Full logs are available at http://arm-soc.lixom.net/bootlogs/mainline/v4.5-rc1-179-gad0b40fa/
Failed boards:
arndale arm-multi_v7_nosmp_defconfig : FAILED 20:53.71 colombus arm-multi_v7_nosmp_defconfig : FAILED 3:22.10 cubox arm-multi_v7_defconfig : FAILED 2:00.96 cubox arm-mvebu_v7_defconfig : FAILED 0:40.23 cubox arm-multi_v7_nosmp_defconfig : FAILED 2:09.39 snow arm-multi_v7_nosmp_defconfig : FAILED 0:46.73 wandboard arm-imx_v6_v7_defconfig : FAILED 2:59.62
Successful boards:
apc arm-vt8500_v6_v7_defconfig : passed 1:13.92 arndale arm-exynos_defconfig : passed 1:28.05 arndale arm-multi_v7_defconfig : passed 1:31.56 arndale arm-multi_lpae_defconfig : passed 1:25.43 bbb arm-omap2plus_defconfig : passed 1:44.35 bbb arm-multi_v7_defconfig : passed 1:25.79 bbb arm-multi_v7_nosmp_defconfig : passed 1:32.81 beaver arm-tegra_defconfig : warnings 1:44.72 beaver arm-multi_v7_defconfig : warnings 1:50.38 beaver arm-multi_v7_nosmp_defconfig : warnings 2:29.99 capri arm-bcm_defconfig : passed 0:54.42 capri arm-multi_v7_defconfig : passed 0:53.52 capri arm-multi_v7_nosmp_defconfig : warnings 1:02.30 chitra powerpc-pasemi_defconfig : passed 2:04.61 chitra powerpc-ppc64_defconfig : passed 2:17.48 colibri-vf61 arm-imx_v6_v7_defconfig : passed 1:33.84 colibri-vf61 arm-multi_v7_defconfig : passed 1:24.97 colibri-vf61 arm-multi_v7_nosmp_defconfig : passed 1:32.29 colombus arm-sunxi_defconfig : passed 2:43.37 colombus arm-multi_v7_defconfig : passed 2:49.58 colombus arm-multi_lpae_defconfig : passed 2:35.96 cosmic arm-imx_v6_v7_defconfig : passed 2:30.10 cosmic arm-multi_v7_defconfig : passed 2:23.92 cosmic arm-multi_v7_nosmp_defconfig : passed 3:05.21 cubie arm-sunxi_defconfig : passed 0:51.87 cubie arm-multi_v7_defconfig : warnings 0:56.43 cubie arm-multi_v7_nosmp_defconfig : warnings 0:59.31 cubie2 arm-sunxi_defconfig : passed 0:59.23 cubie2 arm-multi_v7_defconfig : warnings 0:58.78 cubie2 arm-multi_lpae_defconfig : warnings 1:01.06 cubie2 arm-multi_v7_nosmp_defconfig : warnings 0:56.27 dalmore arm-tegra_defconfig : warnings 1:24.74 dalmore arm-multi_v7_defconfig : warnings 1:35.60 dalmore arm-multi_lpae_defconfig : warnings 1:29.57 dalmore arm-multi_v7_nosmp_defconfig : warnings 1:49.64 hummingboard arm-imx_v6_v7_defconfig : passed 1:47.31 hummingboard arm-multi_v7_defconfig : passed 1:38.96 hummingboard arm-multi_v7_nosmp_defconfig : warnings 1:11.54 jetsontk1 arm-tegra_defconfig : warnings 1:33.12 jetsontk1 arm-multi_v7_defconfig : warnings 1:46.27 jetsontk1 arm-multi_lpae_defconfig : warnings 1:56.51 jetsontk1 arm-multi_v7_nosmp_defconfig : warnings 1:40.34 minnowmax x86-minnowmax_defconfig : passed 1:22.43 odroidu3 arm-exynos_defconfig : warnings 2:14.78 omap5uevm arm-omap2plus_defconfig : passed 1:07.71 omap5uevm arm-multi_v7_defconfig : passed 2:00.02 omap5uevm arm-multi_lpae_defconfig : passed 2:10.01 omap5uevm arm-multi_v7_nosmp_defconfig : warnings 1:53.85 pandaes arm-omap2plus_defconfig : passed 1:36.57 pandaes arm-multi_v7_defconfig : passed 1:38.37 pandaes arm-multi_v7_nosmp_defconfig : warnings 1:53.74 parallella arm-multi_v7_defconfig : passed 2:52.35 parallella