next boot: 20 pass, 24 fail (next-20140318)

18 Mar 2014


      Automated DT boot report for various ARM defconfigs.
Tree/Branch: next
Git describe: next-20140318
Failed boot tests (console logs at the end)
===========================================
            am335x-boneblack:     FAIL:    omap2plus_defconfig
             omap3-beagle-xm:     FAIL:    omap2plus_defconfig
                 omap4-panda:     FAIL:    omap2plus_defconfig
            omap3-overo-tobi:     FAIL:    omap2plus_defconfig
                 am335x-bone:     FAIL:    omap2plus_defconfig
      omap3-overo-storm-tobi:     FAIL:    omap2plus_defconfig
                  omap5-uevm:     FAIL:    omap2plus_defconfig
              omap4-panda-es:     FAIL:    omap2plus_defconfig
                  omap5-uevm:     FAIL:    multi_lpae_defconfig
       sun7i-a20-cubieboard2:     FAIL:    multi_lpae_defconfig
       sun7i-a20-cubieboard2:     FAIL:    sunxi_defconfig
        sun4i-a10-cubieboard:     FAIL:    sunxi_defconfig
                ste-snowball:     FAIL:    multi_v7_defconfig
            am335x-boneblack:     FAIL:    multi_v7_defconfig
             omap3-beagle-xm:     FAIL:    multi_v7_defconfig
       sun7i-a20-cubieboard2:     FAIL:    multi_v7_defconfig
                 omap4-panda:     FAIL:    multi_v7_defconfig
        sun4i-a10-cubieboard:     FAIL:    multi_v7_defconfig
                 bcm28155-ap:     FAIL:    multi_v7_defconfig
            omap3-overo-tobi:     FAIL:    multi_v7_defconfig
                 am335x-bone:     FAIL:    multi_v7_defconfig
      omap3-overo-storm-tobi:     FAIL:    multi_v7_defconfig
                  omap5-uevm:     FAIL:    multi_v7_defconfig
              omap4-panda-es:     FAIL:    multi_v7_defconfig
Full Report
===========
omap2plus_defconfig
-------------------
               legacy,3730xm     PASS:    0 min 53.3 sec
            am335x-boneblack     FAIL:    0 min 29.0 sec
             omap3-beagle-xm     FAIL:    0 min 55.5 sec
           legacy,3530beagle     PASS:    1 min 12.8 sec
                 omap4-panda     FAIL:    0 min 53.9 sec
            omap3-overo-tobi     FAIL:    0 min 28.1 sec
                 am335x-bone     FAIL:    0 min 31.0 sec
      omap3-overo-storm-tobi     FAIL:    0 min 29.3 sec
                  omap5-uevm     FAIL:    0 min 57.9 sec
              omap4-panda-es     FAIL:    1 min  2.4 sec
            legacy,3730storm     PASS:    0 min 20.1 sec
            legacy,3530overo     PASS:    0 min 22.1 sec
multi_lpae_defconfig
--------------------
                  omap5-uevm     FAIL:    0 min 59.5 sec
       sun7i-a20-cubieboard2     FAIL:    0 min 20.0 sec
tegra_defconfig
---------------
              tegra30-beaver     PASS:    0 min 17.2 sec
imx_v6_v7_defconfig
-------------------
  imx6dl-wandboard,wand-dual     PASS:    0 min 19.0 sec
  imx6dl-wandboard,wand-solo     PASS:    0 min 19.0 sec
             imx6q-wandboard     PASS:    0 min 17.3 sec
sunxi_defconfig
---------------
       sun7i-a20-cubieboard2     FAIL:    0 min 19.0 sec
        sun4i-a10-cubieboard     FAIL:    0 min 18.9 sec
bcm_defconfig
-------------
                 bcm28155-ap     PASS:    1 min  4.0 sec
exynos_defconfig
----------------
          exynos5250-arndale     PASS:    1 min  5.8 sec
multi_v7_defconfig
------------------
    qcom-apq8074-dragonboard     PASS:    1 min  9.5 sec
                ste-snowball     FAIL:    0 min 30.6 sec
              tegra30-beaver     PASS:    0 min 19.9 sec
            am335x-boneblack     FAIL:    0 min 28.9 sec
             omap3-beagle-xm     FAIL:    0 min 52.4 sec
       sun7i-a20-cubieboard2     FAIL:    0 min 20.1 sec
          armada-370-mirabox     PASS:    0 min 22.2 sec
                 omap4-panda     FAIL:    0 min 58.7 sec
  armada-xp-openblocks-ax3-4     PASS:    0 min 25.1 sec
        sun4i-a10-cubieboard     FAIL:    0 min 20.0 sec
                 bcm28155-ap     FAIL:    16 min 18.4 sec
            omap3-overo-tobi     FAIL:    0 min 28.2 sec
  imx6dl-wandboard,wand-solo     PASS:    0 min 18.1 sec
                 am335x-bone     FAIL:    0 min 30.6 sec
      omap3-overo-storm-tobi     FAIL:    0 min 26.3 sec
                  omap5-uevm     FAIL:    1 min  0.2 sec
             imx6q-wandboard     PASS:    0 min 18.3 sec
              omap4-panda-es     FAIL:    0 min 57.1 sec
  imx6dl-wandboard,wand-dual     PASS:    0 min 18.6 sec
u8500_defconfig
---------------
                ste-snowball     PASS:    0 min 30.1 sec
sama5_defconfig
---------------
                  sama5d35ek     PASS:    0 min 17.0 sec
davinci_all_defconfig
---------------------
             legacy,dm365evm     PASS:    0 min 17.9 sec
Console logs for failures
=========================
omap2plus_defconfig
-------------------
am335x-boneblack: FAIL: last 80 lines of boot log:
    --------------------------------------------------
GNU ld (GNU Binutils) 2.22
U-Boot# setenv bootargs console=ttyO0,115200n8 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4
setenv bootargs console=ttyO0,115200n8 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4
U-Boot# setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none'
setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none'
U-Boot# if test -n ${initenv}; then run initenv; fi
if test -n ${initenv}; then run initenv; fi
U-Boot# if test -n ${preboot}; then run preboot; fi
if test -n ${preboot}; then run preboot; fi
U-Boot# setenv autoload no; setenv autoboot no
setenv autoload no; setenv autoboot no
U-Boot# dhcp
dhcp
cpsw Waiting for PHY auto negotiation to complete.. done
link up on port 0, speed 100, full duplex
BOOTP broadcast 1
DHCP client bound to address 192.168.1.150
U-Boot#setenv serverip 192.168.1.2
 setenv serverip 192.168.1.2
U-Boot# if test -n ${netargs}; then run netargs; fi
if test -n ${netargs}; then run netargs; fi
U-Boot# tftp 0x80200000 192.168.1.2:tmp/am335xboneb-GNBffp/zImage
tftp 0x80200000 192.168.1.2:tmp/am335xboneb-GNBffp/zImage
link up on port 0, speed 100, full duplex
Using cpsw device
TFTP from server 192.168.1.2; our IP address is 192.168.1.150
Filename 'tmp/am335xboneb-GNBffp/zImage'.
Load address: 0x80200000
Loading: *#################################################################
     #################################################################
     #################################################################
     #################################################################
     ##################################
     1.2 MiB/s
done
Bytes transferred = 4306552 (41b678 hex)
U-Boot# tftp 0x81000000 192.168.1.2:buildroot.cpio.gz.uboot
tftp 0x81000000 192.168.1.2:buildroot.cpio.gz.uboot
link up on port 0, speed 100, full duplex
Using cpsw device
TFTP from server 192.168.1.2; our IP address is 192.168.1.150
Filename 'buildroot.cpio.gz.uboot'.
Load address: 0x81000000
Loading: *############################################
     1.2 MiB/s
done
Bytes transferred = 642602 (9ce2a hex)
U-Boot#tftp 0x81f00000 192.168.1.2:tmp/am335xboneb-GNBffp/am335x-boneblack.dtb
 tftp 0x81f00000 192.168.1.2:tmp/am335xboneb-GNBffp/am335x-boneblack.dtb
link up on port 0, speed 100, full duplex
Using cpsw device
TFTP from server 192.168.1.2; our IP address is 192.168.1.150
Filename 'tmp/am335xboneb-GNBffp/am335x-boneblack.dtb'.
Load address: 0x81f00000
Loading: *###
     1 MiB/s
done
Bytes transferred = 29482 (732a hex)
U-Boot#printenv bootargs
 printenv bootargs
bootargs=console=ttyO0,115200n8 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.150:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none
U-Boot#bootz 0x80200000 0x81000000 0x81f00000
 bootz 0x80200000 0x81000000 0x81f00000
## Loading init Ramdisk from Legacy Image at 81000000 ...
   Image Name:   
   Image Type:   ARM Linux RAMDisk Image (uncompressed)
   Data Size:    642538 Bytes = 627.5 KiB
   Load Address: 00000000
   Entry Point:  00000000
## Flattened Device Tree blob at 81f00000
   Booting using the fdt blob at 0x81f00000
   Loading Ramdisk to 9f19a000, end 9f236dea ... OK
   Using Device Tree in place at 81f00000, end 81f0a329
Starting kernel ...
~$off
# PYBOOT: Exception: kernel: ERROR: did not start booting.
# PYBOOT: Time: 29.01 seconds.
# PYBOOT: Result: FAIL
omap3-beagle-xm: FAIL: last 80 lines of boot log:
    -------------------------------------------------
OMAP3 beagleboard.org #if test -n ${preboot}; then run preboot; fi
 if test -n ${preboot}; then run preboot; fi
(Re)start USB...
USB0:   USB EHCI 1.00
scanning bus 0 for devices... 3 USB Device(s) found
       scanning usb for storage devices... 0 Storage Device(s) found
       scanning usb for ethernet devices... 1 Ethernet Device(s) found
OMAP3 beagleboard.org # setenv autoload no; setenv autoboot no
setenv autoload no; setenv autoboot no
OMAP3 beagleboard.org # dhcp
dhcp
ERROR: Need valid 'usbnet_devaddr' to be set
at ether.c:2369/usb_eth_init()
Waiting for Ethernet connection... done.
BOOTP broadcast 1
BOOTP broadcast 2
DHCP client bound to address 192.168.1.190
OMAP3 beagleboard.org #setenv serverip 192.168.1.2
 setenv serverip 192.168.1.2
OMAP3 beagleboard.org # if test -n ${netargs}; then run netargs; fi
if test -n ${netargs}; then run netargs; fi
OMAP3 beagleboard.org # tftp 0x80200000 192.168.1.2:tmp/3730xm-e_7Pet/zImage
tftp 0x80200000 192.168.1.2:tmp/3730xm-e_7Pet/zImage
Waiting for Ethernet connection... done.
Using sms0 device
TFTP from server 192.168.1.2; our IP address is 192.168.1.190
Filename 'tmp/3730xm-e_7Pet/zImage'.
Load address: 0x80200000
Loading: *T #################################################################
     #################################################################
     #################################################################
     #################################################################
     ##################################
     376 KiB/s
done
Bytes transferred = 4306552 (41b678 hex)
OMAP3 beagleboard.org # tftp 0x81000000 192.168.1.2:buildroot.cpio.gz.uboot
tftp 0x81000000 192.168.1.2:buildroot.cpio.gz.uboot
Waiting for Ethernet connection... done.
Using sms0 device
TFTP from server 192.168.1.2; our IP address is 192.168.1.190
Filename 'buildroot.cpio.gz.uboot'.
Load address: 0x81000000
Loading: *T ############################################
     104.5 KiB/s
done
Bytes transferred = 642602 (9ce2a hex)
OMAP3 beagleboard.org # tftp 0x81f00000 192.168.1.2:tmp/3730xm-e_7Pet/omap3-beagle-xm.dtb
tftp 0x81f00000 192.168.1.2:tmp/3730xm-e_7Pet/omap3-beagle-xm.dtb
Waiting for Ethernet connection... done.
Using sms0 device
TFTP from server 192.168.1.2; our IP address is 192.168.1.190
Filename 'tmp/3730xm-e_7Pet/omap3-beagle-xm.dtb'.
