Full logs are available at http://arm-soc.lixom.net/bootlogs/mainline/v4.7-rc2-333-g3a7c114/
Failed boards:
arndale multi_v7_nosmp_defconfig : NO BUILD bbb multi_v7_nosmp_defconfig : NO BUILD beagleboard-x15 multi_v7_nosmp_defconfig : NO BUILD beaver arm-tegra_defconfig : FAILED 1:48.48 beaver arm-multi_v7_defconfig : FAILED 1:52.61 beaver multi_v7_nosmp_defconfig : NO BUILD capri multi_v7_nosmp_defconfig : NO BUILD colibri-vf61 multi_v7_nosmp_defconfig : NO BUILD colombus multi_v7_nosmp_defconfig : NO BUILD cosmic multi_v7_nosmp_defconfig : NO BUILD cubie multi_v7_nosmp_defconfig : NO BUILD cubie2 multi_v7_nosmp_defconfig : NO BUILD cubox multi_v7_nosmp_defconfig : NO BUILD dalmore multi_v7_nosmp_defconfig : NO BUILD hummingboard multi_v7_nosmp_defconfig : NO BUILD jetsontk1 multi_v7_nosmp_defconfig : NO BUILD minnowmax minnowmax_defconfig : NO BUILD odroidu3 arm-exynos_defconfig : FAILED 1:48.53 omap5uevm arm-omap2plus_defconfig : FAILED 2:05.63 omap5uevm arm-multi_v7_defconfig : FAILED 2:09.91 omap5uevm arm-multi_lpae_defconfig : FAILED 2:23.17 omap5uevm multi_v7_nosmp_defconfig : NO BUILD pandaes multi_v7_nosmp_defconfig : NO BUILD parallella multi_v7_nosmp_defconfig : NO BUILD pi arm-multi_v7_defconfig : FAILED 1:56.04 pi arm-multi_lpae_defconfig : FAILED 1:51.92 pi multi_v7_nosmp_defconfig : NO BUILD pit multi_v7_nosmp_defconfig : NO BUILD rk3288evb multi_v7_nosmp_defconfig : NO BUILD seaboard multi_v7_nosmp_defconfig : NO BUILD snow multi_v7_nosmp_defconfig : NO BUILD snowball multi_v7_nosmp_defconfig : NO BUILD socfpga multi_v7_nosmp_defconfig : NO BUILD trimslice multi_v7_nosmp_defconfig : NO BUILD wandboard multi_v7_nosmp_defconfig : NO BUILD
Successful boards:
apc arm-vt8500_v6_v7_defconfig : passed 1:12.18 arndale arm-exynos_defconfig : passed 1:33.13 arndale arm-multi_v7_defconfig : passed 1:27.35 arndale arm-multi_lpae_defconfig : passed 1:42.30 bbb arm-omap2plus_defconfig : passed 1:39.31 bbb arm-multi_v7_defconfig : passed 1:17.57 beagleboard-x15 arm-omap2plus_defconfig : warnings 0:49.04 beagleboard-x15 arm-multi_v7_defconfig : warnings 0:53.54 beagleboard-x15 arm-multi_lpae_defconfig : warnings 0:57.47 capri arm-bcm_defconfig : passed 0:49.87 capri arm-multi_v7_defconfig : passed 0:59.32 chitra powerpc-pasemi_defconfig : passed 2:07.40 chitra powerpc-ppc64_defconfig : passed 2:58.38 colombus arm-sunxi_defconfig : passed 2:24.39 colombus arm-multi_v7_defconfig : passed 2:38.13 colombus arm-multi_lpae_defconfig : passed 2:37.28 cosmic arm-imx_v6_v7_defconfig : passed 3:25.12 cosmic arm-multi_v7_defconfig : passed 3:15.43 cubie arm-sunxi_defconfig : passed 0:49.01 cubie arm-multi_v7_defconfig : passed 0:56.99 cubie2 arm-sunxi_defconfig : passed 0:49.73 cubie2 arm-multi_v7_defconfig : passed 0:59.06 cubie2 arm-multi_lpae_defconfig : passed 0:55.49 cubox arm-multi_v7_defconfig : passed 1:16.02 cubox arm-mvebu_v7_defconfig : passed 1:30.16 dalmore arm-tegra_defconfig : warnings 1:28.58 dalmore arm-multi_v7_defconfig : warnings 1:32.51 dalmore arm-multi_lpae_defconfig : warnings 1:42.12 jetsontk1 arm-tegra_defconfig : warnings 0:52.67 jetsontk1 arm-multi_v7_defconfig : warnings 0:53.03 jetsontk1 arm-multi_lpae_defconfig : warnings 1:05.31 pandaes arm-omap2plus_defconfig : warnings 1:39.39 pandaes arm-multi_v7_defconfig : passed 2:01.33 parallella arm-multi_v7_defconfig : passed 3:03.96 pi arm-exynos_defconfig : passed 2:14.44 pit arm-exynos_defconfig : passed 2:11.27 pit arm-multi_v7_defconfig : passed 2:21.52 pit arm-multi_lpae_defconfig : passed 2:10.68 seaboard arm-multi_v7_defconfig : warnings 2:26.48 seattle arm64-defconfig : passed 2:30.97 snow arm-exynos_defconfig : passed 2:08.21 snow arm-multi_v7_defconfig : passed 2:02.07 snow arm-multi_lpae_defconfig : passed 2:01.17 snowball arm-u8500_defconfig : passed 1:25.29 snowball arm-multi_v7_defconfig : passed 1:30.17 trimslice arm-tegra_defconfig : warnings 1:36.97 trimslice arm-multi_v7_defconfig : warnings 1:56.72 wandboard arm-imx_v6_v7_defconfig : passed 1:20.30 wandboard arm-multi_v7_defconfig : passed 1:15.66
