Full logs are available at http://arm-soc.lixom.net/bootlogs/mainline/v4.6-rc6-165-g9caa7e7/
Failed boards:
arndale arm-multi_v7_nosmp_defconfig : FAILED 15:21.37 bbb arm-omap2plus_defconfig : FAILED 1:55.11 bbb arm-multi_v7_defconfig : FAILED 1:55.31 beagleboard-x15 arm-omap2plus_defconfig : FAILED 1:44.39 beagleboard-x15 arm-multi_v7_defconfig : FAILED 1:44.59 beagleboard-x15 arm-multi_lpae_defconfig : FAILED 1:49.55 beagleboard-x15 arm-multi_v7_nosmp_defconfig : FAILED 2:00.91 chitra powerpc-pasemi_defconfig : BUILD FAILED colombus arm-multi_v7_nosmp_defconfig : FAILED 3:20.67 cosmic arm-imx_v6_v7_defconfig : FAILED 2:01.00 cosmic arm-multi_v7_defconfig : FAILED 2:10.44 cosmic arm-multi_v7_nosmp_defconfig : FAILED 2:23.72 dalmore arm-tegra_defconfig : FAILED 1:49.18 dalmore arm-multi_v7_defconfig : FAILED 2:01.88 dalmore arm-multi_lpae_defconfig : FAILED 2:08.51 dalmore arm-multi_v7_nosmp_defconfig : FAILED 1:53.02 minnowmax minnowmax_defconfig : NO BUILD odroidu3 arm-exynos_defconfig : FAILED 1:51.53 omap5uevm arm-multi_v7_defconfig : FAILED 2:10.01 omap5uevm arm-multi_lpae_defconfig : FAILED 2:11.46 omap5uevm arm-multi_v7_nosmp_defconfig : FAILED 1:08.75 seaboard arm-tegra_defconfig : FAILED 1:48.82 seaboard arm-multi_v7_defconfig : FAILED 1:57.06 snow arm-multi_v7_nosmp_defconfig : FAILED 3:14.94 snowball arm-u8500_defconfig : FAILED 1:57.44 snowball arm-multi_v7_nosmp_defconfig : FAILED 1:59.84 wandboard arm-imx_v6_v7_defconfig : FAILED 2:58.49
Successful boards:
apc arm-vt8500_v6_v7_defconfig : passed 1:16.56 arndale arm-exynos_defconfig : passed 1:32.67 arndale arm-multi_v7_defconfig : passed 1:23.90 arndale arm-multi_lpae_defconfig : passed 1:32.05 capri arm-bcm_defconfig : passed 0:44.89 capri arm-multi_v7_defconfig : passed 0:52.49 capri arm-multi_v7_nosmp_defconfig : warnings 1:07.70 chitra powerpc-ppc64_defconfig : passed 2:11.72 colibri-vf61 arm-imx_v6_v7_defconfig : passed 1:39.88 colibri-vf61 arm-multi_v7_defconfig : passed 1:35.82 colibri-vf61 arm-multi_v7_nosmp_defconfig : passed 1:25.59 colombus arm-sunxi_defconfig : passed 2:20.63 colombus arm-multi_v7_defconfig : passed 3:00.99 colombus arm-multi_lpae_defconfig : passed 2:32.79 cubie arm-sunxi_defconfig : passed 0:57.91 cubie arm-multi_v7_defconfig : passed 0:54.28 cubie arm-multi_v7_nosmp_defconfig : passed 1:01.64 cubie2 arm-sunxi_defconfig : passed 0:49.46 cubie2 arm-multi_v7_defconfig : passed 0:57.13 cubie2 arm-multi_lpae_defconfig : passed 0:56.42 cubie2 arm-multi_v7_nosmp_defconfig : warnings 0:53.66 cubox arm-multi_v7_defconfig : passed 1:18.99 cubox arm-mvebu_v7_defconfig : passed 1:02.94 cubox arm-multi_v7_nosmp_defconfig : passed 1:25.79 hummingboard arm-imx_v6_v7_defconfig : passed 1:35.47 hummingboard arm-multi_v7_defconfig : passed 1:32.90 hummingboard arm-multi_v7_nosmp_defconfig : warnings 1:11.42 jetsontk1 arm-tegra_defconfig : passed 1:33.90 jetsontk1 arm-multi_v7_defconfig : passed 1:44.49 jetsontk1 arm-multi_lpae_defconfig : passed 2:00.51 jetsontk1 arm-multi_v7_nosmp_defconfig : warnings 1:39.02 omap5uevm arm-omap2plus_defconfig : passed 1:04.03 pandaes arm-omap2plus_defconfig : warnings 1:35.83 pandaes arm-multi_v7_defconfig : passed 1:39.66 pandaes arm-multi_v7_nosmp_defconfig : warnings 1:51.57 pi arm-exynos_defconfig : passed 2:09.19 pi arm-multi_v7_defconfig : passed 2:27.54 pi arm-multi_lpae_defconfig : passed 2:36.15 pi arm-multi_v7_nosmp_defconfig : warnings 2:34.91 pit arm-exynos_defconfig : passed 2:10.61 pit arm-multi_v7_defconfig : passed 2:17.06 pit arm-multi_lpae_defconfig : passed 2:20.98 pit arm-multi_v7_nosmp_defconfig : warnings 2:13.20 seattle arm64-defconfig : warnings 2:21.33 snow arm-exynos_defconfig : passed 2:10.47 snow arm-multi_v7_defconfig : passed 2:20.39 snow arm-multi_lpae_defconfig : passed 2:00.30 trimslice arm-tegra_defconfig : passed 1:31.60 trimslice arm-multi_v7_nosmp_defconfig : warnings 1:36.71 wandboard arm-multi_v7_defconfig : passed 1:15.44 wandboard arm-multi_v7_nosmp_defconfig : warnings 1:12.72
Offline boards:
bbb arm-multi_v7_nosmp_defconfig : OFFLINE 1:39.00 beaver arm-tegra_defconfig : OFFLINE 2:12.60 beaver arm-multi_v7_defconfig : OFFLINE 2:18.79 beaver arm-multi_v7_nosmp_defconfig : OFFLINE 2:15.38 parallella arm-multi_v7_defconfig : OFFLINE 2:29.07 parallella arm-multi_v7_nosmp_defconfig : OFFLINE 2:13.60 rk3288evb arm-multi_v7_defconfig : OFFLINE 0:50.29 rk3288evb arm-multi_lpae_defconfig : OFFLINE 1:48.41 rk3288evb arm-multi_v7_nosmp_defconfig : OFFLINE 0:43.50 sama5 arm-sama5_defconfig : OFFLINE 2:14.57 sama5d3-xplained arm-sama5_defconfig : OFFLINE 2:34.00 seaboard arm-multi_v7_nosmp_defconfig : OFFLINE 1:57.44 snowball arm-multi_v7_defconfig : OFFLINE 3:20.82 socfpga arm-socfpga_defconfig : OFFLINE 2:24.62 socfpga arm-multi_v7_defconfig : OFFLINE 2:22.49 socfpga arm-multi_v7_nosmp_defconfig : OFFLINE 2:12.77 trimslice arm-multi_v7_defconfig : OFFLINE 2:28.01
Board legend is available at http://arm-soc.lixom.net/boards.html
Board arndale-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
[ 0.000000] DT /cpu 2 nodes greater than max cores 1, capping them [ 0.000000] Modules linked in: [ 0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 4.6.0-rc6-00165-g9caa7e7 #1 [ 0.000000] Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) [ 0.000000] [<c030e70c>] (unwind_backtrace) from [<c030b298>] (show_stack+0x10/0x14) [ 0.000000] [<c030b298>] (show_stack) from [<c0335fb8>] (__warn+0xe4/0xfc) [ 0.000000] [<c0335fb8>] (__warn) from [<c0336008>] (warn_slowpath_fmt+0x38/0x48) [ 0.000000] [<c0336008>] (warn_slowpath_fmt) from [<c0f04040>] (arm_dt_init_cpu_maps+0xf8/0x134) [ 0.000000] [<c0f04040>] (arm_dt_init_cpu_maps) from [<c0f03368>] (setup_arch+0x780/0x8b8) [ 0.000000] [<c0f03368>] (setup_arch) from [<c0f00940>] (start_kernel+0x68/0x370) [ 0.000000] [<c0f00940>] (start_kernel) from [<40208078>] (0x40208078) [ 0.000000] ---[ end trace cb88537fdc8fa200 ]--- [ 0.000000] CPU: All CPU(s) started in HYP mode. [ 0.000000] CPU: Virtualization extensions available. [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 518656 [ 0.000000] Kernel command line: console=ttySAC2,115200n8 earlyprintk debug root=/dev/mmcblk0p1 rootwait rw [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 1983240K/2080768K available (8421K kernel code, 1020K rwdata, 3600K rodata, 1024K init, 304K bss, 31992K reserved, 65536K cma-reserved, 1245184K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xf0800000 - 0xff800000 ( 240 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf0000000 ( 768 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0208000 - 0xc0ebd690 (13014 kB) [ 0.000000] .init : 0xc0f00000 - 0xc1000000 (1024 kB) [ 0.000000] .data : 0xc1000000 - 0xc10ff180 (1021 kB) [ 0.000000] .bss : 0xc1101000 - 0xc114d390 ( 305 kB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] Exyn [PYBOOT] [arndale 15:16]: got exception: maximum recursion depth exceeded ~$off
[PYBOOT] [arndale 15:17]: Done. Board bbb-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.631327] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.641574] ledtrig-cpu: registered to indicate activity on CPUs [ 1.648675] usbcore: registered new interface driver usbhid [ 1.654599] usbhid: USB HID core driver [ 1.666595] NET: Registered protocol family 10 [ 1.673171] sit: IPv6 over IPv4 tunneling driver [ 1.679304] NET: Registered protocol family 17 [ 1.684078] can: controller area network core (rev 20120528 abi 9) [ 1.690714] NET: Registered protocol family 29 [ 1.695435] can: raw protocol (rev 20120528) [ 1.699957] can: broadcast manager protocol (rev 20120528 t) [ 1.705953] can: netlink gateway (rev 20130117) max_hops=1 [ 1.712719] Key type dns_resolver registered [ 1.717625] omap_voltage_late_init: Voltage driver support not added [ 1.725904] ThumbEE CPU extension supported. [ 1.730538] Registering SWP/SWPB emulation handler [ 1.772880] tps65217 0-0024: TPS65217 ID 0xe version 1.2 [ 1.779425] at24 0-0050: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.787191] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 1.795899] at24 2-0054: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.803832] at24 2-0055: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.811671] at24 2-0056: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.819493] at24 2-0057: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.826850] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz [ 1.835537] cpufreq: cpufreq_online: CPU0: Running at unlisted freq: 550000 KHz [ 1.843448] cpufreq: cpufreq_online: CPU0: Unlisted initial frequency changed to: 600000 KHz [ 1.853184] mmc1: new high speed MMC card at address 0001 [ 1.860433] hctosys: unable to open rtc device (rtc0) [ 1.873439] mmcblk1: mmc1:0001 MMC02G 1.79 GiB [ 1.879487] mmcblk1boot0: mmc1:0001 MMC02G partition 1 1.00 MiB [ 1.886463] mmcblk1boot1: mmc1:0001 MMC02G partition 2 1.00 MiB [ 1.895387] mmcblk1: p1 p2 [ 1.901103] Waiting for root device /dev/mmcblk0p2...
