfig : FAILED 1:03.29 cubie2 multi_lpae_defconfig : FAILED 0:59.14 cubox dove_defconfig : FAILED 1:11.84 dalmore tegra_defconfig : BUILD FAILED dalmore multi_v7_defconfig : FAILED 1:04.73 dalmore multi_lpae_defconfig : FAILED 1:04.90 panda omap2plus_defconfig : FAILED 1:12.61 panda multi_v7_defconfig : FAILED 1:14.68 seaboard tegra_defconfig : BUILD FAILED snow exynos_defconfig : FAILED 1:11.61 snowball u8500_defconfig : FAILED 1:12.92 snowball multi_v7_defconfig : FAILED 1:05.89 trimslice tegra_defconfig : BUILD FAILED trimslice multi_v7_defconfig : FAILED 1:03.91 wandboard imx_v6_v7_defconfig : FAILED 1:00.35 wandboard multi_v7_defconfig : FAILED 1:10.76
Successful boards:
apc vt8500_v6_v7_defconfig : passed 1:12.64 bbb omap2plus_defconfig : passed 1:32.25 bbb multi_v7_defconfig : passed 1:19.02 capri bcm_defconfig : passed 0:41.67 sama5 sama5_defconfig : passed 1:56.07
Board legend is available at http://arm-soc.lixom.net/boards.html
Last entries of failed logs below:
========================================================================
Board arndale-exynos_defconfig failure log: -------------------------------------------------
Load address: 0x40800000 Loading: *################################################################# ################################################################# ########################################################## done Bytes transferred = 2756288 (2a0ec0 hex) ARNDALE5250 # setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 ARNDALE5250 # tftp 0x407c0000 mainline/v3.13-9044-gd30492a/exynos_defconfig/dtbs/exynos5250-arndale.dtb tftp 0x407c0000 mainline/v3.13-9044-gd30492a/exynos_defconfig/dtbs/exynos5250-arndale.dtb Waiting for Ethernet connection... done. Using asx0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.176 Filename 'mainline/v3.13-9044-gd30492a/exynos_defconfig/dtbs/exynos5250-arndale.dtb'. Load address: 0x407c0000 Loading: *### done Bytes transferred = 33440 (82a0 hex) ARNDALE5250 # printenv bootargs printenv bootargs bootargs=console=ttySAC2,115200n8 earlyprintk debug root=/dev/mmcblk0p1 rootwait rw ARNDALE5250 # bootm 0x40800000 - 0x407c0000 bootm 0x40800000 - 0x407c0000 ## Booting kernel from Legacy Image at 40800000 ... Image Name: Linux Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 2756224 Bytes = 2.6 MiB Load Address: 40008000 Entry Point: 40008000 Verifying Checksum ... OK ## Flattened Device Tree blob at 407c0000 Booting using the fdt blob at 0x407c0000 Loading Kernel Image ... OK OK Loading Device Tree to 4fff4000, end 4ffff29f ... OK
Starting kernel ...
~$off # PYBOOT: Exception: timeout
========================================================================
Board beaver-multi_v7_defconfig failure log: -------------------------------------------------
setenv serverip 172.16.1.3 Tegra30 (Beaver) # tftp 0x82000000 mainline/v3.13-9044-gd30492a/multi_v7_defconfig/zImage tftp 0x82000000 mainline/v3.13-9044-gd30492a/multi_v7_defconfig/zImage Using asx0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.111 Filename 'mainline/v3.13-9044-gd30492a/multi_v7_defconfig/zImage'. Load address: 0x82000000 Loading: *################################################################# ################################################################# ################################################################# ######################################################## 2.8 MiB/s done Bytes transferred = 3680904 (382a88 hex) Tegra30 (Beaver) # setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 Tegra30 (Beaver) # tftp 0x83000000 mainline/v3.13-9044-gd30492a/multi_v7_defconfig/dtbs/tegra30-beaver.dtb tftp 0x83000000 mainline/v3.13-9044-gd30492a/multi_v7_defconfig/dtbs/tegra30-beaver.dtb Using asx0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.111 Filename 'mainline/v3.13-9044-gd30492a/multi_v7_defconfig/dtbs/tegra30-beaver.dtb'. Load address: 0x83000000 Loading: *## 860.4 KiB/s done Bytes transferred = 23808 (5d00 hex) Tegra30 (Beaver) # printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 earlyprintk debug root=/dev/mmcblk0p1 rootwait Tegra30 (Beaver) # bootz 0x82000000 - 0x83000000 bootz 0x82000000 - 0x83000000 Kernel image @ 0x82000000 [ 0x000000 - 0x382a88 ] ## Flattened Device Tree blob at 83000000 Booting using the fdt blob at 0x83000000 Loading Device Tree to 8fff7000, end 8ffffcff ... OK
Starting kernel ...
