Full logs are available at http://arm-soc.lixom.net/bootlogs/next/next-20160518/
Failed boards:
arndale arm-exynos_defconfig : FAILED 1:03.40 arndale arm-multi_v7_defconfig : FAILED 1:02.35 arndale arm-multi_lpae_defconfig : FAILED 1:09.99 arndale multi_v7_nosmp_defconfig : NO BUILD bbb multi_v7_nosmp_defconfig : NO BUILD beagleboard-x15 arm-omap2plus_defconfig : FAILED 0:55.53 beagleboard-x15 arm-multi_v7_defconfig : FAILED 0:57.72 beagleboard-x15 arm-multi_lpae_defconfig : FAILED 0:57.33 beagleboard-x15 multi_v7_nosmp_defconfig : NO BUILD beaver multi_v7_nosmp_defconfig : NO BUILD capri arm-bcm_defconfig : FAILED 1:49.80 capri arm-multi_v7_defconfig : FAILED 1:47.59 capri multi_v7_nosmp_defconfig : NO BUILD chitra powerpc-pasemi_defconfig : BUILD FAILED chitra powerpc-ppc64_defconfig : FAILED 1:50.22 colibri-vf61 multi_v7_nosmp_defconfig : NO BUILD colombus multi_v7_nosmp_defconfig : NO BUILD cosmic arm-imx_v6_v7_defconfig : FAILED 1:15.56 cosmic arm-multi_v7_defconfig : FAILED 2:04.15 cosmic multi_v7_nosmp_defconfig : NO BUILD cubie multi_v7_nosmp_defconfig : NO BUILD cubie2 multi_v7_nosmp_defconfig : NO BUILD cubox multi_v7_nosmp_defconfig : NO BUILD dalmore multi_v7_nosmp_defconfig : NO BUILD hummingboard arm-imx_v6_v7_defconfig : FAILED 1:05.08 hummingboard arm-multi_v7_defconfig : FAILED 1:00.45 hummingboard multi_v7_nosmp_defconfig : NO BUILD jetsontk1 multi_v7_nosmp_defconfig : NO BUILD minnowmax minnowmax_defconfig : NO BUILD odroidu3 arm-exynos_defconfig : FAILED 1:51.76 omap5uevm arm-multi_v7_defconfig : FAILED 2:10.80 omap5uevm arm-multi_lpae_defconfig : FAILED 2:09.46 omap5uevm multi_v7_nosmp_defconfig : NO BUILD pandaes arm-omap2plus_defconfig : FAILED 2:21.56 pandaes arm-multi_v7_defconfig : FAILED 2:24.29 pandaes multi_v7_nosmp_defconfig : NO BUILD parallella multi_v7_nosmp_defconfig : NO BUILD pi arm-exynos_defconfig : FAILED 1:46.26 pi arm-multi_v7_defconfig : FAILED 1:48.93 pi arm-multi_lpae_defconfig : FAILED 1:55.23 pi multi_v7_nosmp_defconfig : NO BUILD pit arm-exynos_defconfig : FAILED 1:47.27 pit arm-multi_v7_defconfig : FAILED 1:52.71 pit arm-multi_lpae_defconfig : FAILED 1:54.59 pit multi_v7_nosmp_defconfig : NO BUILD rk3288evb multi_v7_nosmp_defconfig : NO BUILD seaboard multi_v7_nosmp_defconfig : NO BUILD snow arm-exynos_defconfig : FAILED 2:02.12 snow arm-multi_v7_defconfig : FAILED 2:03.13 snow arm-multi_lpae_defconfig : FAILED 2:02.63 snow multi_v7_nosmp_defconfig : NO BUILD snowball multi_v7_nosmp_defconfig : NO BUILD socfpga multi_v7_nosmp_defconfig : NO BUILD trimslice multi_v7_nosmp_defconfig : NO BUILD wandboard arm-imx_v6_v7_defconfig : FAILED 1:00.11 wandboard arm-multi_v7_defconfig : FAILED 1:01.52 wandboard multi_v7_nosmp_defconfig : NO BUILD
Successful boards:
apc arm-vt8500_v6_v7_defconfig : passed 1:15.63 bbb arm-omap2plus_defconfig : passed 1:43.95 bbb arm-multi_v7_defconfig : passed 1:15.24 colombus arm-sunxi_defconfig : passed 2:18.43 colombus arm-multi_v7_defconfig : passed 2:41.15 colombus arm-multi_lpae_defconfig : passed 2:34.87 cubie arm-sunxi_defconfig : passed 0:52.03 cubie arm-multi_v7_defconfig : passed 0:54.52 cubie2 arm-sunxi_defconfig : passed 0:50.31 cubie2 arm-multi_v7_defconfig : passed 0:59.16 cubie2 arm-multi_lpae_defconfig : passed 0:48.83 cubox arm-multi_v7_defconfig : passed 1:13.32 cubox arm-mvebu_v7_defconfig : passed 0:59.92 dalmore arm-tegra_defconfig : warnings 1:26.97 dalmore arm-multi_v7_defconfig : warnings 1:32.03 dalmore arm-multi_lpae_defconfig : warnings 1:28.90 jetsontk1 arm-tegra_defconfig : warnings 0:51.17 jetsontk1 arm-multi_v7_defconfig : warnings 0:50.87 jetsontk1 arm-multi_lpae_defconfig : warnings 0:52.39 omap5uevm arm-omap2plus_defconfig : passed 1:06.41 seattle arm64-defconfig : passed 2:20.46 snowball arm-u8500_defconfig : passed 1:07.52 snowball arm-multi_v7_defconfig : passed 1:09.42 trimslice arm-tegra_defconfig : warnings 2:50.85 trimslice arm-multi_v7_defconfig : warnings 1:32.15
Offline boards:
beaver arm-tegra_defconfig : OFFLINE 2:12.30 beaver arm-multi_v7_defconfig : OFFLINE 2:14.17 colibri-vf61 arm-imx_v6_v7_defconfig : OFFLINE 2:12.61 colibri-vf61 arm-multi_v7_defconfig : OFFLINE 2:17.84 parallella arm-multi_v7_defconfig : OFFLINE 2:14.19 rk3288evb arm-multi_v7_defconfig : OFFLINE 0:44.05 rk3288evb arm-multi_lpae_defconfig : OFFLINE 0:43.06 sama5 arm-sama5_defconfig : OFFLINE 2:16.83 sama5d3-xplained arm-sama5_defconfig : OFFLINE 2:11.76 seaboard arm-tegra_defconfig : OFFLINE 2:18.37 seaboard arm-multi_v7_defconfig : OFFLINE 2:15.19 socfpga arm-socfpga_defconfig : OFFLINE 2:20.26 socfpga arm-multi_v7_defconfig : OFFLINE 2:12.78
Board legend is available at http://arm-soc.lixom.net/boards.html
Board arndale-arm-exynos_defconfig failure log: -------------------------------------------------
[ 3.993764] mmcblk1boot1: mmc1:0001 M4G1FA partition 2 1.00 MiB [ 3.999340] mmcblk1rpmb: mmc1:0001 M4G1FA partition 3 128 KiB [ 4.005914] mmcblk1: p1 [ 4.009601] EXT4-fs (mmcblk0p1): mounting ext3 file system using the ext4 subsystem [ 4.030036] EXT4-fs (mmcblk0p1): recovery complete [ 4.033371] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 4.041451] VFS: Mounted root (ext3 filesystem) on device 179:1. [ 4.048111] devtmpfs: error mounting -2 [ 4.051676] Freeing unused kernel memory: 1024K (c0a00000 - c0b00000) [ 4.057811] Kernel pan [PYBOOT] [arndale 01:00]: kernel: finished booting, starting userspace. ic - not syncing: No working init found. Try passing init= option to kernel. See Linux Documentation/init.txt for guidance. [ 4.070759] CPU: 1 PID: 1 Comm: swapper/0 Not tainted 4.6.0-next-20160518 #1 [ 4.077787] Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) [ 4.083877] [<c010dfec>] (unwind_backtrace) from [<c010ad18>] (show_stack+0x10/0x14) [ 4.091594] [<c010ad18>] (show_stack) from [<c0327038>] (dump_stack+0x78/0x8c) [ 4.098798] [<c0327038>] (dump_stack) from [<c0197588>] (panic+0xd8/0x250) [ 4.105658] [<c0197588>] (panic) from [<c06d18a0>] (kernel_init+0x104/0x114) [ 4.112686] [<c06d18a0>] (kernel_init) from [<c0107778>] (ret_from_fork+0x14/0x3c) [ 4.120247] CPU0: stopping [ 4.122928] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.6.0-next-20160518 #1 [ 4.129957] Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) [ 4.136041] [<c010dfec>] (unwind_backtrace) from [<c010ad18>] (show_stack+0x10/0x14) [ 4.143762] [<c010ad18>] (show_stack) from [<c0327038>] (dump_stack+0x78/0x8c) [ 4.150965] [<c0327038>] (dump_stack) from [<c010d2a8>] (handle_IPI+0x198/0x1ac) [ 4.158343] [<c010d2a8>] (handle_IPI) from [<c010150c>] (gic_handle_irq+0x94/0x98) [ 4.165894] [<c010150c>] (gic_handle_irq) from [<c010b7d4>] (__irq_svc+0x54/0x90) [ 4.173356] Exception stack(0xc0b01f30 to 0xc0b01f78) [ 4.178392] 1f20: 00000000 c0b2cd70 00000001 00000050 [ 4.186553] 1f40: f595c99f 00000000 f1dcc32d 00000000 eefac400 c0b2cd70 00000000 00000000 [ 4.194711] 1f60: 05355555 c0b01f80 c0516358 c05163cc 60000113 ffffffff [ 4.201311] [<c010b7d4>] (__irq_svc) from [<c05163cc>] (cpuidle_enter_state+0x1f4/0x24c) [ 4.209385] [<c05163cc>] (cpuidle_enter_state) from [<c0153010>] (cpu_startup_entry+0x190/0x238) [ 4.218152] [<c0153010>] (cpu_startup_entry) from [<c0a00c54>] (start_kernel+0x37c/0x388) [ 4.226314] ---[ end Kernel panic - not syncing: No working init found. Try passing init= option to kernel. See Linux Documentation/init.txt for guidance.