Load address: 0x81f00000
Loading: *T ####
     8.8 KiB/s
done
Bytes transferred = 58597 (e4e5 hex)
OMAP3 beagleboard.org # printenv bootargs
printenv bootargs
bootargs=console=ttyO2,115200n8 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.190:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none
OMAP3 beagleboard.org #bootz 0x80200000 0x81000000 0x81f00000
 bootz 0x80200000 0x81000000 0x81f00000
## Loading init Ramdisk from Legacy Image at 81000000 ...
   Image Name:   
   Image Type:   ARM Linux RAMDisk Image (uncompressed)
   Data Size:    642538 Bytes = 627.5 KiB
   Load Address: 00000000
   Entry Point:  00000000
## Flattened Device Tree blob at 81f00000
   Booting using the fdt blob at 0x81f00000
   Loading Ramdisk to 8ff63000, end 8ffffdea ... OK
   Loading Device Tree to 8ff51000, end 8ff624e4 ... OK
Starting kernel ...
~$off
# PYBOOT: Exception: kernel: ERROR: did not start booting.
# PYBOOT: Time: 55.46 seconds.
# PYBOOT: Result: FAIL
omap4-panda: FAIL: last 80 lines of boot log:
    ---------------------------------------------
setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none'
Panda # if test -n ${initenv}; then run initenv; fi
if test -n ${initenv}; then run initenv; fi
Panda # if test -n ${preboot}; then run preboot; fi
if test -n ${preboot}; then run preboot; fi
(Re)start USB...
USB0:   USB EHCI 1.00
scanning bus 0 for devices... 3 USB Device(s) found
       scanning usb for storage devices... 0 Storage Device(s) found
       scanning usb for ethernet devices... 1 Ethernet Device(s) found
Panda # setenv autoload no; setenv autoboot no
setenv autoload no; setenv autoboot no
Panda # dhcp
dhcp
Waiting for Ethernet connection... done.
BOOTP broadcast 1
BOOTP broadcast 2
DHCP client bound to address 192.168.1.152
Panda # setenv serverip 192.168.1.2
setenv serverip 192.168.1.2
Panda # if test -n ${netargs}; then run netargs; fi
if test -n ${netargs}; then run netargs; fi
Panda # tftp 0x82000000 192.168.1.2:tmp/4430panda-jkNrcl/zImage
tftp 0x82000000 192.168.1.2:tmp/4430panda-jkNrcl/zImage
Waiting for Ethernet connection... done.
Using sms0 device
TFTP from server 192.168.1.2; our IP address is 192.168.1.152
Filename 'tmp/4430panda-jkNrcl/zImage'.
Load address: 0x82000000
Loading: *T #################################################################
     #################################################################
     #################################################################
     #################################################################
     ##################################
     601.6 KiB/s
done
Bytes transferred = 4306552 (41b678 hex)
Panda # tftp 0x81000000 192.168.1.2:buildroot.cpio.gz.uboot
tftp 0x81000000 192.168.1.2:buildroot.cpio.gz.uboot
Waiting for Ethernet connection... done.
Using sms0 device
TFTP from server 192.168.1.2; our IP address is 192.168.1.152
Filename 'buildroot.cpio.gz.uboot'.
Load address: 0x81000000
Loading: *T ############################################
     107.4 KiB/s
done
Bytes transferred = 642602 (9ce2a hex)
Panda # tftp 0x81f00000 192.168.1.2:tmp/4430panda-jkNrcl/omap4-panda.dtb
tftp 0x81f00000 192.168.1.2:tmp/4430panda-jkNrcl/omap4-panda.dtb
Waiting for Ethernet connection... done.
Using sms0 device
TFTP from server 192.168.1.2; our IP address is 192.168.1.152
Filename 'tmp/4430panda-jkNrcl/omap4-panda.dtb'.
Load address: 0x81f00000
Loading: *T ####
     9.8 KiB/s
done
Bytes transferred = 51803 (ca5b hex)
Panda # printenv bootargs
printenv bootargs
bootargs=console=ttyO2,115200n8 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.152:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none
Panda # bootz 0x82000000 0x81000000 0x81f00000
bootz 0x82000000 0x81000000 0x81f00000
## Loading init Ramdisk from Legacy Image at 81000000 ...
   Image Name:   
   Image Type:   ARM Linux RAMDisk Image (uncompressed)
   Data Size:    642538 Bytes = 627.5 KiB
   Load Address: 00000000
   Entry Point:  00000000
## Flattened Device Tree blob at 81f00000
   Booting using the fdt blob at 0x81f00000
   Using Device Tree in place at 81f00000, end 81f0fa5a
Starting kernel ...
~$off
# PYBOOT: Exception: kernel: ERROR: did not start booting.
# PYBOOT: Time: 53.92 seconds.
# PYBOOT: Result: FAIL
omap3-overo-tobi: FAIL: last 80 lines of boot log:
    --------------------------------------------------
Overo # if test -n ${preboot}; then run preboot; fi
if test -n ${preboot}; then run preboot; fi
Overo #setenv autoload no; setenv autoboot no
 setenv autoload no; setenv autoboot no
Overo # dhcp
dhcp
smc911x: detected LAN9221 controller
smc911x: phy initialized
smc911x: MAC fe:06:88:cd:08:6f
BOOTP broadcast 1
DHCP client bound to address 192.168.1.155
Overo # setenv serverip 192.168.1.2
setenv serverip 192.168.1.2
Overo #if test -n ${netargs}; then run netargs; fi
 if test -n ${netargs}; then run netargs; fi
Overo # tftp 0x80200000 192.168.1.2:tmp/3530overo-WkZiKU/zImage
tftp 0x80200000 192.168.1.2:tmp/3530overo-WkZiKU/zImage
smc911x: detected LAN9221 controller
smc911x: phy initialized
smc911x: MAC fe:06:88:cd:08:6f
Using smc911x-0 device
TFTP from server 192.168.1.2; our IP address is 192.168.1.155
Filename 'tmp/3530overo-WkZiKU/zImage'.
Load address: 0x80200000
Loading: *#################################################################
     #################################################################
     #################################################################
     #################################################################
     ##################################
     2.4 MiB/s
done
Bytes transferred = 4306552 (41b678 hex)
Overo # tftp 0x81000000 192.168.1.2:buildroot.cpio.gz.uboot
tftp 0x81000000 192.168.1.2:buildroot.cpio.gz.uboot
smc911x: detected LAN9221 controller
smc911x: phy initialized
smc911x: MAC fe:06:88:cd:08:6f
Using smc911x-0 device
TFTP from server 192.168.1.2; our IP address is 192.168.1.155
Filename 'buildroot.cpio.gz.uboot'.
Load address: 0x81000000
Loading: *############################################
     2.4 MiB/s
done
Bytes transferred = 642602 (9ce2a hex)
Overo # tftp 0x81f00000 192.168.1.2:tmp/3530overo-WkZiKU/omap3-overo-tobi.dtb
tftp 0x81f00000 192.168.1.2:tmp/3530overo-WkZiKU/omap3-overo-tobi.dtb
smc911x: detected LAN9221 controller
smc911x: phy initialized
smc911x: MAC fe:06:88:cd:08:6f
Using smc911x-0 device
TFTP from server 192.168.1.2; our IP address is 192.168.1.155
Filename 'tmp/3530overo-WkZiKU/omap3-overo-tobi.dtb'.
Load address: 0x81f00000
Loading: *#####
     2.2 MiB/s
done
Bytes transferred = 61262 (ef4e hex)
Overo # printenv bootargs
printenv bootargs
bootargs=console=ttyO2,115200n8 earlyprintk debug rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.155:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none
Overo # bootz 0x80200000 0x81000000 0x81f00000
bootz 0x80200000 0x81000000 0x81f00000
## Loading init Ramdisk from Legacy Image at 81000000 ...
   Image Name:   
   Image Type:   ARM Linux RAMDisk Image (uncompressed)
   Data Size:    642538 Bytes = 627.5 KiB
   Load Address: 00000000
   Entry Point:  00000000
## Flattened Device Tree blob at 81f00000
   Booting using the fdt blob at 0x81f00000
   Loading Ramdisk to 8ff63000, end 8ffffdea ... OK
   Loading Device Tree to 8ff51000, end 8ff62f4d ... OK
Starting kernel ...
~$off
# PYBOOT: Exception: kernel: ERROR: did not start booting.
# PYBOOT: Time: 28.05 seconds.
# PYBOOT: Result: FAIL
am335x-bone: FAIL: last 80 lines of boot log:
    ---------------------------------------------
GNU ld (GNU Binutils for Ubuntu) 2.22.90.20120919
U-Boot# setenv bootargs console=ttyO0,115200n8 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none'
U-Boot# setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none'if test -n ${initenv}; then run initenv; fi
U-Boot# if test -n ${initenv}; then run initenv; fiif test -n ${preboot}; then run preboot; fi
U-Boot# if test -n ${preboot}; then run preboot; fisetenv autoload no; setenv autoboot no
U-Boot# setenv autoload no; setenv autoboot nodhcp
U-Boot# dhcp
cpsw Waiting for PHY auto negotiation to complete.. done
link up on port 0, speed 100, full duplex
BOOTP broadcast 1
BOOTP broadcast 2
DHCP client bound to address 192.168.1.198
U-Boot# setenv serverip 192.168.1.2
setenv serverip 192.168.1.2
U-Boot# if test -n ${netargs}; then run netargs; fi
if test -n ${netargs}; then run netargs; fi
U-Boot# tftp 0x80200000 192.168.1.2:tmp/am335xbone-8yEmdK/zImage
tftp 0x80200000 192.168.1.2:tmp/am335xbone-8yEmdK/zImage
link up on port 0, speed 100, full duplex
Using cpsw device
TFTP from server 192.168.1.2; our IP address is 192.168.1.198
Filename 'tmp/am335xbone-8yEmdK/zImage'.
Load address: 0x80200000
Loading: *#################################################################
     #################################################################
     #################################################################
     #################################################################
     ##################################
     1.2 MiB/s
done
Bytes transferred = 4306552 (41b678 hex)
U-Boot# tftp 0x81000000 192.168.1.2:buildroot.cpio.gz.uboot
tftp 0x81000000 192.168.1.2:buildroot.cpio.gz.uboot
link up on port 0, speed 100, full duplex
Using cpsw device
TFTP from server 192.168.1.2; our IP address is 192.168.1.198
Filename 'buildroot.cpio.gz.uboot'.
Load address: 0x81000000
Loading: *############################################
     1.1 MiB/s
done
Bytes transferred = 642602 (9ce2a hex)
U-Boot# tftp 0x81f00000 192.168.1.2:tmp/am335xbone-8yEmdK/am335x-bone.dtb
tftp 0x81f00000 192.168.1.2:tmp/am335xbone-8yEmdK/am335x-bone.dtb
link up on port 0, speed 100, full duplex
Using cpsw device
TFTP from server 192.168.1.2; our IP address is 192.168.1.198
Filename 'tmp/am335xbone-8yEmdK/am335x-bone.dtb'.
Load address: 0x81f00000
Loading: *##
     1.1 MiB/s
done
Bytes transferred = 28886 (70d6 hex)
U-Boot# printenv bootargs
printenv bootargs
bootargs=console=ttyO0,115200n8 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.198:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none
U-Boot# bootz 0x80200000 0x81000000 0x81f00000
bootz 0x80200000 0x81000000 0x81f00000
## Loading init Ramdisk from Legacy Image at 81000000 ...
   Image Name:   
   Image Type:   ARM Linux RAMDisk Image (uncompressed)
   Data Size:    642538 Bytes = 627.5 KiB
   Load Address: 00000000
   Entry Point:  00000000
## Flattened Device Tree blob at 81f00000
   Booting using the fdt blob at 0x81f00000
   Loading Ramdisk to 8f19a000, end 8f236dea ... OK
   Using Device Tree in place at 81f00000, end 81f0a0d5
Starting kernel ...