~$off # PYBOOT: Exception: timeout
========================================================================
Board capri-multi_v7_defconfig failure log: -------------------------------------------------
(user:build) Load fastboot kernel GET_DESC ->STRING DESC sending 'kernel' (3594 KB)... ................................................................................ ................................OKAY [ 0.774s] writing 'kernel'...
downloading of 3680904 bytes finished Flashing Raw Image Writing to partition 'kernel' Writing 'kerOKAY [ 0.674s] finished. total time: 1.448s nel' DONE! GET_DESC ->STRING DESC sending 'device-tree' (2 KB)... OKAY [ 0.002s] writing 'device-tree'...
downloading of 2862 bytes finished Flashing Raw Image Writing to partition 'device-tree' Writing 'device-tree' DONE! OKAY [ 0.011s] finished. total time: 0.014s GET_DESC ->STRING DESC resuming boot... OKAY [ 0.001s] finished. total time: 0.001s
MMC read: dev # 0, block # 72320, count 16384 ... 16384 blocks read: OK
MMC read: dev # 0, block # 114688, count 32768 ... 32768 blocks read: OK ## Flattened Device Tree blob at 9e000000 Booting using the fdt blob at 0x9e000000 Using Device Tree in place at 9e000000, end 9e003b2d
Starting kernel ...
~$off # PYBOOT: Exception: timeout
========================================================================
Board cubie-multi_v7_defconfig failure log: -------------------------------------------------
sun4i#tftp 0x40008000 mainline/v3.13-9044-gd30492a/multi_v7_defconfig/zImage tftp 0x40008000 mainline/v3.13-9044-gd30492a/multi_v7_defconfig/zImage Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.154 Filename 'mainline/v3.13-9044-gd30492a/multi_v7_defconfig/zImage'. Load address: 0x40008000 Loading: *################################################################# ################################################################# ################################################################# ######################################################## 2.8 MiB/s done Bytes transferred = 3680904 (382a88 hex) sun4i#setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 sun4i#tftp 0x41000000 mainline/v3.13-9044-gd30492a/multi_v7_defconfig/dtbs/sun4i-a10-cubieboard.dtb tftp 0x41000000 mainline/v3.13-9044-gd30492a/multi_v7_defconfig/dtbs/sun4i-a10-cubieboard.dtb Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.154 Filename 'mainline/v3.13-9044-gd30492a/multi_v7_defconfig/dtbs/sun4i-a10-cubieboard.dtb'. Load address: 0x41000000 Loading: *# 365.2 KiB/s done Bytes transferred = 10869 (2a75 hex) sun4i#printenv bootargs node: cubie status: on printenv bootargs bootargs=console=ttyS0,115200n8 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/cubie ip=dhcp sun4i#bootz 0x40008000 - 0x41000000 bootz 0x40008000 - 0x41000000 Kernel image @ 0x40008000 [ 0x000000 - 0x382a88 ] ## Flattened Device Tree blob at 41000000 Booting using the fdt blob at 0x41000000 Loading Device Tree to 40ffa000, end 40fffa74 ... OK
Starting kernel ...
