Full logs are available at http://arm-soc.lixom.net/bootlogs/mainline/v4.6-rc7-55-gc511462/
Failed boards:
arndale multi_v7_nosmp_defconfig : NO BUILD bbb arm-omap2plus_defconfig : FAILED 1:53.77 bbb arm-multi_v7_defconfig : FAILED 1:54.26 bbb multi_v7_nosmp_defconfig : NO BUILD beagleboard-x15 arm-omap2plus_defconfig : FAILED 1:44.17 beagleboard-x15 arm-multi_v7_defconfig : FAILED 1:44.36 beagleboard-x15 arm-multi_lpae_defconfig : FAILED 1:57.81 beagleboard-x15 multi_v7_nosmp_defconfig : NO BUILD beaver multi_v7_nosmp_defconfig : NO BUILD capri multi_v7_nosmp_defconfig : NO BUILD chitra powerpc-pasemi_defconfig : BUILD FAILED colibri-vf61 multi_v7_nosmp_defconfig : NO BUILD colombus multi_v7_nosmp_defconfig : NO BUILD cosmic arm-imx_v6_v7_defconfig : FAILED 2:01.56 cosmic arm-multi_v7_defconfig : FAILED 2:13.13 cosmic multi_v7_nosmp_defconfig : NO BUILD cubie multi_v7_nosmp_defconfig : NO BUILD cubie2 multi_v7_nosmp_defconfig : NO BUILD cubox multi_v7_nosmp_defconfig : NO BUILD dalmore arm-tegra_defconfig : FAILED 1:48.30 dalmore arm-multi_v7_defconfig : FAILED 1:57.43 dalmore arm-multi_lpae_defconfig : FAILED 2:02.26 dalmore multi_v7_nosmp_defconfig : NO BUILD hummingboard multi_v7_nosmp_defconfig : NO BUILD jetsontk1 multi_v7_nosmp_defconfig : NO BUILD minnowmax minnowmax_defconfig : NO BUILD odroidu3 arm-exynos_defconfig : FAILED 1:48.76 omap5uevm arm-multi_v7_defconfig : FAILED 0:48.42 omap5uevm arm-multi_lpae_defconfig : FAILED 0:50.61 omap5uevm multi_v7_nosmp_defconfig : NO BUILD pandaes multi_v7_nosmp_defconfig : NO BUILD parallella multi_v7_nosmp_defconfig : NO BUILD pi multi_v7_nosmp_defconfig : NO BUILD pit multi_v7_nosmp_defconfig : NO BUILD rk3288evb multi_v7_nosmp_defconfig : NO BUILD seaboard arm-tegra_defconfig : FAILED 1:50.14 seaboard arm-multi_v7_defconfig : FAILED 1:53.27 seaboard multi_v7_nosmp_defconfig : NO BUILD snow multi_v7_nosmp_defconfig : NO BUILD snowball arm-u8500_defconfig : FAILED 1:58.20 snowball arm-multi_v7_defconfig : FAILED 2:12.25 snowball multi_v7_nosmp_defconfig : NO BUILD socfpga multi_v7_nosmp_defconfig : NO BUILD trimslice multi_v7_nosmp_defconfig : NO BUILD wandboard arm-imx_v6_v7_defconfig : FAILED 2:58.42 wandboard multi_v7_nosmp_defconfig : NO BUILD
Successful boards:
apc arm-vt8500_v6_v7_defconfig : passed 1:11.81 arndale arm-exynos_defconfig : passed 1:31.70 arndale arm-multi_v7_defconfig : passed 1:23.00 arndale arm-multi_lpae_defconfig : passed 1:25.43 capri arm-bcm_defconfig : passed 0:48.69 capri arm-multi_v7_defconfig : passed 0:52.97 chitra powerpc-ppc64_defconfig : passed 2:08.32 colombus arm-sunxi_defconfig : passed 2:19.18 colombus arm-multi_v7_defconfig : passed 2:32.15 colombus arm-multi_lpae_defconfig : passed 2:28.03 cubie arm-sunxi_defconfig : passed 0:52.70 cubie arm-multi_v7_defconfig : passed 1:02.05 cubie2 arm-sunxi_defconfig : passed 0:50.36 cubie2 arm-multi_v7_defconfig : passed 0:57.65 cubie2 arm-multi_lpae_defconfig : passed 0:53.83 cubox arm-multi_v7_defconfig : passed 1:14.00 cubox arm-mvebu_v7_defconfig : passed 1:18.76 hummingboard arm-imx_v6_v7_defconfig : passed 1:24.11 hummingboard arm-multi_v7_defconfig : passed 1:22.35 jetsontk1 arm-tegra_defconfig : passed 1:36.93 jetsontk1 arm-multi_v7_defconfig : passed 1:39.89 jetsontk1 arm-multi_lpae_defconfig : passed 1:37.96 omap5uevm arm-omap2plus_defconfig : passed 1:08.63 pandaes arm-omap2plus_defconfig : warnings 1:36.13 pandaes arm-multi_v7_defconfig : passed 1:47.22 pi arm-exynos_defconfig : passed 2:06.42 pi arm-multi_v7_defconfig : passed 2:18.71 pi arm-multi_lpae_defconfig : passed 2:24.15 pit arm-exynos_defconfig : passed 2:12.18 pit arm-multi_v7_defconfig : passed 2:16.90 pit arm-multi_lpae_defconfig : passed 2:17.62 seattle arm64-defconfig : warnings 2:21.13 snow arm-exynos_defconfig : passed 2:06.15 snow arm-multi_v7_defconfig : passed 1:58.99 snow arm-multi_lpae_defconfig : passed 1:58.38 trimslice arm-tegra_defconfig : passed 1:31.58 trimslice arm-multi_v7_defconfig : passed 1:37.26 wandboard arm-multi_v7_defconfig : passed 1:03.16
Offline boards:
beaver arm-tegra_defconfig : OFFLINE 2:13.85 beaver arm-multi_v7_defconfig : OFFLINE 2:16.45 colibri-vf61 arm-imx_v6_v7_defconfig : OFFLINE 2:13.28 colibri-vf61 arm-multi_v7_defconfig : OFFLINE 2:17.68 parallella arm-multi_v7_defconfig : OFFLINE 2:20.88 rk3288evb arm-multi_v7_defconfig : OFFLINE 0:47.74 rk3288evb arm-multi_lpae_defconfig : OFFLINE 0:48.65 sama5 arm-sama5_defconfig : OFFLINE 2:21.30 sama5d3-xplained arm-sama5_defconfig : OFFLINE 2:21.14 socfpga arm-socfpga_defconfig : OFFLINE 2:21.46 socfpga arm-multi_v7_defconfig : OFFLINE 2:20.32
Board legend is available at http://arm-soc.lixom.net/boards.html
Board bbb-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.630939] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.641192] ledtrig-cpu: registered to indicate activity on CPUs [ 1.648289] usbcore: registered new interface driver usbhid [ 1.654214] usbhid: USB HID core driver [ 1.666165] NET: Registered protocol family 10 [ 1.672746] sit: IPv6 over IPv4 tunneling driver [ 1.678889] NET: Registered protocol family 17 [ 1.683664] can: controller area network core (rev 20120528 abi 9) [ 1.690300] NET: Registered protocol family 29 [ 1.695026] can: raw protocol (rev 20120528) [ 1.699548] can: broadcast manager protocol (rev 20120528 t) [ 1.705543] can: netlink gateway (rev 20130117) max_hops=1 [ 1.712298] Key type dns_resolver registered [ 1.717204] omap_voltage_late_init: Voltage driver support not added [ 1.725480] ThumbEE CPU extension supported. [ 1.730107] Registering SWP/SWPB emulation handler [ 1.772440] tps65217 0-0024: TPS65217 ID 0xe version 1.2 [ 1.778971] at24 0-0050: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.786732] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 1.795415] at24 2-0054: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.803320] at24 2-0055: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.811148] at24 2-0056: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.818953] at24 2-0057: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.826307] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz [ 1.835000] cpufreq: cpufreq_online: CPU0: Running at unlisted freq: 550000 KHz [ 1.842926] cpufreq: cpufreq_online: CPU0: Unlisted initial frequency changed to: 600000 KHz [ 1.852651] mmc1: new high speed MMC card at address 0001 [ 1.859900] hctosys: unable to open rtc device (rtc0) [ 1.872892] mmcblk1: mmc1:0001 MMC02G 1.79 GiB [ 1.878917] mmcblk1boot0: mmc1:0001 MMC02G partition 1 1.00 MiB [ 1.885905] mmcblk1boot1: mmc1:0001 MMC02G partition 2 1.00 MiB [ 1.894748] mmcblk1: p1 p2 [ 1.900462] Waiting for root device /dev/mmcblk0p2...
