next boot: 28 passed 12 failed (next/next-20140613)

Failed boards:

beaver multi_v7_defconfig : FAILED 1:27.76 capri bcm_defconfig : FAILED 1:24.72 capri multi_v7_defconfig : FAILED 1:24.69 cubox multi_v7_defconfig : FAILED 1:31.86 dalmore multi_v7_defconfig : FAILED 1:34.12 dalmore multi_lpae_defconfig : FAILED 1:30.63 hummingboard multi_v7_defconfig : FAILED 1:26.67 jetson multi_v7_defconfig : FAILED 1:25.80 sama5 sama5_defconfig : FAILED 3:02.07 seaboard multi_v7_defconfig : FAILED 0:37.64 snowball u8500_defconfig : FAILED 1:51.66 wandboard multi_v7_defconfig : FAILED 1:37.87

Successful boards:

apc vt8500_v6_v7_defconfig : passed 1:14.95 arndale exynos_defconfig : passed 1:22.04 arndale multi_v7_defconfig : passed 1:37.71 arndale multi_lpae_defconfig : passed 1:29.27 bbb omap2plus_defconfig : passed 1:29.14 bbb multi_v7_defconfig : passed 1:28.83 beaver tegra_defconfig : passed 1:02.29 cubie sunxi_defconfig : passed 1:10.41 cubie multi_v7_defconfig : passed 1:18.97 cubie2 sunxi_defconfig : passed 1:27.59 cubie2 multi_v7_defconfig : passed 1:22.92 cubie2 multi_lpae_defconfig : passed 1:05.51 dalmore tegra_defconfig : passed 1:23.02 hummingboard imx_v6_v7_defconfig : passed 1:32.93 jetson tegra_defconfig : passed 3:53.79 omap5uevm omap2plus_defconfig : warnings 1:00.71 omap5uevm multi_v7_defconfig : warnings 2:00.02 omap5uevm multi_lpae_defconfig : warnings 1:54.77 panda omap2plus_defconfig : warnings 1:35.42 panda multi_v7_defconfig : warnings 1:52.54 seaboard tegra_defconfig : passed 1:06.00 snow exynos_defconfig : passed 0:58.92 snow multi_v7_defconfig : passed 1:00.19 snow multi_lpae_defconfig : passed 1:00.42 snowball multi_v7_defconfig : passed 5:09.07 trimslice tegra_defconfig : passed 3:59.24 trimslice multi_v7_defconfig : passed 3:59.44 wandboard imx_v6_v7_defconfig : passed 1:10.61

Offline boards:

jetson multi_lpae_defconfig : OFFLINE 1:42.97

Board legend is available at http://arm-soc.lixom.net/boards.html

Last entries of failed logs below:

========================================================================

Board beaver-multi_v7_defconfig failure log: -------------------------------------------------

[ 3.571477] pci 0000:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 3.577564] pci 0000:00:01.0: PCI bridge to [bus 01] [ 3.582522] pci 0000:00:01.0: bridge window [io 0x1000-0x1fff] [ 3.588608] pci 0000:00:01.0: bridge window [mem 0x28000000-0x280fffff 64bit pref] [ 3.596351] pci 0000:00:01.0: nv_msi_ht_cap_quirk didn't locate host bridge [ 3.603451] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 3.609041] r8169 0000:01:00.0: enabling device (0140 -> 0143) [ 3.615396] r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xf001e000, 02:04:4b:01:60:99, XID 0c900800 IRQ 472 [ 3.625393] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 3.635860] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.642492] [drm] No driver support for vblank timestamp query. [ 3.648442] host1x drm: No connectors reported connected with modes [ 3.654706] [drm] Cannot find any crtc or sizes - going 1024x768 [ 3.678258] Console: switching to colour frame buffer device 128x48 [ 3.689978] host1x drm: fb0: frame buffer device [ 3.694675] host1x drm: registered panic notifier [ 3.713606] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.719881] platform 7d004000.usb: Driver tegra-ehci requests probe deferral [ 3.727334] platform 7d008000.usb: Driver tegra-ehci requests probe deferral [ 3.738821] tegra-ehci 7d004000.usb: EHCI Host Controller [ 3.744227] tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1 [ 3.752038] tegra-ehci 7d004000.usb: irq 53, io mem 0x7d004000 [ 3.763212] tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.00 [ 3.769566] hub 1-0:1.0: USB hub found [ 3.773343] hub 1-0:1.0: 1 port detected [ 3.777708] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.783120] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 3.790851] tegra-ehci 7d008000.usb: irq 129, io mem 0x7d008000 [ 3.803596] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.00 [ 3.809892] hub 2-0:1.0: USB hub found [ 3.813664] hub 2-0:1.0: 1 port detected [ 3.821549] tps65910-rtc tps65910-rtc: setting system clock to 2000-01-01 00:00:02 UTC (946684802) [ 3.834381] usb1_vbus: disabling [ 3.837786] ALSA device list: [ 3.840768] #0: NVIDIA Tegra Beaver [ 3.845001] Waiting for root device /dev/mmcblk0p1... [ 4.123622] usb 2-1: new high-speed USB device number 2 using tegra-ehci [ 4.592341] asix 2-1:1.0 eth1: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 58:6d:8f:50:ba:18 ~$off # PYBOOT: Exception: timeout

