Full logs are available at http://arm-soc.lixom.net/bootlogs/mainline/v4.6/
Failed boards:
arndale multi_v7_nosmp_defconfig : NO BUILD bbb multi_v7_nosmp_defconfig : NO BUILD beagleboard-x15 arm-omap2plus_defconfig : FAILED 1:48.14 beagleboard-x15 arm-multi_v7_defconfig : FAILED 1:51.99 beagleboard-x15 arm-multi_lpae_defconfig : FAILED 1:48.55 beagleboard-x15 multi_v7_nosmp_defconfig : NO BUILD beaver multi_v7_nosmp_defconfig : NO BUILD capri multi_v7_nosmp_defconfig : NO BUILD chitra powerpc-pasemi_defconfig : BUILD FAILED colibri-vf61 multi_v7_nosmp_defconfig : NO BUILD colombus multi_v7_nosmp_defconfig : NO BUILD cosmic multi_v7_nosmp_defconfig : NO BUILD cubie multi_v7_nosmp_defconfig : NO BUILD cubie2 multi_v7_nosmp_defconfig : NO BUILD cubox multi_v7_nosmp_defconfig : NO BUILD dalmore multi_v7_nosmp_defconfig : NO BUILD hummingboard multi_v7_nosmp_defconfig : NO BUILD jetsontk1 multi_v7_nosmp_defconfig : NO BUILD minnowmax minnowmax_defconfig : NO BUILD odroidu3 arm-exynos_defconfig : FAILED 2:14.72 omap5uevm arm-multi_v7_defconfig : FAILED 2:05.72 omap5uevm arm-multi_lpae_defconfig : FAILED 2:31.47 omap5uevm multi_v7_nosmp_defconfig : NO BUILD pandaes multi_v7_nosmp_defconfig : NO BUILD parallella multi_v7_nosmp_defconfig : NO BUILD pi arm-multi_v7_defconfig : FAILED 1:55.08 pi arm-multi_lpae_defconfig : FAILED 1:56.08 pi multi_v7_nosmp_defconfig : NO BUILD pit multi_v7_nosmp_defconfig : NO BUILD rk3288evb multi_v7_nosmp_defconfig : NO BUILD seaboard multi_v7_nosmp_defconfig : NO BUILD snow multi_v7_nosmp_defconfig : NO BUILD snowball multi_v7_nosmp_defconfig : NO BUILD socfpga multi_v7_nosmp_defconfig : NO BUILD trimslice multi_v7_nosmp_defconfig : NO BUILD wandboard multi_v7_nosmp_defconfig : NO BUILD
Successful boards:
apc arm-vt8500_v6_v7_defconfig : passed 1:18.90 arndale arm-exynos_defconfig : passed 1:27.88 arndale arm-multi_v7_defconfig : passed 1:29.81 arndale arm-multi_lpae_defconfig : passed 1:22.06 bbb arm-omap2plus_defconfig : passed 1:43.69 bbb arm-multi_v7_defconfig : passed 1:23.15 capri arm-bcm_defconfig : passed 1:09.71 capri arm-multi_v7_defconfig : passed 0:55.63 chitra powerpc-ppc64_defconfig : passed 2:20.66 colombus arm-sunxi_defconfig : passed 2:37.82 colombus arm-multi_v7_defconfig : passed 2:37.15 colombus arm-multi_lpae_defconfig : passed 2:34.37 cosmic arm-imx_v6_v7_defconfig : passed 3:22.87 cosmic arm-multi_v7_defconfig : passed 3:14.90 cubie arm-sunxi_defconfig : passed 0:49.73 cubie arm-multi_v7_defconfig : passed 0:51.00 cubie2 arm-sunxi_defconfig : passed 0:48.67 cubie2 arm-multi_v7_defconfig : passed 0:50.76 cubie2 arm-multi_lpae_defconfig : passed 0:56.92 cubox arm-multi_v7_defconfig : passed 1:06.98 cubox arm-mvebu_v7_defconfig : passed 1:19.80 dalmore arm-tegra_defconfig : passed 1:24.72 dalmore arm-multi_v7_defconfig : passed 1:23.51 dalmore arm-multi_lpae_defconfig : passed 1:36.22 hummingboard arm-imx_v6_v7_defconfig : passed 1:52.21 hummingboard arm-multi_v7_defconfig : passed 1:16.22 jetsontk1 arm-tegra_defconfig : passed 1:34.44 jetsontk1 arm-multi_v7_defconfig : passed 1:33.44 omap5uevm arm-omap2plus_defconfig : passed 1:04.05 pandaes arm-omap2plus_defconfig : warnings 1:37.79 pandaes arm-multi_v7_defconfig : passed 1:53.27 pi arm-exynos_defconfig : passed 2:18.72 pit arm-exynos_defconfig : passed 2:12.77 pit arm-multi_v7_defconfig : passed 2:13.97 pit arm-multi_lpae_defconfig : passed 2:21.83 seaboard arm-tegra_defconfig : passed 0:59.52 seaboard arm-multi_v7_defconfig : passed 1:12.47 seattle arm64-defconfig : warnings 2:33.30 snow arm-exynos_defconfig : passed 2:22.85 snow arm-multi_v7_defconfig : passed 2:00.98 snow arm-multi_lpae_defconfig : passed 2:00.85 snowball arm-u8500_defconfig : passed 1:23.22 snowball arm-multi_v7_defconfig : passed 3:09.05 trimslice arm-tegra_defconfig : passed 2:45.20 trimslice arm-multi_v7_defconfig : passed 1:37.82 wandboard arm-imx_v6_v7_defconfig : passed 1:15.55 wandboard arm-multi_v7_defconfig : passed 1:20.98
Offline boards:
beaver arm-tegra_defconfig : OFFLINE 2:13.15 beaver arm-multi_v7_defconfig : OFFLINE 2:32.12 colibri-vf61 arm-imx_v6_v7_defconfig : OFFLINE 2:14.66 colibri-vf61 arm-multi_v7_defconfig : OFFLINE 2:23.30 jetsontk1 arm-multi_lpae_defconfig : OFFLINE 2:18.17 parallella arm-multi_v7_defconfig : OFFLINE 2:49.64 rk3288evb arm-multi_v7_defconfig : OFFLINE 0:53.33 rk3288evb arm-multi_lpae_defconfig : OFFLINE 0:45.46 sama5 arm-sama5_defconfig : OFFLINE 2:21.89 sama5d3-xplained arm-sama5_defconfig : OFFLINE 2:19.36 socfpga arm-socfpga_defconfig : OFFLINE 2:39.73 socfpga arm-multi_v7_defconfig : OFFLINE 2:16.44
Board legend is available at http://arm-soc.lixom.net/boards.html
Last entries of failed logs below:
========================================================================
Board beagleboard-x15-arm-multi_lpae_defconfig failure log: -------------------------------------------------
[ 1.717557] at24 0-0050: 4096 byte 24c32 EEPROM, writable, 1 bytes/write [ 1.724634] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 1.750727] rtc-ds1307 2-006f: SET TIME! [ 1.756461] rtc-ds1307 2-006f: rtc core: registered mcp7941x as rtc0 [ 1.763214] rtc-ds1307 2-006f: 64 bytes nvram [ 1.767828] omap_i2c 48060000.i2c: bus 2 rev0.12 at 400 kHz [ 1.776018] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 1.781793] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 [ 1.790037] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x00010010 [ 1.799201] xhci-hcd xhci-hcd.0.auto: irq 400, io mem 0x48890000 [ 1.806072] hub 1-0:1.0: USB hub found [ 1.810024] hub 1-0:1.0: 1 port detected [ 1.814430] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 1.820215] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 [ 1.828318] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.837335] hub 2-0:1.0: USB hub found [ 1.841303] hub 2-0:1.0: 1 port detected [ 1.847334] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 1.881333] vdd_3v3: supplied by regen1 [ 1.920756] rtc-ds1307 2-006f: setting system clock to 2001-01-01 00:00:00 