Full logs are available at http://arm-soc.lixom.net/bootlogs/mainline/v4.7-rc2-342-g8714f8f/
Failed boards:
arndale multi_v7_nosmp_defconfig : NO BUILD bbb multi_v7_nosmp_defconfig : NO BUILD beagleboard-x15 multi_v7_nosmp_defconfig : NO BUILD beaver arm-tegra_defconfig : FAILED 1:48.85 beaver arm-multi_v7_defconfig : FAILED 1:54.22 beaver multi_v7_nosmp_defconfig : NO BUILD capri multi_v7_nosmp_defconfig : NO BUILD colibri-vf61 multi_v7_nosmp_defconfig : NO BUILD colombus multi_v7_nosmp_defconfig : NO BUILD cosmic multi_v7_nosmp_defconfig : NO BUILD cubie multi_v7_nosmp_defconfig : NO BUILD cubie2 multi_v7_nosmp_defconfig : NO BUILD cubox multi_v7_nosmp_defconfig : NO BUILD dalmore multi_v7_nosmp_defconfig : NO BUILD hummingboard multi_v7_nosmp_defconfig : NO BUILD jetsontk1 multi_v7_nosmp_defconfig : NO BUILD minnowmax minnowmax_defconfig : NO BUILD odroidu3 arm-exynos_defconfig : FAILED 1:51.55 omap5uevm arm-omap2plus_defconfig : FAILED 2:05.93 omap5uevm arm-multi_v7_defconfig : FAILED 2:08.65 omap5uevm arm-multi_lpae_defconfig : FAILED 2:18.41 omap5uevm multi_v7_nosmp_defconfig : NO BUILD pandaes multi_v7_nosmp_defconfig : NO BUILD parallella multi_v7_nosmp_defconfig : NO BUILD pi arm-multi_v7_defconfig : FAILED 2:00.25 pi arm-multi_lpae_defconfig : FAILED 1:57.64 pi multi_v7_nosmp_defconfig : NO BUILD pit multi_v7_nosmp_defconfig : NO BUILD rk3288evb multi_v7_nosmp_defconfig : NO BUILD seaboard multi_v7_nosmp_defconfig : NO BUILD snow multi_v7_nosmp_defconfig : NO BUILD snowball multi_v7_nosmp_defconfig : NO BUILD socfpga multi_v7_nosmp_defconfig : NO BUILD trimslice multi_v7_nosmp_defconfig : NO BUILD wandboard multi_v7_nosmp_defconfig : NO BUILD
Successful boards:
apc arm-vt8500_v6_v7_defconfig : passed 1:09.88 arndale arm-exynos_defconfig : passed 1:35.82 arndale arm-multi_v7_defconfig : passed 1:30.11 arndale arm-multi_lpae_defconfig : passed 1:25.91 bbb arm-omap2plus_defconfig : passed 1:39.55 bbb arm-multi_v7_defconfig : passed 1:24.63 beagleboard-x15 arm-omap2plus_defconfig : warnings 0:53.46 beagleboard-x15 arm-multi_v7_defconfig : warnings 0:55.72 beagleboard-x15 arm-multi_lpae_defconfig : warnings 1:01.15 capri arm-bcm_defconfig : passed 0:51.53 capri arm-multi_v7_defconfig : passed 0:54.24 chitra powerpc-pasemi_defconfig : passed 2:08.79 chitra powerpc-ppc64_defconfig : passed 2:00.55 colombus arm-sunxi_defconfig : passed 2:21.08 colombus arm-multi_v7_defconfig : passed 2:38.97 colombus arm-multi_lpae_defconfig : passed 2:38.67 cosmic arm-imx_v6_v7_defconfig : passed 3:25.68 cosmic arm-multi_v7_defconfig : passed 2:51.86 cubie arm-sunxi_defconfig : passed 0:50.56 cubie arm-multi_v7_defconfig : passed 0:52.09 cubie2 arm-sunxi_defconfig : passed 0:50.36 cubie2 arm-multi_v7_defconfig : passed 1:07.04 cubie2 arm-multi_lpae_defconfig : passed 0:54.37 cubox arm-multi_v7_defconfig : passed 1:12.81 cubox arm-mvebu_v7_defconfig : passed 1:09.49 dalmore arm-tegra_defconfig : warnings 1:27.46 dalmore arm-multi_v7_defconfig : warnings 1:35.39 dalmore arm-multi_lpae_defconfig : warnings 1:33.33 jetsontk1 arm-tegra_defconfig : warnings 0:53.62 jetsontk1 arm-multi_v7_defconfig : warnings 0:51.90 jetsontk1 arm-multi_lpae_defconfig : warnings 0:59.00 pandaes arm-omap2plus_defconfig : warnings 1:46.25 pandaes arm-multi_v7_defconfig : passed 1:47.48 parallella arm-multi_v7_defconfig : passed 2:50.13 pi arm-exynos_defconfig : passed 2:13.39 pit arm-exynos_defconfig : passed 2:11.29 pit arm-multi_v7_defconfig : passed 2:20.30 pit arm-multi_lpae_defconfig : passed 2:15.94 seaboard