Failed boards:
cubie2 sunxi_defconfig : FAILED 1:24.88 cubie2 multi_v7_defconfig : FAILED 1:35.18 cubie2 multi_lpae_defconfig : FAILED 1:21.88 omap5uevm omap2plus_defconfig : FAILED 1:45.84 omap5uevm multi_v7_defconfig : FAILED 1:54.04 omap5uevm multi_lpae_defconfig : FAILED 1:47.50 snow multi_lpae_defconfig : FAILED 1:13.88 snowball u8500_defconfig : FAILED 1:50.06
Successful boards:
apc vt8500_v6_v7_defconfig : passed 1:14.59 arndale exynos_defconfig : passed 1:19.04 arndale multi_v7_defconfig : passed 1:37.67 arndale multi_lpae_defconfig : passed 1:27.78 bbb omap2plus_defconfig : passed 1:32.44 bbb multi_v7_defconfig : passed 1:23.82 beaver tegra_defconfig : passed 1:18.44 beaver multi_v7_defconfig : passed 1:24.85 capri bcm_defconfig : passed 0:38.95 capri multi_v7_defconfig : passed 0:41.19 cubie sunxi_defconfig : passed 1:28.42 cubie multi_v7_defconfig : warnings 1:31.75 cubox multi_v7_defconfig : passed 1:15.37 dalmore tegra_defconfig : passed 1:32.25 dalmore multi_v7_defconfig : passed 1:30.63 hummingboard imx_v6_v7_defconfig : passed 1:34.63 hummingboard multi_v7_defconfig : passed 1:29.15 jetson tegra_defconfig : passed 1:07.71 jetson multi_v7_defconfig : passed 1:04.21 jetson multi_lpae_defconfig : passed 1:04.66 panda omap2plus_defconfig : warnings 1:26.07 panda multi_v7_defconfig : warnings 1:54.04 sama5 sama5_defconfig : warnings 1:56.58 seaboard tegra_defconfig : passed 1:05.32 seaboard multi_v7_defconfig : passed 1:30.04 snow exynos_defconfig : passed 1:22.18 snow multi_v7_defconfig : passed 1:22.53 snowball multi_v7_defconfig : passed 2:24.40 trimslice tegra_defconfig : passed 1:07.66 trimslice multi_v7_defconfig : passed 1:09.80 wandboard imx_v6_v7_defconfig : passed 1:07.82 wandboard multi_v7_defconfig : passed 1:04.16
Offline boards:
dalmore multi_lpae_defconfig : OFFLINE 1:10.76
Board legend is available at http://arm-soc.lixom.net/boards.html
Last entries of failed logs below:
========================================================================
Board cubie2-multi_lpae_defconfig failure log: -------------------------------------------------
[ 1.328968] ahci-sunxi 1c18000.sata: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl platform mode [ 1.337933] ahci-sunxi 1c18000.sata: flags: ncq sntf pm led clo only pio slum part ccc [ 1.347485] scsi0 : ahci_platform [ 1.351201] ata1: SATA max UDMA/133 mmio [mem 0x01c18000-0x01c18fff] port 0x100 irq 88 [ 1.359947] ehci-platform 1c14000.usb: EHCI Host Controller [ 1.365597] ehci-platform 1c14000.usb: new USB bus registered, assigned bus number 1 [ 1.373659] ehci-platform 1c14000.usb: irq 71, io mem 0x01c14000 [ 1.379861] mmc0: new high speed SDHC card at address aaaa [ 1.385740] ehci-platform 1c14000.usb: USB 2.0 started, EHCI 1.00 [ 1.392020] mmcblk0: mmc0:aaaa SU16G 14.8 GiB [ 1.397576] hub 1-0:1.0: USB hub found [ 1.401809] hub 1-0:1.0: 1 port detected [ 1.405897] mmcblk0: p1 [ 1.410174] ehci-platform 1c1c000.usb: EHCI Host Controller [ 1.415858] ehci-platform 1c1c000.usb: new USB bus registered, assigned bus number 2 [ 1.423842] ehci-platform 1c1c000.usb: irq 72, io mem 0x01c1c000 [ 1.435219] ehci-platform 1c1c000.usb: USB 2.0 started, EHCI 1.00 [ 1.442191] hub 2-0:1.0: USB hub found [ 1.446040] hub 2-0:1.0: 1 port detected [ 1.451037] ohci-platform 1c14400.usb: Generic Platform OHCI controller [ 1.457736] ohci-platform 1c14400.usb: new USB bus registered, assigned bus number 3 [ 1.465579] ohci-platform 1c14400.usb: irq 96, io mem 0x01c14400 [ 1.530078] hub 3-0:1.0: USB hub found [ 1.533932] hub 