arndale : passed 0:50.79 bbb : passed 2:00.82 beaver : FAILED 0:43.99 multi-beaver : FAILED 0:42.36 cubie : passed 1:08.25 cubie2 : passed 1:08.94 cubox : FAILED 0:52.20 panda : passed 0:59.49 multi-panda : passed 0:49.27 sama5 : passed 1:52.51 snowball : passed 1:19.93 multi-snowball : passed 0:38.27 multi-trimslice : passed 0:40.25
Board legend:
Board : System SoC Defconfig
arndale : InSignal ArndaleBoard Samsung Exynos 5250 exynos_defconfig bbb : BeagleBone Black TI Sitara AM3359 omap2plus_defconfig beaver : Nvidia Beaver Nvidia Tegra 30 tegra_defconfig multi-beaver : multi_v7_defconfig cubie : Cubieboard Allwinner A10 multi_v7_defconfig cubie2 : Cubieboard 2 Allwinner A20 multi_v7_defconfig cubox : SolidRun Cubox Marvell 88AP510 dove_defconfig multi-trimslice : CompuLab TrimSlice Nvidia Tegra 20 multi_v7_defconfig panda : TI PandaBoard ES TI OMAP4460 omap2plus_defconfig multi-panda : multi_v7_defconfig sama5 : Atmel SAMA5 devboard Atmel SAMA5D35 sama5_defconfig snowball : CALAO Snowball ST-Ericsson A9500 u8500_defconfig multi-snowball : multi_v7_defconfig
Last entries of failed logs below:
========================================================================
Board beaver failure log: -------------------------------------------------
board_name=beaver boot_prefixes=/ /boot/ boot_scripts=boot.scr.uimg boot.scr boot_targets=mmc1 mmc0 usb0 dhcp bootargs=console=ttyS0,115200 earlyprintk debug root=/dev/mmcblk0p1 rootwait bootcmd=for target in ${boot_targets}; do run bootcmd_${target}; done bootcmd_dhcp=run usb_init; if dhcp ${scriptaddr} boot.scr.uimg; then source ${scriptaddr}; fi bootcmd_mmc0=setenv devnum 0; run mmc_boot; bootcmd_mmc1=setenv devnum 1; run mmc_boot; bootcmd_usb0=setenv devnum 0; run usb_boot; bootdelay=2 bootfile=mainline/v3.12-rc2/uImage.tegra30 cpu=armv7 fdt_addr_r=0x82000000 initrd_high=0xffffffff kernel_addr_r=0x81000000 loadaddr=0x80408000 mmc_boot=setenv devtype mmc; if mmc dev ${devnum}; then run scan_boot; fi ramdisk_addr_r=0x82100000 rootpart=1 scan_boot=echo Scanning ${devtype} ${devnum}...; for prefix in ${boot_prefixes}; do for script in ${boot_scripts}; do run script_boot; done; done; script_boot=if load ${devtype} ${devnum}:${rootpart} ${scriptaddr} ${prefix}${script}; then echo ${script} found! Executing ...;source ${scriptaddr};fi; scriptaddr=0x90000000 soc=tegra30 stderr=serial stdin=serial stdout=serial usb_boot=setenv devtype usb; run usb_init; if usb dev ${devnum}; then run scan_boot; fi usb_init=if ${usb_need_init}; then set usb_need_init false; usb start 0; fi vendor=nvidia
Environment size: 1436/8188 bytes Tegra30 (Beaver) # printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 earlyprintk debug root=/dev/mmcblk0p1 rootwait Tegra30 (Beaver) # tftpboot 0x82000000 172.16.1.4:/srv/tftp/mainline/v3.12-rc2/uImage.tegra30 tftpboot 0x82000000 172.16.1.4:/srv/tftp/mainline/v3.12-rc2/uImage.tegra30 No ethernet found. Tegra30 (Beaver) # (user:olof) connected ~$off
========================================================================
Board cubox failure log: -------------------------------------------------