========================================================================

Board capri-bcm_defconfig failure log: -------------------------------------------------

[ 0.460000] iosr1: 1800 mV [ 0.460000] iosr2: at 1800 mV [ 0.470000] msr: at 1120 mV [ 0.470000] sdsr1: at 1240 mV [ 0.470000] sdsr2: at 1240 mV [ 0.480000] vsr: at 1240 mV [ 0.480000] gpldo1: at 1200 mV [ 0.480000] gpldo2: at 3300 mV [ 0.490000] gpldo3: at 1200 mV [ 0.490000] gpldo4: at 1800 mV [ 0.490000] gpldo5: at 1200 mV [ 0.500000] gpldo6: at 3300 mV [ 0.500000] : no parameters [ 0.500000] : Failed to create debugfs directory [ 0.510000] bcm-kona-i2c 3500d000.i2c: device registered successfully [ 0.510000] sdhci: Secure Digital Host Controller Interface driver [ 0.520000] sdhci: Copyright(c) Pierre Ossman [ 0.520000] TCP: cubic registered [ 0.520000] NET: Registered protocol family 10 [ 0.530000] sit: IPv6 over IPv4 tunneling driver [ 0.530000] NET: Registered protocol family 17 [ 0.530000] NET: Registered protocol family 15 [ 0.540000] ThumbEE CPU extension supported. [ 0.540000] gpldo6: disabling [ 0.550000] gpldo5: disabling [ 0.550000] gpldo4: disabling [ 0.550000] gpldo3: disabling [ 0.560000] gpldo2: disabling [ 0.560000] gpldo1: disabling [ 0.560000] vsr: disabling [ 0.570000] sdsr2: disabling [ 0.570000] sdsr1: disabling [ 0.570000] msr: disabling [ 0.580000] iosr2: disabling [ 0.580000] csr: disabling [ 0.580000] mmcldo2: disabling [ 0.590000] mmcldo1: disabling [ 0.590000] Waiting for root device /dev/mmcblk0p8... ~$off # PYBOOT: Exception: timeout

========================================================================

Board capri-multi_v7_defconfig failure log: -------------------------------------------------

