Full logs are available at http://arm-soc.lixom.net/bootlogs/mainline/v4.6-rc6-205-g01ec716/
Failed boards:
arndale arm-multi_v7_nosmp_defconfig : FAILED 18:36.45 bbb arm-omap2plus_defconfig : FAILED 1:54.48 bbb arm-multi_v7_defconfig : FAILED 1:55.87 bbb arm-multi_v7_nosmp_defconfig : FAILED 2:18.66 beagleboard-x15 arm-omap2plus_defconfig : FAILED 1:44.38 beagleboard-x15 arm-multi_v7_defconfig : FAILED 1:44.01 beagleboard-x15 arm-multi_lpae_defconfig : FAILED 1:54.98 beagleboard-x15 arm-multi_v7_nosmp_defconfig : FAILED 2:05.04 chitra powerpc-pasemi_defconfig : BUILD FAILED colombus arm-multi_v7_nosmp_defconfig : FAILED 3:21.08 cosmic arm-imx_v6_v7_defconfig : FAILED 2:01.22 cosmic arm-multi_v7_defconfig : FAILED 2:11.98 cosmic arm-multi_v7_nosmp_defconfig : FAILED 2:05.47 dalmore arm-tegra_defconfig : FAILED 1:48.52 dalmore arm-multi_v7_defconfig : FAILED 1:59.48 dalmore arm-multi_lpae_defconfig : FAILED 1:53.33 dalmore arm-multi_v7_nosmp_defconfig : FAILED 1:54.34 minnowmax minnowmax_defconfig : NO BUILD odroidu3 arm-exynos_defconfig : FAILED 1:55.56 omap5uevm arm-multi_v7_defconfig : FAILED 2:10.16 omap5uevm arm-multi_lpae_defconfig : FAILED 2:07.21 omap5uevm arm-multi_v7_nosmp_defconfig : FAILED 1:01.14 seaboard arm-tegra_defconfig : FAILED 1:48.75 seaboard arm-multi_v7_defconfig : FAILED 2:01.07 seaboard arm-multi_v7_nosmp_defconfig : FAILED 1:51.48 snow arm-multi_v7_nosmp_defconfig : FAILED 3:14.03 snowball arm-u8500_defconfig : FAILED 1:57.63 snowball arm-multi_v7_defconfig : FAILED 2:27.13 snowball arm-multi_v7_nosmp_defconfig : FAILED 1:59.32 wandboard arm-imx_v6_v7_defconfig : FAILED 2:58.18
Successful boards:
apc arm-vt8500_v6_v7_defconfig : passed 1:11.64 arndale arm-exynos_defconfig : passed 1:31.55 arndale arm-multi_v7_defconfig : passed 1:25.76 arndale arm-multi_lpae_defconfig : passed 1:22.30 capri arm-bcm_defconfig : passed 0:46.02 capri arm-multi_v7_defconfig : passed 1:03.14 capri arm-multi_v7_nosmp_defconfig : warnings 1:11.42 chitra powerpc-ppc64_defconfig : passed 2:19.39 colombus arm-sunxi_defconfig : passed 2:23.93 colombus arm-multi_v7_defconfig : passed 2:41.77 colombus arm-multi_lpae_defconfig : passed 2:38.76 cubie arm-sunxi_defconfig : passed 0:54.10 cubie arm-multi_v7_defconfig : passed 0:52.10 cubie arm-multi_v7_nosmp_defconfig : passed 1:04.22 cubie2 arm-sunxi_defconfig : passed 0:49.41 cubie2 arm-multi_v7_defconfig : passed 1:00.59 cubie2 arm-multi_lpae_defconfig : passed 1:18.40 cubie2 arm-multi_v7_nosmp_defconfig : warnings 1:16.82 cubox arm-multi_v7_defconfig : passed 1:10.14 cubox arm-mvebu_v7_defconfig : passed 1:21.64 cubox arm-multi_v7_nosmp_defconfig : passed 1:23.79 hummingboard arm-imx_v6_v7_defconfig : passed 1:41.57 hummingboard arm-multi_v7_defconfig : passed 1:23.88 hummingboard arm-multi_v7_nosmp_defconfig : warnings 1:12.98 jetsontk1 arm-tegra_defconfig : passed 1:31.79 jetsontk1 arm-multi_v7_defconfig : passed 1:36.88 jetsontk1 arm-multi_lpae_defconfig : passed 1:52.55 jetsontk1 arm-multi_v7_nosmp_defconfig : warnings 1:41.58 omap5uevm arm-omap2plus_defconfig : passed 1:04.54 pandaes arm-omap2plus_defconfig : warnings 1:40.62 pandaes arm-multi_v7_defconfig : passed 1:40.77 pandaes arm-multi_v7_nosmp_defconfig : warnings 2:08.17 pi arm-exynos_defconfig : passed 2:13.55 pi arm-multi_v7_defconfig : passed 2:22.32 pi arm-multi_lpae_defconfig : passed 2:42.42 pi arm-multi_v7_nosmp_defconfig : warnings 2:13.13 pit arm-exynos_defconfig : passed 2:13.25 pit arm-multi_v7_defconfig : passed 2:15.77 pit arm-multi_lpae_defconfig : passed 2:21.02 pit arm-multi_v7_nosmp_defconfig : warnings 2:13.43 seattle arm64-defconfig : warnings 2:33.47 snow arm-exynos_defconfig : passed 2:09.01 snow arm-multi_v7_defconfig : passed 2:21.92 snow arm-multi_lpae_defconfig : passed 2:03.09 trimslice arm-tegra_defconfig : passed 1:40.63 trimslice arm-multi_v7_defconfig : passed 1:50.81 trimslice arm-multi_v7_nosmp_defconfig : warnings 1:42.71 wandboard arm-multi_v7_defconfig : passed 1:15.48 wandboard arm-multi_v7_nosmp_defconfig : warnings 1:23.79
Offline boards:
beaver arm-tegra_defconfig : OFFLINE 2:12.79 beaver arm-multi_v7_defconfig : OFFLINE 2:24.36 beaver arm-multi_v7_nosmp_defconfig : OFFLINE 2:15.08 colibri-vf61 arm-imx_v6_v7_defconfig : OFFLINE 1:17.66 colibri-vf61 arm-multi_v7_defconfig : OFFLINE 1:15.43 colibri-vf61 arm-multi_v7_nosmp_defconfig : OFFLINE 1:28.25 parallella arm-multi_v7_defconfig : OFFLINE 2:31.99 parallella arm-multi_v7_nosmp_defconfig : OFFLINE 2:15.08 rk3288evb arm-multi_v7_defconfig : OFFLINE 1:00.89 rk3288evb arm-multi_lpae_defconfig : OFFLINE 0:50.85 rk3288evb arm-multi_v7_nosmp_defconfig : OFFLINE 0:50.24 sama5 arm-sama5_defconfig : OFFLINE 2:14.96 sama5d3-xplained arm-sama5_defconfig : OFFLINE 2:24.84 socfpga arm-socfpga_defconfig : OFFLINE 3:15.63 socfpga arm-multi_v7_defconfig : OFFLINE 2:29.28 socfpga arm-multi_v7_nosmp_defconfig : OFFLINE 2:15.22
Board legend is available at http://arm-soc.lixom.net/boards.html
Board arndale-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
[ 1.569378] usbcore: registered new interface driver net1080 [ 1.575018] usbcore: registered new interface driver cdc_subset [ 1.580920] usbcore: registered new interface driver zaurus [ 1.586499] usbcore: registered new interface driver cdc_ncm [ 1.592801] usb_phy_generic.0.auto supply vcc not found, using dummy regulator [ 1.599410] usb_phy_generic.1.auto supply vcc not found, using dummy regulator [ 1.606534] exynos-dwc3 usb@12000000: no suspend clk specified [ 1.612322] usb@12000000 supply vdd33 not found, using dummy regulator [ 1.618842] usb@12000000 supply vdd10 not found, using dummy regulator [ 1.627209] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.632273] ehci-pci: EHCI PCI platform driver [ 1.636717] ehci-platform: EHCI generic plat [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.6.0-rc6-00205-g01ec716 (build@brutus) (gcc version 6.1.0 (GCC) ) #1 Fri May 6 13:02:36 PDT 2016 [ 0.000000] CPU: ARMv7 Processor [410fc0f4] revision 4 (ARMv7), cr=10c53c7d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache [ 0.000000] Machine model: Insignal Arndale evaluation board based on EXYNOS5250 [ 0.000000] cma: Reserved 64 MiB at 0xbc000000 [ 0.000000] Memory policy: Data cache writeback [ 0.000000] Samsung CPU ID: 0x43520010 [ 0.000000] On node 0 totalpages: 520192 [ 0.000000] free_area_init_node: node 0, pgdat c10fd334, node_mem_map eeff7000 [ 0.000000] DMA zone: 1536 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 192512 pages, LIFO batch:31 [ 0.000000] HighMem zone: 327680 pages, LIFO batch:31 [ 0.000000] ------------[ cut here ]------------ [ 0.000000] WARNING: CPU: 0 PID: 0 at /home/build/work/batch/arch/arm/kernel/devtree.c:149 arm_dt_init_cpu_maps+0xf8/0x134 [ 0.000000] DT /cpu 2 nodes greater than max cores 1, capping them [ 0.000000] Modules linked in: [ 0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 4.6.0-rc6-00205-g01ec716 #1 [ 0.000000] Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) [ 0.000000] [<c030e70c>] (unwind_backtrace) from [<c030b298>] (show_stack+0x10/0x14) [ 0.000000] [<c030b298>] (show_stack) from [<c0335ff8>] (__warn+0xe4/0xfc) [ 0.000000] [<c0335ff8>] (__warn) from [<c0336048>] (warn_slowpath_fmt+0x38/0x48 [PYBOOT] [arndale 18:31]: got exception: maximum recursion depth exceeded ~$off
[PYBOOT] [arndale 18:32]: Done. Board bbb-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.626138] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.636367] ledtrig-cpu: registered to indicate activity on CPUs [ 1.643458] usbcore: registered new interface driver usbhid [ 1.649386] usbhid: USB HID core driver [ 1.661304] NET: Registered protocol family 10 [ 1.667881] sit: IPv6 over IPv4 tunneling driver [ 1.674024] NET: Registered protocol family 17 [ 1.678792] can: controller area network core (rev 20120528 abi 9) [ 1.685428] NET: Registered protocol family 29 [ 1.690153] can: raw protocol (rev 20120528) [ 1.694674] can: broadcast manager protocol (rev 20120528 t) [ 1.700671] can: netlink gateway (rev 20130117) max_hops=1 [ 1.707465] Key type dns_resolver registered [ 1.712369] omap_voltage_late_init: Voltage driver support not added [ 1.720651] ThumbEE CPU extension supported. [ 1.725282] Registering SWP/SWPB emulation handler [ 1.767645] tps65217 0-0024: TPS65217 ID 0xe version 1.2 [ 1.774170] at24 0-0050: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.781947] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 1.790624] at24 2-0054: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.798545] at24 2-0055: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.806376] at24 2-0056: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.814188] at24 2-0057: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.821525] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz [ 1.830222] cpufreq: cpufreq_online: CPU0: Running at unlisted freq: 550000 KHz [ 1.838144] cpufreq: cpufreq_online: CPU0: Unlisted initial frequency changed to: 600000 KHz [ 1.847875] mmc1: new high speed MMC card at address 0001 [ 1.855123] hctosys: unable to open rtc device (rtc0) [ 1.868095] mmcblk1: mmc1:0001 MMC02G 1.79 GiB [ 1.874102] mmcblk1boot0: mmc1:0001 MMC02G partition 1 1.00 MiB [ 1.881086] mmcblk1boot1: mmc1:0001 MMC02G partition 2 1.00 MiB [ 1.889930] mmcblk1: p1 p2 [ 1.895650] Waiting for root device /dev/mmcblk0p2...
