Failed boards:
bbb multi_v7_defconfig : FAILED 3:03.40 beaver multi_v7_defconfig : FAILED 2:58.24 capri multi_v7_defconfig : FAILED 2:57.18 cubie sunxi_defconfig : FAILED 1:04.39 cubie multi_v7_defconfig : FAILED 1:04.82 cubie2 sunxi_defconfig : FAILED 1:00.50 cubie2 multi_v7_defconfig : FAILED 1:00.76 cubie2 multi_lpae_defconfig : FAILED 0:58.63 cubox dove_defconfig : BUILD FAILED dalmore tegra_defconfig : FAILED 1:28.70 dalmore multi_v7_defconfig : FAILED 1:04.43 dalmore multi_lpae_defconfig : FAILED 1:04.34 hummingboard multi_v7_defconfig : FAILED 2:56.57 omap5uevm multi_v7_defconfig : FAILED 3:50.59 omap5uevm multi_lpae_defconfig : FAILED 3:49.02 panda multi_v7_defconfig : FAILED 3:13.25 seaboard multi_v7_defconfig : FAILED 3:06.81 snowball multi_v7_defconfig : FAILED 1:12.07 trimslice multi_v7_defconfig : FAILED 3:03.57 wandboard multi_v7_defconfig : FAILED 3:06.26
Successful boards:
apc vt8500_v6_v7_defconfig : passed 1:21.74 arndale exynos_defconfig : passed 1:11.88 beaver tegra_defconfig : warnings 1:00.02 capri bcm_defconfig : passed 0:43.36 hummingboard imx_v6_v7_defconfig : warnings 1:25.64 omap5uevm omap2plus_defconfig : warnings 1:11.82 panda omap2plus_defconfig : warnings 1:16.16 sama5 sama5_defconfig : passed 1:48.69 seaboard tegra_defconfig : warnings 1:06.41 snow exynos_defconfig : passed 1:30.69 snowball u8500_defconfig : passed 1:23.80 trimslice tegra_defconfig : warnings 1:00.98 wandboard imx_v6_v7_defconfig : warnings 1:04.08
Offline boards:
bbb omap2plus_defconfig : OFFLINE 0:47.07
Board legend is available at http://arm-soc.lixom.net/boards.html
Last entries of failed logs below:
========================================================================
Board bbb-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.191439] usbcore: registered new interface driver usb-storage [ 1.199844] mousedev: PS/2 mouse device common for all mice [ 1.208257] i2c /dev entries driver [ 1.214715] sdhci: Secure Digital Host Controller Interface driver [ 1.221207] sdhci: Copyright(c) Pierre Ossman [ 1.302540] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.309440] usbcore: registered new interface driver usbhid [ 1.315351] usbhid: USB HID core driver [ 1.324451] TCP: cubic registered [ 1.327954] NET: Registered protocol family 17 [ 1.333031] Key type dns_resolver registered [ 1.338458] ThumbEE CPU extension supported. [ 1.343057] Registering SWP/SWPB emulation handler [ 1.348095] PJ4 iWMMXt coprocessor enabled. [ 1.360369] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 1.415145] mmc1: BKOPS_EN bit is not set [ 1.421830] mmc1: new high speed MMC card at address 0001 [ 1.428257] mmcblk0: mmc1:0001 MMC02G 1.78 GiB [ 1.433254] davinci_mdio 4a101000.mdio: davinci mdio revision 1.6 [ 1.439655] davinci_mdio 4a101000.mdio: detected phy mask fffffffe [ 1.446662] mmcblk0boot0: mmc1:0001 MMC02G partition 1 1.00 MiB [ 1.453330] mmcblk0boot1: mmc1:0001 MMC02G partition 2 1.00 MiB [ 1.460745] libphy: 4a101000.mdio: probed [ 1.465081] davinci_mdio 4a101000.mdio: phy[0]: device 4a101000.mdio:00, driver unknown [ 1.474808] Detected MACID = bc:6a:29:7a:42:a8 [ 1.481080] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 1.495279] ALSA device list: [ 1.498417] No soundcards found. [ 1.503332] mmcblk0: p1 p2 [ 1.509181] mmcblk0boot1: unknown partition table [ 1.516277] mmcblk0boot0: unknown partition table [ 1.523463] EXT4-fs (mmcblk0p2): couldn't mount as ext3 due to feature incompatibilities [ 1.533255] EXT4-fs (mmcblk0p2): couldn't mount as ext2 due to feature incompatibilities [ 1.591336] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) [ 1.599949] VFS: Mounted root (ext4 filesystem) on device 179:2. [ 1.626003] devtmpfs: mounted [ 1.630127] Freeing unused kernel memory: 544K (c0a4f000 - c0ad7000) [ 1.704816] Internal error: Oops - undefined instruction: 0 [#1] SMP ARM ~$off # PYBOOT: Exception: timeout