[PYBOOT] [bbb 01:51]: Timed out waiting for "<type 'str'>":
[PYBOOT] [bbb 01:52]: got exception: timeout ~$off
[PYBOOT] [bbb 01:53]: Done. Board bbb-arm-omap2plus_defconfig failure log: -------------------------------------------------
[ 2.043150] omap_hsmmc 481d8000.mmc: lookup for GPIO cd failed [ 2.049268] omap_hsmmc 481d8000.mmc: GPIO lookup for consumer wp [ 2.055595] omap_hsmmc 481d8000.mmc: using device tree for GPIO lookup [ 2.062468] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@481d8000[0]' [ 2.072059] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@481d8000[0]' [ 2.081555] omap_hsmmc 481d8000.mmc: using lookup tables for GPIO lookup [ 2.088570] omap_hsmmc 481d8000.mmc: lookup for GPIO wp failed [ 2.131994] ledtrig-cpu: registered to indicate activity on CPUs [ 2.140668] oprofile: using arm/armv7 [ 2.145752] Initializing XFRM netlink socket [ 2.150822] NET: Registered protocol family 10 [ 2.161487] sit: IPv6 over IPv4 tunneling driver [ 2.170252] NET: Registered protocol family 17 [ 2.175180] NET: Registered protocol family 15 [ 2.180395] Key type dns_resolver registered [ 2.185326] omap_voltage_late_init: Voltage driver support not added [ 2.192064] sr_dev_init: No voltage domain specified for smartreflex0. Cannot initialize [ 2.200527] sr_dev_init: No voltage domain specified for smartreflex1. Cannot initialize [ 2.210763] ThumbEE CPU extension supported. [ 2.215406] Registering SWP/SWPB emulation handler [ 2.220437] SmartReflex Class3 initialized [ 2.289901] tps65217 0-0024: TPS65217 ID 0xe version 1.2 [ 2.297177] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 2.307689] mmc1: new high speed MMC card at address 0001 [ 2.319793] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz [ 2.328082] mmcblk1: mmc1:0001 MMC02G 1.79 GiB [ 2.335859] hctosys: unable to open rtc device (rtc0) [ 2.341177] sr_init: No PMIC hook to init smartreflex [ 2.346964] sr_init: platform driver register failed for SR [ 2.386761] mmcblk1boot0: mmc1:0001 MMC02G partition 1 1.00 MiB [ 2.394729] mmcblk1boot1: mmc1:0001 MMC02G partition 2 1.00 MiB [ 2.409030] mmcblk1: p1 p2 [ 2.426537] Waiting for root device /dev/mmcblk0p2...
[PYBOOT] [bbb 01:51]: Timed out waiting for "<type 'str'>":
[PYBOOT] [bbb 01:52]: got exception: timeout ~$off
[PYBOOT] [bbb 01:53]: Done. Board beagleboard-x15-arm-multi_lpae_defconfig failure log: -------------------------------------------------
[ 1.717385] at24 0-0050: 4096 byte 24c32 EEPROM, writable, 1 bytes/write [ 1.724468] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 1.750732] rtc-ds1307 2-006f: SET TIME! [ 1.756483] rtc-ds1307 2-006f: rtc core: registered mcp7941x as rtc0 [ 1.763233] rtc-ds1307 2-006f: 64 bytes nvram [ 1.767849] omap_i2c 48060000.i2c: bus 2 rev0.12 at 400 kHz [ 1.776042] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 1.781834] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 [ 1.790082] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x00010010 [ 1.799253] xhci-hcd xhci-hcd.0.auto: irq 400, io mem 0x48890000 [ 1.806131] hub 1-0:1.0: USB hub found [ 1.810084] hub 1-0:1.0: 1 port detected [ 1.814482] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 1.820260] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 [ 1.828367] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.837386] hub 2-0:1.0: USB hub found [ 1.841351] hub 2-0:1.0: 1 port detected [ 1.847361] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 1.881347] vdd_3v3: supplied by regen1 [ 1.919419] rtc-ds1307 2-006f: setting system clock to 2001-01-01 00:00:00 UTC (978307200) [ 1.937352] aic_dvdd_fixed: disabling [ 1.942085] Waiting for root device /dev/mmcblk0p1... [ 1.969254] mmc1: new high speed MMC card at address 0001 [ 1.975231] mmcblk1: mmc1:0001 S10004 3.56 GiB [ 1.980102] mmcblk1boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 1.986437] mmcblk1boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 1.993302] mmcblk1: p1 [ 2.120230] usb 1-1: new high-speed USB device number 2 using xhci-hcd [ 2.155253] usb 2-1: new SuperSpeed USB device number 2 using xhci-hcd [ 2.180481] hub 2-1:1.0: USB hub found [ 2.184460] hub 2-1:1.0: 4 ports detected [ 2.276500] hub 1-1:1.0: USB hub found [ 2.280487] hub 1-1:1.0: 4 ports detected
[PYBOOT] [beagleboard-x15 01:54]: Timed out waiting for "<type 'str'>":
[PYBOOT] [beagleboard-x15 01:55]: got exception: timeout ~$off
[PYBOOT] [beagleboard-x15 01:57]: Done. Board beagleboard-x15-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.718075] at24 0-0050: 4096 byte 24c32 EEPROM, writable, 1 bytes/write [ 1.725153] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 1.750746] rtc-ds1307 2-006f: SET TIME! [ 1.756521] rtc-ds1307 2-006f: rtc core: registered mcp7941x as rtc0 [ 1.763272] rtc-ds1307 2-006f: 64 bytes nvram [ 1.767884] omap_i2c 48060000.i2c: bus 2 rev0.12 at 400 kHz [ 1.776080] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 1.781877] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 [ 1.790120] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x00010010 [ 1.799283] xhci-hcd xhci-hcd.0.auto: irq 400, io mem 0x48890000 [ 1.806157] hub 1-0:1.0: USB hub found [ 1.810112] hub 1-0:1.0: 1 port detected [ 1.814521] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 1.820303] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 [ 1.828415] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.837409] hub 2-0:1.0: USB hub found [ 1.841381] hub 2-0:1.0: 1 port detected [ 1.847374] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 1.881356] vdd_3v3: supplied by regen1 [ 1.917968] rtc-ds1307 2-006f: setting system clock to 2001-01-01 00:00:00 UTC (978307200) [ 1.935506] aic_dvdd_fixed: disabling [ 1.940260] Waiting for root device /dev/mmcblk0p1... [ 1.962296] mmc1: new high speed MMC card at address 0001 [ 1.968261] mmcblk1: mmc1:0001 S10004 3.56 GiB [ 1.973148] mmcblk1boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 1.979495] mmcblk1boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 1.986361] mmcblk1: p1 [ 2.120237] usb 1-1: new high-speed USB device number 2 using xhci-hcd [ 2.155267] usb 2-1: new SuperSpeed USB device number 2 using xhci-hcd [ 2.180521] hub 2-1:1.0: USB hub found [ 2.184500] hub 2-1:1.0: 4 ports detected [ 2.276541] hub 1-1:1.0: USB hub found [ 2.280520] hub 1-1:1.0: 4 ports detected