[PYBOOT] [bbb 01:52]: Timed out waiting for "<type 'str'>":
[PYBOOT] [bbb 01:53]: got exception: timeout ~$off
[PYBOOT] [bbb 01:54]: Done. Board bbb-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
[ 1.322309] sdhci: Secure Digital Host Controller Interface driver [ 1.328840] sdhci: Copyright(c) Pierre Ossman [ 1.334677] omap_hsmmc 48060000.mmc: Got CD GPIO [ 1.397063] Synopsys Designware Multimedia Card Interface Driver [ 1.404467] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.413701] ledtrig-cpu: registered to indicate activity on CPUs [ 1.420444] usbcore: registered new interface driver usbhid [ 1.426320] usbhid: USB HID core driver [ 1.436009] NET: Registered protocol family 10 [ 1.442490] sit: IPv6 over IPv4 tunneling driver [ 1.448382] NET: Registered protocol family 17 [ 1.453125] can: controller area network core (rev 20120528 abi 9) [ 1.459719] NET: Registered protocol family 29 [ 1.464411] can: raw protocol (rev 20120528) [ 1.468923] can: broadcast manager protocol (rev 20120528 t) [ 1.474899] can: netlink gateway (rev 20130117) max_hops=1 [ 1.481461] Key type dns_resolver registered [ 1.486306] omap_voltage_late_init: Voltage driver support not added [ 1.494103] ThumbEE CPU extension supported. [ 1.506701] at24 0-0050: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.514263] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 1.522319] at24 2-0054: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.530060] at24 2-0055: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.537752] at24 2-0056: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.545425] at24 2-0057: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.552708] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz [ 1.560386] hctosys: unable to open rtc device (rtc0) [ 1.571128] Waiting for root device /dev/mmcblk0p2... [ 1.606311] mmc1: new high speed MMC card at address 0001 [ 1.612781] mmcblk1: mmc1:0001 MMC02G 1.79 GiB [ 1.617850] mmcblk1boot0: mmc1:0001 MMC02G partition 1 1.00 MiB [ 1.624332] mmcblk1boot1: mmc1:0001 MMC02G partition 2 1.00 MiB [ 1.632773] mmcblk1: p1 p2
[PYBOOT] [bbb 02:15]: Timed out waiting for "<type 'str'>":
[PYBOOT] [bbb 02:16]: got exception: timeout ~$off
[PYBOOT] [bbb 02:18]: Done. Board bbb-arm-omap2plus_defconfig failure log: -------------------------------------------------
[ 2.034687] omap_hsmmc 481d8000.mmc: lookup for GPIO cd failed [ 2.040802] omap_hsmmc 481d8000.mmc: GPIO lookup for consumer wp [ 2.047141] omap_hsmmc 481d8000.mmc: using device tree for GPIO lookup [ 2.054017] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@481d8000[0]' [ 2.063612] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@481d8000[0]' [ 2.073108] omap_hsmmc 481d8000.mmc: using lookup tables for GPIO lookup [ 2.080124] omap_hsmmc 481d8000.mmc: lookup for GPIO wp failed [ 2.123550] ledtrig-cpu: registered to indicate activity on CPUs [ 2.132235] oprofile: using arm/armv7 [ 2.137329] Initializing XFRM netlink socket [ 2.142402] NET: Registered protocol family 10 [ 2.153112] sit: IPv6 over IPv4 tunneling driver [ 2.161879] NET: Registered protocol family 17 [ 2.166809] NET: Registered protocol family 15 [ 2.172025] Key type dns_resolver registered [ 2.176962] omap_voltage_late_init: Voltage driver support not added [ 2.183701] sr_dev_init: No voltage domain specified for smartreflex0. Cannot initialize [ 2.192164] sr_dev_init: No voltage domain specified for smartreflex1. Cannot initialize [ 2.202399] ThumbEE CPU extension supported. [ 2.207053] Registering SWP/SWPB emulation handler [ 2.212084] SmartReflex Class3 initialized [ 2.281244] tps65217 0-0024: TPS65217 ID 0xe version 1.2 [ 2.288519] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 2.299013] mmc1: new high speed MMC card at address 0001 [ 2.311149] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz [ 2.319444] mmcblk1: mmc1:0001 MMC02G 1.79 GiB [ 2.327222] hctosys: unable to open rtc device (rtc0) [ 2.332545] sr_init: No PMIC hook to init smartreflex [ 2.338331] sr_init: platform driver register failed for SR [ 2.378361] mmcblk1boot0: mmc1:0001 MMC02G partition 1 1.00 MiB [ 2.386359] mmcblk1boot1: mmc1:0001 MMC02G partition 2 1.00 MiB [ 2.400635] mmcblk1: p1 p2 [ 2.418159] Waiting for root device /dev/mmcblk0p2...
[PYBOOT] [bbb 01:51]: Timed out waiting for "<type 'str'>":
[PYBOOT] [bbb 01:52]: got exception: timeout ~$off
[PYBOOT] [bbb 01:54]: Done. Board beagleboard-x15-arm-multi_lpae_defconfig failure log: -------------------------------------------------
[ 1.717473] at24 0-0050: 4096 byte 24c32 EEPROM, writable, 1 bytes/write [ 1.724556] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 1.750716] rtc-ds1307 2-006f: SET TIME! [ 1.756448] rtc-ds1307 2-006f: rtc core: registered mcp7941x as rtc0 [ 1.763195] rtc-ds1307 2-006f: 64 bytes nvram [ 1.767804] omap_i2c 48060000.i2c: bus 2 rev0.12 at 400 kHz [ 1.776011] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 1.781801] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 [ 1.790049] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x00010010 [ 1.799215] xhci-hcd xhci-hcd.0.auto: irq 400, io mem 0x48890000 [ 1.806088] hub 1-0:1.0: USB hub found [ 1.810040] hub 1-0:1.0: 1 port detected [ 1.814444] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 1.820225] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 [ 1.828335] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.837346] hub 2-0:1.0: USB hub found [ 1.841317] hub 2-0:1.0: 1 port detected [ 1.847345] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 1.881364] vdd_3v3: supplied by regen1 [ 1.919414] rtc-ds1307 2-006f: setting system clock to 2001-01-01 00:00:00 UTC (978307200) [ 1.937373] aic_dvdd_fixed: disabling [ 1.942112] Waiting for root device /dev/mmcblk0p1... [ 1.969284] mmc1: new high speed MMC card at address 0001 [ 1.975272] mmcblk1: mmc1:0001 S10004 3.56 GiB [ 1.980137] mmcblk1boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 1.986474] mmcblk1boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 1.993340] mmcblk1: p1 [ 2.120218] usb 1-1: new high-speed USB device number 2 using xhci-hcd [ 2.155243] usb 2-1: new SuperSpeed USB device number 2 using xhci-hcd [ 2.180446] hub 2-1:1.0: USB hub found [ 2.184428] hub 2-1:1.0: 4 ports detected [ 2.276469] hub 1-1:1.0: USB hub found [ 2.280450] hub 1-1:1.0: 4 ports detected
[PYBOOT] [beagleboard-x15 01:51]: Timed out waiting for "<type 'str'>":
[PYBOOT] [beagleboard-x15 01:52]: got exception: timeout ~$off
[PYBOOT] [beagleboard-x15 01:54]: Done. Board beagleboard-x15-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.717975] at24 0-0050: 4096 byte 24c32 EEPROM, writable, 1 bytes/write [ 1.725063] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 1.750718] rtc-ds1307 2-006f: SET TIME! [ 1.756474] rtc-ds1307 2-006f: rtc core: registered mcp7941x as rtc0 [ 1.763233] rtc-ds1307 2-006f: 64 bytes nvram [ 1.767854] omap_i2c 48060000.i2c: bus 2 rev0.12 at 400 kHz [ 1.776054] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 1.781833] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 [ 1.790088] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x00010010 [ 1.799260] xhci-hcd xhci-hcd.0.auto: irq 400, io mem 0x48890000 [ 1.806135] hub 1-0:1.0: USB hub found [ 1.810090] hub 1-0:1.0: 1 port detected [ 1.814494] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 1.820271] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 [ 1.828384] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.837394] hub 2-0:1.0: USB hub found [ 1.841355] hub 2-0:1.0: 1 port detected [ 1.847362] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 1.881330] vdd_3v3: supplied by regen1 [ 1.917934] rtc-ds1307 2-006f: setting system clock to 2001-01-01 00:00:00 UTC (978307200) [ 1.935516] aic_dvdd_fixed: disabling [ 1.940265] Waiting for root device /dev/mmcblk0p1... [ 1.962267] mmc1: new high speed MMC card at address 0001 [ 1.968241] mmcblk1: mmc1:0001 S10004 3.56 GiB [ 1.973114] mmcblk1boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 1.979462] mmcblk1boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 1.986337] mmcblk1: p1 [ 2.120208] usb 1-1: new high-speed USB device number 2 using xhci-hcd [ 2.155234] usb 2-1: new SuperSpeed USB device number 2 using xhci-hcd [ 2.180492] hub 2-1:1.0: USB hub found [ 2.184471] hub 2-1:1.0: 4 ports detected [ 2.276514] hub 1-1:1.0: USB hub found [ 2.280504] hub 1-1:1.0: 4 ports detected
[PYBOOT] [beagleboard-x15 01:41]: Timed out waiting for "<type 'str'>":
[PYBOOT] [beagleboard-x15 01:42]: got exception: timeout ~$off
[PYBOOT] [beagleboard-x15 01:43]: Done. Board beagleboard-x15-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