========================================================================
Board beaver-multi_v7_defconfig failure log: -------------------------------------------------
[ 5.294632] [<c050f640>] (bus_for_each_drv) from [<c0510e34>] (device_attach+0x74/0x88) [ 5.302623] [<c0510e34>] (device_attach) from [<c05104dc>] (bus_probe_device+0x84/0xa8) [ 5.310627] [<c05104dc>] (bus_probe_device) from [<c0510918>] (deferred_probe_work_func+0x68/0x98) [ 5.319582] [<c0510918>] (deferred_probe_work_func) from [<c025a224>] (process_one_work+0x10c/0x37c) [ 5.328713] [<c025a224>] (process_one_work) from [<c025af44>] (worker_thread+0x13c/0x404) [ 5.336892] [<c025af44>] (worker_thread) from [<c0260644>] (kthread+0xd8/0xf0) [ 5.344116] [<c0260644>] (kthread) from [<c020e678>] (ret_from_fork+0x14/0x3c) [ 5.351321] ---[ end trace 475f0827080dbe97 ]--- [ 5.355949] host1x drm: No connectors reported connected with modes [ 5.362205] [drm] Cannot find any crtc or sizes - going 1024x768 [ 5.382163] Console: switching to colour frame buffer device 128x48 [ 5.393911] host1x drm: fb0: frame buffer device [ 5.398602] host1x drm: registered panic notifier [ 5.403305] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 5.409522] platform 7d004000.usb: Driver tegra-ehci requests probe deferral [ 5.416920] platform 7d008000.usb: Driver tegra-ehci requests probe deferral [ 5.428293] tegra-ehci 7d004000.usb: EHCI Host Controller [ 5.433705] tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1 [ 5.441491] tegra-ehci 7d004000.usb: irq 53, io mem 0x7d004000 [ 5.463068] tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.00 [ 5.469447] hub 1-0:1.0: USB hub found [ 5.473227] hub 1-0:1.0: 1 port detected [ 5.477569] tegra-ehci 7d008000.usb: EHCI Host Controller [ 5.482971] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 5.490780] tegra-ehci 7d008000.usb: irq 129, io mem 0x7d008000 [ 5.513066] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.00 [ 5.519346] hub 2-0:1.0: USB hub found [ 5.523121] hub 2-0:1.0: 1 port detected [ 5.531004] tps65910-rtc tps65910-rtc: setting system clock to 2000-01-01 00:00:04 UTC (946684804) [ 5.543975] ALSA device list: [ 5.546942] #0: NVIDIA Tegra Beaver [ 5.553137] EXT4-fs (mmcblk0p1): couldn't mount as ext3 due to feature incompatibilities [ 5.562027] EXT4-fs (mmcblk0p1): couldn't mount as ext2 due to feature incompatibilities [ 5.576956] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 5.585083] VFS: Mounted root (ext4 filesystem) readonly on device 179:1. [ 5.612471] devtmpfs: mounted [ 5.615914] Freeing unused kernel memory: 544K (c0a4f000 - c0ad7000) [ 5.666665] Internal error: Oops - undefined instruction: 0 [#1] SMP ARM ~$off # PYBOOT: Exception: timeout
========================================================================
Board capri-multi_v7_defconfig failure log: -------------------------------------------------
