mainline boot: 53 passed 29 failed (mainline/v4.6-rc5)

Full logs are available at http://arm-soc.lixom.net/bootlogs/mainline/v4.6-rc5/

Failed boards:

arndale arm-multi_v7_nosmp_defconfig : FAILED 22:52.78 bbb arm-omap2plus_defconfig : FAILED 1:54.20 bbb arm-multi_v7_defconfig : FAILED 1:53.39 bbb arm-multi_v7_nosmp_defconfig : FAILED 2:07.42 beagleboard-x15 arm-omap2plus_defconfig : FAILED 1:43.14 beagleboard-x15 arm-multi_v7_defconfig : FAILED 1:46.53 beagleboard-x15 arm-multi_lpae_defconfig : FAILED 1:45.41 beagleboard-x15 arm-multi_v7_nosmp_defconfig : FAILED 1:52.78 beaver arm-tegra_defconfig : FAILED 1:44.74 beaver arm-multi_v7_defconfig : FAILED 1:53.53 beaver arm-multi_v7_nosmp_defconfig : FAILED 1:55.59 chitra powerpc-ppc64_defconfig : FAILED 1:48.01 colombus arm-multi_v7_nosmp_defconfig : FAILED 3:20.64 cosmic arm-imx_v6_v7_defconfig : FAILED 2:02.67 cosmic arm-multi_v7_defconfig : FAILED 2:10.70 cosmic arm-multi_v7_nosmp_defconfig : FAILED 2:11.85 dalmore arm-tegra_defconfig : FAILED 1:47.58 dalmore arm-multi_v7_defconfig : FAILED 2:01.91 dalmore arm-multi_lpae_defconfig : FAILED 1:53.66 dalmore arm-multi_v7_nosmp_defconfig : FAILED 1:53.77 minnowmax minnowmax_defconfig : NO BUILD odroidu3 arm-exynos_defconfig : FAILED 1:46.91 seaboard arm-tegra_defconfig : FAILED 1:47.85 seaboard arm-multi_v7_defconfig : FAILED 1:59.41 seaboard arm-multi_v7_nosmp_defconfig : FAILED 1:58.92 snow arm-multi_v7_nosmp_defconfig : FAILED 3:14.17 snowball arm-u8500_defconfig : FAILED 1:56.67 snowball arm-multi_v7_defconfig : FAILED 2:28.72 snowball arm-multi_v7_nosmp_defconfig : FAILED 1:59.29 wandboard arm-imx_v6_v7_defconfig : FAILED 2:58.03

Successful boards:

apc arm-vt8500_v6_v7_defconfig : passed 1:17.46 arndale arm-exynos_defconfig : passed 1:30.69 arndale arm-multi_v7_defconfig : passed 1:20.88 arndale arm-multi_lpae_defconfig : passed 1:28.23 capri arm-bcm_defconfig : passed 0:47.57 capri arm-multi_v7_defconfig : passed 1:11.35 capri arm-multi_v7_nosmp_defconfig : warnings 0:47.92 chitra powerpc-pasemi_defconfig : passed 2:13.32 colibri-vf61 arm-imx_v6_v7_defconfig : passed 1:38.22 colibri-vf61 arm-multi_v7_defconfig : passed 1:30.30 colibri-vf61 arm-multi_v7_nosmp_defconfig : passed 1:32.27 colombus arm-sunxi_defconfig : passed 2:27.82 colombus arm-multi_v7_defconfig : passed 2:45.81 colombus arm-multi_lpae_defconfig : passed 2:36.30 cubie arm-sunxi_defconfig : passed 0:51.01 cubie arm-multi_v7_defconfig : passed 0:50.16 cubie arm-multi_v7_nosmp_defconfig : passed 0:52.79 cubie2 arm-sunxi_defconfig : passed 0:52.53 cubie2 arm-multi_v7_defconfig : passed 1:01.40 cubie2 arm-multi_lpae_defconfig : passed 0:52.58 cubie2 arm-multi_v7_nosmp_defconfig : warnings 0:55.94 cubox arm-multi_v7_defconfig : passed 1:17.94 cubox arm-mvebu_v7_defconfig : passed 1:25.98 cubox arm-multi_v7_nosmp_defconfig : passed 1:20.03 hummingboard arm-imx_v6_v7_defconfig : passed 1:26.57 hummingboard arm-multi_v7_defconfig : passed 1:20.86 hummingboard arm-multi_v7_nosmp_defconfig : warnings 1:16.44 jetsontk1 arm-tegra_defconfig : passed 1:34.09 jetsontk1 arm-multi_v7_defconfig : passed 1:37.54 jetsontk1 arm-multi_lpae_defconfig : passed 1:43.03 jetsontk1 arm-multi_v7_nosmp_defconfig : warnings 1:35.53 pandaes arm-omap2plus_defconfig : warnings 1:37.04 pandaes arm-multi_v7_defconfig : passed 1:41.00 pandaes arm-multi_v7_nosmp_defconfig : warnings 2:00.84 pi arm-exynos_defconfig : passed 2:09.67 pi arm-multi_v7_defconfig : passed 2:18.99 pi arm-multi_lpae_defconfig : passed 2:26.75 pi arm-multi_v7_nosmp_defconfig : warnings 2:10.31 pit arm-exynos_defconfig : passed 2:13.89 pit arm-multi_v7_defconfig : passed 2:17.53 pit arm-multi_lpae_defconfig : passed 2:18.74 pit arm-multi_v7_nosmp_defconfig : warnings 2:14.78 seattle arm64-defconfig : warnings 2:35.78 snow arm-exynos_defconfig : passed 2:39.25 snow arm-multi_v7_defconfig : passed 2:10.10 snow arm-multi_lpae_defconfig : passed 1:59.61 socfpga arm-socfpga_defconfig : passed 1:20.86 socfpga arm-multi_v7_defconfig : passed 1:18.48 socfpga arm-multi_v7_nosmp_defconfig : warnings 1:22.21 trimslice arm-multi_v7_defconfig : passed 1:47.65 trimslice arm-multi_v7_nosmp_defconfig : warnings 1:40.52 wandboard arm-multi_v7_defconfig : passed 1:09.41 wandboard arm-multi_v7_nosmp_defconfig : warnings 1:04.61

Offline boards:

omap5uevm arm-omap2plus_defconfig : OFFLINE 1:17.38 omap5uevm arm-multi_v7_defconfig : OFFLINE 1:18.45 omap5uevm arm-multi_lpae_defconfig : OFFLINE 1:23.44 omap5uevm arm-multi_v7_nosmp_defconfig : OFFLINE 1:28.09 parallella arm-multi_v7_defconfig : OFFLINE 2:28.78 parallella arm-multi_v7_nosmp_defconfig : OFFLINE 2:18.75 rk3288evb arm-multi_v7_defconfig : OFFLINE 0:56.30 rk3288evb arm-multi_lpae_defconfig : OFFLINE 0:51.06 rk3288evb arm-multi_v7_nosmp_defconfig : OFFLINE 0:48.89 sama5 arm-sama5_defconfig : OFFLINE 2:23.01 sama5d3-xplained arm-sama5_defconfig : OFFLINE 2:25.66 trimslice arm-tegra_defconfig : OFFLINE 3:31.02

Board legend is available at http://arm-soc.lixom.net/boards.html

Board arndale-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------

[ 1.591705] usb_phy_generic.0.auto supply vcc not found, using dummy regulator [ 1.598330] usb_phy_generic.1.auto supply vcc not found, using dummy regulator [ 1.605456] exynos-dwc3 usb@12000000: no suspend clk specified [ 1.611240] usb@12000000 supply vdd33 not found, using dummy regulator [ 1.617760] usb@12000000 supply vdd10 not found, using dummy regulator [ 1.626158] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.631225] ehci-pci: EHCI PCI platform driver [ 1.635668] ehci-platform: EHCI generic platform driver [ 1.640994] ehci-omap: OMAP-EHCI Host Controller driver [ 1.646143] ehci-orion: EHCI orion driver [ 1.650135] SPEAr-ehci: EHCI SPEAr driver [ 1.654131] ehci-st: EHCI STMicroelectronics driver [ 1.658995] ehci-exynos: EHCI EXYNOS driver [ 1.663242] ehci-atmel: EHCI Atmel driver [ 1.667150] tegra-ehci: Tegra EHCI driver [ 1.671159] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.677224] ohci-pci: OHCI PCI platform driver [ 1.681674] ohci-platform: OHCI generic platform driver [ 1.686959] ohci-omap3: OHCI OMAP3 driver [ 1.690932] SPEAr-ohci: OHCI SPEAr driver [ 1.694928] ohci-st: OHCI STMicroelectronics driver [ 1.699787] ohci-atmel: OHCI Atmel driver [ 1.704073] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller [ 1.709176] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 1 [ 1.716998] xhci-hcd xhci-hcd.2.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x00010010 [ 1.725497] xhci-hcd xhci-hcd.2.auto: irq 140, io mem 0x12000000 [ 1.731905] hub 1-0:1.0: USB hub found [ 1.735219] hub 1-0:1.0: 1 port detected [ 1.739307] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller [ 1.744583] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 2 [ 1.752251] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.760675] hub 2-0:1.0: USB hub found [ 1.764033] hub 2-0:1.0: 1 port detected [ 1.768203] usbcore: registered new interface driver usb-storage [ 1.774958] mousedev: PS/2 mouse device common for all mice [ 1.781790] i2c [PYBOOT] [arndale 22:45]: got exception: maximum recursion depth exceeded ~$off

[PYBOOT] [arndale 22:47]: Done. Board bbb-arm-multi_v7_defconfig failure log: -------------------------------------------------

[ 1.630468] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.640716] ledtrig-cpu: registered to indicate activity on CPUs [ 1.647801] usbcore: registered new interface driver usbhid [ 1.653725] usbhid: USB HID core driver [ 1.665741] NET: Registered protocol family 10 [ 1.672277] sit: IPv6 over IPv4 tunneling driver [ 1.678393] NET: Registered protocol family 17 [ 1.683163] can: controller area network core (rev 20120528 abi 9) [ 1.689809] NET: Registered protocol family 29 [ 1.694527] can: raw protocol (rev 20120528) [ 1.699048] can: broadcast manager protocol (rev 20120528 t) [ 1.705040] can: netlink gateway (rev 20130117) max_hops=1 [ 1.711792] Key type dns_resolver registered [ 1.716688] omap_voltage_late_init: Voltage driver support not added [ 1.724974] ThumbEE CPU extension supported. [ 1.729604] Registering SWP/SWPB emulation handler [ 1.772077] tps65217 0-0024: TPS65217 ID 0xe version 1.2 [ 1.778608] at24 0-0050: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.786375] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 1.795064] at24 2-0054: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.802980] at24 2-0055: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.810807] at24 2-0056: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.818626] at24 2-0057: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.825976] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz [ 1.834689] cpufreq: cpufreq_online: CPU0: Running at unlisted freq: 550000 KHz [ 1.842619] cpufreq: cpufreq_online: CPU0: Unlisted initial frequency changed to: 600000 KHz [ 1.852347] mmc1: new high speed MMC card at address 0001 [ 1.859575] hctosys: unable to open rtc device (rtc0) [ 1.872640] mmcblk1: mmc1:0001 MMC02G 1.79 GiB [ 1.878696] mmcblk1boot0: mmc1:0001 MMC02G partition 1 1.00 MiB [ 1.885683] mmcblk1boot1: mmc1:0001 MMC02G partition 2 1.00 MiB [ 1.894539] mmcblk1: p1 p2 [ 1.900249] Waiting for root device /dev/mmcblk0p2...

