Full logs are available at http://arm-soc.lixom.net/bootlogs/mainline/v4.2-6758-ga4fdb2a/
Failed boards:
cubie arm-sunxi_defconfig : FAILED 1:44.39 cubie arm-multi_v7_defconfig : FAILED 1:55.12 cubie2 arm-sunxi_defconfig : FAILED 1:43.86 cubie2 arm-multi_v7_defconfig : FAILED 1:46.95 cubie2 arm-multi_lpae_defconfig : FAILED 1:52.77 minnowmax x86-minnowmax_defconfig : FAILED 1:05.85
Successful boards:
apc arm-vt8500_v6_v7_defconfig : passed 1:18.61 arndale arm-exynos_defconfig : passed 1:30.81 arndale arm-multi_v7_defconfig : passed 1:32.88 arndale arm-multi_lpae_defconfig : passed 1:25.20 bbb arm-omap2plus_defconfig : passed 1:45.57 bbb arm-multi_v7_defconfig : passed 1:25.74 capri arm-bcm_defconfig : passed 0:52.46 capri arm-multi_v7_defconfig : passed 1:04.24 chitra powerpc-pasemi_defconfig : passed 2:02.56 chitra powerpc-ppc64_defconfig : passed 3:03.64 colombus arm-sunxi_defconfig : passed 1:07.34 colombus arm-multi_v7_defconfig : passed 1:34.24 colombus arm-multi_lpae_defconfig : passed 1:13.27 cosmic arm-imx_v6_v7_defconfig : passed 3:15.96 cosmic arm-multi_v7_defconfig : passed 2:45.84 dalmore arm-tegra_defconfig : passed 1:23.78 dalmore arm-multi_v7_defconfig : passed 1:24.13 dalmore arm-multi_lpae_defconfig : passed 1:25.24 hummingboard arm-imx_v6_v7_defconfig : warnings 1:30.78 hummingboard arm-multi_v7_defconfig : passed 1:19.83 jetsontk1 arm-tegra_defconfig : passed 0:50.14 jetsontk1 arm-multi_v7_defconfig : passed 0:51.79 jetsontk1 arm-multi_lpae_defconfig : passed 0:59.86 omap5uevm arm-omap2plus_defconfig : passed 1:05.78 omap5uevm arm-multi_v7_defconfig : passed 1:47.47 omap5uevm arm-multi_lpae_defconfig : passed 1:53.78 pandaes arm-omap2plus_defconfig : warnings 1:39.01 pandaes arm-multi_v7_defconfig : passed 1:50.84 pi arm-exynos_defconfig : passed 1:32.13 pit arm-exynos_defconfig : passed 1:35.79 snow arm-exynos_defconfig : passed 1:06.00 snow arm-multi_v7_defconfig : passed 1:09.10 snow arm-multi_lpae_defconfig : passed 1:02.44 snowball arm-u8500_defconfig : warnings 3:20.33 snowball arm-multi_v7_defconfig : passed 2:13.59 socfpga arm-socfpga_defconfig : passed 1:42.26 socfpga arm-multi_v7_defconfig : passed 1:50.00 trimslice arm-tegra_defconfig : passed 1:31.41 trimslice arm-multi_v7_defconfig : passed 1:42.40 wandboard arm-imx_v6_v7_defconfig : passed 2:28.70 wandboard arm-multi_v7_defconfig : passed 1:56.27
Offline boards:
beaver arm-tegra_defconfig : OFFLINE 1:25.18 beaver arm-multi_v7_defconfig : OFFLINE 1:27.62 cubox arm-multi_v7_defconfig : OFFLINE 2:01.09 cubox arm-mvebu_v7_defconfig : OFFLINE 2:02.38 odroidu3 arm-exynos_defconfig : OFFLINE 1:29.78 parallella arm-multi_v7_defconfig : OFFLINE 1:27.94 pi arm-multi_v7_defconfig : OFFLINE 0:34.39 pi arm-multi_lpae_defconfig : OFFLINE 0:39.22 pit arm-multi_v7_defconfig : OFFLINE 0:31.10 pit arm-multi_lpae_defconfig : OFFLINE 0:38.88 rk3288evb arm-multi_v7_defconfig : OFFLINE 0:46.41 rk3288evb arm-multi_lpae_defconfig : OFFLINE 0:43.91 sama5 arm-sama5_defconfig : OFFLINE 1:26.74 seaboard arm-tegra_defconfig : OFFLINE 1:26.66 seaboard arm-multi_v7_defconfig : OFFLINE 1:25.61
Board legend is available at http://arm-soc.lixom.net/boards.html
Last entries of failed logs below:
========================================================================
