Failed boards:
bbb omap2plus_defconfig : FAILED 1:15.37 bbb multi_v7_defconfig : FAILED 1:10.02 beaver multi_v7_defconfig : FAILED 2:59.30 capri multi_v7_defconfig : FAILED 2:57.05 cubie sunxi_defconfig : FAILED 1:02.92 cubie multi_v7_defconfig : FAILED 1:00.64 cubie2 sunxi_defconfig : FAILED 1:00.79 cubie2 multi_v7_defconfig : FAILED 1:02.74 cubie2 multi_lpae_defconfig : FAILED 0:58.76 cubox dove_defconfig : BUILD FAILED dalmore tegra_defconfig : FAILED 1:31.50 dalmore multi_v7_defconfig : FAILED 1:04.27 dalmore multi_lpae_defconfig : FAILED 1:04.81 hummingboard multi_v7_defconfig : FAILED 2:55.79 omap5uevm omap2plus_defconfig : FAILED 1:32.15 omap5uevm multi_v7_defconfig : FAILED 1:14.43 omap5uevm multi_lpae_defconfig : FAILED 1:10.99 panda omap2plus_defconfig : FAILED 1:13.63 panda multi_v7_defconfig : FAILED 1:14.09 seaboard multi_v7_defconfig : FAILED 3:08.88 snowball multi_v7_defconfig : FAILED 1:15.20 trimslice multi_v7_defconfig : FAILED 3:06.37 wandboard multi_v7_defconfig : FAILED 3:06.98
Successful boards:
apc vt8500_v6_v7_defconfig : passed 1:16.87 arndale exynos_defconfig : passed 1:12.78 beaver tegra_defconfig : warnings 0:56.90 capri bcm_defconfig : passed 0:42.56 hummingboard imx_v6_v7_defconfig : warnings 1:27.12 sama5 sama5_defconfig : passed 1:49.69 seaboard tegra_defconfig : warnings 1:11.04 snow exynos_defconfig : passed 1:33.87 snowball u8500_defconfig : passed 1:38.73 trimslice tegra_defconfig : warnings 1:04.89 wandboard imx_v6_v7_defconfig : warnings 1:02.07
Offline boards:
Board legend is available at http://arm-soc.lixom.net/boards.html
Last entries of failed logs below:
========================================================================
Board bbb-multi_v7_defconfig failure log: -------------------------------------------------
TFTP from server 172.16.1.3; our IP address is 172.16.1.110 Filename 'next/next-20140319/multi_v7_defconfig/zImage'. Load address: 0x80200000 Loading: *################################################################# ################################node: bbb status: on ################################# ################################################################# ################################################################# ##################################################### 1.2 MiB/s done Bytes transferred = 4580256 (45e3a0 hex) U-Boot# setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 U-Boot# tftp 0x81f00000 next/next-20140319/multi_v7_defconfig/dtbs/am335x-boneblack.dtb tftp 0x81f00000 next/next-20140319/multi_v7_defconfig/dtbs/am335x-boneblack.dtb link up on port 0, speed 100, full duplex Using cpsw device TFTP from server 172.16.1.3; our IP address is 172.16.1.110 Filename 'next/next-20140319/multi_v7_defconfig/dtbs/am335x-boneblack.dtb'. Load address: 0x81f00000 Loading: *### 668.9 KiB/s done Bytes transferred = 29482 (732a hex) U-Boot# setenv bootargs console=ttyO0,115200 root=/dev/mmcblk0p2 rootwait rw debug earlyprintk setenv bootargs console=ttyO0,115200 root=/dev/mmcblk0p2 rootwait rw debug earlyprintk U-Boot# printenv bootargs printenv bootargs bootargs=console=ttyO0,115200 root=/dev/mmcblk0p2 rootwait rw debug earlyprintk U-Boot# bootz 0x80200000 - 0x81f00000 bootz 0x80200000 - 0x81f00000 ## Flattened Device Tree blob at 81f00000 Booting using the fdt blob at 0x81f00000 Using Device Tree in place at 81f00000, end 81f0a329
Starting kernel ...
~$off # PYBOOT: Exception: timeout
========================================================================
Board bbb-omap2plus_defconfig failure log: -------------------------------------------------
Using cpsw device TFTP from server 172.16.1.3; our IP address is 172.16.1.110 Filename 'next/next-20140319/omap2plus_defconfig/zImage'. Load address: 0x80200000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################## 1.2 MiB/s done Bytes transferred = 4306968 (41b818 hex) U-Boot# setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 U-Boot# tftp 0x81f00000 next/next-20140319/omap2plus_defconfig/dtbs/am335x-boneblack.dtb tftp 0x81f00000 next/next-20140319/omap2plus_defconfig/dtbs/am335x-boneblack.dtb link up on port 0, speed 100, full duplex Using cpsw device TFTP from server 172.16.1.3; our IP address is 172.16.1.110 Filename 'next/next-20140319/omap2plus_defconfig/dtbs/am335x-boneblack.dtb'. Load address: 0x81f00000 Loading: *### 1.1 MiB/s done Bytes transferred = 29482 (732a hex) U-Boot# setenv bootargs console=ttyO0,115200 root=/dev/mmcblk0p2 rootwait rw debug earlyprintk setenv bootargs console=ttyO0,115200 root=/dev/mmcblk0p2 rootwait rw debug earlyprintk U-Boot# printenv bootargs printenv bootargs bootargs=console=ttyO0,115200 root=/dev/mmcblk0p2 rootwait rw debug earlyprintk U-Boot# bootz 0x80200000 - 0x81f00000 bootz 0x80200000 - 0x81f00000 ## Flattened Device Tree blob at 81f00000 Booting using the fdt blob at 0x81f00000 Using Device Tree in place at 81f00000, end 81f0a329
Starting kernel ...