[PYBOOT] [bbb 01:50]: Timed out waiting for "<type 'str'>":

[PYBOOT] [bbb 01:51]: got exception: timeout ~$off

[PYBOOT] [bbb 01:52]: Done. Board bbb-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------

[ 1.314751] sdhci: Secure Digital Host Controller Interface driver [ 1.321279] sdhci: Copyright(c) Pierre Ossman [ 1.327078] omap_hsmmc 48060000.mmc: Got CD GPIO [ 1.390101] Synopsys Designware Multimedia Card Interface Driver [ 1.397500] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.406687] ledtrig-cpu: registered to indicate activity on CPUs [ 1.413424] usbcore: registered new interface driver usbhid [ 1.419307] usbhid: USB HID core driver [ 1.428854] NET: Registered protocol family 10 [ 1.435333] sit: IPv6 over IPv4 tunneling driver [ 1.441198] NET: Registered protocol family 17 [ 1.445940] can: controller area network core (rev 20120528 abi 9) [ 1.452538] NET: Registered protocol family 29 [ 1.457237] can: raw protocol (rev 20120528) [ 1.461752] can: broadcast manager protocol (rev 20120528 t) [ 1.467729] can: netlink gateway (rev 20130117) max_hops=1 [ 1.474245] Key type dns_resolver registered [ 1.479110] omap_voltage_late_init: Voltage driver support not added [ 1.486903] ThumbEE CPU extension supported. [ 1.499521] at24 0-0050: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.507083] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 1.515150] at24 2-0054: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.522894] at24 2-0055: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.530587] at24 2-0056: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.538272] at24 2-0057: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.545557] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz [ 1.553243] hctosys: unable to open rtc device (rtc0) [ 1.564027] Waiting for root device /dev/mmcblk0p2... [ 1.599380] mmc1: new high speed MMC card at address 0001 [ 1.605848] mmcblk1: mmc1:0001 MMC02G 1.79 GiB [ 1.610925] mmcblk1boot0: mmc1:0001 MMC02G partition 1 1.00 MiB [ 1.617409] mmcblk1boot1: mmc1:0001 MMC02G partition 2 1.00 MiB [ 1.625846] mmcblk1: p1 p2

[PYBOOT] [bbb 02:04]: Timed out waiting for "<type 'str'>":

[PYBOOT] [bbb 02:05]: got exception: timeout ~$off

[PYBOOT] [bbb 02:06]: Done. Board bbb-arm-omap2plus_defconfig failure log: -------------------------------------------------

[ 2.058999] omap_hsmmc 481d8000.mmc: lookup for GPIO cd failed [ 2.065115] omap_hsmmc 481d8000.mmc: GPIO lookup for consumer wp [ 2.071440] omap_hsmmc 481d8000.mmc: using device tree for GPIO lookup [ 2.078313] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@481d8000[0]' [ 2.087906] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@481d8000[0]' [ 2.097401] omap_hsmmc 481d8000.mmc: using lookup tables for GPIO lookup [ 2.104418] omap_hsmmc 481d8000.mmc: lookup for GPIO wp failed [ 2.147782] ledtrig-cpu: registered to indicate activity on CPUs [ 2.156511] oprofile: using arm/armv7 [ 2.161658] Initializing XFRM netlink socket [ 2.166756] NET: Registered protocol family 10 [ 2.177672] sit: IPv6 over IPv4 tunneling driver [ 2.186530] NET: Registered protocol family 17 [ 2.191470] NET: Registered protocol family 15 [ 2.196718] Key type dns_resolver registered [ 2.201583] omap_voltage_late_init: Voltage driver support not added [ 2.208319] sr_dev_init: No voltage domain specified for smartreflex0. Cannot initialize [ 2.216781] sr_dev_init: No voltage domain specified for smartreflex1. Cannot initialize [ 2.227219] ThumbEE CPU extension supported. [ 2.231758] Registering SWP/SWPB emulation handler [ 2.236788] SmartReflex Class3 initialized [ 2.306746] tps65217 0-0024: TPS65217 ID 0xe version 1.2 [ 2.314048] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 2.324680] mmc1: new high speed MMC card at address 0001 [ 2.336912] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz [ 2.345263] mmcblk1: mmc1:0001 MMC02G 1.79 GiB [ 2.353105] hctosys: unable to open rtc device (rtc0) [ 2.358559] sr_init: No PMIC hook to init smartreflex [ 2.364228] sr_init: platform driver register failed for SR [ 2.405625] mmcblk1boot0: mmc1:0001 MMC02G partition 1 1.00 MiB [ 2.413638] mmcblk1boot1: mmc1:0001 MMC02G partition 2 1.00 MiB [ 2.428178] mmcblk1: p1 p2 [ 2.445594] Waiting for root device /dev/mmcblk0p2...

[PYBOOT] [bbb 01:51]: Timed out waiting for "<type 'str'>":

[PYBOOT] [bbb 01:52]: got exception: timeout ~$off

[PYBOOT] [bbb 01:53]: Done. Board beagleboard-x15-arm-multi_lpae_defconfig failure log: -------------------------------------------------

[ 1.577775] NET: Registered protocol family 10 [ 1.583049] sit: IPv6 over IPv4 tunneling driver [ 1.588363] NET: Registered protocol family 17 [ 1.593031] can: controller area network core (rev 20120528 abi 9) [ 1.599551] NET: Registered protocol family 29 [ 1.604215] can: raw protocol (rev 20120528) [ 1.608688] can: broadcast manager protocol (rev 20120528 t) [ 1.614616] can: netlink gateway (rev 20130117) max_hops=1 [ 1.620646] Key type dns_resolver registered [ 1.625205] omap_voltage_late_init: Voltage driver support not added [ 1.632421] Power Management for TI OMAP4+ devices. [ 1.637729] ThumbEE CPU extension supported. [ 1.642222] Registering SWP/SWPB emulation handler [ 1.649050] palmas 0-0058: Irq flag is 0x00000008 [ 1.672216] palmas 0-0058: Muxing GPIO 2f, PWM 0, LED 0 [ 1.703180] palmas-rtc 48070000.i2c:tps659038@58:tps659038_rtc: rtc core: registered 48070000.i2c:tps659 as rtc1 [ 1.717905] at24 0-0050: 4096 byte 24c32 EEPROM, writable, 1 bytes/write [ 1.724973] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 1.750550] rtc-ds1307 2-006f: SET TIME! [ 1.756313] rtc-ds1307 2-006f: rtc core: registered mcp7941x as rtc0 [ 1.763052] rtc-ds1307 2-006f: 64 bytes nvram [ 1.767662] omap_i2c 48060000.i2c: bus 2 rev0.12 at 400 kHz [ 1.776747] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 1.811116] vdd_3v3: supplied by regen1 [ 1.850294] rtc-ds1307 2-006f: setting system clock to 2001-01-01 00:00:00 UTC (978307200) [ 1.867766] aic_dvdd_fixed: disabling [ 1.872503] ldousb: disabling [ 1.876607] Waiting for root device /dev/mmcblk0p1... [ 1.892107] mmc1: new high speed MMC card at address 0001 [ 1.898077] mmcblk1: mmc1:0001 S10004 3.56 GiB [ 1.902992] mmcblk1boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 1.909339] mmcblk1boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 1.916204] mmcblk1: p1

[PYBOOT] [beagleboard-x15 01:42]: Timed out waiting for "<type 'str'>":

[PYBOOT] [beagleboard-x15 01:43]: got exception: timeout ~$off

[PYBOOT] [beagleboard-x15 01:44]: Done. Board beagleboard-x15-arm-multi_v7_defconfig failure log: -------------------------------------------------