arm-multi_v7_nosmp_defconfig : warnings 2:36.94 pi arm-exynos_defconfig : passed 2:15.23 pi arm-multi_v7_defconfig : passed 2:03.29 pi arm-multi_lpae_defconfig : passed 2:54.57 pi arm-multi_v7_nosmp_defconfig : warnings 1:46.55 pit arm-exynos_defconfig : passed 2:14.80 pit arm-multi_v7_defconfig : passed 2:04.27 pit arm-multi_lpae_defconfig : passed 2:03.81 pit arm-multi_v7_nosmp_defconfig : warnings 1:46.04 seaboard arm-tegra_defconfig : passed 1:01.28 seaboard arm-multi_v7_defconfig : passed 1:03.80 seaboard arm-multi_v7_nosmp_defconfig : warnings 1:02.03 seattle arm64-defconfig : warnings 2:15.89 snow arm-exynos_defconfig : passed 2:28.39 snow arm-multi_v7_defconfig : passed 2:32.37 snow arm-multi_lpae_defconfig : passed 1:58.02 snowball arm-u8500_defconfig : passed 1:13.37 snowball arm-multi_v7_defconfig : passed 1:40.00 snowball arm-multi_v7_nosmp_defconfig : warnings 1:27.51 socfpga arm-socfpga_defconfig : passed 1:12.10 socfpga arm-multi_v7_defconfig : passed 1:15.58 socfpga arm-multi_v7_nosmp_defconfig : warnings 1:20.74 trimslice arm-tegra_defconfig : passed 2:48.39 trimslice arm-multi_v7_defconfig : passed 1:37.95 trimslice arm-multi_v7_nosmp_defconfig : warnings 2:40.15 wandboard arm-multi_v7_defconfig : passed 1:19.33 wandboard arm-multi_v7_nosmp_defconfig : warnings 1:29.75
Offline boards:
rk3288evb arm-multi_v7_defconfig : OFFLINE 0:51.14 rk3288evb arm-multi_lpae_defconfig : OFFLINE 0:46.03 rk3288evb arm-multi_v7_nosmp_defconfig : OFFLINE 1:05.67 sama5 arm-sama5_defconfig : OFFLINE 2:27.98
Board legend is available at http://arm-soc.lixom.net/boards.html
Last entries of failed logs below:
========================================================================
Board arndale-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
[ 1.596382] usbcore: registered new interface driver cdc_ncm [ 1.602676] usb_phy_generic.0.auto supply vcc not found, using dummy regulator [ 1.609306] usb_phy_generic.1.auto supply vcc not found, using dummy regulator [ 1.616412] exynos-dwc3 usb@12000000: no suspend clk specified [ 1.622207] usb@12000000 supply vdd33 not found, using dummy regulator [ 1.628732] usb@12000000 supply vdd10 not found, using dummy regulator [ 1.837153] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.842217] ehci-pci: EHCI PCI platform driver [ 1.846665] ehci-platform: EHCI generic platform driver [ 1.851988] ehci-omap: OMAP-EHCI Host Controller driver [ 1.857137] ehci-orion: EHCI orion driver [ 1.861130] SPEAr-ehci: EHCI SPEAr driver [ 1.865128] ehci-st: EHCI STMicroelectronics driver [ 1.869988] ehci-exynos: EHCI EXYNOS driver [ 1.874233] ehci-atmel: EHCI Atmel driver [ 1.878146] tegra-ehci: Tegra EHCI driver [ 1.882159] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.888224] ohci-pci: OHCI PCI platform driver [ 1.892671] ohci-platform: OHCI generic platform driver [ 1.897959] ohci-omap3: OHCI OMAP3 driver [ 1.901928] SPEAr-ohci: OHCI SPEAr driver [ 1.905923] ohci-st: OHCI STMicroelectronics driver [ 1.910784] ohci-atmel: OHCI Atmel driver [ 1.915086] usbcore: registered new interface driver usb-storage [ 1.921664] mousedev: PS/2 mouse device common