[ 1.590948] at24 0-0050: 4096 byte 24c32 EEPROM, writable, 1 bytes/write [ 1.597998] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 1.623327] rtc-ds1307 2-006f: SET TIME! [ 1.628948] rtc-ds1307 2-006f: rtc core: registered mcp7941x as rtc0 [ 1.635655] rtc-ds1307 2-006f: 64 bytes nvram [ 1.640238] omap_i2c 48060000.i2c: bus 2 rev0.12 at 400 kHz [ 1.647621] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 1.653392] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 [ 1.661594] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x00010010 [ 1.670739] xhci-hcd xhci-hcd.0.auto: irq 400, io mem 0x48890000 [ 1.677451] hub 1-0:1.0: USB hub found [ 1.681397] hub 1-0:1.0: 1 port detected [ 1.685711] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 1.691466] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 [ 1.699533] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.708397] hub 2-0:1.0: USB hub found [ 1.712332] hub 2-0:1.0: 1 port detected [ 1.717575] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 1.753553] vdd_3v3: supplied by regen1 [ 1.784649] rtc-ds1307 2-006f: setting system clock to 2001-01-01 00:00:00 UTC (978307200) [ 1.797634] aic_dvdd_fixed: disabling [ 1.803017] Waiting for root device /dev/mmcblk0p1... [ 1.849866] mmc1: new high speed MMC card at address 0001 [ 1.855739] mmcblk1: mmc1:0001 S10004 3.56 GiB [ 1.860569] mmcblk1boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 1.866864] mmcblk1boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 1.873650] mmcblk1: p1 [ 1.992861] usb 1-1: new high-speed USB device number 2 using xhci-hcd [ 2.022881] usb 2-1: new SuperSpeed USB device number 2 using xhci-hcd [ 2.051637] hub 2-1:1.0: USB hub found [ 2.055615] hub 2-1:1.0: 4 ports detected [ 2.147636] hub 1-1:1.0: USB hub found [ 2.151602] hub 1-1:1.0: 4 ports detected
[PYBOOT] [beagleboard-x15 02:02]: Timed out waiting for "<type 'str'>":
[PYBOOT] [beagleboard-x15 02:03]: got exception: timeout ~$off
[PYBOOT] [beagleboard-x15 02:04]: Done. Board beagleboard-x15-arm-omap2plus_defconfig failure log: -------------------------------------------------
[ 2.175422] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 2.182291] of_get_named_gpiod_flags: parsed 'cd-gpios' property of node '/ocp/mmc@4809c000[0]' - status (0) [ 2.192680] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 2.197541] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer wp [ 2.203856] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 2.210702] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@4809c000[0]' [ 2.220305] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@4809c000[0]' [ 2.229802] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 2.236860] omap_hsmmc 4809c000.mmc: lookup for GPIO wp failed [ 2.283910] omap_hsmmc 480b4000.mmc: GPIO lookup for consumer cd [ 2.290215] omap_hsmmc 480b4000.mmc: using device tree for GPIO lookup [ 2.297088] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/ocp/mmc@480b4000[0]' [ 2.306686] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/ocp/mmc@480b4000[0]' [ 2.316187] omap_hsmmc 480b4000.mmc: using lookup tables for GPIO lookup [ 2.323234] omap_hsmmc 480b4000.mmc: lookup for GPIO cd failed [ 2.329354] omap_hsmmc 480b4000.mmc: GPIO lookup for consumer wp [ 2.335678] omap_hsmmc 480b4000.mmc: using device tree for GPIO lookup [ 2.342528] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@480b4000[0]' [ 2.352114] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@480b4000[0]' [ 2.361625] omap_hsmmc 480b4000.mmc: using lookup tables for GPIO lookup [ 2.368677] omap_hsmmc 480b4000.mmc: lookup for GPIO wp failed [ 2.375379] vdd_3v3: supplied by regen1 [ 2.414004] hctosys: unable to open rtc device (rtc0) [ 2.419306] sr_init: No PMIC hook to init smartreflex [ 2.424811] sr_init: platform driver register failed for SR [ 2.465664] mmc1: new high speed MMC card at address 0001 [ 2.472927] aic_dvdd_fixed: disabling [ 2.473601] mmcblk1: mmc1:0001 S10004 3.56 GiB [ 2.474351] mmcblk1boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 2.474971] mmcblk1boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 2.484706] mmcblk1: p1 [ 2.496958] ldousb: disabling [ 2.503136] Waiting for root device /dev/mmcblk0p1...
[PYBOOT] [beagleboard-x15 01:41]: Timed out waiting for "<type 'str'>":
[PYBOOT] [beagleboard-x15 01:42]: got exception: timeout ~$off
[PYBOOT] [beagleboard-x15 01:43]: Done. Board colombus-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
[....] Synthesizing the initial hotplug events...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Waiting for /dev to be fully populated...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Activating swap...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [ 41.568624] EXT4-fs (mmcblk0p1): warning: mounting fs with errors, running e2fsck is recommended [ 41.582990] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [....] Cleaning up temporary files... /tmp[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] Activating lvm and md swap...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Checking file systems...fsck from util-linux 2.20.1 [?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Mounting local filesystems...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Activating swapfile swap...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Cleaning up temporary files...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] Setting kernel variables ...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [ 84.976745] random: dd urandom read with 56 bits of entropy available [....] Configuring network interfaces...Internet Systems Consortium DHCP Client 4.2.2 Copyright 2004-2011 Internet Systems Consortium. All rights reserved. For info, please visit https://www.isc.org/software/dhcp/
[ 89.386920] eth0: device MAC address 8a:9f:7d:a3:3b:90 [ 89.544183] RX IPC Checksum Offload disabled [ 89.548796] No MAC Management Counters available [ 89.554552] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready Listening on LPF/eth0/8a:9f:7d:a3:3b:90 Sending on LPF/eth0/8a:9f:7d:a3:3b:90 Sending on Socket/fallback DHCPREQUEST on eth0 to 255.255.255.255 port 67 DHCPREQUEST on eth0 to 255.255.255.255 port 67 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 7 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 11 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 21 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 10
[PYBOOT] [colombus 03:18]: Timed out waiting for "<type 'str'>": DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 10
[PYBOOT] [colombus 03:19]: got exception: timeout ~$off
[PYBOOT] [colombus 03:20]: Done. Board cosmic-arm-imx_v6_v7_defconfig failure log: -------------------------------------------------
[ 14.366573] blk_update_request: I/O error, dev mmcblk0, sector 3633185 [ 18.440770] mmcblk0: error -110 transferring data, sector 3633186, nr 230, cmd response 0x900, card status 0x0 [ 18.450874] blk_update_request: I/O error, dev mmcblk0, sector 3633186 [ 22.525115] mmcblk0: error -110 transferring data, sector 3633187, nr 229, cmd response 0x900, card status 0x0 [ 22.535216] blk_update_request: I/O error, dev mmcblk0, sector 3633187 [ 26.609452] mmcblk0: error -110 transferring data, sector 3633188, nr 228, cmd response 0x900, card status 0x0 [ 26.619567] blk_update_request: I/O error, dev mmcblk0, sector 3633188 [ 30.693815] mmcblk0: error -110 transferring data, sector 3633189, nr 227, cmd response 0x900, card status 0x0 [ 30.703928] blk_update_request: I/O error, dev mmcblk0, sector 3633189 [ 34.778169] mmcblk0: error -110 transferring data, sector 3633190, nr 226, cmd response 0x900, card status 0x0 [ 34.788285] blk_update_request: I/O error, dev mmcblk0, sector 3633190 [ 38.862471] mmcblk0: error -110 transferring data, sector 3633191, nr 225, cmd response 0x900, card status 0x0 [ 38.872584] blk_update_request: I/O error, dev mmcblk0, sector 3633191 [ 42.946855] mmcblk0: error -110 transferring data, sector 3633192, nr 224, cmd response 0x900, card status 0x0 [ 42.956966] blk_update_request: I/O error, dev mmcblk0, sector 3633192 [ 47.031158] mmcblk0: error -110 transferring data, sector 3633193, nr 223, cmd response 0x900, card status 0x0 [ 47.041267] blk_update_request: I/O error, dev mmcblk0, sector 3633193 [ 51.115642] mmcblk0: error -110 transferring data, sector 3633194, nr 222, cmd response 0x900, card status 0x0 [ 51.125743] blk_update_request: I/O error, dev mmcblk0, sector 3633194 [ 55.199976] mmcblk0: error -110 transferring data, sector 3633195, nr 221, cmd response 0x900, card status 0x0 [ 55.210080] blk_update_request: I/O error, dev mmcblk0, sector 3633195 [ 59.284317] mmcblk0: error -110 transferring data, sector 3633196, nr 220, cmd response 0x900, card status 0x0 [ 59.294418] blk_update_request: I/O error, dev mmcblk0, sector 3633196 [ 63.368654] mmcblk0: error -110 transferring data, sector 3633197, nr 219, cmd response 0x900, card status 0x0 [ 63.378763] blk_update_request: I/O error, dev mmcblk0, sector 3633197 [ 67.452949] mmcblk0: error -110 transferring data, sector 3633198, nr 218, cmd response 0x900, card status 0x0 [ 67.463058] blk_update_request: I/O error, dev mmcblk0, sector 3633198 [ 71.537292] mmcblk0: error -110 transferring data, sector 3633199, nr 217, cmd response 0x900, card status 0x0 [ 71.547403] blk_update_request: I/O error, dev mmcblk0, sector 3633199 [ 75.621599] mmcblk0: error -110 transferring data, sector 3633200, nr 216, cmd response 0x900, card status 0x0 [ 75.631705] blk_update_request: I/O error, dev mmcblk0, sector 3633200 [ 79.706030] mmcblk0: error -110 transferring data, sector 3633201, nr 215, cmd response 0x900, card status 0x0 [ 79.716128] blk_update_request: I/O error, dev mmcblk0, sector 3633201