[ 1.577789] NET: Registered protocol family 10 [ 1.583061] sit: IPv6 over IPv4 tunneling driver [ 1.588365] NET: Registered protocol family 17 [ 1.593035] can: controller area network core (rev 20120528 abi 9) [ 1.599545] NET: Registered protocol family 29 [ 1.604204] can: raw protocol (rev 20120528) [ 1.608678] can: broadcast manager protocol (rev 20120528 t) [ 1.614618] can: netlink gateway (rev 20130117) max_hops=1 [ 1.620655] Key type dns_resolver registered [ 1.625222] omap_voltage_late_init: Voltage driver support not added [ 1.632435] Power Management for TI OMAP4+ devices. [ 1.637744] ThumbEE CPU extension supported. [ 1.642240] Registering SWP/SWPB emulation handler [ 1.649058] palmas 0-0058: Irq flag is 0x00000008 [ 1.672335] palmas 0-0058: Muxing GPIO 2f, PWM 0, LED 0 [ 1.703346] palmas-rtc 48070000.i2c:tps659038@58:tps659038_rtc: rtc core: registered 48070000.i2c:tps659 as rtc1 [ 1.718048] at24 0-0050: 4096 byte 24c32 EEPROM, writable, 1 bytes/write [ 1.725129] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 1.750594] rtc-ds1307 2-006f: SET TIME! [ 1.756358] rtc-ds1307 2-006f: rtc core: registered mcp7941x as rtc0 [ 1.763103] rtc-ds1307 2-006f: 64 bytes nvram [ 1.767717] omap_i2c 48060000.i2c: bus 2 rev0.12 at 400 kHz [ 1.776793] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 1.811175] vdd_3v3: supplied by regen1 [ 1.848520] rtc-ds1307 2-006f: setting system clock to 2001-01-01 00:00:00 UTC (978307200) [ 1.865993] aic_dvdd_fixed: disabling [ 1.870744] ldousb: disabling [ 1.874852] Waiting for root device /dev/mmcblk0p1... [ 1.892145] mmc1: new high speed MMC card at address 0001 [ 1.898116] mmcblk1: mmc1:0001 S10004 3.56 GiB [ 1.903030] mmcblk1boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 1.909378] mmcblk1boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 1.916240] mmcblk1: p1

[PYBOOT] [beagleboard-x15 01:43]: Timed out waiting for "<type 'str'>":

[PYBOOT] [beagleboard-x15 01:44]: got exception: timeout ~$off

[PYBOOT] [beagleboard-x15 01:46]: Done. Board beagleboard-x15-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------

[ 1.452867] NET: Registered protocol family 10 [ 1.458136] sit: IPv6 over IPv4 tunneling driver [ 1.463321] NET: Registered protocol family 17 [ 1.467982] can: controller area network core (rev 20120528 abi 9) [ 1.474478] NET: Registered protocol family 29 [ 1.479128] can: raw protocol (rev 20120528) [ 1.483598] can: broadcast manager protocol (rev 20120528 t) [ 1.489523] can: netlink gateway (rev 20130117) max_hops=1 [ 1.495483] Key type dns_resolver registered [ 1.500030] omap_voltage_late_init: Voltage driver support not added [ 1.506983] Power Management for TI OMAP4+ devices. [ 1.512241] ThumbEE CPU extension supported. [ 1.516823] ata1: SATA link down (SStatus 0 SControl 300) [ 1.523761] palmas 0-0058: Irq flag is 0x00000008 [ 1.549268] palmas 0-0058: Muxing GPIO 2f, PWM 0, LED 0 [ 1.576955] palmas-rtc 48070000.i2c:tps659038@58:tps659038_rtc: rtc core: registered 48070000.i2c:tps659 as rtc1 [ 1.590463] at24 0-0050: 4096 byte 24c32 EEPROM, writable, 1 bytes/write [ 1.597510] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 1.622824] rtc-ds1307 2-006f: SET TIME! [ 1.628440] rtc-ds1307 2-006f: rtc core: registered mcp7941x as rtc0 [ 1.635144] rtc-ds1307 2-006f: 64 bytes nvram [ 1.639733] omap_i2c 48060000.i2c: bus 2 rev0.12 at 400 kHz [ 1.647512] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 1.683049] vdd_3v3: supplied by regen1 [ 1.714519] rtc-ds1307 2-006f: setting system clock to 2001-01-01 00:00:00 UTC (978307200) [ 1.727549] aic_dvdd_fixed: disabling [ 1.732524] ldousb: disabling [ 1.738316] Waiting for root device /dev/mmcblk0p1... [ 1.784364] mmc1: new high speed MMC card at address 0001 [ 1.790235] mmcblk1: mmc1:0001 S10004 3.56 GiB [ 1.795082] mmcblk1boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 1.801366] mmcblk1boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 1.808147] mmcblk1: p1

[PYBOOT] [beagleboard-x15 01:49]: Timed out waiting for "<type 'str'>":

[PYBOOT] [beagleboard-x15 01:50]: got exception: timeout ~$off

[PYBOOT] [beagleboard-x15 01:52]: Done. Board beagleboard-x15-arm-omap2plus_defconfig failure log: -------------------------------------------------

[ 2.184377] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 2.191240] of_get_named_gpiod_flags: parsed 'cd-gpios' property of node '/ocp/mmc@4809c000[0]' - status (0) [ 2.201627] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 2.206498] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer wp [ 2.212819] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 2.219666] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@4809c000[0]' [ 2.229261] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@4809c000[0]' [ 2.238757] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 2.245812] omap_hsmmc 4809c000.mmc: lookup for GPIO wp failed [ 2.293514] omap_hsmmc 480b4000.mmc: GPIO lookup for consumer cd [ 2.299804] omap_hsmmc 480b4000.mmc: using device tree for GPIO lookup [ 2.306677] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/ocp/mmc@480b4000[0]' [ 2.316276] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/ocp/mmc@480b4000[0]' [ 2.325773] omap_hsmmc 480b4000.mmc: using lookup tables for GPIO lookup [ 2.332822] omap_hsmmc 480b4000.mmc: lookup for GPIO cd failed [ 2.338942] omap_hsmmc 480b4000.mmc: GPIO lookup for consumer wp [ 2.345261] omap_hsmmc 480b4000.mmc: using device tree for GPIO lookup [ 2.352107] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@480b4000[0]' [ 2.361695] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@480b4000[0]' [ 2.371196] omap_hsmmc 480b4000.mmc: using lookup tables for GPIO lookup [ 2.378241] omap_hsmmc 480b4000.mmc: lookup for GPIO wp failed [ 2.384914] vdd_3v3: supplied by regen1 [ 2.423744] hctosys: unable to open rtc device (rtc0) [ 2.429055] sr_init: No PMIC hook to init smartreflex [ 2.434597] sr_init: platform driver register failed for SR [ 2.482052] aic_dvdd_fixed: disabling [ 2.486270] ldousb: disabling [ 2.489532] mmc1: new high speed MMC card at address 0001 [ 2.497566] mmcblk1: mmc1:0001 S10004 3.56 GiB [ 2.503066] mmcblk1boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 2.509851] mmcblk1boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 2.518327] mmcblk1: p1 [ 2.525597] Waiting for root device /dev/mmcblk0p1...

[PYBOOT] [beagleboard-x15 01:40]: Timed out waiting for "<type 'str'>":

[PYBOOT] [beagleboard-x15 01:41]: got exception: timeout ~$off

[PYBOOT] [beagleboard-x15 01:42]: Done. Board beaver-arm-multi_v7_defconfig failure log: -------------------------------------------------

[ 3.153456] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 3.159040] r8169 0000:01:00.0: enabling device (0140 -> 0143) [ 3.166137] r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xf09f2000, 02:04:4b:01:60:99, XID 0c900800 IRQ 375 [ 3.176137] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 3.185551] +VDD_5V_HDMI: supplied by sys_3v3,vdd_3v3_alw [ 3.191061] vdd_1v8_gen: supplied by vdd_5v_in [ 3.197282] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.203906] [drm] No driver support for vblank timestamp query. [ 3.209842] drm drm: No connectors reported connected with modes [ 3.215848] [drm] Cannot find any crtc or sizes - going 1024x768 [ 3.241180] Console: switching to colour frame buffer device 128x48 [ 3.253432] drm drm: fb0: frame buffer device [ 3.268414] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.277037] usb3_vbus: supplied by vdd_5v_in [ 3.283459] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 3.289917] tegra-ehci 7d004000.usb: EHCI Host Controller [ 3.295326] tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1 [ 3.303163] tegra-ehci 7d004000.usb: irq 343, io mem 0x7d004000 [ 3.318425] tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.00 [ 3.325266] hub 1-0:1.0: USB hub found [ 3.329038] hub 1-0:1.0: 1 port detected [ 3.333930] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.339341] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 3.347083] tegra-ehci 7d008000.usb: irq 344, io mem 0x7d008000 [ 3.358418] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.00 [ 3.365171] hub 2-0:1.0: USB hub found [ 3.368939] hub 2-0:1.0: 1 port detected [ 3.377719] tps65910-rtc tps65910-rtc: setting system clock to 2000-01-01 00:00:02 UTC (946684802) [ 3.391295] vdd_sata,avdd_plle: disabling [ 3.396100] usb1_vbus: disabling [ 3.400215] Waiting for root device /dev/mmcblk0p1... [ 3.678425] usb 2-1: new high-speed USB device number 2 using tegra-ehci [ 4.616925] asix 2-1:1.0 eth1: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 58:6d:8f:50:ba:18

[PYBOOT] [beaver 01:50]: Timed out waiting for "<type 'str'>":

[PYBOOT] [beaver 01:51]: got exception: timeout ~$off

[PYBOOT] [beaver 01:52]: Done. Board beaver-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------

[ 3.117739] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 3.123323] r8169 0000:01:00.0: enabling device (0140 -> 0143) [ 3.129933] r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xf087e000, 02:04:4b:01:60:99, XID 0c900800 IRQ 375 [ 3.139925] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 3.149084] +VDD_5V_HDMI: supplied by sys_3v3,vdd_3v3_alw [ 3.154556] vdd_1v8_gen: supplied by vdd_5v_in [ 3.160243] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.166853] [drm] No driver support for vblank timestamp query. [ 3.172781] drm drm: No connectors reported connected with modes [ 3.178782] [drm] Cannot find any crtc or sizes - going 1024x768 [ 3.198121] Console: switching to colour frame buffer device 128x48 [ 3.209910] drm drm: fb0: frame buffer device [ 3.214347] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.222239] usb3_vbus: supplied by vdd_5v_in [ 3.228485] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 3.234931] tegra-ehci 7d004000.usb: EHCI Host Controller [ 3.240335] tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1 [ 3.248051] tegra-ehci 7d004000.usb: irq 343, io mem 0x7d004000 [ 3.262829] tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.00 [ 3.269193] hub 1-0:1.0: USB hub found [ 3.272957] hub 1-0:1.0: 1 port detected [ 3.277595] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.283003] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 3.290661] tegra-ehci 7d008000.usb: irq 344, io mem 0x7d008000 [ 3.302826] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.00 [ 3.309096] hub 2-0:1.0: USB hub found [ 3.312854] hub 2-0:1.0: 1 port detected [ 3.320350] tps65910-rtc tps65910-rtc: setting system clock to 2000-01-01 00:00:01 UTC (946684801) [ 3.333408] vdd_sata,avdd_plle: disabling [ 3.337793] usb1_vbus: disabling [ 3.341726] Waiting for root device /dev/mmcblk0p1... [ 3.622831] usb 2-1: new high-speed USB device number 2 using tegra-ehci [ 4.561367] asix 2-1:1.0 eth1: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 58:6d:8f:50:ba:18

