arndale : FAILED 0:52.00 bbb : FAILED 1:21.92 beaver : FAILED 0:46.09 multi-beaver : FAILED 0:45.88 cubie2 : FAILED 0:58.59 cubie : FAILED 0:50.34 cubox : OFFLINE 0:30.47 panda : FAILED 1:06.53 multi-panda : FAILED 0:42.02 sama5 : FAILED 1:01.79 snowball : OFFLINE 0:30.47 multi-snowball : FAILED 0:39.65 multi-trimslice : FAILED 1:01.08 wandboard : FAILED 0:56.03 multi-wandboard : FAILED 0:39.71
Board legend:
Board : System SoC Defconfig
arndale : InSignal ArndaleBoard Samsung Exynos 5250 exynos_defconfig bbb : BeagleBone Black TI Sitara AM3359 omap2plus_defconfig beaver : Nvidia Beaver Nvidia Tegra 30 tegra_defconfig multi-beaver : multi_v7_defconfig cubie : Cubieboard Allwinner A10 multi_v7_defconfig cubie2 : Cubieboard 2 Allwinner A20 multi_v7_defconfig cubox : SolidRun Cubox Marvell 88AP510 dove_defconfig multi-trimslice : CompuLab TrimSlice Nvidia Tegra 20 multi_v7_defconfig panda : TI PandaBoard ES TI OMAP4460 omap2plus_defconfig multi-panda : multi_v7_defconfig sama5 : Atmel SAMA5 devboard Atmel SAMA5D35 sama5_defconfig snowball : CALAO Snowball ST-Ericsson A9500 u8500_defconfig multi-snowball : multi_v7_defconfig wandboard : Wandboard Freescale i.MX6 Quad imx_v6_v7_defconfig multi-wandboard : multi_v7_defconfig
Last entries of failed logs below:
========================================================================
Board arndale failure log: -------------------------------------------------
setenv autoboot no ARNDALE5250 # printenv printenv autoboot=no autoload=no baudrate=115200 bootargs=console=ttySAC2,115200n8 earlyprintk debug root=/dev/mmcblk0p1 rootwait rw bootcmd=run net_boot bootdelay=3 bootfile=queue/v3.4.70-18-g8a29189/uImage.exynos dnsip=172.16.1.1 ethact=asx0 gatewayip=172.16.1.1 initrd_high=0x7fffffff ipaddr=172.16.1.160 legacy=usb start ; bootp ; tftpboot 0x40800000 172.16.1.7:/srv/tftp/uImage.arndale && bootm 0x40800000 net_boot=bootp ; tftpboot 0x40800000 172.16.1.4:/srv/tftp/uImage.exynos && tftpboot 0x407c0000 172.16.1.4:/srv/tftp/exynos5250-arndale.dtb && bootm 0x40800000 - 0x407c0000 netmask=255.255.255.0 preboot=usb start serverip=172.16.1.7 stderr=serial stdin=serial stdout=serial usbethaddr=00:40:5c:26:0a:5b
Environment size: 747/16380 bytes ARNDALE5250 # printenv bootargs printenv bootargs bootargs=console=ttySAC2,115200n8 earlyprintk debug root=/dev/mmcblk0p1 rootwait rw ARNDALE5250 # tftpboot 0x40800000 172.16.1.4:/srv/tftp/queue/v3.4.70-18-g8a29189/uImage.exynos tftpboot 0x40800000 172.16.1.4:/srv/tftp/queue/v3.4.70-18-g8a29189/uImage.exynos Waiting for Ethernet connection... done. Using asx0 device TFTP from server 172.16.1.4; our IP address is 172.16.1.160 Filename '/srv/tftp/queue/v3.4.70-18-g8a29189/uImage.exynos'. Load address: 0x40800000 Loading: * TFTP error: 'File not found' (1) Not retrying... ARNDALE5250 # ~$off
========================================================================
Board bbb failure log: -------------------------------------------------
ver=U-Boot 2013.04-00017-g5c4fa11 (May 03 2013 - 10:48:32)