~$off # PYBOOT: Exception: timeout
========================================================================
Board cubie-sunxi_defconfig failure log: -------------------------------------------------
DHCP client bound to address 172.16.1.154 sun4i#setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 sun4i#tftp 0x40008000 mainline/v3.13-9044-gd30492a/sunxi_defconfig/zImage tftp 0x40008000 mainline/v3.13-9044-gd30492a/sunxi_defconfig/zImage Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.154 Filename 'mainline/v3.13-9044-gd30492a/sunxi_defconfig/zImage'. Load address: 0x40008000 Loading: *################################################################# ######################################################## 2.6 MiB/s done Bytes transferred = 1767720 (1af928 hex) sun4i#setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 sun4i#tftp 0x41000000 mainline/v3.13-9044-gd30492a/sunxi_defconfig/dtbs/sun4i-a10-cubieboard.dtb tftp 0x41000000 mainline/v3.13-9044-gd30492a/sunxi_defconfig/dtbs/sun4i-a10-cubieboard.dtb Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.154 Filename 'mainline/v3.13-9044-gd30492a/sunxi_defconfig/dtbs/sun4i-a10-cubieboard.dtb'. Load address: 0x41000000 Loading: *# 2.1 MiB/s done Bytes transferred = 10869 (2a75 hex) sun4i#printenv bootargs printenv bootargs bootargs=console=ttyS0,115200n8 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/cubie ip=dhcp sun4i#bootz 0x40008000 - 0x41000000 bootz 0x40008000 - 0x41000000 Kernel image @ 0x40008000 [ 0x000000 - 0x1af928 ] ## Flattened Device Tree blob at 41000000 Booting using the fdt blob at 0x41000000 Loading Device Tree to 40ffa000, end 40fffa74 ... OK
Starting kernel ...
~$off # PYBOOT: Exception: timeout
========================================================================
Board cubie2-multi_lpae_defconfig failure log: -------------------------------------------------
sun7i# tftp 0x40008000 mainline/v3.13-9044-gd30492a/multi_lpae_defconfig/zImage node: cubie2 status: on tftp 0x40008000 mainline/v3.13-9044-gd30492a/multi_lpae_defconfig/zImage Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.171 Filename 'mainline/v3.13-9044-gd30492a/multi_lpae_defconfig/zImage'. Load address: 0x40008000 Loading: *################################################################# ################################################################# ################################################################# ########################################################## 2.8 MiB/s done Bytes transferred = 3700688 (3877d0 hex) sun7i# setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 sun7i# tftp 0x41000000 mainline/v3.13-9044-gd30492a/multi_lpae_defconfig/dtbs/sun7i-a20-cubieboard2.dtb tftp 0x41000000 mainline/v3.13-9044-gd30492a/multi_lpae_defconfig/dtbs/sun7i-a20-cubieboard2.dtb Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.171 Filename 'mainline/v3.13-9044-gd30492a/multi_lpae_defconfig/dtbs/sun7i-a20-cubieboard2.dtb'. Load address: 0x41000000 Loading: *# 441.4 KiB/s done Bytes transferred = 12220 (2fbc hex) sun7i# printenv bootargs printenv bootargs bootargs=console=ttyS0,115200n8 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/cubie2 ip=dhcp sun7i# bootz 0x40008000 - 0x41000000 bootz 0x40008000 - 0x41000000 Kernel image @ 0x40008000 [ 0x000000 - 0x3877d0 ] ## Flattened Device Tree blob at 41000000 Booting using the fdt blob at 0x41000000 Loading Device Tree to 40ff9000, end 40ffefbb ... OK
Starting kernel ...
~$off # PYBOOT: Exception: timeout
========================================================================
Board cubie2-multi_v7_defconfig failure log: -------------------------------------------------
sun7i# tftp 0x40008000 mainline/v3.13-9044-gd30492a/multi_v7_defconfig/zImage tftp 0x40008000 mainline/v3.13-9044-gd30492a/multi_v7_defconfig/zImage Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.171 Filename 'mainline/v3.13-9044-gd30492a/multi_v7_defconfig/zImage'. Load address: 0x40008000 Loading: *################################################################# ################################################################# ################################################################# ######################################################## 4.1 MiB/s done Bytes transferred = 3680904 (382a88 hex) sun7i#setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 sun7i# tftp 0x41000000 mainline/v3.13-9044-gd30492a/multi_v7_defconfig/dtbs/sun7i-a20-cubieboard2.dtb tftp 0x41000000 mainline/v3.13-9044-gd30492a/multi_v7_defconfig/dtbs/sun7i-a20-cubieboard2.dtb Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.171 Filename 'mainline/v3.13-9044-gd30492a/multi_v7_defconfig/dtbs/sun7i-a20-cubieboard2.dtb'. Load address: 0x41000000 Loading: *# 518.6 KiB/s done Bytes transferred = 12220 (2fbc hex) sun7i# printenv bootargs printenv bootargs bootargs=console=ttyS0,115200n8 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/cubie2 ip=dhcp sun7i# bootz 0x40008000 - 0x41000000 bootz 0x40008000 - 0x41000000 Kernel image @ 0x40008000 [ 0x000000 - 0x382a88 ] ## Flattened Device Tree blob at 41000000 Booting using the fdt blob at 0x41000000 Loading Device Tree to 40ff9000, end 40ffefbb ... OK
Starting kernel ...
