Full logs are available at http://arm-soc.lixom.net/bootlogs/mainline/v4.6-1631-gb80fed9/
Failed boards:
arndale multi_v7_nosmp_defconfig : NO BUILD bbb arm-omap2plus_defconfig : FAILED 1:54.12 bbb arm-multi_v7_defconfig : FAILED 2:01.49 bbb multi_v7_nosmp_defconfig : NO BUILD beagleboard-x15 arm-omap2plus_defconfig : FAILED 1:44.29 beagleboard-x15 arm-multi_v7_defconfig : FAILED 1:45.07 beagleboard-x15 arm-multi_lpae_defconfig : FAILED 1:53.07 beagleboard-x15 multi_v7_nosmp_defconfig : NO BUILD beaver multi_v7_nosmp_defconfig : NO BUILD capri multi_v7_nosmp_defconfig : NO BUILD chitra powerpc-pasemi_defconfig : BUILD FAILED colibri-vf61 multi_v7_nosmp_defconfig : NO BUILD colombus multi_v7_nosmp_defconfig : NO BUILD cosmic arm-imx_v6_v7_defconfig : FAILED 2:01.56 cosmic arm-multi_v7_defconfig : FAILED 2:06.63 cosmic multi_v7_nosmp_defconfig : NO BUILD cubie multi_v7_nosmp_defconfig : NO BUILD cubie2 multi_v7_nosmp_defconfig : NO BUILD cubox multi_v7_nosmp_defconfig : NO BUILD dalmore arm-tegra_defconfig : FAILED 1:48.64 dalmore arm-multi_v7_defconfig : FAILED 1:59.48 dalmore arm-multi_lpae_defconfig : FAILED 1:54.71 dalmore multi_v7_nosmp_defconfig : NO BUILD hummingboard multi_v7_nosmp_defconfig : NO BUILD jetsontk1 multi_v7_nosmp_defconfig : NO BUILD minnowmax minnowmax_defconfig : NO BUILD odroidu3 arm-exynos_defconfig : FAILED 1:48.51 omap5uevm arm-omap2plus_defconfig : FAILED 2:08.58 omap5uevm arm-multi_v7_defconfig : FAILED 2:06.23 omap5uevm arm-multi_lpae_defconfig : FAILED 2:06.95 omap5uevm multi_v7_nosmp_defconfig : NO BUILD pandaes multi_v7_nosmp_defconfig : NO BUILD parallella multi_v7_nosmp_defconfig : NO BUILD pi multi_v7_nosmp_defconfig : NO BUILD pit multi_v7_nosmp_defconfig : NO BUILD rk3288evb multi_v7_nosmp_defconfig : NO BUILD seaboard multi_v7_nosmp_defconfig : NO BUILD snow multi_v7_nosmp_defconfig : NO BUILD snowball arm-u8500_defconfig : FAILED 1:55.18 snowball arm-multi_v7_defconfig : FAILED 2:06.24 snowball multi_v7_nosmp_defconfig : NO BUILD socfpga multi_v7_nosmp_defconfig : NO BUILD trimslice multi_v7_nosmp_defconfig : NO BUILD wandboard multi_v7_nosmp_defconfig : NO BUILD
Successful boards:
apc arm-vt8500_v6_v7_defconfig : passed 1:12.99 arndale arm-exynos_defconfig : passed 1:28.49 arndale arm-multi_v7_defconfig : passed 1:22.66 arndale arm-multi_lpae_defconfig : passed 1:29.09 capri arm-bcm_defconfig : passed 0:52.51 capri arm-multi_v7_defconfig : passed 0:56.85 chitra powerpc-ppc64_defconfig : passed 3:06.65 colombus arm-sunxi_defconfig : passed 2:21.41 colombus arm-multi_v7_defconfig : passed 2:40.46 colombus arm-multi_lpae_defconfig : passed 2:35.03 cubie arm-sunxi_defconfig : passed 0:52.55 cubie arm-multi_v7_defconfig : passed 0:55.30 cubie2 arm-sunxi_defconfig : passed 0:57.27 cubie2 arm-multi_v7_defconfig : passed 0:53.43 cubie2 arm-multi_lpae_defconfig : passed 0:53.72 cubox arm-multi_v7_defconfig : passed 1:09.24 cubox arm-mvebu_v7_defconfig : passed 1:15.05 hummingboard arm-imx_v6_v7_defconfig : passed 1:30.44 hummingboard arm-multi_v7_defconfig : passed 1:19.09 jetsontk1 arm-tegra_defconfig : passed 1:36.95 jetsontk1 arm-multi_v7_defconfig : passed 1:38.11 jetsontk1 arm-multi_lpae_defconfig : passed 1:38.14 pandaes arm-omap2plus_defconfig : warnings 1:39.47 pandaes arm-multi_v7_defconfig : passed 1:47.90 pi arm-exynos_defconfig : passed 2:12.89 pi arm-multi_lpae_defconfig : passed 2:20.87 pit arm-exynos_defconfig : passed 2:13.57 pit arm-multi_v7_defconfig : passed 2:13.31 pit arm-multi_lpae_defconfig : passed 2:12.46 seattle arm64-defconfig : warnings 2:27.58 snow arm-exynos_defconfig : passed 2:13.02 snow arm-multi_v7_defconfig : passed 1:59.68 snow arm-multi_lpae_defconfig : passed 2:00.55 trimslice arm-tegra_defconfig : passed 2:41.55 trimslice arm-multi_v7_defconfig : passed 1:33.24 wandboard arm-imx_v6_v7_defconfig : passed 1:25.03 wandboard arm-multi_v7_defconfig : passed 1:23.79
Offline boards:
beaver arm-tegra_defconfig : OFFLINE 2:14.86 beaver arm-multi_v7_defconfig : OFFLINE 2:20.60 colibri-vf61 arm-imx_v6_v7_defconfig : OFFLINE 2:13.99 colibri-vf61 arm-multi_v7_defconfig : OFFLINE 2:17.93 parallella arm-multi_v7_defconfig : OFFLINE 2:20.11 pi arm-multi_v7_defconfig : OFFLINE 1:58.72 rk3288evb arm-multi_v7_defconfig : OFFLINE 0:43.74 rk3288evb arm-multi_lpae_defconfig : OFFLINE 0:44.47 sama5 arm-sama5_defconfig : OFFLINE 2:22.27 sama5d3-xplained arm-sama5_defconfig : OFFLINE 2:15.11 seaboard arm-tegra_defconfig : OFFLINE 2:18.19 seaboard arm-multi_v7_defconfig : OFFLINE 2:15.02 socfpga arm-socfpga_defconfig : OFFLINE 2:25.55 socfpga arm-multi_v7_defconfig : OFFLINE 2:17.54