[PYBOOT] [bbb 01:52]: Timed out waiting for "<type 'str'>":
[PYBOOT] [bbb 01:53]: got exception: timeout ~$off
[PYBOOT] [bbb 01:54]: Done. Board bbb-arm-omap2plus_defconfig failure log: -------------------------------------------------
[ 2.047748] omap_hsmmc 481d8000.mmc: lookup for GPIO cd failed [ 2.053884] omap_hsmmc 481d8000.mmc: GPIO lookup for consumer wp [ 2.060229] omap_hsmmc 481d8000.mmc: using device tree for GPIO lookup [ 2.067125] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@481d8000[0]' [ 2.076750] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@481d8000[0]' [ 2.086276] omap_hsmmc 481d8000.mmc: using lookup tables for GPIO lookup [ 2.093314] omap_hsmmc 481d8000.mmc: lookup for GPIO wp failed [ 2.136505] ledtrig-cpu: registered to indicate activity on CPUs [ 2.145207] oprofile: using arm/armv7 [ 2.150290] Initializing XFRM netlink socket [ 2.155368] NET: Registered protocol family 10 [ 2.166048] sit: IPv6 over IPv4 tunneling driver [ 2.174821] NET: Registered protocol family 17 [ 2.179741] NET: Registered protocol family 15 [ 2.185034] Key type dns_resolver registered [ 2.189956] omap_voltage_late_init: Voltage driver support not added [ 2.196691] sr_dev_init: No voltage domain specified for smartreflex0. Cannot initialize [ 2.205183] sr_dev_init: No voltage domain specified for smartreflex1. Cannot initialize [ 2.215449] ThumbEE CPU extension supported. [ 2.220098] Registering SWP/SWPB emulation handler [ 2.225144] SmartReflex Class3 initialized [ 2.293838] tps65217 0-0024: TPS65217 ID 0xe version 1.2 [ 2.301123] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 2.311621] mmc1: new high speed MMC card at address 0001 [ 2.323731] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz [ 2.332021] mmcblk1: mmc1:0001 MMC02G 1.79 GiB [ 2.339830] hctosys: unable to open rtc device (rtc0) [ 2.345151] sr_init: No PMIC hook to init smartreflex [ 2.350931] sr_init: platform driver register failed for SR [ 2.390450] mmcblk1boot0: mmc1:0001 MMC02G partition 1 1.00 MiB [ 2.398436] mmcblk1boot1: mmc1:0001 MMC02G partition 2 1.00 MiB [ 2.412718] mmcblk1: p1 p2 [ 2.430263] Waiting for root device /dev/mmcblk0p2...
[PYBOOT] [bbb 01:52]: Timed out waiting for "<type 'str'>":
[PYBOOT] [bbb 01:53]: got exception: timeout ~$off
[PYBOOT] [bbb 01:54]: Done. Board beagleboard-x15-arm-multi_lpae_defconfig failure log: -------------------------------------------------
[ 1.717214] at24 0-0050: 4096 byte 24c32 EEPROM, writable, 1 bytes/write [ 1.724293] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 1.750478] rtc-ds1307 2-006f: SET TIME! [ 1.756214] rtc-ds1307 2-006f: rtc core: registered mcp7941x as rtc0 [ 1.762970] rtc-ds1307 2-006f: 64 bytes nvram [ 1.767588] omap_i2c 48060000.i2c: bus 2 rev0.12 at 400 kHz [ 1.775788] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 1.781576] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 [ 1.789826] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x00010010 [ 1.798991] xhci-hcd xhci-hcd.0.auto: irq 400, io mem 0x48890000 [ 1.805862] hub 1-0:1.0: USB hub found [ 1.809821] hub 1-0:1.0: 1 port detected [ 1.814228] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 1.820012] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 [ 1.828123] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.837138] hub 2-0:1.0: USB hub found [ 1.841108] hub 2-0:1.0: 1 port detected [ 1.847139] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 1.881101] vdd_3v3: supplied by regen1 [ 1.918297] rtc-ds1307 2-006f: setting system clock to 2001-01-01 00:00:00 UTC (978307200) [ 1.935158] aic_dvdd_fixed: disabling [ 1.939738] Waiting for root device /dev/mmcblk0p1... [ 1.967034] mmc1: new high speed MMC card at address 0001 [ 1.973010] mmcblk1: mmc1:0001 S10004 3.56 GiB [ 1.977901] mmcblk1boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 1.984244] mmcblk1boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 1.991104] mmcblk1: p1 [ 2.119979] usb 1-1: new high-speed USB device number 2 using xhci-hcd [ 2.155006] usb 2-1: new SuperSpeed USB device number 2 using xhci-hcd [ 2.180236] hub 2-1:1.0: USB hub found [ 2.184214] hub 2-1:1.0: 4 ports detected [ 2.276258] hub 1-1:1.0: USB hub found [ 2.280242] hub 1-1:1.0: 4 ports detected
[PYBOOT] [beagleboard-x15 01:45]: Timed out waiting for "<type 'str'>":
[PYBOOT] [beagleboard-x15 01:46]: got exception: timeout ~$off
[PYBOOT] [beagleboard-x15 01:48]: Done. Board beagleboard-x15-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.717066] at24 0-0050: 4096 byte 24c32 EEPROM, writable, 1 bytes/write [ 1.724149] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 1.750471] rtc-ds1307 2-006f: SET TIME! [ 1.756204] rtc-ds1307 2-006f: rtc core: registered mcp7941x as rtc0 [ 1.762960] rtc-ds1307 2-006f: 64 bytes nvram [ 1.767576] omap_i2c 48060000.i2c: bus 2 rev0.12 at 400 kHz [ 1.775788] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 1.781581] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 [ 1.789833] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x00010010 [ 1.799003] xhci-hcd xhci-hcd.0.auto: irq 400, io mem 0x48890000 [ 1.805873] hub 1-0:1.0: USB hub found [ 1.809835] hub 1-0:1.0: 1 port detected [ 1.814231] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 1.820003] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 [ 1.828113] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.837122] hub 2-0:1.0: USB hub found [ 1.841088] hub 2-0:1.0: 1 port detected [ 1.847116] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 1.881094] vdd_3v3: supplied by regen1 [ 1.919164] rtc-ds1307 2-006f: setting system clock to 2001-01-01 00:00:00 UTC (978307200) [ 1.937078] aic_dvdd_fixed: disabling [ 1.941812] Waiting for root device /dev/mmcblk0p1... [ 1.968987] mmc1: new high speed MMC card at address 0001 [ 1.974971] mmcblk1: mmc1:0001 S10004 3.56 GiB [ 1.979837] mmcblk1boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 1.986173] mmcblk1boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 1.993039] mmcblk1: p1 [ 2.119971] usb 1-1: new high-speed USB device number 2 using xhci-hcd [ 2.154995] usb 2-1: new SuperSpeed USB device number 2 using xhci-hcd [ 2.180225] hub 2-1:1.0: USB hub found [ 2.184204] hub 2-1:1.0: 4 ports detected [ 2.276245] hub 1-1:1.0: USB hub found [ 2.280235] hub 1-1:1.0: 4 ports detected
[PYBOOT] [beagleboard-x15 01:41]: Timed out waiting for "<type 'str'>":
[PYBOOT] [beagleboard-x15 01:42]: got exception: timeout ~$off
[PYBOOT] [beagleboard-x15 01:44]: Done. Board beagleboard-x15-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
[ 1.591230] at24 0-0050: 4096 byte 24c32 EEPROM, writable, 1 bytes/write [ 1.598270] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 1.623590] rtc-ds1307 2-006f: SET TIME! [ 1.629205] rtc-ds1307 2-006f: rtc core: registered mcp7941x as rtc0 [ 1.635912] rtc-ds1307 2-006f: 64 bytes nvram [ 1.640491] omap_i2c 48060000.i2c: bus 2 rev0.12 at 400 kHz [ 1.647873] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 1.653636] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 [ 1.661836] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x00010010 [ 1.670966] xhci-hcd xhci-hcd.0.auto: irq 400, io mem 0x48890000 [ 1.677685] hub 1-0:1.0: USB hub found [ 1.681636] hub 1-0:1.0: 1 port detected [ 1.685955] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 1.691710] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 [ 1.699790] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.708653] hub 2-0:1.0: USB hub found [ 1.712590] hub 2-0:1.0: 1 port detected [ 1.717841] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 1.753824] vdd_3v3: supplied by regen1 [ 1.784922] rtc-ds1307 2-006f: setting system clock to 2001-01-01 00:00:00 UTC (978307200) [ 1.797914] aic_dvdd_fixed: disabling [ 1.803296] Waiting for root device /dev/mmcblk0p1... [ 1.850133] mmc1: new high speed MMC card at address 0001 [ 1.856004] mmcblk1: mmc1:0001 S10004 3.56 GiB [ 1.860836] mmcblk1boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 1.867136] mmcblk1boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 1.873922] mmcblk1: p1 [ 1.993128] usb 1-1: new high-speed USB device number 2 using xhci-hcd [ 2.023149] usb 2-1: new SuperSpeed USB device number 2 using xhci-hcd [ 2.051890] hub 2-1:1.0: USB hub found [ 2.055868] hub 2-1:1.0: 4 ports detected [ 2.147892] hub 1-1:1.0: USB hub found [ 2.151861] hub 1-1:1.0: 4 ports detected
