Failed boards:
bbb omap2plus_defconfig : FAILED 1:09.10 bbb multi_v7_defconfig : FAILED 1:08.34 beaver tegra_defconfig : FAILED 2:57.81 beaver multi_v7_defconfig : FAILED 2:56.53 capri multi_v7_defconfig : FAILED 2:58.63 cubie sunxi_defconfig : FAILED 0:59.86 cubie multi_v7_defconfig : FAILED 1:07.70 cubie2 sunxi_defconfig : FAILED 0:57.74 cubie2 multi_v7_defconfig : FAILED 1:05.80 cubie2 multi_lpae_defconfig : FAILED 0:59.20 cubox dove_defconfig : BUILD FAILED dalmore multi_v7_defconfig : FAILED 1:10.95 dalmore multi_lpae_defconfig : FAILED 1:04.65 omap5uevm omap2plus_defconfig : FAILED 1:31.16 omap5uevm multi_v7_defconfig : FAILED 1:10.03 omap5uevm multi_lpae_defconfig : FAILED 1:14.60 panda omap2plus_defconfig : FAILED 1:13.06 panda multi_v7_defconfig : FAILED 1:14.59 seaboard multi_v7_defconfig : FAILED 3:01.75 snowball multi_v7_defconfig : FAILED 1:11.02 trimslice multi_v7_defconfig : FAILED 3:05.41 wandboard multi_v7_defconfig : FAILED 3:05.43
Successful boards:
apc vt8500_v6_v7_defconfig : passed 1:13.90 arndale exynos_defconfig : passed 1:03.62 capri bcm_defconfig : warnings 0:42.28 sama5 sama5_defconfig : passed 1:49.22 seaboard tegra_defconfig : passed 0:58.56 snow exynos_defconfig : passed 1:30.80 snowball u8500_defconfig : passed 1:26.36 trimslice tegra_defconfig : passed 0:56.01 wandboard imx_v6_v7_defconfig : passed 1:02.64
Offline boards:
dalmore tegra_defconfig : OFFLINE 1:03.97 hummingboard imx_v6_v7_defconfig : OFFLINE 1:03.77 hummingboard multi_v7_defconfig : OFFLINE 1:03.72
Board legend is available at http://arm-soc.lixom.net/boards.html
Last entries of failed logs below:
========================================================================
Board bbb-multi_v7_defconfig failure log: -------------------------------------------------
TFTP from server 172.16.1.3; our IP address is 172.16.1.110 Filename 'next/next-20140318/multi_v7_defconfig/zImage'. Load address: 0x80200000 Loading: *################################################################# ################################################################# #########node: bbb status: on ######################################################## ################################################################# ##################################################### 1.2 MiB/s done Bytes transferred = 4581720 (45e958 hex) U-Boot# setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 U-Boot# tftp 0x81f00000 next/next-20140318/multi_v7_defconfig/dtbs/am335x-boneblack.dtb tftp 0x81f00000 next/next-20140318/multi_v7_defconfig/dtbs/am335x-boneblack.dtb link up on port 0, speed 100, full duplex Using cpsw device TFTP from server 172.16.1.3; our IP address is 172.16.1.110 Filename 'next/next-20140318/multi_v7_defconfig/dtbs/am335x-boneblack.dtb'. Load address: 0x81f00000 Loading: *### 586.9 KiB/s done Bytes transferred = 29482 (732a hex) U-Boot# setenv bootargs console=ttyO0,115200 root=/dev/mmcblk0p2 rootwait rw debug earlyprintk setenv bootargs console=ttyO0,115200 root=/dev/mmcblk0p2 rootwait rw debug earlyprintk U-Boot# printenv bootargs printenv bootargs bootargs=console=ttyO0,115200 root=/dev/mmcblk0p2 rootwait rw debug earlyprintk U-Boot# bootz 0x80200000 - 0x81f00000 bootz 0x80200000 - 0x81f00000 ## Flattened Device Tree blob at 81f00000 Booting using the fdt blob at 0x81f00000 Using Device Tree in place at 81f00000, end 81f0a329
Starting kernel ...
~$off # PYBOOT: Exception: timeout
========================================================================
Board bbb-omap2plus_defconfig failure log: -------------------------------------------------
Using cpsw device TFTP from server 172.16.1.3; our IP address is 172.16.1.110 Filename 'next/next-20140318/omap2plus_defconfig/zImage'. Load address: 0x80200000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################## 1.2 MiB/s done Bytes transferred = 4306552 (41b678 hex) U-Boot# setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 U-Boot# tftp 0x81f00000 next/next-20140318/omap2plus_defconfig/dtbs/am335x-boneblack.dtb tftp 0x81f00000 next/next-20140318/omap2plus_defconfig/dtbs/am335x-boneblack.dtb link up on port 0, speed 100, full duplex Using cpsw device TFTP from server 172.16.1.3; our IP address is 172.16.1.110 Filename 'next/next-20140318/omap2plus_defconfig/dtbs/am335x-boneblack.dtb'. Load address: 0x81f00000 Loading: *### 543 KiB/s done Bytes transferred = 29482 (732a hex) U-Boot# setenv bootargs console=ttyO0,115200 root=/dev/mmcblk0p2 rootwait rw debug earlyprintk setenv bootargs console=ttyO0,115200 root=/dev/mmcblk0p2 rootwait rw debug earlyprintk U-Boot# printenv bootargs printenv bootargs bootargs=console=ttyO0,115200 root=/dev/mmcblk0p2 rootwait rw debug earlyprintk U-Boot#bootz 0x80200000 - 0x81f00000 bootz 0x80200000 - 0x81f00000 ## Flattened Device Tree blob at 81f00000 Booting using the fdt blob at 0x81f00000 Using Device Tree in place at 81f00000, end 81f0a329
Starting kernel ...