for all mice [ 1.928461] i2c /dev entries driver [ 1.934607] 10060000.tmu supply vtmu not found, using dummy regulator [ 1.959659] sdhci: Secure Digital Host Controller Interface driver [ 1.964358] sdhci: Copyright(c) Pierre Ossman [ 1.969353] Synopsys Designware Multimedia Card Interface Driver [ 1.974989] dwmmc_exynos 12200000.mmc: IDMAC supports 32-bit address mode. [ 1.981575] dwmmc_exynos 12200000.mmc: Using internal DMA controller. [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.5.0-rc1-00179-gad0b40fa (build@brutus) (gcc version 4.9.2 (GCC) ) #1 Fri Jan 29 16:25:59 PST 2016 [ 0.000000] CPU: ARMv7 Processor [410fc0f4] revision 4 (ARMv7), cr=10c53c7d [ 0.000000] CPU: div instructions available: patch [PYBOOT] [arndale 20:47]: got exception: maximum recursion depth exceeded ~$off
[PYBOOT] [arndale 20:48]: Done.
========================================================================
Board colombus-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
[....] Waiting for /dev to be fully populated...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Activating swap...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [ 44.246972] EXT4-fs (mmcblk0p1): warning: mounting fs with errors, running e2fsck is recommended [ 44.261343] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [....] Cleaning up temporary files... /tmp[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] Activating lvm and md swap...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Checking file systems...fsck from util-linux 2.20.1 [?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Mounting local filesystems...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Activating swapfile swap...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Cleaning up temporary files...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] Setting kernel variables ...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [ 87.884013] random: dd urandom read with 60 bits of entropy available [....] Configuring network interfaces...Internet Systems Consortium DHCP Client 4.2.2 Copyright 2004-2011 Internet Systems Consortium. All rights reserved. For info, please visit https://www.isc.org/software/dhcp/
[ 92.323704] eth0: device MAC address aa:52:06:14:89:17 [ 92.351012] RX IPC Checksum Offload disabled [ 92.355644] No MAC Management Counters available [ 92.361423] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready Listening on LPF/eth0/aa:52:06:14:89:17 Sending on LPF/eth0/aa:52:06:14:89:17 Sending on Socket/fallback DHCPREQUEST on eth0 to 255.255.255.255 port 67 DHCPREQUEST on eth0 to 255.255.255.255 port 67 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 5 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 7 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 8 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 10 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 12 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 15
[PYBOOT] [colombus 03:19]: Timed out waiting for "<type 'str'>":
[PYBOOT] [colombus 03:20]: got exception: timeout ~$off
[PYBOOT] [colombus 03:21]: Done.