[PYBOOT] [cosmic 01:58]: Timed out waiting for "<type 'str'>":
[PYBOOT] [cosmic 01:59]: got exception: timeout ~$off
[PYBOOT] [cosmic 02:00]: Done. Board cosmic-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 14.083138] blk_update_request: I/O error, dev mmcblk0, sector 3633185 [ 18.157125] mmcblk0: error -110 transferring data, sector 3633186, nr 230, cmd response 0x900, card status 0x0 [ 18.167199] blk_update_request: I/O error, dev mmcblk0, sector 3633186 [ 22.241181] mmcblk0: error -110 transferring data, sector 3633187, nr 229, cmd response 0x900, card status 0x0 [ 22.251259] blk_update_request: I/O error, dev mmcblk0, sector 3633187 [ 26.325305] mmcblk0: error -110 transferring data, sector 3633188, nr 228, cmd response 0x900, card status 0x0 [ 26.335367] blk_update_request: I/O error, dev mmcblk0, sector 3633188 [ 30.409353] mmcblk0: error -110 transferring data, sector 3633189, nr 227, cmd response 0x900, card status 0x0 [ 30.419429] blk_update_request: I/O error, dev mmcblk0, sector 3633189 [ 34.493414] mmcblk0: error -110 transferring data, sector 3633190, nr 226, cmd response 0x900, card status 0x0 [ 34.503491] blk_update_request: I/O error, dev mmcblk0, sector 3633190 [ 38.577479] mmcblk0: error -110 transferring data, sector 3633191, nr 225, cmd response 0x900, card status 0x0 [ 38.587546] blk_update_request: I/O error, dev mmcblk0, sector 3633191 [ 42.661533] mmcblk0: error -110 transferring data, sector 3633192, nr 224, cmd response 0x900, card status 0x0 [ 42.671606] blk_update_request: I/O error, dev mmcblk0, sector 3633192 [ 46.745587] mmcblk0: error -110 transferring data, sector 3633193, nr 223, cmd response 0x900, card status 0x0 [ 46.755657] blk_update_request: I/O error, dev mmcblk0, sector 3633193 [ 50.829639] mmcblk0: error -110 transferring data, sector 3633194, nr 222, cmd response 0x900, card status 0x0 [ 50.839723] blk_update_request: I/O error, dev mmcblk0, sector 3633194 [ 54.913707] mmcblk0: error -110 transferring data, sector 3633195, nr 221, cmd response 0x900, card status 0x0 [ 54.923776] blk_update_request: I/O error, dev mmcblk0, sector 3633195 [ 58.997764] mmcblk0: error -110 transferring data, sector 3633196, nr 220, cmd response 0x900, card status 0x0 [ 59.007837] blk_update_request: I/O error, dev mmcblk0, sector 3633196 [ 63.081820] mmcblk0: error -110 transferring data, sector 3633197, nr 219, cmd response 0x900, card status 0x0 [ 63.091896] blk_update_request: I/O error, dev mmcblk0, sector 3633197 [ 67.165879] mmcblk0: error -110 transferring data, sector 3633198, nr 218, cmd response 0x900, card status 0x0 [ 67.175956] blk_update_request: I/O error, dev mmcblk0, sector 3633198 [ 71.249939] mmcblk0: error -110 transferring data, sector 3633199, nr 217, cmd response 0x900, card status 0x0 [ 71.260016] blk_update_request: I/O error, dev mmcblk0, sector 3633199 [ 75.334003] mmcblk0: error -110 transferring data, sector 3633200, nr 216, cmd response 0x900, card status 0x0 [ 75.344077] blk_update_request: I/O error, dev mmcblk0, sector 3633200 [ 79.418057] mmcblk0: error -110 transferring data, sector 3633201, nr 215, cmd response 0x900, card status 0x0 [ 79.428136] blk_update_request: I/O error, dev mmcblk0, sector 3633201
[PYBOOT] [cosmic 02:08]: Timed out waiting for "<type 'str'>":
[PYBOOT] [cosmic 02:09]: got exception: timeout ~$off
[PYBOOT] [cosmic 02:10]: Done. Board cosmic-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
[ 13.873373] blk_update_request: I/O error, dev mmcblk0, sector 3633185 [ 17.947291] mmcblk0: error -110 transferring data, sector 3633186, nr 230, cmd response 0x900, card status 0x0 [ 17.957348] blk_update_request: I/O error, dev mmcblk0, sector 3633186 [ 22.031267] mmcblk0: error -110 transferring data, sector 3633187, nr 229, cmd response 0x900, card status 0x0 [ 22.041320] blk_update_request: I/O error, dev mmcblk0, sector 3633187 [ 26.115237] mmcblk0: error -110 transferring data, sector 3633188, nr 228, cmd response 0x900, card status 0x0 [ 26.125294] blk_update_request: I/O error, dev mmcblk0, sector 3633188 [ 30.199210] mmcblk0: error -110 transferring data, sector 3633189, nr 227, cmd response 0x900, card status 0x0 [ 30.209266] blk_update_request: I/O error, dev mmcblk0, sector 3633189 [ 34.283179] mmcblk0: error -110 transferring data, sector 3633190, nr 226, cmd response 0x900, card status 0x0 [ 34.293241] blk_update_request: I/O error, dev mmcblk0, sector 3633190 [ 38.367154] mmcblk0: error -110 transferring data, sector 3633191, nr 225, cmd response 0x900, card status 0x0 [ 38.377213] blk_update_request: I/O error, dev mmcblk0, sector 3633191 [ 42.451133] mmcblk0: error -110 transferring data, sector 3633192, nr 224, cmd response 0x900, card status 0x0 [ 42.461217] blk_update_request: I/O error, dev mmcblk0, sector 3633192 [ 46.535128] mmcblk0: error -110 transferring data, sector 3633193, nr 223, cmd response 0x900, card status 0x0 [ 46.545171] blk_update_request: I/O error, dev mmcblk0, sector 3633193 [ 50.619082] mmcblk0: error -110 transferring data, sector 3633194, nr 222, cmd response 0x900, card status 0x0 [ 50.629128] blk_update_request: I/O error, dev mmcblk0, sector 3633194 [ 54.703035] mmcblk0: error -110 transferring data, sector 3633195, nr 221, cmd response 0x900, card status 0x0 [ 54.713091] blk_update_request: I/O error, dev mmcblk0, sector 3633195 [ 58.787005] mmcblk0: error -110 transferring data, sector 3633196, nr 220, cmd response 0x900, card status 0x0 [ 58.797057] blk_update_request: I/O error, dev mmcblk0, sector 3633196 [ 62.870972] mmcblk0: error -110 transferring data, sector 3633197, nr 219, cmd response 0x900, card status 0x0 [ 62.881021] blk_update_request: I/O error, dev mmcblk0, sector 3633197 [ 66.954938] mmcblk0: error -110 transferring data, sector 3633198, nr 218, cmd response 0x900, card status 0x0 [ 66.964994] blk_update_request: I/O error, dev mmcblk0, sector 3633198 [ 71.038913] mmcblk0: error -110 transferring data, sector 3633199, nr 217, cmd response 0x900, card status 0x0 [ 71.048968] blk_update_request: I/O error, dev mmcblk0, sector 3633199 [ 75.122885] mmcblk0: error -110 transferring data, sector 3633200, nr 216, cmd response 0x900, card status 0x0 [ 75.132942] blk_update_request: I/O error, dev mmcblk0, sector 3633200 [ 79.206853] mmcblk0: error -110 transferring data, sector 3633201, nr 215, cmd response 0x900, card status 0x0 [ 79.216915] blk_update_request: I/O error, dev mmcblk0, sector 3633201
[PYBOOT] [cosmic 02:02]: Timed out waiting for "<type 'str'>":
[PYBOOT] [cosmic 02:03]: got exception: timeout ~$off
[PYBOOT] [cosmic 02:04]: Done. Board dalmore-arm-multi_lpae_defconfig failure log: -------------------------------------------------
[ 2.486021] Key type dns_resolver registered [ 2.492431] ThumbEE CPU extension supported. [ 2.496854] Registering SWP/SWPB emulation handler [ 2.521695] vdd-sys-5v0: supplied by vdd_ac_bat [ 2.528949] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 2.540466] vdd_hdmi_5v0: supplied by vdd-sys-5v0 [ 2.555702] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.562460] [drm] No driver support for vblank timestamp query. [ 2.582600] mmc1: new high speed MMC card at address 0001 [ 2.593036] mmcblk1: mmc1:0001 SEM32G 29.1 GiB [ 2.601154] mmcblk1boot0: mmc1:0001 SEM32G partition 1 4.00 MiB [ 2.611839] mmcblk1boot1: mmc1:0001 SEM32G partition 2 4.00 MiB [ 2.621417] mmcblk1rpmb: mmc1:0001 SEM32G partition 3 4.00 MiB [ 2.632955] mmcblk1: p1 [ 2.740410] Console: switching to colour frame buffer device 240x75 [ 2.827697] drm drm: fb0: frame buffer device [ 2.843815] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 2.853589] usb2_vbus: supplied by vdd-sys-5v0 [ 2.864449] tegra-ehci 7d008000.usb: EHCI Host Controller [ 2.870046] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 2.880017] tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 [ 2.893758] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 2.903989] hub 1-0:1.0: USB hub found [ 2.908020] hub 1-0:1.0: 1 port detected [ 2.918600] input: gpio-keys as /devices/soc0/gpio-keys/input/input0 [ 2.932907] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 2.994876] dvdd_ts: disabling [ 2.997977] usb1_vbus: disabling [ 3.001342] vdd_cam_1v8_reg: disabling [ 3.008979] Waiting for root device /dev/mmcblk0p1... [ 3.223782] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 4.201241] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f [ 64.548717] random: nonblocking pool is initialized
