mainline boot: 55 passed 25 failed (mainline/v4.6-rc4-7-g95d0c42)

Full logs are available at http://arm-soc.lixom.net/bootlogs/mainline/v4.6-rc4-7-g95d0c42/

Failed boards:

arndale arm-multi_v7_nosmp_defconfig : FAILED 2:31.54 bbb arm-omap2plus_defconfig : FAILED 1:54.86 bbb arm-multi_v7_defconfig : FAILED 1:59.38 bbb arm-multi_v7_nosmp_defconfig : FAILED 2:20.87 beagleboard-x15 arm-omap2plus_defconfig : FAILED 1:44.28 beagleboard-x15 arm-multi_v7_defconfig : FAILED 1:43.77 beagleboard-x15 arm-multi_lpae_defconfig : FAILED 1:47.42 beagleboard-x15 arm-multi_v7_nosmp_defconfig : FAILED 2:02.52 beaver arm-tegra_defconfig : FAILED 1:44.36 beaver arm-multi_v7_defconfig : FAILED 2:00.68 beaver arm-multi_v7_nosmp_defconfig : FAILED 1:51.70 colombus arm-multi_v7_nosmp_defconfig : FAILED 3:20.15 cosmic arm-imx_v6_v7_defconfig : FAILED 2:01.26 cosmic arm-multi_v7_defconfig : FAILED 2:13.33 cosmic arm-multi_v7_nosmp_defconfig : FAILED 2:13.13 dalmore arm-tegra_defconfig : FAILED 1:48.66 dalmore arm-multi_v7_defconfig : FAILED 2:06.64 dalmore arm-multi_lpae_defconfig : FAILED 2:02.54 dalmore arm-multi_v7_nosmp_defconfig : FAILED 1:51.56 minnowmax minnowmax_defconfig : NO BUILD odroidu3 arm-exynos_defconfig : FAILED 1:48.86 snow arm-multi_v7_nosmp_defconfig : FAILED 3:13.39 snowball arm-u8500_defconfig : FAILED 2:00.75 snowball arm-multi_v7_defconfig : FAILED 2:17.62 snowball arm-multi_v7_nosmp_defconfig : FAILED 2:00.54 wandboard arm-imx_v6_v7_defconfig : FAILED 2:59.06

Successful boards:

apc arm-vt8500_v6_v7_defconfig : passed 1:13.52 arndale arm-exynos_defconfig : passed 1:31.44 arndale arm-multi_v7_defconfig : passed 1:29.34 arndale arm-multi_lpae_defconfig : passed 1:19.30 capri arm-bcm_defconfig : passed 0:50.62 capri arm-multi_v7_defconfig : passed 0:59.31 capri arm-multi_v7_nosmp_defconfig : warnings 0:56.05 chitra powerpc-pasemi_defconfig : passed 2:10.24 chitra powerpc-ppc64_defconfig : passed 2:02.63 colibri-vf61 arm-imx_v6_v7_defconfig : passed 1:29.64 colibri-vf61 arm-multi_v7_defconfig : passed 1:28.81 colibri-vf61 arm-multi_v7_nosmp_defconfig : passed 1:25.26 colombus arm-sunxi_defconfig : passed 2:32.30 colombus arm-multi_v7_defconfig : passed 2:54.62 colombus arm-multi_lpae_defconfig : passed 2:35.89 cubie arm-sunxi_defconfig : passed 0:58.49 cubie arm-multi_v7_defconfig : passed 1:10.93 cubie arm-multi_v7_nosmp_defconfig : passed 0:57.71 cubie2 arm-sunxi_defconfig : passed 0:48.60 cubie2 arm-multi_v7_defconfig : passed 1:05.00 cubie2 arm-multi_lpae_defconfig : passed 0:53.30 cubie2 arm-multi_v7_nosmp_defconfig : warnings 0:55.11 cubox arm-multi_v7_defconfig : passed 1:20.96 cubox arm-mvebu_v7_defconfig : passed 1:00.37 cubox arm-multi_v7_nosmp_defconfig : passed 1:22.67 hummingboard arm-imx_v6_v7_defconfig : passed 1:27.05 hummingboard arm-multi_v7_defconfig : passed 1:22.53 hummingboard arm-multi_v7_nosmp_defconfig : warnings 1:18.88 jetsontk1 arm-tegra_defconfig : passed 1:35.96 jetsontk1 arm-multi_v7_defconfig : passed 1:43.99 jetsontk1 arm-multi_lpae_defconfig : passed 1:43.52 jetsontk1 arm-multi_v7_nosmp_defconfig : warnings 1:36.33 pandaes arm-omap2plus_defconfig : warnings 1:41.15 pandaes arm-multi_v7_defconfig : passed 1:47.75 pandaes arm-multi_v7_nosmp_defconfig : warnings 1:54.92 pi arm-exynos_defconfig : passed 2:08.96 pi arm-multi_v7_defconfig : passed 2:32.59 pi arm-multi_lpae_defconfig : passed 2:42.92 pi arm-multi_v7_nosmp_defconfig : warnings 2:10.01 pit arm-exynos_defconfig : passed 2:12.91 pit arm-multi_v7_defconfig : passed 2:23.16 pit arm-multi_lpae_defconfig : passed 2:26.87 pit arm-multi_v7_nosmp_defconfig : warnings 2:09.88 seattle arm64-defconfig : warnings 2:14.70 snow arm-exynos_defconfig : passed 2:13.34 snow arm-multi_v7_defconfig : passed 2:26.00 snow arm-multi_lpae_defconfig : passed 1:58.93 socfpga arm-socfpga_defconfig : passed 1:24.35 socfpga arm-multi_v7_defconfig : passed 1:23.40 socfpga arm-multi_v7_nosmp_defconfig : warnings 1:28.17 trimslice arm-tegra_defconfig : passed 2:41.19 trimslice arm-multi_v7_defconfig : passed 1:40.78 trimslice arm-multi_v7_nosmp_defconfig : warnings 2:39.85 wandboard arm-multi_v7_defconfig : passed 1:09.02 wandboard arm-multi_v7_nosmp_defconfig : warnings 1:12.70

Offline boards:

omap5uevm arm-omap2plus_defconfig : OFFLINE 1:17.96 omap5uevm arm-multi_v7_defconfig : OFFLINE 1:20.36 omap5uevm arm-multi_lpae_defconfig : OFFLINE 1:39.80 omap5uevm arm-multi_v7_nosmp_defconfig : OFFLINE 3:10.07 parallella arm-multi_v7_defconfig : OFFLINE 2:23.18 parallella arm-multi_v7_nosmp_defconfig : OFFLINE 2:19.82 rk3288evb arm-multi_v7_defconfig : OFFLINE 0:48.80 rk3288evb arm-multi_lpae_defconfig : OFFLINE 0:46.73 rk3288evb arm-multi_v7_nosmp_defconfig : OFFLINE 0:48.62 sama5 arm-sama5_defconfig : OFFLINE 2:27.46 sama5d3-xplained arm-sama5_defconfig : OFFLINE 2:41.39 seaboard arm-tegra_defconfig : OFFLINE 2:22.24 seaboard arm-multi_v7_defconfig : OFFLINE 2:22.64 seaboard arm-multi_v7_nosmp_defconfig : OFFLINE 2:13.22

Board legend is available at http://arm-soc.lixom.net/boards.html

Board arndale-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------

[ 0.000000] Linux version 4.6.0-rc4-00007-g95d0c42 (build@brutus) (gcc version 4.9.2 (GCC) ) #1 Mon Apr 18 10:56:25 PDT 2016 [ 0.000000] CPU: ARMv7 Processor [410fc0f4] revision 4 (ARMv7), cr=10c53c7d [ 0.000000] CPU: div instructions available: patching division code [ 2.072818] [c1038dc0] *pgd=4100041e(bad) [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache [ 0.000000] Machine model: Insignal Arndale evaluation board based on EXYNOS5250 [ 2.091132] Modules linked in: [ 0.000000] cma: Reserved 64 MiB at 0xbc000000 [ 0.000000] Memory policy: Data cache writeback [ 0.000000] Samsung CPU ID: 0x43520010 [ 0.000000] On node 0 totalpages: 520192 [ 0.000000] free_area_init_node: node 0, pgdat c10fd420, node_mem_map eeff7000 [ 0.000000] DMA zone: 1536 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 192512 pages, LIFO batch:31 [ 0.000000] HighMem zone: 327680 pages, LIFO batch:31 [ 0.000000] ------------[ cut here ]------------ [ 0.000000] WARNING: CPU: 0 PID: 0 at /home/build/work/batch/arch/arm/kernel/devtree.c:149 arm_dt_init_cpu_maps+0xd4/0x130 [ 0.000000] DT /cpu 2 nodes greater than max cores 1, capping them [ 0.000000] Modules linked in: [ 0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 4.6.0-rc4-00007-g95d0c42 #1 [ 0.000000] Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) [ 0.000000] [<c030e900>] (unwind_backtrace) from [<c030b474>] (show_stack+0x10/0x14) [ 0.000000] [<c030b474>] (show_stack) from [<c0335db0>] (__warn+0xe4/0xfc) [ 0.000000] [<c0335db0>] (__warn) from [<c0335e00>] (warn_slowpath_fmt+0x38/0x48) [ 0.000000] [<c0335e00>] (warn_slowpath_fmt) from [<c0f040e8>] (arm_dt_init_cpu_maps+0xd4/0x130) [ 0.000000] [<c0f040e8>] (arm_dt_init_cpu_maps) from [<c0f03424>] (setup_arch+0x7b8/0x8ec) [ 0.000000] [<c0f03424>] (setup_arch) from [<c0f00944>] (start_kernel+0x68/0x370) [ 0.000000] [<c0f00944>] (start_kernel) from [<40208078>] (0x40208078) [ 0.000000] ---[ end trace cb88537fdc8fa200 ]--- [ 0.000000] CPU: All CPU(s) started in HYP mode. [ 0.000000] CPU: Virtualization extensions available. [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768

