Full logs are available at http://arm-soc.lixom.net/bootlogs/mainline/v4.6-rc6-149-g7270a3f/
Failed boards:
arndale arm-multi_v7_nosmp_defconfig : FAILED 1:14.67 bbb arm-omap2plus_defconfig : FAILED 1:54.50 bbb arm-multi_v7_defconfig : FAILED 1:53.59 bbb arm-multi_v7_nosmp_defconfig : FAILED 2:10.64 beagleboard-x15 arm-omap2plus_defconfig : FAILED 1:44.73 beagleboard-x15 arm-multi_v7_defconfig : FAILED 1:44.64 beagleboard-x15 arm-multi_lpae_defconfig : FAILED 1:51.84 beagleboard-x15 arm-multi_v7_nosmp_defconfig : FAILED 2:04.89 chitra powerpc-pasemi_defconfig : BUILD FAILED colombus arm-multi_v7_nosmp_defconfig : FAILED 3:20.05 cosmic arm-imx_v6_v7_defconfig : FAILED 2:01.53 cosmic arm-multi_v7_defconfig : FAILED 2:10.16 cosmic arm-multi_v7_nosmp_defconfig : FAILED 2:08.06 dalmore arm-tegra_defconfig : FAILED 1:48.98 dalmore arm-multi_v7_defconfig : FAILED 1:57.53 dalmore arm-multi_lpae_defconfig : FAILED 1:59.24 dalmore arm-multi_v7_nosmp_defconfig : FAILED 1:54.86 minnowmax minnowmax_defconfig : NO BUILD odroidu3 arm-exynos_defconfig : FAILED 1:54.77 omap5uevm arm-multi_v7_defconfig : FAILED 2:10.13 omap5uevm arm-multi_lpae_defconfig : FAILED 0:53.21 omap5uevm arm-multi_v7_nosmp_defconfig : FAILED 1:40.07 seaboard arm-tegra_defconfig : FAILED 1:48.95 seaboard arm-multi_v7_defconfig : FAILED 1:59.78 seaboard arm-multi_v7_nosmp_defconfig : FAILED 1:54.17 snow arm-multi_v7_nosmp_defconfig : FAILED 3:13.29 snowball arm-u8500_defconfig : FAILED 1:55.63 snowball arm-multi_v7_defconfig : FAILED 2:15.89 snowball arm-multi_v7_nosmp_defconfig : FAILED 2:01.04 wandboard arm-imx_v6_v7_defconfig : FAILED 2:58.95
Successful boards:
apc arm-vt8500_v6_v7_defconfig : passed 1:21.42 arndale arm-exynos_defconfig : passed 1:33.33 arndale arm-multi_v7_defconfig : passed 1:23.09 arndale arm-multi_lpae_defconfig : passed 1:20.10 capri arm-bcm_defconfig : passed 0:46.43 capri arm-multi_v7_defconfig : passed 0:57.28 capri arm-multi_v7_nosmp_defconfig : warnings 1:07.57 chitra powerpc-ppc64_defconfig : passed 2:11.70 colibri-vf61 arm-imx_v6_v7_defconfig : passed 1:40.59 colibri-vf61 arm-multi_v7_defconfig : passed 1:29.61 colibri-vf61 arm-multi_v7_nosmp_defconfig : passed 1:21.50 colombus arm-sunxi_defconfig : passed 2:16.76 colombus arm-multi_v7_defconfig : passed 2:51.85 colombus arm-multi_lpae_defconfig : passed 2:30.72 cubie arm-sunxi_defconfig : passed 0:57.81 cubie arm-multi_v7_defconfig : passed 0:57.22 cubie arm-multi_v7_nosmp_defconfig : passed 1:05.14 cubie2 arm-sunxi_defconfig : passed 0:48.29 cubie2 arm-multi_v7_defconfig : passed 1:02.07 cubie2 arm-multi_lpae_defconfig : passed 1:01.40 cubie2 arm-multi_v7_nosmp_defconfig : warnings 0:58.12 cubox arm-multi_v7_defconfig : passed 1:06.10 cubox arm-mvebu_v7_defconfig : passed 1:14.54 cubox arm-multi_v7_nosmp_defconfig : passed 1:28.30 hummingboard arm-multi_v7_defconfig : passed 1:17.95 hummingboard arm-multi_v7_nosmp_defconfig : warnings 1:25.07 jetsontk1 arm-tegra_defconfig : passed 1:35.61 jetsontk1 arm-multi_v7_defconfig : passed 1:34.30 jetsontk1 arm-multi_lpae_defconfig : passed 1:49.58 jetsontk1 arm-multi_v7_nosmp_defconfig : warnings 1:36.24 omap5uevm arm-omap2plus_defconfig : passed 1:04.30 pandaes arm-omap2plus_defconfig : warnings 1:35.86 pandaes arm-multi_v7_defconfig : passed 1:43.83 pandaes arm-multi_v7_nosmp_defconfig : warnings 1:57.27 pi arm-exynos_defconfig : passed 2:09.08 pi arm-multi_v7_defconfig : passed 2:22.22 pi arm-multi_lpae_defconfig : passed 2:36.72 pi arm-multi_v7_nosmp_defconfig : warnings 2:12.62 pit arm-exynos_defconfig : passed 2:12.52 pit arm-multi_v7_defconfig : passed 2:14.43 pit arm-multi_lpae_defconfig : passed 2:22.27 pit arm-multi_v7_nosmp_defconfig : warnings 2:08.96 seattle arm64-defconfig : warnings 2:31.77 snow arm-exynos_defconfig : passed 2:06.62 snow arm-multi_v7_defconfig : passed 2:22.02 snow arm-multi_lpae_defconfig : passed 1:58.53 trimslice arm-tegra_defconfig : passed 2:38.24 trimslice arm-multi_v7_defconfig : passed 1:54.39 trimslice arm-multi_v7_nosmp_defconfig : warnings 1:42.66 wandboard arm-multi_v7_defconfig : passed 1:11.36 wandboard arm-multi_v7_nosmp_defconfig : warnings 1:05.00
Offline boards:
beaver arm-tegra_defconfig : OFFLINE 2:13.22 beaver arm-multi_v7_defconfig : OFFLINE 2:18.78 beaver arm-multi_v7_nosmp_defconfig : OFFLINE 2:16.66 hummingboard arm-imx_v6_v7_defconfig : OFFLINE 0:43.15 parallella arm-multi_v7_defconfig : OFFLINE 2:44.44 parallella arm-multi_v7_nosmp_defconfig : OFFLINE 2:14.49 rk3288evb arm-multi_v7_defconfig : OFFLINE 0:49.19 rk3288evb arm-multi_lpae_defconfig : OFFLINE 0:58.29 rk3288evb arm-multi_v7_nosmp_defconfig : OFFLINE 0:49.74 sama5 arm-sama5_defconfig : OFFLINE 2:18.78 sama5d3-xplained arm-sama5_defconfig : OFFLINE 2:34.96 socfpga arm-socfpga_defconfig : OFFLINE 2:32.20 socfpga arm-multi_v7_defconfig : OFFLINE 2:32.62 socfpga arm-multi_v7_nosmp_defconfig : OFFLINE 2:11.80
Board legend is available at http://arm-soc.lixom.net/boards.html
Board arndale-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
[ 1.999193] ThumbEE CPU extension supported. [ 2.004289] ahci 122f0000.sata: couldn't get PHY in node sata: -517 [ 2.013777] input: gpio_keys as /devices/platform/gpio_keys/input/input0 [ 2.019191] hctosys: unable to open rtc device (rtc0) [ 2.028031] MAIN_DC: disabling [ 2.029636] hdmi-en: disabling [ 2.033032] ahci 122f0000.sata: couldn't get PHY in node sata: -517 [ 2.040058] Unable to handle kernel paging request at virtual address c10b5928 [ 2.046098] pgd = c0204000 [ 2.048788] [c10b5928] *pgd=4100041e(bad) [ 2.052784] Internal error: Oops: 8000000d [#1] ARM [ 2.057642] Modules linked in: [ 2.060684] CPU: 0 PID: 0 Comm: swapper Tainted: G W 4.6.0-rc6-00149-g7270a3f #1 [ 2.069186] Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) [ 2.075263] task: c1006570 ti: c1000000 task.ti: c1000000 [ 2.080645] PC is at 0xc10b5928 [ 2.083776] LR is at cpu_pm_pmu_notify+0x70/0xb4 [ 2.088371] pc : [<c10b5928>] lr : [<c0984430>] psr: 600001d3 [ 2.088371] sp : c1001f88 ip : 00000000 fp : 00000000 [ 2.099826] r10: c10b6420 r9 : 00000000 r8 : 000000a0 [ 2.105035] r7 : c10b6470 r6 : c10b5930 r5 : 00000000 r4 : c100212c [ 2.111544] r3 : 00000006 r2 : 00000000 r1 : 00000006 r0 : 00000001 [ 2.118056] Flags: nZCv IRQs off FIQs off Mode SVC_32 ISA ARM Segment none [ 2.125346] Control: 10c53c7d Table: 40204059 DAC: 00000051 [ 2.131075] Process swapper (pid: 0, stack limit = 0xc1000218) [ 2.136891] Stack: (0xc1001f88 to 0xc1002000) [ 2.141234] 1f80: c10fef5d c1002134 c10b5930 c10b63d0 c1001fac c0a8ec50 [ 2.149393] 1fa0: c1000000 c100212c c1001fb4 c0a8ee54 00000000 c035852c ffffffff c0f00c3c [ 2.157552] 1fc0: ffffffff ffffffff 00000000 c0f00684 00000000 c0f88a20 c11011d4 c10020b4 [ 2.165711] 1fe0: c0f88a1c c100772c 40204059 410fc0f4 00000000 40208078 00000000 00000000 [ 2.173880] [<c0984430>] (cpu_pm_pmu_notify) from [<c0a8ec50>] (schedule+0x44/0x9c) [ 2.181512] Code: c10b5914 c10b5a60 c10b5a60 00000000 (c10b5930) [ 2.187584] ---[ end trace cb88537fdc8fa202 ]--- [ 2.192183] Kernel panic - not syncing: Attempted to kill the idle task! [ 2.198867] ---[ end Kernel panic - not syncing: Attempted to kill the idle task!