[ 0.545000] ehci-omap: OMAP-EHCI Host Controller driver [ 0.550000] ehci-orion: EHCI orion driver [ 0.550000] SPEAr-ehci: EHCI SPEAr driver [ 0.555000] tegra-ehci: Tegra EHCI driver [ 0.555000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.560000] ohci-pci: OHCI PCI platform driver [ 0.560000] ohci-platform: OHCI generic platform driver [ 0.565000] ohci-omap3: OHCI OMAP3 driver [ 0.565000] SPEAr-ohci: OHCI SPEAr driver [ 0.570000] usbcore: registered new interface driver usb-storage [ 0.575000] mousedev: PS/2 mouse device common for all mice [ 0.580000] i2c /dev entries driver [ 0.585000] bcm-kona-i2c 3e016000.i2c: device registered successfully [ 0.590000] bcm-kona-i2c 3e017000.i2c: device registered successfully [ 0.595000] bcm-kona-i2c 3e018000.i2c: device registered successfully [ 0.600000] bcm-kona-i2c 3500d000.i2c: device registered successfully [ 0.605000] usbcore: registered new interface driver uvcvideo [ 0.610000] USB Video Class driver (1.1.1) [ 0.610000] gspca_main: v2.14.0 registered [ 0.615000] sdhci: Secure Digital Host Controller Interface driver [ 0.620000] sdhci: Copyright(c) Pierre Ossman [ 0.620000] Synopsys Designware Multimedia Card Interface Driver [ 0.625000] usbcore: registered new interface driver usbhid [ 0.630000] usbhid: USB HID core driver [ 0.635000] TCP: cubic registered [ 0.635000] NET: Registered protocol family 17 [ 0.640000] can: controller area network core (rev 20120528 abi 9) [ 0.645000] NET: Registered protocol family 29 [ 0.645000] can: raw protocol (rev 20120528) [ 0.650000] can: broadcast manager protocol (rev 20120528 t) [ 0.655000] can: netlink gateway (rev 20130117) max_hops=1 [ 0.660000] Key type dns_resolver registered [ 0.660000] ThumbEE CPU extension supported. [ 0.665000] Registering SWP/SWPB emulation handler [ 0.670000] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 0.675000] ALSA device list: [ 0.675000] No soundcards found. [ 0.680000] Waiting for root device /dev/mmcblk0p8... ~$off # PYBOOT: Exception: timeout

========================================================================

Board cubox-multi_v7_defconfig failure log: -------------------------------------------------

[ 1.226254] hub 2-0:1.0: 1 port detected [ 1.230627] SPEAr-ehci: EHCI SPEAr driver [ 1.234739] tegra-ehci: Tegra EHCI driver [ 1.238868] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.245050] ohci-pci: OHCI PCI platform driver [ 1.249558] ohci-platform: OHCI generic platform driver [ 1.254881] ohci-omap3: OHCI OMAP3 driver [ 1.258986] SPEAr-ohci: OHCI SPEAr driver [ 1.263734] usbcore: registered new interface driver usb-storage [ 1.271291] mousedev: PS/2 mouse device common for all mice [ 1.278310] rtc-mv f10d8500.real-time-clock: rtc core: registered f10d8500.real-time- as rtc0 [ 1.287666] i2c /dev entries driver [ 1.293127] usbcore: registered new interface driver uvcvideo [ 1.298883] USB Video Class driver (1.1.1) [ 1.302974] gspca_main: v2.14.0 registered [ 1.310224] orion_wdt: Initial timeout 25 sec [ 1.315736] sdhci: Secure Digital Host Controller Interface driver [ 1.321900] sdhci: Copyright(c) Pierre Ossman [ 1.326814] Synopsys Designware Multimedia Card Interface Driver [ 1.333502] usbcore: registered new interface driver usbhid [ 1.339059] usbhid: USB HID core driver [ 1.346891] TCP: cubic registered [ 1.350197] NET: Registered protocol family 17 [ 1.354668] can: controller area network core (rev 20120528 abi 9) [ 1.360909] NET: Registered protocol family 29 [ 1.365333] can: raw protocol (rev 20120528) [ 1.369596] can: broadcast manager protocol (rev 20120528 t) [ 1.375250] can: netlink gateway (rev 20130117) max_hops=1 [ 1.381126] Key type dns_resolver registered [ 1.385607] ThumbEE CPU extension supported. [ 1.389875] Registering SWP/SWPB emulation handler [ 1.394665] PJ4 iWMMXt v2 coprocessor enabled. [ 1.399367] ata1: SATA link down (SStatus 0 SControl F300) [ 1.405875] USB Power: 5000 mV [ 1.409401] rtc-mv f10d8500.real-time-clock: setting system clock to 2014-06-14 07:27:30 UTC (1402730850) [ 1.419930] ALSA device list: [ 1.422908] No soundcards found. [ 1.426833] Waiting for root device /dev/mmcblk0p2... ~$off # PYBOOT: Exception: timeout

========================================================================

Board dalmore-multi_lpae_defconfig failure log: -------------------------------------------------