Environment size: 4202/131068 bytes U-Boot# setenv bootargs 'console=ttyO0,115200 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/bbb ip=dhcp' setenv bootargs 'console=ttyO0,115200 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/bbb ip=dhcp' U-Boot# printenv bootargs printenv bootargs bootargs=console=ttyO0,115200 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/bbb ip=dhcp U-Boot# tftpboot 0x80000000 172.16.1.4:/srv/tftp/queue/v3.4.70-18-g8a29189/uImage.omap tftpboot 0x80000000 172.16.1.4:/srv/tftp/queue/v3.4.70-18-g8a29189/uImage.omap link up on port 0, speed 100, full duplex Using cpsw device TFTP from server 172.16.1.4; our IP address is 172.16.1.109 Filename '/srv/tftp/queue/v3.4.70-18-g8a29189/uImage.omap'. Load address: 0x80000000 Loading: *################################T ################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ############ 321.3 KiB/s done Bytes transferred = 3385640 (33a928 hex) U-Boot# tftpboot 0x81000000 172.16.1.4:/srv/tftp/queue/v3.4.70-18-g8a29189/am335x-boneblack.dtb tftpboot 0x81000000 172.16.1.4:/srv/tftp/queue/v3.4.70-18-g8a29189/am335x-boneblack.dtb link up on port 0, speed 100, full duplex Using cpsw device TFTP from server 172.16.1.4; our IP address is 172.16.1.109 Filename '/srv/tftp/queue/v3.4.70-18-g8a29189/am335x-boneblack.dtb'. Load address: 0x81000000 Loading: * TFTP error: 'File not found' (1) Not retrying... U-Boot# ~$off
========================================================================
Board beaver failure log: -------------------------------------------------
stdin=serial stdout=serial usb_boot=setenv devtype usb; run usb_init; if usb dev ${devnum}; then run scan_boot; fi usb_init=if ${usb_need_init}; then set usb_need_init false; usb start 0; fi usbethaddr=58:6d:8f:50:ba:18 vendor=nvidia
Environment size: 1598/8188 bytes Tegra30 (Beaver) # printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 earlyprintk debug root=/dev/mmcblk0p1 rootwait Tegra30 (Beaver) # tftpboot 0x82000000 172.16.1.4:/srv/tftp/queue/v3.4.70-18-g8a29189/uImage.tegra30 tftpboot 0x82000000 172.16.1.4:/srv/tftp/queue/v3.4.70-18-g8a29189/uImage.tegra30 Using asx0 device TFTP from server 172.16.1.4; our IP address is 172.16.1.175 Filename '/srv/tftp/queue/v3.4.70-18-g8a29189/uImage.tegra30'. Load address: 0x82000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ######################################### 1.9 MiB/s done Bytes transferred = 2868776 (2bc628 hex) Tegra30 (Beaver) # tftpboot 0x83000000 172.16.1.4:/srv/tftp/queue/v3.4.70-18-g8a29189/tegra30-beaver.dtb tftpboot 0x83000000 172.16.1.4:/srv/tftp/queue/v3.4.70-18-g8a29189/tegra30-beaver.dtb Using asx0 device TFTP from server 172.16.1.4; our IP address is 172.16.1.175 Filename '/srv/tftp/queue/v3.4.70-18-g8a29189/tegra30-beaver.dtb'. Load address: 0x83000000 Loading: * TFTP error: 'File not found' (1) Not retrying... Tegra30 (Beaver) # node: beaver status: on ~$off
========================================================================
Board cubie2 failure log: -------------------------------------------------
bootenv=uEnv.txt bootfile=queue/v3.4.70-18-g8a29189/uImage.multi-1g bootscr=boot.scr console=ttyS0,115200 device=mmc dnsip=172.16.1.1 ethact=emac ethaddr=08:00:08:1e:2f:64 gatewayip=172.16.1.1 ipaddr=172.16.1.154 kernel=uImage loadbootenv=fatload $device $partition $scriptaddr ${bootenv} || ext2load $device $partition $scriptaddr boot/${bootenv} || ext2load $device $partition $scriptaddr ${bootenv} loadbootscr=fatload $device $partition $scriptaddr ${bootscr} || ext2load $device $partition $scriptaddr boot/${bootscr} ||ext2load $device $partition $scriptaddr ${bootscr} loadkernel=if bootpath=/boot/ && ext2load $device $partition 0x43000000 ${bootpath}script.bin && ext2load $device $partition 0x48000000 ${bootpath}${kernel};then