[PYBOOT] [arndale 02:28]: Timed out waiting for "<type 'str'>":

[PYBOOT] [arndale 02:29]: got exception: timeout ~$off

[PYBOOT] [arndale 02:30]: Done. Board bbb-arm-multi_v7_defconfig failure log: -------------------------------------------------

[ 1.630402] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.640609] ledtrig-cpu: registered to indicate activity on CPUs [ 1.647673] usbcore: registered new interface driver usbhid [ 1.653596] usbhid: USB HID core driver [ 1.665543] NET: Registered protocol family 10 [ 1.672116] sit: IPv6 over IPv4 tunneling driver [ 1.678242] NET: Registered protocol family 17 [ 1.683011] can: controller area network core (rev 20120528 abi 9) [ 1.689664] NET: Registered protocol family 29 [ 1.694385] can: raw protocol (rev 20120528) [ 1.698904] can: broadcast manager protocol (rev 20120528 t) [ 1.704897] can: netlink gateway (rev 20130117) max_hops=1 [ 1.711644] Key type dns_resolver registered [ 1.716526] omap_voltage_late_init: Voltage driver support not added [ 1.724799] ThumbEE CPU extension supported. [ 1.729432] Registering SWP/SWPB emulation handler [ 1.772101] tps65217 0-0024: TPS65217 ID 0xe version 1.2 [ 1.778642] at24 0-0050: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.786408] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 1.795122] at24 2-0054: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.803042] at24 2-0055: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.810866] at24 2-0056: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.818679] at24 2-0057: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.826031] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz [ 1.834748] cpufreq: cpufreq_online: CPU0: Running at unlisted freq: 550000 KHz [ 1.842671] cpufreq: cpufreq_online: CPU0: Unlisted initial frequency changed to: 600000 KHz [ 1.852407] mmc1: new high speed MMC card at address 0001 [ 1.859644] hctosys: unable to open rtc device (rtc0) [ 1.872715] mmcblk1: mmc1:0001 MMC02G 1.79 GiB [ 1.878745] mmcblk1boot0: mmc1:0001 MMC02G partition 1 1.00 MiB [ 1.885734] mmcblk1boot1: mmc1:0001 MMC02G partition 2 1.00 MiB [ 1.894593] mmcblk1: p1 p2 [ 1.900312] Waiting for root device /dev/mmcblk0p2...

[PYBOOT] [bbb 01:56]: Timed out waiting for "<type 'str'>":

[PYBOOT] [bbb 01:57]: got exception: timeout ~$off

[PYBOOT] [bbb 01:58]: Done. Board bbb-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------

[ 1.320959] sdhci: Secure Digital Host Controller Interface driver [ 1.327490] sdhci: Copyright(c) Pierre Ossman [ 1.333309] omap_hsmmc 48060000.mmc: Got CD GPIO [ 1.396110] Synopsys Designware Multimedia Card Interface Driver [ 1.403506] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.412731] ledtrig-cpu: registered to indicate activity on CPUs [ 1.419469] usbcore: registered new interface driver usbhid [ 1.425352] usbhid: USB HID core driver [ 1.434982] NET: Registered protocol family 10 [ 1.441450] sit: IPv6 over IPv4 tunneling driver [ 1.447328] NET: Registered protocol family 17 [ 1.452070] can: controller area network core (rev 20120528 abi 9) [ 1.458671] NET: Registered protocol family 29 [ 1.463366] can: raw protocol (rev 20120528) [ 1.467881] can: broadcast manager protocol (rev 20120528 t) [ 1.473859] can: netlink gateway (rev 20130117) max_hops=1 [ 1.480425] Key type dns_resolver registered [ 1.485230] omap_voltage_late_init: Voltage driver support not added [ 1.493030] ThumbEE CPU extension supported. [ 1.505612] at24 0-0050: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.513190] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 1.521267] at24 2-0054: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.529017] at24 2-0055: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.536715] at24 2-0056: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.544400] at24 2-0057: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.551686] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz [ 1.559361] hctosys: unable to open rtc device (rtc0) [ 1.570183] Waiting for root device /dev/mmcblk0p2... [ 1.605373] mmc1: new high speed MMC card at address 0001 [ 1.611845] mmcblk1: mmc1:0001 MMC02G 1.79 GiB [ 1.616917] mmcblk1boot0: mmc1:0001 MMC02G partition 1 1.00 MiB [ 1.623408] mmcblk1boot1: mmc1:0001 MMC02G partition 2 1.00 MiB [ 1.631854] mmcblk1: p1 p2

[PYBOOT] [bbb 02:18]: Timed out waiting for "<type 'str'>":

[PYBOOT] [bbb 02:19]: got exception: timeout ~$off

[PYBOOT] [bbb 02:20]: Done. Board bbb-arm-omap2plus_defconfig failure log: -------------------------------------------------

[ 2.053993] omap_hsmmc 481d8000.mmc: lookup for GPIO cd failed [ 2.060110] omap_hsmmc 481d8000.mmc: GPIO lookup for consumer wp [ 2.066433] omap_hsmmc 481d8000.mmc: using device tree for GPIO lookup [ 2.073307] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@481d8000[0]' [ 2.082900] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@481d8000[0]' [ 2.092401] omap_hsmmc 481d8000.mmc: using lookup tables for GPIO lookup [ 2.099415] omap_hsmmc 481d8000.mmc: lookup for GPIO wp failed [ 2.142770] ledtrig-cpu: registered to indicate activity on CPUs [ 2.151460] oprofile: using arm/armv7 [ 2.156607] Initializing XFRM netlink socket [ 2.161702] NET: Registered protocol family 10 [ 2.172578] sit: IPv6 over IPv4 tunneling driver [ 2.181371] NET: Registered protocol family 17 [ 2.186309] NET: Registered protocol family 15 [ 2.191548] Key type dns_resolver registered [ 2.196408] omap_voltage_late_init: Voltage driver support not added [ 2.203143] sr_dev_init: No voltage domain specified for smartreflex0. Cannot initialize [ 2.211606] sr_dev_init: No voltage domain specified for smartreflex1. Cannot initialize [ 2.221871] ThumbEE CPU extension supported. [ 2.226522] Registering SWP/SWPB emulation handler [ 2.231557] SmartReflex Class3 initialized [ 2.301240] tps65217 0-0024: TPS65217 ID 0xe version 1.2 [ 2.308530] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 2.319129] mmc1: new high speed MMC card at address 0001 [ 2.331338] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz [ 2.339690] mmcblk1: mmc1:0001 MMC02G 1.79 GiB [ 2.347503] hctosys: unable to open rtc device (rtc0) [ 2.352958] sr_init: No PMIC hook to init smartreflex [ 2.358617] sr_init: platform driver register failed for SR [ 2.399126] mmcblk1boot0: mmc1:0001 MMC02G partition 1 1.00 MiB [ 2.407112] mmcblk1boot1: mmc1:0001 MMC02G partition 2 1.00 MiB [ 2.421439] mmcblk1: p1 p2 [ 2.438936] Waiting for root device /dev/mmcblk0p2...