Offline boards:
colibri-vf61 arm-imx_v6_v7_defconfig : OFFLINE 1:18.95 colibri-vf61 arm-multi_v7_defconfig : OFFLINE 1:25.87 hummingboard arm-imx_v6_v7_defconfig : OFFLINE 2:24.14 hummingboard arm-multi_v7_defconfig : OFFLINE 2:12.01 rk3288evb arm-multi_v7_defconfig : OFFLINE 0:52.34 rk3288evb arm-multi_lpae_defconfig : OFFLINE 0:42.26 sama5 arm-sama5_defconfig : OFFLINE 2:19.86 sama5d3-xplained arm-sama5_defconfig : OFFLINE 2:18.85 seaboard arm-tegra_defconfig : OFFLINE 2:03.99 socfpga arm-socfpga_defconfig : OFFLINE 2:28.39 socfpga arm-multi_v7_defconfig : OFFLINE 2:13.99
Board legend is available at http://arm-soc.lixom.net/boards.html
Last entries of failed logs below:
========================================================================
Board beaver-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 3.413086] pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt [ 3.420043] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt [ 3.426563] pcie_pme 0000:00:01.0:pcie001: service driver pcie_pme loaded [ 3.433511] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 3.439094] r8169 0000:01:00.0: enabling device (0140 -> 0143) [ 3.446117] r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xf09f2000, 02:04:4b:01:60:99, XID 0c900800 IRQ 375 [ 3.456116] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 3.467350] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.473969] [drm] No driver support for vblank timestamp query. [ 3.479907] drm drm: No connectors reported connected with modes [ 3.485913] [drm] Cannot find any crtc or sizes - going 1024x768 [ 3.511537] Console: switching to colour frame buffer device 128x48 [ 3.523698] drm drm: fb0: frame buffer device [ 3.538378] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.549236] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 3.555701] tegra-ehci 7d004000.usb: EHCI Host Controller [ 3.561112] tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1 [ 3.568945] tegra-ehci 7d004000.usb: irq 343, io mem 0x7d004000 [ 3.583389] tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.00 [ 3.590144] hub 1-0:1.0: USB hub found [ 3.593919] hub 1-0:1.0: 1 port detected [ 3.598869] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.604281] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 3.612031] tegra-ehci 7d008000.usb: irq 344, io mem 0x7d008000 [ 3.623384] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.00 [ 3.630046] hub 2-0:1.0: USB hub found [ 3.633813] hub 2-0:1.0: 1 port detected [ 3.642621] tps65910-rtc tps65910-rtc: setting system clock to 2000-01-01 00:00:02 UTC (946684802) [ 3.656304] vdd_sata,avdd_plle: disabling [ 3.661023] usb1_vbus: disabling [ 3.665119] Waiting for root device /dev/mmcblk0p1... [ 3.943389] usb 2-1: new high-speed USB device number 2 using tegra-ehci [ 4.881998] asix 2-1:1.0 eth1: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 58:6d:8f:50:ba:18
[PYBOOT] [beaver 01:49]: Timed out waiting for "<type 'str'>":
[PYBOOT] [beaver 01:50]: got exception: timeout ~$off
[PYBOOT] [beaver 01:52]: Done.