true; elif bootpath=/ && fatload $device $partition 0x43000000 script.bin && fatload $device $partition 0x48000000 ${kernel};then true; elif bootpath=/ && ext2load $device $partition 0x43000000 ${bootpath}script.bin && ext2load $device $partition 0x48000000 ${bootpath}${kernel};then true; else false;fi loglevel=8 netmask=255.255.255.0 panicarg=panic=10 partition=0:1 scriptaddr=0x44000000 serverip=172.16.1.4 setargs=if test -z \"$root\"; then if test \"$bootpath\" = "boot/"; then root="/dev/mmcblk0p1 rootwait"; else root="/dev/mmcblk0p2 rootwait"; fi; fi; setenv bootargs console=${console} root=${root} loglevel=${loglevel} ${panicarg} ${extraargs} stderr=serial stdin=serial stdout=serial
Environment size: 2098/131068 bytes sun7i# printenv bootargs printenv bootargs bootargs=console=ttyS0,115200n8 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/cubie2 ip=dhcp sun7i# tftpboot 0x41000000 172.16.1.4:/srv/tftp/queue/v3.4.70-18-g8a29189/uImage.multi-1g tftpboot 0x41000000 172.16.1.4:/srv/tftp/queue/v3.4.70-18-g8a29189/uImage.multi-1g Using emac device TFTP from server 172.16.1.4; our IP address is 172.16.1.154 Filename '/srv/tftp/queue/v3.4.70-18-g8a29189/uImage.multi-1g'. Load address: 0x41000000 Loading: * TFTP error: 'File not found' (1) Not retrying... sun7i# node: cubie2 status: on ~$off
========================================================================
Board cubie failure log: -------------------------------------------------
bootenv=uEnv.txt bootfile=queue/v3.4.70-18-g8a29189/uImage.multi-1g bootscr=boot.scr console=ttyS0,115200 device=mmc dnsip=172.16.1.1 ethact=emac ethaddr=08:00:08:1e:2f:44 gatewayip=172.16.1.1 ipaddr=172.16.1.138 kernel=uImage loadbootenv=fatload $device $partition $scriptaddr ${bootenv} || ext2load $device $partition $scriptaddr boot/${bootenv} || ext2load $device $partition $scriptaddr ${bootenv} loadbootscr=fatload $device $partition $scriptaddr ${bootscr} || ext2load $device $partition $scriptaddr boot/${bootscr} ||ext2load $device $partition $scriptaddr ${bootscr} loadkernel=if bootpath=/boot/ && ext2load $device $partition 0x43000000 ${bootpath}script.bin && ext2load $device $partition 0x48000000 ${bootpath}${kernel};then true; elif bootpath=/ && fatload $device $partition 0x43000000 script.bin && fatload $device $partition 0x48000000 ${kernel};then true; elif bootpath=/ && ext2load $device $partition 0x43000000 ${bootpath}script.bin && ext2load $device $partition 0x48000000 ${bootpath}${kernel};then true; else false;fi loglevel=8 netmask=255.255.255.0 panicarg=panic=10 partition=0:1 scriptaddr=0x44000000 serverip=172.16.1.4 setargs=if test -z \"$root\"; then if test \"$bootpath\" = "boot/"; then root="/dev/mmcblk0p1 rootwait"; else root="/dev/mmcblk0p2 rootwait"; fi; fi; setenv bootargs console=${console} root=${root} loglevel=${loglevel} ${panicarg} ${extraargs} stderr=serial stdin=serial stdout=serial
Environment size: 2097/131068 bytes sun4i#printenv bootargs printenv bootargs bootargs=console=ttyS0,115200n8 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/cubie ip=dhcp sun4i#tftpboot 0x41000000 172.16.1.4:/srv/tftp/queue/v3.4.70-18-g8a29189/uImage.multi-1g tftpboot 0x41000000 172.16.1.4:/srv/tftp/queue/v3.4.70-18-g8a29189/uImage.multi-1g Using emac device TFTP from server 172.16.1.4; our IP address is 172.16.1.138 Filename '/srv/tftp/queue/v3.4.70-18-g8a29189/uImage.multi-1g'. Load address: 0x41000000 Loading: * TFTP error: 'File not found' (1) Not retrying... sun4i#node: cubie status: on ~$off
