Tree/Branch: next Git describe: next-20140618 Failed boot tests (console logs at the end) =========================================== armada-xp-openblocks-ax3-4: FAIL: arm-mvebu_v7_defconfig+CONFIG_CPU_BIG_ENDIAN=y armada-370-mirabox: FAIL: arm-mvebu_v7_defconfig+CONFIG_CPU_BIG_ENDIAN=y ste-snowball: FAIL: arm-u8500_defconfig armada-xp-openblocks-ax3-4: FAIL: arm-multi_v7_defconfig+CONFIG_CPU_BIG_ENDIAN=y armada-370-mirabox: FAIL: arm-multi_v7_defconfig+CONFIG_CPU_BIG_ENDIAN=y
Full Report ===========
arm-davinci_all_defconfig ------------------------- legacy,dm365evm 0 min 17.1 sec: PASS da850-evm 0 min 14.8 sec: PASS
arm-tegra_defconfig ------------------- tegra124-jetson-tk1 0 min 17.7 sec: PASS tegra30-beaver 0 min 17.4 sec: PASS
arm-multi_v7_defconfig+CONFIG_ARM_LPAE=y ---------------------------------------- tegra124-jetson-tk1 0 min 17.7 sec: PASS armada-xp-openblocks-ax3-4 0 min 24.0 sec: PASS omap5-uevm 1 min 37.5 sec: PASS (Warnings: 1) sun7i-a20-cubieboard2 0 min 13.1 sec: PASS (Warnings: 1)
arm-mvebu_v7_defconfig+CONFIG_CPU_BIG_ENDIAN=y ---------------------------------------------- armada-xp-openblocks-ax3-4 0 min 21.9 sec: FAIL armada-370-mirabox 0 min 19.1 sec: FAIL
arm-omap2plus_defconfig ----------------------- legacy,3730xm 0 min 39.7 sec: PASS am335x-boneblack 0 min 22.2 sec: PASS omap3-beagle-xm 0 min 50.4 sec: PASS legacy,3530beagle 0 min 27.7 sec: PASS (Warnings: 1) omap4-panda 0 min 53.4 sec: PASS (Warnings: 1) omap3-overo-tobi 0 min 22.6 sec: PASS am335x-bone 0 min 28.9 sec: PASS omap3-overo-storm-tobi 0 min 25.0 sec: PASS omap5-uevm 0 min 58.1 sec: PASS (Warnings: 1) omap3-n900 0 min 16.8 sec: PASS legacy,n900 0 min 16.9 sec: PASS (Warnings: 2) omap4-panda-es 0 min 49.5 sec: PASS (Warnings: 1) legacy,3730storm 0 min 23.1 sec: PASS legacy,3530overo 0 min 21.2 sec: PASS (Warnings: 1)
arm-multi_v7_defconfig ---------------------- imx6dl-wandboard,wand-solo 0 min 15.4 sec: PASS (Warnings: 1) am335x-boneblack 0 min 22.1 sec: PASS sun7i-a20-cubieboard2 0 min 13.1 sec: PASS (Warnings: 1) sun4i-a10-cubieboard 0 min 17.5 sec: PASS exynos5410-smdk5410 0 min 30.7 sec: PASS (Warnings: 3) am335x-bone 0 min 23.6 sec: PASS tegra124-jetson-tk1 0 min 17.9 sec: PASS armada-370-mirabox 0 min 21.8 sec: PASS omap4-panda 0 min 53.8 sec: PASS (Warnings: 1) imx6q-wandboard 0 min 14.4 sec: PASS imx6dl-wandboard,wand-dual 0 min 15.5 sec: PASS ste-snowball 1 min 11.4 sec: PASS tegra30-beaver 0 min 20.1 sec: PASS omap3-n900 0 min 16.5 sec: PASS qcom-apq8074-dragonboard 0 min 19.6 sec: PASS bcm28155-ap 0 min 26.3 sec: PASS omap3-overo-tobi 0 min 22.2 sec: PASS omap3-overo-storm-tobi 0 min 25.9 sec: PASS omap3-beagle-xm 0 min 50.1 sec: PASS exynos5420-arndale-octa 0 min 41.3 sec: PASS (Warnings: 7) armada-xp-openblocks-ax3-4 0 min 25.2 sec: PASS omap5-uevm 1 min 41.7 sec: PASS (Warnings: 1) omap4-panda-es 0 min 48.8 sec: PASS (Warnings: 1) exynos5250-arndale 0 min 37.2 sec: PASS
arm-sunxi_defconfig ------------------- sun7i-a20-cubieboard2 0 min 11.9 sec: PASS (Warnings: 1) sun4i-a10-cubieboard 0 min 11.4 sec: PASS
arm-qcom_defconfig ------------------ qcom-apq8074-dragonboard 0 min 17.2 sec: PASS
arm-bcm_defconfig ----------------- bcm28155-ap 0 min 23.4 sec: PASS
arm-exynos_defconfig -------------------- exynos5420-arndale-octa 0 min 39.9 sec: PASS (Warnings: 7) exynos5250-arndale 0 min 30.3 sec: PASS exynos5410-smdk5410 0 min 27.4 sec: PASS (Warnings: 3)