~$off # PYBOOT: Exception: timeout
========================================================================
Board beaver-multi_v7_defconfig failure log: -------------------------------------------------
[ 3.645310] pci 0000:00:01.0: bridge window [mem 0x28000000-0x280fffff 64bit pref] [ 3.653052] pci 0000:00:01.0: nv_msi_ht_cap_quirk didn't locate host bridge [ 3.660133] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 3.665725] r8169 0000:01:00.0: enabling device (0140 -> 0143) [ 3.672082] r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xf002e000, 02:04:4b:01:60:99, XID 0c900800 IRQ 472 [ 3.682077] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 3.692350] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.698978] [drm] No driver support for vblank timestamp query. [ 3.704930] host1x drm: No connectors reported connected with modes [ 3.711186] [drm] Cannot find any crtc or sizes - going 1024x768 [ 3.729703] Console: switching to colour frame buffer device 128x48 [ 3.741738] host1x drm: fb0: frame buffer device [ 3.746448] host1x drm: registered panic notifier [ 3.751145] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.757341] platform 7d004000.usb: Driver tegra-ehci requests probe deferral [ 3.764724] platform 7d008000.usb: Driver tegra-ehci requests probe deferral [ 3.776076] tegra-ehci 7d004000.usb: EHCI Host Controller [ 3.781475] tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1 [ 3.789272] tegra-ehci 7d004000.usb: irq 53, io mem 0x7d004000 [ 3.813051] tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.00 [ 3.819419] hub 1-0:1.0: USB hub found [ 3.823195] hub 1-0:1.0: 1 port detected [ 3.827524] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.832919] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 3.840722] tegra-ehci 7d008000.usb: irq 129, io mem 0x7d008000 [ 3.863051] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.00 [ 3.869337] hub 2-0:1.0: USB hub found [ 3.873112] hub 2-0:1.0: 1 port detected [ 3.880989] tps65910-rtc tps65910-rtc: setting system clock to 2000-01-01 00:00:02 UTC (946684802) [ 3.893795] ALSA device list: [ 3.896761] #0: NVIDIA Tegra Beaver [ 3.902933] EXT4-fs (mmcblk0p1): couldn't mount as ext3 due to feature incompatibilities [ 3.911853] EXT4-fs (mmcblk0p1): couldn't mount as ext2 due to feature incompatibilities [ 3.927935] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 3.936061] VFS: Mounted root (ext4 filesystem) readonly on device 179:1. [ 3.963071] devtmpfs: mounted [ 3.966468] Freeing unused kernel memory: 544K (c0a4e000 - c0ad6000) [ 4.017244] Internal error: Oops - undefined instruction: 0 [#1] SMP ARM ~$off # PYBOOT: Exception: timeout
========================================================================
Board beaver-tegra_defconfig failure log: -------------------------------------------------
[ 5.368565] Control: 10c5387d Table: a950404a DAC: 00000015 [ 5.374296] Process ps (pid: 330, stack limit = 0xe9428240) [ 5.379854] Stack: (0xe9429e18 to 0xe942a000) [ 5.384199] 9e00: bec4c000 c00c1aac [ 5.392359] 9e20: e9428000 00000013 bec4c000 c00c31dc 00000013 bec4cf54 ea1ff1c0 c00bf524 [ 5.400520] 9e40: e9875680 00000024 c081ef90 c08a7780 c082a0a8 00000001 00000000 00000010 [ 5.408681] 9e60: e9428000 00000001 00000000 c0868d00 c0868d04 00000013 bec4cf54 e9e98000 [ 5.416839] 9e80: 00000000 e9405ac0 ea1ff1c0 00000013 00020248 c00bfa48 00000016 e9429eb4 [ 5.424999] 9ea0: e9429eb0 00000000 e9405af8 e9e98000 ea2fea90 00000000 ffffffff e9405ac0 [ 5.433161] 9ec0: e9e98000 ea1ff1c0 bec4cf54 00000013 00000000 00000013 00020248 c00bfbf0 [ 5.441322] 9ee0: 00000013 00000000 e9405ac0 e9e97690 e9e98000 00001000 ea1ff1c0 c00b2f28 [ 5.449483] 9f00: 00000000 ea1ff1c0 e9e97690 ea1ff1c0 e9e97690 e9e98000 e9429f80 00020000 [ 5.457644] 9f20: b6e05008 00000000 00020248 c01239b4 ea040f00 a0000013 e989f000 e9875680 [ 5.465804] 9f40: b6e05008 e9429f80 e9875680 00020000 b6e05008 c00d98a0 e9875688 00000006 [ 5.473963] 9f60: e9e97690 00000000 00000000 e9875680 e9875680 00020000 b6e05008 c00d9f44 [ 5.482124] 9f80: 00000000 00000000 c000e724 b6e05008 00020000 00000000 00000003 c000e724 [ 5.490285] 9fa0: e9428000 c000e5a0 b6e05008 00020000 00000006 b6e05008 00020000 bec4cb65 [ 5.498446] 9fc0: b6e05008 00020000 00000000 00000003 00020000 00000006 00000020 00020248 [ 5.506605] 9fe0: b6e05008 bec4cb40 b6f58621 b6ed1b0c 40000010 00000006 00000000 00000000 [ 5.514772] [<c00b9018>] (vmacache_find) from [<c00c1aac>] (find_vma+0x10/0x80) [ 5.522071] [<c00c1aac>] (find_vma) from [<c00c31dc>] (find_extend_vma+0x14/0x78) [ 5.529544] [<c00c31dc>] (find_extend_vma) from [<c00bf524>] (__get_user_pages.part.104+0xb0/0x49c) [ 5.538575] [<c00bf524>] (__get_user_pages.part.104) from [<c00bfa48>] (__access_remote_vm+0xb8/0x128) [ 5.547866] [<c00bfa48>] (__access_remote_vm) from [<c00bfbf0>] (access_process_vm+0x48/0x60) [ 5.556373] [<c00bfbf0>] (access_process_vm) from [<c00b2f28>] (get_cmdline+0x70/0xf0) [ 5.564278] [<c00b2f28>] (get_cmdline) from [<c01239b4>] (proc_info_read+0x98/0xdc) [ 