========================================================================
Board multi-beaver failure log: -------------------------------------------------
dnsip=172.16.1.1 ethact=asx0 fdt_addr_r=0x82000000 gatewayip=172.16.1.1 initrd_high=0xffffffff ipaddr=172.16.1.175 kernel_addr_r=0x81000000 loadaddr=0x80408000 mmc_boot=setenv devtype mmc; if mmc dev ${devnum}; then run scan_boot; fi netmask=255.255.255.0 ramdisk_addr_r=0x82100000 rootpart=1 scan_boot=echo Scanning ${devtype} ${devnum}...; for prefix in ${boot_prefixes}; do for script in ${boot_scripts}; do run script_boot; done; done; script_boot=if load ${devtype} ${devnum}:${rootpart} ${scriptaddr} ${prefix}${script}; then echo ${script} found! Executing ...;source ${scriptaddr};fi; scriptaddr=0x90000000 serverip=172.16.1.7 soc=tegra30 stderr=serial stdin=serial stdout=serial usb_boot=setenv devtype usb; run usb_init; if usb dev ${devnum}; then run scan_boot; fi usb_init=if ${usb_need_init}; then set usb_need_init false; usb start 0; fi usbethaddr=58:6d:8f:50:ba:18 vendor=nvidia
Environment size: 1599/8188 bytes Tegra30 (Beaver) # printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 earlyprintk debug root=/dev/mmcblk0p1 rootwait Tegra30 (Beaver) # tftpboot 0x82000000 172.16.1.4:/srv/tftp/queue/v3.4.70-18-g8a29189/uImage.multi-2g tftpboot 0x82000000 172.16.1.4:/srv/tftp/queue/v3.4.70-18-g8a29189/uImage.multi-2g Using asx0 device TFTP from server 172.16.1.4; our IP address is 172.16.1.175 Filename '/srv/tftp/queue/v3.4.70-18-g8a29189/uImage.multi-2g'. Load address: 0x82000000 Loading: * TFTP error: 'File not found' (1) Not retrying... Tegra30 (Beaver) # node: beaver status: on ~$off
========================================================================
Board multi-panda failure log: -------------------------------------------------
setenv autoboot no Panda # printenv printenv autoboot=no autoload=no baudrate=115200 bootargs=console=ttyO2,115200 root=/dev/mmcblk0p2 rootwait debug earlyprintk bootcmd=run usb_boot ; run legacy ; run local bootdelay=1 bootfile=queue/v3.4.70-18-g8a29189/uImage.multi-2g console=ttyO2,115200n8 ethact=sms0 fdt_high=0xffffffff gatewayip=172.16.1.1 hostname=panda-es ipaddr=172.16.1.182 legacy=usb start ; bootp ; tftpboot 0x80000000 172.16.1.7:/srv/tftp/uImage.panda && bootm 0x80000000 loadaddr=0x80000000 local=mmc rescan 0 ; fatload mmc 0:1 0x80000000 uImage && bootm 0x80000000 netmask=255.255.255.0 serverip=172.16.1.7 usb_boot=usb start ; bootp ; tftpboot 0x80000000 172.16.1.7:/srv/tftp/uImage.panda && tftp 0x81000000 172.16.1.7:/srv/tftp/omap4-panda.dtb && bootm 0x80000000 - 0x81000000 usbethaddr=2E:60:67:E0:49:01
Environment size: 820/131068 bytes Panda # printenv bootargs printenv bootargs bootargs=console=ttyO2,115200 root=/dev/mmcblk0p2 rootwait debug earlyprintk Panda # tftpboot 0x80000000 172.16.1.4:/srv/tftp/queue/v3.4.70-18-g8a29189/uImage.multi-2g tftpboot 0x80000000 172.16.1.4:/srv/tftp/queue/v3.4.70-18-g8a29189/uImage.multi-2g Waiting for Ethernet connection... node: panda-es status: on done. Using sms0 device TFTP from server 172.16.1.4; our IP address is 172.16.1.182 Filename '/srv/tftp/queue/v3.4.70-18-g8a29189/uImage.multi-2g'. Load address: 0x80000000 Loading: * TFTP error: 'File not found' (1) Not retrying... Panda # ~$off