3-0:1.0: 1 port detected [ 1.538932] ohci-platform 1c1c400.usb: Generic Platform OHCI controller [ 1.545652] ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 4 [ 1.553513] ohci-platform 1c1c400.usb: irq 97, io mem 0x01c1c400 [ 1.615034] hub 4-0:1.0: USB hub found [ 1.618875] hub 4-0:1.0: 1 port detected [ 1.623537] sunxi-rtc 1c20d00.rtc: setting system clock to 1970-01-01 00:00:14 UTC (14) [ 1.711093] No MAC Management Counters available [ 1.715868] stmmac_open: ERROR: allocating the WoL IRQ -61 (-22) [ 1.722486] IP-Config: Failed to open eth0 [ 1.726610] IP-Config: No network devices available [ 1.731525] vcc3v0: disabling [ 1.734606] ALSA device list: [ 1.737589] No soundcards found. [ 1.741727] ata1: SATA link down (SStatus 0 SControl 300) ~$off # PYBOOT: Exception: timeout
========================================================================
Board cubie2-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.324417] ahci-sunxi 1c18000.sata: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl platform mode [ 1.333386] ahci-sunxi 1c18000.sata: flags: ncq sntf pm led clo only pio slum part ccc [ 1.342925] scsi0 : ahci_platform [ 1.346642] ata1: SATA max UDMA/133 mmio [mem 0x01c18000-0x01c18fff] port 0x100 irq 88 [ 1.355382] ehci-platform 1c14000.usb: EHCI Host Controller [ 1.361034] ehci-platform 1c14000.usb: new USB bus registered, assigned bus number 1 [ 1.369087] ehci-platform 1c14000.usb: irq 71, io mem 0x01c14000 [ 1.375296] mmc0: new high speed SDHC card at address aaaa [ 1.381169] ehci-platform 1c14000.usb: USB 2.0 started, EHCI 1.00 [ 1.387443] mmcblk0: mmc0:aaaa SU16G 14.8 GiB [ 1.393008] hub 1-0:1.0: USB hub found [ 1.397243] hub 1-0:1.0: 1 port detected [ 1.401338] mmcblk0: p1 [ 1.405662] ehci-platform 1c1c000.usb: EHCI Host Controller [ 1.411367] ehci-platform 1c1c000.usb: new USB bus registered, assigned bus number 2 [ 1.419347] ehci-platform 1c1c000.usb: irq 72, io mem 0x01c1c000 [ 1.430691] ehci-platform 1c1c000.usb: USB 2.0 started, EHCI 1.00 [ 1.437714] hub 2-0:1.0: USB hub found [ 1.441553] hub 2-0:1.0: 1 port detected [ 1.446553] ohci-platform 1c14400.usb: Generic Platform OHCI controller [ 1.453238] ohci-platform 1c14400.usb: new USB bus registered, assigned bus number 3 [ 1.461081] ohci-platform 1c14400.usb: irq 96, io mem 0x01c14400 [ 1.525559] hub 3-0:1.0: USB hub found [ 1.529401] hub 3-0:1.0: 1 port detected [ 1.534427] ohci-platform 1c1c400.usb: Generic Platform OHCI controller [ 1.541152] ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 4 [ 1.548995] ohci-platform 1c1c400.usb: irq 97, io mem 0x01c1c400 [ 1.610514] hub 4-0:1.0: USB hub found [ 1.614353] hub 4-0:1.0: 1 port detected [ 1.619037] sunxi-rtc 1c20d00.rtc: setting system clock to 1970-01-01 00:00:14 UTC (14) [ 1.706570] No MAC Management Counters available [ 1.711346] stmmac_open: ERROR: allocating the WoL IRQ -61 (-22) [ 1.717961] IP-Config: Failed to open eth0 [ 1.722081] IP-Config: No network devices available [ 1.727001] vcc3v0: disabling [ 1.730083] ALSA device list: [ 1.733061] No soundcards found. [ 1.737178] ata1: SATA link down (SStatus 0 SControl 300) ~$off # PYBOOT: Exception: timeout
========================================================================
Board cubie2-sunxi_defconfig failure log: -------------------------------------------------