[PYBOOT] [arndale 01:12]: got exception: panic ~$off
[PYBOOT] [arndale 01:13]: Done. Board bbb-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.631113] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.641392] ledtrig-cpu: registered to indicate activity on CPUs [ 1.648466] usbcore: registered new interface driver usbhid [ 1.654391] usbhid: USB HID core driver [ 1.666368] NET: Registered protocol family 10 [ 1.672961] sit: IPv6 over IPv4 tunneling driver [ 1.679097] NET: Registered protocol family 17 [ 1.683858] can: controller area network core (rev 20120528 abi 9) [ 1.690499] NET: Registered protocol family 29 [ 1.695219] can: raw protocol (rev 20120528) [ 1.699739] can: broadcast manager protocol (rev 20120528 t) [ 1.705731] can: netlink gateway (rev 20130117) max_hops=1 [ 1.712472] Key type dns_resolver registered [ 1.717384] omap_voltage_late_init: Voltage driver support not added [ 1.725670] ThumbEE CPU extension supported. [ 1.730312] Registering SWP/SWPB emulation handler [ 1.772715] tps65217 0-0024: TPS65217 ID 0xe version 1.2 [ 1.779248] at24 0-0050: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.787006] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 1.795711] at24 2-0054: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.803631] at24 2-0055: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.811458] at24 2-0056: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.819272] at24 2-0057: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.826615] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz [ 1.835304] cpufreq: cpufreq_online: CPU0: Running at unlisted freq: 550000 KHz [ 1.843232] cpufreq: cpufreq_online: CPU0: Unlisted initial frequency changed to: 600000 KHz [ 1.852973] mmc1: new high speed MMC card at address 0001 [ 1.860221] hctosys: unable to open rtc device (rtc0) [ 1.873206] mmcblk1: mmc1:0001 MMC02G 1.79 GiB [ 1.879220] mmcblk1boot0: mmc1:0001 MMC02G partition 1 1.00 MiB [ 1.886200] mmcblk1boot1: mmc1:0001 MMC02G partition 2 1.00 MiB [ 1.895132] mmcblk1: p1 p2 [ 1.900831] Waiting for root device /dev/mmcblk0p2...
[PYBOOT] [bbb 01:50]: Timed out waiting for "<type 'str'>":
[PYBOOT] [bbb 01:51]: got exception: timeout ~$off
[PYBOOT] [bbb 01:52]: Done. Board bbb-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
[ 1.317438] sdhci: Secure Digital Host Controller Interface driver [ 1.323960] sdhci: Copyright(c) Pierre Ossman [ 1.329770] omap_hsmmc 48060000.mmc: Got CD GPIO [ 1.392815] Synopsys Designware Multimedia Card Interface Driver [ 1.400191] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.409370] ledtrig-cpu: registered to indicate activity on CPUs [ 1.416118] usbcore: registered new interface driver usbhid [ 1.421993] usbhid: USB HID core driver [ 1.431562] NET: Registered protocol family 10 [ 1.438040] sit: IPv6 over IPv4 tunneling driver [ 1.443906] NET: Registered protocol family 17 [ 1.448639] can: controller area network core (rev 20120528 abi 9) [ 1.455234] NET: Registered protocol family 29 [ 1.459926] can: raw protocol (rev 20120528) [ 1.464439] can: broadcast manager protocol (rev 20120528 t) [ 1.470413] can: netlink gateway (rev 20130117) max_hops=1 [ 1.476905] Key type dns_resolver registered [ 1.481775] omap_voltage_late_init: Voltage driver support not added [ 1.489576] ThumbEE CPU extension supported. [ 1.502156] at24 0-0050: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.509707] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 1.517752] at24 2-0054: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.525487] at24 2-0055: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.533170] at24 2-0056: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.540857] at24 2-0057: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.548139] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz [ 1.555805] hctosys: unable to open rtc device (rtc0) [ 1.566537] Waiting for root device /dev/mmcblk0p2... [ 1.602084] mmc1: new high speed MMC card at address 0001 [ 1.608545] mmcblk1: mmc1:0001 MMC02G 1.79 GiB [ 1.613607] mmcblk1boot0: mmc1:0001 MMC02G partition 1 1.00 MiB [ 1.620087] mmcblk1boot1: mmc1:0001 MMC02G partition 2 1.00 MiB [ 1.628511] mmcblk1: p1 p2
[PYBOOT] [bbb 02:07]: Timed out waiting for "<type 'str'>":
[PYBOOT] [bbb 02:08]: got exception: timeout ~$off
[PYBOOT] [bbb 02:09]: Done. Board bbb-arm-omap2plus_defconfig failure log: -------------------------------------------------
[ 2.049084] omap_hsmmc 481d8000.mmc: lookup for GPIO cd failed [ 2.055220] omap_hsmmc 481d8000.mmc: GPIO lookup for consumer wp [ 2.061568] omap_hsmmc 481d8000.mmc: using device tree for GPIO lookup [ 2.068464] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@481d8000[0]' [ 2.078088] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@481d8000[0]' [ 2.087615] omap_hsmmc 481d8000.mmc: using lookup tables for GPIO lookup [ 2.094653] omap_hsmmc 481d8000.mmc: lookup for GPIO wp failed [ 2.137826] ledtrig-cpu: registered to indicate activity on CPUs [ 2.146551] oprofile: using arm/armv7 [ 2.151641] Initializing XFRM netlink socket [ 2.156713] NET: Registered protocol family 10 [ 2.167403] sit: IPv6 over IPv4 tunneling driver [ 2.176143] NET: Registered protocol family 17 [ 2.181083] NET: Registered protocol family 15 [ 2.186384] Key type dns_resolver registered [ 2.191305] omap_voltage_late_init: Voltage driver support not added [ 2.198066] sr_dev_init: No voltage domain specified for smartreflex0. Cannot initialize [ 2.206558] sr_dev_init: No voltage domain specified for smartreflex1. Cannot initialize [ 2.216826] ThumbEE CPU extension supported. [ 2.221479] Registering SWP/SWPB emulation handler [ 2.226529] SmartReflex Class3 initialized [ 2.295506] tps65217 0-0024: TPS65217 ID 0xe version 1.2 [ 2.302796] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 2.313305] mmc1: new high speed MMC card at address 0001 [ 2.325391] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz [ 2.333674] mmcblk1: mmc1:0001 MMC02G 1.79 GiB [ 2.341479] hctosys: unable to open rtc device (rtc0) [ 2.346800] sr_init: No PMIC hook to init smartreflex [ 2.352591] sr_init: platform driver register failed for SR [ 2.392543] mmcblk1boot0: mmc1:0001 MMC02G partition 1 1.00 MiB [ 2.400512] mmcblk1boot1: mmc1:0001 MMC02G partition 2 1.00 MiB [ 2.414742] mmcblk1: p1 p2 [ 2.431945] Waiting for root device /dev/mmcblk0p2...
[PYBOOT] [bbb 01:51]: Timed out waiting for "<type 'str'>":
[PYBOOT] [bbb 01:52]: got exception: timeout ~$off
[PYBOOT] [bbb 01:54]: Done. Board beagleboard-x15-arm-multi_lpae_defconfig failure log: -------------------------------------------------
[ 1.717359] at24 0-0050: 4096 byte 24c32 EEPROM, writable, 1 bytes/write [ 1.724443] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 1.750642] rtc-ds1307 2-006f: SET TIME! [ 1.756372] rtc-ds1307 2-006f: rtc core: registered mcp7941x as rtc0 [ 1.763128] rtc-ds1307 2-006f: 64 bytes nvram [ 1.767739] omap_i2c 48060000.i2c: bus 2 rev0.12 at 400 kHz [ 1.775943] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 1.781726] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 [ 1.789964] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x00010010 [ 1.799130] xhci-hcd xhci-hcd.0.auto: irq 400, io mem 0x48890000 [ 1.805993] hub 1-0:1.0: USB hub found [ 1.809947] hub 1-0:1.0: 1 port detected [ 1.814347] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 1.820135] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 [ 1.828234] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.837245] hub 2-0:1.0: USB hub found [ 1.841215] hub 2-0:1.0: 1 port detected [ 1.847244] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 1.881273] vdd_3v3: supplied by regen1 [ 1.919359] rtc-ds1307 2-006f: setting system clock to 2001-01-01 00:00:00 UTC (978307200) [ 1.937499] aic_dvdd_fixed: disabling [ 1.942238] Waiting for root device /dev/mmcblk0p1... [ 1.969407] mmc1: new high speed MMC card at address 0001 [ 1.975382] mmcblk1: mmc1:0001 S10004 3.56 GiB [ 1.980271] mmcblk1boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 1.986604] mmcblk1boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 1.993483] mmcblk1: p1 [ 2.120142] usb 1-1: new high-speed USB device number 2 using xhci-hcd [ 2.155169] usb 2-1: new SuperSpeed USB device number 2 using xhci-hcd [ 2.180351] hub 2-1:1.0: USB hub found [ 2.184326] hub 2-1:1.0: 4 ports detected [ 2.276375] hub 1-1:1.0: USB hub found [ 2.280365] hub 1-1:1.0: 4 ports detected
[PYBOOT] [beagleboard-x15 01:47]: Timed out waiting for "<type 'str'>":
[PYBOOT] [beagleboard-x15 01:48]: got exception: timeout ~$off