========================================================================
Board multi-snowball failure log: -------------------------------------------------
emmcargs=setenv bootargs ${bootargs} root=/dev/mmcblk0p3 rootwait addcons=setenv bootargs ${bootargs} console=${console} emmcboot=echo Booting from eMMC ...; run commonargs emmcargs memargs; bootm ${loadaddr} mmcargs=setenv bootargs ${bootargs} root=/dev/mmcblk1p2 rootwait mmcboot=echo Booting from external MMC ...; run commonargs mmcargs memargs; bootm ${loadaddr} ethact=smc911x-0 bootdelay=5 bootargs=console=ttyAMA2,115200 root=/dev/mmcblk0p4 rootwait rw debug earlyprintk ethaddr=08:00:08:1e:0f:44 stdin=serial stdout=serial stderr=serial board_id=1 startup_graphics=0 logo=0 crashkernel=crashkernel=1M@0x5600000 autoload=no netmask=255.255.255.0 ipaddr=172.16.1.122 serverip=172.16.1.7 bootfile=queue/v3.4.70-18-g8a29189/uImage.multi-snowball autoboot=no
Environment size: 1705/4092 bytes U8500 $ printenv bootargs printenv bootargs bootargs=console=ttyAMA2,115200 root=/dev/mmcblk0p4 rootwait rw debug earlyprintk U8500 $ tftpboot 0x100000 172.16.1.4:/srv/tftp/queue/v3.4.70-18-g8a29189/uImage.multi-snowball tftpboot 0x100000 172.16.1.4:/srv/tftp/queue/v3.4.70-18-g8a29189/uImage.multi-snowball smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC 08:00:08:1e:0f:44 Using smc911x-0 device TFTP from server 172.16.1.4; our IP address is 172.16.1.122 Filename '/srv/tftp/queue/v3.4.70-18-g8a29189/uImage.multi-snowball'. Load address: 0x100000 Loading: * TFTP error: 'File not found' (1) Not retrying... U8500 $ ~$off
========================================================================
Board multi-trimslice failure log: -------------------------------------------------
DHCP client bound to address 172.16.1.135 TrimSlice # setenv bootfile queue/v3.4.70-18-g8a29189/uImage.multi-trimslice setenv bootfile queue/v3.4.70-18-g8a29189/uImage.multi-trimslice TrimSlice # setenv autoboot no setenv autoboot no TrimSlice # printenv printenv bootdelay=5 baudrate=115200 loadaddr=0x408000 stdin=serial,usbkbd stdout=serial,lcd stderr=serial,lcd console=ttyS0,115200n8 ethact=RTL8169#0 gateway=172.16.1.1 bootcmd=none bootargs=console=ttyS0,115200 root=/dev/sda1 rootwait rw autoload=no netmask=255.255.255.0 ipaddr=172.16.1.135 serverip=172.16.1.7 bootfile=queue/v3.4.70-18-g8a29189/uImage.multi-trimslice autoboot=no
Environment size: 375/65532 bytes TrimSlice # printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 root=/dev/sda1 rootwait rw TrimSlice # tftpboot 0x800000 172.16.1.4:/srv/tftp/queue/v3.4.70-18-g8a29189/uImage.multi-trimslice tftpboot 0x800000 172.16.1.4:/srv/tftp/queue/v3.4.70-18-g8a29189/uImage.multi-trimslice Using RTL8169#0 device TFTP from server 172.16.1.4; our IP address is 172.16.1.135 Filename '/srv/tftp/queue/v3.4.70-18-g8a29189/uImage.multi-trimslice'. Load address: 0x800000 Loading: * TFTP error: 'File not found' (1) Not retrying... TrimSlice # node: trimslice status: on ~$off
========================================================================
Board multi-wandboard failure log: -------------------------------------------------