[PYBOOT] [bbb 01:51]: Timed out waiting for "<type 'str'>":

[PYBOOT] [bbb 01:52]: got exception: timeout ~$off

[PYBOOT] [bbb 01:54]: Done. Board beagleboard-x15-arm-multi_lpae_defconfig failure log: -------------------------------------------------

[ 1.583011] sit: IPv6 over IPv4 tunneling driver [ 1.588317] NET: Registered protocol family 17 [ 1.592981] can: controller area network core (rev 20120528 abi 9) [ 1.599498] NET: Registered protocol family 29 [ 1.604160] can: raw protocol (rev 20120528) [ 1.608641] can: broadcast manager protocol (rev 20120528 t) [ 1.614574] can: netlink gateway (rev 20130117) max_hops=1 [ 1.620606] Key type dns_resolver registered [ 1.625165] omap_voltage_late_init: Voltage driver support not added [ 1.632376] Power Management for TI OMAP4+ devices. [ 1.637665] ThumbEE CPU extension supported. [ 1.642157] Registering SWP/SWPB emulation handler [ 1.648960] palmas 0-0058: Irq flag is 0x00000008 [ 1.672183] palmas 0-0058: Muxing GPIO 2f, PWM 0, LED 0 [ 1.702575] palmas-rtc 48070000.i2c:tps659038@58:tps659038_rtc: rtc core: registered 48070000.i2c:tps659 as rtc1 [ 1.717252] at24 0-0050: 4096 byte 24c32 EEPROM, writable, 1 bytes/write [ 1.724320] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 1.750526] rtc-ds1307 2-006f: SET TIME! [ 1.756267] rtc-ds1307 2-006f: rtc core: registered mcp7941x as rtc0 [ 1.762936] rtc-ds1307 2-006f: 'wakeup-source' is set, request for an IRQ is disabled! [ 1.771237] rtc-ds1307 2-006f: 64 bytes nvram [ 1.775840] omap_i2c 48060000.i2c: bus 2 rev0.12 at 400 kHz [ 1.784892] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 1.821123] vdd_3v3: supplied by regen1 [ 1.860977] rtc-ds1307 2-006f: setting system clock to 2001-01-01 00:00:00 UTC (978307200) [ 1.878842] aic_dvdd_fixed: disabling [ 1.883424] ldousb: disabling [ 1.887508] Waiting for root device /dev/mmcblk0p1... [ 1.914582] mmc1: new high speed MMC card at address 0001 [ 1.920558] mmcblk1: mmc1:0001 S10004 3.56 GiB [ 1.925448] mmcblk1boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 1.931804] mmcblk1boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 1.938664] mmcblk1: p1

[PYBOOT] [beagleboard-x15 01:44]: Timed out waiting for "<type 'str'>":

[PYBOOT] [beagleboard-x15 01:45]: got exception: timeout ~$off

[PYBOOT] [beagleboard-x15 01:46]: Done. Board beagleboard-x15-arm-multi_v7_defconfig failure log: -------------------------------------------------

[ 1.582840] sit: IPv6 over IPv4 tunneling driver [ 1.588148] NET: Registered protocol family 17 [ 1.592813] can: controller area network core (rev 20120528 abi 9) [ 1.599325] NET: Registered protocol family 29 [ 1.603981] can: raw protocol (rev 20120528) [ 1.608462] can: broadcast manager protocol (rev 20120528 t) [ 1.614390] can: netlink gateway (rev 20130117) max_hops=1 [ 1.620424] Key type dns_resolver registered [ 1.624978] omap_voltage_late_init: Voltage driver support not added [ 1.632193] Power Management for TI OMAP4+ devices. [ 1.637500] ThumbEE CPU extension supported. [ 1.641996] Registering SWP/SWPB emulation handler [ 1.648805] palmas 0-0058: Irq flag is 0x00000008 [ 1.672035] palmas 0-0058: Muxing GPIO 2f, PWM 0, LED 0 [ 1.702322] palmas-rtc 48070000.i2c:tps659038@58:tps659038_rtc: rtc core: registered 48070000.i2c:tps659 as rtc1 [ 1.716966] at24 0-0050: 4096 byte 24c32 EEPROM, writable, 1 bytes/write [ 1.724030] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 1.750375] rtc-ds1307 2-006f: SET TIME! [ 1.756110] rtc-ds1307 2-006f: rtc core: registered mcp7941x as rtc0 [ 1.762772] rtc-ds1307 2-006f: 'wakeup-source' is set, request for an IRQ is disabled! [ 1.771077] rtc-ds1307 2-006f: 64 bytes nvram [ 1.775680] omap_i2c 48060000.i2c: bus 2 rev0.12 at 400 kHz [ 1.784746] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 1.820938] vdd_3v3: supplied by regen1 [ 1.858263] rtc-ds1307 2-006f: setting system clock to 2001-01-01 00:00:00 UTC (978307200) [ 1.876170] aic_dvdd_fixed: disabling [ 1.880889] ldousb: disabling [ 1.884982] Waiting for root device /dev/mmcblk0p1... [ 1.912083] mmc1: new high speed MMC card at address 0001 [ 1.918056] mmcblk1: mmc1:0001 S10004 3.56 GiB [ 1.922946] mmcblk1boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 1.929301] mmcblk1boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 1.936173] mmcblk1: p1

[PYBOOT] [beagleboard-x15 01:41]: Timed out waiting for "<type 'str'>":

[PYBOOT] [beagleboard-x15 01:42]: got exception: timeout ~$off

[PYBOOT] [beagleboard-x15 01:43]: Done. Board beagleboard-x15-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------

[ 1.463360] sit: IPv6 over IPv4 tunneling driver [ 1.468547] NET: Registered protocol family 17 [ 1.473207] can: controller area network core (rev 20120528 abi 9) [ 1.479706] NET: Registered protocol family 29 [ 1.484358] can: raw protocol (rev 20120528) [ 1.488827] can: broadcast manager protocol (rev 20120528 t) [ 1.494758] can: netlink gateway (rev 20130117) max_hops=1 [ 1.500722] Key type dns_resolver registered [ 1.505274] omap_voltage_late_init: Voltage driver support not added [ 1.512235] Power Management for TI OMAP4+ devices. [ 1.517501] ThumbEE CPU extension supported. [ 1.522088] ata1: SATA link down (SStatus 0 SControl 300) [ 1.529018] palmas 0-0058: Irq flag is 0x00000008 [ 1.554609] palmas 0-0058: Muxing GPIO 2f, PWM 0, LED 0 [ 1.582314] palmas-rtc 48070000.i2c:tps659038@58:tps659038_rtc: rtc core: registered 48070000.i2c:tps659 as rtc1 [ 1.595835] at24 0-0050: 4096 byte 24c32 EEPROM, writable, 1 bytes/write [ 1.602879] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 1.628167] rtc-ds1307 2-006f: SET TIME! [ 1.633786] rtc-ds1307 2-006f: rtc core: registered mcp7941x as rtc0 [ 1.640453] rtc-ds1307 2-006f: 'wakeup-source' is set, request for an IRQ is disabled! [ 1.648762] rtc-ds1307 2-006f: 64 bytes nvram [ 1.653338] omap_i2c 48060000.i2c: bus 2 rev0.12 at 400 kHz [ 1.661114] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 1.693369] vdd_3v3: supplied by regen1 [ 1.724865] rtc-ds1307 2-006f: setting system clock to 2001-01-01 00:00:00 UTC (978307200) [ 1.737733] aic_dvdd_fixed: disabling [ 1.742707] ldousb: disabling [ 1.748494] Waiting for root device /dev/mmcblk0p1... [ 1.794719] mmc1: new high speed MMC card at address 0001 [ 1.800579] mmcblk1: mmc1:0001 S10004 3.56 GiB [ 1.805430] mmcblk1boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 1.811714] mmcblk1boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 1.818495] mmcblk1: p1

[PYBOOT] [beagleboard-x15 01:59]: Timed out waiting for "<type 'str'>":

[PYBOOT] [beagleboard-x15 02:00]: got exception: timeout ~$off

[PYBOOT] [beagleboard-x15 02:01]: Done. Board beagleboard-x15-arm-omap2plus_defconfig failure log: -------------------------------------------------

[ 2.165042] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 2.171920] of_get_named_gpiod_flags: parsed 'cd-gpios' property of node '/ocp/mmc@4809c000[0]' - status (0) [ 2.182318] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 2.187180] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer wp [ 2.193493] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 2.200348] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@4809c000[0]' [ 2.209943] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@4809c000[0]' [ 2.219448] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 2.226506] omap_hsmmc 4809c000.mmc: lookup for GPIO wp failed [ 2.273561] omap_hsmmc 480b4000.mmc: GPIO lookup for consumer cd [ 2.279851] omap_hsmmc 480b4000.mmc: using device tree for GPIO lookup [ 2.286730] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/ocp/mmc@480b4000[0]' [ 2.296328] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/ocp/mmc@480b4000[0]' [ 2.305825] omap_hsmmc 480b4000.mmc: using lookup tables for GPIO lookup [ 2.312874] omap_hsmmc 480b4000.mmc: lookup for GPIO cd failed [ 2.319002] omap_hsmmc 480b4000.mmc: GPIO lookup for consumer wp [ 2.325317] omap_hsmmc 480b4000.mmc: using device tree for GPIO lookup [ 2.332162] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@480b4000[0]' [ 2.341746] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@480b4000[0]' [ 2.351250] omap_hsmmc 480b4000.mmc: using lookup tables for GPIO lookup [ 2.358292] omap_hsmmc 480b4000.mmc: lookup for GPIO wp failed [ 2.364990] vdd_3v3: supplied by regen1 [ 2.403696] hctosys: unable to open rtc device (rtc0) [ 2.408998] sr_init: No PMIC hook to init smartreflex [ 2.414491] sr_init: platform driver register failed for SR [ 2.455331] mmc1: new high speed MMC card at address 0001 [ 2.461125] aic_dvdd_fixed: disabling [ 2.463259] mmcblk1: mmc1:0001 S10004 3.56 GiB [ 2.463914] mmcblk1boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 2.464566] mmcblk1boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 2.474173] mmcblk1: p1 [ 2.485174] ldousb: disabling [ 2.491090] Waiting for root device /dev/mmcblk0p1...