Board legend is available at http://arm-soc.lixom.net/boards.html
Board bbb-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.558182] omap_hsmmc 48060000.mmc: Got CD GPIO [ 1.623874] Synopsys Designware Multimedia Card Interface Driver [ 1.631687] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.641837] ledtrig-cpu: registered to indicate activity on CPUs [ 1.648923] usbcore: registered new interface driver usbhid [ 1.654850] usbhid: USB HID core driver [ 1.666749] NET: Registered protocol family 10 [ 1.673333] sit: IPv6 over IPv4 tunneling driver [ 1.679475] NET: Registered protocol family 17 [ 1.684244] can: controller area network core (rev 20120528 abi 9) [ 1.690879] NET: Registered protocol family 29 [ 1.695599] can: raw protocol (rev 20120528) [ 1.700119] can: broadcast manager protocol (rev 20120528 t) [ 1.706124] can: netlink gateway (rev 20130117) max_hops=1 [ 1.712872] Key type dns_resolver registered [ 1.717768] omap_voltage_late_init: Voltage driver support not added [ 1.724752] ThumbEE CPU extension supported. [ 1.729317] Registering SWP/SWPB emulation handler [ 1.773934] tps65217 0-0024: TPS65217 ID 0xe version 1.2 [ 1.780468] at24 0-0050: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.788211] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 1.796894] at24 2-0054: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.804806] at24 2-0055: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.812695] at24 2-0056: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.820501] at24 2-0057: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.827852] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz [ 1.834985] hctosys: unable to open rtc device (rtc0) [ 1.848464] Waiting for root device /dev/mmcblk0p2... [ 1.854216] mmc1: new high speed MMC card at address 0001 [ 1.860996] mmcblk1: mmc1:0001 MMC02G 1.79 GiB [ 1.866292] mmcblk1boot0: mmc1:0001 MMC02G partition 1 1.00 MiB [ 1.872944] mmcblk1boot1: mmc1:0001 MMC02G partition 2 1.00 MiB [ 1.881559] mmcblk1: p1 p2
[PYBOOT] [bbb 01:58]: Timed out waiting for "<type 'str'>":
[PYBOOT] [bbb 01:59]: got exception: timeout ~$off
[PYBOOT] [bbb 02:01]: Done. Board bbb-arm-omap2plus_defconfig failure log: -------------------------------------------------
[ 2.070144] omap_hsmmc 481d8000.mmc: lookup for GPIO cd failed [ 2.076275] omap_hsmmc 481d8000.mmc: GPIO lookup for consumer wp [ 2.082613] omap_hsmmc 481d8000.mmc: using device tree for GPIO lookup [ 2.089500] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@481d8000[0]' [ 2.099107] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@481d8000[0]' [ 2.108621] omap_hsmmc 481d8000.mmc: using lookup tables for GPIO lookup [ 2.115648] omap_hsmmc 481d8000.mmc: lookup for GPIO wp failed [ 2.158850] ledtrig-cpu: registered to indicate activity on CPUs [ 2.167587] oprofile: using arm/armv7 [ 2.172719] Initializing XFRM netlink socket [ 2.177821] NET: Registered protocol family 10 [ 2.188886] sit: IPv6 over IPv4 tunneling driver [ 2.197780] NET: Registered protocol family 17 [ 2.202736] NET: Registered protocol family 15 [ 2.208137] Key type dns_resolver registered [ 2.212928] omap_voltage_late_init: Voltage driver support not added [ 2.219686] sr_dev_init: No voltage domain specified for smartreflex0. Cannot initialize [ 2.228239] sr_dev_init: No voltage domain specified for smartreflex1. Cannot initialize [ 2.237798] ThumbEE CPU extension supported. [ 2.242449] Registering SWP/SWPB emulation handler [ 2.247500] SmartReflex Class3 initialized [ 2.319924] mmc1: new high speed MMC card at address 0001 [ 2.332014] tps65217 0-0024: TPS65217 ID 0xe version 1.2 [ 2.339574] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 2.347595] mmcblk1: mmc1:0001 MMC02G 1.79 GiB [ 2.354771] mmcblk1boot0: mmc1:0001 MMC02G partition 1 1.00 MiB [ 2.366822] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz [ 2.374346] mmcblk1boot1: mmc1:0001 MMC02G partition 2 1.00 MiB [ 2.385194] hctosys: unable to open rtc device (rtc0) [ 2.390667] sr_init: No PMIC hook to init smartreflex [ 2.396345] sr_init: platform driver register failed for SR [ 2.440405] mmcblk1: p1 p2 [ 2.458764] Waiting for root device /dev/mmcblk0p2...