[PYBOOT] [dalmore 01:50]: Timed out waiting for "<type 'str'>":
[PYBOOT] [dalmore 01:51]: got exception: timeout ~$off
[PYBOOT] [dalmore 01:52]: Done. Board dalmore-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 2.486319] Key type dns_resolver registered [ 2.492715] ThumbEE CPU extension supported. [ 2.497136] Registering SWP/SWPB emulation handler [ 2.530577] vdd-sys-5v0: supplied by vdd_ac_bat [ 2.538825] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 2.549268] vdd_hdmi_5v0: supplied by vdd-sys-5v0 [ 2.566318] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.573084] [drm] No driver support for vblank timestamp query. [ 2.585279] mmc1: new high speed MMC card at address 0001 [ 2.595403] mmcblk1: mmc1:0001 SEM32G 29.1 GiB [ 2.603774] mmcblk1boot0: mmc1:0001 SEM32G partition 1 4.00 MiB [ 2.613389] mmcblk1boot1: mmc1:0001 SEM32G partition 2 4.00 MiB [ 2.622015] mmcblk1rpmb: mmc1:0001 SEM32G partition 3 4.00 MiB [ 2.632828] mmcblk1: p1 [ 2.752018] Console: switching to colour frame buffer device 240x75 [ 2.839313] drm drm: fb0: frame buffer device [ 2.859033] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 2.869133] usb2_vbus: supplied by vdd-sys-5v0 [ 2.880773] tegra-ehci 7d008000.usb: EHCI Host Controller [ 2.886376] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 2.895218] tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 [ 2.909049] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 2.919329] hub 1-0:1.0: USB hub found [ 2.923333] hub 1-0:1.0: 1 port detected [ 2.933480] input: gpio-keys as /devices/soc0/gpio-keys/input/input0 [ 2.947352] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 3.009411] dvdd_ts: disabling [ 3.012513] usb1_vbus: disabling [ 3.015877] vdd_cam_1v8_reg: disabling [ 3.023188] Waiting for root device /dev/mmcblk0p1... [ 3.234050] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 4.212698] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f [ 49.249009] random: nonblocking pool is initialized
[PYBOOT] [dalmore 01:56]: Timed out waiting for "<type 'str'>":
[PYBOOT] [dalmore 01:57]: got exception: timeout ~$off
[PYBOOT] [dalmore 01:58]: Done. Board dalmore-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
[ 2.036340] can: broadcast manager protocol (rev 20120528 t) [ 2.042092] can: netlink gateway (rev 20130117) max_hops=1 [ 2.048726] Key type dns_resolver registered [ 2.053865] ThumbEE CPU extension supported. [ 2.085654] vdd-sys-5v0: supplied by vdd_ac_bat [ 2.090586] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 2.100689] vdd_hdmi_5v0: supplied by vdd-sys-5v0 [ 2.122894] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.129579] [drm] No driver support for vblank timestamp query. [ 2.294996] Console: switching to colour frame buffer device 240x75 [ 2.380872] drm drm: fb0: frame buffer device [ 2.385486] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 2.393472] usb2_vbus: supplied by vdd-sys-5v0 [ 2.399499] mmc1: new high speed MMC card at address 0001 [ 2.408632] tegra-ehci 7d008000.usb: EHCI Host Controller [ 2.414220] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 2.422307] mmcblk1: mmc1:0001 SEM32G 29.1 GiB [ 2.427335] mmcblk1boot0: mmc1:0001 SEM32G partition 1 4.00 MiB [ 2.434044] tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 [ 2.440125] mmcblk1boot1: mmc1:0001 SEM32G partition 2 4.00 MiB [ 2.446509] mmcblk1rpmb: mmc1:0001 SEM32G partition 3 4.00 MiB [ 2.453273] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 2.460471] mmcblk1: p1 [ 2.465370] hub 1-0:1.0: USB hub found [ 2.473676] hub 1-0:1.0: 1 port detected [ 2.481859] input: gpio-keys as /devices/soc0/gpio-keys/input/input0 [ 2.493155] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 2.533810] dvdd_ts: disabling [ 2.536964] usb1_vbus: disabling [ 2.540243] vdd_cam_1v8_reg: disabling [ 2.545689] Waiting for root device /dev/mmcblk0p1... [ 2.784589] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 3.736897] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f
[PYBOOT] [dalmore 01:51]: Timed out waiting for "<type 'str'>":
[PYBOOT] [dalmore 01:52]: got exception: timeout ~$off
[PYBOOT] [dalmore 01:53]: Done. Board dalmore-arm-tegra_defconfig failure log: -------------------------------------------------
[ 2.625739] Bluetooth: RFCOMM ver 1.11 [ 2.629930] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 2.635329] Bluetooth: BNEP socket layer initialized [ 2.640430] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 2.646426] Bluetooth: HIDP socket layer initialized [ 2.653349] Key type dns_resolver registered [ 2.662990] Registering SWP/SWPB emulation handler [ 2.688139] vdd-sys-5v0: supplied by vdd_ac_bat [ 2.693637] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 2.700611] vdd_hdmi_5v0: supplied by vdd-sys-5v0 [ 2.722494] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.729403] [drm] No driver support for vblank timestamp query. [ 2.905279] Console: switching to colour frame buffer device 240x75 [ 2.992139] drm drm: fb0: frame buffer device [ 3.019255] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.026494] usb2_vbus: supplied by vdd-sys-5v0 [ 3.033532] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.039244] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 3.048264] tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 [ 3.069185] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 3.083243] hub 1-0:1.0: USB hub found [ 3.087230] hub 1-0:1.0: 1 port detected [ 3.101325] input: gpio-keys as /devices/soc0/gpio-keys/input/input1 [ 3.116346] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:01 UTC (946684801) [ 3.211987] dvdd_ts: disabling [ 3.215093] usb1_vbus: disabling [ 3.218355] vdd_cam_1v8_reg: disabling [ 3.223143] ALSA device list: [ 3.226157] #0: NVIDIA Tegra Dalmore [ 3.232136] Waiting for root device /dev/mmcblk0p1... [ 3.409173] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 4.432595] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f [ 62.629143] random: nonblocking pool is initialized
[PYBOOT] [dalmore 01:45]: Timed out waiting for "<type 'str'>":
[PYBOOT] [dalmore 01:46]: got exception: timeout ~$off
[PYBOOT] [dalmore 01:48]: Done. Board odroidu3-arm-exynos_defconfig failure log: -------------------------------------------------
[ 1.642256] usb 1-3: new high-speed USB device number 2 using exynos-ehci [ 1.651174] dwmmc_exynos 12550000.mmc: allocated mmc-pwrseq [ 1.682300] dwmmc_exynos 12550000.mmc: 1 slots initialized [ 1.683461] usbcore: registered new interface driver usbhid [ 1.688714] usbhid: USB HID core driver [ 1.697395] NET: Registered protocol family 10 [ 1.698013] sit: IPv6 over IPv4 tunneling driver [ 1.701226] NET: Registered protocol family 17 [ 1.705261] NET: Registered protocol family 15 [ 1.709713] Key type dns_resolver registered [ 1.714041] Registering SWP/SWPB emulation handler [ 1.719861] s3c-rtc 10070000.rtc: rtc disabled, re-enabling [ 1.724291] s3c-rtc 10070000.rtc: warning: invalid RTC value so initializing it [ 1.731674] s3c-rtc 10070000.rtc: rtc core: registered s3c as rtc1 [ 1.751153] mmc_host mmc1: Bus speed (slot 0) = 44000000Hz (slot req 52000000Hz, actual 44000000HZ div = 0) [ 1.755426] mmc_host mmc1: Bus speed (slot 0) = 73333333Hz (slot req 52000000Hz, actual 36666666HZ div = 1) [ 1.762818] max98090 1-0010: MAX98090 REVID=0x43 [ 1.765036] max98090 1-0010: use default 2.8v micbias [ 1.775041] mmc1: new DDR MMC card at address 0001 [ 1.780337] mmcblk1: mmc1:0001 008G92 7.28 GiB [ 1.782914] asoc-simple-card sound: HiFi <-> 3830000.i2s mapping ok [ 1.785859] input: gpio_keys as /devices/platform/gpio_keys/input/input0 [ 1.797013] mmcblk1boot0: mmc1:0001 008G92 partition 1 4.00 MiB [ 1.802921] mmcblk1boot1: mmc1:0001 008G92 partition 2 4.00 MiB [ 1.808824] mmcblk1rpmb: mmc1:0001 008G92 partition 3 512 KiB [ 1.815375] mmcblk1: p1 p2 [ 1.819138] max77686-rtc max77686-rtc: setting system clock to 2000-01-01 01:00:19 UTC (946688419) [ 1.841807] VDD10_HDMI_1.0V: disabling [ 1.842488] vdd_g3d: disabling [ 1.843561] BUCK8_2.8V: disabling [ 1.847568] ALSA device list: [ 1.849197] #0: Odroid-U3 [ 1.852893] Waiting for root device /dev/mmcblk0p2...