[PYBOOT] [arndale 01:01]: got exception: panic ~$off
[PYBOOT] [arndale 01:02]: Done. Board arndale-arm-multi_lpae_defconfig failure log: -------------------------------------------------
[ 2.234290] mmcblk1rpmb: mmc1:0001 M4G1FA partition 3 128 KiB [ 2.240868] mmcblk1: p1 [ 2.244494] ahci 122f0000.sata: couldn't get PHY in node sata: -517 [ 2.244672] EXT4-fs (mmcblk0p1): mounting ext3 file system using the ext4 subsystem [ 2.259043] EXT4-fs (mmcblk0p1): recovery complete [ 2.262359] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 2.270473] VFS: Mounted root (ext3 filesystem) on device 179:1. [ 2.277142] devtmpfs: error mounting -2 [ 2.281355] Freeing unused kernel memory: 2048K (c1100000 - c13000 [PYBOOT] [arndale 01:06]: kernel: finished booting, starting userspace. 00) [ 2.286851] Kernel panic - not syncing: No working init found. Try passing init= option to kernel. See Linux Documentation/init.txt for guidance. [ 2.299765] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.6.0-next-20160518 #1 [ 2.306792] Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) [ 2.312884] [<c031038c>] (unwind_backtrace) from [<c030b9b0>] (show_stack+0x10/0x14) [ 2.320602] [<c030b9b0>] (show_stack) from [<c0591d34>] (dump_stack+0x88/0x9c) [ 2.327805] [<c0591d34>] (dump_stack) from [<c03cbd04>] (panic+0xd8/0x264) [ 2.334665] [<c03cbd04>] (panic) from [<c0b84c88>] (kernel_init+0x104/0x114) [ 2.341694] [<c0b84c88>] (kernel_init) from [<c0307d78>] (ret_from_fork+0x14/0x3c) [ 2.349254] CPU1: stopping [ 2.351933] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 4.6.0-next-20160518 #1 [ 2.358960] Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) [ 2.365046] [<c031038c>] (unwind_backtrace) from [<c030b9b0>] (show_stack+0x10/0x14) [ 2.372770] [<c030b9b0>] (show_stack) from [<c0591d34>] (dump_stack+0x88/0x9c) [ 2.379974] [<c0591d34>] (dump_stack) from [<c030eb3c>] (handle_IPI+0x174/0x194) [ 2.387350] [<c030eb3c>] (handle_IPI) from [<c03017e0>] (gic_handle_irq+0x94/0x98) [ 2.394901] [<c03017e0>] (gic_handle_irq) from [<c030c514>] (__irq_svc+0x54/0x70) [ 2.402362] Exception stack(0xee099f68 to 0xee099fb0) [ 2.407399] 9f60: 00000000 c13c2e6c 2ddae000 00000050 8c0691a3 00000000 [ 2.415559] 9f80: 884e3de7 00000000 eefc2588 c13c2e6c 00000000 00000000 05355555 ee099fb8 [ 2.423716] 9fa0: c09c7df4 c09c7e68 60000013 ffffffff [ 2.428758] [<c030c514>] (__irq_svc) from [<c09c7e68>] (cpuidle_enter_state+0x1f4/0x24c) [ 2.436830] [<c09c7e68>] (cpuidle_enter_state) from [<c03791a4>] (cpu_startup_entry+0x180/0x218) [ 2.445593] [<c03791a4>] (cpu_startup_entry) from [<40301c8c>] (0x40301c8c) [ 2.452540] ---[ end Kernel panic - not syncing: No working init found. Try passing init= option to kernel. See Linux Documentation/init.txt for guidance.
[PYBOOT] [arndale 01:07]: got exception: panic ~$off
[PYBOOT] [arndale 01:08]: Done. Board arndale-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 2.220144] mmcblk1rpmb: mmc1:0001 M4G1FA partition 3 128 KiB [ 2.226700] mmcblk1: p1 [ 2.229952] ahci 122f0000.sata: couldn't get PHY in node sata: -517 [ 2.242942] EXT4-fs (mmcblk0p1): mounting ext3 file system using the ext4 subsystem [ 2.262820] EXT4-fs (mmcblk0p1): recovery complete [ 2.266133] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 2.274232] VFS: Mounted root (ext3 filesystem) on device 179:1. [ 2.280887] devtmpfs: error mounting -2 [ 2.284956] Freeing unused kernel memory: 2048K (c1100000 - c1300000) [ 2.290600] [PYBOOT] [arndale 00:59]: kernel: finished booting, starting userspace. Kernel panic - not syncing: No working init found. Try passing init= option to kernel. See Linux Documentation/init.txt for guidance. [ 2.303541] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.6.0-next-20160518 #1 [ 2.310568] Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) [ 2.316658] [<c031038c>] (unwind_backtrace) from [<c030b9b0>] (show_stack+0x10/0x14) [ 2.324377] [<c030b9b0>] (show_stack) from [<c0591d34>] (dump_stack+0x88/0x9c) [ 2.331581] [<c0591d34>] (dump_stack) from [<c03cbd04>] (panic+0xd8/0x264) [ 2.338440] [<c03cbd04>] (panic) from [<c0b84c88>] (kernel_init+0x104/0x114) [ 2.345470] [<c0b84c88>] (kernel_init) from [<c0307d78>] (ret_from_fork+0x14/0x3c) [ 2.353029] CPU1: stopping [ 2.355708] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 4.6.0-next-20160518 #1 [ 2.362737] Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) [ 2.368820] [<c031038c>] (unwind_backtrace) from [<c030b9b0>] (show_stack+0x10/0x14) [ 2.376544] [<c030b9b0>] (show_stack) from [<c0591d34>] (dump_stack+0x88/0x9c) [ 2.383749] [<c0591d34>] (dump_stack) from [<c030eb3c>] (handle_IPI+0x174/0x194) [ 2.391126] [<c030eb3c>] (handle_IPI) from [<c03017e0>] (gic_handle_irq+0x94/0x98) [ 2.398677] [<c03017e0>] (gic_handle_irq) from [<c030c514>] (__irq_svc+0x54/0x70) [ 2.406138] Exception stack(0xee099f68 to 0xee099fb0) [ 2.411174] 9f60: 00000000 c13c2e6c 2ddae000 00000050 8c402ed3 00000000 [ 2.419334] 9f80: 888753ac 00000000 eefc2588 c13c2e6c 00000000 00000000 05355555 ee099fb8 [ 2.427492] 9fa0: c09c7df4 c09c7e68 60000013 ffffffff [ 2.432533] [<c030c514>] (__irq_svc) from [<c09c7e68>] (cpuidle_enter_state+0x1f4/0x24c) [ 2.440603] [<c09c7e68>] (cpuidle_enter_state) from [<c03791a4>] (cpu_startup_entry+0x180/0x218) [ 2.449369] [<c03791a4>] (cpu_startup_entry) from [<40301c8c>] (0x40301c8c) [ 2.456315] ---[ end Kernel panic - not syncing: No working init found. Try passing init= option to kernel. See Linux Documentation/init.txt for guidance.
[PYBOOT] [arndale 01:00]: got exception: panic ~$off
[PYBOOT] [arndale 01:01]: Done. Board beagleboard-x15-arm-multi_lpae_defconfig failure log: -------------------------------------------------
################################################################# ################################################################# ################################################################# ######################## 2.4 MiB/s done Bytes transferred = 7023712 (6b2c60 hex) U-Boot# setenv serverip 172.16.20.2 setenv serverip 172.16.20.2 U-Boot# tftp 0x82000000 tmp/beagleboard-x15-KK_689/am57xx-beagle-x15.dtb tftp 0x82000000 tmp/beagleboard-x15-KK_689/am57xx-beagle-x15.dtb link up on port 0, speed 100, full duplex Using cpsw device TFTP from server 172.16.20.2; our IP address is 172.16.20.126 Filename 'tmp/beagleboard-x15-KK_689/am57xx-beagle-x15.dtb'. Load address: 0x82000000 Loading: *###### 2.5 MiB/s done Bytes transferred = 85516 (14e0c hex) U-Boot# bootz 0x81000000 - 0x82000000 ; bootm 0x81000000 - 0x82000000
[PYBOOT] [beagleboard-x15 00:19]: u-boot: jumping to kernel image bootz 0x81000000 - 0x82000000 ; bootm 0x81000000 - 0x82000000 Kernel image @ 0x81000000 [ 0x000000 - 0x6b2c60 ] ## Flattened Device Tree blob at 82000000 Booting using the fdt blob at 0x82000000 Loading Device Tree to 8ffe8000, end 8ffffe0b ... OK
Starting kernel ...
[PYBOOT] [beagleboard-x15 00:19]: u-boot: started kernel.
[PYBOOT] [beagleboard-x15 00:54]: Timed out waiting for "<type 'str'>":
[PYBOOT] [beagleboard-x15 00:55]: got exception: timeout ~$off
[PYBOOT] [beagleboard-x15 00:56]: Done. Board beagleboard-x15-arm-multi_v7_defconfig failure log: -------------------------------------------------
################################################################# ################################################################# ################################################################# ######################## 2.4 MiB/s done Bytes transferred = 7023712 (6b2c60 hex) U-Boot# setenv serverip 172.16.20.2 setenv serverip 172.16.20.2 U-Boot# tftp 0x82000000 tmp/beagleboard-x15-BR30L9/am57xx-beagle-x15.dtb tftp 0x82000000 tmp/beagleboard-x15-BR30L9/am57xx-beagle-x15.dtb link up on port 0, speed 100, full duplex Using cpsw device TFTP from server 172.16.20.2; our IP address is 172.16.20.126 Filename 'tmp/beagleboard-x15-BR30L9/am57xx-beagle-x15.dtb'. Load address: 0x82000000 Loading: *###### 2.4 MiB/s done Bytes transferred = 85516 (14e0c hex) U-Boot# bootz 0x81000000 - 0x82000000 ; bootm 0x81000000 - 0x82000000
[PYBOOT] [beagleboard-x15 00:20]: u-boot: jumping to kernel image bootz 0x81000000 - 0x82000000 ; bootm 0x81000000 - 0x82000000 Kernel image @ 0x81000000 [ 0x000000 - 0x6b2c60 ] ## Flattened Device Tree blob at 82000000 Booting using the fdt blob at 0x82000000 Loading Device Tree to 8ffe8000, end 8ffffe0b ... OK
Starting kernel ...