~$off # PYBOOT: Exception: timeout
========================================================================
Board beaver-multi_v7_defconfig failure log: -------------------------------------------------
[ 5.298627] [<c050e548>] (bus_for_each_drv) from [<c050fd3c>] (device_attach+0x74/0x88) [ 5.306631] [<c050fd3c>] (device_attach) from [<c050f3e4>] (bus_probe_device+0x84/0xa8) [ 5.314634] [<c050f3e4>] (bus_probe_device) from [<c050f820>] (deferred_probe_work_func+0x68/0x98) [ 5.323592] [<c050f820>] (deferred_probe_work_func) from [<c025a1a4>] (process_one_work+0x10c/0x37c) [ 5.332710] [<c025a1a4>] (process_one_work) from [<c025aec4>] (worker_thread+0x13c/0x404) [ 5.340886] [<c025aec4>] (worker_thread) from [<c02605c4>] (kthread+0xd8/0xf0) [ 5.348107] [<c02605c4>] (kthread) from [<c020e638>] (ret_from_fork+0x14/0x3c) [ 5.355324] ---[ end trace ccae67a38264866c ]--- [ 5.359938] host1x drm: No connectors reported connected with modes [ 5.366208] [drm] Cannot find any crtc or sizes - going 1024x768 [ 5.385873] Console: switching to colour frame buffer device 128x48 [ 5.397609] host1x drm: fb0: frame buffer device [ 5.402300] host1x drm: registered panic notifier [ 5.407003] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 5.413218] platform 7d004000.usb: Driver tegra-ehci requests probe deferral [ 5.420592] platform 7d008000.usb: Driver tegra-ehci requests probe deferral [ 5.431937] tegra-ehci 7d004000.usb: EHCI Host Controller [ 5.437348] tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1 [ 5.445141] tegra-ehci 7d004000.usb: irq 53, io mem 0x7d004000 [ 5.463055] tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.00 [ 5.469424] hub 1-0:1.0: USB hub found [ 5.473203] hub 1-0:1.0: 1 port detected [ 5.477540] tegra-ehci 7d008000.usb: EHCI Host Controller [ 5.482935] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 5.490743] tegra-ehci 7d008000.usb: irq 129, io mem 0x7d008000 [ 5.513046] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.00 [ 5.519330] hub 2-0:1.0: USB hub found [ 5.523105] hub 2-0:1.0: 1 port detected [ 5.530997] tps65910-rtc tps65910-rtc: setting system clock to 2000-01-01 00:00:04 UTC (946684804) [ 5.543962] ALSA device list: [ 5.546929] #0: NVIDIA Tegra Beaver [ 5.553120] EXT4-fs (mmcblk0p1): couldn't mount as ext3 due to feature incompatibilities [ 5.562004] EXT4-fs (mmcblk0p1): couldn't mount as ext2 due to feature incompatibilities [ 5.579271] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 5.587382] VFS: Mounted root (ext4 filesystem) readonly on device 179:1. [ 5.599797] devtmpfs: mounted [ 5.603265] Freeing unused kernel memory: 544K (c0a4e000 - c0ad6000) [ 5.662951] Internal error: Oops - undefined instruction: 0 [#1] SMP ARM ~$off # PYBOOT: Exception: timeout
========================================================================
Board capri-multi_v7_defconfig failure log: -------------------------------------------------
[ 0.930000] mmcblk0boot1: unknown partition table [ 0.940000] mmcblk0boot0: unknown partition table [ 0.990000] EXT4-fs (mmcblk0p8): mounted filesystem with ordered data mode. Opts: (null) [ 1.000000] VFS: Mounted root (ext4 filesystem) readonly on device 179:8. [ 1.000000] devtmpfs: mounted [ 1.010000] Freeing unused kernel memory: 544K (c0a4e000 - c0ad6000) [ 1.030000] Internal error: Oops - undefined instruction: 0 [#1] SMP ARM [ 1.030000] Alignment trap: not handling instruction e1923f9f at [<c07ba864>] [ 1.030000] Unhandled fault: alignment exception (0x001) at 0x20736eae [ 1.030000] Internal error: : 1 [#2] SMP ARM [ 1.030000] Modules linked in: [ 1.030000] CPU: 0 PID: 29042 Comm: %s [ 1.030000] Not tainted 3.14.0-rc7-next-20140319 #1 [ 1.030000] task: c0990acc ti: ed83a000 task.ti: 70737573 [ 1.030000] PC is at _raw_spin_lock_irqsave+0x14/0x4c [ 1.030000] LR is at __down_read_trylock+0x14/0x54 [ 1.030000] pc : [<c07ba868>] lr : [<c027d15c>] psr: 40000193 [ 1.030000] sp : ed83bed8 ip : c0ae2388 fp : ed83bfc0 [ 1.030000] r10: 00000028 r9 : 20736eaa r8 : 0000017c [ 1.030000] r7 : c0990acc r6 : 00000017 r5 : 20736eae r4 : 20736eaa [ 1.030000] r3 : 00000193 r2 : 20736eae r1 : 00000000 r0 : 40000193 [ 1.030000] Flags: nZcv IRQs off FIQs on Mode SVC_32 ISA ARM Segment user [ 1.030000] Control: 10c5387d Table: bdbec04a DAC: 00000015 [ 1.030000] Process %s [ 1.030000] (pid: 29042, stack limit = 0x707377c3) [ 1.030000] Stack: (0xed83bed8 to 0x70739573) [ 1.030000] [<c07ba868>] (_raw_spin_lock_irqsave) from [<c027d15c>] (__down_read_trylock+0x14/0x54) [ 1.030000] [<c027d15c>] (__down_read_trylock) from [<c0217d8c>] (do_page_fault+0x78/0x27c) [ 1.030000] [<c0217d8c>] (do_page_fault) from [<c02083d4>] (do_DataAbort+0x38/0x98) [ 1.030000] [<c02083d4>] (do_DataAbort) from [<c0212218>] (__dabt_svc+0x38/0x60) [ 1.030000] Exception stack(0xed83bfc0 to 0xed83c008) [ 1.030000] bfc0: 0000017c 00000017 ed83c000 00000193 ed83c008 c0217d14 00000017 00000000 [ 1.030000] bfe0: 0000017c 00000000 ed85a000 ed83c0e0 c0ae2388 ed83c008 c02083d4 c0217d40 [ 1.030000] c000: 00000193 ffffffff [ 1.030000] Code: e10f0000 f10c0080 f592f000 e1923f9f (e2831801) [ 1.030000] ---[ end trace f46a64ce9c601cbc ]--- [ 1.030000] Alignment trap: not handling instruction e1923f9f at [<c07ba864>] [ 1.030000] Unhandled fault: alignment exception (0x001) at 0x20736eae ~$off # PYBOOT: Exception: timeout