[PYBOOT] [beagleboard-x15 01:41]: Timed out waiting for "<type 'str'>":
[PYBOOT] [beagleboard-x15 01:42]: got exception: timeout ~$off
[PYBOOT] [beagleboard-x15 01:43]: Done. Board beagleboard-x15-arm-omap2plus_defconfig failure log: -------------------------------------------------
[ 2.173992] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 2.180856] of_get_named_gpiod_flags: parsed 'cd-gpios' property of node '/ocp/mmc@4809c000[0]' - status (0) [ 2.191247] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 2.196113] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer wp [ 2.202409] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 2.209273] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@4809c000[0]' [ 2.218866] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@4809c000[0]' [ 2.228373] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 2.235436] omap_hsmmc 4809c000.mmc: lookup for GPIO wp failed [ 2.283731] omap_hsmmc 480b4000.mmc: GPIO lookup for consumer cd [ 2.290029] omap_hsmmc 480b4000.mmc: using device tree for GPIO lookup [ 2.296902] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/ocp/mmc@480b4000[0]' [ 2.306498] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/ocp/mmc@480b4000[0]' [ 2.315990] omap_hsmmc 480b4000.mmc: using lookup tables for GPIO lookup [ 2.323030] omap_hsmmc 480b4000.mmc: lookup for GPIO cd failed [ 2.329155] omap_hsmmc 480b4000.mmc: GPIO lookup for consumer wp [ 2.335472] omap_hsmmc 480b4000.mmc: using device tree for GPIO lookup [ 2.342318] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@480b4000[0]' [ 2.351902] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@480b4000[0]' [ 2.361401] omap_hsmmc 480b4000.mmc: using lookup tables for GPIO lookup [ 2.368441] omap_hsmmc 480b4000.mmc: lookup for GPIO wp failed [ 2.375141] vdd_3v3: supplied by regen1 [ 2.413798] hctosys: unable to open rtc device (rtc0) [ 2.419101] sr_init: No PMIC hook to init smartreflex [ 2.424607] sr_init: platform driver register failed for SR [ 2.471935] aic_dvdd_fixed: disabling [ 2.476202] ldousb: disabling [ 2.483785] Waiting for root device /dev/mmcblk0p1... [ 2.535430] mmc1: new high speed MMC card at address 0001 [ 2.543192] mmcblk1: mmc1:0001 S10004 3.56 GiB [ 2.548530] mmcblk1boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 2.555327] mmcblk1boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 2.563866] mmcblk1: p1
[PYBOOT] [beagleboard-x15 01:41]: Timed out waiting for "<type 'str'>":
[PYBOOT] [beagleboard-x15 01:42]: got exception: timeout ~$off
[PYBOOT] [beagleboard-x15 01:43]: Done. Board cosmic-arm-imx_v6_v7_defconfig failure log: -------------------------------------------------
[ 14.483842] blk_update_request: I/O error, dev mmcblk0, sector 3633185 [ 18.558081] mmcblk0: error -110 transferring data, sector 3633186, nr 230, cmd response 0x900, card status 0x0 [ 18.568403] blk_update_request: I/O error, dev mmcblk0, sector 3633186 [ 22.642640] mmcblk0: error -110 transferring data, sector 3633187, nr 229, cmd response 0x900, card status 0x0 [ 22.652962] blk_update_request: I/O error, dev mmcblk0, sector 3633187 [ 26.727192] mmcblk0: error -110 transferring data, sector 3633188, nr 228, cmd response 0x900, card status 0x0 [ 26.737520] blk_update_request: I/O error, dev mmcblk0, sector 3633188 [ 30.811721] mmcblk0: error -110 transferring data, sector 3633189, nr 227, cmd response 0x900, card status 0x0 [ 30.822051] blk_update_request: I/O error, dev mmcblk0, sector 3633189 [ 34.896290] mmcblk0: error -110 transferring data, sector 3633190, nr 226, cmd response 0x900, card status 0x0 [ 34.906620] blk_update_request: I/O error, dev mmcblk0, sector 3633190 [ 38.980807] mmcblk0: error -110 transferring data, sector 3633191, nr 225, cmd response 0x900, card status 0x0 [ 38.991130] blk_update_request: I/O error, dev mmcblk0, sector 3633191 [ 43.065385] mmcblk0: error -110 transferring data, sector 3633192, nr 224, cmd response 0x900, card status 0x0 [ 43.075707] blk_update_request: I/O error, dev mmcblk0, sector 3633192 [ 47.149893] mmcblk0: error -110 transferring data, sector 3633193, nr 223, cmd response 0x900, card status 0x0 [ 47.160212] blk_update_request: I/O error, dev mmcblk0, sector 3633193 [ 51.234449] mmcblk0: error -110 transferring data, sector 3633194, nr 222, cmd response 0x900, card status 0x0 [ 51.244764] blk_update_request: I/O error, dev mmcblk0, sector 3633194 [ 55.319005] mmcblk0: error -110 transferring data, sector 3633195, nr 221, cmd response 0x900, card status 0x0 [ 55.329326] blk_update_request: I/O error, dev mmcblk0, sector 3633195 [ 59.403559] mmcblk0: error -110 transferring data, sector 3633196, nr 220, cmd response 0x900, card status 0x0 [ 59.413880] blk_update_request: I/O error, dev mmcblk0, sector 3633196 [ 63.488106] mmcblk0: error -110 transferring data, sector 3633197, nr 219, cmd response 0x900, card status 0x0 [ 63.498426] blk_update_request: I/O error, dev mmcblk0, sector 3633197 [ 67.572663] mmcblk0: error -110 transferring data, sector 3633198, nr 218, cmd response 0x900, card status 0x0 [ 67.582980] blk_update_request: I/O error, dev mmcblk0, sector 3633198 [ 71.657207] mmcblk0: error -110 transferring data, sector 3633199, nr 217, cmd response 0x900, card status 0x0 [ 71.667523] blk_update_request: I/O error, dev mmcblk0, sector 3633199 [ 75.741710] mmcblk0: error -110 transferring data, sector 3633200, nr 216, cmd response 0x900, card status 0x0 [ 75.752035] blk_update_request: I/O error, dev mmcblk0, sector 3633200 [ 79.826264] mmcblk0: error -110 transferring data, sector 3633201, nr 215, cmd response 0x900, card status 0x0 [ 79.836589] blk_update_request: I/O error, dev mmcblk0, sector 3633201