[ 2.965488] i2c 0-004c: Driver lm90 requests probe deferral [ 2.972987] tegra-dsi 54300000.dsi: cannot get VDD supply [ 2.978591] platform 54300000.dsi: Driver tegra-dsi requests probe deferral [ 2.988574] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 2.995033] platform 54280000.hdmi: Driver tegra-hdmi requests probe deferral [ 3.005275] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.010889] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 3.020888] tegra-ehci 7d008000.usb: irq 129, io mem 0x7d008000 [ 3.036865] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 3.046734] hub 1-0:1.0: USB hub found [ 3.050732] hub 1-0:1.0: 1 port detected [ 3.057251] i2c 0-004c: Driver lm90 requests probe deferral [ 3.064792] tegra-dsi 54300000.dsi: cannot get VDD supply [ 3.070426] platform 54300000.dsi: Driver tegra-dsi requests probe deferral [ 3.080402] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 3.086911] platform 54280000.hdmi: Driver tegra-hdmi requests probe deferral [ 3.099035] input: gpio-keys as /devices/soc0/gpio-keys/input/input1 [ 3.107220] i2c 0-004c: Driver lm90 requests probe deferral [ 3.112930] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 3.151151] VDD_5V0_HDMI_CON: disabling [ 3.155168] vdd_cam_1v8_reg: disabling [ 3.159551] vdd_hdmi_5v0: disabling [ 3.163253] usb1_vbus: disabling [ 3.166638] dvdd_ts: disabling [ 3.173955] tegra-dsi 54300000.dsi: cannot get VDD supply [ 3.174636] ALSA device list: [ 3.174652] #0: NVIDIA Tegra Dalmore [ 3.186450] platform 54300000.dsi: Driver tegra-dsi requests probe deferral [ 3.189422] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 3.189657] platform 54280000.hdmi: Driver tegra-hdmi requests probe deferral [ 3.209314] Waiting for root device /dev/mmcblk0p1... [ 3.366948] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 3.850479] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f [ 3.862032] i2c 0-004c: Driver lm90 requests probe deferral [ 3.869556] tegra-dsi 54300000.dsi: cannot get VDD supply [ 3.875195] platform 54300000.dsi: Driver tegra-dsi requests probe deferral [ 3.885002] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 3.891471] platform 54280000.hdmi: Driver tegra-hdmi requests probe deferral ~$off # PYBOOT: Exception: timeout

========================================================================

Board dalmore-multi_v7_defconfig failure log: -------------------------------------------------

[ 2.962119] i2c 0-004c: Driver lm90 requests probe deferral [ 2.969450] tegra-dsi 54300000.dsi: cannot get VDD supply [ 2.975048] platform 54300000.dsi: Driver tegra-dsi requests probe deferral [ 2.984869] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 2.991333] platform 54280000.hdmi: Driver tegra-hdmi requests probe deferral [ 3.001771] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.007367] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 3.016555] tegra-ehci 7d008000.usb: irq 129, io mem 0x7d008000 [ 3.032203] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 3.042043] hub 1-0:1.0: USB hub found [ 3.046040] hub 1-0:1.0: 1 port detected [ 3.052469] i2c 0-004c: Driver lm90 requests probe deferral [ 3.060019] tegra-dsi 54300000.dsi: cannot get VDD supply [ 3.065653] platform 54300000.dsi: Driver tegra-dsi requests probe deferral [ 3.075725] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 3.082237] platform 54280000.hdmi: Driver tegra-hdmi requests probe deferral [ 3.094311] input: gpio-keys as /devices/soc0/gpio-keys/input/input1 [ 3.102528] i2c 0-004c: Driver lm90 requests probe deferral [ 3.108235] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 3.147170] VDD_5V0_HDMI_CON: disabling [ 3.151081] vdd_cam_1v8_reg: disabling [ 3.155312] vdd_hdmi_5v0: disabling [ 3.158981] usb1_vbus: disabling [ 3.162289] dvdd_ts: disabling [ 3.169753] tegra-dsi 54300000.dsi: cannot get VDD supply [ 3.170423] ALSA device list: [ 3.170439] #0: NVIDIA Tegra Dalmore [ 3.182167] platfodsi requests probe deferral [ 3.187083] Waiting for root device /dev/mmcblk0p1... [ 3.189468] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 3.189703] platform 54280000.hdmi: Driver tegra-hdmi requests probe deferral [ 3.362292] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 3.845677] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f [ 3.857339] i2c 0-004c: Driver lm90 requests probe deferral [ 3.864827] tegra-dsi 54300000.dsi: cannot get VDD supply [ 3.870461] platform 54300000.dsi: Driver tegra-dsi requests probe deferral [ 3.880335] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 3.886809] platform 54280000.hdmi: Driver tegra-hdmi requests probe deferral ~$off # PYBOOT: Exception: timeout