[PYBOOT] [beagleboard-x15 00:20]: u-boot: started kernel.
[PYBOOT] [beagleboard-x15 00:55]: Timed out waiting for "<type 'str'>":
[PYBOOT] [beagleboard-x15 00:56]: got exception: timeout ~$off
[PYBOOT] [beagleboard-x15 00:57]: Done. Board beagleboard-x15-arm-omap2plus_defconfig failure log: -------------------------------------------------
################################################################# ################################################################# ################################################################# # 2.4 MiB/s done Bytes transferred = 3820112 (3a4a50 hex) U-Boot# setenv serverip 172.16.20.2 setenv serverip 172.16.20.2 U-Boot# tftp 0x82000000 tmp/beagleboard-x15-obr6qv/am57xx-beagle-x15.dtb tftp 0x82000000 tmp/beagleboard-x15-obr6qv/am57xx-beagle-x15.dtb link up on port 0, speed 100, full duplex Using cpsw device TFTP from server 172.16.20.2; our IP address is 172.16.20.126 Filename 'tmp/beagleboard-x15-obr6qv/am57xx-beagle-x15.dtb'. Load address: 0x82000000 Loading: *###### 2.5 MiB/s done Bytes transferred = 85516 (14e0c hex) U-Boot# bootz 0x81000000 - 0x82000000 ; bootm 0x81000000 - 0x82000000
[PYBOOT] [beagleboard-x15 00:17]: u-boot: jumping to kernel image bootz 0x81000000 - 0x82000000 ; bootm 0x81000000 - 0x82000000 Kernel image @ 0x81000000 [ 0x000000 - 0x3a4a50 ] ## Flattened Device Tree blob at 82000000 Booting using the fdt blob at 0x82000000 Loading Device Tree to 8ffe8000, end 8ffffe0b ... OK
Starting kernel ...
[PYBOOT] [beagleboard-x15 00:17]: u-boot: started kernel.
[PYBOOT] [beagleboard-x15 00:53]: Timed out waiting for "<type 'str'>":
[PYBOOT] [beagleboard-x15 00:54]: got exception: timeout ~$off
[PYBOOT] [beagleboard-x15 00:55]: Done. Board capri-arm-bcm_defconfig failure log: -------------------------------------------------
[ 0.540000] mmc0: SDHCI controller on 3f1b0000.sdio [3f1b0000.sdio] using ADMA [ 0.560000] iosr1: voltage operation not allowed [ 0.560000] mmc1: Switching to 3.3V signalling voltage failed [ 0.600000] mmc1: SDHCI controller on 3f190000.sdio [3f190000.sdio] using ADMA [ 0.610000] NET: Registered protocol family 10 [ 0.610000] sit: IPv6 over IPv4 tunneling driver [ 0.610000] NET: Registered protocol family 17 [ 0.610000] NET: Registered protocol family 15 [ 0.610000] ThumbEE CPU extension supported. [ 0.620000] Registering SWP/SWPB emulation handler [ 0.650000] mmcldo1: disabling [ 0.650000] mmcldo2: disabling [ 0.650000] csr: disabling [ 0.650000] iosr2: disabling [ 0.660000] msr: disabling [ 0.660000] sdsr1: disabling [ 0.660000] sdsr2: disabling [ 0.660000] vsr: disabling [ 0.660000] gpldo1: disabling [ 0.670000] gpldo2: disabling [ 0.670000] gpldo3: disabling [ 0.670000] gpldo4: disabling [ 0.670000] gpldo5: disabling [ 0.670000] gpldo6: disabling [ 0.670000] ttyS0 - failed to request DMA [ 0.680000] Waiting for root device /dev/mmcblk0p8... [ 0.730000] mmc1: new high speed MMC card at address 0001 [ 0.730000] mmcblk1: mmc1:0001 016G4A 14.8 GiB [ 0.730000] mmcblk1boot0: mmc1:0001 016G4A partition 1 2.00 MiB [ 0.730000] mmcblk1boot1: mmc1:0001 016G4A partition 2 2.00 MiB [ 0.740000] mmcblk1rpmb: mmc1:0001 016G4A partition 3 256 KiB [ 0.740000] Alternate GPT is invalid, using primary GPT. [ 0.740000] mmcblk1: p1 p2 p3 p4 p5 p6 p7 p8
[PYBOOT] [capri 01:46]: Timed out waiting for "<type 'str'>":
[PYBOOT] [capri 01:47]: got exception: timeout ~$off
[PYBOOT] [capri 01:49]: Done. Board capri-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 0.640000] can: controller area network core (rev 20120528 abi 9) [ 0.645000] NET: Registered protocol family 29 [ 0.645000] can: raw protocol (rev 20120528) [ 0.645000] can: broadcast manager protocol (rev 20120528 t) [ 0.650000] can: netlink gateway (rev 20130117) max_hops=1 [ 0.650000] Key type dns_resolver registered [ 0.655000] ThumbEE CPU extension supported. [ 0.655000] Registering SWP/SWPB emulation handler [ 0.660000] hctosys: unable to open rtc device (rtc0) [ 0.680000] mmcldo1: disabling [ 0.690000] mmcldo2: disabling [ 0.695000] csr: disabling [ 0.695000] iosr2: disabling [ 0.700000] msr: disabling [ 0.700000] sdsr1: disabling [ 0.700000] sdsr2: disabling [ 0.705000] vsr: disabling [ 0.705000] gpldo1: disabling [ 0.705000] gpldo2: disabling [ 0.710000] gpldo3: disabling [ 0.710000] gpldo4: disabling [ 0.710000] gpldo5: disabling [ 0.715000] gpldo6: disabling [ 0.715000] ttyS0 - failed to request DMA [ 0.715000] Waiting for root device /dev/mmcblk0p8... [ 0.735000] mmc1: new high speed MMC card at address 0001 [ 0.735000] mmcblk1: mmc1:0001 016G4A 14.8 GiB [ 0.740000] mmcblk1boot0: mmc1:0001 016G4A partition 1 2.00 MiB [ 0.740000] mmcblk1boot1: mmc1:0001 016G4A partition 2 2.00 MiB [ 0.745000] mmcblk1rpmb: mmc1:0001 016G4A partition 3 256 KiB [ 0.745000] Alternate GPT is invalid, using primary GPT. [ 0.750000] mmcblk1: p1 p2 p3 p4 p5 p6 p7 p8 [ 38.840000] random: nonblocking pool is initialized
[PYBOOT] [capri 01:44]: Timed out waiting for "<type 'str'>":
[PYBOOT] [capri 01:45]: got exception: timeout ~$off
[PYBOOT] [capri 01:47]: Done. Board chitra-powerpc-ppc64_defconfig failure log: -------------------------------------------------
Building dt strings... Building dt structure... Device tree strings 0x00000000013a5000 -> 0x00000000013a53e3 Device tree struct 0x00000000013a6000 -> 0x00000000013aa000 Quiescing Open Firmware ... Booting Linux via __start() ... CPU maps initialized for 1 thread per core (thread shift is 0) Freed 28672 bytes for unused pacas -> smp_release_cpus() spinning_secondaries = 0 <- smp_release_cpus() Starting Linux ppc64 #1 SMP Tue May 17 21:36:05 PDT 2016 ----------------------------------------------------- ppc64_pft_size = 0x0 phys_mem_size = 0x100000000 dcache_line_size = 0x40 icache_line_size = 0x40 cpu_features = 0x0800020018500048 possible = 0x3fffffff18500649 always = 0x0000000018100040 cpu_user_features = 0xdc000802 0x00000000 mmu_features = 0x6e000001 firmware_features = 0x0000000000000000 htab_address = 0xc00000017c000000 htab_hash_mask = 0x7ffff ----------------------------------------------------- <- setup_system() Linux version 4.6.0-next-20160518 (build@brutus) (gcc version 6.1.0 (GCC) ) #1 SMP Tue May 17 21:36:05 PDT 2016 Top of RAM: 0x180000000, Total RAM: 0x100000000 Memory hole size: 2048MB numa: Initmem setup node 0 [mem 0x00000000-0x17fffffff] numa: NODE_DATA [mem 0x17bfd1b00-0x17bfdbfff]
[PYBOOT] [chitra 01:47]: Timed out waiting for "<type 'str'>":
[PYBOOT] [chitra 01:48]: got exception: timeout ~$off
[PYBOOT] [chitra 01:49]: Done. Board cosmic-arm-imx_v6_v7_defconfig failure log: -------------------------------------------------
=> setenv serverip 172.16.20.2 setenv serverip 172.16.20.2 => tftp 0x84000000 tmp/cosmic-BdEWl0/vf610-cosmic.dtb tftp 0x84000000 tmp/cosmic-BdEWl0/vf610-cosmic.dtb Using FEC device TFTP from server 172.16.20.2; our IP address is 172.16.20.114 Filename 'tmp/cosmic-BdEWl0/vf610-cosmic.dtb'. Load address: 0x84000000 Loading: *## 699.2 KiB/s done Bytes transferred = 15773 (3d9d hex) => bootm ${loadaddr} - 0x84000000
[PYBOOT] [cosmic 00:30]: u-boot: jumping to kernel image bootm ${loadaddr} - 0x84000000 ## Booting kernel from Legacy Image at 82000000 ... Image Name: Linux Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 6570928 Bytes = 6.3 MiB Load Address: 80008000 Entry Point: 80008000 Verifying Checksum ... OK ## Flattened Device Tree blob at 84000000 Booting using the fdt blob at 0x84000000 Loading Kernel Image ... OK Using Device Tree in place at 84000000, end 84006d9c Using machid 0xffffffff from environment
Starting kernel ...
[PYBOOT] [cosmic 00:37]: u-boot: started kernel.