[PYBOOT] [cosmic 01:58]: Timed out waiting for "<type 'str'>":
[PYBOOT] [cosmic 01:59]: got exception: timeout ~$off
[PYBOOT] [cosmic 02:00]: Done. Board cosmic-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 14.078110] blk_update_request: I/O error, dev mmcblk0, sector 3633185 [ 18.152095] mmcblk0: error -110 transferring data, sector 3633186, nr 230, cmd response 0x900, card status 0x0 [ 18.162169] blk_update_request: I/O error, dev mmcblk0, sector 3633186 [ 22.236152] mmcblk0: error -110 transferring data, sector 3633187, nr 229, cmd response 0x900, card status 0x0 [ 22.246229] blk_update_request: I/O error, dev mmcblk0, sector 3633187 [ 26.320211] mmcblk0: error -110 transferring data, sector 3633188, nr 228, cmd response 0x900, card status 0x0 [ 26.330291] blk_update_request: I/O error, dev mmcblk0, sector 3633188 [ 30.404271] mmcblk0: error -110 transferring data, sector 3633189, nr 227, cmd response 0x900, card status 0x0 [ 30.414350] blk_update_request: I/O error, dev mmcblk0, sector 3633189 [ 34.488331] mmcblk0: error -110 transferring data, sector 3633190, nr 226, cmd response 0x900, card status 0x0 [ 34.498410] blk_update_request: I/O error, dev mmcblk0, sector 3633190 [ 38.572399] mmcblk0: error -110 transferring data, sector 3633191, nr 225, cmd response 0x900, card status 0x0 [ 38.582465] blk_update_request: I/O error, dev mmcblk0, sector 3633191 [ 42.656453] mmcblk0: error -110 transferring data, sector 3633192, nr 224, cmd response 0x900, card status 0x0 [ 42.666516] blk_update_request: I/O error, dev mmcblk0, sector 3633192 [ 46.740495] mmcblk0: error -110 transferring data, sector 3633193, nr 223, cmd response 0x900, card status 0x0 [ 46.750559] blk_update_request: I/O error, dev mmcblk0, sector 3633193 [ 50.824535] mmcblk0: error -110 transferring data, sector 3633194, nr 222, cmd response 0x900, card status 0x0 [ 50.834602] blk_update_request: I/O error, dev mmcblk0, sector 3633194 [ 54.908587] mmcblk0: error -110 transferring data, sector 3633195, nr 221, cmd response 0x900, card status 0x0 [ 54.918662] blk_update_request: I/O error, dev mmcblk0, sector 3633195 [ 58.992644] mmcblk0: error -110 transferring data, sector 3633196, nr 220, cmd response 0x900, card status 0x0 [ 59.002713] blk_update_request: I/O error, dev mmcblk0, sector 3633196 [ 63.076696] mmcblk0: error -110 transferring data, sector 3633197, nr 219, cmd response 0x900, card status 0x0 [ 63.086773] blk_update_request: I/O error, dev mmcblk0, sector 3633197 [ 67.160756] mmcblk0: error -110 transferring data, sector 3633198, nr 218, cmd response 0x900, card status 0x0 [ 67.170834] blk_update_request: I/O error, dev mmcblk0, sector 3633198 [ 71.244811] mmcblk0: error -110 transferring data, sector 3633199, nr 217, cmd response 0x900, card status 0x0 [ 71.254884] blk_update_request: I/O error, dev mmcblk0, sector 3633199 [ 75.328869] mmcblk0: error -110 transferring data, sector 3633200, nr 216, cmd response 0x900, card status 0x0 [ 75.338944] blk_update_request: I/O error, dev mmcblk0, sector 3633200 [ 79.412922] mmcblk0: error -110 transferring data, sector 3633201, nr 215, cmd response 0x900, card status 0x0 [ 79.422994] blk_update_request: I/O error, dev mmcblk0, sector 3633201
[PYBOOT] [cosmic 02:10]: Timed out waiting for "<type 'str'>":
[PYBOOT] [cosmic 02:11]: got exception: timeout ~$off
[PYBOOT] [cosmic 02:12]: Done. Board dalmore-arm-multi_lpae_defconfig failure log: -------------------------------------------------
[ 2.466544] Key type dns_resolver registered [ 2.472981] ThumbEE CPU extension supported. [ 2.477396] Registering SWP/SWPB emulation handler [ 2.508917] vdd-sys-5v0: supplied by vdd_ac_bat [ 2.516249] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 2.525593] vdd_hdmi_5v0: supplied by vdd-sys-5v0 [ 2.540810] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.547575] [drm] No driver support for vblank timestamp query. [ 2.564525] mmc1: new high speed MMC card at address 0001 [ 2.573621] mmcblk1: mmc1:0001 SEM32G 29.1 GiB [ 2.581795] mmcblk1boot0: mmc1:0001 SEM32G partition 1 4.00 MiB [ 2.591471] mmcblk1boot1: mmc1:0001 SEM32G partition 2 4.00 MiB [ 2.601217] mmcblk1rpmb: mmc1:0001 SEM32G partition 3 4.00 MiB [ 2.610853] mmcblk1: p1 [ 2.724599] Console: switching to colour frame buffer device 240x75 [ 2.811890] drm drm: fb0: frame buffer device [ 2.833783] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 2.844026] usb2_vbus: supplied by vdd-sys-5v0 [ 2.855737] tegra-ehci 7d008000.usb: EHCI Host Controller [ 2.861386] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 2.870102] tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 [ 2.883816] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 2.894117] hub 1-0:1.0: USB hub found [ 2.898112] hub 1-0:1.0: 1 port detected [ 2.908600] input: gpio-keys as /devices/soc0/gpio-keys/input/input0 [ 2.922861] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 2.984600] dvdd_ts: disabling [ 2.987700] usb1_vbus: disabling [ 2.991075] vdd_cam_1v8_reg: disabling [ 2.998393] Waiting for root device /dev/mmcblk0p1... [ 3.213837] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 4.192429] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f [ 65.272530] random: nonblocking pool is initialized
[PYBOOT] [dalmore 01:59]: Timed out waiting for "<type 'str'>":
[PYBOOT] [dalmore 02:00]: got exception: timeout ~$off