========================================================================
Board cubox-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 68.164838] [<c029d264>] (hrtimer_interrupt) from [<c08b62dc>] (orion_clkevt_irq_handler+0x14/0x1c) [ 68.173848] [<c08b62dc>] (orion_clkevt_irq_handler) from [<c028c71c>] (handle_irq_event_percpu+0x78/0x130) [ 68.183462] [<c028c71c>] (handle_irq_event_percpu) from [<c028c818>] (handle_irq_event+0x44/0x68) [ 68.192293] [<c028c818>] (handle_irq_event) from [<c028fb3c>] (handle_edge_irq+0xe8/0x1ac) [ 68.200518] [<c028fb3c>] (handle_edge_irq) from [<c028bdfc>] (generic_handle_irq+0x24/0x34) [ 68.208830] [<c028bdfc>] (generic_handle_irq) from [<c04ba6f8>] (orion_bridge_irq_handler+0x50/0x5c) [ 68.217919] [<c04ba6f8>] (orion_bridge_irq_handler) from [<c028bdfc>] (generic_handle_irq+0x24/0x34) [ 68.227008] [<c028bdfc>] (generic_handle_irq) from [<c028c0ac>] (__handle_domain_irq+0x5c/0xb4) [ 68.235664] [<c028c0ac>] (__handle_domain_irq) from [<c020a5b8>] (orion_handle_irq+0x70/0x90) [ 68.244149] [<c020a5b8>] (orion_handle_irq) from [<c0215554>] (__irq_svc+0x54/0x70) [ 68.251764] Exception stack(0xee855d10 to 0xee855d58) [ 68.256796] 5d00: eec72a68 00000000 0000ee81 0000e4c0 [ 68.264938] 5d20: eec72a64 00000000 ee850000 eec72a68 00000002 00000000 c0b68274 00000001 [ 68.273074] 5d40: 00000000 ee855d60 c0a29c2c c0a2b77c 20000013 ffffffff [ 68.279663] [<c0215554>] (__irq_svc) from [<c0a2b77c>] (_raw_spin_lock+0x28/0x40) [ 68.287118] [<c0a2b77c>] (_raw_spin_lock) from [<c0a29c2c>] (__mutex_lock_slowpath+0x44/0x150) [ 68.295698] [<c0a29c2c>] (__mutex_lock_slowpath) from [<c0a29d80>] (mutex_lock+0x48/0x4c) [ 68.303844] [<c0a29d80>] (mutex_lock) from [<c0726328>] (phy_probe+0x50/0xd4) [ 68.310945] [<c0726328>] (phy_probe) from [<c07269f4>] (phy_attach_direct+0x9c/0x14c) [ 68.318739] [<c07269f4>] (phy_attach_direct) from [<c0726b64>] (phy_connect_direct+0x14/0x4c) [ 68.327224] [<c0726b64>] (phy_connect_direct) from [<c08cc4f4>] (of_phy_connect+0x38/0x5c) [ 68.335452] [<c08cc4f4>] (of_phy_connect) from [<c076914c>] (mv643xx_eth_probe+0x224/0x700) [ 68.343775] [<c076914c>] (mv643xx_eth_probe) from [<c066bc8c>] (platform_drv_probe+0x50/0xac) [ 68.352264] [<c066bc8c>] (platform_drv_probe) from [<c066a3d8>] (driver_probe_device+0x214/0x2c0) [ 68.361102] [<c066a3d8>] (driver_probe_device) from [<c066a510>] (__driver_attach+0x8c/0x90) [ 68.369508] [<c066a510>] (__driver_attach) from [<c066872c>] (bus_for_each_dev+0x6c/0xa0) [ 68.377647] [<c066872c>] (bus_for_each_dev) from [<c06699d0>] (bus_add_driver+0x1a0/0x218) [ 68.385873] [<c06699d0>] (bus_add_driver) from [<c066ad2c>] (driver_register+0x78/0xf8) [ 68.393840] [<c066ad2c>] (driver_register) from [<c066bd80>] (__platform_register_drivers+0x64/0xe8) [ 68.402938] [<c066bd80>] (__platform_register_drivers) from [<c020ad74>] (do_one_initcall+0x90/0x1d8) [ 68.412124] [<c020ad74>] (do_one_initcall) from [<c0e81dfc>] (kernel_init_freeable+0x158/0x1f8) [ 68.420787] [<c0e81dfc>] (kernel_init_freeable) from [<c0a26ba0>] (kernel_init+0x8/0xec) [ 68.428848] [<c0a26ba0>] (kernel_init) from [<c0210db8>] (ret_from_fork+0x14/0x3c)
[PYBOOT] [cubox 01:58]: Timed out waiting for "<type 'str'>":
[PYBOOT] [cubox 01:59]: got exception: timeout ~$off
[PYBOOT] [cubox 02:00]: Done.