[PYBOOT] [beagleboard-x15 01:49]: Done. Board beagleboard-x15-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.713236] at24 0-0050: 4096 byte 24c32 EEPROM, writable, 1 bytes/write [ 1.720315] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 1.745738] rtc-ds1307 2-006f: SET TIME! [ 1.751511] rtc-ds1307 2-006f: rtc core: registered mcp7941x as rtc0 [ 1.758262] rtc-ds1307 2-006f: 64 bytes nvram [ 1.762876] omap_i2c 48060000.i2c: bus 2 rev0.12 at 400 kHz [ 1.771070] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 1.776860] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 [ 1.785101] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x00010010 [ 1.794269] xhci-hcd xhci-hcd.0.auto: irq 400, io mem 0x48890000 [ 1.801139] hub 1-0:1.0: USB hub found [ 1.805093] hub 1-0:1.0: 1 port detected [ 1.809495] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 1.815284] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 [ 1.823403] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.832413] hub 2-0:1.0: USB hub found [ 1.836379] hub 2-0:1.0: 1 port detected [ 1.842388] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 1.876340] vdd_3v3: supplied by regen1 [ 1.912969] rtc-ds1307 2-006f: setting system clock to 2001-01-01 00:00:00 UTC (978307200) [ 1.930770] aic_dvdd_fixed: disabling [ 1.935527] Waiting for root device /dev/mmcblk0p1... [ 1.957302] mmc1: new high speed MMC card at address 0001 [ 1.963271] mmcblk1: mmc1:0001 S10004 3.56 GiB [ 1.968156] mmcblk1boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 1.974496] mmcblk1boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 1.981360] mmcblk1: p1 [ 2.115224] usb 1-1: new high-speed USB device number 2 using xhci-hcd [ 2.150250] usb 2-1: new SuperSpeed USB device number 2 using xhci-hcd [ 2.175506] hub 2-1:1.0: USB hub found [ 2.179487] hub 2-1:1.0: 4 ports detected [ 2.271530] hub 1-1:1.0: USB hub found [ 2.275530] hub 1-1:1.0: 4 ports detected
[PYBOOT] [beagleboard-x15 01:41]: Timed out waiting for "<type 'str'>":
[PYBOOT] [beagleboard-x15 01:42]: got exception: timeout ~$off
[PYBOOT] [beagleboard-x15 01:44]: Done. Board beagleboard-x15-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
[ 1.590680] at24 0-0050: 4096 byte 24c32 EEPROM, writable, 1 bytes/write [ 1.597740] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 1.622994] rtc-ds1307 2-006f: SET TIME! [ 1.628622] rtc-ds1307 2-006f: rtc core: registered mcp7941x as rtc0 [ 1.635335] rtc-ds1307 2-006f: 64 bytes nvram [ 1.639928] omap_i2c 48060000.i2c: bus 2 rev0.12 at 400 kHz [ 1.647323] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 1.653098] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 [ 1.661313] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x00010010 [ 1.670464] xhci-hcd xhci-hcd.0.auto: irq 400, io mem 0x48890000 [ 1.677188] hub 1-0:1.0: USB hub found [ 1.681144] hub 1-0:1.0: 1 port detected [ 1.685460] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 1.691230] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 [ 1.699320] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.708188] hub 2-0:1.0: USB hub found [ 1.712129] hub 2-0:1.0: 1 port detected [ 1.717384] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 1.753230] vdd_3v3: supplied by regen1 [ 1.784299] rtc-ds1307 2-006f: setting system clock to 2001-01-01 00:00:00 UTC (978307200) [ 1.797254] aic_dvdd_fixed: disabling [ 1.802637] Waiting for root device /dev/mmcblk0p1... [ 1.849569] mmc1: new high speed MMC card at address 0001 [ 1.855437] mmcblk1: mmc1:0001 S10004 3.56 GiB [ 1.860266] mmcblk1boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 1.866562] mmcblk1boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 1.873347] mmcblk1: p1 [ 1.992530] usb 1-1: new high-speed USB device number 2 using xhci-hcd [ 2.022552] usb 2-1: new SuperSpeed USB device number 2 using xhci-hcd [ 2.051419] hub 2-1:1.0: USB hub found [ 2.055400] hub 2-1:1.0: 4 ports detected [ 2.147421] hub 1-1:1.0: USB hub found [ 2.151387] hub 1-1:1.0: 4 ports detected
[PYBOOT] [beagleboard-x15 02:02]: Timed out waiting for "<type 'str'>":
[PYBOOT] [beagleboard-x15 02:03]: got exception: timeout ~$off
[PYBOOT] [beagleboard-x15 02:04]: Done. Board beagleboard-x15-arm-omap2plus_defconfig failure log: -------------------------------------------------
[ 2.173917] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 2.180780] of_get_named_gpiod_flags: parsed 'cd-gpios' property of node '/ocp/mmc@4809c000[0]' - status (0) [ 2.191175] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 2.196040] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer wp [ 2.202332] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 2.209195] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@4809c000[0]' [ 2.218793] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@4809c000[0]' [ 2.228301] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 2.235357] omap_hsmmc 4809c000.mmc: lookup for GPIO wp failed [ 2.283728] omap_hsmmc 480b4000.mmc: GPIO lookup for consumer cd [ 2.290022] omap_hsmmc 480b4000.mmc: using device tree for GPIO lookup [ 2.296888] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/ocp/mmc@480b4000[0]' [ 2.306492] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/ocp/mmc@480b4000[0]' [ 2.315989] omap_hsmmc 480b4000.mmc: using lookup tables for GPIO lookup [ 2.323027] omap_hsmmc 480b4000.mmc: lookup for GPIO cd failed [ 2.329144] omap_hsmmc 480b4000.mmc: GPIO lookup for consumer wp [ 2.335448] omap_hsmmc 480b4000.mmc: using device tree for GPIO lookup [ 2.342288] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@480b4000[0]' [ 2.351882] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@480b4000[0]' [ 2.361377] omap_hsmmc 480b4000.mmc: using lookup tables for GPIO lookup [ 2.368417] omap_hsmmc 480b4000.mmc: lookup for GPIO wp failed [ 2.375116] vdd_3v3: supplied by regen1 [ 2.413841] hctosys: unable to open rtc device (rtc0) [ 2.419142] sr_init: No PMIC hook to init smartreflex [ 2.424660] sr_init: platform driver register failed for SR [ 2.472053] aic_dvdd_fixed: disabling [ 2.476311] ldousb: disabling [ 2.485441] Waiting for root device /dev/mmcblk0p1... [ 2.535401] mmc1: new high speed MMC card at address 0001 [ 2.543145] mmcblk1: mmc1:0001 S10004 3.56 GiB [ 2.548411] mmcblk1boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 2.555200] mmcblk1boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 2.563691] mmcblk1: p1
[PYBOOT] [beagleboard-x15 01:42]: Timed out waiting for "<type 'str'>":
[PYBOOT] [beagleboard-x15 01:43]: got exception: timeout ~$off
[PYBOOT] [beagleboard-x15 01:44]: Done. Board colombus-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
[....] Waiting for /dev to be fully populated...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Activating swap...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [ 41.400940] EXT4-fs (mmcblk0p1): warning: mounting fs with errors, running e2fsck is recommended [ 41.415228] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [....] Cleaning up temporary files... /tmp[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] Activating lvm and md swap...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Checking file systems...fsck from util-linux 2.20.1 [?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Mounting local filesystems...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Activating swapfile swap...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Cleaning up temporary files...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] Setting kernel variables ...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [ 84.795079] random: dd urandom read with 54 bits of entropy available [....] Configuring network interfaces...Internet Systems Consortium DHCP Client 4.2.2 Copyright 2004-2011 Internet Systems Consortium. All rights reserved. For info, please visit https://www.isc.org/software/dhcp/
[ 89.186675] eth0: device MAC address 7a:e6:b9:59:d4:4c [ 89.341864] RX IPC Checksum Offload disabled [ 89.346474] No MAC Management Counters available [ 89.352238] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready Listening on LPF/eth0/7a:e6:b9:59:d4:4c Sending on LPF/eth0/7a:e6:b9:59:d4:4c Sending on Socket/fallback DHCPREQUEST on eth0 to 255.255.255.255 port 67 DHCPREQUEST on eth0 to 255.255.255.255 port 67 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 4 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 8 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 9 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 11 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 19 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 8
[PYBOOT] [colombus 03:17]: Timed out waiting for "<type 'str'>":
[PYBOOT] [colombus 03:18]: got exception: timeout ~$off
[PYBOOT] [colombus 03:19]: Done. Board cosmic-arm-imx_v6_v7_defconfig failure log: -------------------------------------------------