[PYBOOT] [beaver 01:52]: Timed out waiting for "<type 'str'>":

[PYBOOT] [beaver 01:53]: got exception: timeout ~$off

[PYBOOT] [beaver 01:55]: Done. Board beaver-arm-tegra_defconfig failure log: -------------------------------------------------

[ 3.424000] r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xf087e000, 02:04:4b:01:60:99, XID 0c900800 IRQ 375 [ 3.434002] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 3.442887] +VDD_5V_HDMI: supplied by sys_3v3,vdd_3v3_alw [ 3.448404] vdd_1v8_gen: supplied by vdd_5v_in [ 3.456915] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.463535] [drm] No driver support for vblank timestamp query. [ 3.469536] drm drm: No connectors reported connected with modes [ 3.475548] [drm] Cannot find any crtc or sizes - going 1024x768 [ 3.501325] Console: switching to colour frame buffer device 128x48 [ 3.513145] drm drm: fb0: frame buffer device [ 3.540495] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.548023] usb3_vbus: supplied by vdd_5v_in [ 3.554147] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 3.560613] tegra-ehci 7d004000.usb: EHCI Host Controller [ 3.566036] tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1 [ 3.574020] tegra-ehci 7d004000.usb: irq 343, io mem 0x7d004000 [ 3.590501] tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.00 [ 3.598205] hub 1-0:1.0: USB hub found [ 3.601986] hub 1-0:1.0: 1 port detected [ 3.606790] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.612218] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 3.620090] tegra-ehci 7d008000.usb: irq 344, io mem 0x7d008000 [ 3.640497] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.00 [ 3.648085] hub 2-0:1.0: USB hub found [ 3.651858] hub 2-0:1.0: 1 port detected [ 3.660197] tps65910-rtc tps65910-rtc: setting system clock to 2000-01-01 00:00:02 UTC (946684802) [ 3.679017] vdd_sata,avdd_plle: disabling [ 3.683546] usb1_vbus: disabling [ 3.686972] ALSA device list: [ 3.689928] #0: NVIDIA Tegra Beaver [ 3.694170] Waiting for root device /dev/mmcblk0p1... [ 3.970500] usb 2-1: new high-speed USB device number 2 using tegra-ehci [ 4.955879] asix 2-1:1.0 eth1: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 58:6d:8f:50:ba:18

[PYBOOT] [beaver 01:42]: Timed out waiting for "<type 'str'>":

[PYBOOT] [beaver 01:43]: got exception: timeout ~$off

[PYBOOT] [beaver 01:44]: Done. Board chitra-powerpc-ppc64_defconfig failure log: -------------------------------------------------

SLUB: HWalign=128, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 Hierarchical RCU implementation. Build-time adjustment of leaf fanout to 64. RCU restricting CPUs from NR_CPUS=32 to nr_cpu_ids=2. RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=2 NR_IRQS:512 nr_irqs:512 16 OpenPIC addr: fc000000 mpic: Setting up MPIC "PASEMI-OPIC" version 1.3 at fc000000, max 2 CPUs mpic: ISU size: 1024, shift: 10, mask: 3ff mpic: Initializing for 1024 sources time_init: decrementer frequency = 66.666666 MHz time_init: processor frequency = 2000.000000 MHz clocksource: timebase: mask: 0xffffffffffffffff max_cycles: 0xf6018975a, max_idle_ns: 440795204712 ns clocksource: timebase mult[f000003] shift[24] registered clockevent: decrementer mult[1111110e] shift[32] cpu[0] Console: colour dummy device 80x25 pid_max: default: 32768 minimum: 301 Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes) mpic: requesting IPIs... Brought up 2 CPUs devtmpfs: initialized EEH: devices created clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns kworker/u4:0 (21) used greatest stack depth: 13472 bytes left NET: Registered protocol family 16 eeh_init: Platform EEH operation not found IBM eBus Device Driver kworker/u4:1 (24) used greatest stack depth: 12944 bytes left kworker/u4:1 (35) used greatest stack depth: 11744 bytes left cpuidle: using governor menu kworker/u4:0 (38) used greatest stack d [PYBOOT] [chitra 01:45]: Timed out waiting for "<type 'str'>":

[PYBOOT] [chitra 01:46]: got exception: timeout ~$off

[PYBOOT] [chitra 01:47]: Done. Board colombus-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------

[?25l[?1c7[ ok 8[?25h[?0c. [....] Synthesizing the initial hotplug events...[?25l[?1c7[ ok 8[?25h[?0cdone. [....] Waiting for /dev to be fully populated...[?25l[?1c7[ ok 8[?25h[?0cdone. [....] Activating swap...[?25l[?1c7[ ok 8[?25h[?0cdone. [ 42.239103] EXT4-fs (mmcblk0p1): warning: mounting fs with errors, running e2fsck is recommended [ 42.253457] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [....] Cleaning up temporary files... /tmp[?25l[?1c7[ ok 8[?25h[?0c. [....] Activating lvm and md swap...[?25l[?1c7[ ok 8[?25h[?0cdone. [....] Checking file systems...fsck from util-linux 2.20.1 [?25l[?1c7[ ok 8[?25h[?0cdone. [....] Mounting local filesystems...[?25l[?1c7[ ok 8[?25h[?0cdone. [....] Activating swapfile swap...[?25l[?1c7[ ok 8[?25h[?0cdone. [....] Cleaning up temporary files...[?25l[?1c7[ ok 8[?25h[?0c. [....] Setting kernel variables ...[?25l[?1c7[ ok 8[?25h[?0cdone. [ 85.772953] random: dd urandom read with 59 bits of entropy available [....] Configuring network interfaces...Internet Systems Consortium DHCP Client 4.2.2 Copyright 2004-2011 Internet Systems Consortium. All rights reserved. For info, please visit https://www.isc.org/software/dhcp/

[ 90.196165] eth0: device MAC address b2:8a:ca:9c:18:e1 [ 90.349559] RX IPC Checksum Offload disabled [ 90.354181] No MAC Management Counters available [ 90.359949] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready Listening on LPF/eth0/b2:8a:ca:9c:18:e1 Sending on LPF/eth0/b2:8a:ca:9c:18:e1 Sending on Socket/fallback DHCPREQUEST on eth0 to 255.255.255.255 port 67 DHCPREQUEST on eth0 to 255.255.255.255 port 67 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 8 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 15 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 17 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 15

[PYBOOT] [colombus 03:18]: Timed out waiting for "<type 'str'>":

[PYBOOT] [colombus 03:19]: got exception: timeout ~$off

[PYBOOT] [colombus 03:20]: Done. Board cosmic-arm-imx_v6_v7_defconfig failure log: -------------------------------------------------

[ 14.472871] blk_update_request: I/O error, dev mmcblk0, sector 3633185 [ 18.547111] mmcblk0: error -110 transferring data, sector 3633186, nr 230, cmd response 0x900, card status 0x0 [ 18.557442] blk_update_request: I/O error, dev mmcblk0, sector 3633186 [ 22.631635] mmcblk0: error -110 transferring data, sector 3633187, nr 229, cmd response 0x900, card status 0x0 [ 22.641958] blk_update_request: I/O error, dev mmcblk0, sector 3633187 [ 26.716216] mmcblk0: error -110 transferring data, sector 3633188, nr 228, cmd response 0x900, card status 0x0 [ 26.726551] blk_update_request: I/O error, dev mmcblk0, sector 3633188 [ 30.800755] mmcblk0: error -110 transferring data, sector 3633189, nr 227, cmd response 0x900, card status 0x0 [ 30.811085] blk_update_request: I/O error, dev mmcblk0, sector 3633189 [ 34.885343] mmcblk0: error -110 transferring data, sector 3633190, nr 226, cmd response 0x900, card status 0x0 [ 34.895676] blk_update_request: I/O error, dev mmcblk0, sector 3633190 [ 38.969871] mmcblk0: error -110 transferring data, sector 3633191, nr 225, cmd response 0x900, card status 0x0 [ 38.980227] blk_update_request: I/O error, dev mmcblk0, sector 3633191 [ 43.054566] mmcblk0: error -110 transferring data, sector 3633192, nr 224, cmd response 0x900, card status 0x0 [ 43.064889] blk_update_request: I/O error, dev mmcblk0, sector 3633192 [ 47.139135] mmcblk0: error -110 transferring data, sector 3633193, nr 223, cmd response 0x900, card status 0x0 [ 47.149458] blk_update_request: I/O error, dev mmcblk0, sector 3633193 [ 51.223708] mmcblk0: error -110 transferring data, sector 3633194, nr 222, cmd response 0x900, card status 0x0 [ 51.234028] blk_update_request: I/O error, dev mmcblk0, sector 3633194 [ 55.308267] mmcblk0: error -110 transferring data, sector 3633195, nr 221, cmd response 0x900, card status 0x0 [ 55.318591] blk_update_request: I/O error, dev mmcblk0, sector 3633195 [ 59.392841] mmcblk0: error -110 transferring data, sector 3633196, nr 220, cmd response 0x900, card status 0x0 [ 59.403162] blk_update_request: I/O error, dev mmcblk0, sector 3633196 [ 63.477401] mmcblk0: error -110 transferring data, sector 3633197, nr 219, cmd response 0x900, card status 0x0 [ 63.487725] blk_update_request: I/O error, dev mmcblk0, sector 3633197 [ 67.561915] mmcblk0: error -110 transferring data, sector 3633198, nr 218, cmd response 0x900, card status 0x0 [ 67.572243] blk_update_request: I/O error, dev mmcblk0, sector 3633198 [ 71.646488] mmcblk0: error -110 transferring data, sector 3633199, nr 217, cmd response 0x900, card status 0x0 [ 71.656814] blk_update_request: I/O error, dev mmcblk0, sector 3633199 [ 75.731012] mmcblk0: error -110 transferring data, sector 3633200, nr 216, cmd response 0x900, card status 0x0 [ 75.741342] blk_update_request: I/O error, dev mmcblk0, sector 3633200 [ 79.815589] mmcblk0: error -110 transferring data, sector 3633201, nr 215, cmd response 0x900, card status 0x0 [ 79.825913] blk_update_request: I/O error, dev mmcblk0, sector 3633201