========================================================================
Board cubox-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
[ 0.111172] dove-pinctrl f10d0200.pin-ctrl: [Firmware Bug]: Missing pinctrl regs in DTB. Please update your firmware. [ 0.111807] dove-pinctrl f10d0200.pin-ctrl: registered pinctrl driver [ 0.115497] irq: Cannot allocate irq_descs @ IRQ40, assuming pre-allocated [ 0.115827] irq: Cannot allocate irq_descs @ IRQ72, assuming pre-allocated [ 0.119080] mv_xor f1060800.dma-engine: Marvell shared XOR driver [ 0.141518] mv_xor f1060800.dma-engine: Marvell XOR (Registers Mode): ( xor cpy intr ) [ 0.141696] mv_xor f1060900.dma-engine: Marvell shared XOR driver [ 0.166487] mv_xor f1060900.dma-engine: Marvell XOR (Registers Mode): ( xor cpy intr ) [ 0.219085] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 0.221459] console [ttyS0] disabled [ 0.221505] f1012000.serial: ttyS0 at MMIO 0xf1012000 (irq = 21, base_baud = 10416666) is a 16550A [ 0.835150] console [ttyS0] enabled [ 0.839355] SuperH (H)SCI(F) driver initialized [ 0.844594] msm_serial: driver initialized [ 0.848826] STMicroelectronics ASC driver initialized [ 0.855161] [drm] Initialized drm 1.1.0 20060810 [ 0.872265] brd: module loaded [ 0.880384] loop: module loaded [ 0.885512] sata_mv f10a0000.sata-host: version 1.28 [ 0.890635] sata_mv f10a0000.sata-host: slots 32 ports 1 [ 0.897425] scsi host0: sata_mv [ 0.900849] ata1: SATA max UDMA/133 irq 30 [ 0.907531] m25p80 spi0.0: found n25q032, expected w25q32 [ 0.912937] m25p80 spi0.0: n25q032 (4096 Kbytes) [ 0.921378] libphy: Fixed MDIO Bus: probed [ 0.926168] CAN device driver interface [ 0.931435] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.3.0-k [ 0.938373] igb: Copyright (c) 2007-2014 Intel Corporation. [ 0.944243] libphy: orion_mdio_bus: probed [ 0.948352] mdio_bus f1072004.mdio-bu:01: mdio_device_register [ 0.954441] mv643xx_eth: MV-643xx 10/100/1000 ethernet driver version 1.4 [ 1.227021] ata1: SATA link down (SStatus 0 SControl F300) [ 77.121037] random: nonblocking pool is initialized
[PYBOOT] [cubox 02:06]: Timed out waiting for "<type 'str'>":
[PYBOOT] [cubox 02:07]: got exception: timeout ~$off
[PYBOOT] [cubox 02:08]: Done.
========================================================================
Board cubox-arm-mvebu_v7_defconfig failure log: -------------------------------------------------
[ 1.178032] 9e80: 00000000 c07844e0 c0274eb8 c0273160 ef01585c ef16ccb4 c07844e0 ef2ecf80 [ 1.186172] 9ea0: 00000000 c0274404 c0684b54 c02760b4 c07844e0 c07844e0 00000002 c02760b4 [ 1.194311] 9ec0: c0276634 c0275760 c07844cc 00000000 00000002 c02767b4 c058c618 c058c614 [ 1.202449] 9ee0: c072b1cc c075e090 c075e090 ef2b7540 c072b1cc 00000000 000000ba c074583c [ 1.210589] 9f00: 00000000 c0009874 c0562098 00000011 00000000 00007bc0 cccccc00 c012b830 [ 1.218727] 9f20: 00000000 c0761324 0000039d c06e1b88 c0575928 c003e530 cccccccd 00000000 [ 1.226865] 9f40: c0694d20 00000000 00000006 00000006 c076130c 00000000 c0752cd4 00000006 [ 1.235005] 9f60: c0745834 c0797bc0 c0797bc0 c074583c 00000000 c070edec 00000006 00000006 [ 1.243142] 9f80: 00000000 c070e598 00000000 c0558ca8 00000000 00000000 00000000 00000000 [ 1.251281] 9fa0: 00000000 c0558cb0 00000000 c000f7b8 00000000 00000000 00000000 00000000 [ 1.259420] 9fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 1.267560] 9fe0: 00000000 00000000 00000000 00000000 