node: cubie2 status: on ~$off # PYBOOT: Exception: timeout
========================================================================
Board cubie2-sunxi_defconfig failure log: -------------------------------------------------
sun7i# setenv serverip 172.16.1.3 setenv serverip 172.16.1node: cubie2 status: on .3 sun7i# tftp 0x40008000 mainline/v3.13-9044-gd30492a/sunxi_defconfig/zImage tftp 0x40008000 mainline/v3.13-9044-gd30492a/sunxi_defconfig/zImage Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.171 Filename 'mainline/v3.13-9044-gd30492a/sunxi_defconfig/zImage'. Load address: 0x40008000 Loading: *################################################################# ######################################################## 4 MiB/s done Bytes transferred = 1767720 (1af928 hex) sun7i# setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 sun7i# tftp 0x41000000 mainline/v3.13-9044-gd30492a/sunxi_defconfig/dtbs/sun7i-a20-cubieboard2.dtb tftp 0x41000000 mainline/v3.13-9044-gd30492a/sunxi_defconfig/dtbs/sun7i-a20-cubieboard2.dtb Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.171 Filename 'mainline/v3.13-9044-gd30492a/sunxi_defconfig/dtbs/sun7i-a20-cubieboard2.dtb'. Load address: 0x41000000 Loading: *# 441.4 KiB/s done Bytes transferred = 12220 (2fbc hex) sun7i# printenv bootargs printenv bootargs bootargs=console=ttyS0,115200n8 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/cubie2 ip=dhcp sun7i# bootz 0x40008000 - 0x41000000 bootz 0x40008000 - 0x41000000 Kernel image @ 0x40008000 [ 0x000000 - 0x1af928 ] ## Flattened Device Tree blob at 41000000 Booting using the fdt blob at 0x41000000 Loading Device Tree to 40ff9000, end 40ffefbb ... OK
Starting kernel ...
~$off # PYBOOT: Exception: timeout
========================================================================
Board cubox-dove_defconfig failure log: -------------------------------------------------
CuBox>> dhcp dhcp Unknown command 'dhcp' - try 'help' CuBox>> setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 CuBox>> tftp 0x02000000 tmp/cubox-osf53C/tmp8cWbId-uImage tftp 0x02000000 tmp/cubox-osf53C/tmp8cWbId-uImage Using egiga0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.183 Filename 'tmp/cubox-osf53C/tmp8cWbId-uImage'. Load address: 0x2000000 Loading: *################################################################# ################################################################# ############################################################## done Bytes transferred = 2805463 (2aced7 hex) CuBox>> setenv bootargs console=ttyS0,115200 root=/dev/mmcblk0p2 rw rootwait debug earlyprintk setenv bootargs console=ttyS0,115200 root=/dev/mmcblk0p2 rw rootwait debug earlyprintk CuBox>> printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 root=/dev/mmcblk0p2 rw rootwait debug earlyprintk CuBox>> bootm 0x02000000 bootm 0x02000000 ## Booting kernel from Legacy Image at 02000000 ... Image Name: Linux Created: 2014-01-29 3:09:46 UTC Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 2805399 Bytes = 2.7 MB Load Address: 00008000 Entry Point: 00008000 Verifying Checksum ... OK Loading Kernel Image ... node: cubox status: on OK OK
Starting kernel ...