5.571923] [<c01239b4>] (proc_info_read) from [<c00d98a0>] (vfs_read+0x90/0x138) [ 5.579394] [<c00d98a0>] (vfs_read) from [<c00d9f44>] (SyS_read+0x40/0x94) [ 5.586261] [<c00d9f44>] (SyS_read) from [<c000e5a0>] (ret_fast_syscall+0x0/0x30) [ 5.593729] Code: e1500002 1a000001 e1a00003 e8bd8010 (e7f001f2) [ 5.599811] ---[ end trace 0f3b8b1d5d40b31c ]--- [ 26.626913] INFO: rcu_preempt detected stalls on CPUs/tasks: {} (detected by 3, t=2102 jiffies, g=4294967085, c=4294967084, q=215) [ 26.638651] INFO: Stall ended before state dump start [ 87.546960] random: nonblocking pool is initialized [ 89.676912] INFO: rcu_preempt detected stalls on CPUs/tasks: {} (detected by 3, t=8407 jiffies, g=4294967085, c=4294967084, q=219) [ 89.688644] INFO: Stall ended before state dump start [ 152.726906] INFO: rcu_preempt detected stalls on CPUs/tasks: {} (detected by 3, t=14712 jiffies, g=4294967085, c=4294967084, q=219) [ 152.738724] INFO: Stall ended before state dump start ~$off # PYBOOT: Exception: timeout
========================================================================
Board capri-multi_v7_defconfig failure log: -------------------------------------------------
[ 0.930000] mmcblk0boot1: unknown partition table [ 0.940000] mmcblk0boot0: unknown partition table [ 0.990000] EXT4-fs (mmcblk0p8): mounted filesystem with ordered data mode. Opts: (null) [ 1.000000] VFS: Mounted root (ext4 filesystem) readonly on device 179:8. [ 1.000000] devtmpfs: mounted [ 1.010000] Freeing unused kernel memory: 544K (c0a4e000 - c0ad6000) [ 1.030000] Internal error: Oops - undefined instruction: 0 [#1] SMP ARM [ 1.030000] Alignment trap: not handling instruction e1923f9f at [<c07ba47c>] [ 1.030000] Unhandled fault: alignment exception (0x001) at 0x20736eae [ 1.030000] Internal error: : 1 [#2] SMP ARM [ 1.030000] Modules linked in: [ 1.030000] CPU: 0 PID: 29042 Comm: %s [ 1.030000] Not tainted 3.14.0-rc7-next-20140318 #1 [ 1.030000] task: c0990074 ti: ed83a000 task.ti: 70737573 [ 1.030000] PC is at _raw_spin_lock_irqsave+0x14/0x4c [ 1.030000] LR is at __down_read_trylock+0x14/0x54 [ 1.030000] pc : [<c07ba480>] lr : [<c027d150>] psr: 40000193 [ 1.030000] sp : ed83bed8 ip : c0ae2388 fp : ed83bfc0 [ 1.030000] r10: 00000028 r9 : 20736eaa r8 : 0000017c [ 1.030000] r7 : c0990074 r6 : 00000017 r5 : 20736eae r4 : 20736eaa [ 1.030000] r3 : 00000193 r2 : 20736eae r1 : 00000000 r0 : 40000193 [ 1.030000] Flags: nZcv IRQs off FIQs on Mode SVC_32 ISA ARM Segment user [ 1.030000] Control: 10c5387d Table: bdbec04a DAC: 00000015 [ 1.030000] Process %s [ 1.030000] (pid: 29042, stack limit = 0x707377c3) [ 1.030000] Stack: (0xed83bed8 to 0x70739573) [ 1.030000] [<c07ba480>] (_raw_spin_lock_irqsave) from [<c027d150>] (__down_read_trylock+0x14/0x54) [ 1.030000] [<c027d150>] (__down_read_trylock) from [<c0217d8c>] (do_page_fault+0x78/0x27c) [ 1.030000] [<c0217d8c>] (do_page_fault) from [<c02083d4>] (do_DataAbort+0x38/0x98) [ 1.030000] [<c02083d4>] (do_DataAbort) from [<c0212218>] (__dabt_svc+0x38/0x60) [ 1.030000] Exception stack(0xed83bfc0 to 0xed83c008) [ 1.030000] bfc0: 0000017c 00000017 ed83c000 00000193 ed83c008 c0217d14 00000017 00000000 [ 1.030000] bfe0: 0000017c 00000000 ed85a000 ed83c0e0 c0ae2388 ed83c008 c02083d4 c0217d40 [ 1.030000] c000: 00000193 ffffffff [ 1.030000] Code: e10f0000 f10c0080 f592f000 e1923f9f (e2831801) [ 1.030000] ---[ end trace 46f1c11beaf6162c ]--- [ 1.030000] Alignment trap: not handling instruction e1923f9f at [<c07ba47c>] [ 1.030000] Unhandled fault: alignment exception (0x001) at 0x20736eae ~$off # PYBOOT: Exception: timeout
========================================================================
Board cubie-multi_v7_defconfig failure log: -------------------------------------------------
tftp 0x40008000 next/next-20140318/multi_v7_defconfig/zImage Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.140 Filename 'next/next-20140318/multi_v7_defconfig/zImage'. Load address: 0x40008000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ##################################################### 2.7 MiB/s done Bytes transferred = 4581720 (45e958 hex) sun4i#setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 sun4i#tftp 0x41000000 next/next-20140318/multi_v7_defconfig/dtbs/sun4i-a10-cubieboard.dtb tftp 0x41000000 next/next-20140318/multi_v7_defconfig/dtbs/sun4i-a10-cubieboard.dtbnode: cubie status: on
Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.140 Filename 'next/next-20140318/multi_v7_defconfig/dtbs/sun4i-a10-cubieboard.dtb'. Load address: 0x41000000 Loading: *## 617.2 KiB/s done Bytes transferred = 15180 (3b4c hex) sun4i#printenv bootargs printenv bootargs bootargs=console=ttyS0,115200n8 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/cubie ip=dhcp sun4i#bootz 0x40008000 - 0x41000000 bootz 0x40008000 - 0x41000000 Kernel image @ 0x40008000 [ 0x000000 - 0x45e958 ] ## Flattened Device Tree blob at 41000000 Booting using the fdt blob at 0x41000000 Loading Device Tree to 40ff9000, end 40fffb4b ... OK
Starting kernel ...