[PYBOOT] [cosmic 01:58]: Timed out waiting for "<type 'str'>":

[PYBOOT] [cosmic 01:59]: got exception: timeout ~$off

[PYBOOT] [cosmic 02:00]: Done. Board cosmic-arm-multi_v7_defconfig failure log: -------------------------------------------------

[ 14.082847] blk_update_request: I/O error, dev mmcblk0, sector 3633185 [ 18.156833] mmcblk0: error -110 transferring data, sector 3633186, nr 230, cmd response 0x900, card status 0x0 [ 18.166914] blk_update_request: I/O error, dev mmcblk0, sector 3633186 [ 22.240905] mmcblk0: error -110 transferring data, sector 3633187, nr 229, cmd response 0x900, card status 0x0 [ 22.250984] blk_update_request: I/O error, dev mmcblk0, sector 3633187 [ 26.324959] mmcblk0: error -110 transferring data, sector 3633188, nr 228, cmd response 0x900, card status 0x0 [ 26.335035] blk_update_request: I/O error, dev mmcblk0, sector 3633188 [ 30.409026] mmcblk0: error -110 transferring data, sector 3633189, nr 227, cmd response 0x900, card status 0x0 [ 30.419104] blk_update_request: I/O error, dev mmcblk0, sector 3633189 [ 34.493092] mmcblk0: error -110 transferring data, sector 3633190, nr 226, cmd response 0x900, card status 0x0 [ 34.503172] blk_update_request: I/O error, dev mmcblk0, sector 3633190 [ 38.577160] mmcblk0: error -110 transferring data, sector 3633191, nr 225, cmd response 0x900, card status 0x0 [ 38.587226] blk_update_request: I/O error, dev mmcblk0, sector 3633191 [ 42.661216] mmcblk0: error -110 transferring data, sector 3633192, nr 224, cmd response 0x900, card status 0x0 [ 42.671287] blk_update_request: I/O error, dev mmcblk0, sector 3633192 [ 46.745266] mmcblk0: error -110 transferring data, sector 3633193, nr 223, cmd response 0x900, card status 0x0 [ 46.755338] blk_update_request: I/O error, dev mmcblk0, sector 3633193 [ 50.829327] mmcblk0: error -110 transferring data, sector 3633194, nr 222, cmd response 0x900, card status 0x0 [ 50.839398] blk_update_request: I/O error, dev mmcblk0, sector 3633194 [ 54.913385] mmcblk0: error -110 transferring data, sector 3633195, nr 221, cmd response 0x900, card status 0x0 [ 54.923458] blk_update_request: I/O error, dev mmcblk0, sector 3633195 [ 58.997443] mmcblk0: error -110 transferring data, sector 3633196, nr 220, cmd response 0x900, card status 0x0 [ 59.007518] blk_update_request: I/O error, dev mmcblk0, sector 3633196 [ 63.081505] mmcblk0: error -110 transferring data, sector 3633197, nr 219, cmd response 0x900, card status 0x0 [ 63.091577] blk_update_request: I/O error, dev mmcblk0, sector 3633197 [ 67.165558] mmcblk0: error -110 transferring data, sector 3633198, nr 218, cmd response 0x900, card status 0x0 [ 67.175638] blk_update_request: I/O error, dev mmcblk0, sector 3633198 [ 71.249619] mmcblk0: error -110 transferring data, sector 3633199, nr 217, cmd response 0x900, card status 0x0 [ 71.259697] blk_update_request: I/O error, dev mmcblk0, sector 3633199 [ 75.333685] mmcblk0: error -110 transferring data, sector 3633200, nr 216, cmd response 0x900, card status 0x0 [ 75.343767] blk_update_request: I/O error, dev mmcblk0, sector 3633200 [ 79.417755] mmcblk0: error -110 transferring data, sector 3633201, nr 215, cmd response 0x900, card status 0x0 [ 79.427835] blk_update_request: I/O error, dev mmcblk0, sector 3633201

[PYBOOT] [cosmic 02:07]: Timed out waiting for "<type 'str'>":

[PYBOOT] [cosmic 02:08]: got exception: timeout ~$off

[PYBOOT] [cosmic 02:09]: Done. Board cosmic-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------

[ 13.872537] blk_update_request: I/O error, dev mmcblk0, sector 3633185 [ 17.946457] mmcblk0: error -110 transferring data, sector 3633186, nr 230, cmd response 0x900, card status 0x0 [ 17.956510] blk_update_request: I/O error, dev mmcblk0, sector 3633186 [ 22.030430] mmcblk0: error -110 transferring data, sector 3633187, nr 229, cmd response 0x900, card status 0x0 [ 22.040484] blk_update_request: I/O error, dev mmcblk0, sector 3633187 [ 26.114404] mmcblk0: error -110 transferring data, sector 3633188, nr 228, cmd response 0x900, card status 0x0 [ 26.124466] blk_update_request: I/O error, dev mmcblk0, sector 3633188 [ 30.198384] mmcblk0: error -110 transferring data, sector 3633189, nr 227, cmd response 0x900, card status 0x0 [ 30.208439] blk_update_request: I/O error, dev mmcblk0, sector 3633189 [ 34.282358] mmcblk0: error -110 transferring data, sector 3633190, nr 226, cmd response 0x900, card status 0x0 [ 34.292423] blk_update_request: I/O error, dev mmcblk0, sector 3633190 [ 38.366347] mmcblk0: error -110 transferring data, sector 3633191, nr 225, cmd response 0x900, card status 0x0 [ 38.376412] blk_update_request: I/O error, dev mmcblk0, sector 3633191 [ 42.450342] mmcblk0: error -110 transferring data, sector 3633192, nr 224, cmd response 0x900, card status 0x0 [ 42.460412] blk_update_request: I/O error, dev mmcblk0, sector 3633192 [ 46.534334] mmcblk0: error -110 transferring data, sector 3633193, nr 223, cmd response 0x900, card status 0x0 [ 46.544388] blk_update_request: I/O error, dev mmcblk0, sector 3633193 [ 50.618301] mmcblk0: error -110 transferring data, sector 3633194, nr 222, cmd response 0x900, card status 0x0 [ 50.628352] blk_update_request: I/O error, dev mmcblk0, sector 3633194 [ 54.702266] mmcblk0: error -110 transferring data, sector 3633195, nr 221, cmd response 0x900, card status 0x0 [ 54.712317] blk_update_request: I/O error, dev mmcblk0, sector 3633195 [ 58.786229] mmcblk0: error -110 transferring data, sector 3633196, nr 220, cmd response 0x900, card status 0x0 [ 58.796282] blk_update_request: I/O error, dev mmcblk0, sector 3633196 [ 62.870203] mmcblk0: error -110 transferring data, sector 3633197, nr 219, cmd response 0x900, card status 0x0 [ 62.880255] blk_update_request: I/O error, dev mmcblk0, sector 3633197 [ 66.954174] mmcblk0: error -110 transferring data, sector 3633198, nr 218, cmd response 0x900, card status 0x0 [ 66.964228] blk_update_request: I/O error, dev mmcblk0, sector 3633198 [ 71.038148] mmcblk0: error -110 transferring data, sector 3633199, nr 217, cmd response 0x900, card status 0x0 [ 71.048203] blk_update_request: I/O error, dev mmcblk0, sector 3633199 [ 75.122122] mmcblk0: error -110 transferring data, sector 3633200, nr 216, cmd response 0x900, card status 0x0 [ 75.132184] blk_update_request: I/O error, dev mmcblk0, sector 3633200 [ 79.206098] mmcblk0: error -110 transferring data, sector 3633201, nr 215, cmd response 0x900, card status 0x0 [ 79.216157] blk_update_request: I/O error, dev mmcblk0, sector 3633201

[PYBOOT] [cosmic 02:08]: Timed out waiting for "<type 'str'>":

[PYBOOT] [cosmic 02:09]: got exception: timeout ~$off

[PYBOOT] [cosmic 02:11]: Done. Board dalmore-arm-multi_lpae_defconfig failure log: -------------------------------------------------

[ 2.487382] Key type dns_resolver registered [ 2.493782] ThumbEE CPU extension supported. [ 2.498203] Registering SWP/SWPB emulation handler [ 2.530009] vdd-sys-5v0: supplied by vdd_ac_bat [ 2.536966] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 2.546727] vdd_hdmi_5v0: supplied by vdd-sys-5v0 [ 2.563218] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.569966] [drm] No driver support for vblank timestamp query. [ 2.591525] mmc1: new high speed MMC card at address 0001 [ 2.599036] mmcblk1: mmc1:0001 SEM32G 29.1 GiB [ 2.606385] mmcblk1boot0: mmc1:0001 SEM32G partition 1 4.00 MiB [ 2.614824] mmcblk1boot1: mmc1:0001 SEM32G partition 2 4.00 MiB [ 2.622765] mmcblk1rpmb: mmc1:0001 SEM32G partition 3 4.00 MiB [ 2.634025] mmcblk1: p1 [ 2.751351] Console: switching to colour frame buffer device 240x75 [ 2.839223] drm drm: fb0: frame buffer device [ 2.854548] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 2.864621] usb2_vbus: supplied by vdd-sys-5v0 [ 2.876171] tegra-ehci 7d008000.usb: EHCI Host Controller [ 2.881768] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 2.890597] tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 [ 2.904691] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 2.915120] hub 1-0:1.0: USB hub found [ 2.919126] hub 1-0:1.0: 1 port detected [ 2.929237] input: gpio-keys as /devices/soc0/gpio-keys/input/input0 [ 2.943100] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 3.005326] dvdd_ts: disabling [ 3.008425] usb1_vbus: disabling [ 3.011797] vdd_cam_1v8_reg: disabling [ 3.019227] Waiting for root device /dev/mmcblk0p1... [ 3.229695] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 4.207265] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f [ 49.849658] random: nonblocking pool is initialized