[ 14.466961] blk_update_request: I/O error, dev mmcblk0, sector 3633185 [ 18.541203] mmcblk0: error -110 transferring data, sector 3633186, nr 230, cmd response 0x900, card status 0x0 [ 18.551522] blk_update_request: I/O error, dev mmcblk0, sector 3633186 [ 22.625703] mmcblk0: error -110 transferring data, sector 3633187, nr 229, cmd response 0x900, card status 0x0 [ 22.636020] blk_update_request: I/O error, dev mmcblk0, sector 3633187 [ 26.710263] mmcblk0: error -110 transferring data, sector 3633188, nr 228, cmd response 0x900, card status 0x0 [ 26.720591] blk_update_request: I/O error, dev mmcblk0, sector 3633188 [ 30.794775] mmcblk0: error -110 transferring data, sector 3633189, nr 227, cmd response 0x900, card status 0x0 [ 30.805098] blk_update_request: I/O error, dev mmcblk0, sector 3633189 [ 34.879332] mmcblk0: error -110 transferring data, sector 3633190, nr 226, cmd response 0x900, card status 0x0 [ 34.889660] blk_update_request: I/O error, dev mmcblk0, sector 3633190 [ 38.963840] mmcblk0: error -110 transferring data, sector 3633191, nr 225, cmd response 0x900, card status 0x0 [ 38.974170] blk_update_request: I/O error, dev mmcblk0, sector 3633191 [ 43.048567] mmcblk0: error -110 transferring data, sector 3633192, nr 224, cmd response 0x900, card status 0x0 [ 43.058892] blk_update_request: I/O error, dev mmcblk0, sector 3633192 [ 47.133180] mmcblk0: error -110 transferring data, sector 3633193, nr 223, cmd response 0x900, card status 0x0 [ 47.143494] blk_update_request: I/O error, dev mmcblk0, sector 3633193 [ 51.217728] mmcblk0: error -110 transferring data, sector 3633194, nr 222, cmd response 0x900, card status 0x0 [ 51.228073] blk_update_request: I/O error, dev mmcblk0, sector 3633194 [ 55.302403] mmcblk0: error -110 transferring data, sector 3633195, nr 221, cmd response 0x900, card status 0x0 [ 55.312724] blk_update_request: I/O error, dev mmcblk0, sector 3633195 [ 59.386954] mmcblk0: error -110 transferring data, sector 3633196, nr 220, cmd response 0x900, card status 0x0 [ 59.397278] blk_update_request: I/O error, dev mmcblk0, sector 3633196 [ 63.471508] mmcblk0: error -110 transferring data, sector 3633197, nr 219, cmd response 0x900, card status 0x0 [ 63.481831] blk_update_request: I/O error, dev mmcblk0, sector 3633197 [ 67.556097] mmcblk0: error -110 transferring data, sector 3633198, nr 218, cmd response 0x900, card status 0x0 [ 67.566420] blk_update_request: I/O error, dev mmcblk0, sector 3633198 [ 71.640642] mmcblk0: error -110 transferring data, sector 3633199, nr 217, cmd response 0x900, card status 0x0 [ 71.650963] blk_update_request: I/O error, dev mmcblk0, sector 3633199 [ 75.725146] mmcblk0: error -110 transferring data, sector 3633200, nr 216, cmd response 0x900, card status 0x0 [ 75.735466] blk_update_request: I/O error, dev mmcblk0, sector 3633200 [ 79.809690] mmcblk0: error -110 transferring data, sector 3633201, nr 215, cmd response 0x900, card status 0x0 [ 79.820011] blk_update_request: I/O error, dev mmcblk0, sector 3633201
[PYBOOT] [cosmic 01:58]: Timed out waiting for "<type 'str'>":
[PYBOOT] [cosmic 01:59]: got exception: timeout ~$off
[PYBOOT] [cosmic 02:00]: Done. Board cosmic-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 14.082793] blk_update_request: I/O error, dev mmcblk0, sector 3633185 [ 18.156782] mmcblk0: error -110 transferring data, sector 3633186, nr 230, cmd response 0x900, card status 0x0 [ 18.166863] blk_update_request: I/O error, dev mmcblk0, sector 3633186 [ 22.240848] mmcblk0: error -110 transferring data, sector 3633187, nr 229, cmd response 0x900, card status 0x0 [ 22.250922] blk_update_request: I/O error, dev mmcblk0, sector 3633187 [ 26.324903] mmcblk0: error -110 transferring data, sector 3633188, nr 228, cmd response 0x900, card status 0x0 [ 26.334983] blk_update_request: I/O error, dev mmcblk0, sector 3633188 [ 30.408973] mmcblk0: error -110 transferring data, sector 3633189, nr 227, cmd response 0x900, card status 0x0 [ 30.419051] blk_update_request: I/O error, dev mmcblk0, sector 3633189 [ 34.493046] mmcblk0: error -110 transferring data, sector 3633190, nr 226, cmd response 0x900, card status 0x0 [ 34.503143] blk_update_request: I/O error, dev mmcblk0, sector 3633190 [ 38.577142] mmcblk0: error -110 transferring data, sector 3633191, nr 225, cmd response 0x900, card status 0x0 [ 38.587210] blk_update_request: I/O error, dev mmcblk0, sector 3633191 [ 42.661199] mmcblk0: error -110 transferring data, sector 3633192, nr 224, cmd response 0x900, card status 0x0 [ 42.671270] blk_update_request: I/O error, dev mmcblk0, sector 3633192 [ 46.745259] mmcblk0: error -110 transferring data, sector 3633193, nr 223, cmd response 0x900, card status 0x0 [ 46.755330] blk_update_request: I/O error, dev mmcblk0, sector 3633193 [ 50.829317] mmcblk0: error -110 transferring data, sector 3633194, nr 222, cmd response 0x900, card status 0x0 [ 50.839389] blk_update_request: I/O error, dev mmcblk0, sector 3633194 [ 54.913379] mmcblk0: error -110 transferring data, sector 3633195, nr 221, cmd response 0x900, card status 0x0 [ 54.923449] blk_update_request: I/O error, dev mmcblk0, sector 3633195 [ 58.997438] mmcblk0: error -110 transferring data, sector 3633196, nr 220, cmd response 0x900, card status 0x0 [ 59.007510] blk_update_request: I/O error, dev mmcblk0, sector 3633196 [ 63.081497] mmcblk0: error -110 transferring data, sector 3633197, nr 219, cmd response 0x900, card status 0x0 [ 63.091569] blk_update_request: I/O error, dev mmcblk0, sector 3633197 [ 67.165552] mmcblk0: error -110 transferring data, sector 3633198, nr 218, cmd response 0x900, card status 0x0 [ 67.175630] blk_update_request: I/O error, dev mmcblk0, sector 3633198 [ 71.249613] mmcblk0: error -110 transferring data, sector 3633199, nr 217, cmd response 0x900, card status 0x0 [ 71.259688] blk_update_request: I/O error, dev mmcblk0, sector 3633199 [ 75.333678] mmcblk0: error -110 transferring data, sector 3633200, nr 216, cmd response 0x900, card status 0x0 [ 75.343758] blk_update_request: I/O error, dev mmcblk0, sector 3633200 [ 79.417749] mmcblk0: error -110 transferring data, sector 3633201, nr 215, cmd response 0x900, card status 0x0 [ 79.427826] blk_update_request: I/O error, dev mmcblk0, sector 3633201
[PYBOOT] [cosmic 02:07]: Timed out waiting for "<type 'str'>":
[PYBOOT] [cosmic 02:08]: got exception: timeout ~$off
[PYBOOT] [cosmic 02:09]: Done. Board cosmic-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
[ 13.877901] blk_update_request: I/O error, dev mmcblk0, sector 3633185 [ 17.951814] mmcblk0: error -110 transferring data, sector 3633186, nr 230, cmd response 0x900, card status 0x0 [ 17.961865] blk_update_request: I/O error, dev mmcblk0, sector 3633186 [ 22.035778] mmcblk0: error -110 transferring data, sector 3633187, nr 229, cmd response 0x900, card status 0x0 [ 22.045859] blk_update_request: I/O error, dev mmcblk0, sector 3633187 [ 26.119767] mmcblk0: error -110 transferring data, sector 3633188, nr 228, cmd response 0x900, card status 0x0 [ 26.129821] blk_update_request: I/O error, dev mmcblk0, sector 3633188 [ 30.203732] mmcblk0: error -110 transferring data, sector 3633189, nr 227, cmd response 0x900, card status 0x0 [ 30.213794] blk_update_request: I/O error, dev mmcblk0, sector 3633189 [ 34.287707] mmcblk0: error -110 transferring data, sector 3633190, nr 226, cmd response 0x900, card status 0x0 [ 34.297769] blk_update_request: I/O error, dev mmcblk0, sector 3633190 [ 38.371690] mmcblk0: error -110 transferring data, sector 3633191, nr 225, cmd response 0x900, card status 0x0 [ 38.381749] blk_update_request: I/O error, dev mmcblk0, sector 3633191 [ 42.455674] mmcblk0: error -110 transferring data, sector 3633192, nr 224, cmd response 0x900, card status 0x0 [ 42.465739] blk_update_request: I/O error, dev mmcblk0, sector 3633192 [ 46.539653] mmcblk0: error -110 transferring data, sector 3633193, nr 223, cmd response 0x900, card status 0x0 [ 46.549698] blk_update_request: I/O error, dev mmcblk0, sector 3633193 [ 50.623607] mmcblk0: error -110 transferring data, sector 3633194, nr 222, cmd response 0x900, card status 0x0 [ 50.633655] blk_update_request: I/O error, dev mmcblk0, sector 3633194 [ 54.707561] mmcblk0: error -110 transferring data, sector 3633195, nr 221, cmd response 0x900, card status 0x0 [ 54.717618] blk_update_request: I/O error, dev mmcblk0, sector 3633195 [ 58.791530] mmcblk0: error -110 transferring data, sector 3633196, nr 220, cmd response 0x900, card status 0x0 [ 58.801583] blk_update_request: I/O error, dev mmcblk0, sector 3633196 [ 62.875497] mmcblk0: error -110 transferring data, sector 3633197, nr 219, cmd response 0x900, card status 0x0 [ 62.885548] blk_update_request: I/O error, dev mmcblk0, sector 3633197 [ 66.959463] mmcblk0: error -110 transferring data, sector 3633198, nr 218, cmd response 0x900, card status 0x0 [ 66.969522] blk_update_request: I/O error, dev mmcblk0, sector 3633198 [ 71.043437] mmcblk0: error -110 transferring data, sector 3633199, nr 217, cmd response 0x900, card status 0x0 [ 71.053496] blk_update_request: I/O error, dev mmcblk0, sector 3633199 [ 75.127410] mmcblk0: error -110 transferring data, sector 3633200, nr 216, cmd response 0x900, card status 0x0 [ 75.137468] blk_update_request: I/O error, dev mmcblk0, sector 3633200 [ 79.211378] mmcblk0: error -110 transferring data, sector 3633201, nr 215, cmd response 0x900, card status 0x0 [ 79.221433] blk_update_request: I/O error, dev mmcblk0, sector 3633201
[PYBOOT] [cosmic 02:05]: Timed out waiting for "<type 'str'>":
[PYBOOT] [cosmic 02:06]: got exception: timeout ~$off
[PYBOOT] [cosmic 02:07]: Done. Board dalmore-arm-multi_lpae_defconfig failure log: -------------------------------------------------
