Failed boards:
dalmore tegra_defconfig : FAILED 1:28.55 dalmore multi_v7_defconfig : FAILED 1:05.33 dalmore multi_lpae_defconfig : FAILED 1:05.13 panda multi_v7_defconfig : FAILED 1:34.59
Successful boards:
apc vt8500_v6_v7_defconfig : passed 1:18.62 arndale exynos_defconfig : passed 1:02.91 bbb omap2plus_defconfig : passed 1:30.77 bbb multi_v7_defconfig : passed 1:28.91 beaver tegra_defconfig : passed 0:53.68 beaver multi_v7_defconfig : passed 0:49.70 capri bcm_defconfig : passed 0:43.97 capri multi_v7_defconfig : passed 0:44.32 cubie sunxi_defconfig : passed 1:03.35 cubie multi_v7_defconfig : passed 1:21.68 cubie2 sunxi_defconfig : passed 1:03.98 cubie2 multi_v7_defconfig : passed 1:10.49 cubie2 multi_lpae_defconfig : passed 1:03.59 cubox dove_defconfig : passed 0:56.91 hummingboard imx_v6_v7_defconfig : passed 1:16.66 hummingboard multi_v7_defconfig : passed 1:11.65 omap5uevm multi_v7_defconfig : warnings 1:36.64 omap5uevm multi_lpae_defconfig : warnings 1:35.24 panda omap2plus_defconfig : passed 1:14.98 sama5 sama5_defconfig : passed 1:51.38 seaboard tegra_defconfig : passed 1:01.87 seaboard multi_v7_defconfig : passed 1:08.04 snow exynos_defconfig : passed 1:23.79 snowball u8500_defconfig : passed 1:27.40 snowball multi_v7_defconfig : passed 2:05.56 trimslice tegra_defconfig : passed 1:00.61 trimslice multi_v7_defconfig : passed 1:11.40 wandboard imx_v6_v7_defconfig : passed 0:56.40 wandboard multi_v7_defconfig : passed 1:08.27
Offline boards:
omap5uevm omap2plus_defconfig : OFFLINE 2:30.19
Board legend is available at http://arm-soc.lixom.net/boards.html
Last entries of failed logs below:
========================================================================
Board dalmore-multi_lpae_defconfig failure log: -------------------------------------------------
Tegra114 (Dalmore) # tftp 0x82000000 mainline/v3.14-8380-g3c83e61/multi_lpae_defconfig/zImage tftp 0x82000000 mainline/v3.14-8380-g3c83e61/multi_lpae_defconfig/zImage Using asx0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.138 Filename 'mainline/v3.14-8380-g3c83e61/multi_lpae_defconfig/zImage'. Load address: 0x82000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################# 2.8 MiB/s done Bytes transferred = 4524472 (4509b8 hex) Tegra114 (Dalmore) #setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 Tegra114 (Dalmore) # tftp 0x83000000 mainline/v3.14-8380-g3c83e61/multi_lpae_defconfig/dtbs/tegra114-dalmore.dtb tftp 0x83000000 mainline/v3.14-8380-g3c83e61/multi_lpae_defconfig/dtbs/tegra114-dalmore.dtb Using asx0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.138 Filename 'mainline/v3.14-8380-g3c83e61/multi_lpae_defconfig/dtbs/tegra114-dalmore.dtb'. Load address: 0x83000000 Loading: *### 2.5 MiB/s done Bytes transferred = 34059 (850b hex) Tegra114 (Dalmore) # printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 root=/dev/mmcblk0p1 rootwait debug earlyprintk Tegra114 (Dalmore) # bootz 0x82000000 - 0x83000000 bootz 0x82000000 - 0x83000000 Kernel image @ 0x82000000 [ 0x000000 - 0x4509b8 ] ## Flattened Device Tree blob at 83000000 Booting using the fdt blob at 0x83000000 Loading Device Tree to 8fff4000, end 8ffff50a ... OK
Starting kernel ...
~$off # PYBOOT: Exception: timeout
========================================================================
Board dalmore-multi_v7_defconfig failure log: -------------------------------------------------
Tegra114 (Dalmore) #tftp 0x82000000 mainline/v3.14-8380-g3c83e61/multi_v7_defconfig/zImage tftp 0x82000000 mainline/v3.14-8380-g3c83e61/multi_v7_defconfig/zImage Using asx0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.138 Filename 'mainline/v3.14-8380-g3c83e61/multi_v7_defconfig/zImage'. Load address: 0x82000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ############################################### 2.8 MiB/s done Bytes transferred = 4501328 (44af50 hex) Tegra114 (Dalmore) #setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 Tegra114 (Dalmore) # tftp 0x83000000 mainline/v3.14-8380-g3c83e61/multi_v7_defconfig/dtbs/tegra114-dalmore.dtb tftp 0x83000000 mainline/v3.14-8380-g3c83e61/multi_v7_defconfig/dtbs/tegra114-dalmore.dtb Using asx0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.138 Filename 'mainline/v3.14-8380-g3c83e61/multi_v7_defconfig/dtbs/tegra114-dalmore.dtb'. Load address: 0x83000000 Loading: *### 2.5 MiB/s done Bytes transferred = 34059 (850b hex) Tegra114 (Dalmore) # printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 root=/dev/mmcblk0p1 rootwait debug earlyprintk Tegra114 (Dalmore) # bootz 0x82000000 - 0x83000000 bootz 0x82000000 - 0x83000000 Kernel image @ 0x82000000 [ 0x000000 - 0x44af50 ] ## Flattened Device Tree blob at 83000000 Booting using the fdt blob at 0x83000000 Loading Device Tree to 8fff4000, end 8ffff50a ... OK
Starting kernel ...