[PYBOOT] [beagleboard-x15 01:57]: Timed out waiting for "<type 'str'>":
[PYBOOT] [beagleboard-x15 01:58]: got exception: timeout ~$off
[PYBOOT] [beagleboard-x15 02:00]: Done. Board beagleboard-x15-arm-omap2plus_defconfig failure log: -------------------------------------------------
[ 2.175422] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 2.182296] of_get_named_gpiod_flags: parsed 'cd-gpios' property of node '/ocp/mmc@4809c000[0]' - status (0) [ 2.192692] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 2.197551] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer wp [ 2.203865] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 2.210719] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@4809c000[0]' [ 2.220318] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@4809c000[0]' [ 2.229828] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 2.236891] omap_hsmmc 4809c000.mmc: lookup for GPIO wp failed [ 2.283933] omap_hsmmc 480b4000.mmc: GPIO lookup for consumer cd [ 2.290237] omap_hsmmc 480b4000.mmc: using device tree for GPIO lookup [ 2.297113] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/ocp/mmc@480b4000[0]' [ 2.306719] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/ocp/mmc@480b4000[0]' [ 2.316217] omap_hsmmc 480b4000.mmc: using lookup tables for GPIO lookup [ 2.323260] omap_hsmmc 480b4000.mmc: lookup for GPIO cd failed [ 2.329380] omap_hsmmc 480b4000.mmc: GPIO lookup for consumer wp [ 2.335687] omap_hsmmc 480b4000.mmc: using device tree for GPIO lookup [ 2.342543] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@480b4000[0]' [ 2.352136] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@480b4000[0]' [ 2.361631] omap_hsmmc 480b4000.mmc: using lookup tables for GPIO lookup [ 2.368670] omap_hsmmc 480b4000.mmc: lookup for GPIO wp failed [ 2.375372] vdd_3v3: supplied by regen1 [ 2.414018] hctosys: unable to open rtc device (rtc0) [ 2.419322] sr_init: No PMIC hook to init smartreflex [ 2.424824] sr_init: platform driver register failed for SR [ 2.465665] mmc1: new high speed MMC card at address 0001 [ 2.472430] aic_dvdd_fixed: disabling [ 2.473618] mmcblk1: mmc1:0001 S10004 3.56 GiB [ 2.474372] mmcblk1boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 2.475018] mmcblk1boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 2.484737] mmcblk1: p1 [ 2.496460] ldousb: disabling [ 2.502468] Waiting for root device /dev/mmcblk0p1...
[PYBOOT] [beagleboard-x15 01:41]: Timed out waiting for "<type 'str'>":
[PYBOOT] [beagleboard-x15 01:42]: got exception: timeout ~$off
[PYBOOT] [beagleboard-x15 01:43]: Done. Board colombus-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
[....] Synthesizing the initial hotplug events...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Waiting for /dev to be fully populated...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Activating swap...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [ 41.922959] EXT4-fs (mmcblk0p1): warning: mounting fs with errors, running e2fsck is recommended [ 41.937487] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [....] Cleaning up temporary files... /tmp[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] Activating lvm and md swap...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Checking file systems...fsck from util-linux 2.20.1 [?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Mounting local filesystems...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Activating swapfile swap...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Cleaning up temporary files...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] Setting kernel variables ...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [ 85.465324] random: dd urandom read with 57 bits of entropy available [....] Configuring network interfaces...Internet Systems Consortium DHCP Client 4.2.2 Copyright 2004-2011 Internet Systems Consortium. All rights reserved. For info, please visit https://www.isc.org/software/dhcp/
[ 89.867484] eth0: device MAC address fe:37:a2:86:57:e1 [ 90.024983] RX IPC Checksum Offload disabled [ 90.029595] No MAC Management Counters available [ 90.035356] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready Listening on LPF/eth0/fe:37:a2:86:57:e1 Sending on LPF/eth0/fe:37:a2:86:57:e1 Sending on Socket/fallback DHCPREQUEST on eth0 to 255.255.255.255 port 67 DHCPREQUEST on eth0 to 255.255.255.255 port 67 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 6 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 15 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 8 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 14 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 13
[PYBOOT] [colombus 03:18]: Timed out waiting for "<type 'str'>":
[PYBOOT] [colombus 03:19]: got exception: timeout ~$off
[PYBOOT] [colombus 03:20]: Done. Board cosmic-arm-imx_v6_v7_defconfig failure log: -------------------------------------------------
[ 14.421488] blk_update_request: I/O error, dev mmcblk0, sector 3633185 [ 18.495725] mmcblk0: error -110 transferring data, sector 3633186, nr 230, cmd response 0x900, card status 0x0 [ 18.505834] blk_update_request: I/O error, dev mmcblk0, sector 3633186 [ 22.580025] mmcblk0: error -110 transferring data, sector 3633187, nr 229, cmd response 0x900, card status 0x0 [ 22.590135] blk_update_request: I/O error, dev mmcblk0, sector 3633187 [ 26.664388] mmcblk0: error -110 transferring data, sector 3633188, nr 228, cmd response 0x900, card status 0x0 [ 26.674499] blk_update_request: I/O error, dev mmcblk0, sector 3633188 [ 30.748686] mmcblk0: error -110 transferring data, sector 3633189, nr 227, cmd response 0x900, card status 0x0 [ 30.758819] blk_update_request: I/O error, dev mmcblk0, sector 3633189 [ 34.833164] mmcblk0: error -110 transferring data, sector 3633190, nr 226, cmd response 0x900, card status 0x0 [ 34.843278] blk_update_request: I/O error, dev mmcblk0, sector 3633190 [ 38.917514] mmcblk0: error -110 transferring data, sector 3633191, nr 225, cmd response 0x900, card status 0x0 [ 38.927623] blk_update_request: I/O error, dev mmcblk0, sector 3633191 [ 43.001888] mmcblk0: error -110 transferring data, sector 3633192, nr 224, cmd response 0x900, card status 0x0 [ 43.012005] blk_update_request: I/O error, dev mmcblk0, sector 3633192 [ 47.086234] mmcblk0: error -110 transferring data, sector 3633193, nr 223, cmd response 0x900, card status 0x0 [ 47.096342] blk_update_request: I/O error, dev mmcblk0, sector 3633193 [ 51.170516] mmcblk0: error -110 transferring data, sector 3633194, nr 222, cmd response 0x900, card status 0x0 [ 51.180617] blk_update_request: I/O error, dev mmcblk0, sector 3633194 [ 55.254844] mmcblk0: error -110 transferring data, sector 3633195, nr 221, cmd response 0x900, card status 0x0 [ 55.264946] blk_update_request: I/O error, dev mmcblk0, sector 3633195 [ 59.339121] mmcblk0: error -110 transferring data, sector 3633196, nr 220, cmd response 0x900, card status 0x0 [ 59.349230] blk_update_request: I/O error, dev mmcblk0, sector 3633196 [ 63.423469] mmcblk0: error -110 transferring data, sector 3633197, nr 219, cmd response 0x900, card status 0x0 [ 63.433576] blk_update_request: I/O error, dev mmcblk0, sector 3633197 [ 67.507803] mmcblk0: error -110 transferring data, sector 3633198, nr 218, cmd response 0x900, card status 0x0 [ 67.517913] blk_update_request: I/O error, dev mmcblk0, sector 3633198 [ 71.592150] mmcblk0: error -110 transferring data, sector 3633199, nr 217, cmd response 0x900, card status 0x0 [ 71.602257] blk_update_request: I/O error, dev mmcblk0, sector 3633199 [ 75.676501] mmcblk0: error -110 transferring data, sector 3633200, nr 216, cmd response 0x900, card status 0x0 [ 75.686613] blk_update_request: I/O error, dev mmcblk0, sector 3633200 [ 79.760791] mmcblk0: error -110 transferring data, sector 3633201, nr 215, cmd response 0x900, card status 0x0 [ 79.770897] blk_update_request: I/O error, dev mmcblk0, sector 3633201
[PYBOOT] [cosmic 01:58]: Timed out waiting for "<type 'str'>":
[PYBOOT] [cosmic 01:59]: got exception: timeout ~$off