========================================================================

Board hummingboard-multi_v7_defconfig failure log: -------------------------------------------------

[ 1.031197] usbcore: registered new interface driver usb-storage [ 1.042337] ci_hdrc ci_hdrc.0: doesn't support gadget [ 1.047549] ci_hdrc ci_hdrc.0: EHCI Host Controller [ 1.052496] ci_hdrc ci_hdrc.0: new USB bus registered, assigned bus number 1 [ 1.064989] ci_hdrc ci_hdrc.0: USB 2.0 started, EHCI 1.00 [ 1.071184] hub 1-0:1.0: USB hub found [ 1.074996] hub 1-0:1.0: 1 port detected [ 1.082655] ci_hdrc ci_hdrc.1: doesn't support gadget [ 1.087758] ci_hdrc ci_hdrc.1: EHCI Host Controller [ 1.092680] ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 2 [ 1.104997] ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00 [ 1.111139] hub 2-0:1.0: USB hub found [ 1.114934] hub 2-0:1.0: 1 port detected [ 1.119685] mousedev: PS/2 mouse device common for all mice [ 1.127982] i2c /dev entries driver [ 1.132673] usbcore: registered new interface driver uvcvideo [ 1.138449] USB Video Class driver (1.1.1) [ 1.142570] gspca_main: v2.14.0 registered [ 1.149292] sdhci: Secure Digital Host Controller Interface driver [ 1.155505] sdhci: Copyright(c) Pierre Ossman [ 1.160702] Synopsys Designware Multimedia Card Interface Driver [ 1.167673] usbcore: registered new interface driver usbhid [ 1.173274] usbhid: USB HID core driver [ 1.181989] TCP: cubic registered [ 1.185354] NET: Registered protocol family 17 [ 1.189825] can: controller area network core (rev 20120528 abi 9) [ 1.196085] NET: Registered protocol family 29 [ 1.200560] can: raw protocol (rev 20120528) [ 1.204841] can: broadcast manager protocol (rev 20120528 t) [ 1.210533] can: netlink gateway (rev 20130117) max_hops=1 [ 1.216415] Key type dns_resolver registered [ 1.220861] ThumbEE CPU extension supported. [ 1.225178] Registering SWP/SWPB emulation handler [ 1.231156] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 1.246354] ALSA device list: [ 1.249338] No soundcards found. [ 1.253437] Waiting for root device /dev/mmcblk0p2... [ 60.325110] imx-sdma 20ec000.sdma: firmware not found ~$off # PYBOOT: Exception: timeout

========================================================================

Board jetson-multi_v7_defconfig failure log: -------------------------------------------------

[ 2.243811] hub 1-0:1.0: USB hub found [ 2.247640] hub 1-0:1.0: 1 port detected [ 2.252648] platform 7d008000.usb: Driver tegra-ehci requests probe deferral [ 2.261098] +1.05V_RUN_AVDD_HDMI_PLL: 1050 mV [ 2.265643] +1.05V_RUN_AVDD_HDMI_PLL: supplied by +1.05V_RUN [ 2.273576] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.280231] [drm] No driver support for vblank timestamp query. [ 2.286223] host1x drm: No connectors reported connected with modes [ 2.292518] [drm] Cannot find any crtc or sizes - going 1024x768 [ 2.307611] Console: switching to colour frame buffer device 128x48 [ 2.321122] host1x drm: fb0: frame buffer device [ 2.325853] host1x drm: registered panic notifier [ 2.342001] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 2.348576] tegra-ehci 7d008000.usb: EHCI Host Controller [ 2.354015] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 2.361889] tegra-ehci 7d008000.usb: irq 129, io mem 0x7d008000 [ 2.377022] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 2.383815] hub 2-0:1.0: USB hub found [ 2.387627] hub 2-0:1.0: 1 port detected [ 2.392724] input: gpio-keys as /devices/soc0/gpio-keys/input/input1 [ 2.400073] as3722-rtc as3722-rtc: setting system clock to 2000-02-01 00:00:18 UTC (949363218) [ 2.418266] +1.05V_RUN_AVDD_HDMI_PLL: disabling [ 2.422814] +1.8V_RUN_VPP_FUSE: disabling [ 2.427242] +2.8V_RUN_CAM_AF: disabling [ 2.431427] +3.3V_RUN_TOUCH: disabling [ 2.435546] +1.05V_RUN_CAM_REAR: disabling [ 2.439790] +VDDIO_SDMMC3: disabling [ 2.443496] +1.2V_RUN_CAM_FRONT: disabling [ 2.447721] +2.8V_RUN_CAM: disabling [ 2.451412] +1.8V_RUN_CAM: disabling [ 2.455117] +1.05V_RUN: disabling [ 2.458561] +USB0_VBUS_SW: disabling [ 2.462147] +3.3V_AVDD_HDMI_AP_GATED: disabling [ 2.467020] ALSA device list: [ 2.469984] #0: NVIDIA Tegra Jetson TK1 [ 2.474608] Waiting for root device /dev/mmcblk0p1... [ 2.697007] usb 2-1: new high-speed USB device number 2 using tegra-ehci [ 3.159815] asix 2-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 68:7f:74:ba:ef:28 ~$off # PYBOOT: Exception: timeout