~$off # PYBOOT: Exception: timeout
========================================================================
Board dalmore-tegra_defconfig failure log: -------------------------------------------------
[ 1.076689] avdd-usb: 3300 mV [ 1.078685] avdd-usb: supplied by vdd-sys-5v0 [ 1.084852] rail-3v3: no parameters [ 1.088765] rail-5v0: no parameters [ 1.092329] REGEN3: no parameters [ 1.095282] SYSEN1: no parameters [ 1.098813] SYSEN2: no parameters [ 1.103908] Linux video capture interface: v2.00 [ 1.110444] platform 70019010.iommu: Driver tegra-smmu requests probe deferral [ 1.117393] Advanced Linux Sound Architecture Driver Initialized. [ 1.127252] Bluetooth: Core ver 2.19 [ 1.129363] NET: Registered protocol family 31 [ 1.133535] Bluetooth: HCI device and connection manager initialized [ 1.140059] Bluetooth: HCI socket layer initialized [ 1.144939] Bluetooth: L2CAP socket layer initialized [ 1.150267] Bluetooth: SCO socket layer initialized [ 1.157542] cfg80211: Calling CRDA to update world regulatory domain [ 1.164352] Switched to clocksource arch_sys_counter [ 1.252370] NET: Registered protocol family 2 [ 1.258810] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 1.264479] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 1.271192] TCP: Hash tables configured (established 8192 bind 8192) [ 1.278667] TCP: reno registered [ 1.280288] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 1.286438] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 1.293954] NET: Registered protocol family 1 [ 1.299739] RPC: Registered named UNIX socket transport module. [ 1.303859] RPC: Registered udp transport module. [ 1.308689] RPC: Registered tcp transport module. [ 1.313393] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.319957] PCI: CLS 0 bytes, default 64 [ 1.339983] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 1.348682] bounce pool size: 64 pages [ 1.356418] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.363449] msgmni has been set to 1468 [ 1.371426] io scheduler noop registered (default) [ 1.404252] tegra114-pinctrl 70000868.pinmux: Config param 000e not supported on group drive_gma [ 1.411310] tegra114-pinctrl 70000868.pinmux: pin_config_group_set op failed for group 199 [ 1.419616] tegra114-pinctrl 70000868.pinmux: Error applying set~$off # PYBOOT: Exception: timeout
========================================================================
Board panda-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.608306] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.615051] usbcore: registered new interface driver usbhid [ 1.620880] usbhid: USB HID core driver [ 1.628295] TCP: cubic registered [ 1.631805] NET: Registered protocol family 17 [ 1.636596] Key type dns_resolver registered [ 1.641540] Power Management for TI OMAP4+ devices. [ 1.646667] Power Management for TI OMAP4. [ 1.650939] OMAP4 PM: u-boot >= v2012.07 is required for full PM support [ 1.658020] Registering SWP/SWPB emulation handler [ 1.664459] vwl1271: 1800 mV [ 1.669342] Skipping twl internal clock init and using bootloader value (unknown osc rate) [ 1.678527] twl 0-0048: PIH (irq 39) nested IRQs [ 1.684173] twl_rtc rtc.11: Power up reset detected. [ 1.691345] twl_rtc rtc.11: Enabling TWL-RTC [ 1.698059] twl_rtc rtc.11: rtc core: registered rtc.11 as rtc0 [ 1.705169] VAUX1_6030: 1000 <--> 3000 mV at 2800 mV [ 1.711273] VAUX2_6030: 1200 <--> 2800 mV at 1800 mV [ 1.717376] VAUX3_6030: 1000 <--> 3000 mV at 1200 mV [ 1.723480] VMMC: 1200 <--> 3000 mV at 3000 mV [ 1.728973] VPP: 1800 <--> 2500 mV at 1900 mV [ 1.734374] VUSIM: 1200 <--> 2900 mV at 1800 mV [ 1.739379] VDAC: 1800 mV [ 1.743103] VANA: 2100 mV [ 1.746612] VCXIO: 1800 mV [ 1.749694] VUSB: 3300 mV [ 1.753570] V1V8: 1800 mV [ 1.757110] V2V1: 2100 mV [ 1.763122] omap_i2c 48070000.i2c: bus 0 rev0.11 at 400 kHz [ 1.888458] usb 1-1: new high-speed USB device number 2 using ehci-omap [ 2.040252] hub 1-1:1.0: USB hub found [ 2.044830] hub 1-1:1.0: 5 ports detected [ 2.061340] omap_i2c 48072000.i2c: bus 1 rev0.11 at 400 kHz [ 2.284667] gic_timer_retrigger: lost localtimer interrupt [ 2.369384] usb 1-1.1: new high-speed USB device number 3 using ehci-omap [ 2.394195] omap_i2c 48060000.i2c: bus 2 rev0.11 at 100 kHz [ 2.510223] smsc95xx v1.0.4 [ 2.589263] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-4a064c00.ehci-1.1, smsc95xx USB 2.0 Ethernet, 0a:8b:3a:44:a7:09 ~$off # PYBOOT: Exception: timeout