arm-tegra_defconfig : warnings 1:05.03 seaboard arm-multi_v7_defconfig : warnings 1:01.80 seattle arm64-defconfig : passed 2:26.09 snow arm-exynos_defconfig : passed 2:11.80 snow arm-multi_v7_defconfig : passed 2:01.57 snow arm-multi_lpae_defconfig : passed 2:00.87 snowball arm-u8500_defconfig : passed 1:24.06 snowball arm-multi_v7_defconfig : passed 1:20.84 trimslice arm-tegra_defconfig : warnings 1:36.93 trimslice arm-multi_v7_defconfig : warnings 3:28.98 wandboard arm-imx_v6_v7_defconfig : passed 1:08.27 wandboard arm-multi_v7_defconfig : passed 1:23.50
Offline boards:
colibri-vf61 arm-imx_v6_v7_defconfig : OFFLINE 1:17.56 colibri-vf61 arm-multi_v7_defconfig : OFFLINE 1:19.19 hummingboard arm-imx_v6_v7_defconfig : OFFLINE 2:19.48 hummingboard arm-multi_v7_defconfig : OFFLINE 2:11.91 rk3288evb arm-multi_v7_defconfig : OFFLINE 0:51.36 rk3288evb arm-multi_lpae_defconfig : OFFLINE 0:48.51 sama5 arm-sama5_defconfig : OFFLINE 2:23.26 sama5d3-xplained arm-sama5_defconfig : OFFLINE 2:15.60 socfpga arm-socfpga_defconfig : OFFLINE 2:17.62 socfpga arm-multi_v7_defconfig : OFFLINE 2:17.42
Board legend is available at http://arm-soc.lixom.net/boards.html
Last entries of failed logs below:
========================================================================
Board beaver-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 3.440098] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt [ 3.446618] pcie_pme 0000:00:01.0:pcie001: service driver pcie_pme loaded [ 3.453564] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 3.459151] r8169 0000:01:00.0: enabling device (0140 -> 0143) [ 3.466154] r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xf09f2000, 02:04:4b:01:60:99, XID 0c900800 IRQ 375 [ 3.476151] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 3.488023] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.494642] [drm] No driver support for vblank timestamp query. [ 3.500582] drm drm: No connectors reported connected with modes [ 3.506597] [drm] Cannot find any crtc or sizes - going 1024x768 [ 3.534075] Console: switching to colour frame buffer device 128x48 [ 3.546158] drm drm: fb0: frame buffer device [ 3.563734] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.574554] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 3.581021] tegra-ehci 7d004000.usb: EHCI Host Controller [ 3.586429] tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1 [ 3.594275] tegra-ehci 7d004000.usb: irq 343, io mem 0x7d004000 [ 3.608744] tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.00 [ 3.615500] hub 1-0:1.0: USB hub found [ 3.619271] hub 1-0:1.0: 1 port detected [ 3.624194] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.629606] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 3.637352] tegra-ehci 7d008000.usb: irq 344, io mem 0x7d008000 [ 3.648737] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.00 [ 3.655704] hub 2-0:1.0: USB hub found [ 3.659479] hub 2-0:1.0: 1 port detected [ 3.667783] tps65910-rtc tps65910-rtc: setting system clock to 2000-01-01 00:00:02 UTC (946684802) [ 3.681541] vdd_sata,avdd_plle: disabling [ 3.686256] usb1_vbus: disabling [ 3.690356] Waiting for root device /dev/mmcblk0p1... [ 3.973742] usb 2-1: new high-speed USB device number 2 using tegra-ehci [ 4.915265] asix 2-1:1.0 eth1: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 58:6d:8f:50:ba:18 [ 77.123742] random: nonblocking pool is initialized
[PYBOOT] [beaver 01:51]: Timed out waiting for "<type 'str'>":
[PYBOOT] [beaver 01:52]: got exception: timeout ~$off
[PYBOOT] [beaver 01:53]: Done.