[PYBOOT] [dalmore 02:01]: Done. Board dalmore-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 2.480213] Key type dns_resolver registered [ 2.486622] ThumbEE CPU extension supported. [ 2.491038] Registering SWP/SWPB emulation handler [ 2.537284] vdd-sys-5v0: supplied by vdd_ac_bat [ 2.542699] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 2.551421] vdd_hdmi_5v0: supplied by vdd-sys-5v0 [ 2.567881] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.574805] [drm] No driver support for vblank timestamp query. [ 2.588268] mmc1: new high speed MMC card at address 0001 [ 2.596572] mmcblk1: mmc1:0001 SEM32G 29.1 GiB [ 2.603107] mmcblk1boot0: mmc1:0001 SEM32G partition 1 4.00 MiB [ 2.612697] mmcblk1boot1: mmc1:0001 SEM32G partition 2 4.00 MiB [ 2.621489] mmcblk1rpmb: mmc1:0001 SEM32G partition 3 4.00 MiB [ 2.631698] mmcblk1: p1 [ 2.754688] Console: switching to colour frame buffer device 240x75 [ 2.841639] drm drm: fb0: frame buffer device [ 2.859933] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 2.870068] usb2_vbus: supplied by vdd-sys-5v0 [ 2.880834] tegra-ehci 7d008000.usb: EHCI Host Controller [ 2.886425] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 2.895318] tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 [ 2.909947] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 2.920344] hub 1-0:1.0: USB hub found [ 2.924422] hub 1-0:1.0: 1 port detected [ 2.934434] input: gpio-keys as /devices/soc0/gpio-keys/input/input0 [ 2.948326] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 3.010208] dvdd_ts: disabling [ 3.013310] usb1_vbus: disabling [ 3.016664] vdd_cam_1v8_reg: disabling [ 3.024197] Waiting for root device /dev/mmcblk0p1... [ 3.234949] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 4.191713] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f [ 59.939856] random: nonblocking pool is initialized
[PYBOOT] [dalmore 01:54]: Timed out waiting for "<type 'str'>":
[PYBOOT] [dalmore 01:55]: got exception: timeout ~$off
[PYBOOT] [dalmore 01:56]: Done. Board dalmore-arm-tegra_defconfig failure log: -------------------------------------------------
[ 2.666816] Bluetooth: RFCOMM ver 1.11 [ 2.670745] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 2.676139] Bluetooth: BNEP socket layer initialized [ 2.681226] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 2.687224] Bluetooth: HIDP socket layer initialized [ 2.694184] Key type dns_resolver registered [ 2.703847] Registering SWP/SWPB emulation handler [ 2.737016] vdd-sys-5v0: supplied by vdd_ac_bat [ 2.743480] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 2.754418] vdd_hdmi_5v0: supplied by vdd-sys-5v0 [ 2.778223] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.785049] [drm] No driver support for vblank timestamp query. [ 2.962304] Console: switching to colour frame buffer device 240x75 [ 3.049528] drm drm: fb0: frame buffer device [ 3.079717] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.086946] usb2_vbus: supplied by vdd-sys-5v0 [ 3.096330] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.102132] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 3.111244] tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 [ 3.129848] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 3.143350] hub 1-0:1.0: USB hub found [ 3.147319] hub 1-0:1.0: 1 port detected [ 3.161561] input: gpio-keys as /devices/soc0/gpio-keys/input/input1 [ 3.175618] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:01 UTC (946684801) [ 3.263202] dvdd_ts: disabling [ 3.266356] usb1_vbus: disabling [ 3.269742] vdd_cam_1v8_reg: disabling [ 3.274412] ALSA device list: [ 3.277406] #0: NVIDIA Tegra Dalmore [ 3.283303] Waiting for root device /dev/mmcblk0p1... [ 3.469728] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 4.504390] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f [ 63.011460] random: nonblocking pool is initialized
[PYBOOT] [dalmore 01:45]: Timed out waiting for "<type 'str'>":
[PYBOOT] [dalmore 01:46]: got exception: timeout ~$off
[PYBOOT] [dalmore 01:47]: Done. Board odroidu3-arm-exynos_defconfig failure log: -------------------------------------------------
[ 1.688845] usbhid: USB HID core driver [ 1.697569] NET: Registered protocol family 10 [ 1.698192] sit: IPv6 over IPv4 tunneling driver [ 1.701397] NET: Registered protocol family 17 [ 1.705436] NET: Registered protocol family 15 [ 1.709887] Key type dns_resolver registered [ 1.714224] Registering SWP/SWPB emulation handler [ 1.725054] s3c-rtc 10070000.rtc: rtc disabled, re-enabling [ 1.725166] s3c-rtc 10070000.rtc: warning: invalid RTC value so initializing it [ 1.732492] s3c-rtc 10070000.rtc: rtc core: registered s3c as rtc1 [ 1.762936] max98090 1-0010: MAX98090 REVID=0x43 [ 1.765191] max98090 1-0010: use default 2.8v micbias [ 1.767886] mmc_host mmc1: Bus speed (slot 0) = 44000000Hz (slot req 52000000Hz, actual 44000000HZ div = 0) [ 1.772764] usb 1-3: New USB device found, idVendor=0424, idProduct=3503 [ 1.772769] usb 1-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.773262] hub 1-3:1.0: USB hub found [ 1.773415] hub 1-3:1.0: 3 ports detected [ 1.791577] asoc-simple-card sound: HiFi <-> 3830000.i2s mapping ok [ 1.794910] input: gpio_keys as /devices/platform/gpio_keys/input/input0 [ 1.811346] mmc_host mmc1: Bus speed (slot 0) = 73333333Hz (slot req 52000000Hz, actual 36666666HZ div = 1) [ 1.821147] mmc1: new DDR MMC card at address 0001 [ 1.826111] mmcblk1: mmc1:0001 008G92 7.28 GiB [ 1.830094] max77686-rtc max77686-rtc: setting system clock to 2000-01-01 01:00:20 UTC (946688420) [ 1.839341] mmcblk1boot0: mmc1:0001 008G92 partition 1 4.00 MiB [ 1.845216] mmcblk1boot1: mmc1:0001 008G92 partition 2 4.00 MiB [ 1.848341] VDD10_HDMI_1.0V: disabling [ 1.849004] vdd_g3d: disabling [ 1.849648] BUCK8_2.8V: disabling [ 1.8510d6] ALSA device list: [ 1.851051] #0: Odroid-U3 [ 1.866875] mmcblk1rpmb: mmc1:0001 008G92 partition 3 512 KiB [ 1.873487] mmcblk1: p1 p2 [ 1.877699] Waiting for root device /dev/mmcblk0p2...