arm-imx_v6_v7_defconfig ----------------------- imx6dl-wandboard,wand-dual 0 min 15.6 sec: PASS imx6dl-wandboard,wand-solo 0 min 15.8 sec: PASS (Warnings: 1) imx6q-wandboard 0 min 14.1 sec: PASS
arm-u8500_defconfig ------------------- ste-snowball 1 min 50.6 sec: FAIL
arm-multi_v7_defconfig+CONFIG_CPU_BIG_ENDIAN=y ---------------------------------------------- armada-xp-openblocks-ax3-4 0 min 23.6 sec: FAIL armada-370-mirabox 0 min 19.4 sec: FAIL
arm-mvebu_v7_defconfig ---------------------- armada-xp-openblocks-ax3-4 0 min 22.5 sec: PASS armada-370-mirabox 0 min 20.2 sec: PASS
arm-sama5_defconfig ------------------- sama5d35ek 0 min 15.5 sec: PASS (Warnings: 1)
Console logs for failures =========================
arm-mvebu_v7_defconfig+CONFIG_CPU_BIG_ENDIAN=y ----------------------------------------------
armada-xp-openblocks-ax3-4: FAIL: last 40 lines of boot log: ------------------------------------------------------------
hub 2-0:1.0: 1 port detected usbcore: registered new interface driver usb-storage mousedev: PS/2 mouse device common for all mice ata1: SATA link down (SStatus 0 SControl F300) ata2: SATA link down (SStatus 0 SControl F300) rtc-mv d0010300.rtc: internal RTC not ticking request_module: runaway loop modprobe binfmt-4c46 rtc-s35390a 1-0030: rtc core: registered rtc-s35390a as rtc0 orion_wdt: Initial timeout 171 sec usbcore: registered new interface driver usbhid usbhid: USB HID core driver of-flash f0000000.nor: do_map_probe() failed TCP: cubic registered input: soc:internal-regs:gpio_keys as /devices/soc/soc:internal-regs/soc:internal-regs:gpio_keys/input/input0 rtc-s35390a 1-0030: setting system clock to 2014-06-18 06:10:56 UTC (1403071856) ALSA device list: No soundcards found. Freeing unused kernel memory: 216K (c0584000 - c05ba000) Failed to execute /init (error -8) Starting init: /sbin/init exists but couldn't execute it (error -8) Starting init: /bin/sh exists but couldn't execute it (error -8) Kernel panic - not syncing: No working init found. Try passing init= option to kernel. See Linux Documentation/init.txt for guidance. CPU1: stopping CPU: 1 PID: 0 Comm: swapper/1 Not tainted 3.16.0-rc1-next-20140618 #1 [<c0014b04>] (unwind_backtrace) from [<c0010eb0>] (show_stack+0x10/0x14) [<c0010eb0>] (show_stack) from [<c0427790>] (dump_stack+0x74/0x90) [<c0427790>] (dump_stack) from [<c00139dc>] (handle_IPI+0x134/0x170) [<c00139dc>] (handle_IPI) from [<c0008650>] (armada_370_xp_handle_irq+0xb0/0xcc) [<c0008650>] (armada_370_xp_handle_irq) from [<c0011980>] (__irq_svc+0x40/0x50) Exception stack(0xee87dfa8 to 0xee87dff0) dfa0: eefe03d8 00000000 00000cd0 00000000 ee87c000 c05c449c dfc0: c042ed88 c05f9e55 c05f9e55 562f5842 00000001 00000000 00000000 ee87dff0 dfe0: c000f168 c004eaf8 60000313 ffffffff [<c0011980>] (__irq_svc) from [<c004eaf8>] (cpu_startup_entry+0xe8/0x140) [<c004eaf8>] (cpu_startup_entry) from [<00008768>] (0x8768) ---[ end Kernel panic - not syncing: No working init found. Try passing init= option to kernel. See Linux Documentation/init.txt for guidance. ~$off # PYBOOT: Exception: userspace: failed to find root shell: Kernel panic # PYBOOT: Time: 21.91 seconds. # PYBOOT: Result: FAIL
armada-370-mirabox: FAIL: last 40 lines of boot log: ----------------------------------------------------