[PYBOOT] [cosmic 02:00]: Done. Board cosmic-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 14.078916] blk_update_request: I/O error, dev mmcblk0, sector 3633185 [ 18.152902] mmcblk0: error -110 transferring data, sector 3633186, nr 230, cmd response 0x900, card status 0x0 [ 18.162976] blk_update_request: I/O error, dev mmcblk0, sector 3633186 [ 22.236960] mmcblk0: error -110 transferring data, sector 3633187, nr 229, cmd response 0x900, card status 0x0 [ 22.247036] blk_update_request: I/O error, dev mmcblk0, sector 3633187 [ 26.321015] mmcblk0: error -110 transferring data, sector 3633188, nr 228, cmd response 0x900, card status 0x0 [ 26.331096] blk_update_request: I/O error, dev mmcblk0, sector 3633188 [ 30.405081] mmcblk0: error -110 transferring data, sector 3633189, nr 227, cmd response 0x900, card status 0x0 [ 30.415163] blk_update_request: I/O error, dev mmcblk0, sector 3633189 [ 34.489154] mmcblk0: error -110 transferring data, sector 3633190, nr 226, cmd response 0x900, card status 0x0 [ 34.499234] blk_update_request: I/O error, dev mmcblk0, sector 3633190 [ 38.573224] mmcblk0: error -110 transferring data, sector 3633191, nr 225, cmd response 0x900, card status 0x0 [ 38.583288] blk_update_request: I/O error, dev mmcblk0, sector 3633191 [ 42.657273] mmcblk0: error -110 transferring data, sector 3633192, nr 224, cmd response 0x900, card status 0x0 [ 42.667340] blk_update_request: I/O error, dev mmcblk0, sector 3633192 [ 46.741329] mmcblk0: error -110 transferring data, sector 3633193, nr 223, cmd response 0x900, card status 0x0 [ 46.751400] blk_update_request: I/O error, dev mmcblk0, sector 3633193 [ 50.825445] mmcblk0: error -110 transferring data, sector 3633194, nr 222, cmd response 0x900, card status 0x0 [ 50.835514] blk_update_request: I/O error, dev mmcblk0, sector 3633194 [ 54.909500] mmcblk0: error -110 transferring data, sector 3633195, nr 221, cmd response 0x900, card status 0x0 [ 54.919572] blk_update_request: I/O error, dev mmcblk0, sector 3633195 [ 58.993559] mmcblk0: error -110 transferring data, sector 3633196, nr 220, cmd response 0x900, card status 0x0 [ 59.003630] blk_update_request: I/O error, dev mmcblk0, sector 3633196 [ 63.077615] mmcblk0: error -110 transferring data, sector 3633197, nr 219, cmd response 0x900, card status 0x0 [ 63.087691] blk_update_request: I/O error, dev mmcblk0, sector 3633197 [ 67.161670] mmcblk0: error -110 transferring data, sector 3633198, nr 218, cmd response 0x900, card status 0x0 [ 67.171744] blk_update_request: I/O error, dev mmcblk0, sector 3633198 [ 71.245723] mmcblk0: error -110 transferring data, sector 3633199, nr 217, cmd response 0x900, card status 0x0 [ 71.255803] blk_update_request: I/O error, dev mmcblk0, sector 3633199 [ 75.329785] mmcblk0: error -110 transferring data, sector 3633200, nr 216, cmd response 0x900, card status 0x0 [ 75.339862] blk_update_request: I/O error, dev mmcblk0, sector 3633200 [ 79.413840] mmcblk0: error -110 transferring data, sector 3633201, nr 215, cmd response 0x900, card status 0x0 [ 79.423923] blk_update_request: I/O error, dev mmcblk0, sector 3633201
[PYBOOT] [cosmic 02:06]: Timed out waiting for "<type 'str'>":
[PYBOOT] [cosmic 02:07]: got exception: timeout ~$off
[PYBOOT] [cosmic 02:09]: Done. Board cosmic-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
[ 13.873017] blk_update_request: I/O error, dev mmcblk0, sector 3633185 [ 17.946925] mmcblk0: error -110 transferring data, sector 3633186, nr 230, cmd response 0x900, card status 0x0 [ 17.956983] blk_update_request: I/O error, dev mmcblk0, sector 3633186 [ 22.030901] mmcblk0: error -110 transferring data, sector 3633187, nr 229, cmd response 0x900, card status 0x0 [ 22.040956] blk_update_request: I/O error, dev mmcblk0, sector 3633187 [ 26.114871] mmcblk0: error -110 transferring data, sector 3633188, nr 228, cmd response 0x900, card status 0x0 [ 26.124929] blk_update_request: I/O error, dev mmcblk0, sector 3633188 [ 30.198847] mmcblk0: error -110 transferring data, sector 3633189, nr 227, cmd response 0x900, card status 0x0 [ 30.208903] blk_update_request: I/O error, dev mmcblk0, sector 3633189 [ 34.282819] mmcblk0: error -110 transferring data, sector 3633190, nr 226, cmd response 0x900, card status 0x0 [ 34.292879] blk_update_request: I/O error, dev mmcblk0, sector 3633190 [ 38.366802] mmcblk0: error -110 transferring data, sector 3633191, nr 225, cmd response 0x900, card status 0x0 [ 38.376858] blk_update_request: I/O error, dev mmcblk0, sector 3633191 [ 42.450783] mmcblk0: error -110 transferring data, sector 3633192, nr 224, cmd response 0x900, card status 0x0 [ 42.460849] blk_update_request: I/O error, dev mmcblk0, sector 3633192 [ 46.534762] mmcblk0: error -110 transferring data, sector 3633193, nr 223, cmd response 0x900, card status 0x0 [ 46.544807] blk_update_request: I/O error, dev mmcblk0, sector 3633193 [ 50.618718] mmcblk0: error -110 transferring data, sector 3633194, nr 222, cmd response 0x900, card status 0x0 [ 50.628772] blk_update_request: I/O error, dev mmcblk0, sector 3633194 [ 54.702681] mmcblk0: error -110 transferring data, sector 3633195, nr 221, cmd response 0x900, card status 0x0 [ 54.712737] blk_update_request: I/O error, dev mmcblk0, sector 3633195 [ 58.786645] mmcblk0: error -110 transferring data, sector 3633196, nr 220, cmd response 0x900, card status 0x0 [ 58.796692] blk_update_request: I/O error, dev mmcblk0, sector 3633196 [ 62.870599] mmcblk0: error -110 transferring data, sector 3633197, nr 219, cmd response 0x900, card status 0x0 [ 62.880671] blk_update_request: I/O error, dev mmcblk0, sector 3633197 [ 66.954580] mmcblk0: error -110 transferring data, sector 3633198, nr 218, cmd response 0x900, card status 0x0 [ 66.964631] blk_update_request: I/O error, dev mmcblk0, sector 3633198 [ 71.038547] mmcblk0: error -110 transferring data, sector 3633199, nr 217, cmd response 0x900, card status 0x0 [ 71.048604] blk_update_request: I/O error, dev mmcblk0, sector 3633199 [ 75.122521] mmcblk0: error -110 transferring data, sector 3633200, nr 216, cmd response 0x900, card status 0x0 [ 75.132578] blk_update_request: I/O error, dev mmcblk0, sector 3633200 [ 79.206487] mmcblk0: error -110 transferring data, sector 3633201, nr 215, cmd response 0x900, card status 0x0 [ 79.216542] blk_update_request: I/O error, dev mmcblk0, sector 3633201
[PYBOOT] [cosmic 02:20]: Timed out waiting for "<type 'str'>":
[PYBOOT] [cosmic 02:21]: got exception: timeout ~$off
[PYBOOT] [cosmic 02:22]: Done. Board dalmore-arm-multi_lpae_defconfig failure log: -------------------------------------------------
[ 2.486142] Key type dns_resolver registered [ 2.492551] ThumbEE CPU extension supported. [ 2.496973] Registering SWP/SWPB emulation handler [ 2.521207] vdd-sys-5v0: supplied by vdd_ac_bat [ 2.528923] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 2.540139] vdd_hdmi_5v0: supplied by vdd-sys-5v0 [ 2.554700] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.561448] [drm] No driver support for vblank timestamp query. [ 2.586718] mmc1: new high speed MMC card at address 0001 [ 2.595692] mmcblk1: mmc1:0001 SEM32G 29.1 GiB [ 2.602759] mmcblk1boot0: mmc1:0001 SEM32G partition 1 4.00 MiB [ 2.609981] mmcblk1boot1: mmc1:0001 SEM32G partition 2 4.00 MiB [ 2.617930] mmcblk1rpmb: mmc1:0001 SEM32G partition 3 4.00 MiB [ 2.627656] mmcblk1: p1 [ 2.738654] Console: switching to colour frame buffer device 240x75 [ 2.825916] drm drm: fb0: frame buffer device [ 2.843920] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 2.854070] usb2_vbus: supplied by vdd-sys-5v0 [ 2.865835] tegra-ehci 7d008000.usb: EHCI Host Controller [ 2.871434] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 2.880193] tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 [ 2.893928] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 2.904202] hub 1-0:1.0: USB hub found [ 2.908192] hub 1-0:1.0: 1 port detected [ 2.918677] input: gpio-keys as /devices/soc0/gpio-keys/input/input0 [ 2.932865] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 2.994633] dvdd_ts: disabling [ 2.997734] usb1_vbus: disabling [ 3.001100] vdd_cam_1v8_reg: disabling [ 3.008466] Waiting for root device /dev/mmcblk0p1... [ 3.223929] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 4.202142] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f [ 65.034062] random: nonblocking pool is initialized
