Full logs are available at http://arm-soc.lixom.net/bootlogs/next/next-20160505/
Failed boards:
arndale arm-multi_v7_nosmp_defconfig : FAILED 2:26.59 bbb arm-omap2plus_defconfig : FAILED 1:53.56 bbb arm-multi_v7_defconfig : FAILED 1:54.04 bbb arm-multi_v7_nosmp_defconfig : FAILED 2:08.20 beagleboard-x15 arm-omap2plus_defconfig : FAILED 1:45.68 beagleboard-x15 arm-multi_v7_defconfig : FAILED 1:43.75 beagleboard-x15 arm-multi_lpae_defconfig : FAILED 1:51.24 beagleboard-x15 arm-multi_v7_nosmp_defconfig : FAILED 2:05.20 chitra powerpc-pasemi_defconfig : BUILD FAILED colombus arm-multi_v7_nosmp_defconfig : FAILED 3:19.95 cosmic arm-imx_v6_v7_defconfig : FAILED 2:01.72 cosmic arm-multi_v7_defconfig : FAILED 2:10.08 cosmic arm-multi_v7_nosmp_defconfig : FAILED 2:13.11 dalmore arm-tegra_defconfig : FAILED 1:53.54 dalmore arm-multi_v7_defconfig : FAILED 1:56.62 dalmore arm-multi_lpae_defconfig : FAILED 2:14.97 dalmore arm-multi_v7_nosmp_defconfig : FAILED 1:52.47 minnowmax minnowmax_defconfig : NO BUILD odroidu3 arm-exynos_defconfig : FAILED 1:53.94 omap5uevm arm-omap2plus_defconfig : FAILED 2:05.51 omap5uevm arm-multi_v7_defconfig : FAILED 2:07.30 omap5uevm arm-multi_lpae_defconfig : FAILED 2:11.12 pi arm-multi_lpae_defconfig : FAILED 2:09.33 seaboard arm-tegra_defconfig : FAILED 1:53.71 seaboard arm-multi_v7_defconfig : FAILED 1:57.93 seaboard arm-multi_v7_nosmp_defconfig : FAILED 1:52.02 snowball arm-u8500_defconfig : FAILED 1:57.77 snowball arm-multi_v7_defconfig : FAILED 2:28.22 snowball arm-multi_v7_nosmp_defconfig : FAILED 1:59.76
Successful boards:
apc arm-vt8500_v6_v7_defconfig : passed 1:15.36 arndale arm-exynos_defconfig : passed 1:31.07 arndale arm-multi_v7_defconfig : passed 1:18.00 arndale arm-multi_lpae_defconfig : passed 1:32.21 capri arm-bcm_defconfig : passed 0:50.25 capri arm-multi_v7_defconfig : passed 0:52.48 capri arm-multi_v7_nosmp_defconfig : warnings 1:02.71 chitra powerpc-ppc64_defconfig : passed 2:08.38 colombus arm-sunxi_defconfig : passed 2:26.58 colombus arm-multi_v7_defconfig : passed 2:50.13 colombus arm-multi_lpae_defconfig : passed 2:29.60 cubie arm-sunxi_defconfig : passed 0:51.01 cubie arm-multi_v7_defconfig : passed 0:52.58 cubie arm-multi_v7_nosmp_defconfig : passed 1:00.74 cubie2 arm-sunxi_defconfig : passed 0:58.45 cubie2 arm-multi_v7_defconfig : passed 0:53.78 cubie2 arm-multi_lpae_defconfig : passed 0:56.90 cubie2 arm-multi_v7_nosmp_defconfig : warnings 0:58.01 cubox arm-multi_v7_defconfig : passed 1:13.58 cubox arm-mvebu_v7_defconfig : passed 1:14.28 cubox arm-multi_v7_nosmp_defconfig : passed 1:23.35 hummingboard arm-imx_v6_v7_defconfig : passed 1:33.41 hummingboard arm-multi_v7_defconfig : passed 1:39.23 hummingboard arm-multi_v7_nosmp_defconfig : warnings 1:09.18 jetsontk1 arm-tegra_defconfig : warnings 0:51.32 jetsontk1 arm-multi_v7_defconfig : warnings 0:49.20 jetsontk1 arm-multi_lpae_defconfig : warnings 1:02.54 jetsontk1 arm-multi_v7_nosmp_defconfig : warnings 1:34.78 pandaes arm-omap2plus_defconfig : warnings 1:35.55 pandaes arm-multi_v7_defconfig : passed 1:37.19 pandaes arm-multi_v7_nosmp_defconfig : warnings 2:02.87 pi arm-exynos_defconfig : passed 2:08.80 pi arm-multi_v7_defconfig : passed 2:14.26 pi arm-multi_v7_nosmp_defconfig : warnings 2:11.25 pit arm-exynos_defconfig : passed 2:09.92 pit arm-multi_v7_defconfig : passed 2:16.30 pit arm-multi_lpae_defconfig : passed 2:26.97 pit arm-multi_v7_nosmp_defconfig : warnings 2:12.10 seattle arm64-defconfig : passed 2:33.09 snow arm-exynos_defconfig : passed 2:07.27 snow arm-multi_v7_defconfig : passed 2:21.82 snow arm-multi_lpae_defconfig : passed 1:59.41 snow arm-multi_v7_nosmp_defconfig : warnings 1:56.79 trimslice arm-tegra_defconfig : warnings 2:38.30 trimslice arm-multi_v7_defconfig : warnings 1:58.27 trimslice arm-multi_v7_nosmp_defconfig : warnings 1:34.00 wandboard arm-imx_v6_v7_defconfig : passed 1:20.22 wandboard arm-multi_v7_defconfig : passed 1:10.28 wandboard arm-multi_v7_nosmp_defconfig : warnings 1:09.27
Offline boards:
beaver arm-tegra_defconfig : OFFLINE 2:12.09 beaver arm-multi_v7_defconfig : OFFLINE 2:20.87 beaver arm-multi_v7_nosmp_defconfig : OFFLINE 2:13.58 colibri-vf61 arm-imx_v6_v7_defconfig : OFFLINE 1:17.12 colibri-vf61 arm-multi_v7_defconfig : OFFLINE 1:17.84 colibri-vf61 arm-multi_v7_nosmp_defconfig : OFFLINE 1:27.28 omap5uevm arm-multi_v7_nosmp_defconfig : OFFLINE 2:19.49 parallella arm-multi_v7_defconfig : OFFLINE 2:35.65 parallella arm-multi_v7_nosmp_defconfig : OFFLINE 2:12.61 rk3288evb arm-multi_v7_defconfig : OFFLINE 0:48.71 rk3288evb arm-multi_lpae_defconfig : OFFLINE 1:02.53 rk3288evb arm-multi_v7_nosmp_defconfig : OFFLINE 0:42.17 sama5 arm-sama5_defconfig : OFFLINE 2:21.30 sama5d3-xplained arm-sama5_defconfig : OFFLINE 2:24.31 socfpga arm-socfpga_defconfig : OFFLINE 2:16.93 socfpga arm-multi_v7_defconfig : OFFLINE 2:30.85 socfpga arm-multi_v7_nosmp_defconfig : OFFLINE 2:12.14
Board legend is available at http://arm-soc.lixom.net/boards.html
Board arndale-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
hctosys: unable to open rtc device (rtc0) MAIN_DC: disabling hdmi-en: disabling ahci 122f0000.sata: couldn't get PHY in node sata: -517 Booting Linux on physical CPU 0x0 Linux version 4.6.0-rc6-next-20160505 (build@brutus) (gcc version 6.1.0 (GCC) ) #1 Wed May 4 23:13:51 PDT 2016 [c10b3768] *pgd=4100041e(bad) CPU: ARMv7 Processor [410fc0f4] revision 4 (ARMv7), cr=10c53c7d CPU: div instructions available: patching division code Modules linked in: CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache Machine model: Insignal Arndale evaluation board based on EXYNOS5250 cma: Reserved 64 MiB at 0xbc000000 Memory policy: Data cache writeback Samsung CPU ID: 0x43520010 On node 0 totalpages: 520192 free_area_init_node: node 0, pgdat c10fc32c, node_mem_map eeff8000 DMA zone: 1536 pages used for memmap DMA zone: 0 pages reserved DMA zone: 192512 pages, LIFO batch:31 HighMem zone: 327680 pages, LIFO batch:31 ------------[ cut here ]------------ WARNING: CPU: 0 PID: 0 at /home/build/work/batch/arch/arm/kernel/devtree.c:149 arm_dt_init_cpu_maps+0xf8/0x134 DT /cpu 2 nodes greater than max cores 1, capping them Modules linked in: CPU: 0 PID: 0 Comm: swapper Not tainted 4.6.0-rc6-next-20160505 #1 Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) [<c030e73c>] (unwind_backtrace) from [<c030b2e4>] (show_stack+0x10/0x14) [<c030b2e4>] (show_stack) from [<c0336264>] (__warn+0xe4/0xfc) [<c0336264>] (__warn) from [<c03362b4>] (warn_slowpath_fmt+0x38/0x48) [<c03362b4>] (warn_slowpath_fmt) from [<c0f040a8>] (arm_dt_init_cpu_maps+0xf8/0x134) [<c0f040a8>] (arm_dt_init_cpu_maps) from [<c0f03388>] (setup_arch+0x780/0x944) [<c0f03388>] (setup_arch) from [<c0f00940>] (start_kernel+0x68/0x374)