[PYBOOT] [bbb 01:51]: Timed out waiting for "<type 'str'>":
[PYBOOT] [bbb 01:52]: got exception: timeout ~$off
[PYBOOT] [bbb 01:53]: Done. Board beagleboard-x15-arm-multi_lpae_defconfig failure log: -------------------------------------------------
[ 1.727274] palmas-rtc 48070000.i2c:tps659038@58:tps659038_rtc: rtc core: registered 48070000.i2c:tps659 as rtc1 [ 1.742041] at24 0-0050: 4096 byte 24c32 EEPROM, writable, 1 bytes/write [ 1.749118] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 1.775874] rtc-ds1307 2-006f: SET TIME! [ 1.781654] rtc-ds1307 2-006f: rtc core: registered mcp7941x as rtc0 [ 1.788409] rtc-ds1307 2-006f: 64 bytes nvram [ 1.793026] omap_i2c 48060000.i2c: bus 2 rev0.12 at 400 kHz [ 1.801252] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 1.807040] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 [ 1.815278] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x00010010 [ 1.824448] xhci-hcd xhci-hcd.0.auto: irq 400, io mem 0x48890000 [ 1.831351] hub 1-0:1.0: USB hub found [ 1.835303] hub 1-0:1.0: 1 port detected [ 1.839725] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 1.845507] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 [ 1.853627] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.862653] hub 2-0:1.0: USB hub found [ 1.866620] hub 2-0:1.0: 1 port detected [ 1.872685] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 1.936868] rtc-ds1307 2-006f: setting system clock to 2001-01-01 00:00:00 UTC (978307200) [ 1.954470] aic_dvdd_fixed: disabling [ 1.959199] Waiting for root device /dev/mmcblk0p1... [ 1.982457] mmc1: new high speed MMC card at address 0001 [ 1.988477] mmcblk1: mmc1:0001 S10004 3.56 GiB [ 1.993387] mmcblk1boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 1.999741] mmcblk1boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 2.006662] mmcblk1: p1 [ 2.145365] usb 1-1: new high-speed USB device number 2 using xhci-hcd [ 2.180395] usb 2-1: new SuperSpeed USB device number 2 using xhci-hcd [ 2.205767] hub 2-1:1.0: USB hub found [ 2.209738] hub 2-1:1.0: 4 ports detected [ 2.301768] hub 1-1:1.0: USB hub found [ 2.305754] hub 1-1:1.0: 4 ports detected
[PYBOOT] [beagleboard-x15 01:50]: Timed out waiting for "<type 'str'>":
[PYBOOT] [beagleboard-x15 01:51]: got exception: timeout ~$off
[PYBOOT] [beagleboard-x15 01:52]: Done. Board beagleboard-x15-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.727127] palmas-rtc 48070000.i2c:tps659038@58:tps659038_rtc: rtc core: registered 48070000.i2c:tps659 as rtc1 [ 1.741888] at24 0-0050: 4096 byte 24c32 EEPROM, writable, 1 bytes/write [ 1.748970] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 1.775800] rtc-ds1307 2-006f: SET TIME! [ 1.781538] rtc-ds1307 2-006f: rtc core: registered mcp7941x as rtc0 [ 1.788299] rtc-ds1307 2-006f: 64 bytes nvram [ 1.792916] omap_i2c 48060000.i2c: bus 2 rev0.12 at 400 kHz [ 1.801119] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 1.806897] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 [ 1.815151] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x00010010 [ 1.824316] xhci-hcd xhci-hcd.0.auto: irq 400, io mem 0x48890000 [ 1.831212] hub 1-0:1.0: USB hub found [ 1.835164] hub 1-0:1.0: 1 port detected [ 1.839552] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 1.845322] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 [ 1.853436] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.862457] hub 2-0:1.0: USB hub found [ 1.866425] hub 2-0:1.0: 1 port detected [ 1.872488] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 1.936873] rtc-ds1307 2-006f: setting system clock to 2001-01-01 00:00:00 UTC (978307200) [ 1.954507] aic_dvdd_fixed: disabling [ 1.960302] Waiting for root device /dev/mmcblk0p1... [ 2.007352] mmc1: new high speed MMC card at address 0001 [ 2.013411] mmcblk1: mmc1:0001 S10004 3.56 GiB [ 2.018324] mmcblk1boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 2.024685] mmcblk1boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 2.031600] mmcblk1: p1 [ 2.145300] usb 1-1: new high-speed USB device number 2 using xhci-hcd [ 2.180327] usb 2-1: new SuperSpeed USB device number 2 using xhci-hcd [ 2.205567] hub 2-1:1.0: USB hub found [ 2.209536] hub 2-1:1.0: 4 ports detected [ 2.301569] hub 1-1:1.0: USB hub found [ 2.305552] hub 1-1:1.0: 4 ports detected
[PYBOOT] [beagleboard-x15 01:42]: Timed out waiting for "<type 'str'>":
[PYBOOT] [beagleboard-x15 01:43]: got exception: timeout ~$off
[PYBOOT] [beagleboard-x15 01:44]: Done. Board beagleboard-x15-arm-omap2plus_defconfig failure log: -------------------------------------------------
[ 2.227498] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer cd [ 2.233796] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 2.240705] of_get_named_gpiod_flags: parsed 'cd-gpios' property of node '/ocp/mmc@4809c000[0]' - status (0) [ 2.251100] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 2.255967] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer wp [ 2.262273] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 2.269145] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@4809c000[0]' [ 2.278754] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@4809c000[0]' [ 2.288255] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 2.295313] omap_hsmmc 4809c000.mmc: lookup for GPIO wp failed [ 2.345441] omap_hsmmc 480b4000.mmc: GPIO lookup for consumer cd [ 2.351741] omap_hsmmc 480b4000.mmc: using device tree for GPIO lookup [ 2.358622] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/ocp/mmc@480b4000[0]' [ 2.368232] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/ocp/mmc@480b4000[0]' [ 2.377726] omap_hsmmc 480b4000.mmc: using lookup tables for GPIO lookup [ 2.384772] omap_hsmmc 480b4000.mmc: lookup for GPIO cd failed [ 2.390902] omap_hsmmc 480b4000.mmc: GPIO lookup for consumer wp [ 2.397211] omap_hsmmc 480b4000.mmc: using device tree for GPIO lookup [ 2.404061] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@480b4000[0]' [ 2.413656] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@480b4000[0]' [ 2.423163] omap_hsmmc 480b4000.mmc: using lookup tables for GPIO lookup [ 2.430212] omap_hsmmc 480b4000.mmc: lookup for GPIO wp failed [ 2.475643] hctosys: unable to open rtc device (rtc0) [ 2.480963] sr_init: No PMIC hook to init smartreflex [ 2.486528] sr_init: platform driver register failed for SR [ 2.533418] aic_dvdd_fixed: disabling [ 2.537667] ldousb: disabling [ 2.542017] mmc1: new high speed MMC card at address 0001 [ 2.550105] mmcblk1: mmc1:0001 S10004 3.56 GiB [ 2.555573] mmcblk1boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 2.562389] mmcblk1boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 2.570885] mmcblk1: p1 [ 2.578616] Waiting for root device /dev/mmcblk0p1...