~$off # PYBOOT: Exception: timeout
========================================================================
Board cubie-sunxi_defconfig failure log: -------------------------------------------------
DHCP client bound to address 172.16.1.140 sun4i#setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 sun4i#tftp 0x40008000 next/next-20140318/sunxi_defconfig/zImage tftp 0x40008000 next/next-20140318/sunxi_defconfig/zImage Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.140 Filename 'next/next-20140318/sunxi_defconfig/zImage'. Load address: 0x40008000 Loading: *################################################################# ########################################################## 2.4 MiB/s done Bytes transferred = 1800928 (1b7ae0 hex) sun4i#setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 sun4i#tftp 0x41000000 next/next-20140318/sunxi_defconfig/dtbs/sun4i-a10-cubieboard.dtb tftp 0x41000000 next/next-20140318/sunxi_defconfig/dtbs/sun4i-a10-cubieboard.dtb Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.140 Filename 'next/next-20140318/sunxi_defconfig/dtbs/sun4i-a10-cubieboard.dtb'. Load address: 0x41000000 Loading: *## 449.2 KiB/s done Bytes transferred = 15180 (3b4c hex) sun4i#printenv bootargs printenv bootargs bootargs=console=ttyS0,115200n8 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/cubie ip=dhcp sun4i#bootz 0x40008000 - 0x41000000 bootz 0x40008000 - 0x41000000 Kernel image @ 0x40008000 [ 0x000000 - 0x1b7ae0 ] ## Flattened Device Tree blob at 41000000 Booting using the fdt blob at 0x41000000 Loading Device Tree to 40ff9000, end 40fffb4b ... OK
Starting kernel ...
~$off # PYBOOT: Exception: timeout
========================================================================
Board cubie2-multi_lpae_defconfig failure log: -------------------------------------------------
sun7i# tftp 0x40008000 next/next-20140318/multi_lpae_defconfig/zImage tftp 0x40008000 next/next-20140318/multi_lpae_defconfig/zImage Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.156 Filename 'next/next-20140318/multi_lpae_defconfig/zImage'. Load address: 0x40008000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ###################################################### 3.8 MiB/s done Bytes transferred = 4607096 (464c78 hex) sun7i# setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 sun7i# tftp 0x41000000 next/next-20140318/multi_lpae_defconfig/dtbs/sun7i-a20-cubieboard2.dtb tftp 0x41000000 next/next-20140318/multi_lpae_defconfig/dtbs/sun7i-a20-cubieboard2.dtb Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.156 Filename 'next/next-20140318/multi_lpae_defconfig/dtbs/sun7i-a20-cubieboard2.dtb'. Load address: 0x41000000 Loading: *## 683.6 KiB/s done Bytes transferred = 18209 (4721 hex) sun7i# printenv bootargs printenv bootargs bootargs=console=ttyS0,115200n8 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/cubie2 ip=dhcp sun7i# bootz 0x40008000 - 0x41000000 bootz 0x40008000 - 0x41000000 Kernel image @ 0x40008000 [ 0x000000 - 0x464c78 ] ## Flattened Device Tree blob at 41000000 Booting using the fdt blob at 0x41000000 Loading Device Tree to 40ff8000, end 40fff720 ... OK
Starting kernel ...
~$off # PYBOOT: Exception: timeout
========================================================================
Board cubie2-multi_v7_defconfig failure log: -------------------------------------------------
tftp 0x40008000 next/next-20140318/multi_v7_defconfig/zImage Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.156 Filename 'next/next-20140318/multi_v7_defconfig/zImage'. Load address: 0x40008000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ##################################################### 4 MiB/s done Bytes transferred = 4581720 (45e958 hex) sun7i# setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 sun7i# tftp 0x41000000 next/next-20140318/multi_v7_defconfig/dtbs/sun7i-a20-cubieboard2.dtb tftp 0x41000000 next/next-20140318/multi_v7_defconfig/dtbs/sun7i-a20-cubieboard2.dtb Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.156 Filename 'next/next-20140318/multi_v7_defconfig/dtbs/sun7i-a20-cubieboard2.dtb'. Load address: 0x41000000 Loading: *## 3.5 MiB/s done Bytes transferred = 18209 (4721 hex) sun7i# printenv bootargs printenv bootargs bootargs=console=ttyS0,115200n8 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/cubie2 ip=dhcp sun7i# bootz 0x40008000 - 0x41000000 bootz 0x40008000 - 0x41000000 Kernel image @ 0x40008000 [ 0x000000 - 0x45e958 ] ## Flattened Device Tree blob at 41000000 Booting using the fdt blob at 0x41000000 Loading Device Tree to 40ff8000, end 40fff720 ... OK
Starting kernel ...