00000013 00000000 00000000 00000000 [ 1.275708] [<c055bf5c>] (__mutex_lock_slowpath) from [<c055c084>] (mutex_lock+0x48/0x4c) [ 1.283848] [<c055c084>] (mutex_lock) from [<c02effa8>] (phy_probe+0x50/0xd4) [ 1.290949] [<c02effa8>] (phy_probe) from [<c02f0674>] (phy_attach_direct+0x9c/0x14c) [ 1.298742] [<c02f0674>] (phy_attach_direct) from [<c02f07e4>] (phy_connect_direct+0x14/0x4c) [ 1.307234] [<c02f07e4>] (phy_connect_direct) from [<c03ccbc8>] (of_phy_connect+0x38/0x5c) [ 1.315467] [<c03ccbc8>] (of_phy_connect) from [<c02f64e8>] (mv643xx_eth_probe+0x224/0x700) [ 1.323789] [<c02f64e8>] (mv643xx_eth_probe) from [<c02766c0>] (platform_drv_probe+0x50/0xac) [ 1.332276] [<c02766c0>] (platform_drv_probe) from [<c0274e0c>] (driver_probe_device+0x214/0x2c0) [ 1.341114] [<c0274e0c>] (driver_probe_device) from [<c0274f44>] (__driver_attach+0x8c/0x90) [ 1.349520] [<c0274f44>] (__driver_attach) from [<c0273160>] (bus_for_each_dev+0x6c/0xa0) [ 1.357659] [<c0273160>] (bus_for_each_dev) from [<c0274404>] (bus_add_driver+0x1a0/0x218) [ 1.365883] [<c0274404>] (bus_add_driver) from [<c0275760>] (driver_register+0x78/0xf8) [ 1.373851] [<c0275760>] (driver_register) from [<c02767b4>] (__platform_register_drivers+0x64/0xe8) [ 1.382942] [<c02767b4>] (__platform_register_drivers) from [<c0009874>] (do_one_initcall+0x90/0x1d8) [ 1.392125] [<c0009874>] (do_one_initcall) from [<c070edec>] (kernel_init_freeable+0x154/0x1f4) [ 1.400797] [<c070edec>] (kernel_init_freeable) from [<c0558cb0>] (kernel_init+0x8/0xec) [ 1.408855] [<c0558cb0>] (kernel_init) from [<c000f7b8>] (ret_from_fork+0x14/0x3c) [ 1.416393] Code: e58d9004 e3e05000 e58d3008 e3a08002 (e5832000) [ 1.422515] ---[ end trace 05a5c38e3324428e ]--- [ 1.427135] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b [ 1.427135] [ 1.436227] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b [ 1.436227]
[PYBOOT] [cubox 00:37]: got exception: panic ~$off
[PYBOOT] [cubox 00:38]: Done.
========================================================================
Board snow-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
[ 1.861863] dwmmc_exynos 12230000.mmc: Version ID is 241a [ 1.867242] dwmmc_exynos 12230000.mmc: DW MMC controller at irq 108,32 bit host data width,128 deep fifo [ 1.876809] dwmmc_exynos 12230000.mmc: allocated mmc-pwrseq [ 1.896202] mmc0: MAN_BKOPS_EN bit is not set [ 1.901518] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 52000000Hz, actual 50000000HZ div = 0) [ 1.910634] dwmmc_exynos 12230000.mmc: 1 slots initialized [ 1.916537] mmc_host mmc0: Bus speed (slot 0) = 100000000Hz (slot req 52000000Hz, actual 50000000HZ div = 1) [ 1.925528] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 1.936339] mmc0: new DDR MMC card at address 0001 [ 1.939839] mmcblk0: mmc0:0001 SEM16G 14.7 GiB [ 1.944244] mmcblk0boot0: mmc0:0001 SEM16G partition 1 4.00 MiB [ 1.950147] mmcblk0boot1: mmc0:0001 SEM16G partition 2 4.00 MiB [ 1.956074] mmcblk0rpmb: mmc0:0001 SEM16G partition 3 4.00 MiB [ 1.961995] max77686-rtc max77686-rtc: setting system clock to 2000-01-01 01:00:34 UTC (946688434) [ 1.974059] vbat-supply: disabling [ 1.979364] mmcblk0: p2 p3 [ 1.983614] EXT4-fs (mmcblk0p3): couldn't mount as ext3 due to feature incompatibilities [ 1.990475] EXT4-fs (mmcblk0p3): couldn't mount as ext2 due to feature incompatibilities [ 2.005670] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: (null) [ 2.012290] VFS: Mounted root (ext4 filesystem) readonly on device 179:3. [ 2.019976] devtmpfs: mounted [ 2.022515] Freeing unused kernel memory: 1008K (c0e14000 - c0f10000)