[PYBOOT] [beagleboard-x15 01:41]: Timed out waiting for "<type 'str'>":
[PYBOOT] [beagleboard-x15 01:42]: got exception: timeout ~$off
[PYBOOT] [beagleboard-x15 01:43]: Done. Board cosmic-arm-imx_v6_v7_defconfig failure log: -------------------------------------------------
[ 14.459288] blk_update_request: I/O error, dev mmcblk0, sector 3633185 [ 18.533528] mmcblk0: error -110 transferring data, sector 3633186, nr 230, cmd response 0x900, card status 0x0 [ 18.543851] blk_update_request: I/O error, dev mmcblk0, sector 3633186 [ 22.618075] mmcblk0: error -110 transferring data, sector 3633187, nr 229, cmd response 0x900, card status 0x0 [ 22.628401] blk_update_request: I/O error, dev mmcblk0, sector 3633187 [ 26.702577] mmcblk0: error -110 transferring data, sector 3633188, nr 228, cmd response 0x900, card status 0x0 [ 26.712908] blk_update_request: I/O error, dev mmcblk0, sector 3633188 [ 30.787137] mmcblk0: error -110 transferring data, sector 3633189, nr 227, cmd response 0x900, card status 0x0 [ 30.797468] blk_update_request: I/O error, dev mmcblk0, sector 3633189 [ 34.871654] mmcblk0: error -110 transferring data, sector 3633190, nr 226, cmd response 0x900, card status 0x0 [ 34.881989] blk_update_request: I/O error, dev mmcblk0, sector 3633190 [ 38.956209] mmcblk0: error -110 transferring data, sector 3633191, nr 225, cmd response 0x900, card status 0x0 [ 38.966541] blk_update_request: I/O error, dev mmcblk0, sector 3633191 [ 43.040739] mmcblk0: error -110 transferring data, sector 3633192, nr 224, cmd response 0x900, card status 0x0 [ 43.051103] blk_update_request: I/O error, dev mmcblk0, sector 3633192 [ 47.125351] mmcblk0: error -110 transferring data, sector 3633193, nr 223, cmd response 0x900, card status 0x0 [ 47.135675] blk_update_request: I/O error, dev mmcblk0, sector 3633193 [ 51.209846] mmcblk0: error -110 transferring data, sector 3633194, nr 222, cmd response 0x900, card status 0x0 [ 51.220168] blk_update_request: I/O error, dev mmcblk0, sector 3633194 [ 55.294400] mmcblk0: error -110 transferring data, sector 3633195, nr 221, cmd response 0x900, card status 0x0 [ 55.304748] blk_update_request: I/O error, dev mmcblk0, sector 3633195 [ 59.378989] mmcblk0: error -110 transferring data, sector 3633196, nr 220, cmd response 0x900, card status 0x0 [ 59.389310] blk_update_request: I/O error, dev mmcblk0, sector 3633196 [ 63.463539] mmcblk0: error -110 transferring data, sector 3633197, nr 219, cmd response 0x900, card status 0x0 [ 63.473866] blk_update_request: I/O error, dev mmcblk0, sector 3633197 [ 67.548088] mmcblk0: error -110 transferring data, sector 3633198, nr 218, cmd response 0x900, card status 0x0 [ 67.558409] blk_update_request: I/O error, dev mmcblk0, sector 3633198 [ 71.632584] mmcblk0: error -110 transferring data, sector 3633199, nr 217, cmd response 0x900, card status 0x0 [ 71.642912] blk_update_request: I/O error, dev mmcblk0, sector 3633199 [ 75.717142] mmcblk0: error -110 transferring data, sector 3633200, nr 216, cmd response 0x900, card status 0x0 [ 75.727466] blk_update_request: I/O error, dev mmcblk0, sector 3633200 [ 79.801630] mmcblk0: error -110 transferring data, sector 3633201, nr 215, cmd response 0x900, card status 0x0 [ 79.811960] blk_update_request: I/O error, dev mmcblk0, sector 3633201
[PYBOOT] [cosmic 01:58]: Timed out waiting for "<type 'str'>":
[PYBOOT] [cosmic 01:59]: got exception: timeout ~$off
[PYBOOT] [cosmic 02:01]: Done. Board cosmic-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 14.081154] blk_update_request: I/O error, dev mmcblk0, sector 3633185 [ 18.155132] mmcblk0: error -110 transferring data, sector 3633186, nr 230, cmd response 0x900, card status 0x0 [ 18.165239] blk_update_request: I/O error, dev mmcblk0, sector 3633186 [ 22.239216] mmcblk0: error -110 transferring data, sector 3633187, nr 229, cmd response 0x900, card status 0x0 [ 22.249292] blk_update_request: I/O error, dev mmcblk0, sector 3633187 [ 26.323282] mmcblk0: error -110 transferring data, sector 3633188, nr 228, cmd response 0x900, card status 0x0 [ 26.333361] blk_update_request: I/O error, dev mmcblk0, sector 3633188 [ 30.407343] mmcblk0: error -110 transferring data, sector 3633189, nr 227, cmd response 0x900, card status 0x0 [ 30.417419] blk_update_request: I/O error, dev mmcblk0, sector 3633189 [ 34.491405] mmcblk0: error -110 transferring data, sector 3633190, nr 226, cmd response 0x900, card status 0x0 [ 34.501489] blk_update_request: I/O error, dev mmcblk0, sector 3633190 [ 38.575473] mmcblk0: error -110 transferring data, sector 3633191, nr 225, cmd response 0x900, card status 0x0 [ 38.585544] blk_update_request: I/O error, dev mmcblk0, sector 3633191 [ 42.659524] mmcblk0: error -110 transferring data, sector 3633192, nr 224, cmd response 0x900, card status 0x0 [ 42.669596] blk_update_request: I/O error, dev mmcblk0, sector 3633192 [ 46.743581] mmcblk0: error -110 transferring