========================================================================
Board beaver-arm-tegra_defconfig failure log: -------------------------------------------------
[ 6.494205] pcie_pme 0000:00:01.0:pcie001: service driver pcie_pme loaded [ 6.501244] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 6.506845] r8169 0000:01:00.0: enabling device (0140 -> 0143) [ 6.514356] r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xf087e000, 02:04:4b:01:60:99, XID 0c900800 IRQ 375 [ 6.524357] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 6.536910] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 6.543529] [drm] No driver support for vblank timestamp query. [ 6.549531] drm drm: No connectors reported connected with modes [ 6.555542] [drm] Cannot find any crtc or sizes - going 1024x768 [ 6.581243] Console: switching to colour frame buffer device 128x48 [ 6.593055] drm drm: fb0: frame buffer device [ 6.620775] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 6.630075] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 6.636551] tegra-ehci 7d004000.usb: EHCI Host Controller [ 6.641985] tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1 [ 6.649955] tegra-ehci 7d004000.usb: irq 343, io mem 0x7d004000 [ 6.670782] tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.00 [ 6.678385] hub 1-0:1.0: USB hub found [ 6.682166] hub 1-0:1.0: 1 port detected [ 6.686968] tegra-ehci 7d008000.usb: EHCI Host Controller [ 6.692394] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 6.700260] tegra-ehci 7d008000.usb: irq 344, io mem 0x7d008000 [ 6.720778] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.00 [ 6.728265] hub 2-0:1.0: USB hub found [ 6.732039] hub 2-0:1.0: 1 port detected [ 6.740254] tps65910-rtc tps65910-rtc: setting system clock to 2000-01-01 00:00:02 UTC (946684802) [ 6.758418] vdd_sata,avdd_plle: disabling [ 6.762836] usb1_vbus: disabling [ 6.766248] ALSA device list: [ 6.769204] #0: NVIDIA Tegra Beaver [ 6.773452] Waiting for root device /dev/mmcblk0p1... [ 7.050788] usb 2-1: new high-speed USB device number 2 using tegra-ehci [ 8.036150] asix 2-1:1.0 eth1: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 58:6d:8f:50:ba:18
[PYBOOT] [beaver 01:45]: Timed out waiting for "<type 'str'>":
[PYBOOT] [beaver 01:46]: got exception: timeout ~$off
[PYBOOT] [beaver 01:47]: Done.
========================================================================
Board odroidu3-arm-exynos_defconfig failure log: -------------------------------------------------
[ 1.799355] Key type dns_resolver registered [ 1.803677] Registering SWP/SWPB emulation handler [ 1.811521] [drm] Exynos DRM: using 12c10000.mixer device for DMA mapping operations [ 1.816236] exynos-drm exynos-drm: bound 12c10000.mixer (ops mixer_component_ops) [ 1.823653] exynos-drm exynos-drm: bound 12d00000.hdmi (ops hdmi_component_ops) [ 1.830805] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.837393] [drm] No driver support for vblank timestamp query. [ 1.843345] [drm] Initialized exynos 1.0.0 20110530 on minor 0 [ 1.849726] s3c-rtc 10070000.rtc: rtc disabled, re-enabling [ 1.854867] s3c-rtc 10070000.rtc: rtc core: registered s3c as rtc1 [ 1.862023] mmc_host mmc1: Bus speed (slot 0) = 44000000Hz (slot req 52000000Hz, actual 44000000HZ div = 0) [ 1.870811] mmc_host mmc1: Bus speed (slot 0) = 73333333Hz (slot req 52000000Hz, actual 36666666HZ div = 1) [ 1.880544] mmc1: new DDR MMC card at address 0001 [ 1.885055] usb 1-3: New USB device found, idVendor=0424, idProduct=3503 [ 1.885062] usb 1-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.899036] hub 1-3:1.0: USB hub found [ 1.902540] hub 1-3:1.0: 3 ports detected [ 1.902544] max98090 1-0010: MAX98090 REVID=0x43 [ 1.912066] mmcblk1: mmc1:0001 008G92 7.28 GiB [ 1.915822] mmcblk1boot0: mmc1:0001 008G92 partition 1 4.00 MiB [ 1.921717] mmcblk1boot1: mmc1:0001 008G92 partition 2 4.00 MiB [ 1.927643] mmcblk1rpmb: mmc1:0001 008G92 partition 3 512 KiB [ 1.933282] max98090 1-0010: use default 2.8v micbias [ 1.934239] mmcblk1: p1 p2 [ 1.947319] asoc-simple-card sound: HiFi <-> 3830000.i2s mapping ok [ 1.950631] input: gpio_keys as /devices/platform/gpio_keys/input/input0 [ 1.987964] max77686-rtc max77686-rtc: setting system clock to 2000-01-01 01:00:19 UTC (946688419) [ 2.004650] VDD10_HDMI_1.0V: disabling [ 2.005341] vdd_g3d: disabling [ 2.006411] BUCK8_2.8V: disabling [ 2.010368] ALSA device list: [ 2.012057] #0: Odroid-U3 [ 2.015708] Waiting for root device /dev/mmcblk0p2...