[ 2.486597] Key type dns_resolver registered [ 2.493040] ThumbEE CPU extension supported. [ 2.497457] Registering SWP/SWPB emulation handler [ 2.535558] vdd-sys-5v0: supplied by vdd_ac_bat [ 2.542769] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 2.552520] vdd_hdmi_5v0: supplied by vdd-sys-5v0 [ 2.568207] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.575004] [drm] No driver support for vblank timestamp query. [ 2.589937] mmc1: new high speed MMC card at address 0001 [ 2.598701] mmcblk1: mmc1:0001 SEM32G 29.1 GiB [ 2.605228] mmcblk1boot0: mmc1:0001 SEM32G partition 1 4.00 MiB [ 2.613147] mmcblk1boot1: mmc1:0001 SEM32G partition 2 4.00 MiB [ 2.620498] mmcblk1rpmb: mmc1:0001 SEM32G partition 3 4.00 MiB [ 2.631006] mmcblk1: p1 [ 2.751840] Console: switching to colour frame buffer device 240x75 [ 2.839118] drm drm: fb0: frame buffer device [ 2.858875] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 2.868995] usb2_vbus: supplied by vdd-sys-5v0 [ 2.880645] tegra-ehci 7d008000.usb: EHCI Host Controller [ 2.886241] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 2.895003] tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 [ 2.908893] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 2.918336] hub 1-0:1.0: USB hub found [ 2.922426] hub 1-0:1.0: 1 port detected [ 2.933188] input: gpio-keys as /devices/soc0/gpio-keys/input/input0 [ 2.947851] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 3.011882] dvdd_ts: disabling [ 3.015097] usb1_vbus: disabling [ 3.018356] vdd_cam_1v8_reg: disabling [ 3.026054] Waiting for root device /dev/mmcblk0p1... [ 3.233893] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 4.212499] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f [ 49.228856] random: nonblocking pool is initialized
[PYBOOT] [dalmore 01:56]: Timed out waiting for "<type 'str'>":
[PYBOOT] [dalmore 01:57]: got exception: timeout ~$off
[PYBOOT] [dalmore 01:58]: Done. Board dalmore-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 2.486203] Key type dns_resolver registered [ 2.492617] ThumbEE CPU extension supported. [ 2.497033] Registering SWP/SWPB emulation handler [ 2.522644] vdd-sys-5v0: supplied by vdd_ac_bat [ 2.530532] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 2.541882] vdd_hdmi_5v0: supplied by vdd-sys-5v0 [ 2.557014] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.563797] [drm] No driver support for vblank timestamp query. [ 2.584801] mmc1: new high speed MMC card at address 0001 [ 2.595145] mmcblk1: mmc1:0001 SEM32G 29.1 GiB [ 2.603217] mmcblk1boot0: mmc1:0001 SEM32G partition 1 4.00 MiB [ 2.611879] mmcblk1boot1: mmc1:0001 SEM32G partition 2 4.00 MiB [ 2.619040] mmcblk1rpmb: mmc1:0001 SEM32G partition 3 4.00 MiB [ 2.630517] mmcblk1: p1 [ 2.741751] Console: switching to colour frame buffer device 240x75 [ 2.829046] drm drm: fb0: frame buffer device [ 2.848977] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 2.859092] usb2_vbus: supplied by vdd-sys-5v0 [ 2.870718] tegra-ehci 7d008000.usb: EHCI Host Controller [ 2.876325] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 2.885100] tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 [ 2.899008] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 2.909467] hub 1-0:1.0: USB hub found [ 2.913472] hub 1-0:1.0: 1 port detected [ 2.923573] input: gpio-keys as /devices/soc0/gpio-keys/input/input0 [ 2.937406] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 3.000539] dvdd_ts: disabling [ 3.003760] usb1_vbus: disabling [ 3.007018] vdd_cam_1v8_reg: disabling [ 3.014476] Waiting for root device /dev/mmcblk0p1... [ 3.224015] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 4.207219] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f [ 50.038971] random: nonblocking pool is initialized
[PYBOOT] [dalmore 01:53]: Timed out waiting for "<type 'str'>":
[PYBOOT] [dalmore 01:54]: got exception: timeout ~$off
[PYBOOT] [dalmore 01:56]: Done. Board dalmore-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
[ 2.031177] can: broadcast manager protocol (rev 20120528 t) [ 2.036933] can: netlink gateway (rev 20130117) max_hops=1 [ 2.043589] Key type dns_resolver registered [ 2.048703] ThumbEE CPU extension supported. [ 2.079404] vdd-sys-5v0: supplied by vdd_ac_bat [ 2.084330] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 2.094425] vdd_hdmi_5v0: supplied by vdd-sys-5v0 [ 2.114555] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.121221] [drm] No driver support for vblank timestamp query. [ 2.285300] Console: switching to colour frame buffer device 240x75 [ 2.371205] drm drm: fb0: frame buffer device [ 2.375817] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 2.383792] usb2_vbus: supplied by vdd-sys-5v0 [ 2.389798] mmc1: new high speed MMC card at address 0001 [ 2.398949] tegra-ehci 7d008000.usb: EHCI Host Controller [ 2.404524] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 2.412593] mmcblk1: mmc1:0001 SEM32G 29.1 GiB [ 2.417603] mmcblk1boot0: mmc1:0001 SEM32G partition 1 4.00 MiB [ 2.424357] tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 [ 2.430412] mmcblk1boot1: mmc1:0001 SEM32G partition 2 4.00 MiB [ 2.436780] mmcblk1rpmb: mmc1:0001 SEM32G partition 3 4.00 MiB [ 2.443531] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 2.450632] mmcblk1: p1 [ 2.455499] hub 1-0:1.0: USB hub found [ 2.463738] hub 1-0:1.0: 1 port detected [ 2.471883] input: gpio-keys as /devices/soc0/gpio-keys/input/input0 [ 2.483151] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 2.518589] dvdd_ts: disabling [ 2.521770] usb1_vbus: disabling [ 2.525056] vdd_cam_1v8_reg: disabling [ 2.530478] Waiting for root device /dev/mmcblk0p1... [ 2.774528] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 3.726774] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f
[PYBOOT] [dalmore 01:51]: Timed out waiting for "<type 'str'>":
[PYBOOT] [dalmore 01:52]: got exception: timeout ~$off
[PYBOOT] [dalmore 01:54]: Done. Board dalmore-arm-tegra_defconfig failure log: -------------------------------------------------
[ 2.655824] Bluetooth: RFCOMM ver 1.11 [ 2.659775] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 2.665170] Bluetooth: BNEP socket layer initialized [ 2.670268] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 2.676265] Bluetooth: HIDP socket layer initialized [ 2.683244] Key type dns_resolver registered [ 2.692890] Registering SWP/SWPB emulation handler [ 2.725350] vdd-sys-5v0: supplied by vdd_ac_bat [ 2.731835] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 2.742837] vdd_hdmi_5v0: supplied by vdd-sys-5v0 [ 2.766753] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.773582] [drm] No driver support for vblank timestamp query. [ 2.951575] Console: switching to colour frame buffer device 240x75 [ 3.038899] drm drm: fb0: frame buffer device [ 3.068735] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.075968] usb2_vbus: supplied by vdd-sys-5v0 [ 3.085338] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.091141] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 3.100245] tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 [ 3.119013] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 3.132493] hub 1-0:1.0: USB hub found [ 3.136460] hub 1-0:1.0: 1 port detected [ 3.150576] input: gpio-keys as /devices/soc0/gpio-keys/input/input1 [ 3.164677] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:01 UTC (946684801) [ 3.252819] dvdd_ts: disabling [ 3.255922] usb1_vbus: disabling [ 3.259307] vdd_cam_1v8_reg: disabling [ 3.263978] ALSA device list: [ 3.266971] #0: NVIDIA Tegra Dalmore [ 3.272842] Waiting for root device /dev/mmcblk0p1... [ 3.458733] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 4.493397] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f [ 63.148708] random: nonblocking pool is initialized
[PYBOOT] [dalmore 01:45]: Timed out waiting for "<type 'str'>":
[PYBOOT] [dalmore 01:46]: got exception: timeout ~$off
[PYBOOT] [dalmore 01:48]: Done. Board odroidu3-arm-exynos_defconfig failure log: -------------------------------------------------
[ 1.639835] dwmmc_exynos 12550000.mmc: DW MMC controller at irq 107,32 bit host data width,128 deep fifo [ 1.647388] usb 1-3: new high-speed USB device number 2 using exynos-ehci [ 1.656300] dwmmc_exynos 12550000.mmc: allocated mmc-pwrseq [ 1.687431] dwmmc_exynos 12550000.mmc: 1 slots initialized [ 1.688599] usbcore: registered new interface driver usbhid [ 1.693852] usbhid: USB HID core driver [ 1.702527] NET: Registered protocol family 10 [ 1.703151] sit: IPv6 over IPv4 tunneling driver [ 1.706356] NET: Registered protocol family 17 [ 1.710388] NET: Registered protocol family 15 [ 1.714843] Key type dns_resolver registered [ 1.719172] Registering SWP/SWPB emulation handler [ 1.724995] s3c-rtc 10070000.rtc: rtc disabled, re-enabling [ 1.729575] s3c-rtc 10070000.rtc: rtc core: registered s3c as rtc1 [ 1.756151] mmc_host mmc1: Bus speed (slot 0) = 44000000Hz (slot req 52000000Hz, actual 44000000HZ div = 0) [ 1.757946] max98090 1-0010: MAX98090 REVID=0x43 [ 1.760167] max98090 1-0010: use default 2.8v micbias [ 1.770214] mmc_host mmc1: Bus speed (slot 0) = 73333333Hz (slot req 52000000Hz, actual 36666666HZ div = 1) [ 1.780069] mmc1: new DDR MMC card at address 0001 [ 1.783079] asoc-simple-card sound: HiFi <-> 3830000.i2s mapping ok [ 1.786066] input: gpio_keys as /devices/platform/gpio_keys/input/input0 [ 1.797862] mmcblk1: mmc1:0001 008G92 7.28 GiB [ 1.802045] mmcblk1boot0: mmc1:0001 008G92 partition 1 4.00 MiB [ 1.807938] mmcblk1boot1: mmc1:0001 008G92 partition 2 4.00 MiB [ 1.813815] mmcblk1rpmb: mmc1:0001 008G92 partition 3 512 KiB [ 1.820374] mmcblk1: p1 p2 [ 1.830260] max77686-rtc max77686-rtc: setting system clock to 2000-01-01 01:00:19 UTC (946688419) [ 1.849486] VDD10_HDMI_1.0V: disabling [ 1.850177] vdd_g3d: disabling [ 1.851250] BUCK8_2.8V: disabling [ 1.85k270] ALSA device list: [ 1.856875] #0: Odroid-U3 [ 1.860565] Waiting for root device /dev/mmcblk0p2...