gatewayip=172.16.1.1 importbootenv=echo Importing environment from mmc (uEnv.txt)...; env import -t $loadaddr $filesize initrd_high=0xffffffff ip_dyn=yes ipaddr=172.16.1.155 loadaddr=0x12000000 loadbootenv=load mmc ${mmcdev}:${mmcpart} ${loadaddr} uEnv.txt loadbootscript=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script}; loadfdt=load mmc ${mmcdev}:${mmcpart} ${fdt_addr} /dtbs/${fdt_file} loaduimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${uimage} loadzimage=load mmc ${mmcdev}:${mmcpart} ${loadaddr} zImage mmcargs=setenv bootargs console=${console},${baudrate} ${optargs} root=${mmcroot} rootfstype=${mmcrootfstype} video=${video} mmcboot=echo Booting from mmc ...; run mmcargs; if test ${boot_fdt} = yes || test ${boot_fdt} = try; then if run loadfdt; then bootz ${loadaddr} - ${fdt_addr}; else if test ${boot_fdt} = try; then bootz ${loadaddr}; else echo WARN: Cannot load the DT; fi; fi; else bootz ${loadaddr}; fi; mmcdev=0 mmcpart=1 mmcroot=/dev/mmcblk0p2 ro mmcrootfstype=ext4 rootwait netargs=setenv bootargs console=${console},${baudrate} root=/dev/nfs ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp netboot=echo Booting from net ...; run netargs; if test ${ip_dyn} = yes; then setenv get_cmd dhcp; else setenv get_cmd tftp; fi; ${get_cmd} zImage; if test ${boot_fdt} = yes || test ${boot_fdt} = try; then if ${get_cmd} ${fdt_addr} ${fdt_file}; then bootz ${loadaddr} - ${fdt_addr}; else if test ${boot_fdt} = try; then bootz ${loadaddr}; else echo WARN: Cannot load the DT; fi; fi; else bootz ${loadaddr}; fi; netmask=255.255.255.0 script=boot.scr serverip=172.16.1.7 uimage=uImage update_sd_firmware=if test ${ip_dyn} = yes; then setenv get_cmd dhcp; else setenv get_cmd tftp; fi; if mmc dev ${mmcdev}; then if ${get_cmd} ${update_sd_firmware_filename}; then setexpr fw_sz ${filesize} / 0x200; setexpr fw_sz ${fw_sz} + 1; mmc write ${loadaddr} 0x2 ${fw_sz}; fi; fi update_sd_firmware_filename=u-boot.imx
Environment size: 2718/8188 bytes => printenv bootargs printenv bootargs bootargs=console=ttymxc0,115200 root=/dev/mmcblk0p2 rootwait debug => tftpboot 0x12000000 172.16.1.4:/srv/tftp/queue/v3.4.70-18-g8a29189/uImage.multi-256m tftpboot 0x12000000 172.16.1.4:/srv/tftp/queue/v3.4.70-18-g8a29189/uImage.multi-256m Using FEC device TFTP from server 172.16.1.4; our IP address is 172.16.1.155 Filename '/srv/tftp/queue/v3.4.70-18-g8a29189/uImage.multi-256m'. Load address: 0x12000000 Loading: * TFTP error: 'File not found' (1) Not retrying... => ~$off
========================================================================
Board panda failure log: -------------------------------------------------
serverip=172.16.1.7 usb_boot=usb start ; bootp ; tftpboot 0x80000000 172.16.1.7:/srv/tftp/uImage.panda && tftp 0x81000000 172.16.1.7:/srv/tftp/omap4-panda.dtb && bootm 0x80000000 - 0x81000000 usbethaddr=2E:60:67:E0:49:01
Environment size: 816/131068 bytes Panda # printenv bootargs printenv bootargs bootargs=console=ttyO2,115200 root=/dev/mmcblk0p2 rootwait debug earlyprintk Panda # tftpboot 0x80000000 172.16.1.4:/srv/tftp/queue/v3.4.70-18-g8a29189/uImage.omap tftpboot 0x80000000 172.16.1.4:/srv/tftp/queue/v3.4.70-18-g8a29189/uImage.omap Waiting for Ethernet connection... done. Using sms0 device TFTP from server 172.16.1.4; our IP address is 172.16.1.182 Filename '/srv/tftp/queue/v3.4.70-18-g8a29189/uImage.omap'. Load address: 0x80000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ############ done Bytes transferred = 3385640 (33a928 hex) Panda # tftpboot 0x81000000 172.16.1.4:/srv/tftp/queue/v3.4.70-18-g8a29189/omap4-panda-es.dtb tftpboot 0x81000000 172.16.1.4:/srv/tftp/queue/v3.4.70-18-g8a29189/omap4-panda-es.dtb Waiting for Ethernet connection... done. Using sms0 device TFTP from server 172.16.1.4; our IP address is 172.16.1.182 Filename '/srv/tftp/queue/v3.4.70-18-g8a29189/omap4-panda-es.dtb'. Load address: 0x81000000 Loading: * TFTP error: 'File not found' (1) Not retrying... Panda # node: panda-es status: on ~$off