[PYBOOT] [arndale 02:23]: Timed out waiting for "<type 'str'>":
[PYBOOT] [arndale 02:24]: got exception: timeout ~$off
[PYBOOT] [arndale 02:25]: Done. Board bbb-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.565557] omap_hsmmc 48060000.mmc: Got CD GPIO [ 1.631512] Synopsys Designware Multimedia Card Interface Driver [ 1.639298] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.649214] ledtrig-cpu: registered to indicate activity on CPUs [ 1.656452] usbcore: registered new interface driver usbhid [ 1.662378] usbhid: USB HID core driver [ 1.674303] NET: Registered protocol family 10 [ 1.680822] sit: IPv6 over IPv4 tunneling driver [ 1.686963] NET: Registered protocol family 17 [ 1.691721] can: controller area network core (rev 20120528 abi 9) [ 1.698358] NET: Registered protocol family 29 [ 1.703064] can: raw protocol (rev 20120528) [ 1.707575] can: broadcast manager protocol (rev 20120528 t) [ 1.713559] can: netlink gateway (rev 20130117) max_hops=1 [ 1.720313] Key type dns_resolver registered [ 1.725167] omap_voltage_late_init: Voltage driver support not added [ 1.732124] ThumbEE CPU extension supported. [ 1.736673] Registering SWP/SWPB emulation handler [ 1.781580] tps65217 0-0024: TPS65217 ID 0xe version 1.2 [ 1.788020] at24 0-0050: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.795761] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 1.804378] at24 2-0054: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.812218] at24 2-0055: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.819981] at24 2-0056: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.827724] at24 2-0057: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.835071] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz [ 1.842153] hctosys: unable to open rtc device (rtc0) [ 1.855678] Waiting for root device /dev/mmcblk0p2... [ 1.861431] mmc1: new high speed MMC card at address 0001 [ 1.868227] mmcblk1: mmc1:0001 MMC02G 1.79 GiB [ 1.873509] mmcblk1boot0: mmc1:0001 MMC02G partition 1 1.00 MiB [ 1.880195] mmcblk1boot1: mmc1:0001 MMC02G partition 2 1.00 MiB [ 1.888802] mmcblk1: p1 p2
[PYBOOT] [bbb 01:51]: Timed out waiting for "<type 'str'>":
[PYBOOT] [bbb 01:52]: got exception: timeout ~$off
[PYBOOT] [bbb 01:53]: Done. Board bbb-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
sdhci: Secure Digital Host Controller Interface driver sdhci: Copyright(c) Pierre Ossman omap_hsmmc 48060000.mmc: Got CD GPIO Synopsys Designware Multimedia Card Interface Driver sdhci-pltfm: SDHCI platform and OF driver helper ledtrig-cpu: registered to indicate activity on CPUs usbcore: registered new interface driver usbhid usbhid: USB HID core driver NET: Registered protocol family 10 sit: IPv6 over IPv4 tunneling driver NET: Registered protocol family 17 can: controller area network core (rev 20120528 abi 9) NET: Registered protocol family 29 can: raw protocol (rev 20120528) can: broadcast manager protocol (rev 20120528 t) can: netlink gateway (rev 20130117) max_hops=1 Key type dns_resolver registered omap_voltage_late_init: Voltage driver support not added ThumbEE CPU extension supported. at24 0-0050: 32768 byte 24c256 EEPROM, writable, 1 bytes/write omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz at24 2-0054: 32768 byte 24c256 EEPROM, writable, 1 bytes/write at24 2-0055: 32768 byte 24c256 EEPROM, writable, 1 bytes/write at24 2-0056: 32768 byte 24c256 EEPROM, writable, 1 bytes/write at24 2-0057: 32768 byte 24c256 EEPROM, writable, 1 bytes/write omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz hctosys: unable to open rtc device (rtc0) Waiting for root device /dev/mmcblk0p2... mmc1: new high speed MMC card at address 0001 mmcblk1: mmc1:0001 MMC02G 1.79 GiB mmcblk1boot0: mmc1:0001 MMC02G partition 1 1.00 MiB mmcblk1boot1: mmc1:0001 MMC02G partition 2 1.00 MiB mmcblk1: p1 p2
[PYBOOT] [bbb 02:05]: Timed out waiting for "<type 'str'>":
[PYBOOT] [bbb 02:06]: got exception: timeout ~$off
[PYBOOT] [bbb 02:07]: Done. Board bbb-arm-omap2plus_defconfig failure log: -------------------------------------------------
[ 2.039183] omap_hsmmc 481d8000.mmc: lookup for GPIO cd failed [ 2.045302] omap_hsmmc 481d8000.mmc: GPIO lookup for consumer wp [ 2.051651] omap_hsmmc 481d8000.mmc: using device tree for GPIO lookup [ 2.058530] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@481d8000[0]' [ 2.068157] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@481d8000[0]' [ 2.077686] omap_hsmmc 481d8000.mmc: using lookup tables for GPIO lookup [ 2.084702] omap_hsmmc 481d8000.mmc: lookup for GPIO wp failed [ 2.127895] ledtrig-cpu: registered to indicate activity on CPUs [ 2.136525] oprofile: using arm/armv7 [ 2.141493] Initializing XFRM netlink socket [ 2.146590] NET: Registered protocol family 10 [ 2.156946] sit: IPv6 over IPv4 tunneling driver [ 2.165873] NET: Registered protocol family 17 [ 2.170796] NET: Registered protocol family 15 [ 2.176004] Key type dns_resolver registered [ 2.180851] omap_voltage_late_init: Voltage driver support not added [ 2.187589] sr_dev_init: No voltage domain specified for smartreflex0. Cannot initialize [ 2.196055] sr_dev_init: No voltage domain specified for smartreflex1. Cannot initialize [ 2.205630] ThumbEE CPU extension supported. [ 2.210253] Registering SWP/SWPB emulation handler [ 2.215273] SmartReflex Class3 initialized [ 2.287432] tps65217 0-0024: TPS65217 ID 0xe version 1.2 [ 2.294689] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 2.303410] mmc1: new high speed MMC card at address 0001 [ 2.318266] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz [ 2.326490] mmcblk1: mmc1:0001 MMC02G 1.79 GiB [ 2.334285] hctosys: unable to open rtc device (rtc0) [ 2.339736] sr_init: No PMIC hook to init smartreflex [ 2.345430] sr_init: platform driver register failed for SR [ 2.383409] mmcblk1boot0: mmc1:0001 MMC02G partition 1 1.00 MiB [ 2.391414] mmcblk1boot1: mmc1:0001 MMC02G partition 2 1.00 MiB [ 2.405727] mmcblk1: p1 p2 [ 2.424112] Waiting for root device /dev/mmcblk0p2...