~$off
# PYBOOT: Exception: kernel: ERROR: did not start booting.
# PYBOOT: Time: 30.96 seconds.
# PYBOOT: Result: FAIL
omap3-overo-storm-tobi: FAIL: last 80 lines of boot log:
    --------------------------------------------------------
Die ID #3dea00029ff80000016830c40802e016
Net:   smc911x-0
Warning: smc911x-0 using MAC address from net device
Hit any key to stop autoboot:  5 
 0 
Overo # 
Overo # version
version
U-Boot 2013.04-00003-g84ebf5d (Jun 21 2013 - 15:36:05)
arm-linux-gnueabi-gcc (Ubuntu/Linaro 4.7.2-1ubuntu1) 4.7.2
GNU ld (GNU Binutils for Ubuntu) 2.22.90.20120919
Overo # setenv bootargs console=ttyO2,115200n8 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4
setenv bootargs console=ttyO2,115200n8 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4
Overo # setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none'
setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none'
Overo # if test -n ${initenv}; then run initenv; fi
if test -n ${initenv}; then run initenv; fi
Overo # if test -n ${preboot}; then run preboot; fi
if test -n ${preboot}; then run preboot; fi
Overo # setenv autoload no; setenv autoboot no
setenv autoload no; setenv autoboot no
Overo # dhcp
dhcp
smc911x: detected LAN9221 controller
smc911x: phy initialized
smc911x: MAC 00:15:c9:28:f0:11
BOOTP broadcast 1
BOOTP broadcast 2
DHCP client bound to address 192.168.1.195
Overo # setenv serverip 192.168.1.2
setenv serverip 192.168.1.2
Overo # if test -n ${netargs}; then run netargs; fi
if test -n ${netargs}; then run netargs; fi
Overo # tftp 0x80200000 192.168.1.2:tmp/3730storm-QV62GJ/zImage
tftp 0x80200000 192.168.1.2:tmp/3730storm-QV62GJ/zImage
smc911x: detected LAN9221 controller
smc911x: phy initialized
smc911x: MAC 00:15:c9:28:f0:11
Using smc911x-0 device
TFTP from server 192.168.1.2; our IP address is 192.168.1.195
Filename 'tmp/3730storm-QV62GJ/zImage'.
Load address: 0x80200000
Loading: *#################################################################
     #################################################################
     #################################################################
     #################################################################
     ##################################
     2.4 MiB/s
done
Bytes transferred = 4306552 (41b678 hex)
Overo # tftp 0x81f00000 192.168.1.2:tmp/3730storm-QV62GJ/omap3-overo-storm-tobi.dtb
tftp 0x81f00000 192.168.1.2:tmp/3730storm-QV62GJ/omap3-overo-storm-tobi.dtb
smc911x: detected LAN9221 controller
smc911x: phy initialized
smc911x: MAC 00:15:c9:28:f0:11
Using smc911x-0 device
TFTP from server 192.168.1.2; our IP address is 192.168.1.195
Filename 'tmp/3730storm-QV62GJ/omap3-overo-storm-tobi.dtb'.
Load address: 0x81f00000
Loading: *#####
     2.3 MiB/s
done
Bytes transferred = 62106 (f29a hex)
Overo # printenv bootargs
printenv bootargs
bootargs=console=ttyO2,115200n8 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.195:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none
Overo # bootz 0x80200000 - 0x81f00000
bootz 0x80200000 - 0x81f00000
## Flattened Device Tree blob at 81f00000
   Booting using the fdt blob at 0x81f00000
   Loading Device Tree to 8ffed000, end 8ffff299 ... OK
Starting kernel ...
~$off
# PYBOOT: Exception: kernel: ERROR: did not start booting.
# PYBOOT: Time: 29.26 seconds.
# PYBOOT: Result: FAIL
omap5-uevm: FAIL: last 80 lines of boot log:
    --------------------------------------------
(Re)start USB...
USB0:   USB EHCI 1.00
scanning bus 0 for devices... found: 002/075 2
3 USB Device(s) found
       scanning usb for storage devices... 0 Storage Device(s) found
       scanning usb for ethernet devices... 1 Ethernet Device(s) found
U-Boot# setenv autoload no; setenv autoboot no
setenv autoload no; setenv autoboot no
U-Boot# dhcp
dhcp
Waiting for Ethernet connection... done.
BOOTP broadcast 1
EHCI timed out on TD - token=0x8008d80
BOOTP broadcast 2
DHCP client bound to address 192.168.1.249
U-Boot#setenv serverip 192.168.1.2
 setenv serverip 192.168.1.2
U-Boot# if test -n ${netargs}; then run netargs; fi
if test -n ${netargs}; then run netargs; fi
U-Boot# tftp 0x82000000 192.168.1.2:tmp/omap5uevm-pT79kB/zImage
tftp 0x82000000 192.168.1.2:tmp/omap5uevm-pT79kB/zImage
Waiting for Ethernet connection... done.
Using sms0 device
TFTP from server 192.168.1.2; our IP address is 192.168.1.249
Filename 'tmp/omap5uevm-pT79kB/zImage'.
Load address: 0x82000000
Loading: *T #################################################################
     #################################################################
     #################################################################
     #################################################################
     ##################################
     482.4 KiB/s
done
Bytes transferred = 4306552 (41b678 hex)
U-Boot# tftp 0x81000000 192.168.1.2:buildroot.cpio.gz.uboot
tftp 0x81000000 192.168.1.2:buildroot.cpio.gz.uboot
Waiting for Ethernet connection... done.
Using sms0 device
TFTP from server 192.168.1.2; our IP address is 192.168.1.249
Filename 'buildroot.cpio.gz.uboot'.
Load address: 0x81000000
Loading: *EHCI timed out on TD - token=0x88008d80
T ############################################
     77.1 KiB/s
done
Bytes transferred = 642602 (9ce2a hex)
U-Boot# tftp 0x80f80000 192.168.1.2:tmp/omap5uevm-pT79kB/omap5-uevm.dtb
tftp 0x80f80000 192.168.1.2:tmp/omap5uevm-pT79kB/omap5-uevm.dtb
Waiting for Ethernet connection... done.
Using sms0 device
TFTP from server 192.168.1.2; our IP address is 192.168.1.249
Filename 'tmp/omap5uevm-pT79kB/omap5-uevm.dtb'.
Load address: 0x80f80000
Loading: *T ####
     7.8 KiB/s
done
Bytes transferred = 44884 (af54 hex)
U-Boot# printenv bootargs
printenv bootargs
bootargs=console=ttyO2,115200n8 debug earlyprintk ip=192.168.1.249:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none
U-Boot# bootz 0x82000000 0x81000000 0x80f80000
bootz 0x82000000 0x81000000 0x80f80000
Kernel image @ 0x82000000 [ 0x000000 - 0x41b678 ]
## Loading init Ramdisk from Legacy Image at 81000000 ...
   Image Name:   
   Image Type:   ARM Linux RAMDisk Image (uncompressed)
   Data Size:    642538 Bytes = 627.5 KiB
   Load Address: 00000000
   Entry Point:  00000000
   Verifying Checksum ... OK
## Flattened Device Tree blob at 80f80000
   Booting using the fdt blob at 0x80f80000
   Using Device Tree in place at 80f80000, end 80f8df53
Starting kernel ...
~$off
# PYBOOT: Exception: kernel: ERROR: did not start booting.
# PYBOOT: Time: 57.89 seconds.
# PYBOOT: Result: FAIL
omap4-panda-es: FAIL: last 80 lines of boot log:
    ------------------------------------------------
if test -n ${initenv}; then run initenv; fi
Panda # if test -n ${preboot}; then run preboot; fi
if test -n ${preboot}; then run preboot; fi
(Re)start USB...
USB0:   USB EHCI 1.00
scanning bus 0 for devices... 3 USB Device(s) found
       scanning usb for storage devices... 0 Storage Device(s) found
       scanning usb for ethernet devices... 1 Ethernet Device(s) found
Panda # setenv autoload no; setenv autoboot no
setenv autoload no; setenv autoboot no
Panda # dhcp
dhcp
Waiting for Ethernet connection... done.
BOOTP broadcast 1
EHCI timed out on TD - token=0x88008d80
BOOTP broadcast 2
DHCP client bound to address 192.168.1.157
Panda # setenv serverip 192.168.1.2
setenv serverip 192.168.1.2
Panda # if test -n ${netargs}; then run netargs; fi
if test -n ${netargs}; then run netargs; fi
Panda # tftp 0x82000000 192.168.1.2:tmp/4460panda-es-pV4tp4/zImage
tftp 0x82000000 192.168.1.2:tmp/4460panda-es-pV4tp4/zImage
Waiting for Ethernet connection... done.
Using sms0 device
TFTP from server 192.168.1.2; our IP address is 192.168.1.157
Filename 'tmp/4460panda-es-pV4tp4/zImage'.
Load address: 0x82000000
Loading: *T #################################################################
     #################################################################
     #################################################################
     #################################################################
     ##################################
     489.3 KiB/s
done
Bytes transferred = 4306552 (41b678 hex)
Panda # tftp 0x81000000 192.168.1.2:buildroot.cpio.gz.uboot
tftp 0x81000000 192.168.1.2:buildroot.cpio.gz.uboot
Waiting for Ethernet connection... done.
Using sms0 device
TFTP from server 192.168.1.2; our IP address is 192.168.1.157
Filename 'buildroot.cpio.gz.uboot'.
Load address: 0x81000000
Loading: *T ############################################
     102.5 KiB/s
done
Bytes transferred = 642602 (9ce2a hex)
Panda # tftp 0x81f00000 192.168.1.2:tmp/4460panda-es-pV4tp4/omap4-panda-es.dtb
tftp 0x81f00000 192.168.1.2:tmp/4460panda-es-pV4tp4/omap4-panda-es.dtb
Waiting for Ethernet connection... done.
Using sms0 device
TFTP from server 192.168.1.2; our IP address is 192.168.1.157
Filename 'tmp/4460panda-es-pV4tp4/omap4-panda-es.dtb'.
Load address: 0x81f00000
Loading: *EHCI timed out on TD - token=0x88008d80
T ####
     4.9 KiB/s
done
Bytes transferred = 52383 (cc9f hex)
Panda # printenv bootargs
printenv bootargs
bootargs=console=ttyO2,115200n8 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.157:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none
Panda # bootz 0x82000000 0x81000000 0x81f00000
bootz 0x82000000 0x81000000 0x81f00000
## Loading init Ramdisk from Legacy Image at 81000000 ...
   Image Name:   
   Image Type:   ARM Linux RAMDisk Image (uncompressed)
   Data Size:    642538 Bytes = 627.5 KiB
   Load Address: 00000000
   Entry Point:  00000000
## Flattened Device Tree blob at 81f00000
   Booting using the fdt blob at 0x81f00000
   Using Device Tree in place at 81f00000, end 81f0fc9e
Starting kernel ...
~$off
# PYBOOT: Exception: kernel: ERROR: did not start booting.
# PYBOOT: Time: 62.35 seconds.
# PYBOOT: Result: FAIL
multi_lpae_defconfig
--------------------
omap5-uevm: FAIL: last 80 lines of boot log:
    --------------------------------------------
(Re)start USB...
USB0:   USB EHCI 1.00
scanning bus 0 for devices... found: 002/075 2
3 USB Device(s) found
       scanning usb for storage devices... 0 Storage Device(s) found
       scanning usb for ethernet devices... 1 Ethernet Device(s) found
U-Boot# setenv autoload no; setenv autoboot no
setenv autoload no; setenv autoboot no
U-Boot# dhcp
dhcp
Waiting for Ethernet connection... done.
BOOTP broadcast 1
EHCI timed out on TD - token=0x8008d80
BOOTP broadcast 2
DHCP client bound to address 192.168.1.249
U-Boot# setenv serverip 192.168.1.2
setenv serverip 192.168.1.2
U-Boot# if test -n ${netargs}; then run netargs; fi
if test -n ${netargs}; then run netargs; fi
U-Boot# tftp 0x82000000 192.168.1.2:tmp/omap5uevm-j5r5GC/zImage
tftp 0x82000000 192.168.1.2:tmp/omap5uevm-j5r5GC/zImage
Waiting for Ethernet connection... done.