[PYBOOT] [odroidu3 01:46]: Timed out waiting for "<type 'str'>":
[PYBOOT] [odroidu3 01:47]: got exception: timeout ~$off
[PYBOOT] [odroidu3 01:48]: Done. Board omap5uevm-arm-multi_lpae_defconfig failure log: -------------------------------------------------
[ 2.207289] 1f20: fa21200c c1301f50 fa212000 c0301798 c0308740 a0000013 ffffffff c1301f84 [ 2.215845] 1f40: c12075c0 c1302504 c140dee8 c030c494 00000001 00000000 ea000013 f0880000 [ 2.224401] 1f60: c1300000 c13024a4 00000000 00000000 c12075c0 c1302504 c140dee8 c130250c [ 2.232955] 1f80: 2ddc5000 c1301fa0 c032af10 c0308740 a0000013 ffffffff 00000051 c030873c [ 2.241507] 1fa0: c1300000 c0378200 c1301fb4 c1301fa8 00000000 ffffffff 00000000 c1100c4c [ 2.250057] 1fc0: ffffffff ffffffff 00000000 c1100684 00000000 c11a3a30 c14105d4 c1302480 [ 2.258611] 1fe0: c11a3a2c c1307c4c 8020406a 412fc0f2 00000000 8020807c 00000000 00000000 [ 2.267172] [<c03842e4>] (__irq_wake_thread) from [<c0384390>] (handle_irq_event_percpu+0x74/0x14c) [ 2.276635] [<c0384390>] (handle_irq_event_percpu) from [<c03844ac>] (handle_irq_event+0x44/0x68) [ 2.285920] [<c03844ac>] (handle_irq_event) from [<c03876e8>] (handle_fasteoi_irq+0xb4/0x194) [ 2.294839] [<c03876e8>] (handle_fasteoi_irq) from [<c0383a84>] (generic_handle_irq+0x24/0x34) [ 2.303847] [<c0383a84>] (generic_handle_irq) from [<c0383d34>] (__handle_domain_irq+0x5c/0xb4) [ 2.312948] [<c0383d34>] (__handle_domain_irq) from [<c0301798>] (gic_handle_irq+0x54/0x94) [ 2.321686] [<c0301798>] (gic_handle_irq) from [<c030c494>] (__irq_svc+0x54/0x70) [ 2.329515] Exception stack(0xc1301f50 to 0xc1301f98) [ 2.334795] 1f40: 00000001 00000000 ea000013 f0880000 [ 2.343354] 1f60: c1300000 c13024a4 00000000 00000000 c12075c0 c1302504 c140dee8 c130250c [ 2.351909] 1f80: 2ddc5000 c1301fa0 c032af10 c0308740 a0000013 ffffffff [ 2.358830] [<c030c494>] (__irq_svc) from [<c0308740>] (arch_cpu_idle+0x20/0x3c) [ 2.366573] [<c0308740>] (arch_cpu_idle) from [<c0378200>] (cpu_startup_entry+0x1bc/0x218) [ 2.375226] [<c0378200>] (cpu_startup_entry) from [<c1100c4c>] (start_kernel+0x370/0x37c) [ 2.383782] [<c1100c4c>] (start_kernel) from [<8020807c>] (0x8020807c) [ 2.390608] Code: e2811024 eb081b06 e3500000 18bd8070 (e5952070) [ 2.396982] ---[ end trace 90cc5891bd83366e ]--- [ 2.401805] Kernel panic - not syncing: Fatal exception in interrupt [ 2.408448] CPU1: stopping [ 2.411278] CPU: 1 PID: 0 Comm: swapper/1 Tainted: G D 4.6.0-rc7-00055-gc511462 #1 [ 2.420377] Hardware name: Generic OMAP5 (Flattened Device Tree) [ 2.426659] [<c031031c>] (unwind_backtrace) from [<c030b968>] (show_stack+0x10/0x14) [ 2.434762] [<c030b968>] (show_stack) from [<c058b994>] (dump_stack+0x88/0x9c) [ 2.442319] [<c058b994>] (dump_stack) from [<c030eac4>] (handle_IPI+0x16c/0x1[ 2.449511] Unable to handle kernel paging request at virtual address 0000f97c [ 2.449512] pgd = c0204000 [ 2.449515] [0000f97c] *pgd=00000000 [ 2.449517] Internal error: Oops: 5 [#2] SMP ARM [ 2.449520] Modules linked in: [ 2.449522] CPU: 1 PID: 0 Comm: swapper/1 Tainted: G D [PYBOOT] [omap5uevm 00:48]: got exception: panic ~$off
[PYBOOT] [omap5uevm 00:49]: Done. Board omap5uevm-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 2.226494] bde0: 00000002 00000000 00000000 7fffffff ee05be04 c0b52358 7fffffff ee05a000 [ 2.235059] be00: 00000000 c0b54d58 2ddd1000 ee06c000 eefd92c0 eefd92c0 2ddd1000 c12082c0 [ 2.243618] be20: eefd92c0 00000001 ee05be3c ee05beb0 ee655740 ee655749 c113ee10 c05961ac [ 2.252188] be40: 00000000 ffffff05 ffff0a00 c0ee0a5a ee06c000 c03636bc ee655740 c0ee0a58 [ 2.260762] be60: ee05befc ee655749 c0ee0a5a 00000002 ee05be88 c05964fc ffffff05 ffff0a00 [ 2.269317] be80: 00000009 ee655740 ffffff05 ffff0a00 00000000 ee05bef8 00000008 c0ee0a58 [ 2.277878] bea0: 00000009 ee655740 c05980cc 00000008 00000000 c0598004 ee05beb8 ee05beb8 [ 2.286442] bec0: 00000118 ee05bef8 c144fcf4 c1410000 c1410000 c1203224 c113ee10 00000000 [ 2.295001] bee0: 00000118 c05980cc c1306890 ee05bef8 c0301e20 c0ee0a58 c113ee10 ee05a000 [ 2.303558] bf00: 00000000 cccccccd 00000000 c0464e3c c0c0b400 ee132880 00000000 c133659c [ 2.312129] bf20: c101e854 c0c1ceac 00000118 c035b858 c0eca0f8 c101d274 00000000 00000007 [ 2.320688] bf40: 00000007 c0ee0748 c1336584 c1410000 c1410000 c1410000 c1410000 c1203224 [ 2.329246] bf60: c11a3838 c11a383c 00000118 c1100db0 00000007 00000007 00000000 c11005ac [ 2.337804] bf80: 00000000 00000000 c0b507cc 00000000 00000000 00000000 00000000 00000000 [ 2.346366] bfa0: 00000000 c0b507d4 00000000 c0307d38 00000000 00000000 00000000 00000000 [ 2.354932] bfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 2.363495] bfe0: 00000000 00000000 00000000 00000000 00000013 00000000 4998c0cd e9d998e8 [ 2.372068] [<c03ae634>] (get_symbol_pos) from [<c03aed08>] (kallsyms_lookup+0x40/0xbc) [ 2.380458] [<c03aed08>] (kallsyms_lookup) from [<c03aedb4>] (__sprint_symbol+0x30/0xcc) [ 2.388930] [<c03aedb4>] (__sprint_symbol) from [<c0593d90>] (symbol_string+0x44/0x80) [ 2.397222] [<c0593d90>] (symbol_string) from [<c05961ac>] (pointer+0x3d0/0x544) [ 2.404963] [<c05961ac>] (pointer) from [<c05964fc>] (vsnprintf+0x1dc/0x458) [ 2.412345] [<c05964fc>] (vsnprintf) from [<c0598004>] (kvasprintf+0x60/0x9c) [ 2.419818] [<c0598004>] (kvasprintf) from [<c05980cc>] (kasprintf+0x1c/0x2c) [ 2.427293] [<c05980cc>] (kasprintf) from [<c0301e20>] (do_one_initcall+0x34/0x1d4) [ 2.435318] [<c0301e20>] (do_one_initcall) from [<c1100db0>] (kernel_init_freeable+0x158/0x1e8) [ 2.444443] [<c1100db0>] (kernel_init_freeable) from [<c0b507d4>] (kernel_init+0x8/0x114) [ 2.452998] [<c0b507d4>] (kernel_init) from [<c0307d38>] (ret_from_fork+0x14/0x3c) [ 2.460926] Code: e5935000 e1a04007 ea000005 e08c30a3 (e796e103) [ 2.467307] ---[ end trace e612307d9208df5e ]--- [ 2.472156] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b [ 2.472156] [ 3.458683] SMP: failed to stop secondary CPUs [ 3.463338] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b [ 3.463338]