[PYBOOT] [snow 00:43]: kernel: finished booting, starting userspace. [ 2.035835] mmc_host mmc2: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) [ 2.047729] mmc2: new high speed SDIO card at address 0001 [ 2.060987] Kernel panic - not syncing: Attempted to kill the idle task! [ 2.066204] CPU: 0 PID: 0 Comm: swapper Tainted: G W 4.5.0-rc1-00179-gad0b40fa #1 [ 2.074794] Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) [ 2.080883] [<c0217980>] (unwind_backtrace) from [<c02144f4>] (show_stack+0x10/0x14) [ 2.088601] [<c02144f4>] (show_stack) from [<c02a3c20>] (panic+0xc4/0x24c) [ 2.095457] [<c02a3c20>] (panic) from [<c0242a88>] (do_exit+0x74c/0x934) [ 2.102140] [<c0242a88>] (do_exit) from [<c02436e8>] (do_group_exit+0x0/0xa4) [ 2.109258] [<c02436e8>] (do_group_exit) from [<c0210b20>] (ret_fast_syscall+0x0/0x3c) [ 2.117156] ---[ end Kernel panic - not syncing: Attempted to kill the idle task!
[PYBOOT] [snow 00:44]: got exception: panic ~$off
[PYBOOT] [snow 00:46]: Done.
========================================================================
Board wandboard-arm-imx_v6_v7_defconfig failure log: -------------------------------------------------
INIT: Id "2" respawning too fast[ 19.956540] mmcblk0: error -110 sending status command, retrying : disabled for 5 minutes [ 19.965171] mmcblk0: error -110 sending status command, retrying [ 19.973614] mmcblk0: error -110 sending status command, aborting [ 19.984712] mmcblk0: error -110 sending status command, retrying [ 19.993137] mmcblk0: error -110 sending status command, retrying [ 20.001578] mmcblk0: error -110 sending status command, aborting [ 20.012572] mmcblk0: error -110 sending status command, retrying [ 20.021015] mmcblk0: error -110 sending status command, retrying [ 20.029450] mmcblk0: error -110 sending status command, aborting [ 20.040483] mmcblk0: error -110 sending status command, retrying [ 20.048922] mmcblk0: error -110 sending status command, retrying [ 20.057365] mmcblk0: error -110 sending status command, aborting INIT: INIT: cannot execute "/sbin/gett[ 20.069338] mmcblk0: error -110 sending status command, retrying y"cannot execute "/sbin/getty" [ 20.078226] mmcblk0: error -110 sending status command, retrying INIT: Id "1" respawning too fast[ 20.087087] mmcblk0: error -110 sending status command, aborting : disabled for 5 minutes INIT: cannot execute "/sbin/getty" INIT: cannot execute "/sbin/getty" INIT: cannot execute[ 20.103916] mmcblk0: error -110 sending status command, retrying "/sbin/getty" INIT: cannot ex[ 20.112798] mmcblk0: error -110 sending status command, retrying ecute "/sbin/getty" INIT: Id "[ 20.121658] mmcblk0: error -110 sending status command, aborting 4" respawning too fast: disabled for 5 minutes INIT: Id "5" respawning too fast: disabled for 5 minutes INIT: Id "S1" respawning too fast: disabled for 5 minutes INIT: Id "6" respawning too fast: disabled for 5 minutes INIT: cannot execute "/sbin/getty" INIT: Id "3" respawning too fast: disabled for 5 minutes INIT: no more processes left in this runlevel [ 141.024885] random: nonblocking pool is initialized
[PYBOOT] [wandboard 02:57]: Timed out waiting for "<type 'str'>":
[PYBOOT] [wandboard 02:58]: got exception: timeout ~$off
[PYBOOT] [wandboard 02:59]: Done.