Uncompressing Linux... done, booting the kernel. ~$off # PYBOOT: Exception: timeout
========================================================================
Board dalmore-multi_lpae_defconfig failure log: -------------------------------------------------
setenv serverip 172.16.1.3 Tegra114 (Dalmore) # tftp 0x82000000 mainline/v3.13-9044-gd30492a/multi_lpae_defconfig/zImage tftp 0x82000000 mainline/v3.13-9044-gd30492a/multi_lpae_defconfig/zImage Using asx0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.143 Filename 'mainline/v3.13-9044-gd30492a/multi_lpae_defconfig/zImage'. Load address: 0x82000000 Loading: *################################################################# ################################################################# ################################################################# ########################################################## 2.8 MiB/s done Bytes transferred = 3700688 (3877d0 hex) Tegra114 (Dalmore) # setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 Tegra114 (Dalmore) # tftp 0x83000000 mainline/v3.13-9044-gd30492a/multi_lpae_defconfig/dtbs/tegra114-dalmore.dtb tftp 0x83000000 mainline/v3.13-9044-gd30492a/multi_lpae_defconfig/dtbs/tegra114-dalmore.dtb Using asx0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.143 Filename 'mainline/v3.13-9044-gd30492a/multi_lpae_defconfig/dtbs/tegra114-dalmore.dtb'. Load address: 0x83000000 Loading: *### 737.3 KiB/s done Bytes transferred = 34015 (84df hex) Tegra114 (Dalmore) # printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 root=/dev/mmcblk0p1 rootwait debug earlyprintk Tegra114 (Dalmore) # bootz 0x82000000 - 0x83000000 bootz 0x82000000 - 0x83000000 Kernel image @ 0x82000000 [ 0x000000 - 0x3877d0 ] ## Flattened Device Tree blob at 83000000 Booting using the fdt blob at 0x83000000 Loading Device Tree to 8fff4000, end 8ffff4de ... OK
Starting kernel ...
~$off # PYBOOT: Exception: timeout
========================================================================
Board dalmore-multi_v7_defconfig failure log: -------------------------------------------------
setenv serverip 172.16.1.3 Tegra114 (Dalmore) # tftp 0x82000000 mainline/v3.13-9044-gd30492a/multi_v7_defconfig/zImage tftp 0x82000000 mainline/v3.13-9044-gd30492a/multi_v7_defconfig/zImage Using asx0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.143 Filename 'mainline/v3.13-9044-gd30492a/multi_v7_defconfig/zImage'. Load address: 0x82000000 Loading: *################################################################# ################################################################# ################################################################# ######################################################## 2.8 MiB/s done Bytes transferred = 3680904 (382a88 hex) Tegra114 (Dalmore) # setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 Tegra114 (Dalmore) # tftp 0x83000000 mainline/v3.13-9044-gd30492a/multi_v7_defconfig/dtbs/tegra114-dalmore.dtb tftp 0x83000000 mainline/v3.13-9044-gd30492a/multi_v7_defconfig/dtbs/tegra114-dalmore.dtb Using asx0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.143 Filename 'mainline/v3.13-9044-gd30492a/multi_v7_defconfig/dtbs/tegra114-dalmore.dtb'. Load address: 0x83000000 Loading: *### 664.1 KiB/s done Bytes transferred = 34015 (84df hex) Tegra114 (Dalmore) # printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 root=/dev/mmcblk0p1 rootwait debug earlyprintk Tegra114 (Dalmore) # bootz 0x82000000 - 0x83000000 bootz 0x82000000 - 0x83000000 Kernel image @ 0x82000000 [ 0x000000 - 0x382a88 ] ## Flattened Device Tree blob at 83000000 Booting using the fdt blob at 0x83000000 Loading Device Tree to 8fff4000, end 8ffff4de ... OK
Starting kernel ...