Using sms0 device
TFTP from server 192.168.1.2; our IP address is 192.168.1.249
Filename 'tmp/omap5uevm-j5r5GC/zImage'.
Load address: 0x82000000
Loading: *T #################################################################
     #################################################################
     #################################################################
     #################################################################
     ######################################################
     600.6 KiB/s
done
Bytes transferred = 4607096 (464c78 hex)
U-Boot# tftp 0x81000000 192.168.1.2:buildroot.cpio.gz.uboot
tftp 0x81000000 192.168.1.2:buildroot.cpio.gz.uboot
Waiting for Ethernet connection... done.
Using sms0 device
TFTP from server 192.168.1.2; our IP address is 192.168.1.249
Filename 'buildroot.cpio.gz.uboot'.
Load address: 0x81000000
Loading: *EHCI timed out on TD - token=0x88008d80
T ############################################
     93.8 KiB/s
done
Bytes transferred = 642602 (9ce2a hex)
U-Boot# tftp 0x80f80000 192.168.1.2:tmp/omap5uevm-j5r5GC/omap5-uevm.dtb
tftp 0x80f80000 192.168.1.2:tmp/omap5uevm-j5r5GC/omap5-uevm.dtb
Waiting for Ethernet connection... done.
Using sms0 device
TFTP from server 192.168.1.2; our IP address is 192.168.1.249
Filename 'tmp/omap5uevm-j5r5GC/omap5-uevm.dtb'.
Load address: 0x80f80000
Loading: *T ####
     3.9 KiB/s
done
Bytes transferred = 44884 (af54 hex)
U-Boot# printenv bootargs
printenv bootargs
bootargs=console=ttyO2,115200n8 debug earlyprintk ip=192.168.1.249:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none
U-Boot# bootz 0x82000000 0x81000000 0x80f80000
bootz 0x82000000 0x81000000 0x80f80000
Kernel image @ 0x82000000 [ 0x000000 - 0x464c78 ]
## Loading init Ramdisk from Legacy Image at 81000000 ...
   Image Name:   
   Image Type:   ARM Linux RAMDisk Image (uncompressed)
   Data Size:    642538 Bytes = 627.5 KiB
   Load Address: 00000000
   Entry Point:  00000000
   Verifying Checksum ... OK
## Flattened Device Tree blob at 80f80000
   Booting using the fdt blob at 0x80f80000
   Using Device Tree in place at 80f80000, end 80f8df53
Starting kernel ...
~$off
# PYBOOT: Exception: kernel: ERROR: did not start booting.
# PYBOOT: Time: 59.47 seconds.
# PYBOOT: Result: FAIL
sun7i-a20-cubieboard2: FAIL: last 80 lines of boot log:
    -------------------------------------------------------
setenv ethaddr 22:71:81:DA:53:EA
sun7i# setenv bootargs console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4
setenv bootargs console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4
sun7i# setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none'
setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none'
sun7i# setenv initrd_high 0xffffffff
setenv initrd_high 0xffffffff
sun7i# if test -n ${initenv}; then run initenv; fi
if test -n ${initenv}; then run initenv; fi
sun7i# if test -n ${preboot}; then run preboot; fi
if test -n ${preboot}; then run preboot; fi
sun7i# setenv autoload no; setenv autoboot no
setenv autoload no; setenv autoboot no
sun7i# dhcp
dhcp
ENET Speed is 100 Mbps - FULL duplex connection
BOOTP broadcast 1
DHCP client bound to address 192.168.1.153
sun7i# setenv serverip 192.168.1.2
setenv serverip 192.168.1.2
sun7i# if test -n ${netargs}; then run netargs; fi
if test -n ${netargs}; then run netargs; fi
sun7i# tftp 0x40008000 192.168.1.2:tmp/cubie2-tNHSvx/zImage
tftp 0x40008000 192.168.1.2:tmp/cubie2-tNHSvx/zImage
Using emac device
TFTP from server 192.168.1.2; our IP address is 192.168.1.153
Filename 'tmp/cubie2-tNHSvx/zImage'.
Load address: 0x40008000
Loading: *#################################################################
     #################################################################
     #################################################################
     #################################################################
     ######################################################
     2.7 MiB/s
done
Bytes transferred = 4607096 (464c78 hex)
sun7i# tftp 0x42000000 192.168.1.2:buildroot.cpio.gz.uboot
tftp 0x42000000 192.168.1.2:buildroot.cpio.gz.uboot
Using emac device
TFTP from server 192.168.1.2; our IP address is 192.168.1.153
Filename 'buildroot.cpio.gz.uboot'.
Load address: 0x42000000
Loading: *############################################
     2.7 MiB/s
done
Bytes transferred = 642602 (9ce2a hex)
sun7i# tftp 0x41000000 192.168.1.2:tmp/cubie2-tNHSvx/sun7i-a20-cubieboard2.dtb
tftp 0x41000000 192.168.1.2:tmp/cubie2-tNHSvx/sun7i-a20-cubieboard2.dtb
Using emac device
TFTP from server 192.168.1.2; our IP address is 192.168.1.153
Filename 'tmp/cubie2-tNHSvx/sun7i-a20-cubieboard2.dtb'.
Load address: 0x41000000
Loading: *##
     2.2 MiB/s
done
Bytes transferred = 18209 (4721 hex)
sun7i# printenv bootargs
printenv bootargs
bootargs=console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.153:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none
sun7i# bootz 0x40008000 0x42000000 0x41000000
bootz 0x40008000 0x42000000 0x41000000
Kernel image @ 0x40008000 [ 0x000000 - 0x464c78 ]
## Loading init Ramdisk from Legacy Image at 42000000 ...
   Image Name:   
   Created:      2014-02-07  19:37:29 UTC
   Image Type:   ARM Linux RAMDisk Image (uncompressed)
   Data Size:    642538 Bytes = 627.5 KiB
   Load Address: 00000000
   Entry Point:  00000000
   Verifying Checksum ... OK
## Flattened Device Tree blob at 41000000
   Booting using the fdt blob at 0x41000000
   Loading Device Tree to 40ff8000, end 40fff720 ... OK
Starting kernel ...
~$off
# PYBOOT: Exception: kernel: ERROR: did not start booting.
# PYBOOT: Time: 20.01 seconds.
# PYBOOT: Result: FAIL
sunxi_defconfig
---------------
sun7i-a20-cubieboard2: FAIL: last 80 lines of boot log:
    -------------------------------------------------------
arm-linux-gnueabi-gcc (Ubuntu/Linaro 4.7.2-1ubuntu1) 4.7.2
GNU ld (GNU Binutils for Ubuntu) 2.22.90.20120919
sun7i# setenv ethaddr 22:71:81:DA:53:EA
setenv ethaddr 22:71:81:DA:53:EA
sun7i# setenv bootargs console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4
setenv bootargs console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4
sun7i# setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none'
setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none'
sun7i# setenv initrd_high 0xffffffff
setenv initrd_high 0xffffffff
sun7i# if test -n ${initenv}; then run initenv; fi
if test -n ${initenv}; then run initenv; fi
sun7i# if test -n ${preboot}; then run preboot; fi
if test -n ${preboot}; then run preboot; fi
sun7i# setenv autoload no; setenv autoboot no
setenv autoload no; setenv autoboot no
sun7i# dhcp
dhcp
ENET Speed is 100 Mbps - FULL duplex connection
BOOTP broadcast 1
DHCP client bound to address 192.168.1.153
sun7i# setenv serverip 192.168.1.2
setenv serverip 192.168.1.2
sun7i# if test -n ${netargs}; then run netargs; fi
if test -n ${netargs}; then run netargs; fi
sun7i# tftp 0x40008000 192.168.1.2:tmp/cubie2-Ig9ylH/zImage
tftp 0x40008000 192.168.1.2:tmp/cubie2-Ig9ylH/zImage
Using emac device
TFTP from server 192.168.1.2; our IP address is 192.168.1.153
Filename 'tmp/cubie2-Ig9ylH/zImage'.
Load address: 0x40008000
Loading: *#################################################################
     ##########################################################
     2.7 MiB/s
done
Bytes transferred = 1800928 (1b7ae0 hex)
sun7i# tftp 0x42000000 192.168.1.2:buildroot.cpio.gz.uboot
tftp 0x42000000 192.168.1.2:buildroot.cpio.gz.uboot
Using emac device
TFTP from server 192.168.1.2; our IP address is 192.168.1.153
Filename 'buildroot.cpio.gz.uboot'.
Load address: 0x42000000
Loading: *############################################
     2.7 MiB/s
done
Bytes transferred = 642602 (9ce2a hex)
sun7i# tftp 0x41000000 192.168.1.2:tmp/cubie2-Ig9ylH/sun7i-a20-cubieboard2.dtb
tftp 0x41000000 192.168.1.2:tmp/cubie2-Ig9ylH/sun7i-a20-cubieboard2.dtb
Using emac device
TFTP from server 192.168.1.2; our IP address is 192.168.1.153
Filename 'tmp/cubie2-Ig9ylH/sun7i-a20-cubieboard2.dtb'.
Load address: 0x41000000
Loading: *##
     2.2 MiB/s
done
Bytes transferred = 18209 (4721 hex)
sun7i# printenv bootargs
printenv bootargs
bootargs=console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.153:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none
sun7i# bootz 0x40008000 0x42000000 0x41000000
bootz 0x40008000 0x42000000 0x41000000
Kernel image @ 0x40008000 [ 0x000000 - 0x1b7ae0 ]
## Loading init Ramdisk from Legacy Image at 42000000 ...
   Image Name:   
   Created:      2014-02-07  19:37:29 UTC
   Image Type:   ARM Linux RAMDisk Image (uncompressed)
   Data Size:    642538 Bytes = 627.5 KiB
   Load Address: 00000000
   Entry Point:  00000000
   Verifying Checksum ... OK
## Flattened Device Tree blob at 41000000
   Booting using the fdt blob at 0x41000000
   Loading Device Tree to 40ff8000, end 40fff720 ... OK
Starting kernel ...
~$off
# PYBOOT: Exception: kernel: ERROR: did not start booting.
# PYBOOT: Time: 19.00 seconds.
# PYBOOT: Result: FAIL
sun4i-a10-cubieboard: FAIL: last 80 lines of boot log:
    ------------------------------------------------------
arm-linux-gnueabi-gcc (Ubuntu/Linaro 4.7.2-1ubuntu1) 4.7.2
GNU ld (GNU Binutils for Ubuntu) 2.22.90.20120919
sun4i# setenv ethaddr 2e:40:70:f0:12:08
setenv ethaddr 2e:40:70:f0:12:08
sun4i# setenv bootargs console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4
setenv bootargs console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4
sun4i# setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none'
setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none'
sun4i# setenv initrd_high 0xffffffff
setenv initrd_high 0xffffffff
sun4i# if test -n ${initenv}; then run initenv; fi
if test -n ${initenv}; then run initenv; fi
sun4i# if test -n ${preboot}; then run preboot; fi
if test -n ${preboot}; then run preboot; fi
sun4i# setenv autoload no; setenv autoboot no
setenv autoload no; setenv autoboot no
sun4i# dhcp
dhcp
ENET Speed is 100 Mbps - FULL duplex connection
BOOTP broadcast 1
DHCP client bound to address 192.168.1.160
sun4i# setenv serverip 192.168.1.2
setenv serverip 192.168.1.2
sun4i# if test -n ${netargs}; then run netargs; fi
if test -n ${netargs}; then run netargs; fi
sun4i# tftp 0x40008000 192.168.1.2:tmp/cubie-yJnMtq/zImage
tftp 0x40008000 192.168.1.2:tmp/cubie-yJnMtq/zImage
Using emac device
TFTP from server 192.168.1.2; our IP address is 192.168.1.160
Filename 'tmp/cubie-yJnMtq/zImage'.