UTC (978307200) [ 1.938406] aic_dvdd_fixed: disabling [ 1.943151] Waiting for root device /dev/mmcblk0p1... [ 1.987279] mmc1: new high speed MMC card at address 0001 [ 1.993268] mmcblk1: mmc1:0001 S10004 3.56 GiB [ 1.998161] mmcblk1boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 2.004499] mmcblk1boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 2.011364] mmcblk1: p1 [ 2.120230] usb 1-1: new high-speed USB device number 2 using xhci-hcd [ 2.155291] usb 2-1: new SuperSpeed USB device number 2 using xhci-hcd [ 2.180437] hub 2-1:1.0: USB hub found [ 2.184410] hub 2-1:1.0: 4 ports detected [ 2.276455] hub 1-1:1.0: USB hub found [ 2.280443] hub 1-1:1.0: 4 ports detected
[PYBOOT] [beagleboard-x15 01:45]: Timed out waiting for "<type 'str'>":
[PYBOOT] [beagleboard-x15 01:46]: got exception: timeout ~$off
[PYBOOT] [beagleboard-x15 01:48]: Done.
========================================================================
Board beagleboard-x15-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.717439] at24 0-0050: 4096 byte 24c32 EEPROM, writable, 1 bytes/write [ 1.724520] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 1.750688] rtc-ds1307 2-006f: SET TIME! [ 1.756447] rtc-ds1307 2-006f: rtc core: registered mcp7941x as rtc0 [ 1.763203] rtc-ds1307 2-006f: 64 bytes nvram [ 1.767818] omap_i2c 48060000.i2c: bus 2 rev0.12 at 400 kHz [ 1.776009] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 1.781790] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 [ 1.790045] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x00010010 [ 1.799217] xhci-hcd xhci-hcd.0.auto: irq 400, io mem 0x48890000 [ 1.806102] hub 1-0:1.0: USB hub found [ 1.810060] hub 1-0:1.0: 1 port detected [ 1.814466] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 1.820244] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 [ 1.828367] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.837388] hub 2-0:1.0: USB hub found [ 1.841361] hub 2-0:1.0: 1 port detected [ 1.847383] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 1.881341] vdd_3v3: supplied by regen1 [ 1.919663] rtc-ds1307 2-006f: setting system clock to 2001-01-01 00:00:00 UTC (978307200) [ 1.936628] aic_dvdd_fixed: disabling [ 1.941227] Waiting for root device /dev/mmcblk0p1... [ 1.968300] mmc1: new high speed MMC card at address 0001 [ 1.974277] mmcblk1: mmc1:0001 S10004 3.56 GiB [ 1.979158] mmcblk1boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 1.985493] mmcblk1boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 1.992366] mmcblk1: p1 [ 2.120191] usb 1-1: new high-speed USB device number 2 using xhci-hcd [ 2.155217] usb 2-1: new SuperSpeed USB device number 2 using xhci-hcd [ 2.180475] hub 2-1:1.0: USB hub found [ 2.184454] hub 2-1:1.0: 4 ports detected [ 2.276496] hub 1-1:1.0: USB hub found [ 2.280479] hub 1-1:1.0: 4 ports detected
[PYBOOT] [beagleboard-x15 01:49]: Timed out waiting for "<type 'str'>":
[PYBOOT] [beagleboard-x15 01:50]: got exception: timeout ~$off
[PYBOOT] [beagleboard-x15 01:51]: Done.