========================================================================
Board beaver-arm-tegra_defconfig failure log: -------------------------------------------------
[ 6.374194] pcie_pme 0000:00:01.0:pcie001: service driver pcie_pme loaded [ 6.381235] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 6.386835] r8169 0000:01:00.0: enabling device (0140 -> 0143) [ 6.394331] r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xf087e000, 02:04:4b:01:60:99, XID 0c900800 IRQ 375 [ 6.404332] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 6.416939] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 6.423560] [drm] No driver support for vblank timestamp query. [ 6.429564] drm drm: No connectors reported connected with modes [ 6.435573] [drm] Cannot find any crtc or sizes - going 1024x768 [ 6.462693] Console: switching to colour frame buffer device 128x48 [ 6.474508] drm drm: fb0: frame buffer device [ 6.501069] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 6.510362] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 6.516838] tegra-ehci 7d004000.usb: EHCI Host Controller [ 6.522269] tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1 [ 6.530239] tegra-ehci 7d004000.usb: irq 343, io mem 0x7d004000 [ 6.551073] tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.00 [ 6.558967] hub 1-0:1.0: USB hub found [ 6.562748] hub 1-0:1.0: 1 port detected [ 6.567545] tegra-ehci 7d008000.usb: EHCI Host Controller [ 6.572967] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 6.580851] tegra-ehci 7d008000.usb: irq 344, io mem 0x7d008000 [ 6.601068] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.00 [ 6.608824] hub 2-0:1.0: USB hub found [ 6.612602] hub 2-0:1.0: 1 port detected [ 6.620777] tps65910-rtc tps65910-rtc: setting system clock to 2000-01-01 00:00:02 UTC (946684802) [ 6.638886] vdd_sata,avdd_plle: disabling [ 6.643396] usb1_vbus: disabling [ 6.646807] ALSA device list: [ 6.649765] #0: NVIDIA Tegra Beaver [ 6.653985] Waiting for root device /dev/mmcblk0p1... [ 6.931071] usb 2-1: new high-speed USB device number 2 using tegra-ehci [ 7.922607] asix 2-1:1.0 eth1: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 58:6d:8f:50:ba:18
[PYBOOT] [beaver 01:46]: Timed out waiting for "<type 'str'>":
[PYBOOT] [beaver 01:47]: got exception: timeout ~$off
[PYBOOT] [beaver 01:48]: Done.
========================================================================
Board odroidu3-arm-exynos_defconfig failure log: -------------------------------------------------
[ 1.791143] NET: Registered protocol family 10 [ 1.796771] sit: IPv6 over IPv4 tunneling driver [ 1.797242] NET: Registered protocol family 17 [ 1.800179] NET: Registered protocol family 15 [ 1.804662] Key type dns_resolver registered [ 1.809005] Registering SWP/SWPB emulation handler [ 1.816960] [drm] Exynos DRM: using 12c10000.mixer device for DMA mapping operations [ 1.821573] exynos-drm exynos-drm: bound 12c10000.mixer (ops mixer_component_ops) [ 1.828972] exynos-drm exynos-drm: bound 12d00000.hdmi (ops hdmi_component_ops) [ 1.836115] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.842679] [drm] No driver support for vblank timestamp query. [ 1.848596] [drm] Initialized exynos 1.0.0 20110530 on minor 0 [ 1.854939] s3c-rtc 10070000.rtc: rtc disabled, re-enabling [ 1.860146] s3c-rtc 10070000.rtc: rtc core: registered s3c as rtc1 [ 1.867365] mmc_host mmc1: Bus speed (slot 0) = 44000000Hz (slot req 52000000Hz, actual 44000000HZ div = 0) [ 1.876230] mmc_host mmc1: Bus speed (slot 0) = 73333333Hz (slot req 52000000Hz, actual 36666666HZ div = 1) [ 1.885897] mmc1: new DDR MMC card at address 0001 [ 1.890951] mmcblk1: mmc1:0001 008G92 7.28 GiB [ 1.892104] max98090 1-0010: MAX98090 REVID=0x43 [ 1.894377] max98090 1-0010: use default 2.8v micbias [ 1.904943] mmcblk1boot0: mmc1:0001 008G92 partition 1 4.00 MiB [ 1.910618] mmcblk1boot1: mmc1:0001 008G92 partition 2 4.00 MiB [ 1.916614] asoc-simple-card sound: HiFi <-> 3830000.i2s mapping ok [ 1.916743] mmcblk1rpmb: mmc1:0001 008G92 partition 3 512 KiB [ 1.928295] mmcblk1: p1 p2 [ 1.932062] input: gpio_keys as /devices/platform/gpio_keys/input/input0 [ 1.971682] max77686-rtc max77686-rtc: setting system clock to 2000-01-01 01:00:20 UTC (946688420) [ 1.991564] VDD10_HDMI_1.0V: disabling [ 1.992281] vdd_g3d: disabling [ 1.993346] BUCK8_2.8V: disabling [ 1.997378] ALSA device list: [ 1.998955] #0: Odroid-U3 [ 2.002807] Waiting for root device /dev/mmcblk0p2...