Load address: 0x40008000
Loading: *#################################################################
     ##########################################################
     2.7 MiB/s
done
Bytes transferred = 1800928 (1b7ae0 hex)
sun4i# tftp 0x42000000 192.168.1.2:buildroot.cpio.gz.uboot
tftp 0x42000000 192.168.1.2:buildroot.cpio.gz.uboot
Using emac device
TFTP from server 192.168.1.2; our IP address is 192.168.1.160
Filename 'buildroot.cpio.gz.uboot'.
Load address: 0x42000000
Loading: *############################################
     2.7 MiB/s
done
Bytes transferred = 642602 (9ce2a hex)
sun4i# tftp 0x41000000 192.168.1.2:tmp/cubie-yJnMtq/sun4i-a10-cubieboard.dtb
tftp 0x41000000 192.168.1.2:tmp/cubie-yJnMtq/sun4i-a10-cubieboard.dtb
Using emac device
TFTP from server 192.168.1.2; our IP address is 192.168.1.160
Filename 'tmp/cubie-yJnMtq/sun4i-a10-cubieboard.dtb'.
Load address: 0x41000000
Loading: *##
     2.1 MiB/s
done
Bytes transferred = 15180 (3b4c hex)
sun4i# printenv bootargs
printenv bootargs
bootargs=console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.160:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none
sun4i# bootz 0x40008000 0x42000000 0x41000000
bootz 0x40008000 0x42000000 0x41000000
Kernel image @ 0x40008000 [ 0x000000 - 0x1b7ae0 ]
## Loading init Ramdisk from Legacy Image at 42000000 ...
   Image Name:   
   Created:      2014-02-07  19:37:29 UTC
   Image Type:   ARM Linux RAMDisk Image (uncompressed)
   Data Size:    642538 Bytes = 627.5 KiB
   Load Address: 00000000
   Entry Point:  00000000
   Verifying Checksum ... OK
## Flattened Device Tree blob at 41000000
   Booting using the fdt blob at 0x41000000
   Loading Device Tree to 40ff9000, end 40fffb4b ... OK
Starting kernel ...
~$off
# PYBOOT: Exception: kernel: ERROR: did not start booting.
# PYBOOT: Time: 18.95 seconds.
# PYBOOT: Result: FAIL
multi_v7_defconfig
------------------
ste-snowball: FAIL: last 80 lines of boot log:
    ----------------------------------------------
U-Boot 2009.11 (sept. 19 2011 - 17:03:11)
CPU:	ST-Ericsson db8500 v2 (Dual ARM Cortex A9) 998.400 Mhz
I2C:   ready
DRAM:   1 GB
MMC: 	
MCDE:  startup failed
sec_bridge: ISSWAPI_FLUSH_BOOT_CODE: 2
EMMC: 0, MMC: 1
In:    serial
Out:   serial
Err:   serial
Net:   smc911x-0
Hit any key to stop autoboot:  1 
 0 
U8500 $ 
U8500 $ version
version
U-Boot 2009.11 (sept. 19 2011 - 17:03:11)
U8500 $ setenv ethaddr 6e:e6:84:36:8e:9e
setenv ethaddr 6e:e6:84:36:8e:9e
Can't overwrite "ethaddr"
U8500 $setenv bootargs console=ttyAMA2,115200n8 debug earlyprintk rw root=/dev/mmcblk0p3 rootwait rootfstype=ext4
 setenv bootargs console=ttyAMA2,115200n8 debug earlyprintk rw root=/dev/mmcblk0p3 rootwait rootfstype=ext4
U8500 $ setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none'
setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none'
U8500 $ if test -n ${initenv}; then run initenv; fi
if test -n ${initenv}; then run initenv; fi
U8500 $ if test -n ${preboot}; then run preboot; fi
if test -n ${preboot}; then run preboot; fi
U8500 $ setenv autoload no; setenv autoboot no
setenv autoload no; setenv autoboot no
U8500 $dhcp
 dhcp
smc911x: detected LAN9221 controller
smc911x: phy initialized
smc911x: MAC 6e:e6:84:36:8e:9e
BOOTP broadcast 1
DHCP client bound to address 192.168.1.159
U8500 $ setenv serverip 192.168.1.2
setenv serverip 192.168.1.2
U8500 $ if test -n ${netargs}; then run netargs; fi
if test -n ${netargs}; then run netargs; fi
U8500 $ tftp 0x00800000 192.168.1.2:tmp/snowball-4vt4aQ/tmpbBObQf-uImage
tftp 0x00800000 192.168.1.2:tmp/snowball-4vt4aQ/tmpbBObQf-uImage
smc911x: detected LAN9221 controller
smc911x: phy initialized
smc911x: MAC 6e:e6:84:36:8e:9e
Using smc911x-0 device
TFTP from server 192.168.1.2; our IP address is 192.168.1.159
Filename 'tmp/snowball-4vt4aQ/tmpbBObQf-uImage'.
Load address: 0x800000
Loading: *#################################################################
     #################################################################
     #################################################################
     #################################################################
     #######################################################
done
Bytes transferred = 4623033 (468ab9 hex)
U8500 $ printenv bootargs
printenv bootargs
bootargs=console=ttyAMA2,115200n8 debug earlyprintk rw root=/dev/mmcblk0p3 rootwait rootfstype=ext4 ip=192.168.1.159:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none
U8500 $ bootm 0x00800000  
bootm 0x00800000  
## Booting kernel from Legacy Image at 00800000 ...
   Image Name:   Linux
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    4622969 Bytes =  4.4 MB
   Load Address: 00008000
   Entry Point:  00008000
   Loading Kernel Image ... OK
OK
Starting kernel ...
~$off
# PYBOOT: Exception: kernel: ERROR: did not start booting.
# PYBOOT: Time: 30.61 seconds.
# PYBOOT: Result: FAIL
am335x-boneblack: FAIL: last 80 lines of boot log:
    --------------------------------------------------
GNU ld (GNU Binutils) 2.22
U-Boot#setenv bootargs console=ttyO0,115200n8 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4
 setenv bootargs console=ttyO0,115200n8 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4
U-Boot# setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none'
setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none'
U-Boot# if test -n ${initenv}; then run initenv; fi
if test -n ${initenv}; then run initenv; fi
U-Boot# if test -n ${preboot}; then run preboot; fi
if test -n ${preboot}; then run preboot; fi
U-Boot# setenv autoload no; setenv autoboot no
setenv autoload no; setenv autoboot no
U-Boot# dhcp
dhcp
cpsw Waiting for PHY auto negotiation to complete.. done
link up on port 0, speed 100, full duplex
BOOTP broadcast 1
DHCP client bound to address 192.168.1.150
U-Boot#setenv serverip 192.168.1.2
 setenv serverip 192.168.1.2
U-Boot# if test -n ${netargs}; then run netargs; fi
if test -n ${netargs}; then run netargs; fi
U-Boot# tftp 0x80200000 192.168.1.2:tmp/am335xboneb-_c862l/zImage
tftp 0x80200000 192.168.1.2:tmp/am335xboneb-_c862l/zImage
link up on port 0, speed 100, full duplex
Using cpsw device
TFTP from server 192.168.1.2; our IP address is 192.168.1.150
Filename 'tmp/am335xboneb-_c862l/zImage'.
Load address: 0x80200000
Loading: *#################################################################
     #################################################################
     #################################################################
     #################################################################
     #####################################################
     1.2 MiB/s
done
Bytes transferred = 4581720 (45e958 hex)
U-Boot# tftp 0x81000000 192.168.1.2:buildroot.cpio.gz.uboot
tftp 0x81000000 192.168.1.2:buildroot.cpio.gz.uboot
link up on port 0, speed 100, full duplex
Using cpsw device
TFTP from server 192.168.1.2; our IP address is 192.168.1.150
Filename 'buildroot.cpio.gz.uboot'.
Load address: 0x81000000
Loading: *############################################
     1.2 MiB/s
done
Bytes transferred = 642602 (9ce2a hex)
U-Boot# tftp 0x81f00000 192.168.1.2:tmp/am335xboneb-_c862l/am335x-boneblack.dtb
tftp 0x81f00000 192.168.1.2:tmp/am335xboneb-_c862l/am335x-boneblack.dtb
link up on port 0, speed 100, full duplex
Using cpsw device
TFTP from server 192.168.1.2; our IP address is 192.168.1.150
Filename 'tmp/am335xboneb-_c862l/am335x-boneblack.dtb'.
Load address: 0x81f00000
Loading: *###
     1 MiB/s
done
Bytes transferred = 29482 (732a hex)
U-Boot# printenv bootargs
printenv bootargs
bootargs=console=ttyO0,115200n8 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.150:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none
U-Boot# bootz 0x80200000 0x81000000 0x81f00000
bootz 0x80200000 0x81000000 0x81f00000
## Loading init Ramdisk from Legacy Image at 81000000 ...
   Image Name:   
   Image Type:   ARM Linux RAMDisk Image (uncompressed)
   Data Size:    642538 Bytes = 627.5 KiB
   Load Address: 00000000
   Entry Point:  00000000
## Flattened Device Tree blob at 81f00000
   Booting using the fdt blob at 0x81f00000
   Loading Ramdisk to 9f19a000, end 9f236dea ... OK
   Using Device Tree in place at 81f00000, end 81f0a329
Starting kernel ...
~$off
# PYBOOT: Exception: kernel: ERROR: did not start booting.
# PYBOOT: Time: 28.92 seconds.
# PYBOOT: Result: FAIL
omap3-beagle-xm: FAIL: last 80 lines of boot log:
    -------------------------------------------------
USB0:   USB EHCI 1.00
scanning bus 0 for devices... 3 USB Device(s) found
       scanning usb for storage devices... 0 Storage Device(s) found
       scanning usb for ethernet devices... 1 Ethernet Device(s) found
OMAP3 beagleboard.org # setenv autoload no; setenv autoboot no
setenv autoload no; setenv autoboot no
OMAP3 beagleboard.org # dhcp
dhcp
ERROR: Need valid 'usbnet_devaddr' to be set
at ether.c:2369/usb_eth_init()
Waiting for Ethernet connection... done.
BOOTP broadcast 1
BOOTP broadcast 2
DHCP client bound to address 192.168.1.190
OMAP3 beagleboard.org # setenv serverip 192.168.1.2
setenv serverip 192.168.1.2
OMAP3 beagleboard.org #if test -n ${netargs}; then run netargs; fi
 if test -n ${netargs}; then run netargs; fi
OMAP3 beagleboard.org # tftp 0x80200000 192.168.1.2:tmp/3730xm-JASVaz/zImage
tftp 0x80200000 192.168.1.2:tmp/3730xm-JASVaz/zImage
Waiting for Ethernet connection... done.
Using sms0 device
TFTP from server 192.168.1.2; our IP address is 192.168.1.190
Filename 'tmp/3730xm-JASVaz/zImage'.
Load address: 0x80200000
Loading: *EHCI timed out on TD - token=0x88008d80
T #################################################################
     #################################################################
     #################################################################
     #################################################################
     #####################################################
     429.7 KiB/s
done
Bytes transferred = 4581720 (45e958 hex)
OMAP3 beagleboard.org # tftp 0x81000000 192.168.1.2:buildroot.cpio.gz.uboot
tftp 0x81000000 192.168.1.2:buildroot.cpio.gz.uboot
Waiting for Ethernet connection... done.
Using sms0 device
TFTP from server 192.168.1.2; our IP address is 192.168.1.190
Filename 'buildroot.cpio.gz.uboot'.
Load address: 0x81000000
Loading: *EHCI timed out on TD - token=0x8008d80
T ############################################
     114.3 KiB/s
done
Bytes transferred = 642602 (9ce2a hex)
OMAP3 beagleboard.org # tftp 0x81f00000 192.168.1.2:tmp/3730xm-JASVaz/omap3-beagle-xm.dtb
tftp 0x81f00000 192.168.1.2:tmp/3730xm-JASVaz/omap3-beagle-xm.dtb
Waiting for Ethernet connection... done.
Using sms0 device
TFTP from server 192.168.1.2; our IP address is 192.168.1.190
Filename 'tmp/3730xm-JASVaz/omap3-beagle-xm.dtb'.