[PYBOOT] [odroidu3 01:45]: Timed out waiting for "<type 'str'>":
[PYBOOT] [odroidu3 01:46]: got exception: timeout ~$off
[PYBOOT] [odroidu3 01:48]: Done.
========================================================================
Board omap5uevm-arm-multi_lpae_defconfig failure log: -------------------------------------------------
[ 1.933193] mmc0: new high speed MMC card at address 0001 [ 1.939239] mmcblk0: mmc0:0001 SEM04G 3.69 GiB [ 1.944131] mmcblk0boot0: mmc0:0001 SEM04G partition 1 2.00 MiB [ 1.950482] mmcblk0boot1: mmc0:0001 SEM04G partition 2 2.00 MiB [ 1.959780] smps6: Bringing 1350000uV into 1200000-1200000uV [ 1.970224] smps9: Bringing 0uV into 2100000-2100000uV [ 1.978368] ldo1: Bringing 0uV into 1800000-1800000uV [ 1.984984] ldo2: Bringing 0uV into 2800000-2800000uV [ 1.993478] ldo4: Bringing 0uV into 1800000-1800000uV [ 1.998956] smsc95xx 1-3:1.0 eth0: register 'smsc95xx' at usb-4a064c00.ehci-3, smsc95xx USB 2.0 Ethernet, 12:5e:b5:ac:d3:59 [ 2.016525] ldo7: Bringing 0uV into 2000000-2000000uV [ 2.024688] ldo9: bypassed regulator has no supply! [ 2.029805] ldo9: failed to get the current voltage(-517) [ 2.035478] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 2.050757] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 2.074244] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 2.080635] omap-dwc3 4a020000.omap_dwc3: vbus init failed [ 2.107358] smps9: Bringing 0uV into 2100000-2100000uV [ 2.126360] ldo9: bypassed regulator has no supply! [ 2.131475] ldo9: failed to get the current voltage(-517) [ 2.137133] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 2.151657] palmas-rtc 48070000.i2c:palmas@48:rtc: setting system clock to 2000-01-01 00:02:37 UTC (946684957) [ 2.167525] pbias_mmc_omap5: disabling [ 2.171463] vmmcsdio_fixed: disabling [ 2.176013] Waiting for root device /dev/mmcblk1p2... [ 2.248479] usb 1-2: new high-speed USB device number 3 using ehci-omap [ 2.384272] hub 1-2:1.0: USB hub found [ 2.388285] hub 1-2:1.0: 3 ports detected [ 2.394044] omap-dwc3 4a020000.omap_dwc3: vbus init failed [ 2.422389] smps9: Bringing 0uV into 2100000-2100000uV [ 2.441291] ldo9: bypassed regulator has no supply! [ 2.446408] ldo9: failed to get the current voltage(-517) [ 2.452070] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator
[PYBOOT] [omap5uevm 02:20]: Timed out waiting for "<type 'str'>":
[PYBOOT] [omap5uevm 02:21]: got exception: timeout ~$off
[PYBOOT] [omap5uevm 02:22]: Done.