[PYBOOT] [odroidu3 01:48]: Timed out waiting for "<type 'str'>":
[PYBOOT] [odroidu3 01:49]: got exception: timeout ~$off
[PYBOOT] [odroidu3 01:51]: Done.
========================================================================
Board omap5uevm-arm-multi_lpae_defconfig failure log: -------------------------------------------------
[ 1.944949] mmc0: new high speed MMC card at address 0001 [ 1.950977] mmcblk0: mmc0:0001 SEM04G 3.69 GiB [ 1.955745] smps9: Bringing 0uV into 2100000-2100000uV [ 1.961246] mmcblk0boot0: mmc0:0001 SEM04G partition 1 2.00 MiB [ 1.967591] mmcblk0boot1: mmc0:0001 SEM04G partition 2 2.00 MiB [ 1.976382] ldo1: Bringing 0uV into 1800000-1800000uV [ 1.982886] ldo2: Bringing 0uV into 2800000-2800000uV [ 1.990888] ldo4: Bringing 0uV into 1800000-1800000uV [ 2.001959] ldo7: Bringing 0uV into 2000000-2000000uV [ 2.009656] smsc95xx v1.0.4 [ 2.012966] ldo9: bypassed regulator has no supply! [ 2.018093] ldo9: failed to get the current voltage(-517) [ 2.023764] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 2.039078] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 2.060407] smsc95xx 1-3:1.0 eth0: register 'smsc95xx' at usb-4a064c00.ehci-3, smsc95xx USB 2.0 Ethernet, a6:93:c3:2c:1f:c8 [ 2.072915] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 2.079339] omap-dwc3 4a020000.omap_dwc3: vbus init failed [ 2.109709] smps9: Bringing 0uV into 2100000-2100000uV [ 2.128473] ldo9: bypassed regulator has no supply! [ 2.133589] ldo9: failed to get the current voltage(-517) [ 2.139252] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 2.153802] palmas-rtc 48070000.i2c:palmas@48:rtc: setting system clock to 2000-01-01 00:37:57 UTC (946687077) [ 2.169669] pbias_mmc_omap5: disabling [ 2.173608] vmmcsdio_fixed: disabling [ 2.178179] Waiting for root device /dev/mmcblk1p2... [ 2.316064] usb 1-2: new high-speed USB device number 3 using ehci-omap [ 2.451950] hub 1-2:1.0: USB hub found [ 2.455968] hub 1-2:1.0: 3 ports detected [ 2.461731] omap-dwc3 4a020000.omap_dwc3: vbus init failed [ 2.489869] smps9: Bringing 0uV into 2100000-2100000uV [ 2.508640] ldo9: bypassed regulator has no supply! [ 2.513765] ldo9: failed to get the current voltage(-517) [ 2.519427] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator
[PYBOOT] [omap5uevm 02:15]: Timed out waiting for "<type 'str'>":
[PYBOOT] [omap5uevm 02:16]: got exception: timeout ~$off
[PYBOOT] [omap5uevm 02:17]: Done.