orion-ehci d0051000.usb: EHCI Host Controller orion-ehci d0051000.usb: new USB bus registered, assigned bus number 2 orion-ehci d0051000.usb: irq 26, io mem 0xd0051000 orion-ehci d0051000.usb: USB 2.0 started, EHCI 1.00 hub 2-0:1.0: USB hub found hub 2-0:1.0: 1 port detected xhci_hcd 0000:02:00.0: xHCI Host Controller xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 3 hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected xhci_hcd 0000:02:00.0: xHCI Host Controller xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 4 hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected usbcore: registered new interface driver usb-storage mousedev: PS/2 mouse device common for all mice rtc-mv d0010300.rtc: rtc core: registered d0010300.rtc as rtc0 request_module: runaway loop modprobe binfmt-4c46 orion_wdt: Initial timeout 229 sec usbcore: registered new interface driver usbhid usbhid: USB HID core driver TCP: cubic registered rtc-mv d0010300.rtc: setting system clock to 2014-06-17 11:54:10 UTC (1403006050) ALSA device list: No soundcards found. Freeing unused kernel memory: 216K (c0584000 - c05ba000) request_module: runaway loop modprobe binfmt-4c46 Failed to execute /init (error -8) mmc0: new high speed SDIO card at address 0001 mwifiex_sdio mmc0:0001:1: Direct firmware load failed with error -2 mwifiex_sdio mmc0:0001:1: Falling back to user helper Bluetooth: vendor=0x2df, device=0x911a, class=255, fn=2 Starting init: /sbin/init exists but couldn't execute it (error -8) Starting init: /bin/sh exists but couldn't execute it (error -8) Kernel panic - not syncing: No working init found. Try passing init= option to kernel. See Linux Documentation/init.txt for guidance. ---[ end Kernel panic - not syncing: No working init found. Try passing init= option to kernel. See Linux Documentation/init.txt for guidance. ~$off # PYBOOT: Exception: userspace: failed to find root shell: Kernel panic # PYBOOT: Time: 19.09 seconds. # PYBOOT: Result: FAIL
arm-u8500_defconfig -------------------
ste-snowball: FAIL: last 40 lines of boot log: ----------------------------------------------
[ 3.503540] musb-hdrc musb-hdrc.20.auto: musb_init_controller failed with status -517 [ 3.511413] platform musb-hdrc.20.auto: Driver musb-hdrc requests probe deferral [ 3.519317] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.20.auto [ 3.531219] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.20.auto) status -22 [ 3.538543] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.550018] musb-ux500 musb-hdrc.20.auto: Error applying setting, reverse things back [ 3.558563] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.21.auto [ 3.570495] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.21.auto) status -22 [ 3.577819] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.589294] musb-hdrc musb-hdrc.21.auto: Error applying setting, reverse things back [ 3.597106] HS USB OTG: no transceiver configured [ 3.601837] musb-hdrc musb-hdrc.21.auto: musb_init_controller failed with status -517 [ 3.609680] platform musb-hdrc.21.auto: Driver musb-hdrc requests probe deferral [ 3.617584] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.21.auto [ 3.629516] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.21.auto) status -22 [ 3.636840] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.648315] musb-ux500 musb-hdrc.21.auto: Error applying setting, reverse things back [ 3.656829] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.22.auto [ 3.668762] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.22.auto) status -22 [ 3.676086] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.687561] musb-hdrc musb-hdrc.22.auto: Error applying setting, reverse things back [ 3.695404] HS USB OTG: no transceiver configured [ 3.700103] musb-hdrc musb-hdrc.22.auto: musb_init_controller failed with status -517 [ 3.707946] platform musb-hdrc.22.auto: Driver musb-hdrc requests probe deferral [ 3.715881] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.22.auto [ 3.727783] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.22.auto) status -22 [ 3.735107] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.746582] musb-ux500 musb-hdrc.22.auto: Error applying setting, reverse things back [ 3.755096] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.23.auto [ 3.767028] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.23.auto) status -22 [ 3.774353] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.785827] musb-hdrc musb-hdrc.23.auto: Error applying setting, reverse things back [ 3.793670] HS USB OTG: no transceiver configured [ 3.798370] musb-hdrc musb-hdrc.23.auto: musb_init_controller failed with status -517 [ 3.806213] platform musb-hdrc.23.auto: Driver musb-hdrc requests probe deferral [ 3.814147] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.23.auto ~$off # PYBOOT: Exception: kernel: ERROR: failed to boot: <class 'pexpect.TIMEOUT'> # PYBOOT: Time: 110.57 seconds. # PYBOOT: Result: FAIL
arm-multi_v7_defconfig+CONFIG_CPU_BIG_ENDIAN=y ----------------------------------------------
armada-xp-openblocks-ax3-4: FAIL: last 40 lines of boot log: ------------------------------------------------------------
[ 2.517500] NET: Registered protocol family 29 [ 2.521973] can: raw protocol (rev 20120528) [ 2.526266] can: broadcast manager protocol (rev 20120528 t) [ 2.531958] can: netlink gateway (rev 20130117) max_hops=1 [ 2.537714] Key type dns_resolver registered [ 2.542068] ThumbEE CPU extension supported. [ 2.546371] Registering SWP/SWPB emulation handler [ 2.552088] input: soc:internal-regs:gpio_keys as /devices/soc/soc:internal-regs/soc:internal-regs:gpio_keys/input/input0 [ 2.563269] ../drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 2.570754] ALSA device list: [ 2.573730] No soundcards found. [ 2.577857] Freeing unused kernel memory: 660K (c0acb000 - c0b70000) [ 2.600397] Failed to execute /init (error -8) [ 2.613426] Starting init: /sbin/init exists but couldn't execute it (error -8) [ 2.629145] Starting init: /bin/sh exists but couldn't execute it (error -8) [ 2.636367] Kernel panic - not syncing: No working init found. Try passing init= option to kernel. See Linux Documentation/init.txt for guidance. [ 2.649530] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.16.0-rc1-next-20140618 #1 [ 2.657054] [<c0215a54>] (unwind_backtrace) from [<c021160c>] (show_stack+0x10/0x14) [ 2.664824] [<c021160c>] (show_stack) from [<c080659c>] (dump_stack+0x78/0x94) [ 2.672068] [<c080659c>] (dump_stack) from [<c08040f4>] (panic+0x90/0x21c) [ 2.678969] [<c08040f4>] (panic) from [<c0801e6c>] (kernel_init+0xc8/0xec) [ 2.685865] [<c0801e6c>] (kernel_init) from [<c020e9b8>] (ret_from_fork+0x14/0x3c) [ 2.693457] CPU1: stopping [ 2.696175] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 3.16.0-rc1-next-20140618 #1 [ 2.703685] [<c0215a54>] (unwind_backtrace) from [<c021160c>] (show_stack+0x10/0x14) [ 2.711453] [<c021160c>] (show_stack) from [<c080659c>] (dump_stack+0x78/0x94) [ 2.718696] [<c080659c>] (dump_stack) from [<c021429c>] (handle_IPI+0x138/0x174) [ 2.726113] [<c021429c>] (handle_IPI) from [<c02087f0>] (armada_370_xp_handle_irq+0xb0/0xcc) [ 2.734575] [<c02087f0>] (armada_370_xp_handle_irq) from [<c0212100>] (__irq_svc+0x40/0x50) [ 2.742946] Exception stack(0xea079f98 to 0xea079fe0) [ 2.748010] 9f80: ffffffed 00000000 [ 2.756209] 9fa0: ffffffed 00000000 c0b7a4c4 c0b7a458 00000000 00000000 c0b6eda8 0000004c [ 2.764409] 9fc0: 00000000 ea078000 00000000 ea079fe0 c020f4e4 c027b13c 60000313 ffffffff [ 2.772613] [<c0212100>] (__irq_svc) from [<c027b13c>] (cpu_startup_entry+0x1c8/0x208) [ 2.780553] [<c027b13c>] (cpu_startup_entry) from [<00208ac8>] (0x208ac8) [ 2.787362] ---[ end Kernel panic - not syncing: No working init found. Try passing init= option to kernel. See Linux Documentation/init.txt for guidance. ~$off # PYBOOT: Exception: userspace: failed to find root shell: Kernel panic # PYBOOT: Time: 23.61 seconds. # PYBOOT: Result: FAIL
armada-370-mirabox: FAIL: last 40 lines of boot log: ----------------------------------------------------
[ 1.433806] orion_wdt: Initial timeout 229 sec [ 1.439113] sdhci: Secure Digital Host Controller Interface driver [ 1.445321] sdhci: Copyright(c) Pierre Ossman [ 1.477964] Synopsys Designware Multimedia Card Interface Driver [ 1.484374] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.490671] usbcore: registered new interface driver usbhid [ 1.496272] usbhid: USB HID core driver [ 1.502985] TCP: cubic registered [ 1.506320] NET: Registered protocol family 17 [ 1.510802] can: controller area network core (rev 20120528 abi 9) [ 1.517075] NET: Registered protocol family 29 [ 1.521555] can: raw protocol (rev 20120528) [ 1.525854] can: broadcast manager protocol (rev 20120528 t) [ 1.531542] can: netlink gateway (rev 20130117) max_hops=1 [ 1.537362] Key type dns_resolver registered [ 1.541735] ThumbEE CPU extension supported. [ 1.546038] Registering SWP/SWPB emulation handler [ 1.551881] rtc-mv d0010300.rtc: setting system clock to 2014-06-17 11:52:47 UTC (1403005967) [ 1.561071] ALSA device list: [ 1.564063] No soundcards found. [ 1.568278] Freeing unused kernel memory: 660K (c0acb000 - c0b70000) [ 1.585201] request_module: runaway loop modprobe binfmt-4c46 [ 1.601312] request_module: runaway loop modprobe binfmt-4c46 [ 1.607364] usb 1-1: new high-speed USB device number 2 using orion-ehci [ 1.616761] Failed to execute /init (error -8) [ 1.629760] mmc0: new high speed SDIO card at address 0001 [ 1.639521] Starting init: /sbin/init exists but couldn't execute it (error -8) [ 1.656623] Starting init: /bin/sh exists but couldn't execute it (error -8) [ 1.663757] Kernel panic - not syncing: No working init found. Try passing init= option to kernel. See Linux Documentation/init.txt for guidance. [ 1.676910] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.16.0-rc1-next-20140618 #1 [ 1.684436] [<c0215a54>] (unwind_backtrace) from [<c021160c>] (show_stack+0x10/0x14) [ 1.692203] [<c021160c>] (show_stack) from [<c080659c>] (dump_stack+0x78/0x94) [ 1.699442] [<c080659c>] (dump_stack) from [<c08040f4>] (panic+0x90/0x21c) [ 1.706342] [<c08040f4>] (panic) from [<c0801e6c>] (kernel_init+0xc8/0xec) [ 1.713234] [<c0801e6c>] (kernel_init) from [<c020e9b8>] (ret_from_fork+0x14/0x3c) [ 1.720822] ---[ end Kernel panic - not syncing: No working init found. Try passing init= option to kernel. See Linux Documentation/init.txt for guidance. ~$off # PYBOOT: Exception: userspace: failed to find root shell: Kernel panic # PYBOOT: Time: 19.42 seconds. # PYBOOT: Result: FAIL