[PYBOOT] [odroidu3 01:52]: Timed out waiting for "<type 'str'>":
[PYBOOT] [odroidu3 01:53]: got exception: timeout ~$off
[PYBOOT] [odroidu3 01:54]: Done. Board omap5uevm-arm-multi_lpae_defconfig failure log: -------------------------------------------------
[ 1.776538] usb 1-3: new high-speed USB device number 2 using ehci-omap [ 1.783728] sit: IPv6 over IPv4 tunneling driver [ 1.789022] NET: Registered protocol family 17 [ 1.793695] can: controller area network core (rev 20120528 abi 9) [ 1.800208] NET: Registered protocol family 29 [ 1.804867] can: raw protocol (rev 20120528) [ 1.809343] can: broadcast manager protocol (rev 20120528 t) [ 1.815275] can: netlink gateway (rev 20130117) max_hops=1 [ 1.821295] Key type dns_resolver registered [ 1.825854] omap_vc_init_channel: No PMIC info for vdd_core [ 1.831684] omap_vp_init: No PMIC info for vdd_core [ 1.836796] omap_vc_init_channel: No PMIC info for vdd_mm [ 1.842447] omap_vp_init: No PMIC info for vdd_mm [ 1.847367] omap_vc_init_channel: No PMIC info for vdd_mpu [ 1.853107] omap_vp_init: No PMIC info for vdd_mpu [ 1.858618] Power Management for TI OMAP4+ devices. [ 1.863857] ThumbEE CPU extension supported. [ 1.868357] Registering SWP/SWPB emulation handler [ 1.875432] palmas 0-0048: Irq flag is 0x00000000 [ 1.901997] palmas 0-0048: Muxing GPIO 2, PWM 0, LED 0 [ 1.912580] palmas-rtc 48070000.i2c:palmas@48:rtc: rtc core: registered 48070000.i2c:palmas as rtc0 [ 1.924052] mmc0: new high speed MMC card at address 0001 [ 1.930160] mmcblk0: mmc0:0001 SEM04G 3.69 GiB [ 1.935082] mmcblk0boot0: mmc0:0001 SEM04G partition 1 2.00 MiB [ 1.941423] mmcblk0boot1: mmc0:0001 SEM04G partition 2 2.00 MiB [ 1.952284] smsc95xx v1.0.4 [ 1.977275] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 2.000135] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 2.003936] smsc95xx 1-3:1.0 eth0: register 'smsc95xx' at usb-4a064c00.ehci-3, smsc95xx USB 2.0 Ethernet, 4e:fe:b1:fe:4b:4a [ 2.051123] cpufreq: cpufreq_online: CPU0: Running at unlisted freq: 1100000 KHz [ 2.059025] cpufreq: cpufreq_online: CPU0: Unlisted initial frequency changed to: 1500000 KHz [ 2.069526] Unable to handle kernel paging request at virtual address 2d491aac [ 2.077104] pgd = c0204000 [ 2.079944] [2d491aac] *pgd=00000000 [PYBOOT] [omap5uevm 02:03]: Timed out waiting for "<type 'str'>":
[PYBOOT] [omap5uevm 02:04]: got exception: timeout ~$off
[PYBOOT] [omap5uevm 02:05]: Done. Board omap5uevm-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.754386] usb 1-3: new high-speed USB device number 2 using ehci-omap [ 1.765161] usbhid: USB HID core driver [ 1.773664] NET: Registered protocol family 10 [ 1.778819] sit: IPv6 over IPv4 tunneling driver [ 1.784088] NET: Registered protocol family 17 [ 1.788753] can: controller area network core (rev 20120528 abi 9) [ 1.795268] NET: Registered protocol family 29 [ 1.799926] can: raw protocol (rev 20120528) [ 1.804396] can: broadcast manager protocol (rev 20120528 t) [ 1.810322] can: netlink gateway (rev 20130117) max_hops=1 [ 1.816352] Key type dns_resolver registered [ 1.820909] omap_vc_init_channel: No PMIC info for vdd_core [ 1.826742] omap_vp_init: No PMIC info for vdd_core [ 1.831852] omap_vc_init_channel: No PMIC info for vdd_mm [ 1.837495] omap_vp_init: No PMIC info for vdd_mm [ 1.842419] omap_vc_init_channel: No PMIC info for vdd_mpu [ 1.848150] omap_vp_init: No PMIC info for vdd_mpu [ 1.853676] Power Management for TI OMAP4+ devices. [ 1.858900] ThumbEE CPU extension supported. [ 1.863392] Registering SWP/SWPB emulation handler [ 1.870492] palmas 0-0048: Irq flag is 0x00000000 [ 1.887196] smsc95xx v1.0.4 [ 1.897022] palmas 0-0048: Muxing GPIO 2, PWM 0, LED 0 [ 1.907569] palmas-rtc 48070000.i2c:palmas@48:rtc: rtc core: registered 48070000.i2c:palmas as rtc0 [ 1.932386] mmc0: new high speed MMC card at address 0001 [ 1.938597] mmcblk0: mmc0:0001 SEM04G 3.69 GiB [ 1.938873] smsc95xx 1-3:1.0 eth0: register 'smsc95xx' at usb-4a064c00.ehci-3, smsc95xx USB 2.0 Ethernet, 7a:cf:a3:b3:20:ff [ 1.955178] mmcblk0boot0: mmc0:0001 SEM04G partition 1 2.00 MiB [ 1.961600] mmcblk0boot1: mmc0:0001 SEM04G partition 2 2.00 MiB [ 1.981915] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 2.005158] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 2.046137] cpufreq: cpufreq_online: CPU0: Running at unlisted freq: 1100000 KHz [ 2.054042] cpufreq: cpufreq_online: CPU0: Unlisted initial frequency changed to: 1500000 KHz
[PYBOOT] [omap5uevm 02:07]: Timed out waiting for "<type 'str'>":
[PYBOOT] [omap5uevm 02:08]: got exception: timeout ~$off
[PYBOOT] [omap5uevm 02:09]: Done. Board omap5uevm-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
[ 2.873853] [<c0301620>] (gic_handle_irq) from [<c030bcd4>] (__irq_svc+0x54/0x70) [ 2.881689] Exception stack(0xee501b78 to 0xee501bc0) [ 2.886981] 1b60: 00000001 ee072254 [ 2.895550] 1b80: 00000000 ee502000 ee482200 00000000 ee06c000 00000000 ee501bc8 ee4823a8 [ 2.904119] 1ba0: c093547a 00000000 ee072240 ee501bc8 c0357ebc c03373f0 60000113 ffffffff [ 2.912693] [<c030bcd4>] (__irq_svc) from [<c03373f0>] (do_exit+0x524/0x908) [ 2.920073] [<c03373f0>] (do_exit) from [<c030b5c4>] (die+0x328/0x394) [ 2.926911] [<c030b5c4>] (die) from [<c031a290>] (__do_kernel_fault.part.0+0x64/0x1e4) [ 2.935203] [<c031a290>] (__do_kernel_fault.part.0) from [<c0315580>] (do_page_fault+0x370/0x384) [ 2.944503] [<c0315580>] (do_page_fault) from [<c030125c>] (do_DataAbort+0x3c/0xb8) [ 2.952525] [<c030125c>] (do_DataAbort) from [<c030bc60>] (__dabt_svc+0x40/0x60) [ 2.960271] Exception stack(0xee501d50 to 0xee501d98) [ 2.965552] 1d40: 00000000 00000087 0000003a 00000000 [ 2.974115] 1d60: 20000013 00000000 00000001 c200af44 c200af44 00000000 00000000 00000000 [ 2.982675] 1d80: ee501de8 ee501da0 c0935834 c0935478 60000093 ffffffff [ 2.989602] [<c030bc60>] (__dabt_svc) from [<c0935478>] (__of_find_all_nodes.part.2+0x14/0x2c) [ 2.998624] [<c0935478>] (__of_find_all_nodes.part.2) from [<c0935834>] (of_find_node_by_phandle+0x70/0x88) [ 3.008826] [<c0935834>] (of_find_node_by_phandle) from [<c0935994>] (__of_parse_phandle_with_args+0x148/0x224) [ 3.019392] [<c0935994>] (__of_parse_phandle_with_args) from [<c0935a98>] (of_parse_phandle+0x28/0x50) [ 3.029140] [<c0935a98>] (of_parse_phandle) from [<c0976668>] (extcon_get_edev_by_phandle+0x2c/0xec) [ 3.038709] [<c0976668>] (extcon_get_edev_by_phandle) from [<c0850de0>] (dwc3_omap_probe+0x25c/0x3fc) [ 3.048373] [<c0850de0>] (dwc3_omap_probe) from [<c07012cc>] (platform_drv_probe+0x50/0xb0) [ 3.057124] [<c07012cc>] (platform_drv_probe) from [<c06ffb14>] (driver_probe_device+0x208/0x2b4) [ 3.066413] [<c06ffb14>] (driver_probe_device) from [<c06fdf34>] (bus_for_each_drv+0x60/0x94) [ 3.075348] [<c06fdf34>] (bus_for_each_drv) from [<c06ff82c>] (__device_attach+0xb0/0x114) [ 3.084001] [<c06ff82c>] (__device_attach) from [<c06fed10>] (bus_probe_device+0x84/0x8c) [ 3.092567] [<c06fed10>] (bus_probe_device) from [<c06ff19c>] (deferred_probe_work_func+0x68/0x94) [ 3.101958] [<c06ff19c>] (deferred_probe_work_func) from [<c0348a1c>] (process_one_work+0x1d4/0x3e0) [ 3.111522] [<c0348a1c>] (process_one_work) from [<c0348c74>] (worker_thread+0x4c/0x55c) [ 3.119996] [<c0348c74>] (worker_thread) from [<c034db54>] (kthread+0xd4/0xec) [ 3.127562] [<c034db54>] (kthread) from [<c0307998>] (ret_from_fork+0x14/0x3c) [ 3.135122] Code: e7973106 e3530000 128d2004 15832004 (e7875106) [ 3.141508] ---[ end trace cb88537fdc8fa203 ]--- [ 3.146344] Kernel panic - not syncing: Fatal exception in interrupt [ 3.152988] ---[ end Kernel panic - not syncing: Fatal exception in interrupt
[PYBOOT] [omap5uevm 00:59]: got exception: panic ~$off