node: cubie2 status: on ~$off # PYBOOT: Exception: timeout
========================================================================
Board cubie2-sunxi_defconfig failure log: -------------------------------------------------
sun7i# setenv serverip 172.16.1.3 setenv serverip 172.16.1node: cubie2 status: on .3 sun7i# tftp 0x40008000 next/next-20140318/sunxi_defconfig/zImage tftp 0x40008000 next/next-20140318/sunxi_defconfig/zImage Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.156 Filename 'next/next-20140318/sunxi_defconfig/zImage'. Load address: 0x40008000 Loading: *################################################################# ########################################################## 3.4 MiB/s done Bytes transferred = 1800928 (1b7ae0 hex) sun7i# setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 sun7i# tftp 0x41000000 next/next-20140318/sunxi_defconfig/dtbs/sun7i-a20-cubieboard2.dtb tftp 0x41000000 next/next-20140318/sunxi_defconfig/dtbs/sun7i-a20-cubieboard2.dtb Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.156 Filename 'next/next-20140318/sunxi_defconfig/dtbs/sun7i-a20-cubieboard2.dtb'. Load address: 0x41000000 Loading: *## 740.2 KiB/s done Bytes transferred = 18209 (4721 hex) sun7i# printenv bootargs printenv bootargs bootargs=console=ttyS0,115200n8 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/cubie2 ip=dhcp sun7i# bootz 0x40008000 - 0x41000000 bootz 0x40008000 - 0x41000000 Kernel image @ 0x40008000 [ 0x000000 - 0x1b7ae0 ] ## Flattened Device Tree blob at 41000000 Booting using the fdt blob at 0x41000000 Loading Device Tree to 40ff8000, end 40fff720 ... OK
Starting kernel ...
~$off # PYBOOT: Exception: timeout
========================================================================
Board dalmore-multi_lpae_defconfig failure log: -------------------------------------------------
Tegra114 (Dalmore) # tftp 0x82000000 next/next-20140318/multi_lpae_defconfig/zImage tftp 0x82000000 next/next-20140318/multi_lpae_defconfig/zImage Using asx0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.129 Filename 'next/next-20140318/multi_lpae_defconfig/zImage'. Load address: 0x82000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ###################################################### 2.8 MiB/s done Bytes transferred = 4607096 (464c78 hex) Tegra114 (Dalmore) # setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 Tegra114 (Dalmore) # tftp 0x83000000 next/next-20140318/multi_lpae_defconfig/dtbs/tegra114-dalmore.dtb tftp 0x83000000 next/next-20140318/multi_lpae_defconfig/dtbs/tegra114-dalmore.dtb Using asx0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.129 Filename 'next/next-20140318/multi_lpae_defconfig/dtbs/tegra114-dalmore.dtb'. Load address: 0x83000000 Loading: *### 977.5 KiB/s done Bytes transferred = 34067 (8513 hex) Tegra114 (Dalmore) # printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 root=/dev/mmcblk0p1 rootwait debug earlyprintk Tegra114 (Dalmore) # bootz 0x82000000 - 0x83000000 bootz 0x82000000 - 0x83000000 Kernel image @ 0x82000000 [ 0x000000 - 0x464c78 ] ## Flattened Device Tree blob at 83000000 Booting using the fdt blob at 0x83000000 Loading Device Tree to 8fff4000, end 8ffff512 ... OK
Starting kernel ...
~$off # PYBOOT: Exception: timeout
========================================================================
Board dalmore-multi_v7_defconfig failure log: -------------------------------------------------
Tegra114 (Dalmore) # tftp 0x82000000 next/next-20140318/multi_v7_defconfig/zImage tftp 0x82000000 next/next-20140318/multi_v7_defconfig/zImage Using asx0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.129 Filename 'next/next-20140318/multi_v7_defconfig/zImage'. Load address: 0x82000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ##################################################### 2.8 MiB/s done Bytes transferred = 4581720 (45e958 hex) Tegra114 (Dalmore) # setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 Tegra114 (Dalmore) # tftp 0x83000000 next/next-20140318/multi_v7_defconfig/dtbs/tegra114-dalmore.dtb tftp 0x83000000 next/next-20140318/multi_v7_defconfig/dtbs/tegra114-dalmore.dtb Using asx0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.129 Filename 'next/next-20140318/multi_v7_defconfig/dtbs/tegra114-dalmore.dtb'. Load address: 0x83000000 Loading: *### 2.5 MiB/s done Bytes transferred = 34067 (8513 hex) Tegra114 (Dalmore) # printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 root=/dev/mmcblk0p1 rootwait debug earlyprintk Tegra114 (Dalmore) # bootz 0x82000000 - 0x83000000 bootz 0x82000000 - 0x83000000 Kernel image @ 0x82000000 [ 0x000000 - 0x45e958 ] ## Flattened Device Tree blob at 83000000 Booting using the fdt blob at 0x83000000 Loading Device Tree to 8fff4000, end 8ffff512 ... OK
Starting kernel ...
~$off # PYBOOT: Exception: timeout
========================================================================
Board omap5uevm-multi_lpae_defconfig failure log: -------------------------------------------------
Waiting for Ethernet connection... done. Using sms0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.178 Filename 'next/next-20140318/multi_lpae_defconfig/zImage'. Load address: 0x81000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ###################################################### 2.3 MiB/s done Bytes transferred = 4607096 (464c78 hex) U-Boot#setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 U-Boot# tftp 0x82000000 next/next-20140318/multi_lpae_defconfig/dtbs/omap5-uevm.dtb tftp 0x82000000 next/next-20140318/multi_lpae_defconfig/dtbs/omap5-uevm.dtb Waiting for Ethernet connection... done. Using sms0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.178 Filename 'next/next-20140318/multi_lpae_defconfig/dtbs/omap5-uevm.dtb'. Load address: 0x82000000 Loading: *#### 1.4 MiB/s done Bytes transferred = 44884 (af54 hex) U-Boot# printenv bootargs printenv bootargs bootargs=console=ttyO2,115200 root=/dev/mmcblk1p2 rootwait debug U-Boot# bootz 0x81000000 - 0x82000000 bootz 0x81000000 - 0x82000000 Kernel image @ 0x81000000 [ 0x000000 - 0x464c78 ] ## Flattened Device Tree blob at 82000000 Booting using the fdt blob at 0x82000000 Using Device Tree in place at 82000000, end 8200df53
Starting kernel ...