[ 0.993990] mmc0: new high speed SDHC card at address aaaa [ 0.999913] mmcblk0: mmc0:aaaa SU16G 14.8 GiB [ 1.005911] mmcblk0: p1 [ 1.016179] ahci-sunxi 1c18000.sata: controller can't do PMP, turning off CAP_PMP [ 1.023664] ahci-sunxi 1c18000.sata: forcing PORTS_IMPL to 0x1 [ 1.029575] ahci-sunxi 1c18000.sata: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl platform mode [ 1.038547] ahci-sunxi 1c18000.sata: flags: ncq sntf pm led clo only pio slum part ccc [ 1.047441] scsi0 : ahci_platform [ 1.051092] ata1: SATA max UDMA/133 mmio [mem 0x01c18000-0x01c18fff] port 0x100 irq 88 [ 1.059366] ehci-platform 1c14000.usb: EHCI Host Controller [ 1.064966] ehci-platform 1c14000.usb: new USB bus registered, assigned bus number 1 [ 1.072837] ehci-platform 1c14000.usb: irq 71, io mem 0x01c14000 [ 1.096105] ehci-platform 1c14000.usb: USB 2.0 started, EHCI 1.00 [ 1.103072] hub 1-0:1.0: USB hub found [ 1.106912] hub 1-0:1.0: 1 port detected [ 1.111380] ehci-platform 1c1c000.usb: EHCI Host Controller [ 1.117019] ehci-platform 1c1c000.usb: new USB bus registered, assigned bus number 2 [ 1.124858] ehci-platform 1c1c000.usb: irq 72, io mem 0x01c1c000 [ 1.146097] ehci-platform 1c1c000.usb: USB 2.0 started, EHCI 1.00 [ 1.152980] hub 2-0:1.0: USB hub found [ 1.156808] hub 2-0:1.0: 1 port detected [ 1.161255] ohci-platform 1c14400.usb: Generic Platform OHCI controller [ 1.167936] ohci-platform 1c14400.usb: new USB bus registered, assigned bus number 3 [ 1.175780] ohci-platform 1c14400.usb: irq 96, io mem 0x01c14400 [ 1.240920] hub 3-0:1.0: USB hub found [ 1.244719] hub 3-0:1.0: 1 port detected [ 1.249239] ohci-platform 1c1c400.usb: Generic Platform OHCI controller [ 1.255873] ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 4 [ 1.263749] ohci-platform 1c1c400.usb: irq 97, io mem 0x01c1c400 [ 1.330937] hub 4-0:1.0: USB hub found [ 1.334721] hub 4-0:1.0: 1 port detected [ 1.339090] sunxi-rtc 1c20d00.rtc: setting system clock to 1970-01-01 00:00:16 UTC (16) [ 1.426124] ata1: SATA link down (SStatus 0 SControl 300) [ 1.442414] No MAC Management Counters available [ 1.447177] stmmac_open: ERROR: allocating the WoL IRQ -61 (-22) [ 1.453775] IP-Config: Failed to open eth0 [ 1.457899] IP-Config: No network devices available [ 1.462796] vcc3v0: disabling ~$off # PYBOOT: Exception: timeout
========================================================================
Board omap5uevm-multi_lpae_defconfig failure log: -------------------------------------------------
[ 47.092506] NET: Registered protocol family 17 [ 47.092532] mmcblk0boot1: mmc0:0001 SEM04G partition 2 2.00 MiB [ 47.102099] mmcblk0: unknown partition table [ 47.102878] mmcblk0boot1: unknown partition table [ 47.103641] mmcblk0boot0: unknown partition table [ 47.117906] can: controller area network core (rev 20120528 abi 9) [ 47.124407] NET: Registered protocol family 29 [ 47.129057] can: raw protocol (rev 20120528) [ 47.133522] can: broadcast manager protocol (rev 20120528 t) [ 47.139443] can: netlink gateway (rev 20130117) max_hops=1 [ 47.145447] Key type dns_resolver registered [ 47.149984] omap_vc_init_channel: No PMIC info for vdd_core [ 47.155813] omap_vp_init: No PMIC info for vdd_core [ 47.160914] omap_vc_init_channel: No PMIC info for vdd_mm [ 47.166553] omap_vp_init: No PMIC info for vdd_mm [ 47.171465] omap_vc_init_channel: No PMIC info for vdd_mpu [ 47.177193] omap_vp_init: No PMIC info for vdd_mpu [ 47.182485] ThumbEE CPU extension supported. [ 47.186967] Registering SWP/SWPB emulation handler [ 47.193147] palmas 0-0048: Irq flag is 0x00000000 [ 47.200821] palmas 0-0048: Muxing GPIO 2, PWM 0, LED 0 [ 47.208388] smps123: 600 <--> 1500 mV at 1060 mV [ 47.214520] smps45: 600 <--> 1310 mV at 1030 mV [ 47.220970] smps6: 1200 