Load address: 0x81f00000
Loading: *EHCI timed out on TD - token=0x88008d80
T ####
     10.7 KiB/s
done
Bytes transferred = 58597 (e4e5 hex)
OMAP3 beagleboard.org #printenv bootargs
 printenv bootargs
bootargs=console=ttyO2,115200n8 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.190:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none
OMAP3 beagleboard.org # bootz 0x80200000 0x81000000 0x81f00000
bootz 0x80200000 0x81000000 0x81f00000
## Loading init Ramdisk from Legacy Image at 81000000 ...
   Image Name:   
   Image Type:   ARM Linux RAMDisk Image (uncompressed)
   Data Size:    642538 Bytes = 627.5 KiB
   Load Address: 00000000
   Entry Point:  00000000
## Flattened Device Tree blob at 81f00000
   Booting using the fdt blob at 0x81f00000
   Loading Ramdisk to 8ff63000, end 8ffffdea ... OK
   Loading Device Tree to 8ff51000, end 8ff624e4 ... OK
Starting kernel ...
~$off
# PYBOOT: Exception: kernel: ERROR: did not start booting.
# PYBOOT: Time: 52.35 seconds.
# PYBOOT: Result: FAIL
sun7i-a20-cubieboard2: FAIL: last 80 lines of boot log:
    -------------------------------------------------------
setenv ethaddr 22:71:81:DA:53:EA
sun7i# setenv bootargs console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4
setenv bootargs console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4
sun7i# setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none'
setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none'
sun7i# setenv initrd_high 0xffffffff
setenv initrd_high 0xffffffff
sun7i# if test -n ${initenv}; then run initenv; fi
if test -n ${initenv}; then run initenv; fi
sun7i#if test -n ${preboot}; then run preboot; fi
 if test -n ${preboot}; then run preboot; fi
sun7i# setenv autoload no; setenv autoboot no
setenv autoload no; setenv autoboot no
sun7i# dhcp
dhcp
ENET Speed is 100 Mbps - FULL duplex connection
BOOTP broadcast 1
DHCP client bound to address 192.168.1.153
sun7i# setenv serverip 192.168.1.2
setenv serverip 192.168.1.2
sun7i# if test -n ${netargs}; then run netargs; fi
if test -n ${netargs}; then run netargs; fi
sun7i# tftp 0x40008000 192.168.1.2:tmp/cubie2-OZOzXI/zImage
tftp 0x40008000 192.168.1.2:tmp/cubie2-OZOzXI/zImage
Using emac device
TFTP from server 192.168.1.2; our IP address is 192.168.1.153
Filename 'tmp/cubie2-OZOzXI/zImage'.
Load address: 0x40008000
Loading: *#################################################################
     #################################################################
     #################################################################
     #################################################################
     #####################################################
     2.7 MiB/s
done
Bytes transferred = 4581720 (45e958 hex)
sun7i# tftp 0x42000000 192.168.1.2:buildroot.cpio.gz.uboot
tftp 0x42000000 192.168.1.2:buildroot.cpio.gz.uboot
Using emac device
TFTP from server 192.168.1.2; our IP address is 192.168.1.153
Filename 'buildroot.cpio.gz.uboot'.
Load address: 0x42000000
Loading: *############################################
     2.7 MiB/s
done
Bytes transferred = 642602 (9ce2a hex)
sun7i# tftp 0x41000000 192.168.1.2:tmp/cubie2-OZOzXI/sun7i-a20-cubieboard2.dtb
tftp 0x41000000 192.168.1.2:tmp/cubie2-OZOzXI/sun7i-a20-cubieboard2.dtb
Using emac device
TFTP from server 192.168.1.2; our IP address is 192.168.1.153
Filename 'tmp/cubie2-OZOzXI/sun7i-a20-cubieboard2.dtb'.
Load address: 0x41000000
Loading: *##
     2.2 MiB/s
done
Bytes transferred = 18209 (4721 hex)
sun7i# printenv bootargs
printenv bootargs
bootargs=console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.153:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none
sun7i# bootz 0x40008000 0x42000000 0x41000000
bootz 0x40008000 0x42000000 0x41000000
Kernel image @ 0x40008000 [ 0x000000 - 0x45e958 ]
## Loading init Ramdisk from Legacy Image at 42000000 ...
   Image Name:   
   Created:      2014-02-07  19:37:29 UTC
   Image Type:   ARM Linux RAMDisk Image (uncompressed)
   Data Size:    642538 Bytes = 627.5 KiB
   Load Address: 00000000
   Entry Point:  00000000
   Verifying Checksum ... OK
## Flattened Device Tree blob at 41000000
   Booting using the fdt blob at 0x41000000
   Loading Device Tree to 40ff8000, end 40fff720 ... OK
Starting kernel ...
~$off
# PYBOOT: Exception: kernel: ERROR: did not start booting.
# PYBOOT: Time: 20.12 seconds.
# PYBOOT: Result: FAIL
omap4-panda: FAIL: last 80 lines of boot log:
    ---------------------------------------------
Panda # if test -n ${preboot}; then run preboot; fi
if test -n ${preboot}; then run preboot; fi
(Re)start USB...
USB0:   USB EHCI 1.00
scanning bus 0 for devices... 3 USB Device(s) found
       scanning usb for storage devices... 0 Storage Device(s) found
       scanning usb for ethernet devices... 1 Ethernet Device(s) found
Panda # setenv autoload no; setenv autoboot no
setenv autoload no; setenv autoboot no
Panda #dhcp
 dhcp
Waiting for Ethernet connection... done.
BOOTP broadcast 1
BOOTP broadcast 2
DHCP client bound to address 192.168.1.152
Panda # setenv serverip 192.168.1.2
setenv serverip 192.168.1.2
Panda # if test -n ${netargs}; then run netargs; fi
if test -n ${netargs}; then run netargs; fi
Panda # tftp 0x82000000 192.168.1.2:tmp/4430panda-9DEFmS/zImage
tftp 0x82000000 192.168.1.2:tmp/4430panda-9DEFmS/zImage
Waiting for Ethernet connection... done.
Using sms0 device
TFTP from server 192.168.1.2; our IP address is 192.168.1.152
Filename 'tmp/4430panda-9DEFmS/zImage'.
Load address: 0x82000000
Loading: *EHCI timed out on TD - token=0x88008d80
T #################################################################
     #################################################################
     #################################################################
     #################################################################
     #####################################################
     494.1 KiB/s
done
Bytes transferred = 4581720 (45e958 hex)
Panda # tftp 0x81000000 192.168.1.2:buildroot.cpio.gz.uboot
tftp 0x81000000 192.168.1.2:buildroot.cpio.gz.uboot
Waiting for Ethernet connection... done.
Using sms0 device
TFTP from server 192.168.1.2; our IP address is 192.168.1.152
Filename 'buildroot.cpio.gz.uboot'.
Load address: 0x81000000
Loading: *EHCI timed out on TD - token=0x88008d80
T ############################################
     85 KiB/s
done
Bytes transferred = 642602 (9ce2a hex)
Panda # tftp 0x81f00000 192.168.1.2:tmp/4430panda-9DEFmS/omap4-panda.dtb
tftp 0x81f00000 192.168.1.2:tmp/4430panda-9DEFmS/omap4-panda.dtb
Waiting for Ethernet connection... done.
Using sms0 device
TFTP from server 192.168.1.2; our IP address is 192.168.1.152
Filename 'tmp/4430panda-9DEFmS/omap4-panda.dtb'.
Load address: 0x81f00000
Loading: *EHCI timed out on TD - token=0x8008d80
T ####
     6.8 KiB/s
done
Bytes transferred = 51803 (ca5b hex)
Panda # printenv bootargs
printenv bootargs
bootargs=console=ttyO2,115200n8 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.152:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none
Panda # bootz 0x82000000 0x81000000 0x81f00000
bootz 0x82000000 0x81000000 0x81f00000
## Loading init Ramdisk from Legacy Image at 81000000 ...
   Image Name:   
   Image Type:   ARM Linux RAMDisk Image (uncompressed)
   Data Size:    642538 Bytes = 627.5 KiB
   Load Address: 00000000
   Entry Point:  00000000
## Flattened Device Tree blob at 81f00000
   Booting using the fdt blob at 0x81f00000
   Using Device Tree in place at 81f00000, end 81f0fa5a
Starting kernel ...
~$off
# PYBOOT: Exception: kernel: ERROR: did not start booting.
# PYBOOT: Time: 58.73 seconds.
# PYBOOT: Result: FAIL
sun4i-a10-cubieboard: FAIL: last 80 lines of boot log:
    ------------------------------------------------------
setenv ethaddr 2e:40:70:f0:12:08
sun4i# setenv bootargs console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4
setenv bootargs console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4
sun4i# setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none'
setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none'
sun4i# setenv initrd_high 0xffffffff
setenv initrd_high 0xffffffff
sun4i# if test -n ${initenv}; then run initenv; fi
if test -n ${initenv}; then run initenv; fi
sun4i# if test -n ${preboot}; then run preboot; fi
if test -n ${preboot}; then run preboot; fi
sun4i# setenv autoload no; setenv autoboot no
setenv autoload no; setenv autoboot no
sun4i# dhcp
dhcp
ENET Speed is 100 Mbps - FULL duplex connection
BOOTP broadcast 1
DHCP client bound to address 192.168.1.193
sun4i# setenv serverip 192.168.1.2
setenv serverip 192.168.1.2
sun4i# if test -n ${netargs}; then run netargs; fi
if test -n ${netargs}; then run netargs; fi
sun4i# tftp 0x40008000 192.168.1.2:tmp/cubie-E9CfVW/zImage
tftp 0x40008000 192.168.1.2:tmp/cubie-E9CfVW/zImage
Using emac device
TFTP from server 192.168.1.2; our IP address is 192.168.1.193
Filename 'tmp/cubie-E9CfVW/zImage'.
Load address: 0x40008000
Loading: *#################################################################
     #################################################################
     #################################################################
     #################################################################
     #####################################################
     2.7 MiB/s
done
Bytes transferred = 4581720 (45e958 hex)
sun4i# tftp 0x42000000 192.168.1.2:buildroot.cpio.gz.uboot
tftp 0x42000000 192.168.1.2:buildroot.cpio.gz.uboot
Using emac device
TFTP from server 192.168.1.2; our IP address is 192.168.1.193
Filename 'buildroot.cpio.gz.uboot'.
Load address: 0x42000000
Loading: *############################################
     2.7 MiB/s
done
Bytes transferred = 642602 (9ce2a hex)
sun4i# tftp 0x41000000 192.168.1.2:tmp/cubie-E9CfVW/sun4i-a10-cubieboard.dtb
tftp 0x41000000 192.168.1.2:tmp/cubie-E9CfVW/sun4i-a10-cubieboard.dtb
Using emac device
TFTP from server 192.168.1.2; our IP address is 192.168.1.193
Filename 'tmp/cubie-E9CfVW/sun4i-a10-cubieboard.dtb'.
Load address: 0x41000000
Loading: *##
     2.4 MiB/s
done
Bytes transferred = 15180 (3b4c hex)
sun4i# printenv bootargs
printenv bootargs
bootargs=console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.193:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none
sun4i# bootz 0x40008000 0x42000000 0x41000000
bootz 0x40008000 0x42000000 0x41000000
Kernel image @ 0x40008000 [ 0x000000 - 0x45e958 ]
## Loading init Ramdisk from Legacy Image at 42000000 ...
   Image Name:   
   Created:      2014-02-07  19:37:29 UTC
   Image Type:   ARM Linux RAMDisk Image (uncompressed)
   Data Size:    642538 Bytes = 627.5 KiB
   Load Address: 00000000
   Entry Point:  00000000
   Verifying Checksum ... OK
## Flattened Device Tree blob at 41000000
   Booting using the fdt blob at 0x41000000
   Loading Device Tree to 40ff9000, end 40fffb4b ... OK
Starting kernel ...