~$off # PYBOOT: Exception: timeout
========================================================================
Board panda-multi_v7_defconfig failure log: -------------------------------------------------
Loading: *################################################################# ################################################################# ################################################################# ######################################################## done Bytes transferred = 3680968 (382ac8 hex) Panda # setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 Panda # tftp 0x81f00000 mainline/v3.13-9044-gd30492a/multi_v7_defconfig/dtbs/omap4-panda-es.dtb tftp 0x81f00000 mainline/v3.13-9044-gd30492a/multi_v7_defconfig/dtbs/omap4-panda-es.dtb Waiting for Ethernet connection... done. Using sms0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.182 Filename 'mainline/v3.13-9044-gd30492a/multi_v7_defconfig/dtbs/omap4-panda-es.dtb'. Load address: 0x81f00000 Loading: *#### done Bytes transferred = 50489 (c539 hex) Panda # printenv bootargs printenv bootargs bootargs=console=ttyO2,115200 root=/dev/mmcblk0p2 rootwait debug earlyprintk Panda # bootm 0x82000000 - 0x81f00000 bootm 0x82000000 - 0x81f00000 ## Booting kernel from Legacy Image at 82000000 ... Image Name: Linux Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 3680904 Bytes = 3.5 MiB Load Address: 80008000 Entry Point: 80008000 Verifying Checksum ... OK ## Flattened Device Tree blob at 81f00000 Booting using the fdt blob at 0x81f00000 Loading Kernel Image ... OK OK Using Device Tree in place at 81f00000, end 81f0f538
Starting kernel ...
~$off # PYBOOT: Exception: timeout
========================================================================
Board panda-omap2plus_defconfig failure log: -------------------------------------------------
################################################################# ################################################################# ################################################################# ################################ done Bytes transferred = 4275088 (413b90 hex) Panda # setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 Panda # tftp 0x81f00000 mainline/v3.13-9044-gd30492a/omap2plus_defconfig/dtbs/omap4-panda-es.dtb tftp 0x81f00000 mainline/v3.13-9044-gd30492a/omap2plus_defconfig/dtbs/omap4-panda-es.dtb Waiting for Ethernet connection... done. Using sms0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.182 Filename 'mainline/v3.13-9044-gd30492a/omap2plus_defconfig/dtbs/omap4-panda-es.dtb'. Load address: 0x81f00000 Loading: *#### done Bytes transferred = 50489 (c539 hex) Panda #printenv bootargs printenv bootargs bootargs=console=ttyO2,115200 root=/dev/mmcblk0p2 rootwait debug earlyprintk Panda # bootm 0x82000000 - 0x81f00000 bootm 0x82000000 - 0x81f00000 ## Booting kernel from Legacy Image at 82000000 ... Image Name: Linux Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 4275024 Bytes = 4.1 MiB Load Address: 80008000 Entry Point: 80008000 Verifying Checksum ... OK ## Flattened Device Tree blob at 81f00000 Booting using the fdt blob at 0x81f00000 Loading Kernel Image ... OK OK Using Device Tree in place at 81f00000, end 81f0f538
Starting kernel ...
~$off # PYBOOT: Exception: timeout
========================================================================
Board snow-exynos_defconfig failure log: -------------------------------------------------
OK Loading Device Tree to 5fff0000, end 5ffff7f8 ... OK
Starting kernel ...