data, sector 3633193, nr 223, cmd response 0x900, card status 0x0 [ 46.753654] blk_update_request: I/O error, dev mmcblk0, sector 3633193 [ 50.827640] mmcblk0: error -110 transferring data, sector 3633194, nr 222, cmd response 0x900, card status 0x0 [ 50.837714] blk_update_request: I/O error, dev mmcblk0, sector 3633194 [ 54.911700] mmcblk0: error -110 transferring data, sector 3633195, nr 221, cmd response 0x900, card status 0x0 [ 54.921775] blk_update_request: I/O error, dev mmcblk0, sector 3633195 [ 58.995755] mmcblk0: error -110 transferring data, sector 3633196, nr 220, cmd response 0x900, card status 0x0 [ 59.005825] blk_update_request: I/O error, dev mmcblk0, sector 3633196 [ 63.079805] mmcblk0: error -110 transferring data, sector 3633197, nr 219, cmd response 0x900, card status 0x0 [ 63.089876] blk_update_request: I/O error, dev mmcblk0, sector 3633197 [ 67.163858] mmcblk0: error -110 transferring data, sector 3633198, nr 218, cmd response 0x900, card status 0x0 [ 67.173939] blk_update_request: I/O error, dev mmcblk0, sector 3633198 [ 71.247922] mmcblk0: error -110 transferring data, sector 3633199, nr 217, cmd response 0x900, card status 0x0 [ 71.257997] blk_update_request: I/O error, dev mmcblk0, sector 3633199 [ 75.331987] mmcblk0: error -110 transferring data, sector 3633200, nr 216, cmd response 0x900, card status 0x0 [ 75.342066] blk_update_request: I/O error, dev mmcblk0, sector 3633200 [ 79.416049] mmcblk0: error -110 transferring data, sector 3633201, nr 215, cmd response 0x900, card status 0x0 [ 79.426125] blk_update_request: I/O error, dev mmcblk0, sector 3633201
[PYBOOT] [cosmic 02:03]: Timed out waiting for "<type 'str'>":
[PYBOOT] [cosmic 02:04]: got exception: timeout ~$off
[PYBOOT] [cosmic 02:06]: Done. Board dalmore-arm-multi_lpae_defconfig failure log: -------------------------------------------------
[ 2.636445] can: netlink gateway (rev 20130117) max_hops=1 [ 2.643723] Key type dns_resolver registered [ 2.650230] ThumbEE CPU extension supported. [ 2.654663] Registering SWP/SWPB emulation handler [ 2.673635] usb1_vbus: supplied by vdd-sys-5v0 [ 2.697167] usb2_vbus: supplied by vdd-sys-5v0 [ 2.712900] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 2.735333] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.742188] [drm] No driver support for vblank timestamp query. [ 2.773877] mmc1: new high speed MMC card at address 0001 [ 2.784243] mmcblk1: mmc1:0001 SEM32G 29.1 GiB [ 2.791317] mmcblk1boot0: mmc1:0001 SEM32G partition 1 4.00 MiB [ 2.799570] mmcblk1boot1: mmc1:0001 SEM32G partition 2 4.00 MiB [ 2.806569] mmcblk1rpmb: mmc1:0001 SEM32G partition 3 4.00 MiB [ 2.816544] mmcblk1: p1 [ 2.924655] Console: switching to colour frame buffer device 240x75 [ 3.011428] drm drm: fb0: frame buffer device [ 3.032732] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.047591] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.053190] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 3.062005] tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 [ 3.077768] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 3.088100] hub 1-0:1.0: USB hub found [ 3.092200] hub 1-0:1.0: 1 port detected [ 3.103148] input: gpio-keys as /devices/soc0/gpio-keys/input/input0 [ 3.117228] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 3.179139] dvdd_ts: disabling [ 3.182239] usb1_vbus: disabling [ 3.185616] vdd_cam_1v8_reg: disabling [ 3.193193] Waiting for root device /dev/mmcblk0p1... [ 3.402773] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 4.363741] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f [ 62.312734] random: nonblocking pool is initialized
[PYBOOT] [dalmore 01:51]: Timed out waiting for "<type 'str'>":
[PYBOOT] [dalmore 01:52]: got exception: timeout ~$off
[PYBOOT] [dalmore 01:53]: Done. Board dalmore-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 2.632678] can: broadcast manager protocol (rev 20120528 t) [ 2.638476] can: netlink gateway (rev 20130117) max_hops=1 [ 2.645544] Key type dns_resolver registered [ 2.652071] ThumbEE CPU extension supported. [ 2.656501] Registering SWP/SWPB emulation handler [ 2.687999] usb1_vbus: supplied by vdd-sys-5v0 [ 2.697916] usb2_vbus: supplied by vdd-sys-5v0 [ 2.712898] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 2.735848] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.742671] [drm] No driver support for vblank timestamp query. [ 2.743286] mmc1: new high speed MMC card at address 0001 [ 2.746430] mmcblk1: mmc1:0001 SEM32G 29.1 GiB [ 2.750609] mmcblk1boot0: mmc1:0001 SEM32G partition 1 4.00 MiB [ 2.753831] mmcblk1boot1: mmc1:0001 SEM32G partition 2 4.00 MiB [ 2.756248] mmcblk1rpmb: mmc1:0001 SEM32G partition 3 4.00 MiB [ 2.764935] mmcblk1: p1 [ 2.942685] Console: switching to colour frame buffer device 240x75 [ 3.029137] drm drm: fb0: frame buffer device [ 