[PYBOOT] [bbb 01:50]: Timed out waiting for "<type 'str'>":
[PYBOOT] [bbb 01:51]: got exception: timeout ~$off
[PYBOOT] [bbb 01:53]: Done. Board beagleboard-x15-arm-multi_lpae_defconfig failure log: -------------------------------------------------
[ 2.171794] palmas-rtc 48070000.i2c:tps659038@58:tps659038_rtc: rtc core: registered 48070000.i2c:tps659 as rtc1 [ 2.186582] at24 0-0050: 4096 byte 24c32 EEPROM, writable, 1 bytes/write [ 2.193664] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 2.220421] rtc-ds1307 2-006f: SET TIME! [ 2.226167] rtc-ds1307 2-006f: rtc core: registered mcp7941x as rtc0 [ 2.232918] rtc-ds1307 2-006f: 64 bytes nvram [ 2.237535] omap_i2c 48060000.i2c: bus 2 rev0.12 at 400 kHz [ 2.245796] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 2.251581] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 [ 2.259817] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x00010010 [ 2.268982] xhci-hcd xhci-hcd.0.auto: irq 410, io mem 0x48890000 [ 2.275854] hub 1-0:1.0: USB hub found [ 2.279819] hub 1-0:1.0: 1 port detected [ 2.284226] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 2.290005] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 [ 2.298114] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 2.307127] hub 2-0:1.0: USB hub found [ 2.311097] hub 2-0:1.0: 1 port detected [ 2.317172] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 2.381444] rtc-ds1307 2-006f: setting system clock to 2001-01-01 00:00:00 UTC (978307200) [ 2.399102] aic_dvdd_fixed: disabling [ 2.403831] Waiting for root device /dev/mmcblk0p1... [ 2.427002] mmc1: new high speed MMC card at address 0001 [ 2.433035] mmcblk1: mmc1:0001 S10004 3.56 GiB [ 2.437946] mmcblk1boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 2.444300] mmcblk1boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 2.451218] mmcblk1: p1 [ 2.589925] usb 1-1: new high-speed USB device number 2 using xhci-hcd [ 2.746251] hub 1-1:1.0: USB hub found [ 2.750242] hub 1-1:1.0: 4 ports detected [ 2.829964] usb 2-1: new SuperSpeed USB device number 2 using xhci-hcd [ 2.858244] hub 2-1:1.0: USB hub found [ 2.862233] hub 2-1:1.0: 4 ports detected
[PYBOOT] [beagleboard-x15 01:46]: Timed out waiting for "<type 'str'>":
[PYBOOT] [beagleboard-x15 01:47]: got exception: timeout ~$off
[PYBOOT] [beagleboard-x15 01:48]: Done. Board beagleboard-x15-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 2.171038] palmas-rtc 48070000.i2c:tps659038@58:tps659038_rtc: rtc core: registered 48070000.i2c:tps659 as rtc1 [ 2.185796] at24 0-0050: 4096 byte 24c32 EEPROM, writable, 1 bytes/write [ 2.192870] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 2.215378] rtc-ds1307 2-006f: SET TIME! [ 2.221106] rtc-ds1307 2-006f: rtc core: registered mcp7941x as rtc0 [ 2.227861] rtc-ds1307 2-006f: 64 bytes nvram [ 2.232476] omap_i2c 48060000.i2c: bus 2 rev0.12 at 400 kHz [ 2.240716] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 2.246495] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 [ 2.254733] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x00010010 [ 2.263909] xhci-hcd xhci-hcd.0.auto: irq 410, io mem 0x48890000 [ 2.270785] hub 1-0:1.0: USB hub found [ 2.274739] hub 1-0:1.0: 1 port detected [ 2.279147] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 2.284924] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 [ 2.293035] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 2.302054] hub 2-0:1.0: USB hub found [ 2.306023] hub 2-0:1.0: 1 port detected [ 2.312126] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 2.376390] rtc-ds1307 2-006f: setting system clock to 2001-01-01 00:00:00 UTC (978307200) [ 2.394472] aic_dvdd_fixed: disabling [ 2.399171] Waiting for root device /dev/mmcblk0p1... [ 2.431949] mmc1: new high speed MMC card at address 0001 [ 2.437974] mmcblk1: mmc1:0001 S10004 3.56 GiB [ 2.442894] mmcblk1boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 2.449244] mmcblk1boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 2.456183] mmcblk1: p1 [ 2.584882] usb 1-1: new high-speed USB device number 2 using xhci-hcd [ 2.741182] hub 1-1:1.0: USB hub found [ 2.745175] hub 1-1:1.0: 4 ports detected [ 2.824918] usb 2-1: new SuperSpeed USB device number 2 using xhci-hcd [ 2.853177] hub 2-1:1.0: USB hub found [ 2.857168] hub 2-1:1.0: 4 ports detected
[PYBOOT] [beagleboard-x15 01:40]: Timed out waiting for "<type 'str'>":
[PYBOOT] [beagleboard-x15 01:41]: got exception: timeout ~$off
[PYBOOT] [beagleboard-x15 01:43]: Done. Board beagleboard-x15-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
palmas-rtc 48070000.i2c:tps659038@58:tps659038_rtc: rtc core: registered 48070000.i2c:tps659 as rtc1 at24 0-0050: 4096 byte 24c32 EEPROM, writable, 1 bytes/write omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz rtc-ds1307 2-006f: SET TIME! rtc-ds1307 2-006f: rtc core: registered mcp7941x as rtc0 rtc-ds1307 2-006f: 64 bytes nvram omap_i2c 48060000.i2c: bus 2 rev0.12 at 400 kHz xhci-hcd xhci-hcd.0.auto: xHCI Host Controller xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x00010010 xhci-hcd xhci-hcd.0.auto: irq 410, io mem 0x48890000 hub 1-0:1.0: USB hub found hub 1-0:1.0: 1 port detected xhci-hcd xhci-hcd.0.auto: xHCI Host Controller xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. hub 2-0:1.0: USB hub found hub 2-0:1.0: 1 port detected omap_hsmmc 4809c000.mmc: Got CD GPIO rtc-ds1307 2-006f: setting system clock to 2001-01-01 00:00:00 UTC (978307200) aic_dvdd_fixed: disabling Waiting for root device /dev/mmcblk0p1... mmc1: new high speed MMC card at address 0001 mmcblk1: mmc1:0001 S10004 3.56 GiB mmcblk1boot0: mmc1:0001 S10004 partition 1 4.00 MiB mmcblk1boot1: mmc1:0001 S10004 partition 2 4.00 MiB mmcblk1: p1 usb 1-1: new high-speed USB device number 2 using xhci-hcd hub 1-1:1.0: USB hub found hub 1-1:1.0: 4 ports detected usb 2-1: new SuperSpeed USB device number 2 using xhci-hcd hub 2-1:1.0: USB hub found hub 2-1:1.0: 4 ports detected
[PYBOOT] [beagleboard-x15 02:02]: Timed out waiting for "<type 'str'>":
[PYBOOT] [beagleboard-x15 02:03]: got exception: timeout ~$off
[PYBOOT] [beagleboard-x15 02:04]: Done. Board beagleboard-x15-arm-omap2plus_defconfig failure log: -------------------------------------------------
[ 4.250077] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer cd [ 4.256380] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 4.263281] of_get_named_gpiod_flags: parsed 'cd-gpios' property of node '/ocp/mmc@4809c000[0]' - status (0) [ 4.273688] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 4.278557] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer wp [ 4.284857] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 4.291724] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@4809c000[0]' [ 4.301317] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@4809c000[0]' [ 4.310821] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 4.317883] omap_hsmmc 4809c000.mmc: lookup for GPIO wp failed [ 4.367449] omap_hsmmc 480b4000.mmc: GPIO lookup for consumer cd [ 4.373748] omap_hsmmc 480b4000.mmc: using device tree for GPIO lookup [ 4.380619] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/ocp/mmc@480b4000[0]' [ 4.390213] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/ocp/mmc@480b4000[0]' [ 4.399717] omap_hsmmc 480b4000.mmc: using lookup tables for GPIO lookup [ 4.406761] omap_hsmmc 480b4000.mmc: lookup for GPIO cd failed [ 4.412886] omap_hsmmc 480b4000.mmc: GPIO lookup for consumer wp [ 4.419213] omap_hsmmc 480b4000.mmc: using device tree for GPIO lookup [ 4.426056] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@480b4000[0]' [ 4.435655] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@480b4000[0]' [ 4.445152] omap_hsmmc 480b4000.mmc: using lookup tables for GPIO lookup [ 4.452202] omap_hsmmc 480b4000.mmc: lookup for GPIO wp failed [ 4.497628] hctosys: unable to open rtc device (rtc0) [ 4.502922] sr_init: No PMIC hook to init smartreflex [ 4.508437] sr_init: platform driver register failed for SR [ 4.549146] mmc1: new high speed MMC card at address 0001 [ 4.554486] aic_dvdd_fixed: disabling [ 4.558951] ldousb: disabling [ 4.561155] mmcblk1: mmc1:0001 S10004 3.56 GiB [ 4.561920] mmcblk1boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 4.562561] mmcblk1boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 4.580979] mmcblk1: p1 [ 4.588702] Waiting for root device /dev/mmcblk0p1...
