Tree/Branch: mainline Git describe: v3.15-rc2-42-g4d0fa8a Failed boot tests (console logs at the end) =========================================== legacy,3730xm: FAIL: omap2plus_defconfig omap3-beagle-xm: FAIL: omap2plus_defconfig omap4-panda-es: FAIL: multi_v7_defconfig
Full Report ===========
omap2plus_defconfig ------------------- legacy,3730xm 1 min 3.7 sec: FAIL am335x-boneblack 0 min 43.8 sec: PASS omap3-beagle-xm 1 min 16.7 sec: FAIL legacy,3530beagle 0 min 36.0 sec: PASS (Warnings: 1) omap4-panda 1 min 6.8 sec: PASS omap3-overo-tobi 0 min 23.6 sec: PASS (Warnings: 1) am335x-bone 0 min 32.7 sec: PASS omap3-overo-storm-tobi 0 min 21.6 sec: PASS omap5-uevm 1 min 7.5 sec: PASS (Warnings: 1) omap3-n900 0 min 49.5 sec: PASS (Warnings: 1) legacy,n900 0 min 42.6 sec: PASS (Warnings: 1) omap4-panda-es 1 min 16.5 sec: PASS legacy,3730storm 0 min 22.6 sec: PASS legacy,3530overo 0 min 21.0 sec: PASS (Warnings: 1)
multi_lpae_defconfig -------------------- omap5-uevm 1 min 37.2 sec: PASS (Warnings: 1) sun7i-a20-cubieboard2 0 min 12.5 sec: PASS
tegra_defconfig --------------- tegra30-beaver 0 min 17.3 sec: PASS
imx_v6_v7_defconfig ------------------- imx6dl-wandboard,wand-dual 0 min 18.6 sec: PASS imx6dl-wandboard,wand-solo 0 min 19.2 sec: PASS imx6q-wandboard 0 min 17.2 sec: PASS
sunxi_defconfig --------------- sun7i-a20-cubieboard2 0 min 22.7 sec: PASS sun4i-a10-cubieboard 0 min 12.8 sec: PASS
bcm_defconfig ------------- bcm28155-ap 0 min 22.9 sec: PASS
mvebu_v7_defconfig ------------------ armada-xp-openblocks-ax3-4 0 min 22.1 sec: PASS armada-370-mirabox 0 min 20.2 sec: PASS
exynos_defconfig ---------------- exynos5250-arndale 0 min 30.7 sec: PASS
multi_v7_defconfig ------------------ qcom-apq8074-dragonboard 0 min 17.0 sec: PASS ste-snowball 1 min 20.4 sec: PASS tegra30-beaver 0 min 17.1 sec: PASS am335x-boneblack 0 min 37.5 sec: PASS omap3-beagle-xm 0 min 58.6 sec: PASS sun7i-a20-cubieboard2 0 min 12.2 sec: PASS armada-370-mirabox 0 min 22.3 sec: PASS omap4-panda 0 min 53.6 sec: PASS armada-xp-openblocks-ax3-4 0 min 25.2 sec: PASS sun4i-a10-cubieboard 0 min 19.4 sec: PASS bcm28155-ap 0 min 27.6 sec: PASS omap3-overo-tobi 0 min 22.1 sec: PASS (Warnings: 1) imx6dl-wandboard,wand-solo 0 min 18.3 sec: PASS am335x-bone 0 min 26.9 sec: PASS omap3-overo-storm-tobi 0 min 23.8 sec: PASS omap5-uevm 1 min 41.8 sec: PASS (Warnings: 1) omap3-n900 0 min 35.9 sec: PASS (Warnings: 1) imx6q-wandboard 0 min 16.8 sec: PASS omap4-panda-es 2 min 23.1 sec: FAIL imx6dl-wandboard,wand-dual 0 min 18.4 sec: PASS
u8500_defconfig --------------- ste-snowball 0 min 31.9 sec: PASS
sama5_defconfig --------------- sama5d35ek 0 min 17.0 sec: PASS
davinci_all_defconfig --------------------- legacy,dm365evm 0 min 17.4 sec: PASS da850-evm 0 min 15.8 sec: PASS
Console logs for failures =========================
omap2plus_defconfig -------------------
legacy,3730xm: FAIL: last 80 lines of boot log: -----------------------------------------------
version