========================================================================
Board beagleboard-x15-arm-omap2plus_defconfig failure log: -------------------------------------------------
[ 2.174120] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 2.180996] of_get_named_gpiod_flags: parsed 'cd-gpios' property of node '/ocp/mmc@4809c000[0]' - status (0) [ 2.191385] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 2.196255] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer wp [ 2.202554] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 2.209421] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@4809c000[0]' [ 2.219023] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@4809c000[0]' [ 2.228526] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 2.235583] omap_hsmmc 4809c000.mmc: lookup for GPIO wp failed [ 2.283783] omap_hsmmc 480b4000.mmc: GPIO lookup for consumer cd [ 2.290080] omap_hsmmc 480b4000.mmc: using device tree for GPIO lookup [ 2.296959] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/ocp/mmc@480b4000[0]' [ 2.306565] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/ocp/mmc@480b4000[0]' [ 2.316055] omap_hsmmc 480b4000.mmc: using lookup tables for GPIO lookup [ 2.323095] omap_hsmmc 480b4000.mmc: lookup for GPIO cd failed [ 2.329221] omap_hsmmc 480b4000.mmc: GPIO lookup for consumer wp [ 2.335539] omap_hsmmc 480b4000.mmc: using device tree for GPIO lookup [ 2.342391] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@480b4000[0]' [ 2.351990] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@480b4000[0]' [ 2.361494] omap_hsmmc 480b4000.mmc: using lookup tables for GPIO lookup [ 2.368542] omap_hsmmc 480b4000.mmc: lookup for GPIO wp failed [ 2.375236] vdd_3v3: supplied by regen1 [ 2.413863] hctosys: unable to open rtc device (rtc0) [ 2.419170] sr_init: No PMIC hook to init smartreflex [ 2.424691] sr_init: platform driver register failed for SR [ 2.472112] aic_dvdd_fixed: disabling [ 2.476376] ldousb: disabling [ 2.485523] Waiting for root device /dev/mmcblk0p1... [ 2.535419] mmc1: new high speed MMC card at address 0001 [ 2.543161] mmcblk1: mmc1:0001 S10004 3.56 GiB [ 2.548485] mmcblk1boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 2.555268] mmcblk1boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 2.563712] mmcblk1: p1
[PYBOOT] [beagleboard-x15 01:45]: Timed out waiting for "<type 'str'>":
[PYBOOT] [beagleboard-x15 01:46]: got exception: timeout ~$off
[PYBOOT] [beagleboard-x15 01:47]: Done.
========================================================================
Board odroidu3-arm-exynos_defconfig failure log: -------------------------------------------------
[ 1.718874] dwmmc_exynos 12550000.mmc: DW MMC controller at irq 107,32 bit host data width,128 deep fifo [ 1.728590] dwmmc_exynos 12550000.mmc: allocated mmc-pwrseq [ 1.732425] usb 1-3: new high-speed USB device number 2 using exynos-ehci [ 1.767453] dwmmc_exynos 12550000.mmc: 1 slots initialized [ 1.768646] usbcore: registered new interface driver usbhid [ 1.773870] usbhid: USB HID core driver [ 1.782528] NET: Registered protocol family 10 [ 1.783132] sit: IPv6 over IPv4 tunneling driver [ 1.786372] NET: Registered protocol family 17 [ 1.790391] NET: Registered protocol family 15 [ 1.794851] Key type dns_resolver registered [ 1.799168] Registering SWP/SWPB emulation handler [ 1.805026] s3c-rtc 10070000.rtc: rtc disabled, re-enabling [ 1.809578] s3c-rtc 10070000.rtc: rtc core: registered s3c as rtc1 [ 1.837983] max98090 1-0010: MAX98090 REVID=0x43 [ 1.840242] max98090 1-0010: use default 2.8v micbias [ 1.842927] mmc_host mmc1: Bus speed (slot 0) = 44000000Hz (slot req 52000000Hz, actual 44000000HZ div = 0) [ 1.852037] mmc_host mmc1: Bus speed (slot 0) = 73333333Hz (slot req 52000000Hz, actual 36666666HZ div = 1) [ 1.861776] mmc1: new DDR MMC card at address 0001 [ 1.864228] asoc-simple-card sound: HiFi <-> 3830000.i2s mapping ok [ 1.873102] mmcblk1: mmc1:0001 008G92 7.28 GiB [ 1.877881] input: gpio_keys as /devices/platform/gpio_keys/input/input0 [ 1.889176] mmcblk1boot0: mmc1:0001 008G92 partition 1 4.00 MiB [ 1.889752] mmcblk1boot1: mmc1:0001 008G92 partition 2 4.00 MiB [ 1.895699] mmcblk1rpmb: mmc1:0001 008G92 partition 3 512 KiB [ 1.902380] mmcblk1: p1 p2 [ 1.912969] max77686-rtc max77686-rtc: setting system clock to 2000-01-01 01:00:19 UTC (946688419) [ 1.935973] VDD10_HDMI_1.0V: disabling [ 1.936703] vdd_g3d: disabling [ 1.937782] BUCK8_2.8V: disabling [ 1.941p41] ALSA device list: [ 1.943398] #0: Odroid-U3 [ 1.947180] Waiting for root device /dev/mmcblk0p2...