mV [ 47.224968] smps7: 1800 mV [ 47.229099] smps8: 600 <--> 1310 mV at 1040 mV [ 47.234831] smps9: failed to get the current voltage [ 47.240077] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 47.252120] palmas-pmic: probe of 48070000.i2c:palmas@48:palmas_pmic failed with error -22 [ 47.376732] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 47.521741] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 47.527820] platform 4a140000.sata: Driver ahci requests probe deferral [ 47.535268] omap_hsmmc 4809c000.mmc: unable to get vmmc regulator -517 [ 47.542127] platform 4809c000.mmc: Driver omap_hsmmc requests probe deferral [ 47.549832] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 47.563250] ALSA device list: [ 47.566345] No soundcards found. [ 47.570336] Waiting for root device /dev/mmcblk1p2... ~$off # PYBOOT: Exception: timeout
========================================================================
Board omap5uevm-multi_v7_defconfig failure log: -------------------------------------------------
[ 47.516657] can: raw protocol (rev 20120528) [ 47.516665] can: broadcast manager protocol (rev 20120528 t) [ 47.516677] can: netlink gateway (rev 20130117) max_hops=1 [ 47.516977] Key type dns_resolver registered [ 47.517060] omap_vc_init_channel: No PMIC info for vdd_core [ 47.517062] omap_vp_init: No PMIC info for vdd_core [ 47.517066] omap_vc_init_channel: No PMIC info for vdd_mm [ 47.517067] omap_vp_init: No PMIC info for vdd_mm [ 47.517071] omap_vc_init_channel: No PMIC info for vdd_mpu [ 47.517073] omap_vp_init: No PMIC info for vdd_mpu [ 47.517387] ThumbEE CPU extension supported. [ 47.517401] Registering SWP/SWPB emulation handler [ 47.522576] palmas 0-0048: Irq flag is 0x00000000 [ 47.600308] palmas 0-0048: Muxing GPIO 2, PWM 0, LED 0 [ 47.607008] mmc0: new high speed MMC card at address 0001 [ 47.612932] mmcblk0: mmc0:0001 SEM04G 3.68 GiB [ 47.617759] mmcblk0boot0: mmc0:0001 SEM04G partition 1 2.00 MiB [ 47.624022] mmcblk0boot1: mmc0:0001 SEM04G partition 2 2.00 MiB [ 47.630502] smps123: 600 <--> 1500 mV at 1060 mV [ 47.635781] mmcblk0: unknown partition table [ 47.641141] mmcblk0boot1: unknown partition table [ 47.646164] smps45: 600 <--> 1310 mV at 1030 mV [ 47.651421] mmcblk0boot0: unknown partition table [ 47.657586] smps6: 1200 mV [ 47.661587] smps7: 1800 mV [ 47.665681] smps8: 600 <--> 1310 mV at 1040 mV [ 47.671409] smps9: failed to get the current voltage [ 47.676663] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 47.688712] palmas-pmic: probe of 48070000.i2c:palmas@48:palmas_pmic failed with error -22 [ 47.816857] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 47.961867] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 47.967957] platform 4a140000.sata: Driver ahci requests probe deferral [ 47.975405] omap_hsmmc 4809c000.mmc: unable to get vmmc regulator -517 [ 47.982257] platform 4809c000.mmc: Driver omap_hsmmc requests probe deferral [ 47.989973] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 48.003397] ALSA device list: [ 48.006486] No soundcards found. [ 48.010476] Waiting for root device /dev/mmcblk1p2... ~$off # PYBOOT: Exception: timeout
========================================================================
Board omap5uevm-omap2plus_defconfig failure log: -------------------------------------------------