3.047877] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.061786] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.067369] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 3.077364] tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 [ 3.092826] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 3.102155] hub 1-0:1.0: USB hub found [ 3.106209] hub 1-0:1.0: 1 port detected [ 3.115516] input: gpio-keys as /devices/soc0/gpio-keys/input/input0 [ 3.127423] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 3.182227] dvdd_ts: disabling [ 3.185435] usb1_vbus: disabling [ 3.188749] vdd_cam_1v8_reg: disabling [ 3.196093] Waiting for root device /dev/mmcblk0p1... [ 3.417824] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 4.373706] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f
[PYBOOT] [dalmore 01:56]: Timed out waiting for "<type 'str'>":
[PYBOOT] [dalmore 01:57]: got exception: timeout ~$off
[PYBOOT] [dalmore 01:58]: Done. Board dalmore-arm-tegra_defconfig failure log: -------------------------------------------------
[ 2.898726] Bluetooth: RFCOMM socket layer initialized [ 2.903939] Bluetooth: RFCOMM ver 1.11 [ 2.907894] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 2.913288] Bluetooth: BNEP socket layer initialized [ 2.918652] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 2.924656] Bluetooth: HIDP socket layer initialized [ 2.931095] Key type dns_resolver registered [ 2.940634] Registering SWP/SWPB emulation handler [ 2.966503] usb1_vbus: supplied by vdd-sys-5v0 [ 2.975913] usb2_vbus: supplied by vdd-sys-5v0 [ 2.993725] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 3.024127] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.030936] [drm] No driver support for vblank timestamp query. [ 3.208795] Console: switching to colour frame buffer device 240x75 [ 3.295939] drm drm: fb0: frame buffer device [ 3.327909] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.337140] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.342989] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 3.353221] tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 [ 3.377944] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 3.391926] hub 1-0:1.0: USB hub found [ 3.395962] hub 1-0:1.0: 1 port detected [ 3.409698] input: gpio-keys as /devices/soc0/gpio-keys/input/input1 [ 3.424870] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:01 UTC (946684801) [ 3.513631] dvdd_ts: disabling [ 3.516745] usb1_vbus: disabling [ 3.520144] vdd_cam_1v8_reg: disabling [ 3.524807] ALSA device list: [ 3.527968] #0: NVIDIA Tegra Dalmore [ 3.533826] Waiting for root device /dev/mmcblk0p1... [ 3.717942] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 4.762371] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f [ 46.897901] random: nonblocking pool is initialized
[PYBOOT] [dalmore 01:45]: Timed out waiting for "<type 'str'>":
[PYBOOT] [dalmore 01:46]: got exception: timeout ~$off
[PYBOOT] [dalmore 01:47]: Done. Board odroidu3-arm-exynos_defconfig failure log: -------------------------------------------------
[ 1.814332] usb 1-3: new high-speed USB device number 2 using exynos-ehci [ 1.821130] dwmmc_exynos 12550000.mmc: DW MMC controller at irq 107,32 bit host data width,128 deep fifo [ 1.830762] dwmmc_exynos 12550000.mmc: allocated mmc-pwrseq [ 1.862936] dwmmc_exynos 12550000.mmc: 1 slots initialized [ 1.864157] usbcore: registered new interface driver usbhid [ 1.868344] usbhid: USB HID core driver [ 1.879174] NET: Registered protocol family 10 [ 1.879776] sit: IPv6 over IPv4 tunneling driver [ 1.883059] NET: Registered protocol family 17 [ 1.887023] NET: Registered protocol family 15 [ 1.891504] Key type dns_resolver registered [ 1.895819] Registering SWP/SWPB emulation handler [ 1.906653] s3c-rtc 10070000.rtc: rtc disabled, re-enabling [ 1.906926] s3c-rtc 10070000.rtc: rtc core: registered s3c as rtc1 [ 1.938462] max98090 1-0010: MAX98090 REVID=0x43 [ 1.940717] max98090 1-0010: use default 2.8v micbias [ 1.946638] mmc_host mmc1: Bus speed (slot 0) = 44000000Hz (slot req 52000000Hz, actual 44000000HZ div = 0) [ 1.952348] mmc_host mmc1: Bus speed (slot 0) = 73333333Hz (slot req 52000000Hz, actual 36666666HZ div = 1) [ 1.963180] asoc-simple-card sound: HiFi <-> 3830000.i2s mapping ok [ 1.968453] mmc1: new DDR MMC card at address 0001 [ 1.973686] mmcblk1: mmc1:0001 008G92 7.28 GiB [ 1.978651] input: gpio_keys as /devices/platform/gpio_keys/input/input0 [ 1.984521] mmcblk1boot0: mmc1:0001 008G92 partition 1 4.00 MiB [ 1.995294] mmcblk1boot1: mmc1:0001 008G92 partition 2 4.00 MiB [ 1.996107] mmcblk1rpmb: mmc1:0001 008G92 partition 3 512 KiB [ 2.002626] mmcblk1: p1 p2 [ 2.022929] max77686-rtc max77686-rtc: setting system clock to 2000-01-01 01:00:19 UTC (946688419) [ 2.040955] VDD10_HDMI_1.0V: disabling [ 2.041652] vdd_g3d: disabling [ 2.042722] BUCK8_2.8V: disabling [ 2.046727] ALSA device list: [ 2.048366] #0: Odroid-U3 [ 2.052054] Waiting for root device /dev/mmcblk0p2...