U-Boot 2013.04 (Jan 17 2014 - 10:48:29) arm-linux-gnueabi-gcc (Ubuntu/Linaro 4.7.3-1ubuntu1) 4.7.3 GNU ld (GNU Binutils for Ubuntu) 2.23.2 OMAP3 beagleboard.org #setenv usbethaddr 2a:45:34:6d:b4:5d setenv usbethaddr 2a:45:34:6d:b4:5d OMAP3 beagleboard.org # setenv preboot "dcache off; usb start" # For USB net setenv preboot "dcache off; usb start" # For USB net OMAP3 beagleboard.org # setenv bootargs console=ttyO2,115200n8 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 setenv bootargs console=ttyO2,115200n8 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 OMAP3 beagleboard.org # setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:::none:192.168.1.254' setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:::none:192.168.1.254' OMAP3 beagleboard.org # if test -n ${initenv}; then run initenv; fi if test -n ${initenv}; then run initenv; fi OMAP3 beagleboard.org # if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi (Re)start USB... USB0: USB EHCI 1.00 scanning bus 0 for devices... 3 USB Device(s) found scanning usb for storage devices... 0 Storage Device(s) found scanning usb for ethernet devices... 1 Ethernet Device(s) found OMAP3 beagleboard.org #setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no OMAP3 beagleboard.org # dhcp dhcp ERROR: Need valid 'usbnet_devaddr' to be set at ether.c:2369/usb_eth_init() Waiting for Ethernet connection... done. BOOTP broadcast 1 BOOTP broadcast 2 DHCP client bound to address 192.168.1.190 OMAP3 beagleboard.org #setenv serverip 192.168.1.2 setenv serverip 192.168.1.2 OMAP3 beagleboard.org #if test -n ${netargs}; then run netargs; fi if test -n ${netargs}; then run netargs; fi OMAP3 beagleboard.org #tftp 0x80200000 192.168.1.2:tmp/3730xm-LA5Wgc/zImage tftp 0x80200000 192.168.1.2:tmp/3730xm-LA5Wgc/zImage Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.190 Filename 'tmp/3730xm-LA5Wgc/zImage'. Load address: 0x80200000 Loading: *T ################################################################# ################################################################# ################################################################# ################################################################# ################################# 434.6 KiB/s done Bytes transferred = 4299416 (419a98 hex) OMAP3 beagleboard.org # tftp 0x81000000 192.168.1.2:buildroot.cpio.gz.uboot tftp 0x81000000 192.168.1.2:buildroot.cpio.gz.uboot Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.190 Filename 'buildroot.cpio.gz.uboot'. Load address: 0x81000000 Loading: *T ############################################ 103.5 KiB/s done Bytes transferred = 642602 (9ce2a hex) OMAP3 beagleboard.org # printenv bootargs printenv bootargs bootargs=console=ttyO2,115200n8 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.190:192.168.1.2:192.168.1.254:255.255.255.0:::none:192.168.1.254 OMAP3 beagleboard.org #bootz 0x80200000 0x81000000 bootz 0x80200000 0x81000000 ## Loading init Ramdisk from Legacy Image at 81000000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000
Starting kernel ...