[PYBOOT] [omap5uevm 00:46]: got exception: panic ~$off
[PYBOOT] [omap5uevm 00:48]: Done. Board seaboard-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.657238] vdd_ldo7,avdd_hdmi,vdd_fuse: supplied by vdd_sm2,vin_ldo* [ 1.663979] mmc2: switch to bus width 8 failed [ 1.669303] mmc2: switch to bus width 4 failed [ 1.673774] mmc2: new high speed MMC card at address 0001 [ 1.674537] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 1.674569] tegra-ehci c5000000.usb: EHCI Host Controller [ 1.674601] tegra-ehci c5000000.usb: new USB bus registered, assigned bus number 3 [ 1.674909] tegra-ehci c5000000.usb: irq 287, io mem 0xc5000000 [ 1.683585] tegra-ehci c5000000.usb: USB 2.0 started, EHCI 1.00 [ 1.707303] hub 3-0:1.0: USB hub found [ 1.707348] hub 3-0:1.0: 1 port detected [ 1.721079] mmcblk2: mmc2:0001 MMC08G 7.46 GiB [ 1.727070] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.733724] [drm] No driver support for vblank timestamp query. [ 1.733811] mmcblk2boot0: mmc2:0001 MMC08G partition 1 512 KiB [ 1.734079] mmcblk2boot1: mmc2:0001 MMC08G partition 2 512 KiB [ 1.746146] mmcblk2: p3 [ 1.777547] mmc0: queuing unknown CIS tuple 0x80 (50 bytes) [ 1.813060] mmc0: queuing unknown CIS tuple 0x80 (7 bytes) [ 1.815936] mmc0: queuing unknown CIS tuple 0x80 (7 bytes) [ 1.823274] mmc0: queuing unknown CIS tuple 0x80 (19 bytes) [ 1.840836] Console: switching to colour frame buffer device 170x48 [ 1.880605] drm drm: fb0: frame buffer device [ 1.881503] mmc0: queuing unknown CIS tuple 0x02 (1 bytes) [ 1.885813] mmc0: new SDIO card at address 0001 [ 1.908564] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 1.915368] input: gpio-keys as /devices/soc0/gpio-keys/input/input2 [ 1.922448] tps6586x-rtc tps6586x-rtc: setting system clock to 2009-01-01 00:00:00 UTC (1230768000) [ 1.936644] vdd_1v5: disabling [ 1.939726] vdd_1v2: disabling [ 2.578149] asix 2-1:1.0 eth0: register 'asix' at usb-c5008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, c0:c1:c0:13:08:60 [ 2.589554] Waiting for root device /dev/mmcblk0p3... [ 58.399233] random: nonblocking pool is initialized
[PYBOOT] [seaboard 01:50]: Timed out waiting for "<type 'str'>":
[PYBOOT] [seaboard 01:51]: got exception: timeout ~$off
[PYBOOT] [seaboard 01:52]: Done. Board seaboard-arm-tegra_defconfig failure log: -------------------------------------------------
[ 1.668200] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 1.673564] Bluetooth: BNEP socket layer initialized [ 1.678531] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 1.684485] Bluetooth: HIDP socket layer initialized [ 1.690048] Key type dns_resolver registered [ 1.695575] Registering SWP/SWPB emulation handler [ 1.711282] tegra-dc 54200000.dc: failed to probe RGB output: -517 [ 1.718079] VDDIO_HDMI: supplied by vdd_5v0 [ 1.722582] vdd_sys: supplied by vdd_5v0 [ 1.726608] vdd_sm2,vin_ldo*: supplied by vdd_sys [ 1.731623] vdd_ldo8,avdd_hdmi_pll: supplied by vdd_sm2,vin_ldo* [ 1.738189] vdd_ldo7,avdd_hdmi,vdd_fuse: supplied by vdd_sm2,vin_ldo* [ 1.748745] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 1.755277] tegra-ehci c5000000.usb: EHCI Host Controller [ 1.760730] tegra-ehci c5000000.usb: new USB bus registered, assigned bus number 3 [ 1.768813] tegra-ehci c5000000.usb: irq 287, io mem 0xc5000000 [ 1.791523] tegra-ehci c5000000.usb: USB 2.0 started, EHCI 1.00 [ 1.800559] hub 3-0:1.0: USB hub found [ 1.804481] hub 3-0:1.0: 1 port detected [ 1.817473] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.824140] [drm] No driver support for vblank timestamp query. [ 1.900410] Console: switching to colour frame buffer device 170x48 [ 1.924144] drm drm: fb0: frame buffer device [ 1.951529] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 1.959199] input: gpio-keys as /devices/soc0/gpio-keys/input/input4 [ 1.967135] tps6586x-rtc tps6586x-rtc: setting system clock to 2009-01-01 00:00:00 UTC (1230768000) [ 1.989966] vdd_1v5: disabling [ 1.993050] vdd_1v2: disabling [ 1.996262] ALSA device list: [ 1.999233] #0: NVIDIA Tegra Seaboard [ 2.312436] asix 2-1:1.0 eth0: register 'asix' at usb-c5008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, c0:c1:c0:13:08:60 [ 2.323694] Waiting for root device /dev/mmcblk0p3... [ 59.761413] random: nonblocking pool is initialized
[PYBOOT] [seaboard 01:47]: Timed out waiting for "<type 'str'>":
[PYBOOT] [seaboard 01:48]: got exception: timeout ~$off
[PYBOOT] [seaboard 01:49]: Done. Board snowball-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.917053] ledtrig-cpu: registered to indicate activity on CPUs [ 1.923553] usbcore: registered new interface driver usbhid [ 1.929138] usbhid: USB HID core driver [ 1.938568] NET: Registered protocol family 10 [ 1.944152] sit: IPv6 over IPv4 tunneling driver [ 1.949432] NET: Registered protocol family 17 [ 1.953918] can: controller area network core (rev 20120528 abi 9) [ 1.960174] NET: Registered protocol family 29 [ 1.964660] can: raw protocol (rev 20120528) [ 1.968933] can: broadcast manager protocol (rev 20120528 t) [ 1.974639] can: netlink gateway (rev 20130117) max_hops=1 [ 1.980682] Key type dns_resolver registered [ 1.985168] ThumbEE CPU extension supported. [ 1.989471] Registering SWP/SWPB emulation handler [ 1.998931] input: gpio_keys as /devices/soc0/gpio_keys/input/input0 [ 