[PYBOOT] [beagleboard-x15 01:43]: Timed out waiting for "<type 'str'>":
[PYBOOT] [beagleboard-x15 01:44]: got exception: timeout ~$off
[PYBOOT] [beagleboard-x15 01:45]: Done. Board colombus-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
[....] Activating swap...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. EXT4-fs (mmcblk0p1): warning: mounting fs with errors, running e2fsck is recommended EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [....] Cleaning up temporary files... /tmp[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] Activating lvm and md swap...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Checking file systems...fsck from util-linux 2.20.1 [?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Mounting local filesystems...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Activating swapfile swap...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Cleaning up temporary files...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] Setting kernel variables ...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. random: dd urandom read with 56 bits of entropy available [....] Configuring network interfaces...Internet Systems Consortium DHCP Client 4.2.2 Copyright 2004-2011 Internet Systems Consortium. All rights reserved. For info, please visit https://www.isc.org/software/dhcp/
eth0: device MAC address 66:63:47:82:9c:8d RX IPC Checksum Offload disabled No MAC Management Counters available IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready Listening on LPF/eth0/66:63:47:82:9c:8d Sending on LPF/eth0/66:63:47:82:9c:8d Sending on Socket/fallback DHCPREQUEST on eth0 to 255.255.255.255 port 67 DHCPREQUEST on eth0 to 255.255.255.255 port 67 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 3 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 7 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 13 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 15 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 8 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 10
[PYBOOT] [colombus 03:17]: Timed out waiting for "<type 'str'>": DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 5
[PYBOOT] [colombus 03:18]: got exception: timeout ~$off
[PYBOOT] [colombus 03:19]: Done. Board cosmic-arm-imx_v6_v7_defconfig failure log: -------------------------------------------------
[ 14.413265] blk_update_request: I/O error, dev mmcblk0, sector 3633185 [ 18.487478] mmcblk0: error -110 transferring data, sector 3633186, nr 230, cmd response 0x900, card status 0x0 [ 18.497801] blk_update_request: I/O error, dev mmcblk0, sector 3633186 [ 22.572022] mmcblk0: error -110 transferring data, sector 3633187, nr 229, cmd response 0x900, card status 0x0 [ 22.582347] blk_update_request: I/O error, dev mmcblk0, sector 3633187 [ 26.656561] mmcblk0: error -110 transferring data, sector 3633188, nr 228, cmd response 0x900, card status 0x0 [ 26.666884] blk_update_request: I/O error, dev mmcblk0, sector 3633188 [ 30.741044] mmcblk0: error -110 transferring data, sector 3633189, nr 227, cmd response 0x900, card status 0x0 [ 30.751366] blk_update_request: I/O error, dev mmcblk0, sector 3633189 [ 34.825586] mmcblk0: error -110 transferring data, sector 3633190, nr 226, cmd response 0x900, card status 0x0 [ 34.835915] blk_update_request: I/O error, dev mmcblk0, sector 3633190 [ 38.910074] mmcblk0: error -110 transferring data, sector 3633191, nr 225, cmd response 0x900, card status 0x0 [ 38.920405] blk_update_request: I/O error, dev mmcblk0, sector 3633191 [ 42.994656] mmcblk0: error -110 transferring data, sector 3633192, nr 224, cmd response 0x900, card status 0x0 [ 43.004991] blk_update_request: I/O error, dev mmcblk0, sector 3633192 [ 47.079155] mmcblk0: error -110 transferring data, sector 3633193, nr 223, cmd response 0x900, card status 0x0 [ 47.089479] blk_update_request: I/O error, dev mmcblk0, sector 3633193 [ 51.163686] mmcblk0: error -110 transferring data, sector 3633194, nr 222, cmd response 0x900, card status 0x0 [ 51.174006] blk_update_request: I/O error, dev mmcblk0, sector 3633194 [ 55.248206] mmcblk0: error -110 transferring data, sector 3633195, nr 221, cmd response 0x900, card status 0x0 [ 55.258524] blk_update_request: I/O error, dev mmcblk0, sector 3633195 [ 59.332731] mmcblk0: error -110 transferring data, sector 3633196, nr 220, cmd response 0x900, card status 0x0 [ 59.343054] blk_update_request: I/O error, dev mmcblk0, sector 3633196 [ 63.417259] mmcblk0: error -110 transferring data, sector 3633197, nr 219, cmd response 0x900, card status 0x0 [ 63.427580] blk_update_request: I/O error, dev mmcblk0, sector 3633197 [ 67.501732] mmcblk0: error -110 transferring data, sector 3633198, nr 218, cmd response 0x900, card status 0x0 [ 67.512056] blk_update_request: I/O error, dev mmcblk0, sector 3633198 [ 71.586262] mmcblk0: error -110 transferring data, sector 3633199, nr 217, cmd response 0x900, card status 0x0 [ 71.596585] blk_update_request: I/O error, dev mmcblk0, sector 3633199 [ 75.670756] mmcblk0: error -110 transferring data, sector 3633200, nr 216, cmd response 0x900, card status 0x0 [ 75.681078] blk_update_request: I/O error, dev mmcblk0, sector 3633200 [ 79.755290] mmcblk0: error -110 transferring data, sector 3633201, nr 215, cmd response 0x900, card status 0x0 [ 79.765613] blk_update_request: I/O error, dev mmcblk0, sector 3633201
[PYBOOT] [cosmic 01:59]: Timed out waiting for "<type 'str'>":
[PYBOOT] [cosmic 02:00]: got exception: timeout ~$off
[PYBOOT] [cosmic 02:01]: Done. Board cosmic-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 14.062302] blk_update_request: I/O error, dev mmcblk0, sector 3633185 [ 18.136285] mmcblk0: error -110 transferring data, sector 3633186, nr 230, cmd response 0x900, card status 0x0 [ 18.146362] blk_update_request: I/O error, dev mmcblk0, sector 3633186 [ 22.220340] mmcblk0: error -110 transferring data, sector 3633187, nr 229, cmd response 0x900, card status 0x0 [ 22.230412] blk_update_request: I/O error, dev mmcblk0, sector 3633187 [ 26.304392] mmcblk0: error -110 transferring data, sector 3633188, nr 228, cmd response 0x900, card status 0x0 [ 26.314473] blk_update_request: I/O error, dev mmcblk0, sector 3633188 [ 30.388458] mmcblk0: error -110 transferring data, sector 3633189, nr 227, cmd response 0x900, card status 0x0 [ 30.398533] blk_update_request: I/O error, dev mmcblk0, sector 3633189 [ 34.472521] mmcblk0: error -110 transferring data, sector 3633190, nr 226, cmd response 0x900, card status 0x0 [ 34.482602] blk_update_request: I/O error, dev mmcblk0, sector 3633190 [ 38.556585] mmcblk0: error -110 transferring data, sector 3633191, nr 225, cmd response 0x900, card status 0x0 [ 38.566658] blk_update_request: I/O error, dev mmcblk0, sector 3633191 [ 42.640643] mmcblk0: error -110 transferring data, sector 3633192, nr 224, cmd response 0x900, card status 0x0 [ 42.650734] blk_update_request: I/O error, dev mmcblk0, sector 3633192 [ 46.724726] mmcblk0: error -110 transferring data, sector 3633193, nr 223, cmd response 0x900, card status 0x0 [ 46.734796] blk_update_request: I/O error, dev mmcblk0, sector 3633193 [ 50.808779] mmcblk0: error -110 transferring data, sector 3633194, nr 222, cmd response 0x900, card status 0x0 [ 50.818854] blk_update_request: I/O error, dev mmcblk0, sector 3633194 [ 54.892834] mmcblk0: error -110 transferring data, sector 3633195, nr 221, cmd response 0x900, card status 0x0 [ 54.902906] blk_update_request: I/O error, dev mmcblk0, sector 3633195 [ 58.976887] mmcblk0: error -110 transferring data, sector 3633196, nr 220, cmd response 0x900, card status 0x0 [ 58.986966] blk_update_request: I/O error, dev mmcblk0, sector 3633196 [ 63.060948] mmcblk0: error -110 transferring data, sector 3633197, nr 219, cmd response 0x900, card status 0x0 [ 63.071025] blk_update_request: I/O error, dev mmcblk0, sector 3633197 [ 67.145004] mmcblk0: error -110 transferring data, sector 3633198, nr 218, cmd response 0x900, card status 0x0 [ 67.155078] blk_update_request: I/O error, dev mmcblk0, sector 3633198 [ 71.229057] mmcblk0: error -110 transferring data, sector 3633199, nr 217, cmd response 0x900, card status 0x0 [ 71.239136] blk_update_request: I/O error, dev mmcblk0, sector 3633199 [ 75.313173] mmcblk0: error -110 transferring data, sector 3633200, nr 216, cmd response 0x900, card status 0x0 [ 75.323237] blk_update_request: I/O error, dev mmcblk0, sector 3633200 [ 79.397214] mmcblk0: error -110 transferring data, sector 3633201, nr 215, cmd response 0x900, card status 0x0 [ 79.407291] blk_update_request: I/O error, dev mmcblk0, sector 3633201
[PYBOOT] [cosmic 02:06]: Timed out waiting for "<type 'str'>":
[PYBOOT] [cosmic 02:07]: got exception: timeout ~$off
[PYBOOT] [cosmic 02:08]: Done. Board cosmic-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
blk_update_request: I/O error, dev mmcblk0, sector 3633185 mmcblk0: error -110 transferring data, sector 3633186, nr 230, cmd response 0x900, card status 0x0 blk_update_request: I/O error, dev mmcblk0, sector 3633186 mmcblk0: error -110 transferring data, sector 3633187, nr 229, cmd response 0x900, card status 0x0 blk_update_request: I/O error, dev mmcblk0, sector 3633187 mmcblk0: error -110 transferring data, sector 3633188, nr 228, cmd response 0x900, card status 0x0 blk_update_request: I/O error, dev mmcblk0, sector 3633188 mmcblk0: error -110 transferring data, sector 3633189, nr 227, cmd response 0x900, card status 0x0 blk_update_request: I/O error, dev mmcblk0, sector 3633189 mmcblk0: error -110 transferring data, sector 3633190, nr 226, cmd response 0x900, card status 0x0 blk_update_request: I/O error, dev mmcblk0, sector 3633190 mmcblk0: error -110 transferring data, sector 3633191, nr 225, cmd response 0x900, card status 0x0 blk_update_request: I/O error, dev mmcblk0, sector 3633191 mmcblk0: error -110 transferring data, sector 3633192, nr 224, cmd response 0x900, card status 0x0 blk_update_request: I/O error, dev mmcblk0, sector 3633192 mmcblk0: error -110 transferring data, sector 3633193, nr 223, cmd response 0x900, card status 0x0 blk_update_request: I/O error, dev mmcblk0, sector 3633193 mmcblk0: error -110 transferring data, sector 3633194, nr 222, cmd response 0x900, card status 0x0 blk_update_request: I/O error, dev mmcblk0, sector 3633194 mmcblk0: error -110 transferring data, sector 3633195, nr 221, cmd response 0x900, card status 0x0 blk_update_request: I/O error, dev mmcblk0, sector 3633195 mmcblk0: error -110 transferring data, sector 3633196, nr 220, cmd response 0x900, card status 0x0 blk_update_request: I/O error, dev mmcblk0, sector 3633196 mmcblk0: error -110 transferring data, sector 3633197, nr 219, cmd response 0x900, card status 0x0 blk_update_request: I/O error, dev mmcblk0, sector 3633197 mmcblk0: error -110 transferring data, sector 3633198, nr 218, cmd response 0x900, card status 0x0 blk_update_request: I/O error, dev mmcblk0, sector 3633198 mmcblk0: error -110 transferring data, sector 3633199, nr 217, cmd response 0x900, card status 0x0 blk_update_request: I/O error, dev mmcblk0, sector 3633199 mmcblk0: error -110 transferring data, sector 3633200, nr 216, cmd response 0x900, card status 0x0 blk_update_request: I/O error, dev mmcblk0, sector 3633200 mmcblk0: error -110 transferring data, sector 3633201, nr 215, cmd response 0x900, card status 0x0 blk_update_request: I/O error, dev mmcblk0, sector 3633201