[PYBOOT] [beagleboard-x15 01:41]: Timed out waiting for "<type 'str'>":

[PYBOOT] [beagleboard-x15 01:42]: got exception: timeout ~$off

[PYBOOT] [beagleboard-x15 01:43]: Done. Board beaver-arm-multi_v7_defconfig failure log: -------------------------------------------------

[ 3.153450] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 3.159037] r8169 0000:01:00.0: enabling device (0140 -> 0143) [ 3.166116] r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xf09f2000, 02:04:4b:01:60:99, XID 0c900800 IRQ 375 [ 3.176116] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 3.185527] +VDD_5V_HDMI: supplied by sys_3v3,vdd_3v3_alw [ 3.191031] vdd_1v8_gen: supplied by vdd_5v_in [ 3.197649] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.204267] [drm] No driver support for vblank timestamp query. [ 3.210207] drm drm: No connectors reported connected with modes [ 3.216212] [drm] Cannot find any crtc or sizes - going 1024x768 [ 3.241987] Console: switching to colour frame buffer device 128x48 [ 3.254292] drm drm: fb0: frame buffer device [ 3.273402] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.282004] usb3_vbus: supplied by vdd_5v_in [ 3.288419] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 3.294876] tegra-ehci 7d004000.usb: EHCI Host Controller [ 3.300286] tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1 [ 3.308125] tegra-ehci 7d004000.usb: irq 343, io mem 0x7d004000 [ 3.323410] tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.00 [ 3.330271] hub 1-0:1.0: USB hub found [ 3.334043] hub 1-0:1.0: 1 port detected [ 3.338932] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.344341] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 3.352076] tegra-ehci 7d008000.usb: irq 344, io mem 0x7d008000 [ 3.363404] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.00 [ 3.370174] hub 2-0:1.0: USB hub found [ 3.373944] hub 2-0:1.0: 1 port detected [ 3.382406] tps65910-rtc tps65910-rtc: setting system clock to 2000-01-01 00:00:02 UTC (946684802) [ 3.396022] vdd_sata,avdd_plle: disabling [ 3.400428] usb1_vbus: disabling [ 3.404522] Waiting for root device /dev/mmcblk0p1... [ 3.683412] usb 2-1: new high-speed USB device number 2 using tegra-ehci [ 4.621913] asix 2-1:1.0 eth1: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 58:6d:8f:50:ba:18

[PYBOOT] [beaver 01:57]: Timed out waiting for "<type 'str'>":

[PYBOOT] [beaver 01:58]: got exception: timeout ~$off

[PYBOOT] [beaver 02:00]: Done. Board beaver-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------

[ 3.122733] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 3.128317] r8169 0000:01:00.0: enabling device (0140 -> 0143) [ 3.134937] r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xf087e000, 02:04:4b:01:60:99, XID 0c900800 IRQ 375 [ 3.144928] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 3.154089] +VDD_5V_HDMI: supplied by sys_3v3,vdd_3v3_alw [ 3.159562] vdd_1v8_gen: supplied by vdd_5v_in [ 3.165199] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.171810] [drm] No driver support for vblank timestamp query. [ 3.177739] drm drm: No connectors reported connected with modes [ 3.183738] [drm] Cannot find any crtc or sizes - going 1024x768 [ 3.203065] Console: switching to colour frame buffer device 128x48 [ 3.214815] drm drm: fb0: frame buffer device [ 3.219251] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.227152] usb3_vbus: supplied by vdd_5v_in [ 3.233406] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 3.239853] tegra-ehci 7d004000.usb: EHCI Host Controller [ 3.245257] tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1 [ 3.252976] tegra-ehci 7d004000.usb: irq 343, io mem 0x7d004000 [ 3.267827] tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.00 [ 3.274194] hub 1-0:1.0: USB hub found [ 3.277959] hub 1-0:1.0: 1 port detected [ 3.282613] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.288022] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 3.295681] tegra-ehci 7d008000.usb: irq 344, io mem 0x7d008000 [ 3.307824] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.00 [ 3.314096] hub 2-0:1.0: USB hub found [ 3.317853] hub 2-0:1.0: 1 port detected [ 3.325362] tps65910-rtc tps65910-rtc: setting system clock to 2000-01-01 00:00:01 UTC (946684801) [ 3.338450] vdd_sata,avdd_plle: disabling [ 3.342836] usb1_vbus: disabling [ 3.346763] Waiting for root device /dev/mmcblk0p1... [ 3.627829] usb 2-1: new high-speed USB device number 2 using tegra-ehci [ 4.566390] asix 2-1:1.0 eth1: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 58:6d:8f:50:ba:18

[PYBOOT] [beaver 01:49]: Timed out waiting for "<type 'str'>":

[PYBOOT] [beaver 01:50]: got exception: timeout ~$off

[PYBOOT] [beaver 01:51]: Done. Board beaver-arm-tegra_defconfig failure log: -------------------------------------------------

[ 3.434036] r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xf087e000, 02:04:4b:01:60:99, XID 0c900800 IRQ 375 [ 3.444037] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 3.452916] +VDD_5V_HDMI: supplied by sys_3v3,vdd_3v3_alw [ 3.458441] vdd_1v8_gen: supplied by vdd_5v_in [ 3.467001] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.473630] [drm] No driver support for vblank timestamp query. [ 3.479639] drm drm: No connectors reported connected with modes [ 3.485650] [drm] Cannot find any crtc or sizes - going 1024x768 [ 3.512079] Console: switching to colour frame buffer device 128x48 [ 3.523913] drm drm: fb0: frame buffer device [ 3.550902] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.558422] usb3_vbus: supplied by vdd_5v_in [ 3.564528] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 3.570996] tegra-ehci 7d004000.usb: EHCI Host Controller [ 3.576418] tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1 [ 3.584399] tegra-ehci 7d004000.usb: irq 343, io mem 0x7d004000 [ 3.600907] tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.00 [ 3.608213] hub 1-0:1.0: USB hub found [ 3.612006] hub 1-0:1.0: 1 port detected [ 3.616810] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.622251] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 3.630124] tegra-ehci 7d008000.usb: irq 344, io mem 0x7d008000 [ 3.650899] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.00 [ 3.658084] hub 2-0:1.0: USB hub found [ 3.661863] hub 2-0:1.0: 1 port detected [ 3.670164] tps65910-rtc tps65910-rtc: setting system clock to 2000-01-01 00:00:02 UTC (946684802) [ 3.688978] vdd_sata,avdd_plle: disabling [ 3.693568] usb1_vbus: disabling [ 3.696994] ALSA device list: [ 3.699950] #0: NVIDIA Tegra Beaver [ 3.704194] Waiting for root device /dev/mmcblk0p1... [ 3.980907] usb 2-1: new high-speed USB device number 2 using tegra-ehci [ 4.984544] asix 2-1:1.0 eth1: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 58:6d:8f:50:ba:18

[PYBOOT] [beaver 01:41]: Timed out waiting for "<type 'str'>":

[PYBOOT] [beaver 01:42]: got exception: timeout ~$off

[PYBOOT] [beaver 01:43]: Done. Board colombus-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------

[....] Synthesizing the initial hotplug events...[?25l[?1c7[ ok 8[?25h[?0cdone. [....] Waiting for /dev to be fully populated...[?25l[?1c7[ ok 8[?25h[?0cdone. [....] Activating swap...[?25l[?1c7[ ok 8[?25h[?0cdone. [ 42.014521] EXT4-fs (mmcblk0p1): warning: mounting fs with errors, running e2fsck is recommended [ 42.029079] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [....] Cleaning up temporary files... /tmp[?25l[?1c7[ ok 8[?25h[?0c. [....] Activating lvm and md swap...[?25l[?1c7[ ok 8[?25h[?0cdone. [....] Checking file systems...fsck from util-linux 2.20.1 [?25l[?1c7[ ok 8[?25h[?0cdone. [....] Mounting local filesystems...[?25l[?1c7[ ok 8[?25h[?0cdone. [....] Activating swapfile swap...[?25l[?1c7[ ok 8[?25h[?0cdone. [....] Cleaning up temporary files...[?25l[?1c7[ ok 8[?25h[?0c. [....] Setting kernel variables ...[?25l[?1c7[ ok 8[?25h[?0cdone. [ 85.487534] random: dd urandom read with 58 bits of entropy available [....] Configuring network interfaces...Internet Systems Consortium DHCP Client 4.2.2 Copyright 2004-2011 Internet Systems Consortium. All rights reserved. For info, please visit https://www.isc.org/software/dhcp/

[ 89.870351] eth0: device MAC address fe:99:f2:8f:50:fd [ 90.025462] RX IPC Checksum Offload disabled [ 90.030083] No MAC Management Counters available [ 90.035848] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready Listening on LPF/eth0/fe:99:f2:8f:50:fd Sending on LPF/eth0/fe:99:f2:8f:50:fd Sending on Socket/fallback DHCPREQUEST on eth0 to 255.255.255.255 port 67 DHCPREQUEST on eth0 to 255.255.255.255 port 67 DHCPREQUEST on eth0 to 255.255.255.255 port 67 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 5 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 12 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 17 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 18