[PYBOOT] [odroidu3 01:45]: Timed out waiting for "<type 'str'>":
[PYBOOT] [odroidu3 01:46]: got exception: timeout ~$off
[PYBOOT] [odroidu3 01:47]: Done. Board omap5uevm-arm-multi_lpae_defconfig failure log: -------------------------------------------------
[ 1.936296] mmcblk0: mmc0:0001 SEM04G 3.69 GiB [ 1.941200] mmcblk0boot0: mmc0:0001 SEM04G partition 1 2.00 MiB [ 1.947573] mmcblk0boot1: mmc0:0001 SEM04G partition 2 2.00 MiB [ 1.955191] smps6: Bringing 1350000uV into 1200000-1200000uV [ 1.965393] smps9: Bringing 0uV into 2100000-2100000uV [ 1.973538] ldo1: Bringing 0uV into 1800000-1800000uV [ 1.980091] ldo2: Bringing 0uV into 2800000-2800000uV [ 1.988106] ldo4: Bringing 0uV into 1800000-1800000uV [ 1.999221] ldo7: Bringing 0uV into 2000000-2000000uV [ 2.007213] smsc95xx v1.0.4 [ 2.010317] ldo9: bypassed regulator has no supply! [ 2.015448] ldo9: failed to get the current voltage(-517) [ 2.021115] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 2.036354] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 2.060159] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 2.063863] smsc95xx 1-3:1.0 eth0: register 'smsc95xx' at usb-4a064c00.ehci-3, smsc95xx USB 2.0 Ethernet, ca:74:d4:d1:79:7b [ 2.078236] omap-dwc3 4a020000.omap_dwc3: vbus init failed [ 2.108183] smps9: Bringing 0uV into 2100000-2100000uV [ 2.126972] ldo9: bypassed regulator has no supply! [ 2.132095] ldo9: failed to get the current voltage(-517) [ 2.137760] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 2.152270] palmas-rtc 48070000.i2c:palmas@48:rtc: setting system clock to 2000-01-01 02:29:21 UTC (946693761) [ 2.167900] pbias_mmc_omap5: disabling [ 2.171843] vmmcsdio_fixed: disabling [ 2.176396] Waiting for root device /dev/mmcblk1p2... [ 2.289381] usb 1-2: new high-speed USB device number 3 using ehci-omap [ 2.425270] hub 1-2:1.0: USB hub found [ 2.429287] hub 1-2:1.0: 3 ports detected [ 2.435134] omap-dwc3 4a020000.omap_dwc3: vbus init failed [ 2.463171] smps9: Bringing 0uV into 2100000-2100000uV [ 2.481922] ldo9: bypassed regulator has no supply! [ 2.487038] ldo9: failed to get the current voltage(-517) [ 2.492711] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator
[PYBOOT] [omap5uevm 02:04]: Timed out waiting for "<type 'str'>":
[PYBOOT] [omap5uevm 02:05]: got exception: timeout ~$off
[PYBOOT] [omap5uevm 02:06]: Done. Board omap5uevm-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.944996] mmcblk0boot0: mmc0:0001 SEM04G partition 1 2.00 MiB [ 1.951386] mmcblk0boot1: mmc0:0001 SEM04G partition 2 2.00 MiB [ 1.959888] smps6: Bringing 1350000uV into 1200000-1200000uV [ 1.970224] smps9: Bringing 0uV into 2100000-2100000uV [ 1.978442] ldo1: Bringing 0uV into 1800000-1800000uV [ 1.984995] ldo2: Bringing 0uV into 2800000-2800000uV [ 1.993021] ldo4: Bringing 0uV into 1800000-1800000uV [ 2.004116] ldo7: Bringing 0uV into 2000000-2000000uV [ 2.012272] ldo9: bypassed regulator has no supply! [ 2.017395] ldo9: failed to get the current voltage(-517) [ 2.023069] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 2.025494] smsc95xx v1.0.4 [ 2.041227] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 2.065093] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 2.071476] omap-dwc3 4a020000.omap_dwc3: vbus init failed [ 2.073873] smsc95xx 1-3:1.0 eth0: register 'smsc95xx' at usb-4a064c00.ehci-3, smsc95xx USB 2.0 Ethernet, 32:af:71:de:12:14 [ 2.113109] smps9: Bringing 0uV into 2100000-2100000uV [ 2.131958] ldo9: bypassed regulator has no supply! [ 2.137077] ldo9: failed to get the current voltage(-517) [ 2.142742] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 2.156744] omap-dwc3 4a020000.omap_dwc3: vbus init failed [ 2.163650] palmas-rtc 48070000.i2c:palmas@48:rtc: setting system clock to 2000-01-01 02:26:56 UTC (946693616) [ 2.179320] pbias_mmc_omap5: disabling [ 2.183252] vmmcsdio_fixed: disabling [ 2.187807] Waiting for root device /dev/mmcblk1p2... [ 2.304318] usb 1-2: new high-speed USB device number 3 using ehci-omap [ 2.440171] hub 1-2:1.0: USB hub found [ 2.444175] hub 1-2:1.0: 3 ports detected [ 2.473164] smps9: Bringing 0uV into 2100000-2100000uV [ 2.492008] ldo9: bypassed regulator has no supply! [ 2.497122] ldo9: failed to get the current voltage(-517) [ 2.502786] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 2.516835] omap-dwc3 4a020000.omap_dwc3: vbus init failed
[PYBOOT] [omap5uevm 02:02]: Timed out waiting for "<type 'str'>":
[PYBOOT] [omap5uevm 02:03]: got exception: timeout ~$off
[PYBOOT] [omap5uevm 02:04]: Done. Board omap5uevm-arm-omap2plus_defconfig failure log: -------------------------------------------------
[ 2.442506] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 2.449372] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@4809c000[0]' [ 2.458998] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@4809c000[0]' [ 2.468498] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 2.475551] omap_hsmmc 4809c000.mmc: lookup for GPIO wp failed [ 2.494455] omap_hsmmc 480ad000.mmc: GPIO lookup for consumer wp [ 2.500747] omap_hsmmc 480ad000.mmc: using device tree for GPIO lookup [ 2.507616] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@480ad000[0]' [ 2.517201] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@480ad000[0]' [ 2.526691] omap_hsmmc 480ad000.mmc: using lookup tables for GPIO lookup [ 2.533726] omap_hsmmc 480ad000.mmc: lookup for GPIO wp failed [ 2.554547] smps9: Bringing 0uV into 2100000-2100000uV [ 2.583359] ldo9: bypassed regulator has no supply! [ 2.588490] ldo9: failed to get the current voltage(-517) [ 2.594160] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 2.614021] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer cd [ 2.620321] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 2.627182] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/ocp/mmc@4809c000[0]' [ 2.636770] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/ocp/mmc@4809c000[0]' [ 2.646261] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 2.653293] omap_hsmmc 4809c000.mmc: lookup for GPIO cd failed [ 2.659423] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer wp [ 2.665733] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 2.672578] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@4809c000[0]' [ 2.682169] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@4809c000[0]' [ 2.691666] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 2.698714] omap_hsmmc 4809c000.mmc: lookup for GPIO wp failed [ 2.744753] hctosys: unable to open rtc device (rtc0) [ 2.750053] sr_init: No PMIC hook to init smartreflex [ 2.755554] sr_init: platform driver register failed for SR [ 2.783811] pbias_mmc_omap5: disabling [ 2.787755] vmmcsdio_fixed: disabling [ 2.793965] Waiting for root device /dev/mmcblk1p2...
