Automated DT boot report for various ARM defconfigs.
Boot test simply checks if kernel can boot to initramfs with busybox and run some basic commands (e.g. 'cat /proc/cpuinfo').
Tree/Branch: arm-soc/for-next Git describe: v3.11-rc7-851-gca59147 Commit: ca5914710f ARM: next: added back arm-soc-for-next-contents.txt
Failed boot tests (console logs at the end) =========================================== exynos5250-arndale: FAIL: arm-exynos_defconfig
Full Report ===========
arm-imx_v6_v7_defconfig ----------------------- imx6dl-wandboard PASS: 0 min 18.2 sec imx6q-wandboard PASS: 0 min 16.1 sec
arm-multi_v7_defconfig ---------------------- omap4-panda-es PASS: 1 min 4.8 sec omap3-beagle-xm PASS: 0 min 56.6 sec sun4i-a10-cubieboard PASS: 0 min 15.8 sec am335x-bone,am335xboneb PASS: 0 min 34.5 sec am335x-bone,am335xbone PASS: 0 min 35.9 sec omap3-tobi,3530overo PASS: 0 min 22.6 sec omap4-panda PASS: 1 min 8.7 sec imx6dl-wandboard PASS: 0 min 18.5 sec imx6q-wandboard PASS: 0 min 18.2 sec omap3-tobi,3730storm PASS: 0 min 22.7 sec omap3-beagle PASS: 0 min 59.5 sec
arm-exynos_defconfig -------------------- exynos5250-arndale FAIL: 0 min 0.0 sec
arm-omap2plus_defconfig ----------------------- omap3-beagle-xm PASS: 1 min 0.5 sec am335x-bone,am335xboneb PASS: 0 min 28.9 sec am335x-bone,am335xbone PASS: 0 min 29.2 sec omap3-tobi,3530overo PASS: 0 min 24.8 sec omap4-panda PASS: 1 min 6.5 sec omap4-panda-es PASS: 1 min 7.1 sec omap3-tobi,3730storm PASS: 0 min 24.7 sec omap3-beagle PASS: 0 min 59.5 sec
Console logs for failures =========================
arm-exynos_defconfig --------------------
exynos5250-arndale: FAIL: last 24 lines of boot log: ----------------------------------------------------
U-Boot 2013.01.-rc1-dirty (Jun 28 2013 - 07:14:48) for ARNDALE5250 arm-linux-gnueabi-gcc (Ubuntu/Linaro 4.7.2-1ubuntu1) 4.7.2 GNU ld (GNU Binutils for Ubuntu) 2.22.90.20120919 ARNDALE5250 # if test -n ${initenv}; then run initenv; fi if test -n ${initenv}; then run initenv; fi ARNDALE5250 # if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi (Re)start USB... USB0: USB EHCI 1.00 scanning bus 0 for devices... 4 USB Device(s) found scanning usb for storage devices... 0 Storage Device(s) found scanning usb for ethernet devices... 1 Ethernet Device(s) found ARNDALE5250 # setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no ARNDALE5250 # dhcp dhcp Waiting for Ethernet connection... done. BOOTP broadcast 1 BOOTP broadcast 2 ~$off # PYBOOT: Exception: u-boot: ERROR: timed-out getting DHCP address. # PYBOOT: Time: 0.00 seconds. # PYBOOT: Result: FAIL