~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 63.69 seconds. # PYBOOT: Result: FAIL
omap3-beagle-xm: FAIL: last 80 lines of boot log: -------------------------------------------------
scanning bus 0 for devices... 3 USB Device(s) found scanning usb for storage devices... 0 Storage Device(s) found scanning usb for ethernet devices... 1 Ethernet Device(s) found OMAP3 beagleboard.org # setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no OMAP3 beagleboard.org # dhcp dhcp ERROR: Need valid 'usbnet_devaddr' to be set at ether.c:2369/usb_eth_init() Waiting for Ethernet connection... done. BOOTP broadcast 1 EHCI timed out on TD - token=0x8008d80 BOOTP broadcast 2 DHCP client bound to address 192.168.1.190 OMAP3 beagleboard.org #setenv serverip 192.168.1.2 setenv serverip 192.168.1.2 OMAP3 beagleboard.org # if test -n ${netargs}; then run netargs; fi if test -n ${netargs}; then run netargs; fi OMAP3 beagleboard.org # tftp 0x80200000 192.168.1.2:tmp/3730xm-IvjfBZ/zImage tftp 0x80200000 192.168.1.2:tmp/3730xm-IvjfBZ/zImage Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.190 Filename 'tmp/3730xm-IvjfBZ/zImage'. Load address: 0x80200000 Loading: *EHCI timed out on TD - token=0x8008d80 T ################################################################# ################################################################# ################################################################# ################################################################# ################################# 409.2 KiB/s done Bytes transferred = 4299416 (419a98 hex) OMAP3 beagleboard.org # tftp 0x81000000 192.168.1.2:buildroot.cpio.gz.uboot tftp 0x81000000 192.168.1.2:buildroot.cpio.gz.uboot Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.190 Filename 'buildroot.cpio.gz.uboot'. Load address: 0x81000000 Loading: *EHCI timed out on TD - token=0x88008d80 T ############################################ 109.4 KiB/s done Bytes transferred = 642602 (9ce2a hex) OMAP3 beagleboard.org # tftp 0x81f00000 192.168.1.2:tmp/3730xm-IvjfBZ/omap3-beagle-xm.dtb tftp 0x81f00000 192.168.1.2:tmp/3730xm-IvjfBZ/omap3-beagle-xm.dtb Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.190 Filename 'tmp/3730xm-IvjfBZ/omap3-beagle-xm.dtb'. Load address: 0x81f00000 Loading: *EHCI timed out on TD - token=0x8008d80 T ##### 5.9 KiB/s done Bytes transferred = 60981 (ee35 hex) OMAP3 beagleboard.org # printenv bootargs printenv bootargs bootargs=console=ttyO2,115200n8 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.190:192.168.1.2:192.168.1.254:255.255.255.0:::none:192.168.1.254 OMAP3 beagleboard.org # bootz 0x80200000 0x81000000 0x81f00000 bootz 0x80200000 0x81000000 0x81f00000 ## Loading init Ramdisk from Legacy Image at 81000000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 ## Flattened Device Tree blob at 81f00000 Booting using the fdt blob at 0x81f00000 Loading Ramdisk to 8ff63000, end 8ffffdea ... OK Loading Device Tree to 8ff51000, end 8ff62e34 ... OK
Starting kernel ...
~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 76.67 seconds. # PYBOOT: Result: FAIL
multi_v7_defconfig ------------------
omap4-panda-es: FAIL: last 80 lines of boot log: ------------------------------------------------