[PYBOOT] [dalmore 02:05]: Timed out waiting for "<type 'str'>":
[PYBOOT] [dalmore 02:06]: got exception: timeout ~$off
[PYBOOT] [dalmore 02:07]: Done. Board dalmore-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 2.486103] Key type dns_resolver registered [ 2.492507] ThumbEE CPU extension supported. [ 2.496939] Registering SWP/SWPB emulation handler [ 2.526090] vdd-sys-5v0: supplied by vdd_ac_bat [ 2.533320] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 2.543841] vdd_hdmi_5v0: supplied by vdd-sys-5v0 [ 2.559128] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.565908] [drm] No driver support for vblank timestamp query. [ 2.591934] mmc1: new high speed MMC card at address 0001 [ 2.601095] mmcblk1: mmc1:0001 SEM32G 29.1 GiB [ 2.607737] mmcblk1boot0: mmc1:0001 SEM32G partition 1 4.00 MiB [ 2.616800] mmcblk1boot1: mmc1:0001 SEM32G partition 2 4.00 MiB [ 2.625516] mmcblk1rpmb: mmc1:0001 SEM32G partition 3 4.00 MiB [ 2.635682] mmcblk1: p1 [ 2.743111] Console: switching to colour frame buffer device 240x75 [ 2.830464] drm drm: fb0: frame buffer device [ 2.848804] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 2.858935] usb2_vbus: supplied by vdd-sys-5v0 [ 2.870610] tegra-ehci 7d008000.usb: EHCI Host Controller [ 2.876198] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 2.885090] tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 [ 2.898819] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 2.909212] hub 1-0:1.0: USB hub found [ 2.913218] hub 1-0:1.0: 1 port detected [ 2.923312] input: gpio-keys as /devices/soc0/gpio-keys/input/input0 [ 2.937140] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 2.999174] dvdd_ts: disabling [ 3.002274] usb1_vbus: disabling [ 3.005631] vdd_cam_1v8_reg: disabling [ 3.012980] Waiting for root device /dev/mmcblk0p1... [ 3.223818] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 4.202187] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f [ 49.848780] random: nonblocking pool is initialized
[PYBOOT] [dalmore 01:58]: Timed out waiting for "<type 'str'>":
[PYBOOT] [dalmore 01:59]: got exception: timeout ~$off
[PYBOOT] [dalmore 02:00]: Done. Board dalmore-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
[ 2.036182] can: broadcast manager protocol (rev 20120528 t) [ 2.041932] can: netlink gateway (rev 20130117) max_hops=1 [ 2.048575] Key type dns_resolver registered [ 2.053712] ThumbEE CPU extension supported. [ 2.084599] vdd-sys-5v0: supplied by vdd_ac_bat [ 2.089534] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 2.099640] vdd_hdmi_5v0: supplied by vdd-sys-5v0 [ 2.119813] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.126484] [drm] No driver support for vblank timestamp query. [ 2.291463] Console: switching to colour frame buffer device 240x75 [ 2.377334] drm drm: fb0: frame buffer device [ 2.381966] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 2.389984] usb2_vbus: supplied by vdd-sys-5v0 [ 2.395947] mmc1: new high speed MMC card at address 0001 [ 2.405168] tegra-ehci 7d008000.usb: EHCI Host Controller [ 2.410748] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 2.418833] mmcblk1: mmc1:0001 SEM32G 29.1 GiB [ 2.423861] mmcblk1boot0: mmc1:0001 SEM32G partition 1 4.00 MiB [ 2.430579] tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 [ 2.436659] mmcblk1boot1: mmc1:0001 SEM32G partition 2 4.00 MiB [ 2.443041] mmcblk1rpmb: mmc1:0001 SEM32G partition 3 4.00 MiB [ 2.449886] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 2.458084] mmcblk1: p1 [ 2.461972] hub 1-0:1.0: USB hub found [ 2.470393] hub 1-0:1.0: 1 port detected [ 2.478539] input: gpio-keys as /devices/soc0/gpio-keys/input/input0 [ 2.489861] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 2.523863] dvdd_ts: disabling [ 2.527015] usb1_vbus: disabling [ 2.530326] vdd_cam_1v8_reg: disabling [ 2.535763] Waiting for root device /dev/mmcblk0p1... [ 2.784447] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 3.735498] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f
[PYBOOT] [dalmore 01:50]: Timed out waiting for "<type 'str'>":
[PYBOOT] [dalmore 01:51]: got exception: timeout ~$off
[PYBOOT] [dalmore 01:52]: Done. Board dalmore-arm-tegra_defconfig failure log: -------------------------------------------------
[ 2.655365] Bluetooth: RFCOMM ver 1.11 [ 2.659304] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 2.664698] Bluetooth: BNEP socket layer initialized [ 2.669782] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 2.675778] Bluetooth: HIDP socket layer initialized [ 2.682732] Key type dns_resolver registered [ 2.692383] Registering SWP/SWPB emulation handler [ 2.724978] vdd-sys-5v0: supplied by vdd_ac_bat [ 2.731457] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 2.742356] vdd_hdmi_5v0: supplied by vdd-sys-5v0 [ 2.766393] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.773223] [drm] No driver support for vblank timestamp query. [ 2.950688] Console: switching to colour frame buffer device 240x75 [ 3.037817] drm drm: fb0: frame buffer device [ 3.068288] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.075512] usb2_vbus: supplied by vdd-sys-5v0 [ 3.084869] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.090671] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 3.099776] tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 [ 3.118586] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 3.132078] hub 1-0:1.0: USB hub found [ 3.136152] hub 1-0:1.0: 1 port detected [ 3.150246] input: gpio-keys as /devices/soc0/gpio-keys/input/input1 [ 3.164379] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:01 UTC (946684801) [ 3.252266] dvdd_ts: disabling [ 3.255371] usb1_vbus: disabling [ 3.258755] vdd_cam_1v8_reg: disabling [ 3.263424] ALSA device list: [ 3.266416] #0: NVIDIA Tegra Dalmore [ 3.272267] Waiting for root device /dev/mmcblk0p1... [ 3.458284] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 4.492416] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f [ 63.349699] random: nonblocking pool is initialized
[PYBOOT] [dalmore 01:46]: Timed out waiting for "<type 'str'>":
[PYBOOT] [dalmore 01:47]: got exception: timeout ~$off
[PYBOOT] [dalmore 01:48]: Done. Board odroidu3-arm-exynos_defconfig failure log: -------------------------------------------------
[ 1.634859] dwmmc_exynos 12550000.mmc: DW MMC controller at irq 107,32 bit host data width,128 deep fifo [ 1.642412] usb 1-3: new high-speed USB device number 2 using exynos-ehci [ 1.651325] dwmmc_exynos 12550000.mmc: allocated mmc-pwrseq [ 1.682454] dwmmc_exynos 12550000.mmc: 1 slots initialized [ 1.683622] usbcore: registered new interface driver usbhid [ 1.688871] usbhid: USB HID core driver [ 1.697566] NET: Registered protocol family 10 [ 1.698188] sit: IPv6 over IPv4 tunneling driver [ 1.701399] NET: Registered protocol family 17 [ 1.705430] NET: Registered protocol family 15 [ 1.709889] Key type dns_resolver registered [ 1.714218] Registering SWP/SWPB emulation handler [ 1.720039] s3c-rtc 10070000.rtc: rtc disabled, re-enabling [ 1.724604] s3c-rtc 10070000.rtc: rtc core: registered s3c as rtc1 [ 1.746201] mmc_host mmc1: Bus speed (slot 0) = 44000000Hz (slot req 52000000Hz, actual 44000000HZ div = 0) [ 1.750446] mmc_host mmc1: Bus speed (slot 0) = 73333333Hz (slot req 52000000Hz, actual 36666666HZ div = 1) [ 1.752974] max98090 1-0010: MAX98090 REVID=0x43 [ 1.755192] max98090 1-0010: use default 2.8v micbias [ 1.769948] mmc1: new DDR MMC card at address 0001 [ 1.775347] mmcblk1: mmc1:0001 008G92 7.28 GiB [ 1.775627] asoc-simple-card sound: HiFi <-> 3830000.i2s mapping ok [ 1.778592] input: gpio_keys as /devices/platform/gpio_keys/input/input0 [ 1.792112] mmcblk1boot0: mmc1:0001 008G92 partition 1 4.00 MiB [ 1.798055] mmcblk1boot1: mmc1:0001 008G92 partition 2 4.00 MiB [ 1.803872] mmcblk1rpmb: mmc1:0001 008G92 partition 3 512 KiB [ 1.810443] mmcblk1: p1 p2 [ 1.824618] max77686-rtc max77686-rtc: setting system clock to 2000-01-01 01:00:20 UTC (946688420) [ 1.843640] VDD10_HDMI_1.0V: disabling [ 1.844333] vdd_g3d: disabling [ 1.845406] BUCK8_2.8V: disabling [ 1.84q405] ALSA device list: [ 1.851025] #0: Odroid-U3 [ 1.854743] Waiting for root device /dev/mmcblk0p2...