[PYBOOT] [cosmic 02:10]: Timed out waiting for "<type 'str'>":
[PYBOOT] [cosmic 02:11]: got exception: timeout ~$off
[PYBOOT] [cosmic 02:12]: Done. Board dalmore-arm-multi_lpae_defconfig failure log: -------------------------------------------------
[ 2.795136] can: netlink gateway (rev 20130117) max_hops=1 [ 2.802100] Key type dns_resolver registered [ 2.808441] ThumbEE CPU extension supported. [ 2.812837] Registering SWP/SWPB emulation handler [ 2.826248] usb1_vbus: supplied by vdd-sys-5v0 [ 2.833925] usb2_vbus: supplied by vdd-sys-5v0 [ 2.850875] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 2.874015] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.880772] [drm] No driver support for vblank timestamp query. [ 2.904633] mmc1: new high speed MMC card at address 0001 [ 2.913780] mmcblk1: mmc1:0001 SEM32G 29.1 GiB [ 2.921967] mmcblk1boot0: mmc1:0001 SEM32G partition 1 4.00 MiB [ 2.930540] mmcblk1boot1: mmc1:0001 SEM32G partition 2 4.00 MiB [ 2.939811] mmcblk1rpmb: mmc1:0001 SEM32G partition 3 4.00 MiB [ 2.949533] mmcblk1: p1 [ 3.058610] Console: switching to colour frame buffer device 240x75 [ 3.146047] drm drm: fb0: frame buffer device [ 3.165836] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.180497] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.186064] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 3.196170] tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 [ 3.210787] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 3.221009] hub 1-0:1.0: USB hub found [ 3.225038] hub 1-0:1.0: 1 port detected [ 3.235600] input: gpio-keys as /devices/soc0/gpio-keys/input/input0 [ 3.249320] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 3.309942] dvdd_ts: disabling [ 3.313157] usb1_vbus: disabling [ 3.316474] vdd_cam_1v8_reg: disabling [ 3.323731] Waiting for root device /dev/mmcblk0p1... [ 3.535804] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 4.514649] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f [ 64.856593] random: nonblocking pool is initialized
[PYBOOT] [dalmore 02:11]: Timed out waiting for "<type 'str'>":
[PYBOOT] [dalmore 02:12]: got exception: timeout ~$off
[PYBOOT] [dalmore 02:13]: Done. Board dalmore-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 2.795029] can: netlink gateway (rev 20130117) max_hops=1 [ 2.801989] Key type dns_resolver registered [ 2.808351] ThumbEE CPU extension supported. [ 2.812745] Registering SWP/SWPB emulation handler [ 2.836401] usb1_vbus: supplied by vdd-sys-5v0 [ 2.847076] usb2_vbus: supplied by vdd-sys-5v0 [ 2.864828] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 2.888398] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.895153] [drm] No driver support for vblank timestamp query. [ 2.898442] mmc1: new high speed MMC card at address 0001 [ 2.901890] mmcblk1: mmc1:0001 SEM32G 29.1 GiB [ 2.904638] mmcblk1boot0: mmc1:0001 SEM32G partition 1 4.00 MiB [ 2.905996] mmcblk1boot1: mmc1:0001 SEM32G partition 2 4.00 MiB [ 2.908405] mmcblk1rpmb: mmc1:0001 SEM32G partition 3 4.00 MiB [ 2.912456] mmcblk1: p1 [ 3.096508] Console: switching to colour frame buffer device 240x75 [ 3.183926] drm drm: fb0: frame buffer device [ 3.205682] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.220814] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.226397] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 3.235216] tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 [ 3.250715] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 3.260970] hub 1-0:1.0: USB hub found [ 3.264960] hub 1-0:1.0: 1 port detected [ 3.275796] input: gpio-keys as /devices/soc0/gpio-keys/input/input0 [ 3.289801] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 3.352222] dvdd_ts: disabling [ 3.355445] usb1_vbus: disabling [ 3.358705] vdd_cam_1v8_reg: disabling [ 3.366142] Waiting for root device /dev/mmcblk0p1... [ 3.575721] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 4.553615] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f [ 49.270493] random: nonblocking pool is initialized
[PYBOOT] [dalmore 01:53]: Timed out waiting for "<type 'str'>":
[PYBOOT] [dalmore 01:54]: got exception: timeout ~$off
[PYBOOT] [dalmore 01:55]: Done. Board dalmore-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
can: raw protocol (rev 20120528) can: broadcast manager protocol (rev 20120528 t) can: netlink gateway (rev 20130117) max_hops=1 Key type dns_resolver registered ThumbEE CPU extension supported. usb1_vbus: supplied by vdd-sys-5v0 usb2_vbus: supplied by vdd-sys-5v0 VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [drm] No driver support for vblank timestamp query. Console: switching to colour frame buffer device 240x75 drm drm: fb0: frame buffer device [drm] Initialized tegra 0.0.0 20120330 on minor 0 tegra-ehci 7d008000.usb: EHCI Host Controller tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 mmc1: new high speed MMC card at address 0001 tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 mmcblk1: mmc1:0001 SEM32G 29.1 GiB mmcblk1boot0: mmc1:0001 SEM32G partition 1 4.00 MiB tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 hub 1-0:1.0: USB hub found mmcblk1boot1: mmc1:0001 SEM32G partition 2 4.00 MiB hub 1-0:1.0: 1 port detected mmcblk1rpmb: mmc1:0001 SEM32G partition 3 4.00 MiB input: gpio-keys as /devices/soc0/gpio-keys/input/input0 mmcblk1: p1 palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) dvdd_ts: disabling usb1_vbus: disabling vdd_cam_1v8_reg: disabling Waiting for root device /dev/mmcblk0p1... usb 1-1: new high-speed USB device number 2 using tegra-ehci asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f
[PYBOOT] [dalmore 01:49]: Timed out waiting for "<type 'str'>":
[PYBOOT] [dalmore 01:50]: got exception: timeout ~$off
[PYBOOT] [dalmore 01:52]: Done. Board dalmore-arm-tegra_defconfig failure log: -------------------------------------------------
[ 5.411479] Bluetooth: RFCOMM socket layer initialized [ 5.416704] Bluetooth: RFCOMM ver 1.11 [ 5.420519] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 5.426001] Bluetooth: BNEP socket layer initialized [ 5.431061] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 5.437070] Bluetooth: HIDP socket layer initialized [ 5.443344] Key type dns_resolver registered [ 5.452751] Registering SWP/SWPB emulation handler [ 5.469424] usb1_vbus: supplied by vdd-sys-5v0 [ 5.479363] usb2_vbus: supplied by vdd-sys-5v0 [ 5.497130] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 5.528313] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 5.535121] [drm] No driver support for vblank timestamp query. [ 5.713528] Console: switching to colour frame buffer device 240x75 [ 5.801072] drm drm: fb0: frame buffer device [ 5.831162] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 5.840270] tegra-ehci 7d008000.usb: EHCI Host Controller [ 5.846128] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 5.855252] tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 [ 5.881193] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 5.895146] hub 1-0:1.0: USB hub found [ 5.899209] hub 1-0:1.0: 1 port detected [ 5.912874] input: gpio-keys as /devices/soc0/gpio-keys/input/input1 [ 5.926992] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:01 UTC (946684801) [ 6.005509] dvdd_ts: disabling [ 6.008615] usb1_vbus: disabling [ 6.012036] vdd_cam_1v8_reg: disabling [ 6.016671] ALSA device list: [ 6.019664] #0: NVIDIA Tegra Dalmore [ 6.025522] Waiting for root device /dev/mmcblk0p1... [ 6.221160] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 7.255708] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f [ 64.729701] random: nonblocking pool is initialized
[PYBOOT] [dalmore 01:50]: Timed out waiting for "<type 'str'>":
[PYBOOT] [dalmore 01:51]: got exception: timeout ~$off
[PYBOOT] [dalmore 01:53]: Done. Board odroidu3-arm-exynos_defconfig failure log: -------------------------------------------------
[ 1.701526] sit: IPv6 over IPv4 tunneling driver [ 1.706617] NET: Registered protocol family 17 [ 1.709870] NET: Registered protocol family 15 [ 1.714353] Key type dns_resolver registered [ 1.718670] Registering SWP/SWPB emulation handler [ 1.731660] [drm] Exynos DRM: using 12c10000.mixer device for DMA mapping operations [ 1.733961] exynos-drm exynos-drm: bound 12c10000.mixer (ops mixer_component_ops) [ 1.741407] exynos-drm exynos-drm: bound 12d00000.hdmi (ops hdmi_component_ops) [ 1.748541] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.755119] [drm] No driver support for vblank timestamp query. [ 1.761022] [drm] Initialized exynos 1.0.0 20110530 on minor 0 [ 1.766848] mmc_host mmc1: Bus speed (slot 0) = 44000000Hz (slot req 52000000Hz, actual 44000000HZ div = 0) [ 1.767376] s3c-rtc 10070000.rtc: rtc disabled, re-enabling [ 1.767427] s3c-rtc 10070000.rtc: warning: invalid RTC value so initializing it [ 1.767607] s3c-rtc 10070000.rtc: rtc core: registered s3c as rtc1 [ 1.792028] max98090 1-0010: MAX98090 REVID=0x43 [ 1.794248] max98090 1-0010: use default 2.8v micbias [ 1.805781] mmc_host mmc1: Bus speed (slot 0) = 73333333Hz (slot req 52000000Hz, actual 36666666HZ div = 1) [ 1.815379] mmc1: new DDR MMC card at address 0001 [ 1.817014] asoc-simple-card sound: HiFi <-> 3830000.i2s mapping ok [ 1.820300] input: gpio_keys as /devices/platform/gpio_keys/input/input0 [ 1.833118] mmcblk1: mmc1:0001 008G92 7.28 GiB [ 1.837322] mmcblk1boot0: mmc1:0001 008G92 partition 1 4.00 MiB [ 1.843200] mmcblk1boot1: mmc1:0001 008G92 partition 2 4.00 MiB [ 1.849099] mmcblk1rpmb: mmc1:0001 008G92 partition 3 512 KiB [ 1.855712] mmcblk1: p1 p2 [ 1.858873] max77686-rtc max77686-rtc: setting system clock to 2000-01-01 01:00:20 UTC (946688420) [ 1.882631] VDD10_HDMI_1.0V: disabling [ 1.883336] vdd_g3d: disabling [ 1.884403] BUCK8_2.8V: disabling [ 1.888416] ALSA device list: [ 1.890018] #0: Odroid-U3 [ 1.893809] Waiting for root device /dev/mmcblk0p2...