[PYBOOT] [cosmic 01:12]: Timed out waiting for "<type 'str'>":
[PYBOOT] [cosmic 01:13]: got exception: timeout ~$off
[PYBOOT] [cosmic 01:15]: Done. Board cosmic-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 14.065436] blk_update_request: I/O error, dev mmcblk0, sector 3633185 [ 18.139419] mmcblk0: error -110 transferring data, sector 3633186, nr 230, cmd response 0x900, card status 0x0 [ 18.149495] blk_update_request: I/O error, dev mmcblk0, sector 3633186 [ 22.223476] mmcblk0: error -110 transferring data, sector 3633187, nr 229, cmd response 0x900, card status 0x0 [ 22.233553] blk_update_request: I/O error, dev mmcblk0, sector 3633187 [ 26.307535] mmcblk0: error -110 transferring data, sector 3633188, nr 228, cmd response 0x900, card status 0x0 [ 26.317615] blk_update_request: I/O error, dev mmcblk0, sector 3633188 [ 30.391603] mmcblk0: error -110 transferring data, sector 3633189, nr 227, cmd response 0x900, card status 0x0 [ 30.401683] blk_update_request: I/O error, dev mmcblk0, sector 3633189 [ 34.475669] mmcblk0: error -110 transferring data, sector 3633190, nr 226, cmd response 0x900, card status 0x0 [ 34.485752] blk_update_request: I/O error, dev mmcblk0, sector 3633190 [ 38.559737] mmcblk0: error -110 transferring data, sector 3633191, nr 225, cmd response 0x900, card status 0x0 [ 38.569833] blk_update_request: I/O error, dev mmcblk0, sector 3633191 [ 42.643830] mmcblk0: error -110 transferring data, sector 3633192, nr 224, cmd response 0x900, card status 0x0 [ 42.653903] blk_update_request: I/O error, dev mmcblk0, sector 3633192 [ 46.727889] mmcblk0: error -110 transferring data, sector 3633193, nr 223, cmd response 0x900, card status 0x0 [ 46.737962] blk_update_request: I/O error, dev mmcblk0, sector 3633193 [ 50.811949] mmcblk0: error -110 transferring data, sector 3633194, nr 222, cmd response 0x900, card status 0x0 [ 50.822022] blk_update_request: I/O error, dev mmcblk0, sector 3633194 [ 54.896004] mmcblk0: error -110 transferring data, sector 3633195, nr 221, cmd response 0x900, card status 0x0 [ 54.906081] blk_update_request: I/O error, dev mmcblk0, sector 3633195 [ 58.980065] mmcblk0: error -110 transferring data, sector 3633196, nr 220, cmd response 0x900, card status 0x0 [ 58.990142] blk_update_request: I/O error, dev mmcblk0, sector 3633196 [ 63.064124] mmcblk0: error -110 transferring data, sector 3633197, nr 219, cmd response 0x900, card status 0x0 [ 63.074201] blk_update_request: I/O error, dev mmcblk0, sector 3633197 [ 67.148184] mmcblk0: error -110 transferring data, sector 3633198, nr 218, cmd response 0x900, card status 0x0 [ 67.158261] blk_update_request: I/O error, dev mmcblk0, sector 3633198 [ 71.232244] mmcblk0: error -110 transferring data, sector 3633199, nr 217, cmd response 0x900, card status 0x0 [ 71.242321] blk_update_request: I/O error, dev mmcblk0, sector 3633199 [ 75.316306] mmcblk0: error -110 transferring data, sector 3633200, nr 216, cmd response 0x900, card status 0x0 [ 75.326382] blk_update_request: I/O error, dev mmcblk0, sector 3633200 [ 79.400368] mmcblk0: error -110 transferring data, sector 3633201, nr 215, cmd response 0x900, card status 0x0 [ 79.410450] blk_update_request: I/O error, dev mmcblk0, sector 3633201
[PYBOOT] [cosmic 02:01]: Timed out waiting for "<type 'str'>":
[PYBOOT] [cosmic 02:02]: got exception: timeout ~$off
[PYBOOT] [cosmic 02:03]: Done. Board hummingboard-arm-imx_v6_v7_defconfig failure log: -------------------------------------------------
################################################################# ################################################################# ################################################################# ################################################################# ########################################################## 3.5 MiB/s done Bytes transferred = 6570928 (6443b0 hex) C1 U-Boot >setenv serverip 172.16.20.2 setenv serverip 172.16.20.2 C1 U-Boot > tftp 0x18000000 tmp/hummingboard-pS9nKY/imx6dl-hummingboard.dtb tftp 0x18000000 tmp/hummingboard-pS9nKY/imx6dl-hummingboard.dtb Using FEC device TFTP from server 172.16.20.2; our IP address is 172.16.20.118 Filename 'tmp/hummingboard-pS9nKY/imx6dl-hummingboard.dtb'. Load address: 0x18000000 Loading: *### 3.1 MiB/s done Bytes transferred = 32363 (7e6b hex) C1 U-Boot > bootz 0x12000000 - 0x18000000 ; bootm 0x12000000 - 0x18000000
[PYBOOT] [hummingboard 00:27]: u-boot: jumping to kernel image bootz 0x12000000 - 0x18000000 ; bootm 0x12000000 - 0x18000000 Kernel image @ 0x12000000 [ 0x000000 - 0x6443b0 ] ## Flattened Device Tree blob at 18000000 Booting using the fdt blob at 0x18000000 Using Device Tree in place at 18000000, end 1800ae6a
Starting kernel ...
[PYBOOT] [hummingboard 00:27]: u-boot: started kernel.
[PYBOOT] [hummingboard 01:02]: Timed out waiting for "<type 'str'>":
[PYBOOT] [hummingboard 01:03]: got exception: timeout ~$off
[PYBOOT] [hummingboard 01:04]: Done. Board hummingboard-arm-multi_v7_defconfig failure log: -------------------------------------------------
################################################################# ################################################################# ################################################################# ################################################################# ######################## 3.5 MiB/s done Bytes transferred = 7023712 (6b2c60 hex) C1 U-Boot > setenv serverip 172.16.20.2 setenv serverip 172.16.20.2 C1 U-Boot > tftp 0x18000000 tmp/hummingboard-6NXL8I/imx6dl-hummingboard.dtb tftp 0x18000000 tmp/hummingboard-6NXL8I/imx6dl-hummingboard.dtb Using FEC device TFTP from server 172.16.20.2; our IP address is 172.16.20.118 Filename 'tmp/hummingboard-6NXL8I/imx6dl-hummingboard.dtb'. Load address: 0x18000000 Loading: *### 3.1 MiB/s done Bytes transferred = 32363 (7e6b hex) C1 U-Boot > bootz 0x12000000 - 0x18000000 ; bootm 0x12000000 - 0x18000000
[PYBOOT] [hummingboard 00:22]: u-boot: jumping to kernel image bootz 0x12000000 - 0x18000000 ; bootm 0x12000000 - 0x18000000 Kernel image @ 0x12000000 [ 0x000000 - 0x6b2c60 ] ## Flattened Device Tree blob at 18000000 Booting using the fdt blob at 0x18000000 Using Device Tree in place at 18000000, end 1800ae6a
Starting kernel ...
[PYBOOT] [hummingboard 00:22]: u-boot: started kernel.
[PYBOOT] [hummingboard 00:57]: Timed out waiting for "<type 'str'>":
[PYBOOT] [hummingboard 00:58]: got exception: timeout ~$off
[PYBOOT] [hummingboard 00:59]: Done. Board odroidu3-arm-exynos_defconfig failure log: -------------------------------------------------
[ 1.946069] NET: Registered protocol family 10 [ 1.946737] sit: IPv6 over IPv4 tunneling driver [ 1.953872] NET: Registered protocol family 17 [ 1.954819] NET: Registered protocol family 15 [ 1.959293] Key type dns_resolver registered [ 1.964094] Registering SWP/SWPB emulation handler [ 1.976593] [drm] Exynos DRM: using 12c10000.mixer device for DMA mapping operations [ 1.978831] exynos-drm exynos-drm: bound 12c10000.mixer (ops mixer_component_ops) [ 1.986303] exynos-drm exynos-drm: bound 12d00000.hdmi (ops hdmi_component_ops) [ 1.993450] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.000040] [drm] No driver support for vblank timestamp query. [ 2.005946] [drm] Initialized exynos 1.0.0 20110530 on minor 0 [ 2.012245] s3c-rtc 10070000.rtc: rtc disabled, re-enabling [ 2.017543] s3c-rtc 10070000.rtc: rtc core: registered s3c as rtc1 [ 2.030828] mmc_host mmc1: Bus speed (slot 0) = 44000000Hz (slot req 52000000Hz, actual 44000000HZ div = 0) [ 2.035113] mmc_host mmc1: Bus speed (slot 0) = 73333333Hz (slot req 52000000Hz, actual 36666666HZ div = 1) [ 2.044925] mmc1: new DDR MMC card at address 0001 [ 2.049783] mmcblk1: mmc1:0001 008G92 7.28 GiB [ 2.053952] max98090 1-0010: MAX98090 REVID=0x43 [ 2.054091] mmcblk1boot0: mmc1:0001 008G92 partition 1 4.00 MiB [ 2.059239] mmcblk1boot1: mmc1:0001 008G92 partition 2 4.00 MiB [ 2.059371] mmcblk1rpmb: mmc1:0001 008G92 partition 3 512 KiB [ 2.060368] mmcblk1: p1 p2 [ 2.081098] max98090 1-0010: use default 2.8v micbias [ 2.092378] asoc-simple-card sound: HiFi <-> 3830000.i2s mapping ok [ 2.095056] input: gpio_keys as /devices/platform/gpio_keys/input/input0 [ 2.132942] max77686-rtc max77686-rtc: setting system clock to 2000-01-01 01:00:21 UTC (946688421) [ 2.146559] VDD10_HDMI_1.0V: disabling [ 2.147218] vdd_g3d: disabling [ 2.148290] BUCK8_2.8V: disabling [ 2.152168] ALSA device list: [ 2.153942] #0: Odroid-U3 [ 2.157445] Waiting for root device /dev/mmcblk0p2...