[PYBOOT] [odroidu3 01:51]: Timed out waiting for "<type 'str'>":
[PYBOOT] [odroidu3 01:52]: got exception: timeout ~$off
[PYBOOT] [odroidu3 01:53]: Done. Board omap5uevm-arm-multi_lpae_defconfig failure log: -------------------------------------------------
[ 2.006238] smsc95xx 1-3:1.0 eth0: register 'smsc95xx' at usb-4a064c00.ehci-3, smsc95xx USB 2.0 Ethernet, 7a:03:ea:20:e7:aa [ 2.036110] cpufreq: cpufreq_online: CPU0: Running at unlisted freq: 1100000 KHz [ 2.044017] cpufreq: cpufreq_online: CPU0: Unlisted initial frequency changed to: 1500000 KHz [ 2.056046] Unable to handle kernel NULL pointer dereference at virtual address 00000058 [ 2.064510] pgd = c0204000 [ 2.067337] [00000058] *pgd=00000000 [ 2.071082] Internal error: Oops: 805 [#1] SMP ARM [ 2.076093] Modules linked in: [ 2.079289] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.6.0-rc6-00149-g7270a3f #1 [ 2.087116] Hardware name: Generic OMAP5 (Flattened Device Tree) [ 2.093390] task: c1306a80 ti: c1300000 task.ti: c1300000 [ 2.099030] PC is at common_timer_get+0x44/0x148 [ 2.103855] LR is at div_s64_rem+0xe4/0xec [ 2.108131] pc : [<c0396050>] lr : [<c0596f14>] psr: a0000193 [ 2.108131] sp : c1301ee8 ip : 00000000 fp : eefc9ec8 [ 2.120133] r10: c1301ef8 r9 : fa213000 r8 : ee008000 [ 2.125596] r7 : 00000001 r6 : 00000000 r5 : 00000058 r4 : eefc9e90 [ 2.132413] r3 : 21150c00 r2 : e6c97833 r1 : 21150c00 r0 : e6c97832 [ 2.139236] Flags: NzCv IRQs off FIQs on Mode SVC_32 ISA ARM Segment none [ 2.146783] Control: 10c5387d Table: 8020406a DAC: 00000051 [ 2.152785] Process swapper/0 (pid: 0, stack limit = 0xc1300220) [ 2.159055] Stack: (0xc1301ee8 to 0xc1302000) [ 2.163607] 1ee0: c130250c c038448c ee182240 c130afe8 e6c97832 21150c00 [ 2.172161] 1f00: 00000058 00000000 00000001 c0345564 c12054cc c0383ce4 c1302880 c1340078 [ 2.180706] 1f20: fa21200c c1301f50 fa212000 c0301798 c0308740 a0000013 ffffffff c1301f84 [ 2.189249] 1f40: c12075c0 c1302504 c140dee8 c030c494 00000001 00000000 ea000013 f0880000 [ 2.197792] 1f60: c1300000 c13024a4 00000000 00000000 c12075c0 c1302504 c140dee8 c130250c [ 2.206337] 1f80: 60000013 c1301fa0 c032aee0 c0308740 a0000013 ffffffff 00000051 c030873c [ 2.214884] 1fa0: c1300000 c03781e0 c1301fb4 c1301fa8 00000000 ffffffff 00000000 c1100c4c [ 2.223432] 1fc0: ffffffff ffffffff 00000000 c1100684 00000000 c11a3a30 c14105d4 c1302480 [ 2.231975] 1fe0: c11a3a2c c1307c4c 8020406a 412fc0f2 00000000 8020807c 00000000 00000000 [ 2.240523] [<c0396050>] (common_timer_get) from [<c1301f50>] (0xc1301f50) [ 2.247706] Code: e1a03009 e1a0000a ebfff101 e89a0003 (e8850003) [ 2.254074] ---[ end trace 9d6297402c45fe08 ]--- [ 2.258896] Kernel panic - not syncing: Fatal exception in interrupt
[PYBOOT] [omap5uevm 00:50]: got exception: panic ~$off
[PYBOOT] [omap5uevm 00:51]: Done. Board omap5uevm-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.935017] mmcblk0: mmc0:0001 SEM04G 3.69 GiB [ 1.940026] mmcblk0boot0: mmc0:0001 SEM04G partition 1 2.00 MiB [ 1.946386] mmcblk0boot1: mmc0:0001 SEM04G partition 2 2.00 MiB [ 1.962135] smsc95xx v1.0.4 [ 1.982512] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 2.005069] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 2.013811] smsc95xx 1-3:1.0 eth0: register 'smsc95xx' at usb-4a064c00.ehci-3, smsc95xx USB 2.0 Ethernet, 5e:bc:5a:39:17:35 [ 2.056122] cpufreq: cpufreq_online: CPU0: Running at unlisted freq: 1100000 KHz [ 2.064027] cpufreq: cpufreq_online: CPU0: Unlisted initial frequency changed to: 1500000 KHz [ 2.077722] Unable to handle kernel NULL pointer dereference at virtual address 00000014 [ 2.086191] pgd = c0204000 [ 2.089019] [00000014] *pgd=00000000 [ 2.092761] Internal error: Oops: 5 [#1] SMP ARM [ 2.097589] Modules linked in: [ 2.100785] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.6.0-rc6-00149-g7270a3f #1 [ 2.108617] Hardware name: Generic OMAP5 (Flattened Device Tree) [ 2.114904] task: c1306a80 ti: c1300000 task.ti: c1300000 [ 2.120555] PC is at __irq_wake_thread+0x0/0x68 [ 2.125292] LR is at handle_irq_event_percpu+0x74/0x14c [ 2.130760] pc : [<c0384294>] lr : [<c0384370>] psr: a0000193 [ 2.130760] sp : c1301eb8 ip : 7340002f fp : c0ee2e38 [ 2.142777] r10: c140deea r9 : ee182240 r8 : 00000129 [ 2.148242] r7 : 00000000 r6 : 00000000 r5 : 00000002 r4 : ee64d7c0 [ 2.155074] r3 : 00000000 r2 : 0000601f r1 : 00000000 r0 : 00000002 [ 2.161903] Flags: NzCv IRQs off FIQs on Mode SVC_32 ISA ARM Segment none [ 2.169462] Control: 10c5387d Table: 8020406a DAC: 00000051 [ 2.175472] Process swapper/0 (pid: 0, stack limit = 0xc1300220) [ 2.181755] Stack: (0xc1301eb8 to 0xc1302000) [ 2.186310] 1ea0: 77359400 c130250c [ 2.194867] 1ec0: 00000000 c0ee2e60 00000000 ee182240 ee1822a0 00000000 00000001 ee008000 [ 2.203427] 1ee0: fa213000 c140dee8 c130250c c038448c ee182240 c130afe8 00000000 c03876c8 [ 2.211986] 1f00: c12054cc 00000000 00000000 c0383a64 c12054cc c0383d14 c1302880 c1340078 [ 2.220546] 1f20: fa21200c c1301f50 fa212000 c0301798 c0308740 a0000013 ffffffff c1301f84 [ [PYBOOT] [omap5uevm 02:07]: Timed out waiting for "<type 'str'>":
[PYBOOT] [omap5uevm 02:08]: got exception: timeout ~$off
[PYBOOT] [omap5uevm 02:09]: Done. Board omap5uevm-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
[ 50.719224] [<c030bc60>] (__dabt_svc) from [<c034de40>] (kthread_data+0x4/0xc) [ 50.726790] [<c034de40>] (kthread_data) from [<c0349ab4>] (wq_worker_sleeping+0x8/0xb8) [ 50.735167] [<c0349ab4>] (wq_worker_sleeping) from [<c0a8eab8>] (__schedule+0x31c/0x470) [ 50.743645] [<c0a8eab8>] (__schedule) from [<c0a8ec50>] (schedule+0x44/0x9c) [ 50.751031] [<c0a8ec50>] (schedule) from [<c0337640>] (do_exit+0x7b4/0x908) [ 50.758321] [<c0337640>] (do_exit) from [<c030b5c4>] (die+0x328/0x394) [ 50.765154] [<c030b5c4>] (die) from [<c031a290>] (__do_kernel_fault.part.0+0x64/0x1e4) [ 50.773448] [<c031a290>] (__do_kernel_fault.part.0) from [<c0315580>] (do_page_fault+0x370/0x384) [ 50.782743] [<c0315580>] (do_page_fault) from [<c030125c>] (do_DataAbort+0x3c/0xb8) [ 50.790762] [<c030125c>] (do_DataAbort) from [<c030bc60>] (__dabt_svc+0x40/0x60) [ 50.798505] Exception stack(0xee4fae60 to 0xee4faea8) [ 50.803789] ae60: ee482200 00000000 ffffffff 00000000 ee482200 00000000 c1035a08 00000000 [ 50.812351] ae80: ee48242c c0a8ec50 c034de42 ee4faef4 ee483338 ee4faeb0 c0349ab4 c034de40 [ 50.820922] aea0: 20000193 ffffffff [ 50.824570] [<c030bc60>] (__dabt_svc) from [<c034de40>] (kthread_data+0x4/0xc) [ 50.832131] [<c034de40>] (kthread_data) from [<c0349ab4>] (wq_worker_sleeping+0x8/0xb8) [ 50.840515] [<c0349ab4>] (wq_worker_sleeping) from [<c0a8eab8>] (__schedule+0x31c/0x470) [ 50.848989] [<c0a8eab8>] (__schedule) from [<c0a8ec50>] (schedule+0x44/0x9c) [ 50.856365] [<c0a8ec50>] (schedule) from [<c0337640>] (do_exit+0x7b4/0x908) [ 50.863651] [<c0337640>] (do_exit) from [<c030b5c4>] (die+0x328/0x394) [ 50.870486] [<c030b5c4>] (die) from [<c031a290>] (__do_kernel_fault.part.0+0x64/0x1e4) [ 50.878777] [<c031a290>] (__do_kernel_fault.part.0) from [<c0315580>] (do_page_fault+0x370/0x384) [ 50.888066] [<c0315580>] (do_page_fault) from [<c030125c>] (do_DataAbort+0x3c/0xb8) [ 50.896082] [<c030125c>] (do_DataAbort) from [<c030bc60>] (__dabt_svc+0x40/0x60) [ 50.903823] Exception stack(0xee4fb090 to 0xee4fb0d8) [ 50.909102] b080: ee482200 00000000 ffffffff 00000000 [ 50.917671] b0a0: ee482200 00000000 c1035a08 00000000 ee48242c c0a8ec50 c034de42 ee4fb124 [ 50.926229] b0c0: ee483338 ee4fb0e0 c0349ab4 c034de40 20000193 ffffffff [ 50.933146] [<c030bc60>] (__dabt_svc) from [<c034de40>] (kthread_data+0x4/0xc) [ 50.940716] [<c034de40>] (kthread_data) from [<c0349ab4>] (wq_worker_sleeping+0x8/0xb8) [ 50.949093] [<c0349ab4>] (wq_worker_sleeping) from [<c0a8eab8>] (__schedule+0x31c/0x470) [ 50.957567] [<c0a8eab8>] (__schedule) from [<c0a8ec50>] (schedule+0x44/0x9c) [ 50.964949] [<c0a8ec50>] (schedule) from [<c0337640>] (do_exit+0x7b4/0x908) [ 50.972236] [<c0337640>] (do_exit) from [<c030b5c4>] (die+0x328/0x394) [ 50.979070] [<c030b5c4>] (die) from [<c031a290>] (__do_kernel_fault.part.0+0x64/0x1e4) [ 50.987360] [<c031a290>] (__do_kernel_fault.part.0) from [<c0315580>] (do_page_fault+0 [PYBOOT] [omap5uevm 01:38]: got exception: panic ~$off