[PYBOOT] [dalmore 01:50]: Timed out waiting for "<type 'str'>":

[PYBOOT] [dalmore 01:51]: got exception: timeout ~$off

[PYBOOT] [dalmore 01:52]: Done. Board dalmore-arm-multi_v7_defconfig failure log: -------------------------------------------------

[ 2.481963] Key type dns_resolver registered [ 2.488366] ThumbEE CPU extension supported. [ 2.492787] Registering SWP/SWPB emulation handler [ 2.525279] vdd-sys-5v0: supplied by vdd_ac_bat [ 2.532415] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 2.541892] vdd_hdmi_5v0: supplied by vdd-sys-5v0 [ 2.557756] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.564512] [drm] No driver support for vblank timestamp query. [ 2.584466] mmc1: new high speed MMC card at address 0001 [ 2.594398] mmcblk1: mmc1:0001 SEM32G 29.1 GiB [ 2.602467] mmcblk1boot0: mmc1:0001 SEM32G partition 1 4.00 MiB [ 2.611074] mmcblk1boot1: mmc1:0001 SEM32G partition 2 4.00 MiB [ 2.618993] mmcblk1rpmb: mmc1:0001 SEM32G partition 3 4.00 MiB [ 2.629406] mmcblk1: p1 [ 2.742848] Console: switching to colour frame buffer device 240x75 [ 2.830543] drm drm: fb0: frame buffer device [ 2.849628] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 2.859654] usb2_vbus: supplied by vdd-sys-5v0 [ 2.871212] tegra-ehci 7d008000.usb: EHCI Host Controller [ 2.876805] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 2.885591] tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 [ 2.899640] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 2.909910] hub 1-0:1.0: USB hub found [ 2.913918] hub 1-0:1.0: 1 port detected [ 2.924024] input: gpio-keys as /devices/soc0/gpio-keys/input/input0 [ 2.937918] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 3.000078] dvdd_ts: disabling [ 3.003177] usb1_vbus: disabling [ 3.006532] vdd_cam_1v8_reg: disabling [ 3.013905] Waiting for root device /dev/mmcblk0p1... [ 3.224643] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 4.202193] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f [ 49.439605] random: nonblocking pool is initialized

[PYBOOT] [dalmore 01:58]: Timed out waiting for "<type 'str'>":

[PYBOOT] [dalmore 01:59]: got exception: timeout ~$off

[PYBOOT] [dalmore 02:00]: Done. Board dalmore-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------

[ 2.036959] can: broadcast manager protocol (rev 20120528 t) [ 2.042712] can: netlink gateway (rev 20130117) max_hops=1 [ 2.049408] Key type dns_resolver registered [ 2.054530] ThumbEE CPU extension supported. [ 2.085608] vdd-sys-5v0: supplied by vdd_ac_bat [ 2.090548] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 2.100637] vdd_hdmi_5v0: supplied by vdd-sys-5v0 [ 2.121776] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.128455] [drm] No driver support for vblank timestamp query. [ 2.292154] Console: switching to colour frame buffer device 240x75 [ 2.380129] drm drm: fb0: frame buffer device [ 2.384814] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 2.393018] usb2_vbus: supplied by vdd-sys-5v0 [ 2.401977] tegra-ehci 7d008000.usb: EHCI Host Controller [ 2.407537] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 2.415438] mmc1: new high speed MMC card at address 0001 [ 2.422095] mmcblk1: mmc1:0001 SEM32G 29.1 GiB [ 2.427122] mmcblk1boot0: mmc1:0001 SEM32G partition 1 4.00 MiB [ 2.433849] tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 [ 2.439988] mmcblk1boot1: mmc1:0001 SEM32G partition 2 4.00 MiB [ 2.446370] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 2.452511] mmcblk1rpmb: mmc1:0001 SEM32G partition 3 4.00 MiB [ 2.460299] mmcblk1: p1 [ 2.465328] hub 1-0:1.0: USB hub found [ 2.472336] hub 1-0:1.0: 1 port detected [ 2.482035] input: gpio-keys as /devices/soc0/gpio-keys/input/input0 [ 2.493375] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 2.534084] dvdd_ts: disabling [ 2.537239] usb1_vbus: disabling [ 2.540520] vdd_cam_1v8_reg: disabling [ 2.546002] Waiting for root device /dev/mmcblk0p1... [ 2.785191] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 3.739215] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f

[PYBOOT] [dalmore 01:51]: Timed out waiting for "<type 'str'>":

[PYBOOT] [dalmore 01:52]: got exception: timeout ~$off

[PYBOOT] [dalmore 01:53]: Done. Board dalmore-arm-tegra_defconfig failure log: -------------------------------------------------

[ 2.668670] Bluetooth: RFCOMM ver 1.11 [ 2.672621] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 2.678019] Bluetooth: BNEP socket layer initialized [ 2.683115] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 2.689119] Bluetooth: HIDP socket layer initialized [ 2.696113] Key type dns_resolver registered [ 2.705715] Registering SWP/SWPB emulation handler [ 2.735707] vdd-sys-5v0: supplied by vdd_ac_bat [ 2.742013] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 2.749769] vdd_hdmi_5v0: supplied by vdd-sys-5v0 [ 2.774263] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.781046] [drm] No driver support for vblank timestamp query. [ 2.957327] Console: switching to colour frame buffer device 240x75 [ 3.043612] drm drm: fb0: frame buffer device [ 3.071062] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.078337] usb2_vbus: supplied by vdd-sys-5v0 [ 3.086795] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.092614] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 3.101802] tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 [ 3.121077] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 3.135171] hub 1-0:1.0: USB hub found [ 3.139135] hub 1-0:1.0: 1 port detected [ 3.153026] input: gpio-keys as /devices/soc0/gpio-keys/input/input1 [ 3.168379] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:01 UTC (946684801) [ 3.263406] dvdd_ts: disabling [ 3.266512] usb1_vbus: disabling [ 3.269778] vdd_cam_1v8_reg: disabling [ 3.274595] ALSA device list: [ 3.277610] #0: NVIDIA Tegra Dalmore [ 3.283619] Waiting for root device /dev/mmcblk0p1... [ 3.460953] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 4.486433] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f [ 61.608282] random: nonblocking pool is initialized

[PYBOOT] [dalmore 01:45]: Timed out waiting for "<type 'str'>":

[PYBOOT] [dalmore 01:46]: got exception: timeout ~$off

[PYBOOT] [dalmore 01:47]: Done. Board odroidu3-arm-exynos_defconfig failure log: -------------------------------------------------

[ 1.648868] dwmmc_exynos 12550000.mmc: allocated mmc-pwrseq [ 1.654162] usb 1-3: new high-speed USB device number 2 using exynos-ehci [ 1.687758] dwmmc_exynos 12550000.mmc: 1 slots initialized [ 1.688996] usbcore: registered new interface driver usbhid [ 1.694178] usbhid: USB HID core driver [ 1.702943] NET: Registered protocol family 10 [ 1.703582] sit: IPv6 over IPv4 tunneling driver [ 1.706797] NET: Registered protocol family 17 [ 1.710811] NET: Registered protocol family 15 [ 1.715267] Key type dns_resolver registered [ 1.719594] Registering SWP/SWPB emulation handler [ 1.728460] s3c-rtc 10070000.rtc: rtc disabled, re-enabling [ 1.729798] s3c-rtc 10070000.rtc: warning: invalid RTC value so initializing it [ 1.737240] s3c-rtc 10070000.rtc: rtc core: registered s3c as rtc1 [ 1.756928] mmc_host mmc1: Bus speed (slot 0) = 44000000Hz (slot req 52000000Hz, actual 44000000HZ div = 0) [ 1.761232] mmc_host mmc1: Bus speed (slot 0) = 73333333Hz (slot req 52000000Hz, actual 36666666HZ div = 1) [ 1.771044] mmc1: new DDR MMC card at address 0001 [ 1.775668] max98090 1-0010: MAX98090 REVID=0x43 [ 1.780362] mmcblk1: mmc1:0001 008G92 7.28 GiB [ 1.784819] mmcblk1boot0: mmc1:0001 008G92 partition 1 4.00 MiB [ 1.790775] mmcblk1boot1: mmc1:0001 008G92 partition 2 4.00 MiB [ 1.796671] mmcblk1rpmb: mmc1:0001 008G92 partition 3 512 KiB [ 1.803218] mmcblk1: p1 p2 [ 1.804933] max98090 1-0010: use default 2.8v micbias [ 1.816274] asoc-simple-card sound: HiFi <-> 3830000.i2s mapping ok [ 1.825248] input: gpio_keys as /devices/platform/gpio_keys/input/input0 [ 1.856741] max77686-rtc max77686-rtc: setting system clock to 2000-01-01 01:00:19 UTC (946688419) [ 1.874540] VDD10_HDMI_1.0V: disabling [ 1.875226] vdd_g3d: disabling [ 1.876300] BUCK8_2.8V: disabling [ 1.880288] ALSA device list: [ 1.881930] #0: Odroid-U3 [ 1.885567] Waiting for root device /dev/mmcblk0p2...