[ 2.012952] NET: Registered protocol family 15 [ 2.013115] Key type dns_resolver registered [ 2.013212] omap_vc_init_channel: No PMIC info for vdd_core [ 2.013216] omap_vp_init: No PMIC info for vdd_core [ 2.013225] omap_vc_init_channel: No PMIC info for vdd_mm [ 2.013228] omap_vp_init: No PMIC info for vdd_mm [ 2.013237] omap_vc_init_channel: No PMIC info for vdd_mpu [ 2.013240] omap_vp_init: No PMIC info for vdd_mpu [ 2.013785] ThumbEE CPU extension supported. [ 2.013807] Registering SWP/SWPB emulation handler [ 2.013816] SmartReflex Class3 initialized [ 2.043190] palmas 0-0048: Irq flag is 0x00000000 [ 2.121515] mmcblk0: mmc0:0001 SEM04G 3.68 GiB [ 2.126645] mmcblk0boot0: mmc0:0001 SEM04G partition 1 2.00 MiB [ 2.133095] mmcblk0boot1: mmc0:0001 SEM04G partition 2 2.00 MiB [ 2.141934] mmcblk0: unknown partition table [ 2.148857] mmcblk0boot1: unknown partition table [ 2.155032] palmas 0-0048: Muxing GPIO 2, PWM 0, LED 0 [ 2.155650] mmcblk0boot0: unknown partition table [ 2.213350] smps123: 600 <--> 1500 mV at 1060 mV [ 2.220332] smps45: 600 <--> 1310 mV at 1030 mV [ 2.227617] smps6: 1200 mV [ 2.232347] smps7: 1800 mV [ 2.237262] smps8: 600 <--> 1310 mV at 1040 mV [ 2.243702] smps9: failed to get the current voltage [ 2.249664] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 2.264030] palmas-pmic: probe of 48070000.i2c:palmas@48:palmas_pmic failed with error -22 [ 2.272872] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 2.280630] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 2.286783] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/mmc@4809c000[0]' [ 2.295898] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/mmc@4809c000[0]' [ 2.305261] omap_hsmmc 4809c000.mmc: unable to get vmmc regulator -517 [ 2.312208] platform 4809c000.mmc: Driver omap_hsmmc requests probe deferral [ 2.320686] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 2.329333] sr_init: No PMIC hook to init smartreflex [ 2.334859] sr_init: platform driver register failed for SR [ 2.363013] pbias_mmc_omap5: disabling [ 2.368544] Waiting for root device /dev/mmcblk1p2... ~$off # PYBOOT: Exception: timeout
========================================================================
Board snow-multi_lpae_defconfig failure log: -------------------------------------------------
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0208000 - 0xc0ad8208 (9025 kB) [ 0.000000] .init : 0xc0ad9000 - 0xc0b7f100 ( 665 kB) [ 0.000000] .data : 0xc0b80000 - 0xc0c5ee80 ( 892 kB) [ 0.000000] .bss : 0xc0c5ee88 - 0xc0caad98 ( 304 kB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] L2C: failed to init: -19 [ 0.000000] Exynos5250: clock setup completed, armclk=1700000000 [ 0.000000] Architected cp15 timer(s) running at 24.00MHz (phys). [ 0.000002] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 2863311519744ns [ 0.000006] Switching to timer-based delay loop [ 2889.649142] sched_clock: 64 bits at 24MHz, resolution 41ns, wraps every 2863311519744ns [ 2889.649683] Console: colour dummy device 80x30 [ 2889.649694] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=120000) [ 2889.649701] pid_max: default: 32768 minimum: 301 [ 2889.649761] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 2889.649767] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 2889.650037] CPU: Testing write buffer coherency: ok [ 2889.650147] CPU0: update cpu_power 1024 [ 2889.650153] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 2889.650243] Setting up static identity map for 0x4081d0b0 - 0x4081d148 [ 2889.651334] CPU1: Booted secondary processor [ 2889.651371] CPU1: update cpu_power 1024 [ 2889.651374] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 2889.651421] Brought up 2 CPUs [ 2889.651430] SMP: Total of 2 processors activated. [ 2889.651434] CPU: All CPU(s) started in HYP mode. [ 2889.651438] CPU: Virtualization extensions available. [ 2889.651680] devtmpfs: initialized [ 2889.653541] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 [ 2889.653728] pinctrl core: initialized pinctrl subsystem [ 2889.653928] regulator-dummy: no parameters [ 2889.659851] NET: Registered protocol family 16 [ 2889.660728] DMA: preallocat~$off # PYBOOT: Exception: timeout