[PYBOOT] [odroidu3 01:49]: Timed out waiting for "<type 'str'>":
[PYBOOT] [odroidu3 01:50]: got exception: timeout ~$off
[PYBOOT] [odroidu3 01:51]: Done. Board omap5uevm-arm-multi_lpae_defconfig failure log: -------------------------------------------------
[ 1.898057] ThumbEE CPU extension supported. [ 1.902542] Registering SWP/SWPB emulation handler [ 1.927192] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 1.929247] smsc95xx v1.0.4 [ 1.936870] palmas 0-0048: Irq flag is 0x00000000 [ 1.963122] palmas 0-0048: Muxing GPIO 2, PWM 0, LED 0 [ 1.975583] SMPS6: supplied by vsys_cobra [ 1.980095] smps6: Bringing 1350000uV into 1200000-1200000uV [ 1.987703] SMPS7: supplied by vsys_cobra [ 1.992684] vdds_1v8_main: supplied by smps7 [ 1.998095] SMPS8: supplied by vsys_cobra [ 2.003891] SMPS9: supplied by vsys_cobra [ 2.008425] smps9: Bringing 0uV into 2100000-2100000uV [ 2.014753] smsc95xx 1-3:1.0 eth0: register 'smsc95xx' at usb-4a064c00.ehci-3, smsc95xx USB 2.0 Ethernet, 7e:b3:ce:42:e8:3a [ 2.028661] LDO1: supplied by vsys_cobra [ 2.033104] ldo1: Bringing 0uV into 1800000-1800000uV [ 2.039506] LDO2: supplied by vsys_cobra [ 2.043934] ldo2: Bringing 0uV into 2800000-2800000uV [ 2.050312] LDO3: supplied by vdds_1v8_main [ 2.056308] LDO4: supplied by vdds_1v8_main [ 2.061011] ldo4: Bringing 0uV into 1800000-1800000uV [ 2.067400] LDO5: supplied by vsys_cobra [ 2.073107] LDO6: supplied by vdds_1v8_main [ 2.080633] LDO7: supplied by vsys_cobra [ 2.085050] ldo7: Bringing 0uV into 2000000-2000000uV [ 2.091444] LDO8: supplied by vsys_cobra [ 2.097192] LDO9: supplied by vmmcsd_fixed [ 2.103284] LDOLN: supplied by vsys_cobra [ 2.109131] LDOUSB: supplied by vsys_cobra [ 2.120676] palmas-rtc 48070000.i2c:palmas@48:rtc: rtc core: registered 48070000.i2c:palmas as rtc0 [ 2.132431] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 2.140074] cpufreq: cpufreq_online: CPU0: Running at unlisted freq: 1100000 KHz [ 2.147986] cpufreq: cpufreq_online: CPU0: Unlisted initial frequency changed to: 1500000 KHz
[PYBOOT] [omap5uevm 02:06]: Timed out waiting for "<type 'str'>":
[PYBOOT] [omap5uevm 02:07]: got exception: timeout ~$off
[PYBOOT] [omap5uevm 02:08]: Done. Board omap5uevm-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 4.191468] omap_i2c 48070000.i2c: controller timed out [ 5.226468] omap_i2c 48070000.i2c: controller timed out [ 5.241471] omap_hsmmc 4809c000.mmc: fail to disable boot enabled vmmc reg [ 23.161459] INFO: rcu_sched detected stalls on CPUs/tasks: [ 23.167207] (detected by 1, t=4202 jiffies, g=-274, c=-275, q=21) [ 23.173695] All QSes seen, last rcu_sched kthread activity 4201 (-55368--59569), jiffies_till_next_fqs=1, root ->qsmask 0x0 [ 23.185346] swapper/1 R running 0 0 1 0x00000000 [ 23.192020] [<c031038c>] (unwind_backtrace) from [<c030b9b0>] (show_stack+0x10/0x14) [ 23.200134] [<c030b9b0>] (show_stack) from [<c039356c>] (rcu_check_callbacks+0x834/0x83c) [ 23.208699] [<c039356c>] (rcu_check_callbacks) from [<c0395cdc>] (update_process_times+0x3c/0x64) [ 23.217991] [<c0395cdc>] (update_process_times) from [<c03a6bb0>] (tick_sched_timer+0x48/0x8c) [ 23.227019] [<c03a6bb0>] (tick_sched_timer) from [<c0396a38>] (__hrtimer_run_queues+0x128/0x1bc) [ 23.236220] [<c0396a38>] (__hrtimer_run_queues) from [<c0396c88>] (hrtimer_interrupt+0xa8/0x208) [ 23.245426] [<c0396c88>] (hrtimer_interrupt) from [<c0a0abf8>] (arch_timer_handler_virt+0x28/0x30) [ 23.254818] [<c0a0abf8>] (arch_timer_handler_virt) from [<c0389608>] (handle_percpu_devid_irq+0x6c/0x84) [ 23.264749] [<c0389608>] (handle_percpu_devid_irq) from [<c03852ac>] (generic_handle_irq+0x24/0x34) [ 23.274228] [<c03852ac>] (generic_handle_irq) from [<c038555c>] (__handle_domain_irq+0x5c/0xb4) [ 23.283344] [<c038555c>] (__handle_domain_irq) from [<c03017a0>] (gic_handle_irq+0x54/0x98) [ 23.292084] [<c03017a0>] (gic_handle_irq) from [<c030c514>] (__irq_svc+0x54/0x70) [ 23.299917] Exception stack(0xee099f88 to 0xee099fd0) [ 23.305210] 9f80: 00000001 00000000 ea000013 f0880000 ee098000 c13024a4 [ 23.313776] 9fa0: 00000000 00000000 c1214580 c1302508 c140e668 c1302510 60000013 ee099fd8 [ 23.322338] 9fc0: c032b054 c0308780 a0000013 ffffffff [ 23.327629] [<c030c514>] (__irq_svc) from [<c0308780>] (arch_cpu_idle+0x20/0x3c) [ 23.335373] [<c0308780>] (arch_cpu_idle) from [<c03791e0>] (cpu_startup_entry+0x1bc/0x218) [ 23.344023] [<c03791e0>] (cpu_startup_entry) from [<80301c8c>] (0x80301c8c) [ 23.351318] rcu_sched kthread starved for 4201 jiffies! g4294967022 c4294967021 f0x2 RCU_GP_WAIT_FQS(3) ->state=0x100 [ 23.362427] rcu_sched W c0b86318 0 7 2 0x00000000 [ 23.369093] [<c0b86318>] (__schedule) from [<c0b86704>] (schedule+0x44/0x9c) [ 23.376481] [<c0b86704>] (schedule) from [<c0b892f8>] (schedule_timeout+0x124/0x1b0) [ 23.384591] [<c0b892f8>] (schedule_timeout) from [<c0392668>] (rcu_gp_kthread+0x518/0x8dc) [ 23.393245] [<c0392668>] (rcu_gp_kthread) from [<c035d04c>] (kthread+0xdc/0xf4) [ 23.400905] [<c035d04c>] (kthread) from [<c0307d78>] (ret_from_fork+0x14/0x3c)
[PYBOOT] [omap5uevm 02:08]: Timed out waiting for "<type 'str'>":
[PYBOOT] [omap5uevm 02:09]: got exception: timeout ~$off
[PYBOOT] [omap5uevm 02:10]: Done. Board pandaes-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 2.042510] omap2_set_init_voltage: unable to set vdd_iva [ 2.048248] Power Management for TI OMAP4+ devices. [ 2.053375] OMAP4 PM: u-boot >= v2012.07 is required for full PM support [ 2.060516] ThumbEE CPU extension supported. [ 2.065216] Registering SWP/SWPB emulation handler [ 2.072418] omap_i2c 48350000.i2c: bus 3 rev0.11 at 400 kHz [ 2.079010] omap_i2c 48060000.i2c: bus 2 rev0.11 at 100 kHz [ 2.085693] omap_i2c 48072000.i2c: bus 1 rev0.11 at 400 kHz [ 2.092620] Skipping twl internal clock init and using bootloader value (unknown osc rate) [ 2.106414] hub 1-1:1.0: USB hub found [ 2.110534] hub 1-1:1.0: 5 ports detected [ 2.115081] hw-breakpoint: Failed to enable monitor mode on CPU 0. [ 2.122070] hw-breakpoint: CPU 0 failed to disable vector catch [ 2.129974] twl 0-0048: PIH (irq 338) nested IRQs [ 2.152130] twl_rtc 48070000.i2c:twl@48:rtc: Power up reset detected. [ 2.159606] twl_rtc 48070000.i2c:twl@48:rtc: Enabling TWL-RTC [ 2.168243] twl_rtc 48070000.i2c:twl@48:rtc: rtc core: registered 48070000.i2c:twl@48 as rtc0 [ 2.168334] omap_i2c 48070000.i2c: bus 0 rev0.11 at 400 kHz [ 2.294219] omap_hsmmc 480d5000.mmc: card claims to support voltages below defined range [ 2.314117] mmc0: new SDIO card at address 0001 [ 2.340179] twl_rtc 48070000.i2c:twl@48:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 2.356933] vwl1271: disabling [ 2.361053] VUSB: disabling [ 2.364471] VANA: disabling [ 2.367889] VDAC: disabling [ 2.376586] Waiting for root device /dev/mmcblk0p2... [ 2.412200] usb 1-1.1: new high-speed USB device number 3 using ehci-omap [ 2.505065] mmc1: host does not support reading read-only switch, assuming write-enable [ 2.515350] mmc1: new high speed SDHC card at address b368 [ 2.521606] mmcblk1: mmc1:b368 00000 7.51 GiB [ 2.528045] mmcblk1: p1 p2 [ 2.530517] smsc95xx v1.0.4 [ 2.588195] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-4a064c00.ehci-1.1, smsc95xx USB 2.0 Ethernet, 0a:db:f8:b5:e0:77
[PYBOOT] [pandaes 02:21]: Timed out waiting for "<type 'str'>":
[PYBOOT] [pandaes 02:22]: got exception: timeout ~$off
[PYBOOT] [pandaes 02:23]: Done. Board pandaes-arm-omap2plus_defconfig failure log: -------------------------------------------------
[ 4.630645] smartreflex smartreflex.2: omap_sr_probe: SmartReflex driver initialized [ 4.672454] vwl1271: disabling [ 4.685302] VUSB: disabling [ 4.689117] VANA: disabling [ 4.693634] VDAC: disabling [ 4.703857] Waiting for root device /dev/mmcblk0p2... [ 4.752349] mmc1: host does not support reading read-only switch, assuming write-enable [ 4.763000] mmc1: new high speed SDHC card at address b368 [ 4.771697] mmcblk1: mmc1:b368 00000 7.51 GiB [ 4.780731] mmcblk1: p1 p2 [ 4.882720] ------------[ cut here ]------------ [ 4.882812] WARNING: CPU: 1 PID: 19 at /home/build/work/batch/arch/arm/mach-omap2/clockdomain.c:1279 clkdm_hwmod_disable+0xcc/0xe0 [ 4.882812] Modules linked in: [ 4.882812] CPU: 1 PID: 19 Comm: kworker/1:1 Not tainted 4.6.0-next-20160518 #1 [ 4.903167] Hardware name: Generic OMAP4 (Flattened Device Tree) [ 4.917114] Workqueue: pm pm_runtime_work [ 4.917114] [<c010ff48>] (unwind_backtrace) from [<c010c0a4>] (show_stack+0x10/0x14) [ 4.929443] [<c010c0a4>] (show_stack) from [<c0486738>] (dump_stack+0xac/0xe0) [ 4.929443] [<c0486738>] (dump_stack) from [<c0137a98>] (__warn+0xd8/0x104) [ 4.929443] [<c0137a98>] (__warn) from [<c0137b70>] (warn_slowpath_null+0x20/0x28) [ 4.929443] [<c0137b70>] (warn_slowpath_null) from [<c012df10>] (clkdm_hwmod_disable+0xcc/0xe0) [ 4.929443] [<c012df10>] (clkdm_hwmod_disable) from [<c01217dc>] (_idle+0x164/0x22c) [ 4.969482] [<c01217dc>] (_idle) from [<c0121ce0>] (omap_hwmod_idle+0x24/0x44) [ 4.969482] [<c0121ce0>] (omap_hwmod_idle) from [<c0122dac>] (omap_device_idle+0x3c/0x8c) [ 4.985626] [<c0122dac>] (omap_device_idle) from [<c053587c>] (__rpm_callback+0x2c/0x60) [ 4.985626] [<c053587c>] (__rpm_callback) from [<c0535900>] (rpm_callback+0x50/0x80) [ 5.002197] [<c0535900>] (rpm_callback) from [<c0535e50>] (rpm_suspend+0xf4/0x684) [ 5.002197] [<c0535e50>] (rpm_suspend) from [<c0537768>] (pm_runtime_work+0x74/0xa8) [ 5.002197] [<c0537768>] (pm_runtime_work) from [<c0154890>] (process_one_work+0x2b0/0x770) [ 5.002197] [<c0154890>] (process_one_work) from [<c01558c8>] (worker_thread+0x3c/0x540) [ 5.035461] [<c01558c8>] (worker_thread) from [<c015b234>] (kthread+0xd0/0xf0) [ 5.035461] [<c015b234>] (kthread) from [<c01077b0>] (ret_from_fork+0x14/0x24) [ 5.050598] ---[ end trace 544330f8cece58d2 ]---