~$off # PYBOOT: Exception: timeout
========================================================================
Board omap5uevm-multi_v7_defconfig failure log: -------------------------------------------------
Waiting for Ethernet connection... done. Using sms0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.178 Filename 'next/next-20140318/multi_v7_defconfig/zImage'. Load address: 0x81000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ##################################################### 2.3 MiB/s done Bytes transferred = 4581720 (45e958 hex) U-Boot# setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 U-Boot# tftp 0x82000000 next/next-20140318/multi_v7_defconfig/dtbs/omap5-uevm.dtb tftp 0x82000000 next/next-20140318/multi_v7_defconfig/dtbs/omap5-uevm.dtb Waiting for Ethernet connection... done. Using sms0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.178 Filename 'next/next-20140318/multi_v7_defconfig/dtbs/omap5-uevm.dtb'. Load address: 0x82000000 Loading: *#### 1.6 MiB/s done Bytes transferred = 44884 (af54 hex) U-Boot#printenv bootargs printenv bootargs bootargs=console=ttyO2,115200 root=/dev/mmcblk1p2 rootwait debug U-Boot# bootz 0x81000000 - 0x82000000 bootz 0x81000000 - 0x82000000 Kernel image @ 0x81000000 [ 0x000000 - 0x45e958 ] ## Flattened Device Tree blob at 82000000 Booting using the fdt blob at 0x82000000 Using Device Tree in place at 82000000, end 8200df53
Starting kernel ...
~$off # PYBOOT: Exception: timeout
========================================================================
Board omap5uevm-omap2plus_defconfig failure log: -------------------------------------------------
Waiting for Ethernet connection... done. Using sms0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.178 Filename 'next/next-20140318/omap2plus_defconfig/zImage'. Load address: 0x81000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################## 2.3 MiB/s done Bytes transferred = 4306552 (41b678 hex) U-Boot# setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 U-Boot# tftp 0x82000000 next/next-20140318/omap2plus_defconfig/dtbs/omap5-uevm.dtb tftp 0x82000000 next/next-20140318/omap2plus_defconfig/dtbs/omap5-uevm.dtb Waiting for Ethernet connection... done. Using sms0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.178 Filename 'next/next-20140318/omap2plus_defconfig/dtbs/omap5-uevm.dtb'. Load address: 0x82000000 Loading: *#### 894.5 KiB/s done Bytes transferred = 44884 (af54 hex) U-Boot# printenv bootargs printenv bootargs bootargs=console=ttyO2,115200 root=/dev/mmcblk1p2 rootwait debug U-Boot# bootz 0x81000000 - 0x82000000 bootz 0x81000000 - 0x82000000 Kernel image @ 0x81000000 [ 0x000000 - 0x41b678 ] ## Flattened Device Tree blob at 82000000 Booting using the fdt blob at 0x82000000 Using Device Tree in place at 82000000, end 8200df53
Starting kernel ...
~$off # PYBOOT: Exception: timeout
========================================================================
Board panda-multi_v7_defconfig failure log: -------------------------------------------------
################################################################# ################################################################# ################################################################# ##################################################### done Bytes transferred = 4581784 (45e998 hex) Panda # setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 Panda # tftp 0x81f00000 next/next-20140318/multi_v7_defconfig/dtbs/omap4-panda-es.dtb tftp 0x81f00000 next/next-20140318/multi_v7_defconfig/dtbs/omap4-panda-es.dtb Waiting for Ethernet connection... done. Using sms0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.182 Filename 'next/next-20140318/multi_v7_defconfig/dtbs/omap4-panda-es.dtb'. Load address: 0x81f00000 Loading: *#### done Bytes transferred = 52383 (cc9f hex) Panda # printenv bootargs printenv bootargs bootargs=console=ttyO2,115200 root=/dev/mmcblk0p2 rootwait debug earlyprintk Panda # bootm 0x82000000 - 0x81f00000 bootm 0x82000000 - 0x81f00000 ## Booting kernel from Legacy Image at 82000000 ... Image Name: Linux Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 4581720 Bytes = 4.4 MiB Load Address: 80008000 Entry Point: 80008000 Verifying Checksum ... OK ## Flattened Device Tree blob at 81f00000 Booting using the fdt blob at 0x81f00000 Loading Kernel Image ... OK OK Using Device Tree in place at 81f00000, end 81f0fc9e
Starting kernel ...
~$off # PYBOOT: Exception: timeout
========================================================================
Board panda-omap2plus_defconfig failure log: -------------------------------------------------
################################################################# ################################################################# ################################################################# ################################## done Bytes transferred = 4306616 (41b6b8 hex) Panda # setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 Panda # tftp 0x81f00000 next/next-20140318/omap2plus_defconfig/dtbs/omap4-panda-es.dtb tftp 0x81f00000 next/next-20140318/omap2plus_defconfig/dtbs/omap4-panda-es.dtb Waiting for Ethernet connection... done. Using sms0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.182 Filename 'next/next-20140318/omap2plus_defconfig/dtbs/omap4-panda-es.dtb'. Load address: 0x81f00000 Loading: *#### done Bytes transferred = 52383 (cc9f hex) Panda # printenv bootargs printenv bootargs bootargs=console=ttyO2,115200 root=/dev/mmcblk0p2 rootwait debug earlyprintk Panda # bootm 0x82000000 - 0x81f00000 bootm 0x82000000 - 0x81f00000 ## Booting kernel from Legacy Image at 82000000 ... Image Name: Linux Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 4306552 Bytes = 4.1 MiB Load Address: 80008000 Entry Point: 80008000 Verifying Checksum ... OK ## Flattened Device Tree blob at 81f00000 Booting using the fdt blob at 0x81f00000 Loading Kernel Image ... OK OK Using Device Tree in place at 81f00000, end 81f0fc9e
Starting kernel ...