========================================================================
Board cubie-multi_v7_defconfig failure log: -------------------------------------------------
tftp 0x40008000 next/next-20140319/multi_v7_defconfig/zImage Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.140 Filename 'next/next-20140319/multi_v7_defconfig/zImage'. Load address: 0x40008000 Loading: *################################################################# ################################################################# ########################################node: cubie status: on ######################### ################################################################# ##################################################### 2.8 MiB/s done Bytes transferred = 4580256 (45e3a0 hex) sun4i#setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 sun4i#tftp 0x41000000 next/next-20140319/multi_v7_defconfig/dtbs/sun4i-a10-cubieboard.dtb tftp 0x41000000 next/next-20140319/multi_v7_defconfig/dtbs/sun4i-a10-cubieboard.dtb Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.140 Filename 'next/next-20140319/multi_v7_defconfig/dtbs/sun4i-a10-cubieboard.dtb'. Load address: 0x41000000 Loading: *## 2.4 MiB/s done Bytes transferred = 15180 (3b4c hex) sun4i#printenv bootargs printenv bootargs bootargs=console=ttyS0,115200n8 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/cubie ip=dhcp sun4i#bootz 0x40008000 - 0x41000000 bootz 0x40008000 - 0x41000000 Kernel image @ 0x40008000 [ 0x000000 - 0x45e3a0 ] ## Flattened Device Tree blob at 41000000 Booting using the fdt blob at 0x41000000 Loading Device Tree to 40ff9000, end 40fffb4b ... OK
Starting kernel ...
~$off # PYBOOT: Exception: timeout
========================================================================
Board cubie-sunxi_defconfig failure log: -------------------------------------------------
DHCP client bound to address 172.16.1.140 sun4i#setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 sun4i#tftp 0x40008000 next/next-20140319/sunxi_defconfig/zImage tftp 0x40008000 next/next-20140319/sunxi_defconfig/zImage Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.140 Filename 'next/next-20140319/sunxi_defconfig/zImage'. Load address: 0x40008000 Loading: *################################################################# ########################################################## 2.6 MiB/s done Bytes transferred = 1801888 (1b7ea0 hex) sun4i#setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 sun4i#tftp 0x41000000 next/next-20140319/sunxi_defconfig/dtbs/sun4i-a10-cubieboard.dtb tftp 0x41000000 next/next-20140319/sunxi_defconfig/dtbs/sun4i-a10-cubieboard.dtb Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.140 Filename 'next/next-20140319/sunxi_defconfig/dtbs/sun4i-a10-cubieboard.dtb'. Load address: 0x41000000 Loading: *## 2.4 MiB/s done Bytes transferred = 15180 (3b4c hex) sun4i#printenv bootargs printenv bootargs bootargs=console=ttyS0,115200n8 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/cubie ip=dhcp sun4i#bootz 0x40008000 - 0x41000000 bootz 0x40008000 - 0x41000000 Kernel image @ 0x40008000 [ 0x000000 - 0x1b7ea0 ] ## Flattened Device Tree blob at 41000000 Booting using the fdt blob at 0x41000000 Loading Device Tree to 40ff9000, end 40fffb4b ... OK
Starting kernel ...
~$off # PYBOOT: Exception: timeout
========================================================================
Board cubie2-multi_lpae_defconfig failure log: -------------------------------------------------
tftp 0x40008000 next/next-20140319/multi_lpae_defconfig/zImage Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.156 Filename 'next/next-20140319/multi_lpae_defconfig/zImage'. Load address: 0x40008000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ###################################################### 3.8 MiB/s done Bytes transferred = 4605720 (464718 hex) sun7i# setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 sun7i# tftp 0x41000000 next/next-20140319/multi_lpae_defconfig/dtbs/sun7i-a20-cubieboard2.dtb tftp 0x41000node: cubie2 status: on 000 next/next-20140319/multi_lpae_defconfig/dtbs/sun7i-a20-cubieboard2.dtb Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.156 Filename 'next/next-20140319/multi_lpae_defconfig/dtbs/sun7i-a20-cubieboard2.dtb'. Load address: 0x41000000 Loading: *## 3.5 MiB/s done Bytes transferred = 18209 (4721 hex) sun7i# printenv bootargs printenv bootargs bootargs=console=ttyS0,115200n8 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/cubie2 ip=dhcp sun7i# bootz 0x40008000 - 0x41000000 bootz 0x40008000 - 0x41000000 Kernel image @ 0x40008000 [ 0x000000 - 0x464718 ] ## Flattened Device Tree blob at 41000000 Booting using the fdt blob at 0x41000000 Loading Device Tree to 40ff8000, end 40fff720 ... OK
Starting kernel ...