[PYBOOT] [pandaes 02:18]: Timed out waiting for "<type 'str'>":
[PYBOOT] [pandaes 02:19]: got exception: timeout ~$off
[PYBOOT] [pandaes 02:21]: Done. Board pi-arm-exynos_defconfig failure log: -------------------------------------------------
[ 2.638816] snow-audio sound: HiFi <-> 3830000.i2s mapping ok [ 2.643119] mmcblk1boot0: mmc1:0001 MAG2GC partition 1 4.00 MiB [ 2.649550] mmcblk1boot1: mmc1:0001 MAG2GC partition 2 4.00 MiB [ 2.662611] NET: Registered protocol family 10 [ 2.665690] mmcblk1rpmb: mmc1:0001 MAG2GC partition 3 4.00 MiB [ 2.671463] mmcblk1: p1 [ 2.679727] sit: IPv6 over IPv4 tunneling driver [ 2.683458] NET: Registered protocol family 17 [ 2.687343] NET: Registered protocol family 15 [ 2.691829] Key type dns_resolver registered [ 2.696198] Registering SWP/SWPB emulation handler [ 2.700760] big.LITTLE switcher initializing [ 2.704986] bL_switcher_halve_cpus: no CPU pairing possible [ 2.710557] big.LITTLE switcher initialization failed [ 2.726147] usb 1-1: New USB device found, idVendor=2232, idProduct=1056 [ 2.733603] usb 1-1: New USB device strings: Mfr=3, Product=1, SerialNumber=2 [ 2.739822] s3c-rtc 101e0000.rtc: rtc disabled, re-enabling [ 2.740084] s3c-rtc 101e0000.rtc: rtc core: registered s3c as rtc1 [ 2.740871] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 2.740924] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 2.740932] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 2.740946] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 128,64 bit host data width,64 deep fifo [ 2.741105] dwmmc_exynos 12210000.mmc: allocated mmc-pwrseq [ 2.770186] dwmmc_exynos 12210000.mmc: 1 slots initialized [ 2.771107] [drm] Exynos DRM: using 14400000.fimd device for DMA mapping operations [ 2.771191] exynos-drm exynos-drm: bound 14400000.fimd (ops fimd_component_ops) [ 2.771321] exynos-drm exynos-drm: bound 14450000.mixer (ops mixer_component_ops) [ 2.814237] usb 1-1: Product: WebCam SC-10HDM13631N [ 2.819091] usb 1-1: Manufacturer: Generic [ 2.823168] usb 1-1: SerialNumber: 200901010001 [ 2.847176] asix 5-1:1.0 eth0: register 'asix' at usb-xhci-hcd.6.auto-1, ASIX AX88772 USB 2.0 Ethernet, c8:b3:73:46:fb:95 [ 2.864756] mmc_host mmc2: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) [ 2.877289] mmc2: new high speed SDIO card at address 0001
[PYBOOT] [pi 01:43]: Timed out waiting for "<type 'str'>":
[PYBOOT] [pi 01:44]: got exception: timeout ~$off
[PYBOOT] [pi 01:45]: Done. Board pi-arm-multi_lpae_defconfig failure log: -------------------------------------------------
[ 1.632544] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 128,64 bit host data width,64 deep fifo [ 1.644612] input: gpio-keys as /devices/platform/gpio-keys/input/input1 [ 1.654582] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.660245] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.666447] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.671803] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 128,64 bit host data width,64 deep fifo [ 1.681584] max77686-rtc max77802-rtc: hctosys: unable to read the hardware clock [ 1.703819] Waiting for root device /dev/mmcblk0p1... [ 1.741143] mmc_host mmc1: Bus speed (slot 0) = 200000000Hz (slot req 200000000Hz, actual 200000000HZ div = 0) [ 1.750081] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 52000000Hz, actual 50000000HZ div = 0) [ 1.759679] mmc_host mmc1: Bus speed (slot 0) = 100000000Hz (slot req 52000000Hz, actual 50000000HZ div = 1) [ 1.769222] mmc_host mmc1: Bus speed (slot 0) = 400000000Hz (slot req 200000000Hz, actual 200000000HZ div = 1) [ 1.779342] mmc1: new HS400 MMC card at address 0001 [ 1.784478] mmcblk1: mmc1:0001 MAG2GC 14.6 GiB [ 1.788782] mmcblk1boot0: mmc1:0001 MAG2GC partition 1 4.00 MiB [ 1.794667] mmcblk1boot1: mmc1:0001 MAG2GC partition 2 4.00 MiB [ 1.800912] mmcblk1rpmb: mmc1:0001 MAG2GC partition 3 4.00 MiB [ 1.806830] mmcblk1: p1 [ 1.814535] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.820108] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.826391] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.831753] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 128,64 bit host data width,64 deep fifo [ 2.631855] asix 3-1:1.0 eth0: register 'asix' at usb-xhci-hcd.5.auto-1, ASIX AX88772 USB 2.0 Ethernet, c8:b3:73:46:fb:95 [ 2.645706] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 2.651156] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 2.657537] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 2.662918] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 128,64 bit host data width,64 deep fifo [ 5.045800] dma-pl330 3880000.adma: Loaded driver for PL330 DMAC-241330 [ 5.050951] dma-pl330 3880000.adma: DBUFF-4x8bytes Num_Chans-6 Num_Peri-16 Num_Events-6 [ 5.063213] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 5.068658] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 5.075047] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 5.080425] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 128,64 bit host data width,64 deep fifo
[PYBOOT] [pi 01:52]: Timed out waiting for "<type 'str'>":
[PYBOOT] [pi 01:53]: got exception: timeout ~$off
[PYBOOT] [pi 01:54]: Done. Board pi-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.633199] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 128,64 bit host data width,64 deep fifo [ 1.645274] input: gpio-keys as /devices/platform/gpio-keys/input/input1 [ 1.655288] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.660947] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.667148] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.672503] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 128,64 bit host data width,64 deep fifo [ 1.682283] max77686-rtc max77802-rtc: hctosys: unable to read the hardware clock [ 1.704628] Waiting for root device /dev/mmcblk0p1... [ 1.741701] mmc_host mmc1: Bus speed (slot 0) = 200000000Hz (slot req 200000000Hz, actual 200000000HZ div = 0) [ 1.750635] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 52000000Hz, actual 50000000HZ div = 0) [ 1.760175] mmc_host mmc1: Bus speed (slot 0) = 100000000Hz (slot req 52000000Hz, actual 50000000HZ div = 1) [ 1.769775] mmc_host mmc1: Bus speed (slot 0) = 400000000Hz (slot req 200000000Hz, actual 200000000HZ div = 1) [ 1.779895] mmc1: new HS400 MMC card at address 0001 [ 1.785033] mmcblk1: mmc1:0001 MAG2GC 14.6 GiB [ 1.789337] mmcblk1boot0: mmc1:0001 MAG2GC partition 1 4.00 MiB [ 1.795220] mmcblk1boot1: mmc1:0001 MAG2GC partition 2 4.00 MiB [ 1.801463] mmcblk1rpmb: mmc1:0001 MAG2GC partition 3 4.00 MiB [ 1.807383] mmcblk1: p1 [ 1.815145] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.820724] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.827003] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.832367] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 128,64 bit host data width,64 deep fifo [ 2.632397] asix 3-1:1.0 eth0: register 'asix' at usb-xhci-hcd.5.auto-1, ASIX AX88772 USB 2.0 Ethernet, c8:b3:73:46:fb:95 [ 2.646266] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 2.651718] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 2.658098] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 2.663481] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 128,64 bit host data width,64 deep fifo [ 5.041360] dma-pl330 3880000.adma: Loaded driver for PL330 DMAC-241330 [ 5.046516] dma-pl330 3880000.adma: DBUFF-4x8bytes Num_Chans-6 Num_Peri-16 Num_Events-6 [ 5.058812] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 5.064252] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 5.070649] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 5.076023] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 128,64 bit host data width,64 deep fifo
