arndale : passed 0:47.41 beaver : passed 1:45.53 cubie : passed 0:53.30 cubie2 : passed 0:59.93 cubox : passed 0:49.12 panda : FAILED 0:44.96 sama5 : passed 1:48.17 snowball : passed 1:16.75 multi-beaver : passed 0:29.19 multi-panda : FAILED 0:44.64 multi-snowball : FAILED 0:45.45
Last entries of failed logs below:
========================================================================
Board panda failure log: -------------------------------------------------
scanning bus for devices... node: panda-es status: on 3 USB Device(s) found scanning bus for storage devices... 0 Storage Device(s) found scanning bus for ethernet devices... 1 Ethernet Device(s) found Panda # setenv autoload no setenv autoload no Panda # dhcp dhcp Waiting for Ethernet connection... unable to connect. Panda # setenv bootfile mainline/v3.11-10048-g89dc77b/uImage.omap setenv bootfile mainline/v3.11-10048-g89dc77b/uImage.omap Panda # setenv autoboot no setenv autoboot no Panda # printenv printenv autoboot=no autoload=no baudrate=115200 bootargs=console=ttyO2,115200 root=/dev/mmcblk0p2 rootwait debug earlyprintk bootcmd=run usb_boot ; run legacy ; run local bootdelay=1 bootfile=mainline/v3.11-10048-g89dc77b/uImage.omap console=ttyO2,115200n8 ethact=sms0 fdt_high=0xffffffff legacy=usb start ; bootp ; tftpboot 0x80000000 172.16.1.7:/srv/tftp/uImage.panda && bootm 0x80000000 loadaddr=0x80000000 local=mmc rescan 0 ; fatload mmc 0:1 0x80000000 uImage && bootm 0x80000000 serverip=172.16.1.7 usb_boot=usb start ; bootp ; tftpboot 0x80000000 172.16.1.7:/srv/tftp/uImage.panda && tftp 0x81000000 172.16.1.7:/srv/tftp/omap4-panda.dtb && bootm 0x80000000 - 0x81000000 usbethaddr=2E:60:67:E0:49:01
Environment size: 731/131068 bytes Panda # printenv bootargs printenv bootargs bootargs=console=ttyO2,115200 root=/dev/mmcblk0p2 rootwait debug earlyprintk Panda # tftpboot 0x80000000 172.16.1.4:/srv/tftp/mainline/v3.11-10048-g89dc77b/uImage.omap tftpboot 0x80000000 172.16.1.4:/srv/tftp/mainline/v3.11-10048-g89dc77b/uImage.omap Waiting for Ethernet connection... unable to connect. Panda # ~$off
========================================================================
Board multi-panda failure log: -------------------------------------------------
scanning bus for devices... node: panda-es status: on 3 USB Device(s) found scanning bus for storage devices... 0 Storage Device(s) found scanning bus for ethernet devices... 1 Ethernet Device(s) found Panda # setenv autoload no setenv autoload no Panda # dhcp dhcp Waiting for Ethernet connection... unable to connect. Panda # setenv bootfile mainline/v3.11-10048-g89dc77b/uImage.multi-2g setenv bootfile mainline/v3.11-10048-g89dc77b/uImage.multi-2g Panda # setenv autoboot no setenv autoboot no Panda # printenv printenv autoboot=no autoload=no baudrate=115200 bootargs=console=ttyO2,115200 root=/dev/mmcblk0p2 rootwait debug earlyprintk bootcmd=run usb_boot ; run legacy ; run local bootdelay=1 bootfile=mainline/v3.11-10048-g89dc77b/uImage.multi-2g console=ttyO2,115200n8 ethact=sms0 fdt_high=0xffffffff legacy=usb start ; bootp ; tftpboot 0x80000000 172.16.1.7:/srv/tftp/uImage.panda && bootm 0x80000000 loadaddr=0x80000000 local=mmc rescan 0 ; fatload mmc 0:1 0x80000000 uImage && bootm 0x80000000 serverip=172.16.1.7 usb_boot=usb start ; bootp ; tftpboot 0x80000000 172.16.1.7:/srv/tftp/uImage.panda && tftp 0x81000000 172.16.1.7:/srv/tftp/omap4-panda.dtb && bootm 0x80000000 - 0x81000000 usbethaddr=2E:60:67:E0:49:01
Environment size: 735/131068 bytes Panda # printenv bootargs printenv bootargs bootargs=console=ttyO2,115200 root=/dev/mmcblk0p2 rootwait debug earlyprintk Panda # tftpboot 0x80000000 172.16.1.4:/srv/tftp/mainline/v3.11-10048-g89dc77b/uImage.multi-2g tftpboot 0x80000000 172.16.1.4:/srv/tftp/mainline/v3.11-10048-g89dc77b/uImage.multi-2g Waiting for Ethernet connection... unable to connect. Panda # ~$off
========================================================================
Board multi-snowball failure log: -------------------------------------------------
Environment size: 1709/4092 bytes U8500 $ printenv bootargs printenv bootargs bootargs=console=ttyAMA2,115200 root=/dev/mmcblk0p4 rootwait rw debug earlyprintk U8500 $ tftpboot 0x100000 172.16.1.4:/srv/tftp/mainline/v3.11-10048-g89dc77b/uImage.multi-snowball tftpboot 0x100000 172.16.1.4:/srv/tftp/mainline/v3.11-10048-g89dc77b/uImage.multi-snowball smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC 08:00:08:1e:0f:44 Using smc911x-0 device TFTP from server 172.16.1.4; our IP address is 172.16.1.106 Filename '/srv/tftp/mainline/v3.11-10048-g89dc77b/uImage.multi-snowball'. Load address: 0x100000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ############################################### done Bytes transferred = 3568284 (36729c hex) U8500 $ bootm 0x100000 bootm 0x100000 ## Booting kernel from Legacy Image at 00100000 ... Image Name: Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 3568220 Bytes = 3.4 MB Load Address: 00008000 Entry Point: 00008000 Loading Kernel Image ... OK OK
Starting kernel ...
~$off