~$off # PYBOOT: Exception: timeout
========================================================================
Board cubie2-multi_v7_defconfig failure log: -------------------------------------------------
tftp 0x40008000 next/next-20140319/multi_v7_defconfig/zImage Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.156 Filename 'next/next-20140319/multi_v7_defconfig/zImage'. Load address: 0x40008000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ##################################################### 4 MiB/s done Bytes transferred = 4580256 (45e3a0 hex) sun7i# setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 sun7i# tftp 0x41000000 next/next-20140319/multi_v7_defconfig/dtbs/sun7i-a20-cubieboard2.dtb tftp 0x41000000 next/next-20140319/multi_v7_defconfig/dtbs/sun7i-a20-cubieboard2.dtb Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.156 Filename 'next/next-20140319/multi_v7_defconfig/dtbs/sun7i-a20-cubieboard2.dtb'. Load address: 0x41000000 Loading: *## 3.5 MiB/s done Bytes transferred = 18209 (4721 hex) sun7i#printenv bootargs printenv bootargs bootargs=console=ttyS0,115200n8 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/cubie2 ip=dhcp sun7i# bootz 0x40008000 - 0x41000000 bootz 0x40008000 - 0x41000000 Kernel image @ 0x40008000 [ 0x000000 - 0x45e3a0 ] ## Flattened Device Tree blob at 41000000 Booting using the fdt blob at 0x41000000 Loading Device Tree to 40ff8000, end 40fff720 ... OK
Starting kernel ...
node: cubie2 status: on ~$off # PYBOOT: Exception: timeout
========================================================================
Board cubie2-sunxi_defconfig failure log: -------------------------------------------------
DHCP client bound to address 172.16.1.156 sun7i# setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 sun7i# tftp 0x40008000 next/next-20140319/sunxi_defconfig/zImage tftp 0x40008000 next/next-20140319/sunxi_defconfig/zImage Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.156 Filename 'next/next-20140319/sunxi_defconfig/zImage'. Load address: 0x40008000 Loading: *################################################################# ########################################################## 4 MiB/s done Bytes transferred = 1801888 (1b7ea0 hex) sun7i# setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 sun7i# tftp 0x41000000 next/next-20140319/sunxi_defconfig/dtbs/sun7i-a20-cubieboard2.dtb tftp 0x41000000 next/next-20140319/sunxi_defconfig/dtbs/sun7i-a20-cubieboard2.dtb Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.156 Filename 'next/next-20140319/sunxi_defconfig/dtbs/sun7i-a20-cubieboard2.dtb'. Load address: 0x41000000 Loading: *## 4.3 MiB/s done Bytes transferred = 18209 (4721 hex) sun7i# printenv bootargs printenv bootargs bootargs=console=ttyS0,115200n8 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/cubie2 ip=dhcp sun7i# bootz 0x40008000 - 0x41000000 bootz 0x40008000 - 0x41000000 Kernel image @ 0x40008000 [ 0x000000 - 0x1b7ea0 ] ## Flattened Device Tree blob at 41000000 Booting using the fdt blob at 0x41000000 Loading Device Tree to 40ff8000, end 40fff720 ... OK
Starting kernel ...
~$off # PYBOOT: Exception: timeout
========================================================================
Board dalmore-multi_lpae_defconfig failure log: -------------------------------------------------
Tegra114 (Dalmore) # tftp 0x82000000 next/next-20140319/multi_lpae_defconfig/zImage tftp 0x82000000 next/next-20140319/multi_lpae_defconfig/zImage Using asx0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.129 Filename 'next/next-20140319/multi_lpae_defconfig/zImage'. Load address: 0x82000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ###################################################### 2.8 MiB/s done Bytes transferred = 4605720 (464718 hex) Tegra114 (Dalmore) # setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 Tegra114 (Dalmore) # tftp 0x83000000 next/next-20140319/multi_lpae_defconfig/dtbs/tegra114-dalmore.dtb tftp 0x83000000 next/next-20140319/multi_lpae_defconfig/dtbs/tegra114-dalmore.dtb Using asx0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.129 Filename 'next/next-20140319/multi_lpae_defconfig/dtbs/tegra114-dalmore.dtb'. Load address: 0x83000000 Loading: *### 2.7 MiB/s done Bytes transferred = 34067 (8513 hex) Tegra114 (Dalmore) # printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 root=/dev/mmcblk0p1 rootwait debug earlyprintk Tegra114 (Dalmore) #bootz 0x82000000 - 0x83000000 bootz 0x82000000 - 0x83000000 Kernel image @ 0x82000000 [ 0x000000 - 0x464718 ] ## Flattened Device Tree blob at 83000000 Booting using the fdt blob at 0x83000000 Loading Device Tree to 8fff4000, end 8ffff512 ... OK
Starting kernel ...
~$off # PYBOOT: Exception: timeout
========================================================================
Board dalmore-multi_v7_defconfig failure log: -------------------------------------------------
Tegra114 (Dalmore) # tftp 0x82000000 next/next-20140319/multi_v7_defconfig/zImage tftp 0x82000000 next/next-20140319/multi_v7_defconfig/zImage Using asx0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.129 Filename 'next/next-20140319/multi_v7_defconfig/zImage'. Load address: 0x82000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ##################################################### 2.8 MiB/s done Bytes transferred = 4580256 (45e3a0 hex) Tegra114 (Dalmore) # setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 Tegra114 (Dalmore) # tftp 0x83000000 next/next-20140319/multi_v7_defconfig/dtbs/tegra114-dalmore.dtb tftp 0x83000000 next/next-20140319/multi_v7_defconfig/dtbs/tegra114-dalmore.dtb Using asx0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.129 Filename 'next/next-20140319/multi_v7_defconfig/dtbs/tegra114-dalmore.dtb'. Load address: 0x83000000 Loading: *### 2.5 MiB/s done Bytes transferred = 34067 (8513 hex) Tegra114 (Dalmore) # printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 root=/dev/mmcblk0p1 rootwait debug earlyprintk Tegra114 (Dalmore) # bootz 0x82000000 - 0x83000000 bootz 0x82000000 - 0x83000000 Kernel image @ 0x82000000 [ 0x000000 - 0x45e3a0 ] ## Flattened Device Tree blob at 83000000 Booting using the fdt blob at 0x83000000 Loading Device Tree to 8fff4000, end 8ffff512 ... OK
Starting kernel ...