Timer summary in microseconds: Mark Elapsed Stage 0 0 reset 100,000 100,000 spl_start 1,699,347 1,599,347 board_init_f 1,749,137 49,790 board_init_r 1,751,338 2,201 board_init 1,881,182 129,844 board_init_done 1,961,004 79,822 id=64 1,966,426 5,422 main_loop 3,890,415 1,923,989 usb_start 8,569,774 4,679,359 tftp_start 8,569,792 18 id=80 8,569,794 2 eth_start 12,357,120 3,787,326 id=81 12,357,204 84 id=82 12,357,209 5 id=84 12,357,211 2 tftp_done 19,703,739 7,346,528 bootm_start 19,703,747 8 id=1 19,783,705 79,958 id=2 19,783,724 19 id=3 20,565,222 781,498 id=4 20,565,223 1 id=5 20,565,235 12 id=6 21,287,791 722,556 id=7 21,287,794 3 id=8 21,287,808 14 id=15 21,856,261 568,453 start_kernel
Accumulated time: 142,578 lcd Stashed 27 records ~$off # PYBOOT: Exception: timeout
========================================================================
Board snowball-multi_v7_defconfig failure log: -------------------------------------------------
smc911x: MAC 08:00:08:1e:0f:44 BOOTP broadcast 1 *** Unhandled DHCP Option in OFFER/ACK: 28 *** Unhandled DHCP Option in OFFER/ACK: 28 DHCP client bound to address 172.16.1.138 U8500 $ setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 U8500 $ tftp 0x00100000 tmp/snowball-522sRC/tmpRjnk6_-uImage tftp 0x00100000 tmp/snowball-522sRC/tmpRjnk6_-uImage smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC 08:00:08:1e:0f:44 Using smc911x-0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.138 Filename 'tmp/snowball-522sRC/tmpRjnk6_-uImage'. Load address: 0x100000 Loading: *################################################################# ################################################################# ################################################################# ########################################################### done Bytes transferred = 3716481 (38b581 hex) U8500 $ printenv bootargs printenv bootargs bootargs=console=ttyAMA2,115200 root=/dev/mmcblk0p4 rootwait rw debug earlyprintk U8500 $ bootm 0x00100000 bootm 0x00100000 ## Booting kernel from Legacy Image at 00100000 ... Image Name: Linux Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 3716417 Bytes = 3.5 MB Load Address: 00008000 Entry Point: 00008000 Loading Kernel Image ... OK OK
Starting kernel ...
~$off # PYBOOT: Exception: timeout
========================================================================
Board snowball-u8500_defconfig failure log: -------------------------------------------------
BOOTP broadcast 1 *** Unhandled DHCP Option in OFFER/ACK: 28 *** Unhandled DHCP Option in OFFER/ACK: 28 DHCP client bound to address 172.16.1.138 U8500 $ setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 U8500 $ tftp 0x00100000 tmp/snowball-9c9TlJ/tmpIFMocr-uImage tftp 0x00100000 tmp/snowball-9c9TlJ/tmpIFMocr-uImage smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC 08:00:08:1e:0f:44 Using smc911x-0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.138 Filename 'tmp/snowball-9c9TlJ/tmpIFMocr-uImage'. Load address: 0x100000 Loading: *################################################################# ################################################################# ################################################################# ##### done Bytes transferred = 2934601 (2cc749 hex) U8500 $ printenv bootargs printenv bootargs bootargs=console=ttyAMA2,115200 root=/dev/mmcblk0p4 rootwait rw debug earlyprintk U8500 $ bootm 0x00100000 bootm 0x00100000 ## Booting kernel from Legacy Image at 00100000 ... Image Name: Linux Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 2934537 Bytes = 2.8 MB Load Address: 00008000 Entry Point: 00008000 Loading Kernel Image ... OK OK
Starting kernel ...
node: snowball status: on ~$off # PYBOOT: Exception: timeout
========================================================================
Board trimslice-multi_v7_defconfig failure log: -------------------------------------------------
setenv serverip 172.16.1.3 Tegra20 (TrimSlice) # tftp 0x800000 mainline/v3.13-9044-gd30492a/multi_v7_defconfig/zImage tftp 0x800000 mainline/v3.13-9044-gd30492a/multi_v7_defconfig/zImage Using asx0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.129 Filename 'mainline/v3.13-9044-gd30492a/multi_v7_defconfig/zImage'. Load address: 0x800000 Loading: *################################################################# ################################################################# ################################################################# ######################################################## 2.8 MiB/s done Bytes transferred = 3680904 (382a88 hex) Tegra20 (TrimSlice) # setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 Tegra20 (TrimSlice) # tftp 0x1800000 mainline/v3.13-9044-gd30492a/multi_v7_defconfig/dtbs/tegra20-trimslice.dtb tftp 0x1800000 mainline/v3.13-9044-gd30492a/multi_v7_defconfig/dtbs/tegra20-trimslice.dtb Using asx0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.129 Filename 'mainline/v3.13-9044-gd30492a/multi_v7_defconfig/dtbs/tegra20-trimslice.dtb'. Load address: 0x1800000 Loading: *## 598.6 KiB/s done Bytes transferred = 20236 (4f0c hex) Tegra20 (TrimSlice) # printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 root=/dev/sda1 rootwait rw Tegra20 (TrimSlice) # bootz 0x800000 - 0x1800000 bootz 0x800000 - 0x1800000 Kernel image @ 0x800000 [ 0x000000 - 0x382a88 ] ## Flattened Device Tree blob at 01800000 Booting using the fdt blob at 0x1800000 Loading Device Tree to 0fff8000, end 0fffff0b ... OK
Starting kernel ...