========================================================================

Board sama5-sama5_defconfig failure log: -------------------------------------------------

[info] Using makefile-style concurrent boot in runlevel S. [....] CONFIG_SYSFS_DEPRECATED must not be selected ...[?25l[?1c7[warn8[?25h[?0c (warning). [....] Booting will continue in 30 seconds but many things will be broken ...[?25l[?1c7[warn8[?25h[?0c (warning). random: nonblocking pool is initialized [....] Starting the hotplug events dispatcher: udevdudevd[708]: starting version 175 [?25l[?1c7[ ok 8[?25h[?0c. [....] Synthesizing the initial hotplug events...[?25l[?1c7[ ok 8[?25h[?0cdone. [....] Waiting for /dev to be fully populated...[?25l[?1c7[ ok 8[?25h[?0cdone. [....] Activating swap...[?25l[?1c7[ ok 8[?25h[?0cdone. EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [....] Cleaning up temporary files... /tmp[?25l[?1c7[ ok 8[?25h[?0c. [....] Activating lvm and md swap...[?25l[?1c7[ ok 8[?25h[?0cdone. [....] Checking file systems...fsck from util-linux 2.20.1 [?25l[?1c7[ ok 8[?25h[?0cdone. [....] Mounting local filesystems...[?25l[?1c7[ ok 8[?25h[?0cdone. [....] Activating swapfile swap...[?25l[?1c7[ ok 8[?25h[?0cdone. [....] Cleaning up temporary files...[?25l[?1c7[ ok 8[?25h[?0c. [....] Setting kernel variables ...[?25l[?1c7[ ok 8[?25h[?0cdone. [....] Configuring network interfaces...Internet Systems Consortium DHCP Client 4.2.2 Copyright 2004-2011 Internet Systems Consortium. All rights reserved. For info, please visit https://www.isc.org/software/dhcp/

IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready Listening on LPF/eth0/08:00:08:e1:88:0e Sending on LPF/eth0/08:00:08:e1:88:0e Sending on Socket/fallback DHCPREQUEST on eth0 to 255.255.255.255 port 67 macb f0028000.ethernet eth0: link up (1000/Full) IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready DHCPREQUEST on eth0 to 255.255.255.255 port 67 DHCPACK from 172.16.1.1 bound to 172.16.1.199 -- renewal in 3215 seconds. [?25l[?1c7[ ok 8[?25h[?0cdone. [....] Cleaning up temporary files...[?25l[?1c7[ ok 8[?25h[?0c. INIT: Entering runlevel: 2 [info] Using makefile-style concurrent boot in runlevel 2. [....] Starting enhanced syslogd: rsyslogd[?25l[?1c7[ ok 8[?25h[?0c. [....] Starting web server: apache2~$off # PYBOOT: Exception: timeout

========================================================================

Board seaboard-multi_v7_defconfig failure log: -------------------------------------------------