[PYBOOT] [colombus 03:17]: Timed out waiting for "<type 'str'>":

[PYBOOT] [colombus 03:18]: got exception: timeout ~$off

[PYBOOT] [colombus 03:19]: Done. Board cosmic-arm-imx_v6_v7_defconfig failure log: -------------------------------------------------

[ 14.450822] blk_update_request: I/O error, dev mmcblk0, sector 3633185 [ 18.525058] mmcblk0: error -110 transferring data, sector 3633186, nr 230, cmd response 0x900, card status 0x0 [ 18.535383] blk_update_request: I/O error, dev mmcblk0, sector 3633186 [ 22.609573] mmcblk0: error -110 transferring data, sector 3633187, nr 229, cmd response 0x900, card status 0x0 [ 22.619898] blk_update_request: I/O error, dev mmcblk0, sector 3633187 [ 26.694135] mmcblk0: error -110 transferring data, sector 3633188, nr 228, cmd response 0x900, card status 0x0 [ 26.704463] blk_update_request: I/O error, dev mmcblk0, sector 3633188 [ 30.778649] mmcblk0: error -110 transferring data, sector 3633189, nr 227, cmd response 0x900, card status 0x0 [ 30.788973] blk_update_request: I/O error, dev mmcblk0, sector 3633189 [ 34.863312] mmcblk0: error -110 transferring data, sector 3633190, nr 226, cmd response 0x900, card status 0x0 [ 34.873632] blk_update_request: I/O error, dev mmcblk0, sector 3633190 [ 38.947827] mmcblk0: error -110 transferring data, sector 3633191, nr 225, cmd response 0x900, card status 0x0 [ 38.958190] blk_update_request: I/O error, dev mmcblk0, sector 3633191 [ 43.032570] mmcblk0: error -110 transferring data, sector 3633192, nr 224, cmd response 0x900, card status 0x0 [ 43.042894] blk_update_request: I/O error, dev mmcblk0, sector 3633192 [ 47.117284] mmcblk0: error -110 transferring data, sector 3633193, nr 223, cmd response 0x900, card status 0x0 [ 47.127606] blk_update_request: I/O error, dev mmcblk0, sector 3633193 [ 51.201842] mmcblk0: error -110 transferring data, sector 3633194, nr 222, cmd response 0x900, card status 0x0 [ 51.212185] blk_update_request: I/O error, dev mmcblk0, sector 3633194 [ 55.286521] mmcblk0: error -110 transferring data, sector 3633195, nr 221, cmd response 0x900, card status 0x0 [ 55.296842] blk_update_request: I/O error, dev mmcblk0, sector 3633195 [ 59.371078] mmcblk0: error -110 transferring data, sector 3633196, nr 220, cmd response 0x900, card status 0x0 [ 59.381398] blk_update_request: I/O error, dev mmcblk0, sector 3633196 [ 63.455632] mmcblk0: error -110 transferring data, sector 3633197, nr 219, cmd response 0x900, card status 0x0 [ 63.465952] blk_update_request: I/O error, dev mmcblk0, sector 3633197 [ 67.540141] mmcblk0: error -110 transferring data, sector 3633198, nr 218, cmd response 0x900, card status 0x0 [ 67.550463] blk_update_request: I/O error, dev mmcblk0, sector 3633198 [ 71.624700] mmcblk0: error -110 transferring data, sector 3633199, nr 217, cmd response 0x900, card status 0x0 [ 71.635024] blk_update_request: I/O error, dev mmcblk0, sector 3633199 [ 75.709221] mmcblk0: error -110 transferring data, sector 3633200, nr 216, cmd response 0x900, card status 0x0 [ 75.719542] blk_update_request: I/O error, dev mmcblk0, sector 3633200 [ 79.793790] mmcblk0: error -110 transferring data, sector 3633201, nr 215, cmd response 0x900, card status 0x0 [ 79.804113] blk_update_request: I/O error, dev mmcblk0, sector 3633201

[PYBOOT] [cosmic 01:58]: Timed out waiting for "<type 'str'>":

[PYBOOT] [cosmic 01:59]: got exception: timeout ~$off

[PYBOOT] [cosmic 02:00]: Done. Board cosmic-arm-multi_v7_defconfig failure log: -------------------------------------------------

[ 14.082183] blk_update_request: I/O error, dev mmcblk0, sector 3633185 [ 18.156170] mmcblk0: error -110 transferring data, sector 3633186, nr 230, cmd response 0x900, card status 0x0 [ 18.166243] blk_update_request: I/O error, dev mmcblk0, sector 3633186 [ 22.240225] mmcblk0: error -110 transferring data, sector 3633187, nr 229, cmd response 0x900, card status 0x0 [ 22.250304] blk_update_request: I/O error, dev mmcblk0, sector 3633187 [ 26.324285] mmcblk0: error -110 transferring data, sector 3633188, nr 228, cmd response 0x900, card status 0x0 [ 26.334364] blk_update_request: I/O error, dev mmcblk0, sector 3633188 [ 30.408344] mmcblk0: error -110 transferring data, sector 3633189, nr 227, cmd response 0x900, card status 0x0 [ 30.418422] blk_update_request: I/O error, dev mmcblk0, sector 3633189 [ 34.492405] mmcblk0: error -110 transferring data, sector 3633190, nr 226, cmd response 0x900, card status 0x0 [ 34.502484] blk_update_request: I/O error, dev mmcblk0, sector 3633190 [ 38.576472] mmcblk0: error -110 transferring data, sector 3633191, nr 225, cmd response 0x900, card status 0x0 [ 38.586538] blk_update_request: I/O error, dev mmcblk0, sector 3633191 [ 42.660603] mmcblk0: error -110 transferring data, sector 3633192, nr 224, cmd response 0x900, card status 0x0 [ 42.670675] blk_update_request: I/O error, dev mmcblk0, sector 3633192 [ 46.744654] mmcblk0: error -110 transferring data, sector 3633193, nr 223, cmd response 0x900, card status 0x0 [ 46.754728] blk_update_request: I/O error, dev mmcblk0, sector 3633193 [ 50.828717] mmcblk0: error -110 transferring data, sector 3633194, nr 222, cmd response 0x900, card status 0x0 [ 50.838787] blk_update_request: I/O error, dev mmcblk0, sector 3633194 [ 54.912773] mmcblk0: error -110 transferring data, sector 3633195, nr 221, cmd response 0x900, card status 0x0 [ 54.922847] blk_update_request: I/O error, dev mmcblk0, sector 3633195 [ 58.996830] mmcblk0: error -110 transferring data, sector 3633196, nr 220, cmd response 0x900, card status 0x0 [ 59.006924] blk_update_request: I/O error, dev mmcblk0, sector 3633196 [ 63.080913] mmcblk0: error -110 transferring data, sector 3633197, nr 219, cmd response 0x900, card status 0x0 [ 63.090985] blk_update_request: I/O error, dev mmcblk0, sector 3633197 [ 67.164967] mmcblk0: error -110 transferring data, sector 3633198, nr 218, cmd response 0x900, card status 0x0 [ 67.175045] blk_update_request: I/O error, dev mmcblk0, sector 3633198 [ 71.249026] mmcblk0: error -110 transferring data, sector 3633199, nr 217, cmd response 0x900, card status 0x0 [ 71.259105] blk_update_request: I/O error, dev mmcblk0, sector 3633199 [ 75.333090] mmcblk0: error -110 transferring data, sector 3633200, nr 216, cmd response 0x900, card status 0x0 [ 75.343165] blk_update_request: I/O error, dev mmcblk0, sector 3633200 [ 79.417150] mmcblk0: error -110 transferring data, sector 3633201, nr 215, cmd response 0x900, card status 0x0 [ 79.427233] blk_update_request: I/O error, dev mmcblk0, sector 3633201

[PYBOOT] [cosmic 02:10]: Timed out waiting for "<type 'str'>":

[PYBOOT] [cosmic 02:11]: got exception: timeout ~$off

[PYBOOT] [cosmic 02:12]: Done. Board cosmic-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------