~$off # PYBOOT: Exception: timeout
========================================================================
Board wandboard-imx_v6_v7_defconfig failure log: -------------------------------------------------
tftp 0x10800000 mainline/v3.13-9044-gd30492a/imx_v6_v7_defconfig/zImage Using FEC device TFTP from server 172.16.1.3; our IP address is 172.16.1.172 Filename 'mainline/v3.13-9044-gd30492a/imx_v6_v7_defconfig/zImage'. Load address: 0x10800000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################ 5.7 MiB/s done Bytes transferred = 4999760 (4c4a50 hex) => setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 => tftp 0x11000000 mainline/v3.13-9044-gd30492a/imx_v6_v7_defconfig/dtbs/imx6q-wandboard.dtb tftp 0x11000000 mainline/v3.13-9044-gd30492a/imx_v6_v7_defconfig/dtbs/imx6q-wandboard.dtb Using FEC device TFTP from server 172.16.1.3; our IP address is 172.16.1.172 Filename 'mainline/v3.13-9044-gd30492a/imx_v6_v7_defconfig/dtbs/imx6q-wandboard.dtb'. Load address: 0x11000000 Loading: *### 729.5 KiB/s done Bytes transferred = 34380 (864c hex) => printenv bootargs printenv bootargs bootargs=console=ttymxc0,115200 root=/dev/mmcblk0p2 rootwait debug => bootz 0x10800000 - 0x11000000 bootz 0x10800000 - 0x11000000 Kernel image @ 0x10800000 [ 0x000000 - 0x4c4a50 ] ## Flattened Device Tree blob at 11000000 Booting using the fdt blob at 0x11000000 Using Device Tree in place at 11000000, end 1100b64b
Starting kernel ...
~$off # PYBOOT: Exception: timeout
========================================================================
Board wandboard-multi_v7_defconfig failure log: -------------------------------------------------
=> tftp 0x10800000 mainline/v3.13-9044-gd30492a/multi_v7_defconfig/zImage tftp 0x10800000 mainline/v3.13-9044-gd30492a/multi_v7_defconfig/zImage Using FEC device TFTP from server 172.16.1.3; our IP address is 172.16.1.172 Filename 'mainline/v3.13-9044-gd30492a/multi_v7_defconfig/zImage'. Load address: 0x10800000 Loading: *################################################################# ################################################################# ################################################################# ######################################################## 6.1 MiB/s done Bytes transferred = 3680904 (382a88 hex) => setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 =>tftp 0x11000000 mainline/v3.13-9044-gd30492a/multi_v7_defconfig/dtbs/imx6q-wandboard.dtb tftp 0x11000000 mainline/v3.13-9044-gd30492a/multi_v7_defconfig/dtbs/imx6q-wandboard.dtb Using FEC device TFTP from server 172.16.1.3; our IP address is 172.16.1.172 Filename 'mainline/v3.13-9044-gd30492a/multi_v7_defconfig/dtbs/imx6q-wandboard.dtb'. Load address: 0x11000000 Loading: *### 559.6 KiB/s done Bytes transferred = 34380 (864c hex) =>printenv bootargs printenv boonode: wandboard status: on targs bootargs=console=ttymxc0,115200 root=/dev/mmcblk0p2 rootwait debug => bootz 0x10800000 - 0x11000000 bootz 0x10800000 - 0x11000000 Kernel image @ 0x10800000 [ 0x000000 - 0x382a88 ] ## Flattened Device Tree blob at 11000000 Booting using the fdt blob at 0x11000000 Using Device Tree in place at 11000000, end 1100b64b
Starting kernel ...
~$off # PYBOOT: Exception: timeout