[ 2.140560] tegra-ehci c5000000.usb: USB 2.0 started, EHCI 1.00 [ 2.147082] hub 3-0:1.0: USB hub found [ 2.150869] hub 3-0:1.0: 1 port detected [ 2.155713] input: gpio-keys as /devices/soc0/gpio-keys/input/input4 [ 2.162618] tps6586x-rtc tps6586x-rtc: setting system clock to 2014-06-14 07:28:34 UTC (1402730914) [ 2.174717] vdd_1v2: disabling [ 2.177938] vdd_1v5: disabling [ 2.181819] ALSA device list: [ 2.184777] #0: NVIDIA Tegra Seaboard [ 2.189187] VFS: Cannot open root device "mmcblk0p3" or unknown-block(0,0): error -6 [ 2.196943] Please append a correct "root=" boot option; here are the available partitions: [ 2.205298] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0) [ 2.213546] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.15.0-next-20140613 #1 [ 2.220691] [<c02160fc>] (unwind_backtrace) from [<c0211c68>] (show_stack+0x10/0x14) [ 2.228428] [<c0211c68>] (show_stack) from [<c0811e00>] (dump_stack+0x88/0x98) [ 2.235638] [<c0811e00>] (dump_stack) from [<c080ec50>] (panic+0xa0/0x218) [ 2.242504] [<c080ec50>] (panic) from [<c0ad80b0>] (mount_block_root+0x1a0/0x230) [ 2.249973] [<c0ad80b0>] (mount_block_root) from [<c0ad8248>] (mount_root+0x108/0x110) [ 2.257875] [<c0ad8248>] (mount_root) from [<c0ad83a8>] (prepare_namespace+0x158/0x1a0) [ 2.265864] [<c0ad83a8>] (prepare_namespace) from [<c0ad7d6c>] (kernel_init_freeable+0x1cc/0x1dc) [ 2.274720] [<c0ad7d6c>] (kernel_init_freeable) from [<c080cf48>] (kernel_init+0x8/0xf0) [ 2.282795] [<c080cf48>] (kernel_init) from [<c020e7b8>] (ret_from_fork+0x14/0x3c) [ 2.290348] CPU1: stopping [ 2.293049] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 3.15.0-next-20140613 #1 [ 2.300179] [<c02160fc>] (unwind_backtrace) from [<c0211c68>] (show_stack+0x10/0x14) [ 2.307911] [<c0211c68>] (show_stack) from [<c0811e00>] (dump_stack+0x88/0x98) [ 2.315119] [<c0811e00>] (dump_stack) from [<c021490c>] (handle_IPI+0x148/0x174) [ 2.322500] [<c021490c>] (handle_IPI) from [<c0208934>] (gic_handle_irq+0x64/0x68) [ 2.330053] [<c0208934>] (gic_handle_irq) from [<c02127c0>] (__irq_svc+0x40/0x50) [ 2.337515] Exception stack(0xea087f68 to 0xea087fb0) [ 2.342554] 7f60: 00000000 c0bc1fb4 c0bc1fb4 0000004c 88327480 00000000 [ 2.350714] 7f80: 887be160 00000000 eafb6db0 ea086000 00000000 c081f050 00000015 ea087fb0 [ 2.358870] 7fa0: c06b31ec c06b31f8 60000113 ffffffff [ 2.363915] [<c02127c0>] (__irq_svc) from [<c06b31f8>] (cpuidle_enter_state+0x68/0x100) [ 2.371912] [<c06b31f8>] (cpuidle_enter_state) from [<c027f2a8>] (cpu_startup_entry+0x1ec/0x210) [ 2.380681] [<c027f2a8>] (cpu_startup_entry) from [<00208a84>] (0x208a84) [ 2.387453] drm_kms_helper: panic occurred, switching back to text console [ 2.394331] ---[ end Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0) ~$off # PYBOOT: Exception: panic

========================================================================

Board snowball-u8500_defconfig failure log: -------------------------------------------------