[ 1.431457] 4806e000.serial: ttyO3 at MMIO 0x4806e000 (irq = 102, base_baud = 3000000) is a OMAP UART3 [ 1.441711] STMicroelectronics ASC driver initialized [ 1.447875] serial: Freescale lpuart driver [ 1.452484] [drm] Initialized drm 1.1.0 20060810 [ 1.462677] loop: module loaded [ 1.472076] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver [ 1.479919] usbcore: registered new interface driver pegasus [ 1.485931] usbcore: registered new interface driver asix [ 1.491668] usbcore: registered new interface driver ax88179_178a [ 1.498107] usbcore: registered new interface driver cdc_ether [ 1.504302] usbcore: registered new interface driver smsc75xx [ 1.510406] usbcore: registered new interface driver smsc95xx [ 1.516479] usbcore: registered new interface driver net1080 [ 1.522460] usbcore: registered new interface driver cdc_subset [ 1.528717] usbcore: registered new interface driver zaurus [ 1.534667] usbcore: registered new interface driver cdc_ncm [ 1.540649] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.547485] ehci-pci: EHCI PCI platform driver [ 1.552215] ehci-platform: EHCI generic platform driver [ 1.557922] ehci-omap: OMAP-EHCI Host Controller driver [ 1.583679] ehci-omap 4a064c00.ehci: EHCI Host Controller [ 1.589385] ehci-omap 4a064c00.ehci: new USB bus registered, assigned bus number 1 [ 1.597686] ehci-omap 4a064c00.ehci: irq 109, io mem 0x4a064c00 [ 1.619018] ehci-omap 4a064c00.ehci: USB 2.0 started, EHCI 1.00 [ 1.625946] hub 1-0:1.0: USB hub found [ 1.629943] hub 1-0:1.0: 3 ports detected [ 1.634643] ehci-orion: EHCI orion driver [ 1.639068] SPEAr-ehci: EHCI SPEAr driver [ 1.643432] tegra-ehci: Tegra EHCI driver [ 1.648315] usbcore: registered new interface driver usb-storage [ 1.656433] mousedev: PS/2 mouse device common for all mice [ 1.664367] i2c /dev entries driver [ 1.668853] usbcore: registered new interface driver uvcvideo [ 1.674926] USB Video Class driver (1.1.1) [ 1.679260] gspca_main: v2.14.0 registered [ 1.685638] sdhci: Secure Digital Host Controller Interface driver [ 1.692138] sdhci: Copyright(c) Pierre Ossman [ 1.697448] omap_hsmmc 4809c000.mmc: unable to get vmmc regulator -517 [ 1.704376] platform 4809c000.mmc: Driver omap_hsmmc requests probe deferral [ 1.712066] omap_hsmmc 480d5000.mmc: unable to get vmmc regulator -517 [ 1.718963] platform 480d5000.mmc: Driver omap_hsmmc requests probe deferral [ 1.726867] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.733734] usbcore: registered new interface driver usbhid [ 1.739593] usbhid: USB HID core driver [ 1.747558] TCP: cubic registered [ 1.751068] NET: Registered protocol family 17 [ 1.755920] Key type dns_resolver registered [ 1.760925] Power Management for TI OMAP4+ devices. [ 1.766082] Power Management for TI OMAP4. [ 1.770416] OMAP4 PM: u-boot >= v2012.07 is required for full PM support [ 1.777801] ThumbEE CPU extension supported. [ 1.782287] Registering SWP/SWPB emulation handler [ 1.787994] vwl1271: 1800 mV [ 1.796539] Skipping twl internal clock init and using bootloader value (unknown osc rate) [ 1.805755] twl 0-0048: PIH (irq 39) nested IRQs [ 1.812072] twl_rtc rtc.15: Enabling TWL-RTC [ 1.819091] twl_rtc rtc.15: rtc core: registered rtc.15 as rtc0 [ 1.825927] VAUX1_6030: 1000 <--> 3000 mV at 2800 mV [ 1.832031] VAUX2_6030: 1200 <--> 2800 mV at 1800 mV [ 1.838073] VAUX3_6030: 1000 <--> 3000 mV at 1200 mV [ 1.844146] VMMC: 1200 <--> 3000 mV at 3000 mV [ 1.849731] VPP: 1800 <--> 2500 mV at 1900 mV [ 1.855194] VUSIM: 1200 <--> 2900 mV at 1800 mV [ 1.860198] VDAC: 1800 mV [ 1.863922] VANA: 2100 mV [ 1.867492] VCXIO: 1800 mV [ 1.867492] VUSB: 3300 mV [ 1.874420] V1V8: 1800 mV [ 1.877990] V2V1: 2100 mV [ 1.885650] omap_i2c 48070000.i2c: bus 0 rev0.11 at 400 kHz [ 1.959075] usb 1-1: new high-speed USB device number 2 using ehci-omap [ 2.110656] hub 1-1:1.0: USB hub found [ 2.115234] hub 1-1:1.0: 5 ports detected [ 2.499206] usb 1-1.1: new high-speed USB device number 3 using ehci-omap [ 2.663970] smsc95xx v1.0.4 [ 2.737579] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-4a064c00.ehci-1.1, smsc95xx USB 2.0 Ethernet, d2:f6:17:4e:a7:1a ~$off # PYBOOT: Exception: kernel: ERROR: failed to boot: <class 'pexpect.TIMEOUT'> # PYBOOT: Time: 143.10 seconds. # PYBOOT: Result: FAIL