Board cubie-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.447726] ohci-platform 1c14400.usb: new USB bus registered, assigned bus number 3 [ 1.455711] ohci-platform 1c14400.usb: irq 23, io mem 0x01c14400 [ 1.519622] hub 3-0:1.0: USB hub found [ 1.523486] hub 3-0:1.0: 1 port detected [ 1.529127] ohci-platform 1c1c400.usb: Generic Platform OHCI controller [ 1.535866] ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 4 [ 1.544957] ohci-platform 1c1c400.usb: irq 27, io mem 0x01c1c400 [ 1.609615] hub 4-0:1.0: USB hub found [ 1.613468] hub 4-0:1.0: 1 port detected [ 1.618635] sunxi-rtc 1c20d00.rtc: setting system clock to 2010-01-01 00:00:15 UTC (1262304015) [ 1.679734] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.689637] ata1.00: ATA-8: SanDisk SSD P4 32GB, SSD CS01, max UDMA/133 [ 1.696279] ata1.00: 62533296 sectors, multi 1: LBA48 [ 1.701964] ata1.00: configured for UDMA/133 [ 1.706756] scsi 0:0:0:0: Direct-Access ATA SanDisk SSD P4 3 CS01 PQ: 0 ANSI: 5 [ 1.716274] sd 0:0:0:0: [sda] 62533296 512-byte logical blocks: (32.0 GB/29.8 GiB) [ 1.724217] sd 0:0:0:0: [sda] Write Protect is off [ 1.729185] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.742572] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.754794] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 3.834739] sun4i-emac 1c0b000.ethernet eth0: Link is Up - 100Mbps/Full - flow control off [ 3.843076] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 3.854837] Sending DHCP requests ..., OK [ 10.820205] IP-Config: Got DHCP answer from 172.16.20.1, my address is 172.16.20.101 [ 10.828316] IP-Config: Complete: [ 10.831600] device=eth0, hwaddr=08:00:08:1e:2f:44, ipaddr=172.16.20.101, mask=255.255.255.0, gw=172.16.20.1 [ 10.841793] host=172.16.20.101, domain=, nis-domain=(none) [ 10.847731] bootserver=0.0.0.0, rootserver=172.16.20.2, rootpath= [ 10.854101] nameserver0=172.16.20.1 [ 10.858285] vcc3v0: disabling [ 10.861284] vcc5v0: disabling [ 10.864265] ldo3: disabling [ 10.867285] ldo4: disabling
[PYBOOT] [cubie 01:52]: Timed out waiting for "<type 'str'>":
[PYBOOT] [cubie 01:53]: got exception: timeout ~$off
[PYBOOT] [cubie 01:54]: Done.
========================================================================
Board cubie-arm-sunxi_defconfig failure log: -------------------------------------------------
[ 1.157306] hub 2-0:1.0: 1 port detected [ 1.161823] ohci-platform 1c14400.usb: Generic Platform OHCI controller [ 1.168501] ohci-platform 1c14400.usb: new USB bus registered, assigned bus number 3 [ 1.176349] ohci-platform 1c14400.usb: irq 23, io mem 0x01c14400 [ 1.241383] hub 3-0:1.0: USB hub found [ 1.245169] hub 3-0:1.0: 1 port detected [ 1.249756] ohci-platform 1c1c400.usb: Generic Platform OHCI controller [ 1.256389] ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 4 [ 1.264302] ohci-platform 1c1c400.usb: irq 27, io mem 0x01c1c400 [ 1.331393] hub 4-0:1.0: USB hub found [ 1.335177] hub 4-0:1.0: 1 port detected [ 1.339564] sunxi-rtc 1c20d00.rtc: setting system clock to 2010-01-01 00:00:14 UTC (1262304014) [ 1.426639] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.436416] ata1.00: ATA-8: SanDisk SSD P4 32GB, SSD CS01, max UDMA/133 [ 1.443061] ata1.00: 62533296 sectors, multi 1: LBA48 [ 1.448804] ata1.00: configured for UDMA/133 [ 1.453547] scsi 0:0:0:0: Direct-Access ATA SanDisk SSD P4 3 CS01 PQ: 0 ANSI: 5 [ 1.462866] sd 0:0:0:0: [sda] 62533296 512-byte logical blocks: (32.0 GB/29.8 GiB) [ 1.470824] sd 0:0:0:0: [sda] Write Protect is off [ 1.475705] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.488011] sd 0:0:0:0: [sda] Attached SCSI disk [ 3.686629] sun4i-emac 1c0b000.ethernet eth0: Link is Up - 100Mbps/Full - flow control off [ 3.706619] Sending DHCP requests ..., OK [ 11.007079] IP-Config: Got DHCP answer from 172.16.20.1, my address is 172.16.20.101 [ 11.015040] IP-Config: Complete: [ 11.018315] device=eth0, hwaddr=08:00:08:1e:2f:44, ipaddr=172.16.20.101, mask=255.255.255.0, gw=172.16.20.1 [ 11.028490] host=172.16.20.101, domain=, nis-domain=(none) [ 11.034401] bootserver=0.0.0.0, rootserver=172.16.20.2, rootpath= [ 11.040758] nameserver0=172.16.20.1 [ 11.044890] vcc3v0: disabling [ 11.047876] vcc5v0: disabling [ 11.050849] ldo3: disabling [ 11.053831] ldo4: disabling
[PYBOOT] [cubie 01:41]: Timed out waiting for "<type 'str'>":
[PYBOOT] [cubie 01:42]: got exception: timeout ~$off
[PYBOOT] [cubie 01:43]: Done.