[ 13.877540] blk_update_request: I/O error, dev mmcblk0, sector 3633185 [ 17.951456] mmcblk0: error -110 transferring data, sector 3633186, nr 230, cmd response 0x900, card status 0x0 [ 17.961514] blk_update_request: I/O error, dev mmcblk0, sector 3633186 [ 22.035430] mmcblk0: error -110 transferring data, sector 3633187, nr 229, cmd response 0x900, card status 0x0 [ 22.045485] blk_update_request: I/O error, dev mmcblk0, sector 3633187 [ 26.119404] mmcblk0: error -110 transferring data, sector 3633188, nr 228, cmd response 0x900, card status 0x0 [ 26.129458] blk_update_request: I/O error, dev mmcblk0, sector 3633188 [ 30.203373] mmcblk0: error -110 transferring data, sector 3633189, nr 227, cmd response 0x900, card status 0x0 [ 30.213433] blk_update_request: I/O error, dev mmcblk0, sector 3633189 [ 34.287351] mmcblk0: error -110 transferring data, sector 3633190, nr 226, cmd response 0x900, card status 0x0 [ 34.297425] blk_update_request: I/O error, dev mmcblk0, sector 3633190 [ 38.371350] mmcblk0: error -110 transferring data, sector 3633191, nr 225, cmd response 0x900, card status 0x0 [ 38.381412] blk_update_request: I/O error, dev mmcblk0, sector 3633191 [ 42.455333] mmcblk0: error -110 transferring data, sector 3633192, nr 224, cmd response 0x900, card status 0x0 [ 42.465393] blk_update_request: I/O error, dev mmcblk0, sector 3633192 [ 46.539306] mmcblk0: error -110 transferring data, sector 3633193, nr 223, cmd response 0x900, card status 0x0 [ 46.549355] blk_update_request: I/O error, dev mmcblk0, sector 3633193 [ 50.623268] mmcblk0: error -110 transferring data, sector 3633194, nr 222, cmd response 0x900, card status 0x0 [ 50.633318] blk_update_request: I/O error, dev mmcblk0, sector 3633194 [ 54.707230] mmcblk0: error -110 transferring data, sector 3633195, nr 221, cmd response 0x900, card status 0x0 [ 54.717283] blk_update_request: I/O error, dev mmcblk0, sector 3633195 [ 58.791194] mmcblk0: error -110 transferring data, sector 3633196, nr 220, cmd response 0x900, card status 0x0 [ 58.801248] blk_update_request: I/O error, dev mmcblk0, sector 3633196 [ 62.875166] mmcblk0: error -110 transferring data, sector 3633197, nr 219, cmd response 0x900, card status 0x0 [ 62.885228] blk_update_request: I/O error, dev mmcblk0, sector 3633197 [ 66.959142] mmcblk0: error -110 transferring data, sector 3633198, nr 218, cmd response 0x900, card status 0x0 [ 66.969195] blk_update_request: I/O error, dev mmcblk0, sector 3633198 [ 71.043112] mmcblk0: error -110 transferring data, sector 3633199, nr 217, cmd response 0x900, card status 0x0 [ 71.053169] blk_update_request: I/O error, dev mmcblk0, sector 3633199 [ 75.127088] mmcblk0: error -110 transferring data, sector 3633200, nr 216, cmd response 0x900, card status 0x0 [ 75.137150] blk_update_request: I/O error, dev mmcblk0, sector 3633200 [ 79.211066] mmcblk0: error -110 transferring data, sector 3633201, nr 215, cmd response 0x900, card status 0x0 [ 79.221124] blk_update_request: I/O error, dev mmcblk0, sector 3633201

[PYBOOT] [cosmic 02:10]: Timed out waiting for "<type 'str'>":

[PYBOOT] [cosmic 02:11]: got exception: timeout ~$off

[PYBOOT] [cosmic 02:12]: Done. Board dalmore-arm-multi_lpae_defconfig failure log: -------------------------------------------------

[ 2.485096] Key type dns_resolver registered [ 2.491468] ThumbEE CPU extension supported. [ 2.495902] Registering SWP/SWPB emulation handler [ 2.545127] vdd-sys-5v0: supplied by vdd_ac_bat [ 2.551242] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 2.560189] vdd_hdmi_5v0: supplied by vdd-sys-5v0 [ 2.575821] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.582704] [drm] No driver support for vblank timestamp query. [ 2.594103] mmc1: new high speed MMC card at address 0001 [ 2.602419] mmcblk1: mmc1:0001 SEM32G 29.1 GiB [ 2.608172] mmcblk1boot0: mmc1:0001 SEM32G partition 1 4.00 MiB [ 2.616145] mmcblk1boot1: mmc1:0001 SEM32G partition 2 4.00 MiB [ 2.624156] mmcblk1rpmb: mmc1:0001 SEM32G partition 3 4.00 MiB [ 2.634279] mmcblk1: p1 [ 2.760938] Console: switching to colour frame buffer device 240x75 [ 2.847397] drm drm: fb0: frame buffer device [ 2.869876] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 2.879997] usb2_vbus: supplied by vdd-sys-5v0 [ 2.890638] tegra-ehci 7d008000.usb: EHCI Host Controller [ 2.896235] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 2.905073] tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 [ 2.919911] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 2.930294] hub 1-0:1.0: USB hub found [ 2.934313] hub 1-0:1.0: 1 port detected [ 2.944334] input: gpio-keys as /devices/soc0/gpio-keys/input/input0 [ 2.958310] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 3.020471] dvdd_ts: disabling [ 3.023569] usb1_vbus: disabling [ 3.026927] vdd_cam_1v8_reg: disabling [ 3.034341] Waiting for root device /dev/mmcblk0p1... [ 3.244919] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 4.201785] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f [ 61.795065] random: nonblocking pool is initialized

[PYBOOT] [dalmore 01:59]: Timed out waiting for "<type 'str'>":

[PYBOOT] [dalmore 02:00]: got exception: timeout ~$off

[PYBOOT] [dalmore 02:01]: Done. Board dalmore-arm-multi_v7_defconfig failure log: -------------------------------------------------

[ 2.485347] Key type dns_resolver registered [ 2.491718] ThumbEE CPU extension supported. [ 2.496136] Registering SWP/SWPB emulation handler [ 2.547955] vdd-sys-5v0: supplied by vdd_ac_bat [ 2.554152] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 2.562091] vdd_hdmi_5v0: supplied by vdd-sys-5v0 [ 2.577824] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.584719] [drm] No driver support for vblank timestamp query. [ 2.598247] mmc1: new high speed MMC card at address 0001 [ 2.607583] mmcblk1: mmc1:0001 SEM32G 29.1 GiB [ 2.614288] mmcblk1boot0: mmc1:0001 SEM32G partition 1 4.00 MiB [ 2.622482] mmcblk1boot1: mmc1:0001 SEM32G partition 2 4.00 MiB [ 2.629541] mmcblk1rpmb: mmc1:0001 SEM32G partition 3 4.00 MiB [ 2.639224] mmcblk1: p1 [ 2.763160] Console: switching to colour frame buffer device 240x75 [ 2.849621] drm drm: fb0: frame buffer device [ 2.870027] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 2.880083] usb2_vbus: supplied by vdd-sys-5v0 [ 2.890741] tegra-ehci 7d008000.usb: EHCI Host Controller [ 2.896337] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 2.905316] tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 [ 2.920062] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 2.930386] hub 1-0:1.0: USB hub found [ 2.934465] hub 1-0:1.0: 1 port detected [ 2.945468] input: gpio-keys as /devices/soc0/gpio-keys/input/input0 [ 2.959532] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 3.021491] dvdd_ts: disabling [ 3.024591] usb1_vbus: disabling [ 3.027963] vdd_cam_1v8_reg: disabling [ 3.035544] Waiting for root device /dev/mmcblk0p1... [ 3.245066] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 4.211966] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f [ 62.050021] random: nonblocking pool is initialized

[PYBOOT] [dalmore 02:03]: Timed out waiting for "<type 'str'>":

[PYBOOT] [dalmore 02:04]: got exception: timeout ~$off

[PYBOOT] [dalmore 02:05]: Done. Board dalmore-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------

[ 2.037109] can: broadcast manager protocol (rev 20120528 t) [ 2.042866] can: netlink gateway (rev 20130117) max_hops=1 [ 2.049535] Key type dns_resolver registered [ 2.054641] ThumbEE CPU extension supported. [ 2.086698] vdd-sys-5v0: supplied by vdd_ac_bat [ 2.091634] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 2.101713] vdd_hdmi_5v0: supplied by vdd-sys-5v0 [ 2.122773] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.129456] [drm] No driver support for vblank timestamp query. [ 2.292783] Console: switching to colour frame buffer device 240x75 [ 2.380309] drm drm: fb0: frame buffer device [ 2.384994] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 2.393199] usb2_vbus: supplied by vdd-sys-5v0 [ 2.402134] tegra-ehci 7d008000.usb: EHCI Host Controller [ 2.407700] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 2.415607] mmc1: new high speed MMC card at address 0001 [ 2.422264] mmcblk1: mmc1:0001 SEM32G 29.1 GiB [ 2.427292] mmcblk1boot0: mmc1:0001 SEM32G partition 1 4.00 MiB [ 2.434017] tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 [ 2.440152] mmcblk1boot1: mmc1:0001 SEM32G partition 2 4.00 MiB [ 2.446538] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 2.452676] mmcblk1rpmb: mmc1:0001 SEM32G partition 3 4.00 MiB [ 2.460447] mmcblk1: p1 [ 2.465454] hub 1-0:1.0: USB hub found [ 2.472449] hub 1-0:1.0: 1 port detected [ 2.482143] input: gpio-keys as /devices/soc0/gpio-keys/input/input0 [ 2.493481] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 2.533946] dvdd_ts: disabling [ 2.537101] usb1_vbus: disabling [ 2.540382] vdd_cam_1v8_reg: disabling [ 2.545885] Waiting for root device /dev/mmcblk0p1... [ 2.785346] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 3.739358] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f