~$off # PYBOOT: Exception: timeout
========================================================================
Board dalmore-tegra_defconfig failure log: -------------------------------------------------
[ 1.062018] avdd-usb: 3300 mV [ 1.064016] avdd-usb: supplied by vdd-sys-5v0 [ 1.070233] rail-3v3: no parameters [ 1.074165] rail-5v0: no parameters [ 1.077751] REGEN3: no parameters [ 1.080673] SYSEN1: no parameters [ 1.084180] SYSEN2: no parameters [ 1.089373] Linux video capture interface: v2.00 [ 1.095907] platform 70019010.iommu: Driver tegra-smmu requests probe deferral [ 1.102854] Advanced Linux Sound Architecture Driver Initialized. [ 1.112580] Bluetooth: Core ver 2.19 [ 1.114690] NET: Registered protocol family 31 [ 1.118862] Bluetooth: HCI device and connection manager initialized [ 1.125386] Bluetooth: HCI socket layer initialized [ 1.130270] Bluetooth: L2CAP socket layer initialized [ 1.135591] Bluetooth: SCO socket layer initialized [ 1.142897] cfg80211: Calling CRDA to update world regulatory domain [ 1.149777] Switched to clocksource arch_sys_counter [ 1.238220] NET: Registered protocol family 2 [ 1.244652] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 1.250331] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 1.257034] TCP: Hash tables configured (established 8192 bind 8192) [ 1.264504] TCP: reno registered [ 1.266127] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 1.272279] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 1.279836] NET: Registered protocol family 1 [ 1.285543] RPC: Registered named UNIX socket transport module. [ 1.289663] RPC: Registered udp transport module. [ 1.294497] RPC: Registered tcp transport module. [ 1.299198] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.305765] PCI: CLS 0 bytes, default 64 [ 1.325132] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 1.333842] bounce pool size: 64 pages [ 1.341518] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.348499] msgmni has been set to 1468 [ 1.357223] io scheduler noop registered (default) [ 1.389455] tegra114-pinctrl 70000868.pinmux: Config param 000e not supported on group drive_gma [ 1.396511] tegra114-pinctrl 70000868.pinmux: pin_config_group_set op failed for group 199 [ 1.404820] tegra114-pinctrl 70000868.pinmux: Error applying setting,~$off # PYBOOT: Exception: timeout
========================================================================
Board hummingboard-multi_v7_defconfig failure log: -------------------------------------------------
[ 0.985619] hub 1-0:1.0: 1 port detected [ 0.990791] ci_hdrc ci_hdrc.1: doesn't support gadget [ 0.995892] ci_hdrc ci_hdrc.1: EHCI Host Controller [ 1.000810] ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 2 [ 1.025669] ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00 [ 1.031803] hub 2-0:1.0: USB hub found [ 1.035595] hub 2-0:1.0: 1 port detected [ 1.040314] mousedev: PS/2 mouse device common for all mice [ 1.047860] i2c /dev entries driver [ 1.053685] sdhci: Secure Digital Host Controller Interface driver [ 1.059917] sdhci: Copyright(c) Pierre Ossman [ 1.064966] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.071524] sdhci-esdhc-imx 2194000.usdhc: could not get ultra high speed state, work on normal mode [ 1.080717] mmc0: no vqmmc regulator found [ 1.125676] mmc0: SDHCI controller on 2194000.usdhc [2194000.usdhc] using ADMA [ 1.133633] usbcore: registered new interface driver usbhid [ 1.139251] usbhid: USB HID core driver [ 1.149756] TCP: cubic registered [ 1.153113] NET: Registered protocol family 17 [ 1.157780] Key type dns_resolver registered [ 1.162181] ThumbEE CPU extension supported. [ 1.166508] Registering SWP/SWPB emulation handler [ 1.171309] PJ4 iWMMXt coprocessor enabled. [ 1.178960] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 1.194133] ALSA device list: [ 1.197191] No soundcards found. [ 1.201250] Waiting for root device /dev/mmcblk0p2... [ 1.253277] mmc0: host does not support reading read-only switch. assuming write-enable. [ 1.267408] mmc0: new high speed SDHC card at address b368 [ 1.273260] mmcblk0: mmc0:b368 00000 7.51 GiB [ 1.279259] mmcblk0: p1 p2 [ 1.317012] EXT4-fs (mmcblk0p2): couldn't mount as ext3 due to feature incompatibilities [ 1.326127] EXT4-fs (mmcblk0p2): couldn't mount as ext2 due to feature incompatibilities [ 1.348033] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) [ 1.356191] VFS: Mounted root (ext4 filesystem) readonly on device 179:2. [ 1.372237] devtmpfs: mounted [ 1.375600] Freeing unused kernel memory: 544K (c0a4e000 - c0ad6000) [ 1.422730] Internal error: Oops - undefined instruction: 0 [#1] SMP ARM ~$off # PYBOOT: Exception: timeout
========================================================================
Board omap5uevm-multi_lpae_defconfig failure log: -------------------------------------------------
Waiting for Ethernet connection... done. Using sms0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.178 Filename 'next/next-20140319/multi_lpae_defconfig/zImage'. Load address: 0x81000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ###################################################### 2.3 MiB/s done Bytes transferred = 4605720 (464718 hex) U-Boot# setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 U-Boot# tftp 0x82000000 next/next-20140319/multi_lpae_defconfig/dtbs/omap5-uevm.dtb tftp 0x82000000 next/next-20140319/multi_lpae_defconfig/dtbs/omap5-uevm.dtb Waiting for Ethernet connection... done. Using sms0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.178 Filename 'next/next-20140319/multi_lpae_defconfig/dtbs/omap5-uevm.dtb'. Load address: 0x82000000 Loading: *#### 2.3 MiB/s done Bytes transferred = 44884 (af54 hex) U-Boot# printenv bootargs printenv bootargs bootargs=console=ttyO2,115200 root=/dev/mmcblk1p2 rootwait debug U-Boot# bootz 0x81000000 - 0x82000000 bootz 0x81000000 - 0x82000000 Kernel image @ 0x81000000 [ 0x000000 - 0x464718 ] ## Flattened Device Tree blob at 82000000 Booting using the fdt blob at 0x82000000 Using Device Tree in place at 82000000, end 8200df53
Starting kernel ...