[PYBOOT] [odroidu3 02:10]: Timed out waiting for "<type 'str'>":
[PYBOOT] [odroidu3 02:11]: got exception: timeout ~$off
[PYBOOT] [odroidu3 02:12]: Done.
========================================================================
Board omap5uevm-arm-multi_lpae_defconfig failure log: -------------------------------------------------
[ 1.869346] ThumbEE CPU extension supported. [ 1.873837] Registering SWP/SWPB emulation handler [ 1.880923] palmas 0-0048: Irq flag is 0x00000000 [ 1.904180] mmc0: new high speed MMC card at address 0001 [ 1.910171] mmcblk0: mmc0:0001 SEM04G 3.69 GiB [ 1.915153] mmcblk0boot0: mmc0:0001 SEM04G partition 1 2.00 MiB [ 1.921792] mmcblk0boot1: mmc0:0001 SEM04G partition 2 2.00 MiB [ 1.928321] smsc95xx v1.0.4 [ 1.933120] palmas 0-0048: Muxing GPIO 2, PWM 0, LED 0 [ 1.943851] palmas-rtc 48070000.i2c:palmas@48:rtc: rtc core: registered 48070000.i2c:palmas as rtc0 [ 1.983086] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 1.993247] smsc95xx 1-3:1.0 eth0: register 'smsc95xx' at usb-4a064c00.ehci-3, smsc95xx USB 2.0 Ethernet, 0e:05:e5:62:11:f5 [ 2.010249] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 2.051236] cpufreq: cpufreq_online: CPU0: Running at unlisted freq: 1100000 KHz [ 2.059166] cpufreq: cpufreq_online: CPU0: Unlisted initial frequency changed to: 1500000 KHz [ 2.068729] Unable to handle kernel NULL pointer dereference at virtual address 0000006c [ 2.077208] pgd = c0204000 [ 2.080046] [0000006c] *pgd=00000000 [ 2.083796] Internal error: Oops: 80000005 [#1] SMP ARM [ 2.089261] Modules linked in: [ 2.092460] CPU: 0 PID: 6 Comm: kworker/u4:0 Not tainted 4.6.0 #1 [ 2.098835] Hardware name: Generic OMAP5 (Flattened Device Tree) [ 2.105128] Workqueue: deferwq deferred_probe_work_func [ 2.110597] task: ee06da40 ti: ee086000 task.ti: ee086000 [ 2.116253] PC is at 0x6c [ 2.118994] LR is at pcs_get_group_name+0xc/0x50 [ 2.123829] pc : [<0000006c>] lr : [<c05d2070>] psr: 20000033 [ 2.123829] sp : ee087dd8 ip : ed809160 fp : 00000000 [ 2.135844] r10: ee6ebc10 r9 : ee6f8640 r8 : 0000000e [ 2.141309] r7 : eefe6d44 r6 : 00000005 r5 : ee365880 r4 : 00000005 [ 2.148139] r3 : c05d2064 r2 : 0000006d r1 : 00000005 r0 : ee370810 [ 2.154970] Flags: nzCv IRQs on FIQs on Mode SVC_32 ISA Thumb Segment none [ 2.162623] Control: 10c5387d Table: 8020406a DAC: 00000051 [ 2.168635] Process kworker/u4:0 (pid: 6, stack limit = 0xee08 [PYBOOT] [omap5uevm 02:28]: Timed out waiting for "<type 'str'>":
[PYBOOT] [omap5uevm 02:29]: got exception: timeout ~$off
[PYBOOT] [omap5uevm 02:30]: Done.