~$off # PYBOOT: Exception: timeout
========================================================================
Board seaboard-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.918596] tegra-dc 54200000.dc: failed to probe RGB output: -517 [ 1.924809] platform 54200000.dc: Driver tegra-dc requests probe deferral [ 1.933718] platform c5000000.usb: Driver tegra-ehci requests probe deferral [ 1.972068] tegra-ehci c5004000.usb: EHCI Host Controller [ 1.977493] tegra-ehci c5004000.usb: new USB bus registered, assigned bus number 1 [ 1.985298] tegra-ehci c5004000.usb: irq 53, io mem 0xc5004000 [ 2.001951] tegra-ehci c5004000.usb: USB 2.0 started, EHCI 1.00 [ 2.008763] hub 1-0:1.0: USB hub found [ 2.012608] hub 1-0:1.0: 1 port detected [ 2.020038] tegra-ehci c5008000.usb: EHCI Host Controller [ 2.025481] tegra-ehci c5008000.usb: new USB bus registered, assigned bus number 2 [ 2.033215] tegra-ehci c5008000.usb: irq 129, io mem 0xc5008000 [ 2.051945] tegra-ehci c5008000.usb: USB 2.0 started, EHCI 1.00 [ 2.058730] hub 2-0:1.0: USB hub found [ 2.062544] hub 2-0:1.0: 1 port detected [ 2.069255] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.075883] [drm] No driver support for vblank timestamp query. [ 2.143767] Console: switching to colour frame buffer device 170x48 [ 2.166789] host1x drm: fb0: frame buffer device [ 2.171487] host1x drm: registered panic notifier [ 2.176201] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 2.185210] tegra-ehci c5000000.usb: EHCI Host Controller [ 2.190625] tegra-ehci c5000000.usb: new USB bus registered, assigned bus number 3 [ 2.198640] tegra-ehci c5000000.usb: irq 52, io mem 0xc5000000 [ 2.221946] tegra-ehci c5000000.usb: USB 2.0 started, EHCI 1.00 [ 2.228780] hub 3-0:1.0: USB hub found [ 2.232600] hub 3-0:1.0: 1 port detected [ 2.237753] input: gpio-keys.4 as /devices/soc0/gpio-keys.4/input/input4 [ 2.245119] tps6586x-rtc tps6586x-rtc: setting system clock to 2014-03-18 17:45:02 UTC (1395164702) [ 2.258472] ALSA device list: [ 2.261439] #0: NVIDIA Tegra Seaboard [ 2.266862] EXT4-fs (mmcblk0p3): mounting ext3 file system using the ext4 subsystem [ 2.303316] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: (null) [ 2.311430] VFS: Mounted root (ext3 filesystem) readonly on device 179:3. [ 2.344268] devtmpfs: mounted [ 2.347752] Freeing unused kernel memory: 544K (c0a4e000 - c0ad6000) [ 2.381989] usb 2-1: new high-speed USB device number 2 using tegra-ehci [ 2.482233] Internal error: Oops - undefined instruction: 0 [#1] SMP ARM ~$off # PYBOOT: Exception: timeout
========================================================================
Board snowball-multi_v7_defconfig failure log: -------------------------------------------------
BOOTP broadcast 2 *** Unhandled DHCP Option in OFFER/ACK: 28 *** Unhandled DHCP Option in OFFER/ACK: 28 DHCP client bound to address 172.16.1.124 U8500 $ setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 U8500 $ tftp 0x00100000 tmp/snowball-6d12U7/tmpdsK3Mr-uImage tftp 0x00100000 tmp/snowball-6d12U7/tmpdsK3Mr-uImage smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC 08:00:08:1e:0f:44 Using smc911x-0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.124 Filename 'tmp/snowball-6d12U7/tmpdsK3Mr-uImage'. Load address: 0x100000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ####################################################### done Bytes transferred = 4623033 (468ab9 hex) U8500 $ printenv bootargs printenv bootargs bootargs=console=ttyAMA2,115200 root=/dev/mmcblk0p4 rootwait rw debug earlyprintk U8500 $ bootm 0x00100000 bootm 0x00100000 ## Booting kernel from Legacy Image at 00100000 ... Image Name: Linux Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 4622969 Bytes = 4.4 MB Load Address: 00008000 Entry Point: 00008000 Loading Kernel Image ... OK OK
Starting kernel ...