[PYBOOT] [pi 01:46]: Timed out waiting for "<type 'str'>":
[PYBOOT] [pi 01:47]: got exception: timeout ~$off
[PYBOOT] [pi 01:48]: Done. Board pit-arm-exynos_defconfig failure log: -------------------------------------------------
[ 2.717783] Registering SWP/SWPB emulation handler [ 2.722377] big.LITTLE switcher initializing [ 2.726619] bL_switcher_halve_cpus: no CPU pairing possible [ 2.732155] big.LITTLE switcher initialization failed [ 2.749840] s3c-rtc 101e0000.rtc: rtc disabled, re-enabling [ 2.754224] s3c-rtc 101e0000.rtc: rtc core: registered s3c as rtc1 [ 2.760884] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 2.767037] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 2.773445] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 2.778826] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 128,64 bit host data width,64 deep fifo [ 2.788355] dwmmc_exynos 12210000.mmc: allocated mmc-pwrseq [ 2.794835] usb 1-1: New USB device found, idVendor=2232, idProduct=1056 [ 2.800365] usb 1-1: New USB device strings: Mfr=3, Product=1, SerialNumber=2 [ 2.807507] usb 1-1: Product: WebCam SC-10HDM13631N [ 2.812339] usb 1-1: Manufacturer: Generic [ 2.816414] usb 1-1: SerialNumber: 200901010001 [ 2.820950] dwmmc_exynos 12210000.mmc: 1 slots initialized [ 2.821483] input: gpio-keys as /devices/platform/gpio-keys/input/input2 [ 2.833469] max77686-rtc max77802-rtc: hctosys: unable to read the hardware clock [ 2.860821] vdd_1v2_2: disabling [ 2.862752] TPS65090_RAILSDCDC3: disabling [ 2.868439] lcd_vdd: disabling [ 2.872089] asix 5-1:1.0 eth0: register 'asix' at usb-xhci-hcd.6.auto-1, ASIX AX88772 USB 2.0 Ethernet, c8:b3:73:43:ee:23 [ 2.883112] TPS65090_RAILSLDO1: disabling [ 2.883117] TPS65090_RAILSLDO2: disabling [ 2.883651] ALSA device list: [ 2.883654] #0: Peach-Pit-I2S-MAX98090 [ 2.886278] mmc_host mmc2: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) [ 2.890627] mmc2: new high speed SDIO card at address 0001 [ 2.916450] Waiting for root device /dev/mmcblk0p1... [ 5.101741] dma-pl330 3880000.adma: Loaded driver for PL330 DMAC-241330 [ 5.106898] dma-pl330 3880000.adma: DBUFF-4x8bytes Num_Chans-6 Num_Peri-16 Num_Events-6 [ 41.770139] random: nonblocking pool is initialized
[PYBOOT] [pit 01:44]: Timed out waiting for "<type 'str'>":
[PYBOOT] [pit 01:45]: got exception: timeout ~$off
[PYBOOT] [pit 01:46]: Done. Board pit-arm-multi_lpae_defconfig failure log: -------------------------------------------------
[ 1.615522] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.621992] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.627367] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.632745] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 128,64 bit host data width,64 deep fifo [ 1.644832] input: gpio-keys as /devices/platform/gpio-keys/input/input1 [ 1.654794] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.660458] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.666658] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.672013] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 128,64 bit host data width,64 deep fifo [ 1.681791] max77686-rtc max77802-rtc: hctosys: unable to read the hardware clock [ 1.703439] Waiting for root device /dev/mmcblk0p1... [ 1.741305] mmc_host mmc1: Bus speed (slot 0) = 200000000Hz (slot req 200000000Hz, actual 200000000HZ div = 0) [ 1.750282] mmc1: new HS200 MMC card at address 0001 [ 1.755126] mmcblk1: mmc1:0001 MAG2GC 14.6 GiB [ 1.759423] mmcblk1boot0: mmc1:0001 MAG2GC partition 1 4.00 MiB [ 1.765364] mmcblk1boot1: mmc1:0001 MAG2GC partition 2 4.00 MiB [ 1.771230] mmcblk1rpmb: mmc1:0001 MAG2GC partition 3 4.00 MiB [ 1.777557] mmcblk1: p1 [ 1.785496] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.791079] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.797333] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.802711] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 128,64 bit host data width,64 deep fifo [ 2.636992] asix 3-1:1.0 eth0: register 'asix' at usb-xhci-hcd.5.auto-1, ASIX AX88772 USB 2.0 Ethernet, c8:b3:73:43:ee:23 [ 2.650825] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 2.656271] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 2.662657] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 2.668039] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 128,64 bit host data width,64 deep fifo [ 5.045976] dma-pl330 3880000.adma: Loaded driver for PL330 DMAC-241330 [ 5.051126] dma-pl330 3880000.adma: DBUFF-4x8bytes Num_Chans-6 Num_Peri-16 Num_Events-6 [ 5.063420] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 5.068858] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 5.075261] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 5.080634] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 128,64 bit host data width,64 deep fifo
[PYBOOT] [pit 01:51]: Timed out waiting for "<type 'str'>":
[PYBOOT] [pit 01:52]: got exception: timeout ~$off
[PYBOOT] [pit 01:54]: Done. Board pit-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.615560] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.622034] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.627407] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.632787] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 128,64 bit host data width,64 deep fifo [ 1.644879] input: gpio-keys as /devices/platform/gpio-keys/input/input1 [ 1.654846] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.660506] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.666706] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.672062] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 128,64 bit host data width,64 deep fifo [ 1.681840] max77686-rtc max77802-rtc: hctosys: unable to read the hardware clock [ 1.703486] Waiting for root device /dev/mmcblk0p1... [ 1.741297] mmc_host mmc1: Bus speed (slot 0) = 200000000Hz (slot req 200000000Hz, actual 200000000HZ div = 0) [ 1.750275] mmc1: new HS200 MMC card at address 0001 [ 1.755125] mmcblk1: mmc1:0001 MAG2GC 14.6 GiB [ 1.759423] mmcblk1boot0: mmc1:0001 MAG2GC partition 1 4.00 MiB [ 1.765363] mmcblk1boot1: mmc1:0001 MAG2GC partition 2 4.00 MiB [ 1.771227] mmcblk1rpmb: mmc1:0001 MAG2GC partition 3 4.00 MiB [ 1.777555] mmcblk1: p1 [ 1.785509] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.791092] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.797348] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.802727] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 128,64 bit host data width,64 deep fifo [ 2.636997] asix 3-1:1.0 eth0: register 'asix' at usb-xhci-hcd.5.auto-1, ASIX AX88772 USB 2.0 Ethernet, c8:b3:73:43:ee:23 [ 2.650861] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 2.656304] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 2.662689] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 2.668070] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 128,64 bit host data width,64 deep fifo [ 5.045960] dma-pl330 3880000.adma: Loaded driver for PL330 DMAC-241330 [ 5.051114] dma-pl330 3880000.adma: DBUFF-4x8bytes Num_Chans-6 Num_Peri-16 Num_Events-6 [ 5.063393] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 5.068830] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 5.075232] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 5.080606] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 128,64 bit host data width,64 deep fifo
[PYBOOT] [pit 01:49]: Timed out waiting for "<type 'str'>":
[PYBOOT] [pit 01:50]: got exception: timeout ~$off
[PYBOOT] [pit 01:51]: Done. Board snow-arm-exynos_defconfig failure log: -------------------------------------------------