========================================================================
Board omap5uevm-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.811939] can: broadcast manager protocol (rev 20120528 t) [ 1.817900] can: netlink gateway (rev 20130117) max_hops=1 [ 1.823954] Key type dns_resolver registered [ 1.828544] omap_vc_init_channel: No PMIC info for vdd_core [ 1.834414] omap_vp_init: No PMIC info for vdd_core [ 1.839547] omap_vc_init_channel: No PMIC info for vdd_mm [ 1.845224] omap_vp_init: No PMIC info for vdd_mm [ 1.850158] omap_vc_init_channel: No PMIC info for vdd_mpu [ 1.855899] omap_vp_init: No PMIC info for vdd_mpu [ 1.861440] Power Management for TI OMAP4+ devices. [ 1.866666] ThumbEE CPU extension supported. [ 1.871152] Registering SWP/SWPB emulation handler [ 1.878210] palmas 0-0048: Irq flag is 0x00000000 [ 1.901436] mmc0: new high speed MMC card at address 0001 [ 1.907419] mmcblk0: mmc0:0001 SEM04G 3.69 GiB [ 1.912367] mmcblk0boot0: mmc0:0001 SEM04G partition 1 2.00 MiB [ 1.919003] mmcblk0boot1: mmc0:0001 SEM04G partition 2 2.00 MiB [ 1.925540] smsc95xx v1.0.4 [ 1.931244] palmas 0-0048: Muxing GPIO 2, PWM 0, LED 0 [ 1.942223] palmas-rtc 48070000.i2c:palmas@48:rtc: rtc core: registered 48070000.i2c:palmas as rtc0 [ 1.981851] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 1.991859] smsc95xx 1-3:1.0 eth0: register 'smsc95xx' at usb-4a064c00.ehci-3, smsc95xx USB 2.0 Ethernet, 7e:8e:ad:d8:08:50 [ 2.007503] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 2.048520] cpufreq: cpufreq_online: CPU0: Running at unlisted freq: 1100000 KHz [ 2.056453] cpufreq: cpufreq_online: CPU0: Unlisted initial frequency changed to: 1500000 KHz [ 2.066572] Unable to handle kernel NULL pointer dereference at virtual address 0000006c [ 2.075053] pgd = c0204000 [ 2.077892] [0000006c] *pgd=00000000 [ 2.081641] Internal error: Oops: 80000005 [#1] SMP ARM [ 2.087108] Modules linked in: [ 2.090309] CPU: 0 PID: 6 Comm: kworker/u4:0 Not tainted 4.6.0 #1 [ 2.096686] Hardware name: Generic OMAP5 (Flattened Device Tree) [ 2.102977] Workqueue: deferwq deferred_probe_work_func [ 2.108442] task: ee06da40 ti: ee0 [PYBOOT] [omap5uevm 02:03]: Timed out waiting for "<type 'str'>":
[PYBOOT] [omap5uevm 02:04]: got exception: timeout ~$off
[PYBOOT] [omap5uevm 02:05]: Done.