========================================================================
Board omap5uevm-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.938208] mmc0: new high speed MMC card at address 0001 [ 1.948967] mmcblk0: mmc0:0001 SEM04G 3.69 GiB [ 1.953884] mmcblk0boot0: mmc0:0001 SEM04G partition 1 2.00 MiB [ 1.960245] mmcblk0boot1: mmc0:0001 SEM04G partition 2 2.00 MiB [ 1.970349] smps9: Bringing 0uV into 2100000-2100000uV [ 1.978517] ldo1: Bringing 0uV into 1800000-1800000uV [ 1.985035] ldo2: Bringing 0uV into 2800000-2800000uV [ 1.993065] ldo4: Bringing 0uV into 1800000-1800000uV [ 2.004168] ldo7: Bringing 0uV into 2000000-2000000uV [ 2.011840] smsc95xx v1.0.4 [ 2.015165] ldo9: bypassed regulator has no supply! [ 2.020290] ldo9: failed to get the current voltage(-517) [ 2.025958] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 2.041255] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 2.064258] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 2.067979] smsc95xx 1-3:1.0 eth0: register 'smsc95xx' at usb-4a064c00.ehci-3, smsc95xx USB 2.0 Ethernet, fe:f3:ce:85:b1:e6 [ 2.082352] omap-dwc3 4a020000.omap_dwc3: vbus init failed [ 2.112192] smps9: Bringing 0uV into 2100000-2100000uV [ 2.130912] ldo9: bypassed regulator has no supply! [ 2.136030] ldo9: failed to get the current voltage(-517) [ 2.141694] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 2.156139] palmas-rtc 48070000.i2c:palmas@48:rtc: setting system clock to 2000-01-01 00:35:23 UTC (946686923) [ 2.172010] pbias_mmc_omap5: disabling [ 2.175951] vmmcsdio_fixed: disabling [ 2.180483] Waiting for root device /dev/mmcblk1p2... [ 2.293490] usb 1-2: new high-speed USB device number 3 using ehci-omap [ 2.429402] hub 1-2:1.0: USB hub found [ 2.433406] hub 1-2:1.0: 3 ports detected [ 2.439170] omap-dwc3 4a020000.omap_dwc3: vbus init failed [ 2.467163] smps9: Bringing 0uV into 2100000-2100000uV [ 2.485898] ldo9: bypassed regulator has no supply! [ 2.491018] ldo9: failed to get the current voltage(-517) [ 2.496682] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator
[PYBOOT] [omap5uevm 02:04]: Timed out waiting for "<type 'str'>":
[PYBOOT] [omap5uevm 02:05]: got exception: timeout ~$off
[PYBOOT] [omap5uevm 02:06]: Done.
========================================================================
Board omap5uevm-arm-omap2plus_defconfig failure log: -------------------------------------------------
[ 3.998464] ldo9: bypassed regulator has no supply! [ 4.003599] ldo9: failed to get the current voltage(-517) [ 4.009276] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 4.032204] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 4.039893] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 4.046442] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer cd [ 4.052771] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 4.059637] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/ocp/mmc@4809c000[0]' [ 4.069229] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/ocp/mmc@4809c000[0]' [ 4.078707] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 4.085777] omap_hsmmc 4809c000.mmc: lookup for GPIO cd failed [ 4.091923] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer wp [ 4.098221] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 4.105081] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@4809c000[0]' [ 4.114681] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@4809c000[0]' [ 4.124185] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 4.131227] omap_hsmmc 4809c000.mmc: lookup for GPIO wp failed [ 4.149947] omap_hsmmc 480ad000.mmc: GPIO lookup for consumer wp [ 4.156236] omap_hsmmc 480ad000.mmc: using device tree for GPIO lookup [ 4.163101] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@480ad000[0]' [ 4.172682] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@480ad000[0]' [ 4.182179] omap_hsmmc 480ad000.mmc: using lookup tables for GPIO lookup [ 4.189214] omap_hsmmc 480ad000.mmc: lookup for GPIO wp failed [ 4.210318] smps9: Bringing 0uV into 2100000-2100000uV [ 4.239515] ldo9: bypassed regulator has no supply! [ 4.244627] ldo9: failed to get the current voltage(-517) [ 4.250315] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 4.270440] hctosys: unable to open rtc device (rtc0) [ 4.275734] sr_init: No PMIC hook to init smartreflex [ 4.281243] sr_init: platform driver register failed for SR [ 4.308785] pbias_mmc_omap5: disabling [ 4.312758] vmmcsdio_fixed: disabling [ 4.318859] Waiting for root device /dev/mmcblk1p2...