[PYBOOT] [omap5uevm 01:00]: Done. Board seaboard-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.657088] vdd_ldo7,avdd_hdmi,vdd_fuse: supplied by vdd_sm2,vin_ldo* [ 1.667606] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 1.674082] tegra-ehci c5000000.usb: EHCI Host Controller [ 1.679504] tegra-ehci c5000000.usb: new USB bus registered, assigned bus number 3 [ 1.687971] tegra-ehci c5000000.usb: irq 287, io mem 0xc5000000 [ 1.699869] mmc2: switch to bus width 8 failed [ 1.704422] tegra-ehci c5000000.usb: USB 2.0 started, EHCI 1.00 [ 1.711053] mmc2: switch to bus width 4 failed [ 1.715562] mmc2: new high speed MMC card at address 0001 [ 1.715902] hub 3-0:1.0: USB hub found [ 1.715955] hub 3-0:1.0: 1 port detected [ 1.730805] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.731065] mmcblk2: mmc2:0001 MMC08G 7.46 GiB [ 1.733933] mmcblk2boot0: mmc2:0001 MMC08G partition 1 512 KiB [ 1.734330] mmcblk2boot1: mmc2:0001 MMC08G partition 2 512 KiB [ 1.739701] mmcblk2: p3 [ 1.754415] mmc0: queuing unknown CIS tuple 0x80 (50 bytes) [ 1.761733] [drm] No driver support for vblank timestamp query. [ 1.762284] mmc0: queuing unknown CIS tuple 0x80 (7 bytes) [ 1.765172] mmc0: queuing unknown CIS tuple 0x80 (7 bytes) [ 1.772408] mmc0: queuing unknown CIS tuple 0x80 (19 bytes) [ 1.791266] mmc0: queuing unknown CIS tuple 0x02 (1 bytes) [ 1.801318] mmc0: new SDIO card at address 0001 [ 1.891431] Console: switching to colour frame buffer device 170x48 [ 1.914607] drm drm: fb0: frame buffer device [ 1.933584] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 1.940419] input: gpio-keys as /devices/soc0/gpio-keys/input/input2 [ 1.947496] tps6586x-rtc tps6586x-rtc: setting system clock to 2009-01-01 00:00:00 UTC (1230768000) [ 1.961632] vdd_1v5: disabling [ 1.964714] vdd_1v2: disabling [ 2.588103] asix 2-1:1.0 eth0: register 'asix' at usb-c5008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, c0:c1:c0:13:08:60 [ 2.599550] Waiting for root device /dev/mmcblk0p3... [ 58.113675] random: nonblocking pool is initialized
[PYBOOT] [seaboard 01:58]: Timed out waiting for "<type 'str'>":
[PYBOOT] [seaboard 01:59]: got exception: timeout ~$off
[PYBOOT] [seaboard 02:00]: Done. Board seaboard-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
[ 1.607479] vdd_ldo8,avdd_hdmi_pll: supplied by vdd_sm2,vin_ldo* [ 1.613809] vdd_ldo7,avdd_hdmi,vdd_fuse: supplied by vdd_sm2,vin_ldo* [ 1.623797] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 1.630246] tegra-ehci c5000000.usb: EHCI Host Controller [ 1.635659] tegra-ehci c5000000.usb: new USB bus registered, assigned bus number 3 [ 1.643413] tegra-ehci c5000000.usb: irq 287, io mem 0xc5000000 [ 1.658546] tegra-ehci c5000000.usb: USB 2.0 started, EHCI 1.00 [ 1.665037] hub 3-0:1.0: USB hub found [ 1.668876] hub 3-0:1.0: 1 port detected [ 1.673804] mmc2: switch to bus width 8 failed [ 1.682087] mmc2: switch to bus width 4 failed [ 1.686558] mmc2: new high speed MMC card at address 0001 [ 1.692318] mmcblk2: mmc2:0001 MMC08G 7.46 GiB [ 1.697051] mmcblk2boot0: mmc2:0001 MMC08G partition 1 512 KiB [ 1.703067] mmcblk2boot1: mmc2:0001 MMC08G partition 2 512 KiB [ 1.710274] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.716893] [drm] No driver support for vblank timestamp query. [ 1.724133] mmcblk2: p3 [ 1.749912] mmc0: queuing unknown CIS tuple 0x80 (50 bytes) [ 1.757479] mmc0: queuing unknown CIS tuple 0x80 (7 bytes) [ 1.760214] mmc0: queuing unknown CIS tuple 0x80 (7 bytes) [ 1.767152] mmc0: queuing unknown CIS tuple 0x80 (19 bytes) [ 1.785464] mmc0: queuing unknown CIS tuple 0x02 (1 bytes) [ 1.788431] mmc0: new SDIO card at address 0001 [ 1.805802] Console: switching to colour frame buffer device 170x48 [ 1.855325] drm drm: fb0: frame buffer device [ 1.859765] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 1.866103] input: gpio-keys as /devices/soc0/gpio-keys/input/input2 [ 1.872960] tps6586x-rtc tps6586x-rtc: setting system clock to 2009-01-01 00:00:00 UTC (1230768000) [ 1.884597] vdd_1v5: disabling [ 1.887645] vdd_1v2: disabling [ 2.552745] asix 2-1:1.0 eth0: register 'asix' at usb-c5008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, c0:c1:c0:13:08:60 [ 2.563601] Waiting for root device /dev/mmcblk0p3...
[PYBOOT] [seaboard 01:48]: Timed out waiting for "<type 'str'>":
[PYBOOT] [seaboard 01:49]: got exception: timeout ~$off
[PYBOOT] [seaboard 01:50]: Done. Board seaboard-arm-tegra_defconfig failure log: -------------------------------------------------
[ 1.660478] Bluetooth: RFCOMM ver 1.11 [ 1.664291] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 1.669623] Bluetooth: BNEP socket layer initialized [ 1.674612] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 1.680556] Bluetooth: HIDP socket layer initialized [ 1.686142] Key type dns_resolver registered [ 1.691660] Registering SWP/SWPB emulation handler [ 1.707381] tegra-dc 54200000.dc: failed to probe RGB output: -517 [ 1.714181] VDDIO_HDMI: supplied by vdd_5v0 [ 1.718637] vdd_sys: supplied by vdd_5v0 [ 1.722713] vdd_sm2,vin_ldo*: supplied by vdd_sys [ 1.727677] vdd_ldo8,avdd_hdmi_pll: supplied by vdd_sm2,vin_ldo* [ 1.734275] vdd_ldo7,avdd_hdmi,vdd_fuse: supplied by vdd_sm2,vin_ldo* [ 1.744774] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 1.751232] tegra-ehci c5000000.usb: EHCI Host Controller [ 1.757266] tegra-ehci c5000000.usb: new USB bus registered, assigned bus number 3 [ 1.765253] tegra-ehci c5000000.usb: irq 287, io mem 0xc5000000 [ 1.781446] tegra-ehci c5000000.usb: USB 2.0 started, EHCI 1.00 [ 1.789834] hub 3-0:1.0: USB hub found [ 1.793663] hub 3-0:1.0: 1 port detected [ 1.805246] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.811910] [drm] No driver support for vblank timestamp query. [ 1.915524] Console: switching to colour frame buffer device 170x48 [ 1.935304] drm drm: fb0: frame buffer device [ 1.961512] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 1.968908] input: gpio-keys as /devices/soc0/gpio-keys/input/input4 [ 1.976800] tps6586x-rtc tps6586x-rtc: setting system clock to 2009-01-01 00:00:00 UTC (1230768000) [ 1.996856] vdd_1v5: disabling [ 1.999909] vdd_1v2: disabling [ 2.003113] ALSA device list: [ 2.006086] #0: NVIDIA Tegra Seaboard [ 2.322337] asix 2-1:1.0 eth0: register 'asix' at usb-c5008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, c0:c1:c0:13:08:60 [ 2.333613] Waiting for root device /dev/mmcblk0p3...
[PYBOOT] [seaboard 01:45]: Timed out waiting for "<type 'str'>":
[PYBOOT] [seaboard 01:46]: got exception: timeout ~$off
[PYBOOT] [seaboard 01:48]: Done. Board snow-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
[....] Waiting for /dev to be fully populated...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Activating swap...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [ 3.189365] EXT4-fs (mmcblk0p3): warning: mounting fs with errors, running e2fsck is recommended [ 3.197721] EXT4-fs (mmcblk0p3): re-mounted. Opts: (null) [....] Cleaning up temporary files... /tmp[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] Activating lvm and md swap...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Checking file systems...fsck from util-linux 2.20.1 [?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Mounting local filesystems...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Activating swapfile swap...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Cleaning up temporary files...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] Setting kernel variables ...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [ 4.232900] random: dd urandom read with 56 bits of entropy available [....] Configuring network interfaces...Internet Systems Consortium DHCP Client 4.2.2 Copyright 2004-2011 Internet Systems Consortium. All rights reserved. For info, please visit https://www.isc.org/software/dhcp/
Cannot find device "eth0" Bind socket to interface: No such device Failed to bring up eth0. [?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Cleaning up temporary files...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. INIT: Entering runlevel: 2 [[36minfo[39;49m] Using makefile-style concurrent boot in runlevel 2. [....] Starting enhanced syslogd: rsyslogd[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] Starting web server: apache2apache2: Could not reliably determine the server's fully qualified domain name, using 127.0.0.1 for ServerName [?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] Starting periodic command scheduler: cron[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] Loading cpufreq kernel modules...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone (none). [....] Starting system message bus: dbus[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] CPUFreq Utilities: Setting ondemand CPUFreq governor...CPU0...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Starting OpenBSD Secure Shell server: sshd[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c.