~$off # PYBOOT: Exception: timeout
========================================================================
Board omap5uevm-multi_v7_defconfig failure log: -------------------------------------------------
Waiting for Ethernet connection... done. Using sms0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.178 Filename 'next/next-20140319/multi_v7_defconfig/zImage'. Load address: 0x81000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ##################################################### 2.1 MiB/s done Bytes transferred = 4580256 (45e3a0 hex) U-Boot# setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 U-Boot# tftp 0x82000000 next/next-20140319/multi_v7_defconfig/dtbs/omap5-uevm.dtb tftp 0x82000000 next/next-20140319/multi_v7_defconfig/dtbs/omap5-uevm.dtb Waiting for Ethernet connection... done. Using sms0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.178 Filename 'next/next-20140319/multi_v7_defconfig/dtbs/omap5-uevm.dtb'. Load address: 0x82000000 Loading: *#### 2 MiB/s done Bytes transferred = 44884 (af54 hex) U-Boot# printenv bootargs printenv bootargs bootargs=console=ttyO2,115200 root=/dev/mmcblk1p2 rootwait debug U-Boot# bootz 0x81000000 - 0x82000000 bootz 0x81000000 - 0x82000000 Kernel image @ 0x81000000 [ 0x000000 - 0x45e3a0 ] ## Flattened Device Tree blob at 82000000 Booting using the fdt blob at 0x82000000 Using Device Tree in place at 82000000, end 8200df53
Starting kernel ...
~$off # PYBOOT: Exception: timeout
========================================================================
Board omap5uevm-omap2plus_defconfig failure log: -------------------------------------------------
Waiting for Ethernet connection... done. Using sms0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.178 Filename 'next/next-20140319/omap2plus_defconfig/zImage'. Load address: 0x81000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################## 2.3 MiB/s done Bytes transferred = 4306968 (41b818 hex) U-Boot#setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 U-Boot# tftp 0x82000000 next/next-20140319/omap2plus_defconfig/dtbs/omap5-uevm.dtb tftp 0x82000000 next/next-20140319/omap2plus_defconfig/dtbs/omap5-uevm.dtb Waiting for Ethernet connection... done. Using sms0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.178 Filename 'next/next-20140319/omap2plus_defconfig/dtbs/omap5-uevm.dtb'. Load address: 0x82000000 Loading: *#### 2.1 MiB/s done Bytes transferred = 44884 (af54 hex) U-Boot# printenv bootargs printenv bootargs bootargs=console=ttyO2,115200 root=/dev/mmcblk1p2 rootwait debug U-Boot# bootz 0x81000000 - 0x82000000 bootz 0x81000000 - 0x82000000 Kernel image @ 0x81000000 [ 0x000000 - 0x41b818 ] ## Flattened Device Tree blob at 82000000 Booting using the fdt blob at 0x82000000 Using Device Tree in place at 82000000, end 8200df53
Starting kernel ...
~$off # PYBOOT: Exception: timeout
========================================================================
Board panda-multi_v7_defconfig failure log: -------------------------------------------------
################################################################# ################################################################# ################################################################# ##################################################### done Bytes transferred = 4580320 (45e3e0 hex) Panda # setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 Panda # tftp 0x81f00000 next/next-20140319/multi_v7_defconfig/dtbs/omap4-panda-es.dtb tftp 0x81f00000 next/next-20140319/multi_v7_defconfig/dtbs/omap4-panda-es.dtb Waiting for Ethernet connection... done. Using sms0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.182 Filename 'next/next-20140319/multi_v7_defconfig/dtbs/omap4-panda-es.dtb'. Load address: 0x81f00000 Loading: *#### done Bytes transferred = 52383 (cc9f hex) Panda # printenv bootargs printenv bootargs bootargs=console=ttyO2,115200 root=/dev/mmcblk0p2 rootwait debug earlyprintk Panda # bootm 0x82000000 - 0x81f00000 bootm 0x82000000 - 0x81f00000 ## Booting kernel from Legacy Image at 82000000 ... Image Name: Linux Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 4580256 Bytes = 4.4 MiB Load Address: 80008000 Entry Point: 80008000 Verifying Checksum ... OK ## Flattened Device Tree blob at 81f00000 Booting using the fdt blob at 0x81f00000 Loading Kernel Image ... OK OK Using Device Tree in place at 81f00000, end 81f0fc9e
Starting kernel ...
~$off # PYBOOT: Exception: timeout
========================================================================
Board panda-omap2plus_defconfig failure log: -------------------------------------------------
################################################################# ################################################################# ################################################################# ################################## done Bytes transferred = 4307032 (41b858 hex) Panda # setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 Panda # tftp 0x81f00000 next/next-20140319/omap2plus_defconfig/dtbs/omap4-panda-es.dtb tftp 0x81f00000 next/next-20140319/omap2plus_defconfig/dtbs/omap4-panda-es.dtb Waiting for Ethernet connection... done. Using sms0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.182 Filename 'next/next-20140319/omap2plus_defconfig/dtbs/omap4-panda-es.dtb'. Load address: 0x81f00000 Loading: *#### done Bytes transferred = 52383 (cc9f hex) Panda # printenv bootargs printenv bootargs bootargs=console=ttyO2,115200 root=/dev/mmcblk0p2 rootwait debug earlyprintk Panda # bootm 0x82000000 - 0x81f00000 bootm 0x82000000 - 0x81f00000 ## Booting kernel from Legacy Image at 82000000 ... Image Name: Linux Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 4306968 Bytes = 4.1 MiB Load Address: 80008000 Entry Point: 80008000 Verifying Checksum ... OK ## Flattened Device Tree blob at 81f00000 Booting using the fdt blob at 0x81f00000 Loading Kernel Image ... OK OK Using Device Tree in place at 81f00000, end 81f0fc9e
Starting kernel ...