[ 3.572551] pwrseq_simple mmc3_pwrseq: GPIO lookup for consumer reset [ 3.578940] pwrseq_simple mmc3_pwrseq: using device tree for GPIO lookup [ 3.585658] of_get_named_gpiod_flags: parsed 'reset-gpios' property of node '/mmc3_pwrseq[1]' - status (0) [ 3.596282] dwmmc_exynos 12230000.mmc: IDMAC supports 32-bit address mode. [ 3.602136] dwmmc_exynos 12230000.mmc: Using internal DMA controller. [ 3.608518] dwmmc_exynos 12230000.mmc: Version ID is 241a [ 3.613906] dwmmc_exynos 12230000.mmc: DW MMC controller at irq 91,32 bit host data width,128 deep fifo [ 3.623333] dwmmc_exynos 12230000.mmc: GPIO lookup for consumer wp [ 3.629432] dwmmc_exynos 12230000.mmc: using device tree for GPIO lookup [ 3.636116] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/mmc@12230000[0]' [ 3.644881] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/mmc@12230000[0]' [ 3.653561] dwmmc_exynos 12230000.mmc: using lookup tables for GPIO lookup [ 3.660419] dwmmc_exynos 12230000.mmc: lookup for GPIO wp failed [ 3.666424] dwmmc_exynos 12230000.mmc: allocated mmc-pwrseq [ 3.700812] dwmmc_exynos 12230000.mmc: 1 slots initialized [ 3.704997] of_get_named_gpiod_flags: parsed 'gpios' property of node '/gpio-keys/lid-switch[0]' - status (0) [ 3.714771] of_get_named_gpiod_flags: parsed 'gpios' property of node '/gpio-keys/power[0]' - status (0) [ 3.724247] gpio-250 (Lid): gpiod_set_debounce: missing set() or set_debounce() operations [ 3.732521] gpio-232 (Power): gpiod_set_debounce: missing set() or set_debounce() operations [ 3.741165] input: gpio-keys as /devices/platform/gpio-keys/input/input2 [ 3.757807] mmc_host mmc2: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) [ 3.770364] mmc2: new high speed SDIO card at address 0001 [ 3.780768] max77686-rtc max77686-rtc: setting system clock to 2000-01-01 01:00:34 UTC (946688434) [ 3.799373] TPS65090_RAILSDCDC1: disabling [ 3.802027] TPS65090_RAILSDCDC2: disabling [ 3.806092] TPS65090_RAILSDCDC3: disabling [ 3.811530] lcd_vdd: disabling [ 3.814361] TPS65090_RAILSLDO1: disabling [ 3.817209] TPS65090_RAILSLDO2: disabling [ 3.822024] ALSA device list: [ 3.824126] #0: Snow-I2S-MAX98095 [ 3.828338] Waiting for root device /dev/mmcblk0p3... [ 48.665889] random: nonblocking pool is initialized
[PYBOOT] [snow 01:59]: Timed out waiting for "<type 'str'>":
[PYBOOT] [snow 02:00]: got exception: timeout ~$off
[PYBOOT] [snow 02:01]: Done. Board snow-arm-multi_lpae_defconfig failure log: -------------------------------------------------
[ 1.716853] usbhid: USB HID core driver [ 1.727645] NET: Registered protocol family 10 [ 1.731303] sit: IPv6 over IPv4 tunneling driver [ 1.735821] NET: Registered protocol family 17 [ 1.739669] can: controller area network core (rev 20120528 abi 9) [ 1.745871] NET: Registered protocol family 29 [ 1.750244] can: raw protocol (rev 20120528) [ 1.754495] can: broadcast manager protocol (rev 20120528 t) [ 1.760143] can: netlink gateway (rev 20130117) max_hops=1 [ 1.765989] Key type dns_resolver registered [ 1.770302] ThumbEE CPU extension supported. [ 1.774098] Registering SWP/SWPB emulation handler [ 1.787429] dwmmc_exynos 12230000.mmc: IDMAC supports 32-bit address mode. [ 1.792937] dwmmc_exynos 12230000.mmc: Using internal DMA controller. [ 1.799291] dwmmc_exynos 12230000.mmc: Version ID is 241a [ 1.804685] dwmmc_exynos 12230000.mmc: DW MMC controller at irq 91,32 bit host data width,128 deep fifo [ 1.814152] dwmmc_exynos 12230000.mmc: allocated mmc-pwrseq [ 1.849366] dwmmc_exynos 12230000.mmc: 1 slots initialized [ 1.857016] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 1.879677] max77686-rtc max77686-rtc: setting system clock to 2000-01-01 01:00:34 UTC (946688434) [ 1.889809] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 52000000Hz, actual 50000000HZ div = 0) [ 1.899249] mmc_host mmc1: Bus speed (slot 0) = 100000000Hz (slot req 52000000Hz, actual 50000000HZ div = 1) [ 1.905300] vbat-supply: disabling [ 1.911763] mmc1: new DDR MMC card at address 0001 [ 1.912579] Waiting for root device /dev/mmcblk0p3... [ 1.921433] mmcblk1: mmc1:0001 SEM16G 14.7 GiB [ 1.925754] mmcblk1boot0: mmc1:0001 SEM16G partition 1 4.00 MiB [ 1.927950] mmc_host mmc2: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) [ 1.935048] mmc2: new high speed SDIO card at address 0001 [ 1.946843] mmcblk1boot1: mmc1:0001 SEM16G partition 2 4.00 MiB [ 1.952790] mmcblk1rpmb: mmc1:0001 SEM16G partition 3 4.00 MiB [ 1.962125] mmcblk1: p2 p3 [ 74.674401] random: nonblocking pool is initialized
[PYBOOT] [snow 01:59]: Timed out waiting for "<type 'str'>":
[PYBOOT] [snow 02:00]: got exception: timeout ~$off
[PYBOOT] [snow 02:02]: Done. Board snow-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.715964] usbhid: USB HID core driver [ 1.724501] NET: Registered protocol family 10 [ 1.727946] sit: IPv6 over IPv4 tunneling driver [ 1.732493] NET: Registered protocol family 17 [ 1.736520] can: controller area network core (rev 20120528 abi 9) [ 1.742708] NET: Registered protocol family 29 [ 1.747098] can: raw protocol (rev 20120528) [ 1.751351] can: broadcast manager protocol (rev 20120528 t) [ 1.756995] can: netlink gateway (rev 20130117) max_hops=1 [ 1.762741] Key type dns_resolver registered [ 1.767023] ThumbEE CPU extension supported. [ 1.770974] Registering SWP/SWPB emulation handler [ 1.780966] dwmmc_exynos 12230000.mmc: IDMAC supports 32-bit address mode. [ 1.786430] dwmmc_exynos 12230000.mmc: Using internal DMA controller. [ 1.792807] dwmmc_exynos 12230000.mmc: Version ID is 241a [ 1.798192] dwmmc_exynos 12230000.mmc: DW MMC controller at irq 91,32 bit host data width,128 deep fifo [ 1.807635] dwmmc_exynos 12230000.mmc: allocated mmc-pwrseq [ 1.839321] dwmmc_exynos 12230000.mmc: 1 slots initialized [ 1.846477] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 1.875735] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 52000000Hz, actual 50000000HZ div = 0) [ 1.884623] max77686-rtc max77686-rtc: setting system clock to 2000-01-01 01:00:34 UTC (946688434) [ 1.899557] vbat-supply: disabling [ 1.902973] mmc_host mmc1: Bus speed (slot 0) = 100000000Hz (slot req 52000000Hz, actual 50000000HZ div = 1) [ 1.911564] Waiting for root device /dev/mmcblk0p3... [ 1.916821] mmc1: new DDR MMC card at address 0001 [ 1.921440] mmcblk1: mmc1:0001 SEM16G 14.7 GiB [ 1.925776] mmcblk1boot0: mmc1:0001 SEM16G partition 1 4.00 MiB [ 1.931671] mmcblk1boot1: mmc1:0001 SEM16G partition 2 4.00 MiB [ 1.937563] mmcblk1rpmb: mmc1:0001 SEM16G partition 3 4.00 MiB [ 1.946967] mmcblk1: p2 p3 [ 1.956049] mmc_host mmc2: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) [ 1.972585] mmc2: new high speed SDIO card at address 0001 [ 61.484396] random: nonblocking pool is initialized
[PYBOOT] [snow 02:00]: Timed out waiting for "<type 'str'>":
[PYBOOT] [snow 02:01]: got exception: timeout ~$off
[PYBOOT] [snow 02:02]: Done. Board wandboard-arm-imx_v6_v7_defconfig failure log: -------------------------------------------------
################################################################# ################################################################# ################################################################# ################################################################# ########################################################## 5 MiB/s done Bytes transferred = 6570928 (6443b0 hex) => setenv serverip 172.16.20.2 setenv serverip 172.16.20.2 => tftp 0x18000000 tmp/wandboard-PXx4t_/imx6q-wandboard.dtb tftp 0x18000000 tmp/wandboard-PXx4t_/imx6q-wandboard.dtb Using FEC device TFTP from server 172.16.20.2; our IP address is 172.16.20.162 Filename 'tmp/wandboard-PXx4t_/imx6q-wandboard.dtb'. Load address: 0x18000000 Loading: *### 5.1 MiB/s done Bytes transferred = 32385 (7e81 hex) => bootz 0x12000000 - 0x18000000 ; bootm 0x12000000 - 0x18000000
[PYBOOT] [wandboard 00:22]: u-boot: jumping to kernel image bootz 0x12000000 - 0x18000000 ; bootm 0x12000000 - 0x18000000 Kernel image @ 0x12000000 [ 0x000000 - 0x6443b0 ] ## Flattened Device Tree blob at 18000000 Booting using the fdt blob at 0x18000000 Using Device Tree in place at 18000000, end 1800ae80
Starting kernel ...
[PYBOOT] [wandboard 00:22]: u-boot: started kernel.
[PYBOOT] [wandboard 00:57]: Timed out waiting for "<type 'str'>":
[PYBOOT] [wandboard 00:58]: got exception: timeout ~$off
[PYBOOT] [wandboard 00:59]: Done. Board wandboard-arm-multi_v7_defconfig failure log: -------------------------------------------------
################################################################# ################################################################# ################################################################# ################################################################# ######################## 5.4 MiB/s done Bytes transferred = 7023712 (6b2c60 hex) => setenv serverip 172.16.20.2 setenv serverip 172.16.20.2 => tftp 0x18000000 tmp/wandboard-lQKRhA/imx6q-wandboard.dtb tftp 0x18000000 tmp/wandboard-lQKRhA/imx6q-wandboard.dtb Using FEC device TFTP from server 172.16.20.2; our IP address is 172.16.20.162 Filename 'tmp/wandboard-lQKRhA/imx6q-wandboard.dtb'. Load address: 0x18000000 Loading: *### 4.4 MiB/s done Bytes transferred = 32385 (7e81 hex) => bootz 0x12000000 - 0x18000000 ; bootm 0x12000000 - 0x18000000
[PYBOOT] [wandboard 00:23]: u-boot: jumping to kernel image bootz 0x12000000 - 0x18000000 ; bootm 0x12000000 - 0x18000000 Kernel image @ 0x12000000 [ 0x000000 - 0x6b2c60 ] ## Flattened Device Tree blob at 18000000 Booting using the fdt blob at 0x18000000 Using Device Tree in place at 18000000, end 1800ae80
Starting kernel ...
[PYBOOT] [wandboard 00:23]: u-boot: started kernel.
[PYBOOT] [wandboard 00:58]: Timed out waiting for "<type 'str'>":
[PYBOOT] [wandboard 00:59]: got exception: timeout ~$off
[PYBOOT] [wandboard 01:01]: Done.