[PYBOOT] [omap5uevm 01:39]: Done. Board seaboard-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.657099] vdd_ldo7,avdd_hdmi,vdd_fuse: supplied by vdd_sm2,vin_ldo* [ 1.667607] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 1.674083] tegra-ehci c5000000.usb: EHCI Host Controller [ 1.679506] tegra-ehci c5000000.usb: new USB bus registered, assigned bus number 3 [ 1.687973] tegra-ehci c5000000.usb: irq 287, io mem 0xc5000000 [ 1.699887] mmc2: switch to bus width 8 failed [ 1.704438] tegra-ehci c5000000.usb: USB 2.0 started, EHCI 1.00 [ 1.711072] mmc2: switch to bus width 4 failed [ 1.715582] mmc2: new high speed MMC card at address 0001 [ 1.715921] hub 3-0:1.0: USB hub found [ 1.715975] hub 3-0:1.0: 1 port detected [ 1.730820] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.730937] mmcblk2: mmc2:0001 MMC08G 7.46 GiB [ 1.733402] mmcblk2boot0: mmc2:0001 MMC08G partition 1 512 KiB [ 1.733897] mmcblk2boot1: mmc2:0001 MMC08G partition 2 512 KiB [ 1.753447] mmc0: queuing unknown CIS tuple 0x80 (50 bytes) [ 1.759210] [drm] No driver support for vblank timestamp query. [ 1.761314] mmc0: queuing unknown CIS tuple 0x80 (7 bytes) [ 1.764154] mmc0: queuing unknown CIS tuple 0x80 (7 bytes) [ 1.771431] mmc0: queuing unknown CIS tuple 0x80 (19 bytes) [ 1.782763] mmcblk2: p3 [ 1.793709] mmc0: queuing unknown CIS tuple 0x02 (1 bytes) [ 1.804374] mmc0: new SDIO card at address 0001 [ 1.890407] Console: switching to colour frame buffer device 170x48 [ 1.913516] drm drm: fb0: frame buffer device [ 1.928583] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 1.935361] input: gpio-keys as /devices/soc0/gpio-keys/input/input2 [ 1.942437] tps6586x-rtc tps6586x-rtc: setting system clock to 2009-01-01 00:00:00 UTC (1230768000) [ 1.956725] vdd_1v5: disabling [ 1.959808] vdd_1v2: disabling [ 2.546889] asix 2-1:1.0 eth0: register 'asix' at usb-c5008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, c0:c1:c0:13:08:60 [ 2.558301] Waiting for root device /dev/mmcblk0p3... [ 58.368695] random: nonblocking pool is initialized
[PYBOOT] [seaboard 01:56]: Timed out waiting for "<type 'str'>":
[PYBOOT] [seaboard 01:57]: got exception: timeout ~$off
[PYBOOT] [seaboard 01:58]: Done. Board seaboard-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
[ 1.606972] vdd_ldo8,avdd_hdmi_pll: supplied by vdd_sm2,vin_ldo* [ 1.613310] vdd_ldo7,avdd_hdmi,vdd_fuse: supplied by vdd_sm2,vin_ldo* [ 1.623229] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 1.629677] tegra-ehci c5000000.usb: EHCI Host Controller [ 1.635089] tegra-ehci c5000000.usb: new USB bus registered, assigned bus number 3 [ 1.642845] tegra-ehci c5000000.usb: irq 287, io mem 0xc5000000 [ 1.658184] tegra-ehci c5000000.usb: USB 2.0 started, EHCI 1.00 [ 1.664654] hub 3-0:1.0: USB hub found [ 1.668500] hub 3-0:1.0: 1 port detected [ 1.679022] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.685634] [drm] No driver support for vblank timestamp query. [ 1.692476] mmc2: switch to bus width 8 failed [ 1.697171] mmc2: switch to bus width 4 failed [ 1.701647] mmc2: new high speed MMC card at address 0001 [ 1.707357] mmcblk2: mmc2:0001 MMC08G 7.46 GiB [ 1.719351] mmcblk2boot0: mmc2:0001 MMC08G partition 1 512 KiB [ 1.725717] mmcblk2boot1: mmc2:0001 MMC08G partition 2 512 KiB [ 1.727059] mmcblk2: p3 [ 1.741534] mmc0: queuing unknown CIS tuple 0x80 (50 bytes) [ 1.749115] mmc0: queuing unknown CIS tuple 0x80 (7 bytes) [ 1.751848] mmc0: queuing unknown CIS tuple 0x80 (7 bytes) [ 1.758813] mmc0: queuing unknown CIS tuple 0x80 (19 bytes) [ 1.779225] Console: switching to colour frame buffer device 170x48 [ 1.827382] drm drm: fb0: frame buffer device [ 1.831856] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 1.838275] input: gpio-keys as /devices/soc0/gpio-keys/input/input2 [ 1.845141] tps6586x-rtc tps6586x-rtc: setting system clock to 2009-01-01 00:00:00 UTC (1230768000) [ 1.856711] vdd_1v5: disabling [ 1.859791] vdd_1v2: disabling [ 1.868710] mmc0: queuing unknown CIS tuple 0x02 (1 bytes) [ 1.877211] mmc0: new SDIO card at address 0001 [ 2.552376] asix 2-1:1.0 eth0: register 'asix' at usb-c5008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, c0:c1:c0:13:08:60 [ 2.563226] Waiting for root device /dev/mmcblk0p3...
[PYBOOT] [seaboard 01:51]: Timed out waiting for "<type 'str'>":
[PYBOOT] [seaboard 01:52]: got exception: timeout ~$off
[PYBOOT] [seaboard 01:53]: Done. Board seaboard-arm-tegra_defconfig failure log: -------------------------------------------------
[ 1.668581] Bluetooth: RFCOMM ver 1.11 [ 1.672379] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 1.677710] Bluetooth: BNEP socket layer initialized [ 1.682706] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 1.688650] Bluetooth: HIDP socket layer initialized [ 1.694231] Key type dns_resolver registered [ 1.699714] Registering SWP/SWPB emulation handler [ 1.715463] tegra-dc 54200000.dc: failed to probe RGB output: -517 [ 1.722259] VDDIO_HDMI: supplied by vdd_5v0 [ 1.726715] vdd_sys: supplied by vdd_5v0 [ 1.730726] vdd_sm2,vin_ldo*: supplied by vdd_sys [ 1.735763] vdd_ldo8,avdd_hdmi_pll: supplied by vdd_sm2,vin_ldo* [ 1.742353] vdd_ldo7,avdd_hdmi,vdd_fuse: supplied by vdd_sm2,vin_ldo* [ 1.752450] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 1.758900] tegra-ehci c5000000.usb: EHCI Host Controller [ 1.764341] tegra-ehci c5000000.usb: new USB bus registered, assigned bus number 3 [ 1.772262] tegra-ehci c5000000.usb: irq 287, io mem 0xc5000000 [ 1.791438] tegra-ehci c5000000.usb: USB 2.0 started, EHCI 1.00 [ 1.799425] hub 3-0:1.0: USB hub found [ 1.803247] hub 3-0:1.0: 1 port detected [ 1.813743] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.820356] [drm] No driver support for vblank timestamp query. [ 1.911864] Console: switching to colour frame buffer device 170x48 [ 1.929368] drm drm: fb0: frame buffer device [ 1.961438] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 1.968471] input: gpio-keys as /devices/soc0/gpio-keys/input/input4 [ 1.976299] tps6586x-rtc tps6586x-rtc: setting system clock to 2009-01-01 00:00:00 UTC (1230768000) [ 1.994647] vdd_1v5: disabling [ 1.997697] vdd_1v2: disabling [ 2.000857] ALSA device list: [ 2.003839] #0: NVIDIA Tegra Seaboard [ 2.329327] asix 2-1:1.0 eth0: register 'asix' at usb-c5008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, c0:c1:c0:13:08:60 [ 2.340443] Waiting for root device /dev/mmcblk0p3...
[PYBOOT] [seaboard 01:46]: Timed out waiting for "<type 'str'>":
[PYBOOT] [seaboard 01:47]: got exception: timeout ~$off
[PYBOOT] [seaboard 01:48]: Done. Board snow-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
[....] Waiting for /dev to be fully populated...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Activating swap...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [ 3.088923] EXT4-fs (mmcblk0p3): warning: mounting fs with errors, running e2fsck is recommended [ 3.097273] EXT4-fs (mmcblk0p3): re-mounted. Opts: (null) [....] Cleaning up temporary files... /tmp[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] Activating lvm and md swap...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Checking file systems...fsck from util-linux 2.20.1 [?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Mounting local filesystems...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Activating swapfile swap...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Cleaning up temporary files...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] Setting kernel variables ...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [ 4.127369] random: dd urandom read with 57 bits of entropy available [....] Configuring network interfaces...Internet Systems Consortium DHCP Client 4.2.2 Copyright 2004-2011 Internet Systems Consortium. All rights reserved. For info, please visit https://www.isc.org/software/dhcp/
Cannot find device "eth0" Bind socket to interface: No such device Failed to bring up eth0. [?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Cleaning up temporary files...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. INIT: Entering runlevel: 2 [[36minfo[39;49m] Using makefile-style concurrent boot in runlevel 2. [....] Starting enhanced syslogd: rsyslogd[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] Starting web server: apache2apache2: Could not reliably determine the server's fully qualified domain name, using 127.0.0.1 for ServerName [?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] Starting periodic command scheduler: cron[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] Starting system message bus: dbus[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] Loading cpufreq kernel modules...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone (none). [....] CPUFreq Utilities: Setting ondemand CPUFreq governor...CPU0...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Starting OpenBSD Secure Shell server: sshd[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c.