[PYBOOT] [odroidu3 01:51]: Timed out waiting for "<type 'str'>":
[PYBOOT] [odroidu3 01:52]: got exception: timeout ~$off
[PYBOOT] [odroidu3 01:53]: Done. Board omap5uevm-arm-multi_lpae_defconfig failure log: -------------------------------------------------
[ 1.972768] ldo1: Bringing 0uV into 1800000-1800000uV [ 1.979311] ldo2: Bringing 0uV into 2800000-2800000uV [ 1.987385] ldo4: Bringing 0uV into 1800000-1800000uV [ 1.998540] ldo7: Bringing 0uV into 2000000-2000000uV [ 2.006607] smsc95xx v1.0.4 [ 2.010064] ldo9: bypassed regulator has no supply! [ 2.015201] ldo9: failed to get the current voltage(-517) [ 2.020877] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 2.036472] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 2.061818] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 2.068298] omap-dwc3 4a020000.omap_dwc3: vbus init failed [ 2.095387] smsc95xx 1-3:1.0 eth0: register 'smsc95xx' at usb-4a064c00.ehci-3, smsc95xx USB 2.0 Ethernet, 76:43:48:a1:28:98 [ 2.112382] smps9: Bringing 0uV into 2100000-2100000uV [ 2.131326] ldo9: bypassed regulator has no supply! [ 2.136441] ldo9: failed to get the current voltage(-517) [ 2.142102] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 2.156188] omap-dwc3 4a020000.omap_dwc3: vbus init failed [ 2.189797] smps9: Bringing 0uV into 2100000-2100000uV [ 2.208767] ldo9: bypassed regulator has no supply! [ 2.213890] ldo9: failed to get the current voltage(-517) [ 2.219553] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 2.233992] palmas-rtc 48070000.i2c:palmas@48:rtc: setting system clock to 2000-01-01 00:02:27 UTC (946684947) [ 2.249656] pbias_mmc_omap5: disabling [ 2.253601] vmmcsdio_fixed: disabling [ 2.258150] Waiting for root device /dev/mmcblk1p2... [ 2.336036] usb 1-2: new high-speed USB device number 3 using ehci-omap [ 2.471928] hub 1-2:1.0: USB hub found [ 2.475941] hub 1-2:1.0: 3 ports detected [ 2.481794] omap-dwc3 4a020000.omap_dwc3: vbus init failed [ 2.509898] smps9: Bringing 0uV into 2100000-2100000uV [ 2.528859] ldo9: bypassed regulator has no supply! [ 2.533978] ldo9: failed to get the current voltage(-517) [ 2.539642] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator
[PYBOOT] [omap5uevm 02:08]: Timed out waiting for "<type 'str'>":
[PYBOOT] [omap5uevm 02:09]: got exception: timeout ~$off
[PYBOOT] [omap5uevm 02:10]: Done. Board omap5uevm-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.980236] ldo1: Bringing 0uV into 1800000-1800000uV [ 1.986780] ldo2: Bringing 0uV into 2800000-2800000uV [ 1.994857] ldo4: Bringing 0uV into 1800000-1800000uV [ 2.006011] ldo7: Bringing 0uV into 2000000-2000000uV [ 2.014049] smsc95xx v1.0.4 [ 2.017516] ldo9: bypassed regulator has no supply! [ 2.022662] ldo9: failed to get the current voltage(-517) [ 2.028344] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 2.043894] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 2.069301] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 2.075697] omap-dwc3 4a020000.omap_dwc3: vbus init failed [ 2.102707] smps9: Bringing 0uV into 2100000-2100000uV [ 2.108287] smsc95xx 1-3:1.0 eth0: register 'smsc95xx' at usb-4a064c00.ehci-3, smsc95xx USB 2.0 Ethernet, 2a:bf:b9:87:b2:af [ 2.133419] ldo9: bypassed regulator has no supply! [ 2.138546] ldo9: failed to get the current voltage(-517) [ 2.144212] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 2.158314] omap-dwc3 4a020000.omap_dwc3: vbus init failed [ 2.187199] smps9: Bringing 0uV into 2100000-2100000uV [ 2.205925] ldo9: bypassed regulator has no supply! [ 2.211049] ldo9: failed to get the current voltage(-517) [ 2.216715] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 2.231215] palmas-rtc 48070000.i2c:palmas@48:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 2.246893] pbias_mmc_omap5: disabling [ 2.250842] vmmcsdio_fixed: disabling [ 2.255379] Waiting for root device /dev/mmcblk1p2... [ 2.368489] usb 1-2: new high-speed USB device number 3 using ehci-omap [ 2.504365] hub 1-2:1.0: USB hub found [ 2.508382] hub 1-2:1.0: 3 ports detected [ 2.514306] omap-dwc3 4a020000.omap_dwc3: vbus init failed [ 2.542230] smps9: Bringing 0uV into 2100000-2100000uV [ 2.561064] ldo9: bypassed regulator has no supply! [ 2.566189] ldo9: failed to get the current voltage(-517) [ 2.571845] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator
[PYBOOT] [omap5uevm 02:03]: Timed out waiting for "<type 'str'>":
[PYBOOT] [omap5uevm 02:04]: got exception: timeout ~$off
[PYBOOT] [omap5uevm 02:06]: Done. Board omap5uevm-arm-omap2plus_defconfig failure log: -------------------------------------------------
[ 4.027627] ldo9: bypassed regulator has no supply! [ 4.032758] ldo9: failed to get the current voltage(-517) [ 4.038420] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 4.061352] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 4.068857] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 4.075447] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer cd [ 4.081753] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 4.088596] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/ocp/mmc@4809c000[0]' [ 4.098179] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/ocp/mmc@4809c000[0]' [ 4.107667] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 4.114721] omap_hsmmc 4809c000.mmc: lookup for GPIO cd failed [ 4.120848] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer wp [ 4.127144] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 4.134003] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@4809c000[0]' [ 4.143584] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@4809c000[0]' [ 4.153081] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 4.160114] omap_hsmmc 4809c000.mmc: lookup for GPIO wp failed [ 4.200009] omap_hsmmc 480ad000.mmc: GPIO lookup for consumer wp [ 4.206301] omap_hsmmc 480ad000.mmc: using device tree for GPIO lookup [ 4.213180] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@480ad000[0]' [ 4.222772] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@480ad000[0]' [ 4.232261] omap_hsmmc 480ad000.mmc: using lookup tables for GPIO lookup [ 4.239294] omap_hsmmc 480ad000.mmc: lookup for GPIO wp failed [ 4.260092] smps9: Bringing 0uV into 2100000-2100000uV [ 4.288844] ldo9: bypassed regulator has no supply! [ 4.293977] ldo9: failed to get the current voltage(-517) [ 4.299652] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 4.319836] hctosys: unable to open rtc device (rtc0) [ 4.325124] sr_init: No PMIC hook to init smartreflex [ 4.330631] sr_init: platform driver register failed for SR [ 4.358657] pbias_mmc_omap5: disabling [ 4.362617] vmmcsdio_fixed: disabling [ 4.368725] Waiting for root device /dev/mmcblk1p2...