[PYBOOT] [dalmore 01:48]: Timed out waiting for "<type 'str'>":

[PYBOOT] [dalmore 01:49]: got exception: timeout ~$off

[PYBOOT] [dalmore 01:51]: Done. Board dalmore-arm-tegra_defconfig failure log: -------------------------------------------------

[ 2.638969] Bluetooth: RFCOMM ver 1.11 [ 2.642942] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 2.648340] Bluetooth: BNEP socket layer initialized [ 2.653428] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 2.659429] Bluetooth: HIDP socket layer initialized [ 2.666399] Key type dns_resolver registered [ 2.676016] Registering SWP/SWPB emulation handler [ 2.706461] vdd-sys-5v0: supplied by vdd_ac_bat [ 2.713756] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 2.722678] vdd_hdmi_5v0: supplied by vdd-sys-5v0 [ 2.748076] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.754878] [drm] No driver support for vblank timestamp query. [ 2.932710] Console: switching to colour frame buffer device 240x75 [ 3.019144] drm drm: fb0: frame buffer device [ 3.051573] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.058773] usb2_vbus: supplied by vdd-sys-5v0 [ 3.068228] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.074032] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 3.083175] tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 [ 3.101835] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 3.115999] hub 1-0:1.0: USB hub found [ 3.120026] hub 1-0:1.0: 1 port detected [ 3.133842] input: gpio-keys as /devices/soc0/gpio-keys/input/input1 [ 3.148978] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:01 UTC (946684801) [ 3.245185] dvdd_ts: disabling [ 3.248289] usb1_vbus: disabling [ 3.251673] vdd_cam_1v8_reg: disabling [ 3.256340] ALSA device list: [ 3.259330] #0: NVIDIA Tegra Dalmore [ 3.265265] Waiting for root device /dev/mmcblk0p1... [ 3.441595] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 4.476166] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f [ 47.231564] random: nonblocking pool is initialized

[PYBOOT] [dalmore 01:45]: Timed out waiting for "<type 'str'>":

[PYBOOT] [dalmore 01:46]: got exception: timeout ~$off

[PYBOOT] [dalmore 01:48]: Done. Board odroidu3-arm-exynos_defconfig failure log: -------------------------------------------------

[ 1.650413] dwmmc_exynos 12550000.mmc: DW MMC controller at irq 107,32 bit host data width,128 deep fifo [ 1.657975] usb 1-3: new high-speed USB device number 2 using exynos-ehci [ 1.666880] dwmmc_exynos 12550000.mmc: allocated mmc-pwrseq [ 1.698018] dwmmc_exynos 12550000.mmc: 1 slots initialized [ 1.699270] usbcore: registered new interface driver usbhid [ 1.704432] usbhid: USB HID core driver [ 1.713207] NET: Registered protocol family 10 [ 1.713828] sit: IPv6 over IPv4 tunneling driver [ 1.717060] NET: Registered protocol family 17 [ 1.721076] NET: Registered protocol family 15 [ 1.725531] Key type dns_resolver registered [ 1.729856] Registering SWP/SWPB emulation handler [ 1.735694] s3c-rtc 10070000.rtc: rtc disabled, re-enabling [ 1.740269] s3c-rtc 10070000.rtc: rtc core: registered s3c as rtc1 [ 1.768534] max98090 1-0010: MAX98090 REVID=0x43 [ 1.770797] max98090 1-0010: use default 2.8v micbias [ 1.778041] asoc-simple-card sound: HiFi <-> 3830000.i2s mapping ok [ 1.780887] input: gpio_keys as /devices/platform/gpio_keys/input/input0 [ 1.786134] mmc_host mmc1: Bus speed (slot 0) = 44000000Hz (slot req 52000000Hz, actual 44000000HZ div = 0) [ 1.795617] mmc_host mmc1: Bus speed (slot 0) = 73333333Hz (slot req 52000000Hz, actual 36666666HZ div = 1) [ 1.805324] mmc1: new DDR MMC card at address 0001 [ 1.810341] mmcblk1: mmc1:0001 008G92 7.28 GiB [ 1.814420] mmcblk1boot0: mmc1:0001 008G92 partition 1 4.00 MiB [ 1.820079] max77686-rtc max77686-rtc: setting system clock to 2000-01-01 01:00:19 UTC (946688419) [ 1.829348] mmcblk1boot1: mmc1:0001 008G92 partition 2 4.00 MiB [ 1.835230] mmcblk1rpmb: mmc1:0001 008G92 partition 3 512 KiB [ 1.838036] VDD10_HDMI_1.0V: disabling [ 1.838704] vdd_g3d: disabling [ 1.839348] BUCK8_2.8V: disabling [ 1.840o55] ALSA device list: [ 1.840759] #0: Odroid-U3 [ 1.857673] mmcblk1: p1 p2 [ 1.861982] Waiting for root device /dev/mmcblk0p2...

[PYBOOT] [odroidu3 01:45]: Timed out waiting for "<type 'str'>":

[PYBOOT] [odroidu3 01:46]: got exception: timeout ~$off

[PYBOOT] [odroidu3 01:47]: Done. Board snow-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------

[....] Waiting for /dev to be fully populated...[?25l[?1c7[ ok 8[?25h[?0cdone. [....] Activating swap...[?25l[?1c7[ ok 8[?25h[?0cdone. [ 3.204783] EXT4-fs (mmcblk0p3): warning: mounting fs with errors, running e2fsck is recommended [ 3.213153] EXT4-fs (mmcblk0p3): re-mounted. Opts: (null) [....] Cleaning up temporary files... /tmp[?25l[?1c7[ ok 8[?25h[?0c. [....] Activating lvm and md swap...[?25l[?1c7[ ok 8[?25h[?0cdone. [....] Checking file systems...fsck from util-linux 2.20.1 [?25l[?1c7[ ok 8[?25h[?0cdone. [....] Mounting local filesystems...[?25l[?1c7[ ok 8[?25h[?0cdone. [....] Activating swapfile swap...[?25l[?1c7[ ok 8[?25h[?0cdone. [....] Cleaning up temporary files...[?25l[?1c7[ ok 8[?25h[?0c. [....] Setting kernel variables ...[?25l[?1c7[ ok 8[?25h[?0cdone. [ 4.265763] random: dd urandom read with 57 bits of entropy available [....] Configuring network interfaces...Internet Systems Consortium DHCP Client 4.2.2 Copyright 2004-2011 Internet Systems Consortium. All rights reserved. For info, please visit https://www.isc.org/software/dhcp/

Cannot find device "eth0" Bind socket to interface: No such device Failed to bring up eth0. [?25l[?1c7[ ok 8[?25h[?0cdone. [....] Cleaning up temporary files...[?25l[?1c7[ ok 8[?25h[?0c. INIT: Entering runlevel: 2 [info] Using makefile-style concurrent boot in runlevel 2. [....] Starting enhanced syslogd: rsyslogd[?25l[?1c7[ ok 8[?25h[?0c. [....] Starting web server: apache2apache2: Could not reliably determine the server's fully qualified domain name, using 127.0.0.1 for ServerName [?25l[?1c7[ ok 8[?25h[?0c. [....] Starting periodic command scheduler: cron[?25l[?1c7[ ok 8[?25h[?0c. [....] Starting system message bus: dbus[?25l[?1c7[ ok 8[?25h[?0c. [....] Loading cpufreq kernel modules...[?25l[?1c7[ ok 8[?25h[?0cdone (none). [....] CPUFreq Utilities: Setting ondemand CPUFreq governor...CPU0...[?25l[?1c7[ ok 8[?25h[?0cdone. [....] Starting OpenBSD Secure Shell server: sshd[?25l[?1c7[ ok 8[?25h[?0c.