stderr=serial passDramInitTag=yes mainlineLinux=yes enaMonExt=no pexMode=RC disL2Cache=no disL2Ecc=no sata_dma_mode=yes netbsd_en=no vxworks_en=no bootscript=boot.scr loadaddr=0x02000000 mmc_started=0 ide_started=0 usb_started=0 trydev=usb mmc ide trypart=1 2 trydir=/ /boot/ tryfs=ext4 fat bootcmd=for device_name in ${trydev} ; do for partition in ${trypart} ; do for directory in ${trydir} ;do for fstype in ${tryfs}; do echo ===> Executing ${fstype}load ${device_name} 0:${partition} ${loadaddr} ${directory}${bootscript};if itest.s $device_name -eq mmc; then if itest.s $mmc_started -ne 1; then mmcinfo; setenv mmc_started '1';fi;fi;if itest.s $device_name -eq usb; then if itest.s $usb_started -ne 1; then usb start; setenv usb_started '1';fi;fi;if itest.s $device_name -eq ide; then if itest.s $ide_started -ne 1; then ide reset; setenv ide_started '1';fi;fi;if ${fstype}load ${device_name} 0:${partition} ${loadaddr} ${directory}${bootscript}; then source ${loadaddr};fi;if itest.s $device_name -eq usb; then echo ===> Executing ${fstype}load ${device_name} 1:${partition} ${loadaddr} ${directory}${bootscript};if ${fstype}load ${device_name} 1:${partition} ${loadaddr} ${directory}${bootscript}; then source ${loadaddr};fi;fi;done;done;done;done;tftp ${loadaddr} ${bootscript};source ${loadaddr}; enaL2ExtraFeatures=yes enaCpuStream=no enaVpuPower=no enaGpuPower=yes autoload=no bootfile=mainline/v3.12-rc2/uImage.cubox autoboot=no
Environment size: 3949/65532 bytes CuBox>> printenv bootargs printenv bootargs bootargs=console=ttyS0,115200n8 root=/dev/mmcblk0p2 rootwait CuBox>> tftpboot 0x2000000 172.16.1.4:/srv/tftp/mainline/v3.12-rc2/uImage.cubox tftpboot 0x2000000 172.16.1.4:/srv/tftp/mainline/v3.12-rc2/uImage.cubox egiga0 no link Using egiga0 device TFTP from server 172.16.1.4; our IP address is 172.16.1.183 Filename '/srv/tftp/mainline/v3.12-rc2/uImage.cubox'. Load address: 0x2000000 Loading: *T T T T T ~$off
========================================================================
Board multi-beaver failure log: -------------------------------------------------
board=beaver board_name=beaver boot_prefixes=/ /boot/ boot_scripts=boot.scr.uimg boot.scr boot_targets=mmc1 mmc0 usb0 dhcp bootargs=console=ttyS0,115200 earlyprintk debug root=/dev/mmcblk0p1 rootwait bootcmd=for target in ${boot_targets}; do run bootcmd_${target}; done bootcmd_dhcp=run usb_init; if dhcp ${scriptaddr} boot.scr.uimg; then source ${scriptaddr}; fi bootcmd_mmc0=setenv devnum 0; run mmc_boot; bootcmd_mmc1=setenv devnum 1; run mmc_boot; bootcmd_usb0=setenv devnum 0; run usb_boot; bootdelay=2 bootfile=mainline/v3.12-rc2/uImage.multi-2g cpu=armv7 fdt_addr_r=0x82000000 initrd_high=0xffffffff kernel_addr_r=0x81000000 loadaddr=0x80408000 mmc_boot=setenv devtype mmc; if mmc dev ${devnum}; then run scan_boot; fi ramdisk_addr_r=0x82100000 rootpart=1 scan_boot=echo Scanning ${devtype} ${devnum}...; for prefix in ${boot_prefixes}; do for script in ${boot_scripts}; do run script_boot; done; done; script_boot=if load ${devtype} ${devnum}:${rootpart} ${scriptaddr} ${prefix}${script}; then echo ${script} found! Executing ...;source ${scriptaddr};fi; scriptaddr=0x90000000 soc=tegra30 stderr=serial stdin=serial stdout=serial usb_boot=setenv devtype usb; run usb_init; if usb dev ${devnum}; then run scan_boot; fi usb_init=if ${usb_need_init}; then set usb_need_init false; usb start 0; fi vendor=nvidia
Environment size: 1437/8188 bytes Tegra30 (Beaver) # printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 earlyprintk debug root=/dev/mmcblk0p1 rootwait Tegra30 (Beaver) # tftpboot 0x82000000 172.16.1.4:/srv/tftp/mainline/v3.12-rc2/uImage.multi-2g tftpboot 0x82000000 172.16.1.4:/srv/tftp/mainline/v3.12-rc2/uImage.multi-2g No ethernet found. Tegra30 (Beaver) # ~$off