~$off # PYBOOT: Exception: timeout
========================================================================
Board trimslice-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.703649] hub 2-0:1.0: USB hub found [ 1.707448] hub 2-0:1.0: 1 port detected [ 1.715420] tegra-ehci c5000000.usb: EHCI Host Controller [ 1.720859] tegra-ehci c5000000.usb: new USB bus registered, assigned bus number 3 [ 1.728704] tegra-ehci c5000000.usb: irq 52, io mem 0xc5000000 [ 1.746886] tegra-ehci c5000000.usb: USB 2.0 started, EHCI 1.00 [ 1.753632] hub 3-0:1.0: USB hub found [ 1.758060] hub 3-0:1.0: 1 port detected [ 1.763135] input: gpio-keys.2 as /devices/soc0/gpio-keys.2/input/input0 [ 1.770518] rtc-em3027 2-0056: setting system clock to 2014-03-18 17:45:11 UTC (1395164711) [ 1.783185] ALSA device list: [ 1.786151] #0: tegra-trimslice [ 1.790151] Waiting for root device /dev/sda1... [ 2.026986] usb 2-1: new high-speed USB device number 2 using tegra-ehci [ 2.179117] hub 2-1:1.0: USB hub found [ 2.183091] hub 2-1:1.0: 4 ports detected [ 2.357042] usb 3-1: new high-speed USB device number 2 using tegra-ehci [ 2.572645] usb-storage 3-1:1.0: USB Mass Storage device detected [ 2.579688] scsi0 : usb-storage 3-1:1.0 [ 2.677220] usb 2-1.1: new high-speed USB device number 3 using tegra-ehci [ 3.140279] asix 2-1.1:1.0 eth1: register 'asix' at usb-c5008000.usb-1.1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:28:b1 [ 4.470311] scsi 0:0:0:0: Direct-Access SanDisk SSD P4 8GB 0015 PQ: 0 ANSI: 0 [ 4.481148] sd 0:0:0:0: [sda] 15649196 512-byte logical blocks: (8.01 GB/7.46 GiB) [ 4.490353] sd 0:0:0:0: [sda] Write Protect is off [ 4.496477] sd 0:0:0:0: [sda] No Caching mode page found [ 4.501888] sd 0:0:0:0: [sda] Assuming drive cache: write through [ 4.512747] sd 0:0:0:0: [sda] No Caching mode page found [ 4.518165] sd 0:0:0:0: [sda] Assuming drive cache: write through [ 4.526394] sda: sda1 [ 4.534248] sd 0:0:0:0: [sda] No Caching mode page found [ 4.539677] sd 0:0:0:0: [sda] Assuming drive cache: write through [ 4.545800] sd 0:0:0:0: [sda] Attached SCSI disk [ 4.552007] EXT4-fs (sda1): couldn't mount as ext3 due to feature incompatibilities [ 4.561512] EXT4-fs (sda1): couldn't mount as ext2 due to feature incompatibilities [ 4.600334] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 4.608163] VFS: Mounted root (ext4 filesystem) on device 8:1. [ 4.630040] devtmpfs: mounted [ 4.634405] Freeing unused kernel memory: 544K (c0a4e000 - c0ad6000) ~$off # PYBOOT: Exception: timeout
========================================================================
Board wandboard-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.543739] LR is at __down_read_trylock+0x14/0x54 [ 1.548534] pc : [<c07ba480>] lr : [<c027d150>] psr: 40000193 [ 1.548534] sp : ec847fd8 ip : c0ae2388 fp : ec8480c0 [ 1.560014] r10: 00000028 r9 : 20736eaa r8 : 0000017c [ 1.565241] r7 : c0990074 r6 : 00000017 r5 : 20736eae r4 : 20736eaa [ 1.571769] r3 : 20000193 r2 : 20736eae r1 : 00000000 r0 : 40000193 [ 1.578302] Flags: nZcv IRQs off FIQs on Mode SVC_32 ISA ARM Segment user [ 1.585526] Control: 10c5387d Table: 3cd1c04a DAC: 00000015 [ 1.591274] Process %s [ 1.591274] (pid: 29042, stack limit = 0x707377c3) [ 1.598587] Stack: (0xec847fd8 to 0x70739573) [ 1.602962] [<c07ba480>] (_raw_spin_lock_irqsave) from [<c027d150>] (__down_read_trylock+0x14/0x54) [ 1.612028] [<c027d150>] (__down_read_trylock) from [<c0217d8c>] (do_page_fault+0x78/0x27c) [ 1.620387] Code: e10f0000 f10c0080 f592f000 e1923f9f (e2831801) [ 1.626487] ---[ end trace 58491b4514c59d22 ]--- [ 1.631109] Alignment trap: not handling instruction e1923f9f at [<c07ba47c>] [ 1.638248] Unhandled fault: alignment exception (0x001) at 0x20736eae [ 60.318549] INFO: rcu_sched self-detected stall on CPU { 2} (t=5884 jiffies g=4294967008 c=4294967007 q=2) [ 60.328360] CPU: 2 PID: 0 Comm: swapper/2 Tainted: G D 3.14.0-rc7-next-20140318 #1 [ 60.336912] [<c0215b8c>] (unwind_backtrace) from [<c0211710>] (show_stack+0x10/0x14) [ 60.344681] [<c0211710>] (show_stack) from [<c07b5710>] (dump_stack+0x88/0x98) [ 60.351923] [<c07b5710>] (dump_stack) from [<c028c9a4>] (rcu_check_callbacks+0x414/0x838) [ 60.360121] [<c028c9a4>] (rcu_check_callbacks) from [<c024fdb8>] (update_process_times+0x40/0x60) [ 60.369011] [<c024fdb8>] (update_process_times) from [<c02970e8>] (tick_sched_timer+0x4c/0x78) [ 60.377636] [<c02970e8>] (tick_sched_timer) from [<c0262fd4>] (__run_hrtimer.isra.33+0x54/0xe4) [ 60.386344] [<c0262fd4>] (__run_hrtimer.isra.33) from [<c02638ec>] (hrtimer_interrupt+0x11c/0x2d0) [ 60.395312] [<c02638ec>] (hrtimer_interrupt) from [<c0295738>] (tick_receive_broadcast+0x2c/0x44) [ 60.404195] [<c0295738>] (tick_receive_broadcast) from [<c0214314>] (handle_IPI+0xdc/0x174) [ 60.412555] [<c0214314>] (handle_IPI) from [<c020889c>] (gic_handle_irq+0x58/0x5c) [ 60.420137] [<c020889c>] (gic_handle_irq) from [<c0212280>] (__irq_svc+0x40/0x50) [ 60.427622] Exception stack(0xec89df60 to 0xec89dfa8) [ 60.432681] df60: 00000000 c0ae3940 c0ae398c 0000004c f8481439 0000000d 0ac1b37c 0000000e [ 60.440863] df80: ed7c1de8 c0ad4de0 00000001 ec89c000 0000001b ec89dfa8 c0667b68 c0667b74 [ 60.449043] dfa0: 60000113 ffffffff [ 60.452558] [<c0212280>] (__irq_svc) from [<c0667b74>] (cpuidle_enter_state+0x68/0x100) [ 60.460584] [<c0667b74>] (cpuidle_enter_state) from [<c0278e0c>] (cpu_startup_entry+0x200/0x230) [ 60.469380] [<c0278e0c>] (cpu_startup_entry) from [<102089e4>] (0x102089e4) [ 60.476700] imx-sdma 20ec000.sdma: firmware not found ~$off # PYBOOT: Exception: timeout