[PYBOOT] [odroidu3 01:48]: Timed out waiting for "<type 'str'>":
[PYBOOT] [odroidu3 01:49]: got exception: timeout ~$off
[PYBOOT] [odroidu3 01:51]: Done. Board omap5uevm-arm-multi_lpae_defconfig failure log: -------------------------------------------------
[ 2.598163] 7de0: 00000100 00000000 ee6f8700 00000040 00001388 00000002 ee711400 00000002 [ 2.606732] 7e00: 00000032 ee513800 00000003 00000003 ee513c00 00000000 c0f82678 c0f82580 [ 2.615300] 7e20: c0edb37c c08c9d04 00030003 ee711400 ee634400 00000002 00000000 ee513c00 [ 2.623857] 7e40: ee513800 ee71169c ee6349a4 c08cf344 00000000 00000000 ee634800 c1453114 [ 2.632427] 7e60: ee513800 00000003 00000064 c143b968 00000002 00000001 ee634514 ee6349a4 [ 2.640995] 7e80: ee6349a4 00000000 00000501 00000001 00000002 00000001 ee634514 c08cfe18 [ 2.649564] 7ea0: ee637ee2 00000000 ee634200 ee634400 ee513ca4 ee634438 ee634808 ee634444 [ 2.658132] 7ec0: ee63443c ee634220 00000000 ee513c00 ee0b4200 c0f62864 c0f82b48 c0f82b70 [ 2.666699] 7ee0: 00010501 eefd8e40 ee637efc ee634514 ee0b4200 eefd8e40 00000000 eefdd900 [ 2.675257] 7f00: 00000000 eefd8e40 ee0b4200 c0356718 c1302100 eefd8e58 eefd8e40 ee0b4218 [ 2.683819] 7f20: 00000008 c1302100 eefd8e58 ee636000 eefd8e40 c03575f4 ee059e80 ee0b4200 [ 2.692393] 7f40: c035734c 00000000 ee059e80 ee0b4200 c035734c 00000000 00000000 00000000 [ 2.700960] 7f60: 00000000 c035c140 00000000 00000000 42480427 ee0b4200 00000000 00000000 [ 2.709531] 7f80: ee637f80 ee637f80 00000000 00000000 ee637f90 ee637f90 ee059e80 ee059e80 [ 2.718103] 7fa0: c035c064 00000000 00000000 c0307d38 00000000 00000000 00000000 00000000 [ 2.726661] 7fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 2.735222] 7fe0: 00000000 00000000 00000000 00000000 00000013 00000000 3015c023 71808600 [ 2.743785] [<c0370b30>] (idle_balance) from [<c0371510>] (pick_next_task_fair+0x14/0x178) [ 2.752455] [<c0371510>] (pick_next_task_fair) from [<c0b51bfc>] (__schedule+0xf0/0x590) [ 2.760930] [<c0b51bfc>] (__schedule) from [<c0b520e0>] (schedule+0x44/0x9c) [ 2.768318] [<c0b520e0>] (schedule) from [<c0b54a9c>] (schedule_timeout+0x124/0x1b0) [ 2.776432] [<c0b54a9c>] (schedule_timeout) from [<c0b52c18>] (wait_for_common+0xa8/0x16c) [ 2.785095] [<c0b52c18>] (wait_for_common) from [<c08d4d90>] (usb_start_wait_urb+0x68/0xbc) [ 2.793853] [<c08d4d90>] (usb_start_wait_urb) from [<c08d4e84>] (usb_control_msg+0xa0/0xcc) [ 2.802605] [<c08d4e84>] (usb_control_msg) from [<c08cc5a8>] (hub_port_init+0x3fc/0xb10) [ 2.811087] [<c08cc5a8>] (hub_port_init) from [<c08cf344>] (hub_port_connect+0x150/0x884) [ 2.819656] [<c08cf344>] (hub_port_connect) from [<c08cfe18>] (hub_event+0x3a0/0x794) [ 2.827860] [<c08cfe18>] (hub_event) from [<c0356718>] (process_one_work+0x1ec/0x410) [ 2.836067] [<c0356718>] (process_one_work) from [<c03575f4>] (worker_thread+0x2a8/0x594) [ 2.844634] [<c03575f4>] (worker_thread) from [<c035c140>] (kthread+0xdc/0xf4) [ 2.852203] [<c035c140>] (kthread) from [<c0307d38>] (ret_from_fork+0x14/0x3c) [ 2.859765] Code: e34c2130 e30842c0 e34c4120 e58d4020 (e7923103) [ 2.866149] ---[ end trace e9862a2246fb6f34 ]---
[PYBOOT] [omap5uevm 02:06]: Timed out waiting for "<type 'str'>":
[PYBOOT] [omap5uevm 02:07]: got exception: timeout ~$off
[PYBOOT] [omap5uevm 02:09]: Done. Board omap5uevm-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.780055] usbhid: USB HID core driver [ 1.788529] NET: Registered protocol family 10 [ 1.793673] sit: IPv6 over IPv4 tunneling driver [ 1.798944] NET: Registered protocol family 17 [ 1.803604] can: controller area network core (rev 20120528 abi 9) [ 1.810111] NET: Registered protocol family 29 [ 1.814773] can: raw protocol (rev 20120528) [ 1.819231] can: broadcast manager protocol (rev 20120528 t) [ 1.825156] can: netlink gateway (rev 20130117) max_hops=1 [ 1.831185] Key type dns_resolver registered [ 1.835746] omap_vc_init_channel: No PMIC info for vdd_core [ 1.841573] omap_vp_init: No PMIC info for vdd_core [ 1.846677] omap_vc_init_channel: No PMIC info for vdd_mm [ 1.852328] omap_vp_init: No PMIC info for vdd_mm [ 1.857253] omap_vc_init_channel: No PMIC info for vdd_mpu [ 1.862991] omap_vp_init: No PMIC info for vdd_mpu [ 1.868508] Power Management for TI OMAP4+ devices. [ 1.873737] ThumbEE CPU extension supported. [ 1.878228] Registering SWP/SWPB emulation handler [ 1.885330] palmas 0-0048: Irq flag is 0x00000000 [ 1.902170] smsc95xx v1.0.4 [ 1.912016] palmas 0-0048: Muxing GPIO 2, PWM 0, LED 0 [ 1.922508] palmas-rtc 48070000.i2c:palmas@48:rtc: rtc core: registered 48070000.i2c:palmas as rtc0 [ 1.947337] mmc0: new high speed MMC card at address 0001 [ 1.953592] mmcblk0: mmc0:0001 SEM04G 3.69 GiB [ 1.953847] smsc95xx 1-3:1.0 eth0: register 'smsc95xx' at usb-4a064c00.ehci-3, smsc95xx USB 2.0 Ethernet, 6e:84:a9:d6:5f:6e [ 1.970139] mmcblk0boot0: mmc0:0001 SEM04G partition 1 2.00 MiB [ 1.976520] mmcblk0boot1: mmc0:0001 SEM04G partition 2 2.00 MiB [ 1.996512] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 2.020123] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 2.061105] cpufreq: cpufreq_online: CPU0: Running at unlisted freq: 1100000 KHz [ 2.[0 69 4 052]. 0U6nable to handle kernel NULL pointer dereference at virtual address 00000090 KHz
[PYBOOT] [omap5uevm 02:07]: Timed out waiting for "<type 'str'>":
[PYBOOT] [omap5uevm 02:08]: got exception: timeout ~$off
[PYBOOT] [omap5uevm 02:09]: Done. Board omap5uevm-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