[PYBOOT] [snow 03:11]: Timed out waiting for "<type 'str'>":
[PYBOOT] [snow 03:12]: got exception: timeout ~$off
[PYBOOT] [snow 03:13]: Done. Board snowball-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.953979] can: controller area network core (rev 20120528 abi 9) [ 1.960266] NET: Registered protocol family 29 [ 1.964721] can: raw protocol (rev 20120528) [ 1.969024] can: broadcast manager protocol (rev 20120528 t) [ 1.974700] can: netlink gateway (rev 20130117) max_hops=1 [ 1.980773] Key type dns_resolver registered [ 1.985290] ThumbEE CPU extension supported. [ 1.989593] Registering SWP/SWPB emulation handler [ 1.997131] input: gpio_keys as /devices/soc0/gpio_keys/input/input0 [ 2.003967] rtc-pl031 80154000.rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 2.013183] thermal cooling_device0: thermal-cpufreq-0 bind to 0: 0-succeed [ 2.020233] thermal cooling_device0: thermal-cpufreq-0 bind to 1: 0-succeed [ 2.027221] thermal cooling_device0: thermal-cpufreq-0 bind to 2: 0-succeed [ 2.034210] db8500-cpufreq-cooling soc:cpufreq-cooling: Cooling device registered: thermal-cpufreq-0 [ 2.047485] db8500-esram12: disabling [ 2.051330] db8500-esram34: disabling [ 2.055297] V-CSI/DSI: disabling [ 2.058563] mmci-reg: disabling [ 2.062255] uart-pl011 80007000.uart: DMA channel TX dma0chan20 [ 2.068267] uart-pl011 80007000.uart: DMA channel RX dma0chan21 [ 2.074615] Waiting for root device /dev/mmcblk0p4... [ 2.089508] mmc3: new high speed MMC card at address 0001 [ 2.095611] mmcblk3: mmc3:0001 3.53 GiB [ 2.100036] mmcblk3boot0: mmc3:0001 partition 1 2.00 MiB [ 2.105834] mmcblk3boot1: mmc3:0001 partition 2 2.00 MiB [ 2.111633] mmcblk3rpmb: mmc3:0001 partition 3 128 KiB [ 2.118469] mmcblk3: p1 p2 p3 p4 cu: Got hangup signal Connected. cu: waitpid: No child processes Connected.
Disconnected.
[PYBOOT] [snowball 02:23]: Timed out waiting for "<type 'str'>":
[PYBOOT] [snowball 02:24]: got exception: timeout ~$off
[PYBOOT] [snowball 02:25]: Done. Board snowball-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
[ 1.902954] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.910522] ledtrig-cpu: registered to indicate activity on CPUs [ 1.916748] usbcore: registered new interface driver usbhid [ 1.922332] usbhid: USB HID core driver [ 1.929656] NET: Registered protocol family 10 [ 1.984954] sit: IPv6 over IPv4 tunneling driver [ 1.990142] NET: Registered protocol family 17 [ 1.994598] can: controller area network core (rev 20120528 abi 9) [ 2.000823] NET: Registered protocol family 29 [ 2.005279] can: raw protocol (rev 20120528) [ 2.009552] can: broadcast manager protocol (rev 20120528 t) [ 2.015228] can: netlink gateway (rev 20130117) max_hops=1 [ 2.021148] Key type dns_resolver registered [ 2.025604] ThumbEE CPU extension supported. [ 2.079956] input: gpio_keys as /devices/soc0/gpio_keys/input/input0 [ 2.094635] rtc-pl031 80154000.rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 2.103729] thermal cooling_device0: thermal-cpufreq-0 bind to 0: 0-succeed [ 2.110717] thermal cooling_device0: thermal-cpufreq-0 bind to 1: 0-succeed [ 2.117706] thermal cooling_device0: thermal-cpufreq-0 bind to 2: 0-succeed [ 2.124694] db8500-cpufreq-cooling soc:cpufreq-cooling: Cooling device registered: thermal-cpufreq-0 [ 2.136474] db8500-esram12: disabling [ 2.184265] db8500-esram34: disabling [ 2.214019] V-CSI/DSI: disabling [ 2.218231] mmci-reg: disabling [ 2.228881] uart-pl011 80007000.uart: DMA channel TX dma0chan20 [ 2.234832] uart-pl011 80007000.uart: DMA channel RX dma0chan21 [ 2.248992] Waiting for root device /dev/mmcblk0p4... [ 3.045776] mmc3: new high speed MMC card at address 0001 [ 3.059570] mmcblk3: mmc3:0001 3.53 GiB [ 3.063720] mmcblk3boot0: mmc3:0001 partition 1 2.00 MiB [ 3.079254] mmcblk3boot1: mmc3:0001 partition 2 2.00 MiB [ 3.084747] mmcblk3rpmb: mmc3:0001 partition 3 128 KiB [ 3.100555] mmcblk3: p1 p2 p3 p4
[PYBOOT] [snowball 01:56]: Timed out waiting for "<type 'str'>":
[PYBOOT] [snowball 01:57]: got exception: timeout ~$off
[PYBOOT] [snowball 01:58]: Done. Board snowball-arm-u8500_defconfig failure log: -------------------------------------------------
[ 2.651092] ux500-msp-i2s ux500-msp-i2s.1: Failed to get DMA channel capabilities, falling back to period counting: -6 [ 2.661804] snd-soc-mop500 snd-soc-mop500.0: ab8500-codec-dai.0 <-> ux500-msp-i2s.1 mapping ok [ 2.671752] ux500-msp-i2s ux500-msp-i2s.3: Failed to get DMA channel capabilities, falling back to period counting: -6 [ 2.682464] snd-soc-mop500 snd-soc-mop500.0: ab8500-codec-dai.1 <-> ux500-msp-i2s.3 mapping ok [ 2.706085] NET: Registered protocol family 10 [ 2.711669] sit: IPv6 over IPv4 tunneling driver [ 2.717864] NET: Registered protocol family 17 [ 2.722442] NET: Registered protocol family 35 [ 2.727020] NET: Registered protocol family 37 [ 2.731811] Registering SWP/SWPB emulation handler [ 2.738159] coresight-etm3x 801ae000.ptm: PTM 1.0 initialized [ 2.744445] coresight-etm3x 801af000.ptm: PTM 1.0 initialized [ 2.751037] input: gpio_keys as /devices/soc0/gpio_keys/input/input1 [ 2.758087] ab8500-rtc ab8500-rtc.0: setting system clock to 2000-04-17 17:10:51 UTC (955991451) [ 2.767333] thermal cooling_device0: thermal-cpufreq-0 bind to 0: 0-succeed [ 2.774353] thermal cooling_device0: thermal-cpufreq-0 bind to 1: 0-succeed [ 2.781341] thermal cooling_device0: thermal-cpufreq-0 bind to 2: 0-succeed [ 2.788330] db8500-cpufreq-cooling soc:cpufreq-cooling: Cooling device registered: thermal-cpufreq-0 [ 2.801879] db8500-esram12: disabling [ 2.805633] db8500-esram34: disabling [ 2.809570] V-CSI/DSI: disabling [ 2.812866] mmci-reg: disabling [ 2.816162] ALSA device list: [ 2.819122] #0: MOP500-card [ 2.822509] uart-pl011 80007000.uart: DMA channel TX dma0chan24 [ 2.828460] uart-pl011 80007000.uart: DMA channel RX dma0chan25 [ 2.834655] Waiting for root device /dev/mmcblk0p4... cu: Got hangup signal Connected. cu: waitpid: No child processes Connected.
Disconnected.
[PYBOOT] [snowball 01:54]: Timed out waiting for "<type 'str'>":
[PYBOOT] [snowball 01:55]: got exception: timeout ~$off
[PYBOOT] [snowball 01:57]: Done. Board wandboard-arm-imx_v6_v7_defconfig failure log: -------------------------------------------------
INIT: cannot execute "/sbin/getty" I[ 22.453568] mmcblk0: error -110 sending status command, retrying NIT: Id "3" respawning too fast: [ 22.462399] mmcblk0: error -110 sending status command, retrying disabled for 5 minutes [ 22.471259] mmcblk0: error -110 sending status command, aborting INIT: cannot execute "/sbin/getty" [ 22.482400] mmcblk0: error -110 sending status command, retrying [ 22.491083] mmcblk0: error -110 sending status command, retrying [ 22.499534] mmcblk0: error -110 sending status command, aborting [ 22.510516] mmcblk0: error -110 sending status command, retrying [ 22.518972] mmcblk0: error -110 sending status command, retrying [ 22.527719] mmcblk0: error -110 sending status command, aborting INIT: cannot execute "/sbin/getty"INIT: cannot execute "/sbin/getty" INIT: cannot execute "/sbin/getty"INIT: Id "5" respawning to[ 22.547233] mmcblk0: error -110 sending status command, retrying o fast: disabled for 5 minutescan[ 22.555904] mmcblk0: error -110 sending status command, retrying not execute "/sbin/getty" INIT[ 22.564763] mmcblk0: error -110 sending status command, aborting : cannot execute "/sbin/getty" INIT: Id "1" respawning too fas[ 22.576246] mmcblk0: error -110 sending status command, retrying t: disabled for 5 minutes
[ 22.585307] mmcblk0: error -110 sending status command, retrying [ 22.593973] mmcblk0: error -110 sending status command, aborting INIT: INIT: cannot execute "/sb[ 22.605308] mmcblk0: error -110 sending status command, retrying in/getty"cannot execute "/sbin/ge[ 22.614068] mmcblk0: error -110 sending status command, retrying tty" INIT: Id "2" respawning t[ 22.622974] mmcblk0: error -110 sending status command, aborting oo fast: disabled for 5 minutes INIT: Id "6" respawning too fast: disabled for 5 minutes INIT: cannot execute "/sbin/getty" INIT: Id "4" respawning too fast: disabled for 5 minutes INIT: no more processes left in this runlevel [ 50.035067] random: nonblocking pool is initialized
[PYBOOT] [wandboard 02:55]: Timed out waiting for "<type 'str'>":
[PYBOOT] [wandboard 02:56]: got exception: timeout ~$off
[PYBOOT] [wandboard 02:57]: Done.