[PYBOOT] [odroidu3 01:44]: Timed out waiting for "<type 'str'>":

[PYBOOT] [odroidu3 01:45]: got exception: timeout ~$off

[PYBOOT] [odroidu3 01:46]: Done. Board seaboard-arm-multi_v7_defconfig failure log: -------------------------------------------------

[ 1.656627] vdd_ldo7,avdd_hdmi,vdd_fuse: supplied by vdd_sm2,vin_ldo* [ 1.671099] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 1.677609] tegra-ehci c5000000.usb: EHCI Host Controller [ 1.683071] tegra-ehci c5000000.usb: new USB bus registered, assigned bus number 3 [ 1.690999] tegra-ehci c5000000.usb: irq 287, io mem 0xc5000000 [ 1.733398] mmc0: queuing unknown CIS tuple 0x80 (50 bytes) [ 1.733909] tegra-ehci c5000000.usb: USB 2.0 started, EHCI 1.00 [ 1.735115] hub 3-0:1.0: USB hub found [ 1.735177] hub 3-0:1.0: 1 port detected [ 1.754672] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.760992] mmc0: queuing unknown CIS tuple 0x80 (7 bytes) [ 1.764006] mmc0: queuing unknown CIS tuple 0x80 (7 bytes) [ 1.771791] mmc0: queuing unknown CIS tuple 0x80 (19 bytes) [ 1.777896] [drm] No driver support for vblank timestamp query. [ 1.792006] mmc0: queuing unknown CIS tuple 0x02 (1 bytes) [ 1.798748] mmc2: switch to bus width 8 failed [ 1.803585] mmc0: new SDIO card at address 0001 [ 1.824891] mmc2: switch to bus width 4 failed [ 1.824912] mmc2: new high speed MMC card at address 0001 [ 1.825634] mmcblk2: mmc2:0001 MMC08G 7.46 GiB [ 1.825943] mmcblk2boot0: mmc2:0001 MMC08G partition 1 512 KiB [ 1.826225] mmcblk2boot1: mmc2:0001 MMC08G partition 2 512 KiB [ 1.827847] mmcblk2: p3 [ 1.862490] Console: switching to colour frame buffer device 170x48 [ 1.919810] drm drm: fb0: frame buffer device [ 1.938927] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 1.946053] input: gpio-keys as /devices/soc0/gpio-keys/input/input2 [ 1.953280] tps6586x-rtc tps6586x-rtc: setting system clock to 2009-01-01 00:00:00 UTC (1230768000) [ 1.969362] vdd_1v5: disabling [ 1.972426] vdd_1v2: disabling [ 2.582449] asix 2-1:1.0 eth0: register 'asix' at usb-c5008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, c0:c1:c0:13:08:60 [ 2.594049] Waiting for root device /dev/mmcblk0p3... [ 58.364002] random: nonblocking pool is initialized

[PYBOOT] [seaboard 01:55]: Timed out waiting for "<type 'str'>":

[PYBOOT] [seaboard 01:56]: got exception: timeout ~$off

[PYBOOT] [seaboard 01:57]: Done. Board seaboard-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------

[ 1.617776] vdd_ldo8,avdd_hdmi_pll: supplied by vdd_sm2,vin_ldo* [ 1.624103] vdd_ldo7,avdd_hdmi,vdd_fuse: supplied by vdd_sm2,vin_ldo* [ 1.634026] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 1.640477] tegra-ehci c5000000.usb: EHCI Host Controller [ 1.645888] tegra-ehci c5000000.usb: new USB bus registered, assigned bus number 3 [ 1.653641] tegra-ehci c5000000.usb: irq 287, io mem 0xc5000000 [ 1.669164] tegra-ehci c5000000.usb: USB 2.0 started, EHCI 1.00 [ 1.675731] hub 3-0:1.0: USB hub found [ 1.679526] hub 3-0:1.0: 1 port detected [ 1.690167] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.696793] [drm] No driver support for vblank timestamp query. [ 1.724264] mmc2: switch to bus width 8 failed [ 1.724518] mmc2: switch to bus width 4 failed [ 1.724529] mmc2: new high speed MMC card at address 0001 [ 1.724899] mmcblk2: mmc2:0001 MMC08G 7.46 GiB [ 1.725027] mmcblk2boot0: mmc2:0001 MMC08G partition 1 512 KiB [ 1.725184] mmcblk2boot1: mmc2:0001 MMC08G partition 2 512 KiB [ 1.726348] mmcblk2: p3 [ 1.730083] mmc0: queuing unknown CIS tuple 0x80 (50 bytes) [ 1.737706] mmc0: queuing unknown CIS tuple 0x80 (7 bytes) [ 1.740456] mmc0: queuing unknown CIS tuple 0x80 (7 bytes) [ 1.747501] mmc0: queuing unknown CIS tuple 0x80 (19 bytes) [ 1.769614] Console: switching to colour frame buffer device 170x48 [ 1.845309] drm drm: fb0: frame buffer device [ 1.849786] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 1.856280] input: gpio-keys as /devices/soc0/gpio-keys/input/input2 [ 1.863212] tps6586x-rtc tps6586x-rtc: setting system clock to 2009-01-01 00:00:00 UTC (1230768000) [ 1.875130] vdd_1v5: disabling [ 1.878212] vdd_1v2: disabling [ 1.886006] mmc0: queuing unknown CIS tuple 0x02 (1 bytes) [ 1.894939] mmc0: new SDIO card at address 0001 [ 2.542416] asix 2-1:1.0 eth0: register 'asix' at usb-c5008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, c0:c1:c0:13:08:60 [ 2.553288] Waiting for root device /dev/mmcblk0p3...

[PYBOOT] [seaboard 01:56]: Timed out waiting for "<type 'str'>":

[PYBOOT] [seaboard 01:57]: got exception: timeout ~$off

[PYBOOT] [seaboard 01:58]: Done. Board seaboard-arm-tegra_defconfig failure log: -------------------------------------------------

[ 1.648308] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 1.654320] Bluetooth: HIDP socket layer initialized [ 1.660056] Key type dns_resolver registered [ 1.665784] Registering SWP/SWPB emulation handler [ 1.682164] tegra-dc 54200000.dc: failed to probe RGB output: -517 [ 1.689082] VDDIO_HDMI: supplied by vdd_5v0 [ 1.693713] vdd_sys: supplied by vdd_5v0 [ 1.697783] vdd_sm2,vin_ldo*: supplied by vdd_sys [ 1.702923] vdd_ldo8,avdd_hdmi_pll: supplied by vdd_sm2,vin_ldo* [ 1.709663] vdd_ldo7,avdd_hdmi,vdd_fuse: supplied by vdd_sm2,vin_ldo* [ 1.718417] mmc0: queuing unknown CIS tuple 0x02 (1 bytes) [ 1.726250] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 1.729215] mmc0: new SDIO card at address 0001 [ 1.737323] tegra-ehci c5000000.usb: EHCI Host Controller [ 1.742765] tegra-ehci c5000000.usb: new USB bus registered, assigned bus number 3 [ 1.750688] tegra-ehci c5000000.usb: irq 287, io mem 0xc5000000 [ 1.770064] tegra-ehci c5000000.usb: USB 2.0 started, EHCI 1.00 [ 1.777921] hub 3-0:1.0: USB hub found [ 1.781727] hub 3-0:1.0: 1 port detected [ 1.791990] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.798598] [drm] No driver support for vblank timestamp query. [ 1.903637] Console: switching to colour frame buffer device 170x48 [ 1.921162] drm drm: fb0: frame buffer device [ 1.950052] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 1.957030] input: gpio-keys as /devices/soc0/gpio-keys/input/input4 [ 1.986453] tps6586x-rtc tps6586x-rtc: setting system clock to 2009-01-01 00:00:00 UTC (1230768000) [ 2.004319] vdd_1v5: disabling [ 2.007380] vdd_1v2: disabling [ 2.010561] ALSA device list: [ 2.013520] #0: NVIDIA Tegra Seaboard [ 2.290973] asix 2-1:1.0 eth0: register 'asix' at usb-c5008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, c0:c1:c0:13:08:60 [ 2.302191] Waiting for root device /dev/mmcblk0p3... [ 74.309970] random: nonblocking pool is initialized

[PYBOOT] [seaboard 01:45]: Timed out waiting for "<type 'str'>":

[PYBOOT] [seaboard 01:46]: got exception: timeout ~$off

[PYBOOT] [seaboard 01:47]: Done. Board snow-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------

[....] Waiting for /dev to be fully populated...[?25l[?1c7[ ok 8[?25h[?0cdone. [....] Activating swap...[?25l[?1c7[ ok 8[?25h[?0cdone. [ 3.109862] EXT4-fs (mmcblk0p3): warning: mounting fs with errors, running e2fsck is recommended [ 3.118213] EXT4-fs (mmcblk0p3): re-mounted. Opts: (null) [....] Cleaning up temporary files... /tmp[?25l[?1c7[ ok 8[?25h[?0c. [....] Activating lvm and md swap...[?25l[?1c7[ ok 8[?25h[?0cdone. [....] Checking file systems...fsck from util-linux 2.20.1 [?25l[?1c7[ ok 8[?25h[?0cdone. [....] Mounting local filesystems...[?25l[?1c7[ ok 8[?25h[?0cdone. [....] Activating swapfile swap...[?25l[?1c7[ ok 8[?25h[?0cdone. [....] Cleaning up temporary files...[?25l[?1c7[ ok 8[?25h[?0c. [....] Setting kernel variables ...[?25l[?1c7[ ok 8[?25h[?0cdone. [ 4.151554] random: dd urandom read with 57 bits of entropy available [....] Configuring network interfaces...Internet Systems Consortium DHCP Client 4.2.2 Copyright 2004-2011 Internet Systems Consortium. All rights reserved. For info, please visit https://www.isc.org/software/dhcp/

Cannot find device "eth0" Bind socket to interface: No such device Failed to bring up eth0. [?25l[?1c7[ ok 8[?25h[?0cdone. [....] Cleaning up temporary files...[?25l[?1c7[ ok 8[?25h[?0c. INIT: Entering runlevel: 2 [info] Using makefile-style concurrent boot in runlevel 2. [....] Starting enhanced syslogd: rsyslogd[?25l[?1c7[ ok 8[?25h[?0c. [....] Starting web server: apache2apache2: Could not reliably determine the server's fully qualified domain name, using 127.0.0.1 for ServerName [?25l[?1c7[ ok 8[?25h[?0c. [....] Starting periodic command scheduler: cron[?25l[?1c7[ ok 8[?25h[?0c. [....] Starting system message bus: dbus[?25l[?1c7[ ok 8[?25h[?0c. [....] Loading cpufreq kernel modules...[?25l[?1c7[ ok 8[?25h[?0cdone (none). [....] CPUFreq Utilities: Setting ondemand CPUFreq governor...CPU0...[?25l[?1c7[ ok 8[?25h[?0cdone. [....] Starting OpenBSD Secure Shell server: sshd[?25l[?1c7[ ok 8[?25h[?0c.