~$off # PYBOOT: Exception: timeout
========================================================================
Board seaboard-multi_v7_defconfig failure log: -------------------------------------------------
[ 2.035456] [<c04f3470>] (tegra_drm_load) from [<c04e1244>] (drm_dev_register+0xa8/0x104) [ 2.035471] [<c04e1244>] (drm_dev_register) from [<c04f3040>] (drm_host1x_init+0x30/0x8c) [ 2.035486] [<c04f3040>] (drm_host1x_init) from [<c050379c>] (host1x_subdev_register+0xb4/0xd0) [ 2.035501] [<c050379c>] (host1x_subdev_register) from [<c0503d48>] (host1x_client_register+0xf8/0x11c) [ 2.035516] [<c0503d48>] (host1x_client_register) from [<c04f74a0>] (tegra_dc_probe+0x154/0x290) [ 2.035534] [<c04f74a0>] (tegra_dc_probe) from [<c0511634>] (platform_drv_probe+0x18/0x48) [ 2.035550] [<c0511634>] (platform_drv_probe) from [<c050fe90>] (driver_probe_device+0x124/0x240) [ 2.035565] [<c050fe90>] (driver_probe_device) from [<c050e548>] (bus_for_each_drv+0x58/0x8c) [ 2.035579] [<c050e548>] (bus_for_each_drv) from [<c050fd3c>] (device_attach+0x74/0x88) [ 2.035593] [<c050fd3c>] (device_attach) from [<c050f3e4>] (bus_probe_device+0x84/0xa8) [ 2.035608] [<c050f3e4>] (bus_probe_device) from [<c050f820>] (deferred_probe_work_func+0x68/0x98) [ 2.035626] [<c050f820>] (deferred_probe_work_func) from [<c025a1a4>] (process_one_work+0x10c/0x37c) [ 2.035644] [<c025a1a4>] (process_one_work) from [<c025aec4>] (worker_thread+0x13c/0x404) [ 2.035662] [<c025aec4>] (worker_thread) from [<c02605c4>] (kthread+0xd8/0xf0) [ 2.035680] [<c02605c4>] (kthread) from [<c020e638>] (ret_from_fork+0x14/0x3c) [ 2.035686] ---[ end trace bc65aaa2d2555931 ]--- [ 5.032228] [sched_delayed] sched: RT throttling activated [ 5.034550] mmc0: new SDIO card at address 0001 [ 5.052555] Console: switching to colour frame buffer device 170x48 [ 5.078958] host1x drm: fb0: frame buffer device [ 5.083660] host1x drm: registered panic notifier [ 5.088368] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 5.097126] tegra-ehci c5000000.usb: EHCI Host Controller [ 5.102546] tegra-ehci c5000000.usb: new USB bus registered, assigned bus number 3 [ 5.110444] tegra-ehci c5000000.usb: irq 52, io mem 0xc5000000 [ 5.142267] usb 2-1: new high-speed USB device number 2 using tegra-ehci [ 5.162248] tegra-ehci c5000000.usb: USB 2.0 started, EHCI 1.00 [ 5.168732] hub 3-0:1.0: USB hub found [ 5.172514] hub 3-0:1.0: 1 port detected [ 5.177246] input: gpio-keys.4 as /devices/soc0/gpio-keys.4/input/input4 [ 5.184439] tps6586x-rtc tps6586x-rtc: setting system clock to 2014-03-19 08:24:28 UTC (1395217468) [ 5.196372] ALSA device list: [ 5.199333] #0: NVIDIA Tegra Seaboard [ 5.207850] EXT4-fs (mmcblk0p3): mounting ext3 file system using the ext4 subsystem [ 5.245957] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: (null) [ 5.254082] VFS: Mounted root (ext3 filesystem) readonly on device 179:3. [ 5.294903] devtmpfs: mounted [ 5.298400] Freeing unused kernel memory: 544K (c0a4e000 - c0ad6000) ~$off # PYBOOT: Exception: timeout
========================================================================
Board snowball-multi_v7_defconfig failure log: -------------------------------------------------
node: snowball status: on *** Unhandled DHCP Option in OFFER/ACK: 28 *** Unhandled DHCP Option in OFFER/ACK: 28 DHCP client bound to address 172.16.1.124 U8500 $ setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 U8500 $ tftp 0x00100000 tmp/snowball-_XV0Tv/tmpQnvpEy-uImage tftp 0x00100000 tmp/snowball-_XV0Tv/tmpQnvpEy-uImage smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC 08:00:08:1e:0f:44 Using smc911x-0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.124 Filename 'tmp/snowball-_XV0Tv/tmpQnvpEy-uImage'. Load address: 0x100000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ####################################################### done Bytes transferred = 4621569 (468501 hex) U8500 $ printenv bootargs printenv bootargs bootargs=console=ttyAMA2,115200 root=/dev/mmcblk0p4 rootwait rw debug earlyprintk U8500 $bootm 0x00100000 bootm 0x00100000 ## Booting kernel from Legacy Image at 00100000 ... Image Name: Linux Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 4621505 Bytes = 4.4 MB Load Address: 00008000 Entry Point: 00008000 Loading Kernel Image ... OK OK
Starting kernel ...