[PYBOOT] [snow 03:10]: Timed out waiting for "<type 'str'>":
[PYBOOT] [snow 03:11]: got exception: timeout ~$off
[PYBOOT] [snow 03:12]: Done. Board snowball-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.965850] can: controller area network core (rev 20120528 abi 9) [ 1.972167] NET: Registered protocol family 29 [ 1.976684] can: raw protocol (rev 20120528) [ 1.980987] can: broadcast manager protocol (rev 20120528 t) [ 1.986694] can: netlink gateway (rev 20130117) max_hops=1 [ 1.993133] Key type dns_resolver registered [ 1.997802] ThumbEE CPU extension supported. [ 2.002136] Registering SWP/SWPB emulation handler [ 2.010009] input: gpio_keys as /devices/soc0/gpio_keys/input/input0 [ 2.016784] rtc-pl031 80154000.rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 2.026000] thermal cooling_device0: thermal-cpufreq-0 bind to 0: 0-succeed [ 2.033020] thermal cooling_device0: thermal-cpufreq-0 bind to 1: 0-succeed [ 2.040039] thermal cooling_device0: thermal-cpufreq-0 bind to 2: 0-succeed [ 2.047027] db8500-cpufreq-cooling soc:cpufreq-cooling: Cooling device registered: thermal-cpufreq-0 [ 2.060394] db8500-esram12: disabling [ 2.064208] db8500-esram34: disabling [ 2.068145] V-CSI/DSI: disabling [ 2.071411] mmci-reg: disabling [ 2.075134] uart-pl011 80007000.uart: DMA channel TX dma0chan20 [ 2.081146] uart-pl011 80007000.uart: DMA channel RX dma0chan21 [ 2.087493] Waiting for root device /dev/mmcblk0p4... [ 2.101501] mmc3: new high speed MMC card at address 0001 [ 2.107666] mmcblk3: mmc3:0001 3.53 GiB [ 2.112091] mmcblk3boot0: mmc3:0001 partition 1 2.00 MiB [ 2.117889] mmcblk3boot1: mmc3:0001 partition 2 2.00 MiB [ 2.123687] mmcblk3rpmb: mmc3:0001 partition 3 128 KiB [ 2.130493] mmcblk3: p1 p2 p3 p4 Connected. cu: Got hangup signal cu: waitpid: No child processes Connected.
Disconnected.
[PYBOOT] [snowball 02:12]: Timed out waiting for "<type 'str'>":
[PYBOOT] [snowball 02:13]: got exception: timeout ~$off
[PYBOOT] [snowball 02:15]: Done. Board snowball-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
[ 1.852081] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.859619] ledtrig-cpu: registered to indicate activity on CPUs [ 1.865875] usbcore: registered new interface driver usbhid [ 1.871429] usbhid: USB HID core driver [ 1.878692] NET: Registered protocol family 10 [ 1.884185] sit: IPv6 over IPv4 tunneling driver [ 1.889343] NET: Registered protocol family 17 [ 1.893829] can: controller area network core (rev 20120528 abi 9) [ 1.900054] NET: Registered protocol family 29 [ 1.904510] can: raw protocol (rev 20120528) [ 1.908782] can: broadcast manager protocol (rev 20120528 t) [ 1.914459] can: netlink gateway (rev 20130117) max_hops=1 [ 1.920379] Key type dns_resolver registered [ 1.924835] ThumbEE CPU extension supported. [ 1.937499] input: gpio_keys as /devices/soc0/gpio_keys/input/input0 [ 1.944213] rtc-pl031 80154000.rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 1.953308] thermal cooling_device0: thermal-cpufreq-0 bind to 0: 0-succeed [ 1.960327] thermal cooling_device0: thermal-cpufreq-0 bind to 1: 0-succeed [ 1.967285] thermal cooling_device0: thermal-cpufreq-0 bind to 2: 0-succeed [ 1.974273] db8500-cpufreq-cooling soc:cpufreq-cooling: Cooling device registered: thermal-cpufreq-0 [ 1.985961] db8500-esram12: disabling [ 1.989746] db8500-esram34: disabling [ 1.993682] V-CSI/DSI: disabling [ 1.996948] mmci-reg: disabling [ 2.000610] uart-pl011 80007000.uart: DMA channel TX dma0chan20 [ 2.006591] uart-pl011 80007000.uart: DMA channel RX dma0chan21 [ 2.013824] Waiting for root device /dev/mmcblk0p4... [ 2.049652] mmc3: new high speed MMC card at address 0001 [ 2.055450] mmcblk3: mmc3:0001 3.53 GiB [ 2.059692] mmcblk3boot0: mmc3:0001 partition 1 2.00 MiB [ 2.065216] mmcblk3boot1: mmc3:0001 partition 2 2.00 MiB [ 2.070709] mmcblk3rpmb: mmc3:0001 partition 3 128 KiB [ 2.077026] mmcblk3: p1 p2 p3 p4
[PYBOOT] [snowball 01:58]: Timed out waiting for "<type 'str'>":
[PYBOOT] [snowball 01:59]: got exception: timeout ~$off
[PYBOOT] [snowball 02:00]: Done. Board snowball-arm-u8500_defconfig failure log: -------------------------------------------------
[ 2.659210] ux500-msp-i2s ux500-msp-i2s.1: Failed to get DMA channel capabilities, falling back to period counting: -6 [ 2.669952] snd-soc-mop500 snd-soc-mop500.0: ab8500-codec-dai.0 <-> ux500-msp-i2s.1 mapping ok [ 2.680023] ux500-msp-i2s ux500-msp-i2s.3: Failed to get DMA channel capabilities, falling back to period counting: -6 [ 2.690734] snd-soc-mop500 snd-soc-mop500.0: ab8500-codec-dai.1 <-> ux500-msp-i2s.3 mapping ok [ 2.714324] NET: Registered protocol family 10 [ 2.719696] sit: IPv6 over IPv4 tunneling driver [ 2.725128] NET: Registered protocol family 17 [ 2.729614] NET: Registered protocol family 35 [ 2.734161] NET: Registered protocol family 37 [ 2.738708] Registering SWP/SWPB emulation handler [ 2.744934] coresight-etm3x 801ae000.ptm: PTM 1.0 initialized [ 2.751342] coresight-etm3x 801af000.ptm: PTM 1.0 initialized [ 2.758026] input: gpio_keys as /devices/soc0/gpio_keys/input/input1 [ 2.770660] ab8500-rtc ab8500-rtc.0: setting system clock to 2000-04-17 00:20:04 UTC (955930804) [ 2.780273] thermal cooling_device0: thermal-cpufreq-0 bind to 0: 0-succeed [ 2.787292] thermal cooling_device0: thermal-cpufreq-0 bind to 1: 0-succeed [ 2.794464] thermal cooling_device0: thermal-cpufreq-0 bind to 2: 0-succeed [ 2.801513] db8500-cpufreq-cooling soc:cpufreq-cooling: Cooling device registered: thermal-cpufreq-0 [ 2.814971] db8500-esram12: disabling [ 2.818756] db8500-esram34: disabling [ 2.822723] V-CSI/DSI: disabling [ 2.825988] mmci-reg: disabling [ 2.829284] ALSA device list: [ 2.832305] #0: MOP500-card [ 2.835632] uart-pl011 80007000.uart: DMA channel TX dma0chan24 [ 2.841674] uart-pl011 80007000.uart: DMA channel RX dma0chan25 [ 2.847839] Waiting for root device /dev/mmcblk0p4... cu: Got hangup signal Connected. cu: waitpid: No child processes
[PYBOOT] [snowball 01:52]: Timed out waiting for "<type 'str'>": Connected.
Disconnected.
[PYBOOT] [snowball 01:53]: got exception: timeout ~$off
[PYBOOT] [snowball 01:55]: Done. Board wandboard-arm-imx_v6_v7_defconfig failure log: -------------------------------------------------
INIT: INIT: cannot ex[ 20.072592] mmcblk0: error -110 sending status command, retrying ecute "/sbin/getty"cannot execute[ 20.081512] mmcblk0: error -110 sending status command, aborting "/sbin/getty"
INIT: Id "4" respawning too fast: disabled f[ 20.093372] mmcblk0: error -110 sending status command, retrying or 5 minutes INIT: Id "5" resp[ 20.102043] mmcblk0: error -110 sending status command, retrying awning too fast: disabled for 5 m[ 20.110838] mmcblk0: error -110 sending status command, aborting inutes INIT: cannot execute "/sbin/getty" [ 20.122357] mmcblk0: error -110 sending status command, retrying [ 20.130832] mmcblk0: error -110 sending status command, retrying [ 20.139292] mmcblk0: error -110 sending status command, aborting [ 20.150307] mmcblk0: error -110 sending status command, retrying [ 20.158758] mmcblk0: error -110 sending status command, retrying [ 20.167215] mmcblk0: error -110 sending status command, aborting [ 20.178209] mmcblk0: error -110 sending status command, retrying [ 20.186645] mmcblk0: error -110 sending status command, retrying [ 20.195094] mmcblk0: error -110 sending status command, aborting INIT: cannot execute "/sbin/getty" INIT: cannot execute "/sbin/getty" INIT: INIT: cannot execute "/sbin/getty"cannot execute "/sbin/getty"Id "2" respawning too fast: disabled for 5 minutes
INIT: Id "6" respawning too fast: disabled for 5 minutes INIT: Id "3" respawning too fast: disabled for 5 minutes [ 20.260331] mmcblk0: error -110 sending status command, retrying [ 20.268791] mmcblk0: error -110 sending status command, retrying [ 20.277242] mmcblk0: error -110 sending status command, aborting INIT: cannot execute "/sbin/getty" INIT: Id "S1" respawning too fast: disabled for 5 minutes INIT: no more processes left in this runlevel [ 49.445193] random: nonblocking pool is initialized
[PYBOOT] [wandboard 02:56]: Timed out waiting for "<type 'str'>":
[PYBOOT] [wandboard 02:57]: got exception: timeout ~$off
[PYBOOT] [wandboard 02:58]: Done.