[ 2.874005] [<c0301620>] (gic_handle_irq) from [<c030bcd4>] (__irq_svc+0x54/0x70) [ 2.881841] Exception stack(0xee501b78 to 0xee501bc0) [ 2.887126] 1b60: 00000001 ee072254 [ 2.895692] 1b80: 00000000 ee502000 ee482200 00000000 ee06c000 00000000 ee501bc8 ee4823a8 [ 2.904254] 1ba0: c09352da 00000000 ee072240 ee501bc8 c0357e7c c03373b0 60000113 ffffffff [ 2.912819] [<c030bcd4>] (__irq_svc) from [<c03373b0>] (do_exit+0x524/0x908) [ 2.920206] [<c03373b0>] (do_exit) from [<c030b5c4>] (die+0x328/0x394) [ 2.927046] [<c030b5c4>] (die) from [<c031a290>] (__do_kernel_fault.part.0+0x64/0x1e4) [ 2.935340] [<c031a290>] (__do_kernel_fault.part.0) from [<c0315580>] (do_page_fault+0x370/0x384) [ 2.944634] [<c0315580>] (do_page_fault) from [<c030125c>] (do_DataAbort+0x3c/0xb8) [ 2.952657] [<c030125c>] (do_DataAbort) from [<c030bc60>] (__dabt_svc+0x40/0x60) [ 2.960396] Exception stack(0xee501d50 to 0xee501d98) [ 2.965686] 1d40: 00000000 00000087 0000003a 00000000 [ 2.974250] 1d60: 20000013 00000000 00000001 c200af44 c200af44 00000000 00000000 00000000 [ 2.982818] 1d80: ee501de8 ee501da0 c0935694 c09352d8 60000093 ffffffff [ 2.989748] [<c030bc60>] (__dabt_svc) from [<c09352d8>] (__of_find_all_nodes.part.2+0x14/0x2c) [ 2.998774] [<c09352d8>] (__of_find_all_nodes.part.2) from [<c0935694>] (of_find_node_by_phandle+0x70/0x88) [ 3.008971] [<c0935694>] (of_find_node_by_phandle) from [<c09357f4>] (__of_parse_phandle_with_args+0x148/0x224) [ 3.019535] [<c09357f4>] (__of_parse_phandle_with_args) from [<c09358f8>] (of_parse_phandle+0x28/0x50) [ 3.029285] [<c09358f8>] (of_parse_phandle) from [<c09764c8>] (extcon_get_edev_by_phandle+0x2c/0xec) [ 3.038855] [<c09764c8>] (extcon_get_edev_by_phandle) from [<c0850ca0>] (dwc3_omap_probe+0x25c/0x3fc) [ 3.048515] [<c0850ca0>] (dwc3_omap_probe) from [<c07011a4>] (platform_drv_probe+0x50/0xb0) [ 3.057260] [<c07011a4>] (platform_drv_probe) from [<c06ff9ec>] (driver_probe_device+0x208/0x2b4) [ 3.066551] [<c06ff9ec>] (driver_probe_device) from [<c06fde0c>] (bus_for_each_drv+0x60/0x94) [ 3.075482] [<c06fde0c>] (bus_for_each_drv) from [<c06ff704>] (__device_attach+0xb0/0x114) [ 3.084136] [<c06ff704>] (__device_attach) from [<c06febe8>] (bus_probe_device+0x84/0x8c) [ 3.092700] [<c06febe8>] (bus_probe_device) from [<c06ff074>] (deferred_probe_work_func+0x68/0x94) [ 3.102087] [<c06ff074>] (deferred_probe_work_func) from [<c03489dc>] (process_one_work+0x1d4/0x3e0) [ 3.111653] [<c03489dc>] (process_one_work) from [<c0348c34>] (worker_thread+0x4c/0x55c) [ 3.120124] [<c0348c34>] (worker_thread) from [<c034db14>] (kthread+0xd4/0xec) [ 3.127687] [<c034db14>] (kthread) from [<c0307998>] (ret_from_fork+0x14/0x3c) [ 3.135250] Code: e7973106 e3530000 128d2004 15832004 (e7875106) [ 3.141633] ---[ end trace cb88537fdc8fa203 ]--- [ 3.146473] Kernel panic - not syncing: Fatal exception in interrupt [ 3.153120] ---[ end Kernel panic - not syncing: Fatal exception in interrupt
[PYBOOT] [omap5uevm 01:07]: got exception: panic ~$off
[PYBOOT] [omap5uevm 01:08]: Done. Board seaboard-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.657173] vdd_ldo7,avdd_hdmi,vdd_fuse: supplied by vdd_sm2,vin_ldo* [ 1.667693] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 1.674173] tegra-ehci c5000000.usb: EHCI Host Controller [ 1.679594] tegra-ehci c5000000.usb: new USB bus registered, assigned bus number 3 [ 1.688065] tegra-ehci c5000000.usb: irq 287, io mem 0xc5000000 [ 1.699931] mmc2: switch to bus width 8 failed [ 1.704483] tegra-ehci c5000000.usb: USB 2.0 started, EHCI 1.00 [ 1.711120] mmc2: switch to bus width 4 failed [ 1.715630] mmc2: new high speed MMC card at address 0001 [ 1.715971] hub 3-0:1.0: USB hub found [ 1.716022] hub 3-0:1.0: 1 port detected [ 1.730877] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.737515] [drm] No driver support for vblank timestamp query. [ 1.743560] mmcblk2: mmc2:0001 MMC08G 7.46 GiB [ 1.748649] mmcblk2boot0: mmc2:0001 MMC08G partition 1 512 KiB [ 1.754770] mmcblk2boot1: mmc2:0001 MMC08G partition 2 512 KiB [ 1.761987] mmcblk2: p3 [ 1.773394] mmc0: queuing unknown CIS tuple 0x80 (50 bytes) [ 1.787235] mmc0: queuing unknown CIS tuple 0x80 (7 bytes) [ 1.790074] mmc0: queuing unknown CIS tuple 0x80 (7 bytes) [ 1.797379] mmc0: queuing unknown CIS tuple 0x80 (19 bytes) [ 1.816604] mmc0: queuing unknown CIS tuple 0x02 (1 bytes) [ 1.820942] mmc0: new SDIO card at address 0001 [ 1.845317] Console: switching to colour frame buffer device 170x48 [ 1.894965] drm drm: fb0: frame buffer device [ 1.913619] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 1.920436] input: gpio-keys as /devices/soc0/gpio-keys/input/input2 [ 1.949454] tps6586x-rtc tps6586x-rtc: setting system clock to 2009-01-01 00:00:00 UTC (1230768000) [ 1.974687] vdd_1v5: disabling [ 1.977741] vdd_1v2: disabling [ 2.558191] asix 2-1:1.0 eth0: register 'asix' at usb-c5008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, c0:c1:c0:13:08:60 [ 2.569640] Waiting for root device /dev/mmcblk0p3... [ 58.608731] random: nonblocking pool is initialized
[PYBOOT] [seaboard 01:53]: Timed out waiting for "<type 'str'>":
[PYBOOT] [seaboard 01:54]: got exception: timeout ~$off
[PYBOOT] [seaboard 01:55]: Done. Board seaboard-arm-tegra_defconfig failure log: -------------------------------------------------
[ 1.581976] Bluetooth: RFCOMM ver 1.11 [ 1.582017] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 1.582045] Bluetooth: BNEP socket layer initialized [ 1.582058] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 1.582082] Bluetooth: HIDP socket layer initialized [ 1.582610] Key type dns_resolver registered [ 1.583673] Registering SWP/SWPB emulation handler [ 1.609289] tegra-dc 54200000.dc: failed to probe RGB output: -517 [ 1.609834] VDDIO_HDMI: supplied by vdd_5v0 [ 1.610096] vdd_sys: supplied by vdd_5v0 [ 1.610187] vdd_sm2,vin_ldo*: supplied by vdd_sys [ 1.610456] vdd_ldo8,avdd_hdmi_pll: supplied by vdd_sm2,vin_ldo* [ 1.611006] vdd_ldo7,avdd_hdmi,vdd_fuse: supplied by vdd_sm2,vin_ldo* [ 1.614954] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 1.614985] tegra-ehci c5000000.usb: EHCI Host Controller [ 1.615044] tegra-ehci c5000000.usb: new USB bus registered, assigned bus number 3 [ 1.615548] tegra-ehci c5000000.usb: irq 287, io mem 0xc5000000 [ 1.638398] tegra-ehci c5000000.usb: USB 2.0 started, EHCI 1.00 [ 1.641169] hub 3-0:1.0: USB hub found [ 1.641230] hub 3-0:1.0: 1 port detected [ 1.654335] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.654338] [drm] No driver support for vblank timestamp query. [ 1.773066] Console: switching to colour frame buffer device 170x48 [ 1.792047] drm drm: fb0: frame buffer device [ 1.818383] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 1.825393] input: gpio-keys as /devices/soc0/gpio-keys/input/input4 [ 1.832921] tps6586x-rtc tps6586x-rtc: setting system clock to 2009-01-01 00:00:00 UTC (1230768000) [ 1.851438] vdd_1v5: disabling [ 1.854490] vdd_1v2: disabling [ 1.857652] ALSA device list: [ 1.860635] #0: NVIDIA Tegra Seaboard [ 2.298794] asix 2-1:1.0 eth0: register 'asix' at usb-c5008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, c0:c1:c0:13:08:60 [ 2.310005] Waiting for root device /dev/mmcblk0p3...