========================================================================
Board omap5uevm-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.932211] smps6: Bringing 1350000uV into 1200000-1200000uV [ 1.942398] mmc0: new high speed MMC card at address 0001 [ 1.947992] smsc95xx 1-3:1.0 eth0: register 'smsc95xx' at usb-4a064c00.ehci-3, smsc95xx USB 2.0 Ethernet, be:07:73:d6:50:c2 [ 1.960012] smps9: Bringing 0uV into 2100000-2100000uV [ 1.965438] mmcblk0: mmc0:0001 SEM04G 3.69 GiB [ 1.970339] mmcblk0boot0: mmc0:0001 SEM04G partition 1 2.00 MiB [ 1.976682] mmcblk0boot1: mmc0:0001 SEM04G partition 2 2.00 MiB [ 1.986147] ldo1: Bringing 0uV into 1800000-1800000uV [ 1.992635] ldo2: Bringing 0uV into 2800000-2800000uV [ 2.000705] ldo4: Bringing 0uV into 1800000-1800000uV [ 2.011820] ldo7: Bringing 0uV into 2000000-2000000uV [ 2.020014] ldo9: bypassed regulator has no supply! [ 2.025131] ldo9: failed to get the current voltage(-517) [ 2.030799] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 2.046114] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 2.069250] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 2.075648] omap-dwc3 4a020000.omap_dwc3: vbus init failed [ 2.102187] smps9: Bringing 0uV into 2100000-2100000uV [ 2.120981] ldo9: bypassed regulator has no supply! [ 2.126104] ldo9: failed to get the current voltage(-517) [ 2.131768] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 2.146222] palmas-rtc 48070000.i2c:palmas@48:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 2.162131] pbias_mmc_omap5: disabling [ 2.166088] vmmcsdio_fixed: disabling [ 2.170630] Waiting for root device /dev/mmcblk1p2... [ 2.178481] usb 1-2: new high-speed USB device number 3 using ehci-omap [ 2.314291] hub 1-2:1.0: USB hub found [ 2.318299] hub 1-2:1.0: 3 ports detected [ 2.324183] omap-dwc3 4a020000.omap_dwc3: vbus init failed [ 2.352210] smps9: Bringing 0uV into 2100000-2100000uV [ 2.370972] ldo9: bypassed regulator has no supply! [ 2.376096] ldo9: failed to get the current voltage(-517) [ 2.381759] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator
[PYBOOT] [omap5uevm 02:07]: Timed out waiting for "<type 'str'>":
[PYBOOT] [omap5uevm 02:08]: got exception: timeout ~$off
[PYBOOT] [omap5uevm 02:09]: Done.
========================================================================
Board omap5uevm-arm-omap2plus_defconfig failure log: -------------------------------------------------
[ 3.907306] ldo9: bypassed regulator has no supply! [ 3.912438] ldo9: failed to get the current voltage(-517) [ 3.918098] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 3.941048] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 3.948498] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 3.955063] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer cd [ 3.961381] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 3.968226] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/ocp/mmc@4809c000[0]' [ 3.977819] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/ocp/mmc@4809c000[0]' [ 3.987310] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 3.994367] omap_hsmmc 4809c000.mmc: lookup for GPIO cd failed [ 4.000492] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer wp [ 4.006784] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 4.013646] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@4809c000[0]' [ 4.023234] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@4809c000[0]' [ 4.032728] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 4.039770] omap_hsmmc 4809c000.mmc: lookup for GPIO wp failed [ 4.079903] omap_hsmmc 480ad000.mmc: GPIO lookup for consumer wp [ 4.086194] omap_hsmmc 480ad000.mmc: using device tree for GPIO lookup [ 4.093055] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@480ad000[0]' [ 4.102643] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@480ad000[0]' [ 4.112130] omap_hsmmc 480ad000.mmc: using lookup tables for GPIO lookup [ 4.119159] omap_hsmmc 480ad000.mmc: lookup for GPIO wp failed [ 4.139842] smps9: Bringing 0uV into 2100000-2100000uV [ 4.168490] ldo9: bypassed regulator has no supply! [ 4.173617] ldo9: failed to get the current voltage(-517) [ 4.179301] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 4.199420] hctosys: unable to open rtc device (rtc0) [ 4.204714] sr_init: No PMIC hook to init smartreflex [ 4.210222] sr_init: platform driver register failed for SR [ 4.237690] pbias_mmc_omap5: disabling [ 4.241647] vmmcsdio_fixed: disabling [ 4.247749] Waiting for root device /dev/mmcblk1p2...