[ 3.743743] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.23.auto [ 3.755676] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.23.auto) status -22 [ 3.763000] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.774475] musb-ux500 musb-hdrc.23.auto: Error applying setting, reverse things back [ 3.783020] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.24.auto [ 3.794921] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.24.auto) status -22 [ 3.802246] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.813720] musb-hdrc musb-hdrc.24.auto: Error applying setting, reverse things back [ 3.821563] HS USB OTG: no transceiver configured [ 3.826263] musb-hdrc musb-hdrc.24.auto: musb_init_controller failed with status -517 [ 3.834106] platform musb-hdrc.24.auto: Driver musb-hdrc requests probe deferral [ 3.842041] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.24.auto [ 3.853942] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.24.auto) status -22 [ 3.861267] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.872741] musb-ux500 musb-hdrc.24.auto: Error applying setting, reverse things back [ 3.881286] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.25.auto [ 3.893188] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.25.auto) status -22 [ 3.900512] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.911987] musb-hdrc musb-hdrc.25.auto: Error applying setting, reverse things back [ 3.919799] HS USB OTG: no transceiver configured [ 3.924530] musb-hdrc musb-hdrc.25.auto: musb_init_controller failed with status -517 [ 3.932373] platform musb-hdrc.25.auto: Driver musb-hdrc requests probe deferral [ 3.940277] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.25.auto [ 3.952209] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.25.auto) status -22 [ 3.959503] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.970977] musb-ux500 musb-hdrc.25.auto: Error applying setting, reverse things back [ 3.979492] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.26.auto) status -22 [ 3.979492] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.979522] musb-hdrc musb-hdrc.26.auto: Error applying setting, reverse things back [ 3.979583] HS USB OTG: no transceiver configured [ 3.979614] musb-hdrc musb-hdrc.26.auto: musb_init_controller failed with status -517 [ 3.979614] platform musb-hdrc.26.auto: Driver musb-hdrc requests probe deferral [ 3.980133] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.26.auto [ 3.980133] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.26.auto) status -22 [ 3.980133] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.980133] musb-ux500 musb-hdrc.26.auto: Error applying setting, reverse things back [ 3.980285] Unable to handle kernel paging request at virtual address 000074af [ 4.072326] pgd = 0a010010 ~$off # PYBOOT: Exception: timeout

========================================================================

Board wandboard-multi_v7_defconfig failure log: -------------------------------------------------

[ 1.065107] ohci-platform: OHCI generic platform driver [ 1.070508] ohci-omap3: OHCI OMAP3 driver [ 1.074677] SPEAr-ohci: OHCI SPEAr driver [ 1.079506] usbcore: registered new interface driver usb-storage [ 1.090515] ci_hdrc ci_hdrc.0: doesn't support gadget [ 1.095596] ci_hdrc ci_hdrc.0: no supported roles [ 1.100423] 2184200.usb supply vbus not found, using dummy regulator [ 1.110528] ci_hdrc ci_hdrc.1: doesn't support gadget [ 1.115609] ci_hdrc ci_hdrc.1: EHCI Host Controller [ 1.120527] ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 1 [ 1.132833] ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00 [ 1.139032] hub 1-0:1.0: USB hub found [ 1.142856] hub 1-0:1.0: 1 port detected [ 1.147543] mousedev: PS/2 mouse device common for all mice [ 1.155698] i2c /dev entries driver [ 1.160356] usbcore: registered new interface driver uvcvideo [ 1.166133] USB Video Class driver (1.1.1) [ 1.170253] gspca_main: v2.14.0 registered [ 1.176946] sdhci: Secure Digital Host Controller Interface driver [ 1.183155] sdhci: Copyright(c) Pierre Ossman [ 1.188327] Synopsys Designware Multimedia Card Interface Driver [ 1.195258] usbcore: registered new interface driver usbhid [ 1.200854] usbhid: USB HID core driver [ 1.209236] TCP: cubic registered [ 1.212570] NET: Registered protocol family 17 [ 1.217059] can: controller area network core (rev 20120528 abi 9) [ 1.223319] NET: Registered protocol family 29 [ 1.227798] can: raw protocol (rev 20120528) [ 1.232081] can: broadcast manager protocol (rev 20120528 t) [ 1.237769] can: netlink gateway (rev 20130117) max_hops=1 [ 1.243659] Key type dns_resolver registered [ 1.248416] ThumbEE CPU extension supported. [ 1.252715] Registering SWP/SWPB emulation handler [ 1.258678] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 1.273973] ALSA device list: [ 1.276956] No soundcards found. [ 1.280949] Waiting for root device /dev/mmcblk0p2... [ 60.323437] imx-sdma 20ec000.sdma: firmware not found ~$off # PYBOOT: Exception: timeout