[PYBOOT] [omap5uevm 02:03]: Timed out waiting for "<type 'str'>":
[PYBOOT] [omap5uevm 02:04]: got exception: timeout ~$off
[PYBOOT] [omap5uevm 02:05]: Done.
========================================================================
Board pi-arm-multi_lpae_defconfig failure log: -------------------------------------------------
[ 1.533377] isl29018 7-0044: No cache defaults, reading back from HW [ 1.539732] isl29018 7-0044: Failed to read 1: -6 [ 1.544316] isl29018 7-0044: regmap initialization fails: -6 [ 1.555217] NET: Registered protocol family 10 [ 1.559646] sit: IPv6 over IPv4 tunneling driver [ 1.563227] NET: Registered protocol family 17 [ 1.567232] can: controller area network core (rev 20120528 abi 9) [ 1.573423] NET: Registered protocol family 29 [ 1.577810] can: raw protocol (rev 20120528) [ 1.582059] can: broadcast manager protocol (rev 20120528 t) [ 1.587702] can: netlink gateway (rev 20130117) max_hops=1 [ 1.593421] Key type dns_resolver registered [ 1.597753] ThumbEE CPU extension supported. [ 1.601670] Registering SWP/SWPB emulation handler [ 1.611565] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.617046] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.623415] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.628790] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 1.638890] input: gpio-keys as /devices/platform/gpio-keys/input/input1 [ 1.649214] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.654654] mmc_host mmc0: Bus speed (slot 0) = 200000000Hz (slot req 200000000Hz, actual 200000000HZ div = 0) [ 1.664842] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.671022] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.676400] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 1.686137] max77686-rtc max77802-rtc: hctosys: unable to read the hardware clock [ 1.708631] Waiting for root device /dev/mmcblk0p1... [ 1.712515] mmc0: tuning execution failed: -5 [ 1.716570] mmc0: error -5 whilst initialising MMC card [ 2.583179] asix 1-1:1.0 eth0: register 'asix' at usb-xhci-hcd.2.auto-1, ASIX AX88772 USB 2.0 Ethernet, c8:b3:73:46:fb:95 [ 2.597306] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 2.602774] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 2.609142] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 2.614526] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo
[PYBOOT] [pi 01:54]: Timed out waiting for "<type 'str'>":
[PYBOOT] [pi 01:55]: got exception: timeout ~$off
[PYBOOT] [pi 01:57]: Done.
========================================================================
Board pi-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.538751] isl29018 7-0044: No cache defaults, reading back from HW [ 1.545105] isl29018 7-0044: Failed to read 1: -6 [ 1.549689] isl29018 7-0044: regmap initialization fails: -6 [ 1.560630] NET: Registered protocol family 10 [ 1.565068] sit: IPv6 over IPv4 tunneling driver [ 1.568645] NET: Registered protocol family 17 [ 1.572648] can: controller area network core (rev 20120528 abi 9) [ 1.578840] NET: Registered protocol family 29 [ 1.583227] can: raw protocol (rev 20120528) [ 1.587476] can: broadcast manager protocol (rev 20120528 t) [ 1.593118] can: netlink gateway (rev 20130117) max_hops=1 [ 1.598841] Key type dns_resolver registered [ 1.603167] ThumbEE CPU extension supported. [ 1.607087] Registering SWP/SWPB emulation handler [ 1.616982] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.622463] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.628833] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.634207] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 1.644310] input: gpio-keys as /devices/platform/gpio-keys/input/input1 [ 1.654684] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.660135] mmc_host mmc0: Bus speed (slot 0) = 200000000Hz (slot req 200000000Hz, actual 200000000HZ div = 0) [ 1.670320] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.676500] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.681878] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 1.691603] max77686-rtc max77802-rtc: hctosys: unable to read the hardware clock [ 1.714260] Waiting for root device /dev/mmcblk0p1... [ 1.718142] mmc0: tuning execution failed: -5 [ 1.722195] mmc0: error -5 whilst initialising MMC card [ 2.583543] asix 1-1:1.0 eth0: register 'asix' at usb-xhci-hcd.2.auto-1, ASIX AX88772 USB 2.0 Ethernet, c8:b3:73:46:fb:95 [ 2.597750] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 2.603206] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 2.609579] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 2.614963] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo
[PYBOOT] [pi 01:55]: Timed out waiting for "<type 'str'>":
[PYBOOT] [pi 01:56]: got exception: timeout ~$off
[PYBOOT] [pi 01:57]: Done.