2.005706] rtc-pl031 80154000.rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 2.014892] thermal cooling_device0: thermal-cpufreq-0 bind to 0: 0-succeed [ 2.021911] thermal cooling_device0: thermal-cpufreq-0 bind to 1: 0-succeed [ 2.028930] thermal cooling_device0: thermal-cpufreq-0 bind to 2: 0-succeed [ 2.035919] db8500-cpufreq-cooling soc:cpufreq-cooling: Cooling device registered: thermal-cpufreq-0 [ 2.049285] db8500-esram12: disabling [ 2.053009] db8500-esram34: disabling [ 2.056976] V-CSI/DSI: disabling [ 2.060333] mmci-reg: disabling [ 2.064086] uart-pl011 80007000.uart: DMA channel TX dma0chan20 [ 2.070068] mmc3: new high speed MMC card at address 0001 [ 2.070068] uart-pl011 80007000.uart: DMA channel RX dma0chan21 [ 2.081604] Waiting for root device /dev/mmcblk0p4... [ 2.086914] mmcblk3: mmc3:0001 3.53 GiB [ 2.091125] mmcblk3boot0: mmc3:0001 partition 1 2.00 MiB [ 2.096740] mmcblk3boot1: mmc3:0001 partition 2 2.00 MiB [ 2.102416] mmcblk3rpmb: mmc3:0001 partition 3 128 KiB [ 2.108917] mmcblk3: p1 p2 p3 p4
[PYBOOT] [snowball 02:09]: Timed out waiting for "<type 'str'>":
[PYBOOT] [snowball 02:10]: got exception: timeout ~$off
[PYBOOT] [snowball 02:11]: Done. Board snowball-arm-u8500_defconfig failure log: -------------------------------------------------
[ 2.669250] iio iio:device1: registered pressure sensor lps001wp [ 2.675933] coresight-tpiu 80190000.tpiu: TPIU initialized [ 2.682159] coresight-etb10 801a4000.etb: ETB initialized [ 2.688018] coresight-funnel 801a6000.funnel: FUNNEL initialized [ 2.694549] coresight-replicator soc:replicator: REPLICATOR initialized [ 2.710083] ux500-msp-i2s ux500-msp-i2s.1: Failed to get DMA channel capabilities, falling back to period counting: -6 [ 2.720794] snd-soc-mop500 snd-soc-mop500.0: ab8500-codec-dai.0 <-> ux500-msp-i2s.1 mapping ok [ 2.730773] ux500-msp-i2s ux500-msp-i2s.3: Failed to get DMA channel capabilities, falling back to period counting: -6 [ 2.741455] snd-soc-mop500 snd-soc-mop500.0: ab8500-codec-dai.1 <-> ux500-msp-i2s.3 mapping ok [ 2.765808] NET: Registered protocol family 10 [ 2.771270] sit: IPv6 over IPv4 tunneling driver [ 2.776794] NET: Registered protocol family 17 [ 2.781311] NET: Registered protocol family 35 [ 2.785827] NET: Registered protocol family 37 [ 2.790405] Registering SWP/SWPB emulation handler [ 2.807006] coresight-etm3x 801ae000.ptm: PTM 1.0 initialized [ 2.813842] coresight-etm3x 801af000.ptm: PTM 1.0 initialized [ 2.821166] input: gpio_keys as /devices/soc0/gpio_keys/input/input1 [ 2.828613] ab8500-rtc ab8500-rtc.0: setting system clock to 2000-04-21 17:14:27 UTC (956337267) [ 2.837829] thermal cooling_device0: thermal-cpufreq-0 bind to 0: 0-succeed [ 2.844848] thermal cooling_device0: thermal-cpufreq-0 bind to 1: 0-succeed [ 2.851867] thermal cooling_device0: thermal-cpufreq-0 bind to 2: 0-succeed [ 2.858825] db8500-cpufreq-cooling soc:cpufreq-cooling: Cooling device registered: thermal-cpufreq-0 [ 2.872314] db8500-esram12: disabling [ 2.876098] db8500-esram34: disabling [ 2.880065] V-CSI/DSI: disabling [ 2.883331] mmci-reg: disabling [ 2.886627] ALSA device list: [ 2.889617] #0: MOP500-card [ 2.892974] uart-pl011 80007000.uart: DMA channel TX dma0chan24 [ 2.898925] uart-pl011 80007000.uart: DMA channel RX dma0chan25 [ 2.905120] Waiting for root device /dev/mmcblk0p4... [ 79.480224] random: nonblocking pool is initialized
[PYBOOT] [snowball 01:55]: Timed out waiting for "<type 'str'>":
[PYBOOT] [snowball 01:56]: got exception: timeout ~$off
[PYBOOT] [snowball 01:57]: Done. Board wandboard-arm-imx_v6_v7_defconfig failure log: -------------------------------------------------
[ 19.943243] mmcblk0: error -110 sending status command, retrying [ 19.951709] mmcblk0: error -110 sending status command, retrying [ 19.960166] mmcblk0: error -110 sending status command, aborting INIT: cannot execute "/sbin/getty" INIT: INIT: cannot execute "/sbin/getty"cannot execute "/sbin/getty"
INIT: cannot execute[ 19.977930] mmcblk0: error -110 sending status command, retrying "/sbin/getty" [ 19.986867] mmcblk0: error -110 sending status command, retrying [ 19.995341] mmcblk0: error -110 sending status command, aborting [ 20.006405] mmcblk0: error -110 sending status command, retrying [ 20.014928] mmcblk0: error -110 sending status command, retrying [ 20.023361] mmcblk0: error -110 sending status command, aborting INIT: cannot execute "/sbin/getty" I[ 20.034509] mmcblk0: error -110 sending status command, retrying NIT: Id "3" respawning too fast: [ 20.043329] mmcblk0: error -110 sending status command, retrying disabled for 5 minutes [ 20.052201] mmcblk0: error -110 sending status command, aborting INIT: INIT: cannot execute "/sbin/gett[ 20.063462] mmcblk0: error -110 sending status command, retrying y"cannot execute "/sbin/getty" [ 20.072340] mmcblk0: error -110 sending status command, retrying
INIT: Id "4" respawning too f[ 20.081117] mmcblk0: error -110 sending status command, aborting ast: disabled for 5 minutes [ 20.092674] mmcblk0: error -110 sending status command, retrying [ 20.101143] mmcblk0: error -110 sending status command, retrying [ 20.109601] mmcblk0: error -110 sending status command, aborting INIT: cannot execute "/sbin/getty" INIT: INIT: cannot execute "/sbin/getty"Id "S1" respawning too fast: disabled for 5 minutes
INIT: Id "5" respawning too fast: disabled for 5 minutes INIT: no more processes left in this runlevel [ 56.755201] random: nonblocking pool is initialized
[PYBOOT] [wandboard 02:55]: Timed out waiting for "<type 'str'>":
[PYBOOT] [wandboard 02:56]: got exception: timeout ~$off
[PYBOOT] [wandboard 02:58]: Done.