========================================================================
Board cubie2-arm-multi_lpae_defconfig failure log: -------------------------------------------------
[ 1.556029] hub 3-0:1.0: USB hub found [ 1.559867] hub 3-0:1.0: 1 port detected [ 1.566012] ohci-platform 1c1c400.usb: Generic Platform OHCI controller [ 1.572717] ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 4 [ 1.581413] ohci-platform 1c1c400.usb: irq 32, io mem 0x01c1c400 [ 1.645977] hub 4-0:1.0: USB hub found [ 1.649812] hub 4-0:1.0: 1 port detected [ 1.655278] sunxi-rtc 1c20d00.rtc: setting system clock to 1970-01-01 00:00:15 UTC (15) [ 1.725793] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.742970] RX IPC Checksum Offload disabled [ 1.747361] No MAC Management Counters available [ 1.755854] ata1.00: ATA-8: SanDisk pSSD-S2 8GB, SSD 6.00, max UDMA/133 [ 1.762620] ata1.00: 15649200 sectors, multi 0: LBA48 [ 1.767841] Sending DHCP requests . [ 1.781264] ata1.00: configured for UDMA/133 [ 1.786596] scsi 0:0:0:0: Direct-Access ATA SanDisk pSSD-S2 6.00 PQ: 0 ANSI: 5 [ 1.796932] sd 0:0:0:0: [sda] 15649200 512-byte logical blocks: (8.01 GB/7.46 GiB) [ 1.805180] sd 0:0:0:0: [sda] Write Protect is off [ 1.810259] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.831372] sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8 sda9 sda10 sda11 sda12 [ 1.844043] sd 0:0:0:0: [sda] Attached SCSI disk [ 3.731064] sun7i-dwmac 1c50000.ethernet eth0: Link is Up - 100Mbps/Full - flow control off [ 4.305783] .., OK [ 8.751314] IP-Config: Got DHCP answer from 172.16.20.1, my address is 172.16.20.104 [ 8.759676] IP-Config: Complete: [ 8.763005] device=eth0, hwaddr=08:00:08:1e:2f:64, ipaddr=172.16.20.104, mask=255.255.255.0, gw=172.16.20.1 [ 8.773224] host=172.16.20.104, domain=, nis-domain=(none) [ 8.779181] bootserver=0.0.0.0, rootserver=172.16.20.2, rootpath= [ 8.785574] nameserver0=172.16.20.1 [ 8.789810] vcc3v0: disabling [ 8.792827] vcc5v0: disabling [ 8.795854] ldo3: disabling [ 8.798902] ldo4: disabling
[PYBOOT] [cubie2 01:49]: Timed out waiting for "<type 'str'>":
[PYBOOT] [cubie2 01:50]: got exception: timeout ~$off
[PYBOOT] [cubie2 01:52]: Done.