~$off
# PYBOOT: Exception: kernel: ERROR: did not start booting.
# PYBOOT: Time: 20.01 seconds.
# PYBOOT: Result: FAIL
bcm28155-ap: FAIL: last 80 lines of boot log:
    ---------------------------------------------
[    1.060000] ---[ end trace 77aff4427192b898 ]---
[    1.060000] Alignment trap: not handling instruction e1923f9f at [<c07ba47c>]
[    1.060000] Unhandled fault: alignment exception (0x001) at 0x20736eae
<LAVA_DISPATCHER>2014-03-18 10:15:56 AM WARNING: Sending newline in case of corruption.
<LAVA_DISPATCHER>2014-03-18 10:16:26 AM WARNING: Sending newline in case of corruption.
<LAVA_DISPATCHER>2014-03-18 10:16:56 AM WARNING: Sending newline in case of corruption.
<LAVA_DISPATCHER>2014-03-18 10:17:26 AM WARNING: Sending newline in case of corruption.
<LAVA_DISPATCHER>2014-03-18 10:17:56 AM WARNING: Sending newline in case of corruption.
<LAVA_DISPATCHER>2014-03-18 10:18:27 AM WARNING: Sending newline in case of corruption.
<LAVA_DISPATCHER>2014-03-18 10:18:57 AM INFO: Boot linaro image failed: Timeout exceeded in read_nonblocking().
<lava_dispatcher.utils.logging_spawn object at 0xac7702c>
version: 2.4 ($Revision: 516 $)
command: /usr/bin/conmux-console
args: [u'/usr/bin/conmux-console', u'vence/capri']
searcher: searcher_re:
    0: re.compile("root@bcm-capri-board:~#")
buffer (last 100 chars): 23f9f at [<c07ba47c>]
[    1.060000] Unhandled fault: alignment exception (0x001) at 0x20736eae
before (last 100 chars): 23f9f at [<c07ba47c>]
[    1.060000] Unhandled fault: alignment exception (0x001) at 0x20736eae
after: <class 'pexpect.TIMEOUT'>
match: None
match_index: None
exitstatus: None
flag_eof: False
pid: 7812
child_fd: 3
closed: False
timeout: 1200
delimiter: <class 'pexpect.EOF'>
logfile: None
logfile_read: <lava_dispatcher.context.Flusher object at 0xa5a360c>
logfile_send: None
maxread: 2000
ignorecase: False
searchwindowsize: None
delaybeforesend: 0.05
delayafterclose: 0.1
delayafterterminate: 0.1
<LAVA_DISPATCHER>2014-03-18 10:18:57 AM INFO: Booting the test image. Attempt: 2
< waiting for device >
<LAVA_DISPATCHER>2014-03-18 10:18:59 AM INFO: Perform hard reset on the system
Reboot: capri ; ip9258 1 3 :  off, sleep, on
< waiting for device >
<LAVA_DISPATCHER>2014-03-18 10:29:01 AM ERROR: boot_linaro_image failed
Traceback (most recent call last):
  File "/home/khilman/work.local/lava/lava-dispatcher/lava_dispatcher/actions/boot_control.py", line 105, in run
    client.boot_linaro_image()
  File "/home/khilman/work.local/lava/lava-dispatcher/lava_dispatcher/client/base.py", line 508, in boot_linaro_image
    self._boot_linaro_image()
  File "/home/khilman/work.local/lava/lava-dispatcher/lava_dispatcher/client/base.py", line 481, in _boot_linaro_image
    self.proc = self.target_device.power_on()
  File "/home/khilman/work.local/lava/lava-dispatcher/lava_dispatcher/device/capri.py", line 114, in power_on
    self.fastboot('reboot')
  File "/home/khilman/work.local/lava/lava-dispatcher/lava_dispatcher/device/fastboot.py", line 57, in __call__
    _call(self.context, command, ignore_failure, timeout)
  File "/home/khilman/work.local/lava/lava-dispatcher/lava_dispatcher/device/fastboot.py", line 45, in _call
    context.run_command(cmd, failok=ignore_failure)
  File "/home/khilman/work.local/lava/lava-dispatcher/lava_dispatcher/context.py", line 153, in run_command
    rc = subprocess.check_call(command, **output_args)
  File "/usr/lib/python2.7/subprocess.py", line 511, in check_call
    raise CalledProcessError(retcode, cmd)
CalledProcessError: Command '['nice', 'sh', '-c', u'timeout 600s flock /var/lock/lava-fastboot.lck fastboot -s 1234567890 reboot']' returned non-zero exit status 124
<LAVA_DISPATCHER>2014-03-18 10:29:01 AM INFO: CriticalError
<LAVA_DISPATCHER>2014-03-18 10:29:01 AM WARNING: [ACTION-E] boot_linaro_image is finished with error (Failed to boot test image.).
ErrorMessage: Failed to boot test image.
Lava failed at action boot_linaro_image with error:Failed to boot test image.
Traceback (most recent call last):
  File "/home/khilman/work.local/lava/lava-dispatcher/lava_dispatcher/job.py", line 270, in run
    action.run(**params)
  File "/home/khilman/work.local/lava/lava-dispatcher/lava_dispatcher/actions/boot_control.py", line 109, in run
    raise CriticalError("Failed to boot test image.")
CriticalError: Failed to boot test image.
Reboot: capri ; ip9258 1 3 :  ['off']
<LAVA_DISPATCHER>2014-03-18 10:29:02 AM INFO: Submitting the test result with parameters = {u'token': '<HIDDEN>', u'stream': u'/anonymous/lboot/', u'server': u'http://khilman@lava.lan/RPC2/%27%7D
<LAVA_DISPATCHER>2014-03-18 10:29:02 AM INFO: Dashboard : http://lava.lan/dashboard/permalink/bundle/f6f3b96ffe5242f6dac3b5a80eef2165f...
LBOOT: Result: FAIL
LBOOT: Time: 978.40 seconds.
omap3-overo-tobi: FAIL: last 80 lines of boot log:
    --------------------------------------------------
Overo #if test -n ${preboot}; then run preboot; fi
 if test -n ${preboot}; then run preboot; fi
Overo # setenv autoload no; setenv autoboot no
setenv autoload no; setenv autoboot no
Overo # dhcp
dhcp
smc911x: detected LAN9221 controller
smc911x: phy initialized
smc911x: MAC fe:06:88:cd:08:6f
BOOTP broadcast 1
DHCP client bound to address 192.168.1.155
Overo # setenv serverip 192.168.1.2
setenv serverip 192.168.1.2
Overo # if test -n ${netargs}; then run netargs; fi
if test -n ${netargs}; then run netargs; fi
Overo # tftp 0x80200000 192.168.1.2:tmp/3530overo-bJRySI/zImage
tftp 0x80200000 192.168.1.2:tmp/3530overo-bJRySI/zImage
smc911x: detected LAN9221 controller
smc911x: phy initialized
smc911x: MAC fe:06:88:cd:08:6f
Using smc911x-0 device
TFTP from server 192.168.1.2; our IP address is 192.168.1.155
Filename 'tmp/3530overo-bJRySI/zImage'.
Load address: 0x80200000
Loading: *#################################################################
     #################################################################
     #################################################################
     #################################################################
     #####################################################
     2.4 MiB/s
done
Bytes transferred = 4581720 (45e958 hex)
Overo # tftp 0x81000000 192.168.1.2:buildroot.cpio.gz.uboot
tftp 0x81000000 192.168.1.2:buildroot.cpio.gz.uboot
smc911x: detected LAN9221 controller
smc911x: phy initialized
smc911x: MAC fe:06:88:cd:08:6f
Using smc911x-0 device
TFTP from server 192.168.1.2; our IP address is 192.168.1.155
Filename 'buildroot.cpio.gz.uboot'.
Load address: 0x81000000
Loading: *############################################
     2.4 MiB/s
done
Bytes transferred = 642602 (9ce2a hex)
Overo # tftp 0x81f00000 192.168.1.2:tmp/3530overo-bJRySI/omap3-overo-tobi.dtb
tftp 0x81f00000 192.168.1.2:tmp/3530overo-bJRySI/omap3-overo-tobi.dtb
smc911x: detected LAN9221 controller
smc911x: phy initialized
smc911x: MAC fe:06:88:cd:08:6f
Using smc911x-0 device
TFTP from server 192.168.1.2; our IP address is 192.168.1.155
Filename 'tmp/3530overo-bJRySI/omap3-overo-tobi.dtb'.
Load address: 0x81f00000
Loading: *#####
     2.3 MiB/s
done
Bytes transferred = 61262 (ef4e hex)
Overo #printenv bootargs
 printenv bootargs
bootargs=console=ttyO2,115200n8 earlyprintk debug rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.155:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none
Overo # bootz 0x80200000 0x81000000 0x81f00000
bootz 0x80200000 0x81000000 0x81f00000
## Loading init Ramdisk from Legacy Image at 81000000 ...
   Image Name:   
   Image Type:   ARM Linux RAMDisk Image (uncompressed)
   Data Size:    642538 Bytes = 627.5 KiB
   Load Address: 00000000
   Entry Point:  00000000
## Flattened Device Tree blob at 81f00000
   Booting using the fdt blob at 0x81f00000
   Loading Ramdisk to 8ff63000, end 8ffffdea ... OK
   Loading Device Tree to 8ff51000, end 8ff62f4d ... OK
Starting kernel ...
~$off
# PYBOOT: Exception: kernel: ERROR: did not start booting.
# PYBOOT: Time: 28.25 seconds.
# PYBOOT: Result: FAIL
am335x-bone: FAIL: last 80 lines of boot log:
    ---------------------------------------------
GNU ld (GNU Binutils for Ubuntu) 2.22.90.20120919
U-Boot# setenv bootargs console=ttyO0,115200n8 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none'
U-Boot# setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none'if test -n ${initenv}; then run initenv; fi
U-Boot# if test -n ${initenv}; then run initenv; fiif test -n ${preboot}; then run preboot; fi
U-Boot# if test -n ${preboot}; then run preboot; fisetenv autoload no; setenv autoboot no
U-Boot# setenv autoload no; setenv autoboot nodhcp
U-Boot# dhcp
cpsw Waiting for PHY auto negotiation to complete.. done
link up on port 0, speed 100, full duplex
BOOTP broadcast 1
BOOTP broadcast 2
DHCP client bound to address 192.168.1.198
U-Boot# setenv serverip 192.168.1.2
setenv serverip 192.168.1.2
U-Boot# if test -n ${netargs}; then run netargs; fi
if test -n ${netargs}; then run netargs; fi
U-Boot# tftp 0x80200000 192.168.1.2:tmp/am335xbone-SQruA0/zImage
tftp 0x80200000 192.168.1.2:tmp/am335xbone-SQruA0/zImage
link up on port 0, speed 100, full duplex
Using cpsw device
TFTP from server 192.168.1.2; our IP address is 192.168.1.198
Filename 'tmp/am335xbone-SQruA0/zImage'.
Load address: 0x80200000
Loading: *#################################################################
     #################################################################
     #################################################################
     #################################################################
     #####################################################
     1.2 MiB/s
done
Bytes transferred = 4581720 (45e958 hex)
U-Boot# tftp 0x81000000 192.168.1.2:buildroot.cpio.gz.uboot
tftp 0x81000000 192.168.1.2:buildroot.cpio.gz.uboot
link up on port 0, speed 100, full duplex
Using cpsw device
TFTP from server 192.168.1.2; our IP address is 192.168.1.198
Filename 'buildroot.cpio.gz.uboot'.
Load address: 0x81000000
Loading: *############################################
     1.1 MiB/s
done
Bytes transferred = 642602 (9ce2a hex)
U-Boot# tftp 0x81f00000 192.168.1.2:tmp/am335xbone-SQruA0/am335x-bone.dtb
tftp 0x81f00000 192.168.1.2:tmp/am335xbone-SQruA0/am335x-bone.dtb
link up on port 0, speed 100, full duplex
Using cpsw device
TFTP from server 192.168.1.2; our IP address is 192.168.1.198
Filename 'tmp/am335xbone-SQruA0/am335x-bone.dtb'.