[PYBOOT] [omap5uevm 02:05]: Timed out waiting for "<type 'str'>":
[PYBOOT] [omap5uevm 02:06]: got exception: timeout ~$off
[PYBOOT] [omap5uevm 02:08]: Done. Board snowball-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.921142] ledtrig-cpu: registered to indicate activity on CPUs [ 1.927581] usbcore: registered new interface driver usbhid [ 1.933166] usbhid: USB HID core driver [ 1.941711] NET: Registered protocol family 10 [ 1.947052] sit: IPv6 over IPv4 tunneling driver [ 1.952270] NET: Registered protocol family 17 [ 1.956756] can: controller area network core (rev 20120528 abi 9) [ 1.963012] NET: Registered protocol family 29 [ 1.967468] can: raw protocol (rev 20120528) [ 1.971740] can: broadcast manager protocol (rev 20120528 t) [ 1.977416] can: netlink gateway (rev 20130117) max_hops=1 [ 1.983428] Key type dns_resolver registered [ 1.987884] ThumbEE CPU extension supported. [ 1.992187] Registering SWP/SWPB emulation handler [ 1.999511] input: gpio_keys as /devices/soc0/gpio_keys/input/input0 [ 2.006286] rtc-pl031 80154000.rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 2.015472] thermal cooling_device0: thermal-cpufreq-0 bind to 0: 0-succeed [ 2.022491] thermal cooling_device0: thermal-cpufreq-0 bind to 1: 0-succeed [ 2.029479] thermal cooling_device0: thermal-cpufreq-0 bind to 2: 0-succeed [ 2.036468] db8500-cpufreq-cooling soc:cpufreq-cooling: Cooling device registered: thermal-cpufreq-0 [ 2.049774] db8500-esram12: disabling [ 2.053558] db8500-esram34: disabling [ 2.057495] V-CSI/DSI: disabling [ 2.060791] mmci-reg: disabling [ 2.064483] uart-pl011 80007000.uart: DMA channel TX dma0chan20 [ 2.070465] uart-pl011 80007000.uart: DMA channel RX dma0chan21 [ 2.076843] Waiting for root device /dev/mmcblk0p4... [ 2.952026] mmc3: new high speed MMC card at address 0001 [ 3.942230] mmcblk3: mmc3:0001 3.53 GiB [ 3.946533] mmcblk3boot0: mmc3:0001 partition 1 2.00 MiB [ 3.952117] mmcblk3boot1: mmc3:0001 partition 2 2.00 MiB [ 3.957733] mmcblk3rpmb: mmc3:0001 partition 3 128 KiB [ 3.964233] mmcblk3: p1 p2 p3 p4
[PYBOOT] [snowball 02:02]: Timed out waiting for "<type 'str'>":
[PYBOOT] [snowball 02:03]: got exception: timeout ~$off
[PYBOOT] [snowball 02:04]: Done. Board snowball-arm-u8500_defconfig failure log: -------------------------------------------------
[ 2.618041] snd-soc-mop500 snd-soc-mop500.0: ab8500-codec-dai.0 <-> ux500-msp-i2s.1 mapping ok [ 2.627960] ux500-msp-i2s ux500-msp-i2s.3: Failed to get DMA channel capabilities, falling back to period counting: -6 [ 2.638671] snd-soc-mop500 snd-soc-mop500.0: ab8500-codec-dai.1 <-> ux500-msp-i2s.3 mapping ok [ 2.661621] NET: Registered protocol family 10 [ 2.677276] sit: IPv6 over IPv4 tunneling driver [ 2.683227] NET: Registered protocol family 17 [ 2.687744] NET: Registered protocol family 35 [ 2.692321] NET: Registered protocol family 37 [ 2.696899] Registering SWP/SWPB emulation handler [ 2.713653] coresight-etm3x 801ae000.ptm: PTM 1.0 initialized [ 2.719909] coresight-etm3x 801af000.ptm: PTM 1.0 initialized [ 2.726745] input: gpio_keys as /devices/soc0/gpio_keys/input/input1 [ 2.733856] ab8500-rtc ab8500-rtc.0: setting system clock to 2000-04-28 20:58:32 UTC (956955512) [ 2.743103] thermal cooling_device0: thermal-cpufreq-0 bind to 0: 0-succeed [ 2.750091] thermal cooling_device0: thermal-cpufreq-0 bind to 1: 0-succeed [ 2.757141] thermal cooling_device0: thermal-cpufreq-0 bind to 2: 0-succeed [ 2.764160] db8500-cpufreq-cooling soc:cpufreq-cooling: Cooling device registered: thermal-cpufreq-0 [ 2.777587] db8500-esram12: disabling [ 2.781372] db8500-esram34: disabling [ 2.785308] V-CSI/DSI: disabling [ 2.788574] mmci-reg: disabling [ 2.791870] ALSA device list: [ 2.794830] #0: MOP500-card [ 2.798156] uart-pl011 80007000.uart: DMA channel TX dma0chan24 [ 2.804138] uart-pl011 80007000.uart: DMA channel RX dma0chan25 [ 2.810394] Waiting for root device /dev/mmcblk0p4... [ 67.160644] random: nonblocking pool is initialized cu: Got hangup signal Connected. cu: waitpid: No child processes
[PYBOOT] [snowball 01:52]: Timed out waiting for "<type 'str'>": Connected.
Disconnected.
[PYBOOT] [snowball 01:53]: got exception: timeout ~$off
[PYBOOT] [snowball 01:54]: Done.