[PYBOOT] [omap5uevm 02:02]: Timed out waiting for "<type 'str'>":
[PYBOOT] [omap5uevm 02:03]: got exception: timeout ~$off
[PYBOOT] [omap5uevm 02:05]: Done. Board pi-arm-multi_lpae_defconfig failure log: -------------------------------------------------
[ 1.533028] isl29018 7-0044: No cache defaults, reading back from HW [ 1.539382] isl29018 7-0044: Failed to read 1: -6 [ 1.543966] isl29018 7-0044: regmap initialization fails: -6 [ 1.554849] NET: Registered protocol family 10 [ 1.559280] sit: IPv6 over IPv4 tunneling driver [ 1.562856] NET: Registered protocol family 17 [ 1.566865] can: controller area network core (rev 20120528 abi 9) [ 1.573053] NET: Registered protocol family 29 [ 1.577442] can: raw protocol (rev 20120528) [ 1.581692] can: broadcast manager protocol (rev 20120528 t) [ 1.587334] can: netlink gateway (rev 20130117) max_hops=1 [ 1.593059] Key type dns_resolver registered [ 1.597380] ThumbEE CPU extension supported. [ 1.601302] Registering SWP/SWPB emulation handler [ 1.611200] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.616683] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.623048] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.628422] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 1.638519] input: gpio-keys as /devices/platform/gpio-keys/input/input1 [ 1.644756] mmc_host mmc0: Bus speed (slot 0) = 200000000Hz (slot req 200000000Hz, actual 200000000HZ div = 0) [ 1.658516] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.664187] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.670368] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.675729] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 1.685449] max77686-rtc max77802-rtc: hctosys: unable to read the hardware clock [ 1.707630] Waiting for root device /dev/mmcblk0p1... [ 1.711480] mmc0: tuning execution failed: -5 [ 1.715541] mmc0: error -5 whilst initialising MMC card [ 2.582835] asix 1-1:1.0 eth0: register 'asix' at usb-xhci-hcd.2.auto-1, ASIX AX88772 USB 2.0 Ethernet, c8:b3:73:46:fb:95 [ 2.596957] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 2.602420] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 2.608792] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 2.614176] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo
[PYBOOT] [pi 02:06]: Timed out waiting for "<type 'str'>":
[PYBOOT] [pi 02:07]: got exception: timeout ~$off
[PYBOOT] [pi 02:08]: Done. Board seaboard-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.906291] tegra-dc 54200000.dc: failed to probe RGB output: -517 [ 1.917515] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 1.923998] tegra-ehci c5000000.usb: EHCI Host Controller [ 1.929439] tegra-ehci c5000000.usb: new USB bus registered, assigned bus number 3 [ 1.937889] tegra-ehci c5000000.usb: irq 287, io mem 0xc5000000 [ 1.951543] tegra-ehci c5000000.usb: USB 2.0 started, EHCI 1.00 [ 1.958282] hub 3-0:1.0: USB hub found [ 1.962087] hub 3-0:1.0: 1 port detected [ 1.970136] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.976807] [drm] No driver support for vblank timestamp query. [ 2.001878] mmc0: queuing unknown CIS tuple 0x80 (50 bytes) [ 2.015402] mmc0: queuing unknown CIS tuple 0x80 (7 bytes) [ 2.018221] mmc0: queuing unknown CIS tuple 0x80 (7 bytes) [ 2.025368] mmc0: queuing unknown CIS tuple 0x80 (19 bytes) [ 2.061050] mmc2: switch to bus width 8 failed [ 2.061319] mmc2: switch to bus width 4 failed [ 2.061332] mmc2: new high speed MMC card at address 0001 [ 2.061826] mmcblk2: mmc2:0001 MMC08G 7.46 GiB [ 2.062025] mmcblk2boot0: mmc2:0001 MMC08G partition 1 512 KiB [ 2.062205] mmcblk2boot1: mmc2:0001 MMC08G partition 2 512 KiB [ 2.063421] mmcblk2: p3 [ 2.066711] mmc0: queuing unknown CIS tuple 0x02 (1 bytes) [ 2.070653] mmc0: new SDIO card at address 0001 [ 2.082968] Console: switching to colour frame buffer device 170x48 [ 2.162333] drm drm: fb0: frame buffer device [ 2.181537] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 2.188148] input: gpio-keys as /devices/soc0/gpio-keys/input/input2 [ 2.195122] tps6586x-rtc tps6586x-rtc: setting system clock to 2009-01-01 00:00:00 UTC (1230768000) [ 2.208440] vdd_1v5: disabling [ 2.211492] vdd_1v2: disabling [ 2.770893] asix 2-1:1.0 eth0: register 'asix' at usb-c5008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, c0:c1:c0:13:08:60 [ 2.782282] Waiting for root device /dev/mmcblk0p3... [ 58.220320] random: nonblocking pool is initialized
[PYBOOT] [seaboard 01:54]: Timed out waiting for "<type 'str'>":
[PYBOOT] [seaboard 01:55]: got exception: timeout ~$off
[PYBOOT] [seaboard 01:56]: Done. Board seaboard-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
VDDIO_HDMI: supplied by vdd_5v0 tegra-dc 54200000.dc: failed to probe RGB output: -517 utmi_phy_clk_enable: timeout waiting for phy to stabilize tegra-ehci c5000000.usb: EHCI Host Controller tegra-ehci c5000000.usb: new USB bus registered, assigned bus number 3 tegra-ehci c5000000.usb: irq 287, io mem 0xc5000000 tegra-ehci c5000000.usb: USB 2.0 started, EHCI 1.00 hub 3-0:1.0: USB hub found hub 3-0:1.0: 1 port detected [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [drm] No driver support for vblank timestamp query. mmc2: switch to bus width 8 failed mmc2: switch to bus width 4 failed mmc2: new high speed MMC card at address 0001 mmcblk2: mmc2:0001 MMC08G 7.46 GiB mmcblk2boot0: mmc2:0001 MMC08G partition 1 512 KiB mmcblk2boot1: mmc2:0001 MMC08G partition 2 512 KiB mmcblk2: p3 mmc0: queuing unknown CIS tuple 0x80 (50 bytes) mmc0: queuing unknown CIS tuple 0x80 (7 bytes) mmc0: queuing unknown CIS tuple 0x80 (7 bytes) mmc0: queuing unknown CIS tuple 0x80 (19 bytes) Console: switching to colour frame buffer device 170x48 drm drm: fb0: frame buffer device [drm] Initialized tegra 0.0.0 20120330 on minor 0 input: gpio-keys as /devices/soc0/gpio-keys/input/input2 tps6586x-rtc tps6586x-rtc: setting system clock to 2009-01-01 00:00:00 UTC (1230768000) vdd_1v5: disabling vdd_1v2: disabling mmc0: queuing unknown CIS tuple 0x02 (1 bytes) mmc0: new SDIO card at address 0001 asix 2-1:1.0 eth0: register 'asix' at usb-c5008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, c0:c1:c0:13:08:60 Waiting for root device /dev/mmcblk0p3...