[PYBOOT] [seaboard 01:45]: Timed out waiting for "<type 'str'>":
[PYBOOT] [seaboard 01:47]: got exception: timeout ~$off
[PYBOOT] [seaboard 01:48]: Done. Board snow-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
[....] Waiting for /dev to be fully populated...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Activating swap...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [ 3.193447] EXT4-fs (mmcblk0p3): warning: mounting fs with errors, running e2fsck is recommended [ 3.201798] EXT4-fs (mmcblk0p3): re-mounted. Opts: (null) [....] Cleaning up temporary files... /tmp[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] Activating lvm and md swap...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Checking file systems...fsck from util-linux 2.20.1 [?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Mounting local filesystems...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Activating swapfile swap...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Cleaning up temporary files...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] Setting kernel variables ...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [ 4.248749] random: dd urandom read with 56 bits of entropy available [....] Configuring network interfaces...Internet Systems Consortium DHCP Client 4.2.2 Copyright 2004-2011 Internet Systems Consortium. All rights reserved. For info, please visit https://www.isc.org/software/dhcp/
Cannot find device "eth0" Bind socket to interface: No such device Failed to bring up eth0. [?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Cleaning up temporary files...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. INIT: Entering runlevel: 2 [[36minfo[39;49m] Using makefile-style concurrent boot in runlevel 2. [....] Starting enhanced syslogd: rsyslogd[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] Starting web server: apache2apache2: Could not reliably determine the server's fully qualified domain name, using 127.0.0.1 for ServerName [?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] Starting periodic command scheduler: cron[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] Loading cpufreq kernel modules...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone (none). [....] Starting system message bus: dbus[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] CPUFreq Utilities: Setting ondemand CPUFreq governor...CPU0...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Starting OpenBSD Secure Shell server: sshd[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c.
[PYBOOT] [snow 03:12]: Timed out waiting for "<type 'str'>":
[PYBOOT] [snow 03:13]: got exception: timeout ~$off
[PYBOOT] [snow 03:14]: Done. Board snowball-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
[ 1.903137] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.910675] ledtrig-cpu: registered to indicate activity on CPUs [ 1.916900] usbcore: registered new interface driver usbhid [ 1.922485] usbhid: USB HID core driver [ 1.929809] NET: Registered protocol family 10 [ 1.985137] sit: IPv6 over IPv4 tunneling driver [ 1.990325] NET: Registered protocol family 17 [ 1.994781] can: controller area network core (rev 20120528 abi 9) [ 2.001007] NET: Registered protocol family 29 [ 2.005462] can: raw protocol (rev 20120528) [ 2.009735] can: broadcast manager protocol (rev 20120528 t) [ 2.015411] can: netlink gateway (rev 20130117) max_hops=1 [ 2.021331] Key type dns_resolver registered [ 2.025787] ThumbEE CPU extension supported. [ 2.080108] input: gpio_keys as /devices/soc0/gpio_keys/input/input0 [ 2.094787] rtc-pl031 80154000.rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 2.103912] thermal cooling_device0: thermal-cpufreq-0 bind to 0: 0-succeed [ 2.110900] thermal cooling_device0: thermal-cpufreq-0 bind to 1: 0-succeed [ 2.117858] thermal cooling_device0: thermal-cpufreq-0 bind to 2: 0-succeed [ 2.124847] db8500-cpufreq-cooling soc:cpufreq-cooling: Cooling device registered: thermal-cpufreq-0 [ 2.136596] db8500-esram12: disabling [ 2.184387] db8500-esram34: disabling [ 2.205108] V-CSI/DSI: disabling [ 2.214355] mmci-reg: disabling [ 2.217956] uart-pl011 80007000.uart: DMA channel TX dma0chan20 [ 2.223937] uart-pl011 80007000.uart: DMA channel RX dma0chan21 [ 2.244110] Waiting for root device /dev/mmcblk0p4... [ 3.038940] mmc3: new high speed MMC card at address 0001 [ 3.054748] mmcblk3: mmc3:0001 3.53 GiB [ 3.058898] mmcblk3boot0: mmc3:0001 partition 1 2.00 MiB [ 3.069427] mmcblk3boot1: mmc3:0001 partition 2 2.00 MiB [ 3.083953] mmcblk3rpmb: mmc3:0001 partition 3 128 KiB [ 3.095764] mmcblk3: p1 p2 p3 p4
[PYBOOT] [snowball 01:56]: Timed out waiting for "<type 'str'>":
[PYBOOT] [snowball 01:57]: got exception: timeout ~$off
[PYBOOT] [snowball 01:58]: Done. Board snowball-arm-u8500_defconfig failure log: -------------------------------------------------
[ 2.614105] snd-soc-mop500 snd-soc-mop500.0: ab8500-codec-dai.0 <-> ux500-msp-i2s.1 mapping ok [ 2.624023] ux500-msp-i2s ux500-msp-i2s.3: Failed to get DMA channel capabilities, falling back to period counting: -6 [ 2.634735] snd-soc-mop500 snd-soc-mop500.0: ab8500-codec-dai.1 <-> ux500-msp-i2s.3 mapping ok [ 2.658325] NET: Registered protocol family 10 [ 2.663787] sit: IPv6 over IPv4 tunneling driver [ 2.669342] NET: Registered protocol family 17 [ 2.673858] NET: Registered protocol family 35 [ 2.678375] NET: Registered protocol family 37 [ 2.683013] Registering SWP/SWPB emulation handler [ 2.699401] coresight-etm3x 801ae000.ptm: PTM 1.0 initialized [ 2.705993] coresight-etm3x 801af000.ptm: PTM 1.0 initialized [ 2.712707] input: gpio_keys as /devices/soc0/gpio_keys/input/input1 [ 2.719757] ab8500-rtc ab8500-rtc.0: setting system clock to 2000-04-17 01:30:01 UTC (955935001) [ 2.729125] thermal cooling_device0: thermal-cpufreq-0 bind to 0: 0-succeed [ 2.736114] thermal cooling_device0: thermal-cpufreq-0 bind to 1: 0-succeed [ 2.743103] thermal cooling_device0: thermal-cpufreq-0 bind to 2: 0-succeed [ 2.750091] db8500-cpufreq-cooling soc:cpufreq-cooling: Cooling device registered: thermal-cpufreq-0 [ 2.763671] db8500-esram12: disabling [ 2.767425] db8500-esram34: disabling [ 2.771331] V-CSI/DSI: disabling [ 2.774597] mmci-reg: disabling [ 2.777923] ALSA device list: [ 2.780914] #0: MOP500-card [ 2.784240] uart-pl011 80007000.uart: DMA channel TX dma0chan24 [ 2.790191] uart-pl011 80007000.uart: DMA channel RX dma0chan25 [ 2.796417] Waiting for root device /dev/mmcblk0p4... [ 65.390716] random: nonblocking pool is initialized Connected. cu: Got hangup signal cu: waitpid: No child processes Connected.
Disconnected.
[PYBOOT] [snowball 01:54]: Timed out waiting for "<type 'str'>":
[PYBOOT] [snowball 01:55]: got exception: timeout ~$off
[PYBOOT] [snowball 01:56]: Done. Board wandboard-arm-imx_v6_v7_defconfig failure log: -------------------------------------------------
[ 20.012272] mmcblk0: error -110 sending status command, aborting INIT: cannot execute "/sbin/getty" [ 20.023629] mmcblk0: error -110 sending status command, retrying INIT: cannot execute "/sbin/gett[ 20.032279] mmcblk0: error -110 sending status command, retrying y" [ 20.041199] mmcblk0: error -110 sending status command, aborting [ 20.052310] mmcblk0: error -110 sending status command, retrying [ 20.060765] mmcblk0: error -110 sending status command, retrying [ 20.069241] mmcblk0: error -110 sending status command, aborting [ 20.080276] mmcblk0: error -110 sending status command, retrying [ 20.088729] mmcblk0: error -110 sending status command, retrying [ 20.097195] mmcblk0: error -110 sending status command, aborting [ 20.108185] mmcblk0: error -110 sending status command, retrying [ 20.116619] mmcblk0: error -110 sending status command, retrying [ 20.125051] mmcblk0: error -110 sending status command, aborting INIT: cannot execute "/sbin/getty" INIT: cannot execute "/sbin/getty" INIT: cannot execute "/sbin/getty"INIT: INIT: cannot execute "/sbin/getty"Id "1" respawning too fast: disabled for 5 minutes
INIT: Id "4" respawning too fast: disabled for 5 minutes INIT: Id "2" respawning too fast: disabled for 5 minutes [ 20.251611] mmcblk0: error -110 sending status command, retrying [ 20.260086] mmcblk0: error -110 sending status command, retrying [ 20.268546] mmcblk0: error -110 sending status command, aborting INIT: cannot execute "/sbin/getty" [ 20.303262] mmcblk0: error -110 sending status command, retrying [ 20.311722] mmcblk0: error -110 sending status command, retrying [ 20.320182] mmcblk0: error -110 sending status command, aborting INIT: cannot execute "/sbin/getty" INIT: Id "6" respawning too fast: disabled for 5 minutes INIT: no more processes left in this runlevel [ 48.195137] random: nonblocking pool is initialized
[PYBOOT] [wandboard 02:55]: Timed out waiting for "<type 'str'>":
[PYBOOT] [wandboard 02:56]: got exception: timeout ~$off
[PYBOOT] [wandboard 02:57]: Done.