[PYBOOT] [snow 03:10]: Timed out waiting for "<type 'str'>":

[PYBOOT] [snow 03:11]: got exception: timeout ~$off

[PYBOOT] [snow 03:12]: Done. Board snowball-arm-multi_v7_defconfig failure log: -------------------------------------------------

[ 1.971008] can: controller area network core (rev 20120528 abi 9) [ 1.977325] NET: Registered protocol family 29 [ 1.981842] can: raw protocol (rev 20120528) [ 1.986145] can: broadcast manager protocol (rev 20120528 t) [ 1.991851] can: netlink gateway (rev 20130117) max_hops=1 [ 1.998229] Key type dns_resolver registered [ 2.002868] ThumbEE CPU extension supported. [ 2.007232] Registering SWP/SWPB emulation handler [ 2.015045] input: gpio_keys as /devices/soc0/gpio_keys/input/input0 [ 2.021820] rtc-pl031 80154000.rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 2.030975] thermal cooling_device0: thermal-cpufreq-0 bind to 0: 0-succeed [ 2.037994] thermal cooling_device0: thermal-cpufreq-0 bind to 1: 0-succeed [ 2.044982] thermal cooling_device0: thermal-cpufreq-0 bind to 2: 0-succeed [ 2.051971] db8500-cpufreq-cooling soc:cpufreq-cooling: Cooling device registered: thermal-cpufreq-0 [ 2.053985] mmc3: new high speed MMC card at address 0001 [ 2.054504] mmcblk3: mmc3:0001 3.53 GiB [ 2.054718] mmcblk3boot0: mmc3:0001 partition 1 2.00 MiB [ 2.054901] mmcblk3boot1: mmc3:0001 partition 2 2.00 MiB [ 2.055084] mmcblk3rpmb: mmc3:0001 partition 3 128 KiB [ 2.065002] mmcblk3: p1 p2 p3 p4 [ 2.094116] db8500-esram12: disabling [ 2.097930] db8500-esram34: disabling [ 2.102447] V-CSI/DSI: disabling [ 2.105865] mmci-reg: disabling [ 2.110382] uart-pl011 80007000.uart: DMA channel TX dma0chan20 [ 2.116516] uart-pl011 80007000.uart: DMA channel RX dma0chan21 [ 2.122863] Waiting for root device /dev/mmcblk0p4... cu: Got hangup signal Connected. cu: waitpid: No child processes Connected.

Disconnected.

[PYBOOT] [snowball 02:14]: Timed out waiting for "<type 'str'>":

[PYBOOT] [snowball 02:15]: got exception: timeout ~$off

[PYBOOT] [snowball 02:16]: Done. Board snowball-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------

[ 1.903015] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.910522] ledtrig-cpu: registered to indicate activity on CPUs [ 1.916778] usbcore: registered new interface driver usbhid [ 1.922363] usbhid: USB HID core driver [ 1.929626] NET: Registered protocol family 10 [ 1.984954] sit: IPv6 over IPv4 tunneling driver [ 1.990112] NET: Registered protocol family 17 [ 1.994598] can: controller area network core (rev 20120528 abi 9) [ 2.000823] NET: Registered protocol family 29 [ 2.005279] can: raw protocol (rev 20120528) [ 2.009552] can: broadcast manager protocol (rev 20120528 t) [ 2.015197] can: netlink gateway (rev 20130117) max_hops=1 [ 2.021148] Key type dns_resolver registered [ 2.025604] ThumbEE CPU extension supported. [ 2.079956] input: gpio_keys as /devices/soc0/gpio_keys/input/input0 [ 2.094635] rtc-pl031 80154000.rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 2.103729] thermal cooling_device0: thermal-cpufreq-0 bind to 0: 0-succeed [ 2.110717] thermal cooling_device0: thermal-cpufreq-0 bind to 1: 0-succeed [ 2.117706] thermal cooling_device0: thermal-cpufreq-0 bind to 2: 0-succeed [ 2.124694] db8500-cpufreq-cooling soc:cpufreq-cooling: Cooling device registered: thermal-cpufreq-0 [ 2.136444] db8500-esram12: disabling [ 2.184234] db8500-esram34: disabling [ 2.207977] V-CSI/DSI: disabling [ 2.219207] mmci-reg: disabling [ 2.222808] uart-pl011 80007000.uart: DMA channel TX dma0chan20 [ 2.228790] uart-pl011 80007000.uart: DMA channel RX dma0chan21 [ 2.243957] Waiting for root device /dev/mmcblk0p4... [ 3.047821] mmc3: new high speed MMC card at address 0001 [ 3.059631] mmcblk3: mmc3:0001 3.53 GiB [ 3.069763] mmcblk3boot0: mmc3:0001 partition 1 2.00 MiB [ 3.079284] mmcblk3boot1: mmc3:0001 partition 2 2.00 MiB [ 3.093811] mmcblk3rpmb: mmc3:0001 partition 3 128 KiB [ 3.100616] mmcblk3: p1 p2 p3 p4

[PYBOOT] [snowball 01:57]: Timed out waiting for "<type 'str'>":

[PYBOOT] [snowball 01:58]: got exception: timeout ~$off

[PYBOOT] [snowball 02:00]: Done. Board snowball-arm-u8500_defconfig failure log: -------------------------------------------------

[ 2.640899] ux500-msp-i2s ux500-msp-i2s.1: Failed to get DMA channel capabilities, falling back to period counting: -6 [ 2.651611] snd-soc-mop500 snd-soc-mop500.0: ab8500-codec-dai.0 <-> ux500-msp-i2s.1 mapping ok [ 2.661529] ux500-msp-i2s ux500-msp-i2s.3: Failed to get DMA channel capabilities, falling back to period counting: -6 [ 2.672241] snd-soc-mop500 snd-soc-mop500.0: ab8500-codec-dai.1 <-> ux500-msp-i2s.3 mapping ok [ 2.695983] NET: Registered protocol family 10 [ 2.701568] sit: IPv6 over IPv4 tunneling driver [ 2.707092] NET: Registered protocol family 17 [ 2.711639] NET: Registered protocol family 35 [ 2.716156] NET: Registered protocol family 37 [ 2.720825] Registering SWP/SWPB emulation handler [ 2.727203] coresight-etm3x 801ae000.ptm: PTM 1.0 initialized [ 2.733489] coresight-etm3x 801af000.ptm: PTM 1.0 initialized [ 2.740112] input: gpio_keys as /devices/soc0/gpio_keys/input/input1 [ 2.747222] ab8500-rtc ab8500-rtc.0: setting system clock to 2000-03-30 15:03:48 UTC (954428628) [ 2.756500] thermal cooling_device0: thermal-cpufreq-0 bind to 0: 0-succeed [ 2.763488] thermal cooling_device0: thermal-cpufreq-0 bind to 1: 0-succeed [ 2.770507] thermal cooling_device0: thermal-cpufreq-0 bind to 2: 0-succeed [ 2.777465] db8500-cpufreq-cooling soc:cpufreq-cooling: Cooling device registered: thermal-cpufreq-0 [ 2.791229] db8500-esram12: disabling [ 2.794952] db8500-esram34: disabling [ 2.798889] V-CSI/DSI: disabling [ 2.802185] mmci-reg: disabling [ 2.805511] ALSA device list: [ 2.808471] #0: MOP500-card [ 2.811889] uart-pl011 80007000.uart: DMA channel TX dma0chan24 [ 2.817810] uart-pl011 80007000.uart: DMA channel RX dma0chan25 [ 2.824005] Waiting for root device /dev/mmcblk0p4... Connected. cu: Got hangup signal cu: waitpid: No child processes Connected.

Disconnected.

[PYBOOT] [snowball 01:57]: Timed out waiting for "<type 'str'>":

[PYBOOT] [snowball 01:58]: got exception: timeout ~$off

[PYBOOT] [snowball 01:59]: Done. Board wandboard-arm-imx_v6_v7_defconfig failure log: -------------------------------------------------

[ 20.076621] mmcblk0: error -110 sending status command, aborting INIT: cannot execute "/sbin/gett[ 20.087780] mmcblk0: error -110 sending status command, retrying y" INIT: Id "1" respawning too[ 20.096655] mmcblk0: error -110 sending status command, retrying fast: disabled for 5 minutes [ 20.105458] mmcblk0: error -110 sending status command, aborting INIT: INIT: cannot execute "/sbinï [ 20.143692] mmcblk0: error -110 sending status command, retrying [ 20.152196] mmcblk0: error -110 sending status command, retrying [ 20.160623] mmcblk0: error -110 sending status command, aborting [ 20.171653] mmcblk0: error -110 sending status command, retrying [ 20.180089] mmcblk0: error -110 sending status command, retrying [ 20.188516] mmcblk0: error -110 sending status command, aborting INIT: cannot execute "/sbin/getty" I[ 20.199604] mmcblk0: error -110 sending status command, retrying NIT: Id "2" respawning too fast: [ 20.208502] mmcblk0: error -110 sending status command, retrying disabled for 5 minutes [ 20.217296] mmcblk0: error -110 sending status command, aborting INIT: cannot execute "/sbin/getty" I[ 20.228468] mmcblk0: error -110 sending status command, retrying NIT: Id "S1" respawning too fast:[ 20.237261] mmcblk0: error -110 sending status command, retrying disabled for 5 minutes [ 20.246124] mmcblk0: error -110 sending status command, aborting INIT: cannot execute "/sbin/getty" INIT: cannot execute "/sbin/getty" INIT: Id "6" respawning to[ 20.261203] mmcblk0: error -110 sending status command, retrying o fast: disabled for 5 minutes [ 20.270070] mmcblk0: error -110 sending status command, retrying [ 20.278918] mmcblk0: error -110 sending status command, aborting INIT: cannot execute "/sbin/getty" INIT: Id "5" respawning too fast: disabled for 5 minutes INIT: no more processes left in this runlevel [ 51.945452] random: nonblocking pool is initialized

[PYBOOT] [wandboard 02:56]: Timed out waiting for "<type 'str'>":

[PYBOOT] [wandboard 02:57]: got exception: timeout ~$off

[PYBOOT] [wandboard 02:58]: Done.