[PYBOOT] [seaboard 01:48]: Timed out waiting for "<type 'str'>":
[PYBOOT] [seaboard 01:49]: got exception: timeout ~$off
[PYBOOT] [seaboard 01:51]: Done. Board seaboard-arm-tegra_defconfig failure log: -------------------------------------------------
[ 4.705734] [<c0439470>] (tegra_drm_fb_init) from [<c043788c>] (tegra_drm_load+0x194/0x22c) [ 4.705749] [<c043788c>] (tegra_drm_load) from [<c041df14>] (drm_dev_register+0xa8/0xb8) [ 4.705763] [<c041df14>] (drm_dev_register) from [<c043739c>] (host1x_drm_probe+0x34/0x94) [ 4.705780] [<c043739c>] (host1x_drm_probe) from [<c04509ec>] (driver_probe_device+0x208/0x2b4) [ 4.705797] [<c04509ec>] (driver_probe_device) from [<c044ee0c>] (bus_for_each_drv+0x60/0x94) [ 4.705814] [<c044ee0c>] (bus_for_each_drv) from [<c0450704>] (__device_attach+0xb0/0x114) [ 4.705829] [<c0450704>] (__device_attach) from [<c044fbe8>] (bus_probe_device+0x84/0x8c) [ 4.705844] [<c044fbe8>] (bus_probe_device) from [<c044df90>] (device_add+0x36c/0x568) [ 4.705869] [<c044df90>] (device_add) from [<c03fcec4>] (host1x_subdev_register+0xac/0xd4) [ 4.705889] [<c03fcec4>] (host1x_subdev_register) from [<c03fd190>] (host1x_client_register+0xfc/0x11c) [ 4.705908] [<c03fd190>] (host1x_client_register) from [<c043cf64>] (tegra_dc_probe+0x180/0x33c) [ 4.705927] [<c043cf64>] (tegra_dc_probe) from [<c04521b0>] (platform_drv_probe+0x50/0xb0) [ 4.705945] [<c04521b0>] (platform_drv_probe) from [<c04509ec>] (driver_probe_device+0x208/0x2b4) [ 4.705960] [<c04509ec>] (driver_probe_device) from [<c044ee0c>] (bus_for_each_drv+0x60/0x94) [ 4.705976] [<c044ee0c>] (bus_for_each_drv) from [<c0450704>] (__device_attach+0xb0/0x114) [ 4.705991] [<c0450704>] (__device_attach) from [<c044fbe8>] (bus_probe_device+0x84/0x8c) [ 4.706007] [<c044fbe8>] (bus_probe_device) from [<c0450074>] (deferred_probe_work_func+0x68/0x94) [ 4.706028] [<c0450074>] (deferred_probe_work_func) from [<c0134af4>] (process_one_work+0x1d8/0x400) [ 4.706044] [<c0134af4>] (process_one_work) from [<c01356d8>] (worker_thread+0x38/0x558) [ 4.706059] [<c01356d8>] (worker_thread) from [<c013a4c0>] (kthread+0xdc/0xf4) [ 4.706077] [<c013a4c0>] (kthread) from [<c0107678>] (ret_from_fork+0x14/0x3c) [ 4.706102] ---[ end trace 485784706e31075e ]--- [ 4.724660] asix 2-1:1.0 eth0: register 'asix' at usb-c5008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, c0:c1:c0:13:08:60 [ 4.747444] Console: switching to colour frame buffer device 170x48 [ 5.201831] drm drm: fb0: frame buffer device [ 5.235178] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 5.242014] input: gpio-keys as /devices/soc0/gpio-keys/input/input4 [ 5.249364] tps6586x-rtc tps6586x-rtc: setting system clock to 2009-01-01 00:00:01 UTC (1230768001) [ 5.309582] vdd_1v5: disabling [ 5.312632] vdd_1v2: disabling [ 5.315774] ALSA device list: [ 5.318739] #0: NVIDIA Tegra Seaboard [ 5.323110] Waiting for root device /dev/mmcblk0p3...
[PYBOOT] [seaboard 01:50]: Timed out waiting for "<type 'str'>":
[PYBOOT] [seaboard 01:51]: got exception: timeout ~$off
[PYBOOT] [seaboard 01:53]: Done. Board snowball-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 2.000762] NET: Registered protocol family 29 [ 2.005218] can: raw protocol (rev 20120528) [ 2.009521] can: broadcast manager protocol (rev 20120528 t) [ 2.015228] can: netlink gateway (rev 20130117) max_hops=1 [ 2.021545] Key type dns_resolver registered [ 2.026245] ThumbEE CPU extension supported. [ 2.030578] Registering SWP/SWPB emulation handler [ 2.042907] input: gpio_keys as /devices/soc0/gpio_keys/input/input0 [ 2.050079] rtc-pl031 80154000.rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 2.059631] thermal cooling_device0: thermal-cpufreq-0 bind to 0: 0-succeed [ 2.066680] thermal cooling_device0: thermal-cpufreq-0 bind to 1: 0-succeed [ 2.073699] thermal cooling_device0: thermal-cpufreq-0 bind to 2: 0-succeed [ 2.080718] db8500-cpufreq-cooling soc:cpufreq-cooling: Cooling device registered: thermal-cpufreq-0 [ 2.097869] db8500-esram12: disabling [ 2.101684] db8500-esram34: disabling [ 2.105499] en-3v3-fixed-supply: disabling [ 2.110107] V-CSI/DSI: disabling [ 2.114471] mmci-reg: disabling [ 2.120452] uart-pl011 80007000.uart: DMA channel TX dma0chan20 [ 2.126464] uart-pl011 80007000.uart: DMA channel RX dma0chan21 [ 2.133056] Waiting for root device /dev/mmcblk0p4... [ 2.161407] mmc3: new high speed MMC card at address 0001 [ 2.167785] mmcblk3: mmc3:0001 3.53 GiB [ 2.172210] mmcblk3boot0: mmc3:0001 partition 1 2.00 MiB [ 2.178039] mmcblk3boot1: mmc3:0001 partition 2 2.00 MiB [ 2.183807] mmcblk3rpmb: mmc3:0001 partition 3 128 KiB [ 2.190734] mmcblk3: p1 p2 p3 p4 Connected. cu: Got hangup signal cu: waitpid: No child processes Connected.
Disconnected.
[PYBOOT] [snowball 02:25]: Timed out waiting for "<type 'str'>":
[PYBOOT] [snowball 02:26]: got exception: timeout ~$off
[PYBOOT] [snowball 02:27]: Done. Board snowball-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
ledtrig-cpu: registered to indicate activity on CPUs usbcore: registered new interface driver usbhid usbhid: USB HID core driver NET: Registered protocol family 10 sit: IPv6 over IPv4 tunneling driver NET: Registered protocol family 17 can: controller area network core (rev 20120528 abi 9) NET: Registered protocol family 29 can: raw protocol (rev 20120528) can: broadcast manager protocol (rev 20120528 t) can: netlink gateway (rev 20130117) max_hops=1 Key type dns_resolver registered ThumbEE CPU extension supported. input: gpio_keys as /devices/soc0/gpio_keys/input/input0 rtc-pl031 80154000.rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) thermal cooling_device0: thermal-cpufreq-0 bind to 0: 0-succeed thermal cooling_device0: thermal-cpufreq-0 bind to 1: 0-succeed thermal cooling_device0: thermal-cpufreq-0 bind to 2: 0-succeed db8500-cpufreq-cooling soc:cpufreq-cooling: Cooling device registered: thermal-cpufreq-0 db8500-esram12: disabling db8500-esram34: disabling en-3v3-fixed-supply: disabling V-CSI/DSI: disabling mmci-reg: disabling uart-pl011 80007000.uart: DMA channel TX dma0chan20 uart-pl011 80007000.uart: DMA channel RX dma0chan21 Waiting for root device /dev/mmcblk0p4... mmc3: new high speed MMC card at address 0001 mmcblk3: mmc3:0001 3.53 GiB mmcblk3boot0: mmc3:0001 partition 1 2.00 MiB mmcblk3boot1: mmc3:0001 partition 2 2.00 MiB mmcblk3rpmb: mmc3:0001 partition 3 128 KiB mmcblk3: p1 p2 p3 p4
[PYBOOT] [snowball 01:56]: Timed out waiting for "<type 'str'>":
[PYBOOT] [snowball 01:57]: got exception: timeout ~$off
[PYBOOT] [snowball 01:59]: Done. Board snowball-arm-u8500_defconfig failure log: -------------------------------------------------
[ 2.658813] coresight-etm3x 801af000.ptm: PTM 1.0 initialized [ 2.693664] ux500-msp-i2s ux500-msp-i2s.1: Failed to get DMA channel capabilities, falling back to period counting: -6 [ 2.704681] snd-soc-mop500 snd-soc-mop500.0: ab8500-codec-dai.0 <-> ux500-msp-i2s.1 mapping ok [ 2.721466] ux500-msp-i2s ux500-msp-i2s.3: Failed to get DMA channel capabilities, falling back to period counting: -6 [ 2.732360] snd-soc-mop500 snd-soc-mop500.0: ab8500-codec-dai.1 <-> ux500-msp-i2s.3 mapping ok [ 2.769317] NET: Registered protocol family 10 [ 2.786834] sit: IPv6 over IPv4 tunneling driver [ 2.794464] NET: Registered protocol family 17 [ 2.799041] NET: Registered protocol family 35 [ 2.804290] NET: Registered protocol family 37 [ 2.809082] Registering SWP/SWPB emulation handler [ 2.830383] input: gpio_keys as /devices/soc0/gpio_keys/input/input1 [ 2.840362] ab8500-rtc ab8500-rtc.0: setting system clock to 2000-04-16 03:21:42 UTC (955855302) [ 2.849609] thermal cooling_device0: thermal-cpufreq-0 bind to 0: 0-succeed [ 2.856628] thermal cooling_device0: thermal-cpufreq-0 bind to 1: 0-succeed [ 2.863647] thermal cooling_device0: thermal-cpufreq-0 bind to 2: 0-succeed [ 2.870666] db8500-cpufreq-cooling soc:cpufreq-cooling: Cooling device registered: thermal-cpufreq-0 [ 2.884307] db8500-esram12: disabling [ 2.888061] db8500-esram34: disabling [ 2.891845] en-3v3-fixed-supply: disabling [ 2.896118] V-CSI/DSI: disabling [ 2.899383] mmci-reg: disabling [ 2.902740] ALSA device list: [ 2.905700] #0: MOP500-card [ 2.908966] uart-pl011 80007000.uart: DMA channel TX dma0chan24 [ 2.914978] uart-pl011 80007000.uart: DMA channel RX dma0chan25 [ 2.921234] Waiting for root device /dev/mmcblk0p4... cu: Got hangup signal Connected. cu: waitpid: No child processes Connected.
Disconnected.
[PYBOOT] [snowball 01:54]: Timed out waiting for "<type 'str'>":
[PYBOOT] [snowball 01:55]: got exception: timeout ~$off
[PYBOOT] [snowball 01:56]: Done.