[PYBOOT] [omap5uevm 02:03]: Timed out waiting for "<type 'str'>":
[PYBOOT] [omap5uevm 02:04]: got exception: timeout ~$off
[PYBOOT] [omap5uevm 02:05]: Done.
========================================================================
Board pi-arm-multi_lpae_defconfig failure log: -------------------------------------------------
[ 1.533281] isl29018 7-0044: No cache defaults, reading back from HW [ 1.539632] isl29018 7-0044: Failed to read 1: -6 [ 1.544217] isl29018 7-0044: regmap initialization fails: -6 [ 1.555105] NET: Registered protocol family 10 [ 1.559545] sit: IPv6 over IPv4 tunneling driver [ 1.563119] NET: Registered protocol family 17 [ 1.567123] can: controller area network core (rev 20120528 abi 9) [ 1.573314] NET: Registered protocol family 29 [ 1.577702] can: raw protocol (rev 20120528) [ 1.581951] can: broadcast manager protocol (rev 20120528 t) [ 1.587593] can: netlink gateway (rev 20130117) max_hops=1 [ 1.593315] Key type dns_resolver registered [ 1.597643] ThumbEE CPU extension supported. [ 1.601562] Registering SWP/SWPB emulation handler [ 1.611424] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.616906] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.623273] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.628648] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 1.638746] input: gpio-keys as /devices/platform/gpio-keys/input/input1 [ 1.649090] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.654540] mmc_host mmc0: Bus speed (slot 0) = 200000000Hz (slot req 200000000Hz, actual 200000000HZ div = 0) [ 1.664727] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.670906] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.676283] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 1.686003] max77686-rtc max77802-rtc: hctosys: unable to read the hardware clock [ 1.708597] Waiting for root device /dev/mmcblk0p1... [ 1.712475] mmc0: tuning execution failed: -5 [ 1.716532] mmc0: error -5 whilst initialising MMC card [ 2.583067] asix 1-1:1.0 eth0: register 'asix' at usb-xhci-hcd.2.auto-1, ASIX AX88772 USB 2.0 Ethernet, c8:b3:73:46:fb:95 [ 2.597236] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 2.602697] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 2.609069] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 2.614453] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo
[PYBOOT] [pi 01:49]: Timed out waiting for "<type 'str'>":
[PYBOOT] [pi 01:50]: got exception: timeout ~$off
[PYBOOT] [pi 01:51]: Done.
========================================================================
Board pi-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.533264] isl29018 7-0044: No cache defaults, reading back from HW [ 1.539616] isl29018 7-0044: Failed to read 1: -6 [ 1.544202] isl29018 7-0044: regmap initialization fails: -6 [ 1.555095] NET: Registered protocol family 10 [ 1.559524] sit: IPv6 over IPv4 tunneling driver [ 1.563102] NET: Registered protocol family 17 [ 1.567110] can: controller area network core (rev 20120528 abi 9) [ 1.573300] NET: Registered protocol family 29 [ 1.577688] can: raw protocol (rev 20120528) [ 1.581937] can: broadcast manager protocol (rev 20120528 t) [ 1.587579] can: netlink gateway (rev 20130117) max_hops=1 [ 1.593301] Key type dns_resolver registered [ 1.597621] ThumbEE CPU extension supported. [ 1.601547] Registering SWP/SWPB emulation handler [ 1.611455] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.616934] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.623302] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.628676] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 1.638776] input: gpio-keys as /devices/platform/gpio-keys/input/input1 [ 1.649103] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.654551] mmc_host mmc0: Bus speed (slot 0) = 200000000Hz (slot req 200000000Hz, actual 200000000HZ div = 0) [ 1.664738] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.670917] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.676295] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 1.686033] max77686-rtc max77802-rtc: hctosys: unable to read the hardware clock [ 1.708592] Waiting for root device /dev/mmcblk0p1... [ 1.712467] mmc0: tuning execution failed: -5 [ 1.716526] mmc0: error -5 whilst initialising MMC card [ 2.583062] asix 1-1:1.0 eth0: register 'asix' at usb-xhci-hcd.2.auto-1, ASIX AX88772 USB 2.0 Ethernet, c8:b3:73:46:fb:95 [ 2.597193] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 2.602657] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 2.609029] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 2.614412] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo
[PYBOOT] [pi 01:53]: Timed out waiting for "<type 'str'>":
[PYBOOT] [pi 01:54]: got exception: timeout ~$off
[PYBOOT] [pi 01:55]: Done.