========================================================================
Board cubie2-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.556142] hub 3-0:1.0: USB hub found [ 1.559979] hub 3-0:1.0: 1 port detected [ 1.566121] ohci-platform 1c1c400.usb: Generic Platform OHCI controller [ 1.572827] ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 4 [ 1.581557] ohci-platform 1c1c400.usb: irq 32, io mem 0x01c1c400 [ 1.646085] hub 4-0:1.0: USB hub found [ 1.649922] hub 4-0:1.0: 1 port detected [ 1.655396] sunxi-rtc 1c20d00.rtc: setting system clock to 1970-01-01 00:00:15 UTC (15) [ 1.725901] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.743076] RX IPC Checksum Offload disabled [ 1.747465] No MAC Management Counters available [ 1.755955] ata1.00: ATA-8: SanDisk pSSD-S2 8GB, SSD 6.00, max UDMA/133 [ 1.762718] ata1.00: 15649200 sectors, multi 0: LBA48 [ 1.767939] Sending DHCP requests . [ 1.781362] ata1.00: configured for UDMA/133 [ 1.786692] scsi 0:0:0:0: Direct-Access ATA SanDisk pSSD-S2 6.00 PQ: 0 ANSI: 5 [ 1.797031] sd 0:0:0:0: [sda] 15649200 512-byte logical blocks: (8.01 GB/7.46 GiB) [ 1.805304] sd 0:0:0:0: [sda] Write Protect is off [ 1.810385] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.831521] sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8 sda9 sda10 sda11 sda12 [ 1.844179] sd 0:0:0:0: [sda] Attached SCSI disk [ 3.731174] sun7i-dwmac 1c50000.ethernet eth0: Link is Up - 100Mbps/Full - flow control off [ 3.925885] ..., OK [ 14.301408] IP-Config: Got DHCP answer from 172.16.20.1, my address is 172.16.20.104 [ 14.309765] IP-Config: Complete: [ 14.313096] device=eth0, hwaddr=08:00:08:1e:2f:64, ipaddr=172.16.20.104, mask=255.255.255.0, gw=172.16.20.1 [ 14.323319] host=172.16.20.104, domain=, nis-domain=(none) [ 14.329286] bootserver=0.0.0.0, rootserver=172.16.20.2, rootpath= [ 14.335680] nameserver0=172.16.20.1 [ 14.339918] vcc3v0: disabling [ 14.342940] vcc5v0: disabling [ 14.345970] ldo3: disabling [ 14.349018] ldo4: disabling
[PYBOOT] [cubie2 01:44]: Timed out waiting for "<type 'str'>":
[PYBOOT] [cubie2 01:45]: got exception: timeout ~$off
[PYBOOT] [cubie2 01:46]: Done.
========================================================================
Board cubie2-arm-sunxi_defconfig failure log: -------------------------------------------------
[ 1.253419] hub 3-0:1.0: USB hub found [ 1.257215] hub 3-0:1.0: 1 port detected [ 1.261872] ohci-platform 1c1c400.usb: Generic Platform OHCI controller [ 1.268507] ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 4 [ 1.276445] ohci-platform 1c1c400.usb: irq 32, io mem 0x01c1c400 [ 1.343415] hub 4-0:1.0: USB hub found [ 1.347206] hub 4-0:1.0: 1 port detected [ 1.351623] sunxi-rtc 1c20d00.rtc: setting system clock to 1970-01-01 00:00:14 UTC (14) [ 1.438590] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.455521] RX IPC Checksum Offload disabled [ 1.459903] No MAC Management Counters available [ 1.468021] ata1.00: ATA-8: SanDisk pSSD-S2 8GB, SSD 6.00, max UDMA/133 [ 1.474673] ata1.00: 15649200 sectors, multi 0: LBA48 [ 1.479855] Sending DHCP requests . [ 1.487749] ata1.00: configured for UDMA/133 [ 1.492800] scsi 0:0:0:0: Direct-Access ATA SanDisk pSSD-S2 6.00 PQ: 0 ANSI: 5 [ 1.502243] sd 0:0:0:0: [sda] 15649200 512-byte logical blocks: (8.01 GB/7.46 GiB) [ 1.510259] sd 0:0:0:0: [sda] Write Protect is off [ 1.515156] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.534848] sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8 sda9 sda10 sda11 sda12 [ 1.545270] sd 0:0:0:0: [sda] Attached SCSI disk [ 3.438798] sun7i-dwmac 1c50000.ethernet eth0: Link is Up - 100Mbps/Full - flow control off [ 4.418548] .., OK [ 9.579023] IP-Config: Got DHCP answer from 172.16.20.1, my address is 172.16.20.104 [ 9.587026] IP-Config: Complete: [ 9.590302] device=eth0, hwaddr=08:00:08:1e:2f:64, ipaddr=172.16.20.104, mask=255.255.255.0, gw=172.16.20.1 [ 9.600476] host=172.16.20.104, domain=, nis-domain=(none) [ 9.606388] bootserver=0.0.0.0, rootserver=172.16.20.2, rootpath= [ 9.612744] nameserver0=172.16.20.1 [ 9.616881] vcc3v0: disabling [ 9.619858] vcc5v0: disabling [ 9.622835] ldo3: disabling [ 9.625817] ldo4: disabling
[PYBOOT] [cubie2 01:39]: Timed out waiting for "<type 'str'>":
[PYBOOT] [cubie2 01:40]: got exception: timeout ~$off
[PYBOOT] [cubie2 01:41]: Done.
========================================================================
Board minnowmax-x86-minnowmax_defconfig failure log: -------------------------------------------------
Connected to minnowmax console [channel connected] (~$quit to exit) ~$open
~$hardreset
Command(minnowmax console)> open console already open
Command(minnowmax console)> hardreset (user:build) Reset target node minnowmax status: off node minnowmax status: on
[PYBOOT] [minnowmax 01:03]: Timed out waiting for "<type 'str'>":
[PYBOOT] [minnowmax 01:04]: got exception: timeout ~$off
[PYBOOT] [minnowmax 01:05]: Done.