[PYBOOT] [snow 03:11]: Timed out waiting for "<type 'str'>":

[PYBOOT] [snow 03:12]: got exception: timeout ~$off

[PYBOOT] [snow 03:13]: Done. Board snowball-arm-multi_v7_defconfig failure log: -------------------------------------------------

[ 1.996704] can: controller area network core (rev 20120528 abi 9) [ 2.002960] NET: Registered protocol family 29 [ 2.007415] can: raw protocol (rev 20120528) [ 2.011688] can: broadcast manager protocol (rev 20120528 t) [ 2.017364] can: netlink gateway (rev 20130117) max_hops=1 [ 2.023406] Key type dns_resolver registered [ 2.027893] ThumbEE CPU extension supported. [ 2.029113] mmc3: new high speed MMC card at address 0001 [ 2.029602] mmcblk3: mmc3:0001 3.53 GiB [ 2.029785] mmcblk3boot0: mmc3:0001 partition 1 2.00 MiB [ 2.029968] mmcblk3boot1: mmc3:0001 partition 2 2.00 MiB [ 2.030151] mmcblk3rpmb: mmc3:0001 partition 3 128 KiB [ 2.033172] mmcblk3: p1 p2 p3 p4 [ 2.060974] Registering SWP/SWPB emulation handler [ 2.068298] input: gpio_keys as /devices/soc0/gpio_keys/input/input0 [ 2.075073] rtc-pl031 80154000.rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 2.084259] thermal cooling_device0: thermal-cpufreq-0 bind to 0: 0-succeed [ 2.091278] thermal cooling_device0: thermal-cpufreq-0 bind to 1: 0-succeed [ 2.098266] thermal cooling_device0: thermal-cpufreq-0 bind to 2: 0-succeed [ 2.105255] db8500-cpufreq-cooling soc:cpufreq-cooling: Cooling device registered: thermal-cpufreq-0 [ 2.118499] db8500-esram12: disabling [ 2.122375] db8500-esram34: disabling [ 2.126342] V-CSI/DSI: disabling [ 2.129638] mmci-reg: disabling [ 2.133331] uart-pl011 80007000.uart: DMA channel TX dma0chan20 [ 2.139312] uart-pl011 80007000.uart: DMA channel RX dma0chan21 [ 2.145599] Waiting for root device /dev/mmcblk0p4... cu: Got hangup signal Connected. cu: waitpid: No child processes Connected.

Disconnected.

[PYBOOT] [snowball 02:25]: Timed out waiting for "<type 'str'>":

[PYBOOT] [snowball 02:26]: got exception: timeout ~$off

[PYBOOT] [snowball 02:27]: Done. Board snowball-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------

[ 1.857055] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.864624] ledtrig-cpu: registered to indicate activity on CPUs [ 1.870849] usbcore: registered new interface driver usbhid [ 1.876434] usbhid: USB HID core driver [ 1.883697] NET: Registered protocol family 10 [ 1.889190] sit: IPv6 over IPv4 tunneling driver [ 1.894378] NET: Registered protocol family 17 [ 1.898864] can: controller area network core (rev 20120528 abi 9) [ 1.905090] NET: Registered protocol family 29 [ 1.909545] can: raw protocol (rev 20120528) [ 1.913818] can: broadcast manager protocol (rev 20120528 t) [ 1.919464] can: netlink gateway (rev 20130117) max_hops=1 [ 1.925415] Key type dns_resolver registered [ 1.929870] ThumbEE CPU extension supported. [ 1.942535] input: gpio_keys as /devices/soc0/gpio_keys/input/input0 [ 1.949279] rtc-pl031 80154000.rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 1.958374] thermal cooling_device0: thermal-cpufreq-0 bind to 0: 0-succeed [ 1.965362] thermal cooling_device0: thermal-cpufreq-0 bind to 1: 0-succeed [ 1.972351] thermal cooling_device0: thermal-cpufreq-0 bind to 2: 0-succeed [ 1.979339] db8500-cpufreq-cooling soc:cpufreq-cooling: Cooling device registered: thermal-cpufreq-0 [ 1.991088] db8500-esram12: disabling [ 1.994873] db8500-esram34: disabling [ 1.998809] V-CSI/DSI: disabling [ 2.002075] mmci-reg: disabling [ 2.005737] uart-pl011 80007000.uart: DMA channel TX dma0chan20 [ 2.011718] uart-pl011 80007000.uart: DMA channel RX dma0chan21 [ 2.018951] Waiting for root device /dev/mmcblk0p4... [ 2.053771] mmc3: new high speed MMC card at address 0001 [ 2.059600] mmcblk3: mmc3:0001 3.53 GiB [ 2.063751] mmcblk3boot0: mmc3:0001 partition 1 2.00 MiB [ 2.069335] mmcblk3boot1: mmc3:0001 partition 2 2.00 MiB [ 2.074829] mmcblk3rpmb: mmc3:0001 partition 3 128 KiB [ 2.081146] mmcblk3: p1 p2 p3 p4

[PYBOOT] [snowball 01:56]: Timed out waiting for "<type 'str'>":

[PYBOOT] [snowball 01:57]: got exception: timeout ~$off

[PYBOOT] [snowball 01:58]: Done. Board snowball-arm-u8500_defconfig failure log: -------------------------------------------------

[ 2.663818] snd-soc-mop500 snd-soc-mop500.0: ab8500-codec-dai.0 <-> ux500-msp-i2s.1 mapping ok [ 2.673736] ux500-msp-i2s ux500-msp-i2s.3: Failed to get DMA channel capabilities, falling back to period counting: -6 [ 2.684448] snd-soc-mop500 snd-soc-mop500.0: ab8500-codec-dai.1 <-> ux500-msp-i2s.3 mapping ok [ 2.708129] NET: Registered protocol family 10 [ 2.714263] sit: IPv6 over IPv4 tunneling driver [ 2.720520] NET: Registered protocol family 17 [ 2.725067] NET: Registered protocol family 35 [ 2.729644] NET: Registered protocol family 37 [ 2.734252] Registering SWP/SWPB emulation handler [ 2.740631] coresight-etm3x 801ae000.ptm: PTM 1.0 initialized [ 2.746795] coresight-etm3x 801af000.ptm: PTM 1.0 initialized [ 2.753479] input: gpio_keys as /devices/soc0/gpio_keys/input/input1 [ 2.760559] ab8500-rtc ab8500-rtc.0: setting system clock to 2000-04-05 20:54:06 UTC (954968046) [ 2.769744] thermal cooling_device0: thermal-cpufreq-0 bind to 0: 0-succeed [ 2.776885] thermal cooling_device0: thermal-cpufreq-0 bind to 1: 0-succeed [ 2.783905] thermal cooling_device0: thermal-cpufreq-0 bind to 2: 0-succeed [ 2.790924] db8500-cpufreq-cooling soc:cpufreq-cooling: Cooling device registered: thermal-cpufreq-0 [ 2.804565] db8500-esram12: disabling [ 2.808319] db8500-esram34: disabling [ 2.812286] V-CSI/DSI: disabling [ 2.815551] mmci-reg: disabling [ 2.818847] ALSA device list: [ 2.821899] #0: MOP500-card [ 2.825256] uart-pl011 80007000.uart: DMA channel TX dma0chan24 [ 2.831237] uart-pl011 80007000.uart: DMA channel RX dma0chan25 [ 2.837432] Waiting for root device /dev/mmcblk0p4... [ 68.440216] random: nonblocking pool is initialized Connected. cu: Got hangup signal cu: waitpid: No child processes Connected.

Disconnected.

[PYBOOT] [snowball 01:53]: Timed out waiting for "<type 'str'>":

[PYBOOT] [snowball 01:54]: got exception: timeout ~$off

[PYBOOT] [snowball 01:55]: Done. Board wandboard-arm-imx_v6_v7_defconfig failure log: -------------------------------------------------

[ 20.137925] mmcblk0: error -110 sending status command, retrying [ 20.146357] mmcblk0: error -110 sending status command, aborting [ 20.157436] mmcblk0: error -110 sending status command, retrying [ 20.165924] mmcblk0: error -110 sending status command, retrying [ 20.174347] mmcblk0: error -110 sending status command, aborting INIT: cannot execute "/sbin/getty"INIT: cannot execute "/sbin/getty"INIT: cannot execute "/sbin/getty" INIT: cannot execute "/sbin/getty"cannot execute "/sbin/getty"

INIT: Id "3" respawning too fast: disabled for 5 minutes INIT: Id "4" respawning too fast: disabled[ 20.224689] mmcblk0: error -110 sending status command, retrying for 5 minutes [ 20.233463] mmcblk0: error -110 sending status command, retrying [ 20.241929] mmcblk0: error -110 sending status command, aborting [ 20.253020] mmcblk0: error -110 sending status command, retrying [ 20.261513] mmcblk0: error -110 sending status command, retrying [ 20.269973] mmcblk0: error -110 sending status command, aborting INIT: cannot execute "/sbin/getty" I[ 20.281136] mmcblk0: error -110 sending status command, retrying NIT: Id "2" respawning too fast: [ 20.289963] mmcblk0: error -110 sending status command, retrying disabled for 5 minutes [ 20.298843] mmcblk0: error -110 sending status command, aborting INIT: cannot execute "/sbin/getty"cannot execute "/sbin/getty"

INIT: Id "6" respawning too fast: disabled for 5 minutes [ 20.402468] mmcblk0: error -110 sending status command, retrying [ 20.410940] mmcblk0: error -110 sending status command, retrying [ 20.419405] mmcblk0: error -110 sending status command, aborting INIT: cannot execute "/sbin/getty" INIT: Id "5" respawning too fast: disabled for 5 minutes INIT: no more processes left in this runlevel [ 52.765764] random: nonblocking pool is initialized

[PYBOOT] [wandboard 02:55]: Timed out waiting for "<type 'str'>":

[PYBOOT] [wandboard 02:56]: got exception: timeout ~$off

[PYBOOT] [wandboard 02:57]: Done.