~$off # PYBOOT: Exception: timeout
========================================================================
Board trimslice-multi_v7_defconfig failure log: -------------------------------------------------
[ 3.417436] hub 2-0:1.0: 1 port detected [ 3.424834] tegra-ehci c5000000.usb: EHCI Host Controller [ 3.430249] tegra-ehci c5000000.usb: new USB bus registered, assigned bus number 3 [ 3.437979] tegra-ehci c5000000.usb: irq 52, io mem 0xc5000000 [ 3.458819] tegra-ehci c5000000.usb: USB 2.0 started, EHCI 1.00 [ 3.465889] hub 3-0:1.0: USB hub found [ 3.470439] hub 3-0:1.0: 1 port detected [ 3.475853] input: gpio-keys.2 as /devices/soc0/gpio-keys.2/input/input0 [ 3.483383] rtc-em3027 2-0056: setting system clock to 2014-03-19 08:24:27 UTC (1395217467) [ 3.497603] ALSA device list: [ 3.500574] #0: tegra-trimslice [ 3.504719] Waiting for root device /dev/sda1... [ 3.737303] usb 2-1: new high-speed USB device number 2 using tegra-ehci [ 3.890021] hub 2-1:1.0: USB hub found [ 3.894084] hub 2-1:1.0: 4 ports detected [ 4.067392] usb 3-1: new high-speed USB device number 2 using tegra-ehci [ 4.283058] usb-storage 3-1:1.0: USB Mass Storage device detected [ 4.290083] scsi0 : usb-storage 3-1:1.0 [ 4.387560] usb 2-1.1: new high-speed USB device number 3 using tegra-ehci [ 4.850639] asix 2-1.1:1.0 eth1: register 'asix' at usb-c5008000.usb-1.1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:28:b1 [ 6.180583] scsi 0:0:0:0: Direct-Access SanDisk SSD P4 8GB 0015 PQ: 0 ANSI: 0 [ 6.191467] sd 0:0:0:0: [sda] 15649196 512-byte logical blocks: (8.01 GB/7.46 GiB) [ 6.200525] sd 0:0:0:0: [sda] Write Protect is off [ 6.206651] sd 0:0:0:0: [sda] No Caching mode page found [ 6.212066] sd 0:0:0:0: [sda] Assuming drive cache: write through [ 6.222923] sd 0:0:0:0: [sda] No Caching mode page found [ 6.228341] sd 0:0:0:0: [sda] Assuming drive cache: write through [ 6.236571] sda: sda1 [ 6.244425] sd 0:0:0:0: [sda] No Caching mode page found [ 6.249855] sd 0:0:0:0: [sda] Assuming drive cache: write through [ 6.255977] sd 0:0:0:0: [sda] Attached SCSI disk [ 6.262100] EXT4-fs (sda1): couldn't mount as ext3 due to feature incompatibilities [ 6.271564] EXT4-fs (sda1): couldn't mount as ext2 due to feature incompatibilities [ 6.309995] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 6.317828] VFS: Mounted root (ext4 filesystem) on device 8:1. [ 6.339370] devtmpfs: mounted [ 6.343731] Freeing unused kernel memory: 544K (c0a4e000 - c0ad6000) [ 6.396030] Internal error: Oops - undefined instruction: 0 [#1] SMP ARM ~$off # PYBOOT: Exception: timeout
========================================================================
Board wandboard-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.374009] mmc1: queuing unknown CIS tuple 0x80 (7 bytes) [ 1.376061] mmc1: queuing unknown CIS tuple 0x80 (4 bytes) [ 1.388502] EXT4-fs (mmcblk0p2): couldn't mount as ext2 due to feature incompatibilities [ 1.406038] mmc1: queuing unknown CIS tuple 0x02 (1 bytes) [ 1.411827] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) [ 1.418896] mmc1: new SDIO card at address 0001 [ 1.424510] VFS: Mounted root (ext4 filesystem) readonly on device 179:2. [ 1.440926] devtmpfs: mounted [ 1.444341] Freeing unused kernel memory: 544K (c0a4e000 - c0ad6000) [ 1.476909] mmc2: host does not support reading read-only switch. assuming write-enable. [ 1.487464] Internal error: Oops - undefined instruction: 0 [#1] SMP ARM [ 1.490914] mmc2: new high speed SDHC card at address 0001 [ 1.499745] Alignment trap: not handling instruction e1923f9f at [<c07ba864>] [ 1.506886] Unhandled fault: alignment exception (0x001) at 0x20736eae [ 1.513416] Internal error: : 1 [#2] SMP ARM [ 1.517688] Modules linked in: [ 1.520767] CPU: 0 PID: 29042 Comm: %s [ 1.520767] Not tainted 3.14.0-rc7-next-20140319 #1 [ 1.529564] task: c0990acc ti: ec846000 task.ti: 70737573 [ 1.534976] PC is at _raw_spin_lock_irqsave+0x14/0x4c [ 1.540036] LR is at __down_read_trylock+0x14/0x54 [ 1.544831] pc : [<c07ba868>] lr : [<c027d15c>] psr: 40000193 [ 1.544831] sp : ec847fd8 ip : c0ae2388 fp : ec8480c0 [ 1.556310] r10: 00000028 r9 : 20736eaa r8 : 0000017c [ 1.561537] r7 : c0990acc r6 : 00000017 r5 : 20736eae r4 : 20736eaa [ 1.568065] r3 : 20000193 r2 : 20736eae r1 : 00000000 r0 : 40000193 [ 1.574599] Flags: nZcv IRQs off FIQs on Mode SVC_32 ISA ARM Segment user [ 1.581824] Control: 10c5387d Table: 3cd3404a DAC: 00000015 [ 1.587572] Process %s [ 1.587572] (pid: 29042, stack limit = 0x707377c3) [ 1.594886] Stack: (0xec847fd8 to 0x70739573) [ 1.599261] [<c07ba868>] (_raw_spin_lock_irqsave) from [<c027d15c>] (__down_read_trylock+0x14/0x54) [ 1.608327] [<c027d15c>] (__down_read_trylock) from [<c0217d8c>] (do_page_fault+0x78/0x27c) [ 1.616687] Code: e10f0000 f10c0080 f592f000 e1923f9f (e2831801) [ 1.622786] ---[ end trace ef0f1f6556e398be ]--- [ 1.627410] Alignment trap: not handling instruction e1923f9f at [<c07ba864>] [ 1.634547] Unhandled fault: alignment exception (0x001) at 0x20736eae [ 60.319240] imx-sdma 20ec000.sdma: firmware not found ~$off # PYBOOT: Exception: timeout