========================================================================
Board snowball-u8500_defconfig failure log: -------------------------------------------------
[ 3.538757] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.21.auto [ 3.550659] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.21.auto) status -22 [ 3.557983] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.569458] musb-ux500 musb-hdrc.21.auto: Error applying setting, reverse things back [ 3.578033] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.22.auto [ 3.589965] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.22.auto) status -22 [ 3.597290] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.608764] musb-hdrc musb-hdrc.22.auto: Error applying setting, reverse things back [ 3.616577] HS USB OTG: no transceiver configured [ 3.621307] musb-hdrc musb-hdrc.22.auto: musb_init_controller failed with status -517 [ 3.629150] platform musb-hdrc.22.auto: Driver musb-hdrc requests probe deferral [ 3.637084] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.22.auto [ 3.648986] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.22.auto) status -22 [ 3.656311] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.667785] musb-ux500 musb-hdrc.22.auto: Error applying setting, reverse things back [ 3.676361] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.23.auto [ 3.688293] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.23.auto) status -22 [ 3.695617] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.707092] musb-hdrc musb-hdrc.23.auto: Error applying setting, reverse things back [ 3.714904] HS USB OTG: no transceiver configured [ 3.719635] musb-hdrc musb-hdrc.23.auto: musb_init_controller failed with status -517 [ 3.727478] platform musb-hdrc.23.auto: Driver musb-hdrc requests probe deferral [ 3.735412] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.23.auto [ 3.747344] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.23.auto) status -22 [ 3.754669] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.766143] musb-ux500 musb-hdrc.23.auto: Error applying setting, reverse things back [ 3.774719] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.24.auto [ 3.786651] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.24.auto) status -22 [ 3.793975] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.805450] musb-hdrc musb-hdrc.24.auto: Error applying setting, reverse things back [ 3.813262] HS USB OTG: no transceiver configured [ 3.817962] musb-hdrc musb-hdrc.24.auto: musb_init_controller failed with status -517 [ 3.825805] platform musb-hdrc.24.auto: Driver musb-hdrc requests probe deferral [ 3.833740] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.24.auto [ 3.845672] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.24.auto) status -22 [ 3.852966] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.864471] musb-ux500 musb-hdrc.24.auto: Error applying setting, reverse things back [ 3.873046] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.25.auto ~$off # PYBOOT: Exception: timeout