========================================================================
Board pi-arm-multi_lpae_defconfig failure log: -------------------------------------------------
[ 1.523068] isl29018 7-0044: No cache defaults, reading back from HW [ 1.529416] isl29018 7-0044: Failed to read 1: -6 [ 1.533998] isl29018 7-0044: regmap initialization fails: -6 [ 1.544228] NET: Registered protocol family 10 [ 1.548680] sit: IPv6 over IPv4 tunneling driver [ 1.552265] NET: Registered protocol family 17 [ 1.556266] can: controller area network core (rev 20120528 abi 9) [ 1.562454] NET: Registered protocol family 29 [ 1.566845] can: raw protocol (rev 20120528) [ 1.571094] can: broadcast manager protocol (rev 20120528 t) [ 1.576737] can: netlink gateway (rev 20130117) max_hops=1 [ 1.582461] Key type dns_resolver registered [ 1.586778] ThumbEE CPU extension supported. [ 1.590684] Registering SWP/SWPB emulation handler [ 1.599869] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.605350] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.611714] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.617093] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 1.627166] input: gpio-keys as /devices/platform/gpio-keys/input/input1 [ 1.633126] mmc_host mmc0: Bus speed (slot 0) = 200000000Hz (slot req 200000000Hz, actual 200000000HZ div = 0) [ 1.646557] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.652282] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.658390] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.663767] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 1.673510] max77686-rtc max77802-rtc: hctosys: unable to read the hardware clock [ 1.695582] Waiting for root device /dev/mmcblk0p1... [ 1.699430] mmc0: tuning execution failed: -5 [ 1.703519] mmc0: error -5 whilst initialising MMC card [ 2.572852] asix 1-1:1.0 eth0: register 'asix' at usb-xhci-hcd.2.auto-1, ASIX AX88772 USB 2.0 Ethernet, c8:b3:73:46:fb:95 [ 2.586127] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 2.591584] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 2.597959] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 2.603343] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo
[PYBOOT] [pi 01:53]: Timed out waiting for "<type 'str'>":
[PYBOOT] [pi 01:54]: got exception: timeout ~$off
[PYBOOT] [pi 01:55]: Done.
========================================================================
Board pi-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.523078] isl29018 7-0044: No cache defaults, reading back from HW [ 1.529425] isl29018 7-0044: Failed to read 1: -6 [ 1.534010] isl29018 7-0044: regmap initialization fails: -6 [ 1.544241] NET: Registered protocol family 10 [ 1.548693] sit: IPv6 over IPv4 tunneling driver [ 1.552278] NET: Registered protocol family 17 [ 1.556280] can: controller area network core (rev 20120528 abi 9) [ 1.562467] NET: Registered protocol family 29 [ 1.566857] can: raw protocol (rev 20120528) [ 1.571107] can: broadcast manager protocol (rev 20120528 t) [ 1.576749] can: netlink gateway (rev 20130117) max_hops=1 [ 1.582469] Key type dns_resolver registered [ 1.586795] ThumbEE CPU extension supported. [ 1.590696] Registering SWP/SWPB emulation handler [ 1.599893] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.605369] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.611736] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.617115] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 1.627185] input: gpio-keys as /devices/platform/gpio-keys/input/input1 [ 1.633147] mmc_host mmc0: Bus speed (slot 0) = 200000000Hz (slot req 200000000Hz, actual 200000000HZ div = 0) [ 1.646601] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.652329] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.658438] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.663814] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 1.673556] max77686-rtc max77802-rtc: hctosys: unable to read the hardware clock [ 1.695618] Waiting for root device /dev/mmcblk0p1... [ 1.699464] mmc0: tuning execution failed: -5 [ 1.703549] mmc0: error -5 whilst initialising MMC card [ 2.572863] asix 1-1:1.0 eth0: register 'asix' at usb-xhci-hcd.2.auto-1, ASIX AX88772 USB 2.0 Ethernet, c8:b3:73:46:fb:95 [ 2.586139] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 2.591597] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 2.597971] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 2.603355] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo
[PYBOOT] [pi 01:51]: Timed out waiting for "<type 'str'>":
[PYBOOT] [pi 01:52]: got exception: timeout ~$off
[PYBOOT] [pi 01:53]: Done.