========================================================================
Board sama5 failure log: -------------------------------------------------
U-Boot> setenv autoboot no setenv autoboot no U-Boot> printenv printenv autoboot=no autoload=no baudrate=115200 bootargs=console=ttyS0,115200 root=/dev/mmcblk0p1 rootwait rw debug bootcmd=nand read 0x21000000 0x00180000 0x0000509E; nand read 0x22000000 0x00200000 0x00281428; bootm 0x22000000 - 0x21000000 bootdelay=6 bootfile=queue/v3.4.70-18-g8a29189/uImage.sama5 eth1addr=08:00:08:e1:88:0e ethact=gmacb0 ethprime=gmacb0 ipaddr=172.16.1.199 legacy_bootargs=console=ttyS0,115200 mtdparts=atmel_nand:8M(bootstrap/uboot/kernel)ro,-(rootfs) rw rootfstype=ubifs ubi.mtd=1 root=ubi0:rootfs serverip=172.16.1.4 stderr=serial stdin=serial stdout=serial
Environment size: 608/131067 bytes U-Boot> setenv bootargs 'console=ttyS0,115200 root=/dev/mmcblk0p1 rootwait rw' setenv bootargs 'console=ttyS0,115200 root=/dev/mmcblk0p1 rootwait rw' U-Boot> printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 root=/dev/mmcblk0p1 rootwait rw U-Boot> tftpboot 0x22000000 172.16.1.4:/srv/tftp/queue/v3.4.70-18-g8a29189/uImage.sama5 tftpboot 0x22000000 172.16.1.4:/srv/tftp/queue/v3.4.70-18-g8a29189/uImage.sama5 gmacb0: PHY present at 1 gmacb0: link up, 1000Mbps full-duplex (lpa: 0x0300) Using gmacb0 device TFTP from server 172.16.1.4; our IP address is 172.16.1.199 Filename '/srv/tftp/queue/v3.4.70-18-g8a29189/uImage.sama5'. Load address: 0x22000000 Loading: * TFTP error: 'File not found' (1) Not retrying... U-Boot> node: sama5 status: on ~$off
========================================================================
Board wandboard failure log: -------------------------------------------------
script=boot.scr serverip=172.16.1.7 uimage=uImage update_sd_firmware=if test ${ip_dyn} = yes; then setenv get_cmd dhcp; else setenv get_cmd tftp; fi; if mmc dev ${mmcdev}; then if ${get_cmd} ${update_sd_firmware_filename}; then setexpr fw_sz ${filesize} / 0x200; setexpr fw_sz ${fw_sz} + 1; mmc write ${loadaddr} 0x2 ${fw_sz}; fi; fi update_sd_firmware_filename=u-boot.imx
Environment size: 2711/8188 bytes => printenv bootargs printenv bootargs bootargs=console=ttymxc0,115200 root=/dev/mmcblk0p2 rootwait debug => tftpboot 0x12000000 172.16.1.4:/srv/tftp/queue/v3.4.70-18-g8a29189/uImage.imx tftpboot 0x12000000 172.16.1.4:/srv/tftp/queue/v3.4.70-18-g8a29189/uImage.imx Using FEC device TFTP from server 172.16.1.4; our IP address is 172.16.1.155 Filename '/srv/tftp/queue/v3.4.70-18-g8a29189/uImage.imx'. Load address: 0x12000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################## 3.6 MiB/s done Bytes transferred = 3166264 (305038 hex) => tftpboot 0x14000000 172.16.1.4:/srv/tftp/queue/v3.4.70-18-g8a29189/imx6q-wandboard.dtb tftpboot 0x14000000 172.16.1.4:/srv/tftp/queue/v3.4.70-18-g8a29189/imx6q-wandboard.dtb Using FEC device TFTP from server 172.16.1.4; our IP address is 172.16.1.155 Filename '/srv/tftp/queue/v3.4.70-18-g8a29189/imx6q-wandboard.dtb'. Load address: 0x14000000 Loading: * TFTP error: 'File not found' (1) Not retrying... => node: wandboard status: on ~$off