Load address: 0x81f00000
Loading: *##
     1.1 MiB/s
done
Bytes transferred = 28886 (70d6 hex)
U-Boot# printenv bootargs
printenv bootargs
bootargs=console=ttyO0,115200n8 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.198:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none
U-Boot# bootz 0x80200000 0x81000000 0x81f00000
bootz 0x80200000 0x81000000 0x81f00000
## Loading init Ramdisk from Legacy Image at 81000000 ...
   Image Name:   
   Image Type:   ARM Linux RAMDisk Image (uncompressed)
   Data Size:    642538 Bytes = 627.5 KiB
   Load Address: 00000000
   Entry Point:  00000000
## Flattened Device Tree blob at 81f00000
   Booting using the fdt blob at 0x81f00000
   Loading Ramdisk to 8f19a000, end 8f236dea ... OK
   Using Device Tree in place at 81f00000, end 81f0a0d5
Starting kernel ...
~$off
# PYBOOT: Exception: kernel: ERROR: did not start booting.
# PYBOOT: Time: 30.64 seconds.
# PYBOOT: Result: FAIL
omap3-overo-storm-tobi: FAIL: last 80 lines of boot log:
    --------------------------------------------------------
No EEPROM on expansion board
Die ID #3dea00029ff80000016830c40802e016
Net:   smc911x-0
Warning: smc911x-0 using MAC address from net device
Hit any key to stop autoboot:  5 
 0 
Overo # 
Overo # version
version
U-Boot 2013.04-00003-g84ebf5d (Jun 21 2013 - 15:36:05)
arm-linux-gnueabi-gcc (Ubuntu/Linaro 4.7.2-1ubuntu1) 4.7.2
GNU ld (GNU Binutils for Ubuntu) 2.22.90.20120919
Overo # setenv bootargs console=ttyO2,115200n8 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4
setenv bootargs console=ttyO2,115200n8 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4
Overo # setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none'
setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none'
Overo # if test -n ${initenv}; then run initenv; fi
if test -n ${initenv}; then run initenv; fi
Overo # if test -n ${preboot}; then run preboot; fi
if test -n ${preboot}; then run preboot; fi
Overo # setenv autoload no; setenv autoboot no
setenv autoload no; setenv autoboot no
Overo # dhcp
dhcp
smc911x: detected LAN9221 controller
smc911x: phy initialized
smc911x: MAC 00:15:c9:28:f0:11
BOOTP broadcast 1
DHCP client bound to address 192.168.1.195
Overo # setenv serverip 192.168.1.2
setenv serverip 192.168.1.2
Overo # if test -n ${netargs}; then run netargs; fi
if test -n ${netargs}; then run netargs; fi
Overo # tftp 0x80200000 192.168.1.2:tmp/3730storm-H8BOVO/zImage
tftp 0x80200000 192.168.1.2:tmp/3730storm-H8BOVO/zImage
smc911x: detected LAN9221 controller
smc911x: phy initialized
smc911x: MAC 00:15:c9:28:f0:11
Using smc911x-0 device
TFTP from server 192.168.1.2; our IP address is 192.168.1.195
Filename 'tmp/3730storm-H8BOVO/zImage'.
Load address: 0x80200000
Loading: *#################################################################
     #################################################################
     #################################################################
     #################################################################
     #####################################################
     2.4 MiB/s
done
Bytes transferred = 4581720 (45e958 hex)
Overo # tftp 0x81f00000 192.168.1.2:tmp/3730storm-H8BOVO/omap3-overo-storm-tobi.dtb
tftp 0x81f00000 192.168.1.2:tmp/3730storm-H8BOVO/omap3-overo-storm-tobi.dtb
smc911x: detected LAN9221 controller
smc911x: phy initialized
smc911x: MAC 00:15:c9:28:f0:11
Using smc911x-0 device
TFTP from server 192.168.1.2; our IP address is 192.168.1.195
Filename 'tmp/3730storm-H8BOVO/omap3-overo-storm-tobi.dtb'.
Load address: 0x81f00000
Loading: *#####
     2.4 MiB/s
done
Bytes transferred = 62106 (f29a hex)
Overo # printenv bootargs
printenv bootargs
bootargs=console=ttyO2,115200n8 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.195:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none
Overo #bootz 0x80200000 - 0x81f00000
 bootz 0x80200000 - 0x81f00000
## Flattened Device Tree blob at 81f00000
   Booting using the fdt blob at 0x81f00000
   Loading Device Tree to 8ffed000, end 8ffff299 ... OK
Starting kernel ...
~$off
# PYBOOT: Exception: kernel: ERROR: did not start booting.
# PYBOOT: Time: 26.33 seconds.
# PYBOOT: Result: FAIL
omap5-uevm: FAIL: last 80 lines of boot log:
    --------------------------------------------
(Re)start USB...
USB0:   USB EHCI 1.00
scanning bus 0 for devices... found: 002/075 2
3 USB Device(s) found
       scanning usb for storage devices... 0 Storage Device(s) found
       scanning usb for ethernet devices... 1 Ethernet Device(s) found
U-Boot# setenv autoload no; setenv autoboot no
setenv autoload no; setenv autoboot no
U-Boot# dhcp
dhcp
Waiting for Ethernet connection... done.
BOOTP broadcast 1
BOOTP broadcast 2
DHCP client bound to address 192.168.1.249
U-Boot# setenv serverip 192.168.1.2
setenv serverip 192.168.1.2
U-Boot# if test -n ${netargs}; then run netargs; fi
if test -n ${netargs}; then run netargs; fi
U-Boot# tftp 0x82000000 192.168.1.2:tmp/omap5uevm-21kOs9/zImage
tftp 0x82000000 192.168.1.2:tmp/omap5uevm-21kOs9/zImage
Waiting for Ethernet connection... done.
Using sms0 device
TFTP from server 192.168.1.2; our IP address is 192.168.1.249
Filename 'tmp/omap5uevm-21kOs9/zImage'.
Load address: 0x82000000
Loading: *EHCI timed out on TD - token=0x8008d80
T #################################################################
     #################################################################
     #################################################################
     #################################################################
     #####################################################
     443.4 KiB/s
done
Bytes transferred = 4581720 (45e958 hex)
U-Boot# tftp 0x81000000 192.168.1.2:buildroot.cpio.gz.uboot
tftp 0x81000000 192.168.1.2:buildroot.cpio.gz.uboot
Waiting for Ethernet connection... done.
Using sms0 device
TFTP from server 192.168.1.2; our IP address is 192.168.1.249
Filename 'buildroot.cpio.gz.uboot'.
Load address: 0x81000000
Loading: *T ############################################
     82 KiB/s
done
Bytes transferred = 642602 (9ce2a hex)
U-Boot# tftp 0x80f80000 192.168.1.2:tmp/omap5uevm-21kOs9/omap5-uevm.dtb
tftp 0x80f80000 192.168.1.2:tmp/omap5uevm-21kOs9/omap5-uevm.dtb
Waiting for Ethernet connection... done.
Using sms0 device
TFTP from server 192.168.1.2; our IP address is 192.168.1.249
Filename 'tmp/omap5uevm-21kOs9/omap5-uevm.dtb'.
Load address: 0x80f80000
Loading: *EHCI timed out on TD - token=0x88008d80
T ####
     4.9 KiB/s
done
Bytes transferred = 44884 (af54 hex)
U-Boot# printenv bootargs
printenv bootargs
bootargs=console=ttyO2,115200n8 debug earlyprintk ip=192.168.1.249:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none
U-Boot#bootz 0x82000000 0x81000000 0x80f80000
 bootz 0x82000000 0x81000000 0x80f80000
Kernel image @ 0x82000000 [ 0x000000 - 0x45e958 ]
## Loading init Ramdisk from Legacy Image at 81000000 ...
   Image Name:   
   Image Type:   ARM Linux RAMDisk Image (uncompressed)
   Data Size:    642538 Bytes = 627.5 KiB
   Load Address: 00000000
   Entry Point:  00000000
   Verifying Checksum ... OK
## Flattened Device Tree blob at 80f80000
   Booting using the fdt blob at 0x80f80000
   Using Device Tree in place at 80f80000, end 80f8df53
Starting kernel ...
~$off
# PYBOOT: Exception: kernel: ERROR: did not start booting.
# PYBOOT: Time: 60.19 seconds.
# PYBOOT: Result: FAIL
omap4-panda-es: FAIL: last 80 lines of boot log:
    ------------------------------------------------
if test -n ${initenv}; then run initenv; fi
Panda # if test -n ${preboot}; then run preboot; fi
if test -n ${preboot}; then run preboot; fi
(Re)start USB...
USB0:   USB EHCI 1.00
scanning bus 0 for devices... 3 USB Device(s) found
       scanning usb for storage devices... 0 Storage Device(s) found
       scanning usb for ethernet devices... 1 Ethernet Device(s) found
Panda # setenv autoload no; setenv autoboot no
setenv autoload no; setenv autoboot no
Panda # dhcp
dhcp
Waiting for Ethernet connection... done.
BOOTP broadcast 1
BOOTP broadcast 2
DHCP client bound to address 192.168.1.157
Panda # setenv serverip 192.168.1.2
setenv serverip 192.168.1.2
Panda # if test -n ${netargs}; then run netargs; fi
if test -n ${netargs}; then run netargs; fi
Panda # tftp 0x82000000 192.168.1.2:tmp/4460panda-es-VKfF_Z/zImage
tftp 0x82000000 192.168.1.2:tmp/4460panda-es-VKfF_Z/zImage
Waiting for Ethernet connection... done.
Using sms0 device
TFTP from server 192.168.1.2; our IP address is 192.168.1.157
Filename 'tmp/4460panda-es-VKfF_Z/zImage'.
Load address: 0x82000000
Loading: *EHCI timed out on TD - token=0x88008d80
T #################################################################
     #################################################################
     #################################################################
     #################################################################
     #####################################################
     496.1 KiB/s
done
Bytes transferred = 4581720 (45e958 hex)
Panda # tftp 0x81000000 192.168.1.2:buildroot.cpio.gz.uboot
tftp 0x81000000 192.168.1.2:buildroot.cpio.gz.uboot
Waiting for Ethernet connection... done.
Using sms0 device
TFTP from server 192.168.1.2; our IP address is 192.168.1.157
Filename 'buildroot.cpio.gz.uboot'.
Load address: 0x81000000
Loading: *T ############################################
     83 KiB/s
done
Bytes transferred = 642602 (9ce2a hex)
Panda # tftp 0x81f00000 192.168.1.2:tmp/4460panda-es-VKfF_Z/omap4-panda-es.dtb
tftp 0x81f00000 192.168.1.2:tmp/4460panda-es-VKfF_Z/omap4-panda-es.dtb
Waiting for Ethernet connection... done.
Using sms0 device
TFTP from server 192.168.1.2; our IP address is 192.168.1.157
Filename 'tmp/4460panda-es-VKfF_Z/omap4-panda-es.dtb'.
Load address: 0x81f00000
Loading: *EHCI timed out on TD - token=0x8008d80
T ####
     9.8 KiB/s
done
Bytes transferred = 52383 (cc9f hex)
Panda #printenv bootargs
 printenv bootargs
bootargs=console=ttyO2,115200n8 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.157:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none
Panda # bootz 0x82000000 0x81000000 0x81f00000
bootz 0x82000000 0x81000000 0x81f00000
## Loading init Ramdisk from Legacy Image at 81000000 ...
   Image Name:   
   Image Type:   ARM Linux RAMDisk Image (uncompressed)
   Data Size:    642538 Bytes = 627.5 KiB
   Load Address: 00000000
   Entry Point:  00000000
## Flattened Device Tree blob at 81f00000
   Booting using the fdt blob at 0x81f00000
   Using Device Tree in place at 81f00000, end 81f0fc9e
Starting kernel ...
~$off
# PYBOOT: Exception: kernel: ERROR: did not start booting.
# PYBOOT: Time: 57.10 seconds.
# PYBOOT: Result: FAIL

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

next boot: 20 pass, 24 fail (next-20140318)