[ 0.930000] mmcblk0boot1: unknown partition table [ 0.940000] mmcblk0boot0: unknown partition table [ 0.990000] EXT4-fs (mmcblk0p8): mounted filesystem with ordered data mode. Opts: (null) [ 1.000000] VFS: Mounted root (ext4 filesystem) readonly on device 179:8. [ 1.000000] devtmpfs: mounted [ 1.010000] Freeing unused kernel memory: 544K (c0a4f000 - c0ad7000) [ 1.030000] Internal error: Oops - undefined instruction: 0 [#1] SMP ARM [ 1.030000] Alignment trap: not handling instruction e1923f9f at [<c07bb9fc>] [ 1.030000] Unhandled fault: alignment exception (0x001) at 0x20736eae [ 1.030000] Internal error: : 1 [#2] SMP ARM [ 1.030000] Modules linked in: [ 1.030000] CPU: 0 PID: 29042 Comm: %s [ 1.030000] Not tainted 3.14.0-rc7-next-20140320 #1 [ 1.030000] task: c0991b20 ti: ed83a000 task.ti: 70737573 [ 1.030000] PC is at _raw_spin_lock_irqsave+0x14/0x4c [ 1.030000] LR is at __down_read_trylock+0x14/0x54 [ 1.030000] pc : [<c07bba00>] lr : [<c027d1dc>] psr: 40000193 [ 1.030000] sp : ed83bed8 ip : c0ae4388 fp : ed83bfc0 [ 1.030000] r10: 00000028 r9 : 20736eaa r8 : 0000017c [ 1.030000] r7 : c0991b20 r6 : 00000017 r5 : 20736eae r4 : 20736eaa [ 1.030000] r3 : 00000193 r2 : 20736eae r1 : 00000000 r0 : 40000193 [ 1.030000] Flags: nZcv IRQs off FIQs on Mode SVC_32 ISA ARM Segment user [ 1.030000] Control: 10c5387d Table: bdbec04a DAC: 00000015 [ 1.030000] Process %s [ 1.030000] (pid: 29042, stack limit = 0x707377c3) [ 1.030000] Stack: (0xed83bed8 to 0x70739573) [ 1.030000] [<c07bba00>] (_raw_spin_lock_irqsave) from [<c027d1dc>] (__down_read_trylock+0x14/0x54) [ 1.030000] [<c027d1dc>] (__down_read_trylock) from [<c0217dcc>] (do_page_fault+0x78/0x27c) [ 1.030000] [<c0217dcc>] (do_page_fault) from [<c02083d4>] (do_DataAbort+0x38/0x98) [ 1.030000] [<c02083d4>] (do_DataAbort) from [<c0212258>] (__dabt_svc+0x38/0x60) [ 1.030000] Exception stack(0xed83bfc0 to 0xed83c008) [ 1.030000] bfc0: 0000017c 00000017 ed83c000 00000193 ed83c008 c0217d54 00000017 00000000 [ 1.030000] bfe0: 0000017c 00000000 ed85a000 ed83c0e0 c0ae4388 ed83c008 c02083d4 c0217d80 [ 1.030000] c000: 00000193 ffffffff [ 1.030000] Code: e10f0000 f10c0080 f592f000 e1923f9f (e2831801) [ 1.030000] ---[ end trace 2db66365600be178 ]--- [ 1.030000] Alignment trap: not handling instruction e1923f9f at [<c07bb9fc>] [ 1.030000] Unhandled fault: alignment exception (0x001) at 0x20736eae ~$off # PYBOOT: Exception: timeout
========================================================================
Board cubie-multi_v7_defconfig failure log: -------------------------------------------------
tftp 0x40008000 next/next-20140320/multi_v7_defconfig/zImage Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.140 Filename 'next/next-20140320/multi_v7_defconfig/zImage'. Load address: 0x40008000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ##################################################### 2.8 MiB/s done Bytes transferred = 4584720 (45f510 hex) sun4i#setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 sun4i#tftp 0x41000000 next/next-20140320/multi_v7_defconfig/dtbs/sun4i-a10-cubieboard.dtb tftp 0x41000000 next/next-20140320/multi_v7_defconfig/dtbs/sun4i-a10-cubieboard.dtb Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.140 Filename 'next/next-20140320/multi_v7_defconfig/dtbs/sun4i-a10-cubieboard.dtb'. Load address: 0x41000000 Loading: *## 2.9 MiB/s done Bytes transferred = 15184 (3b50 hex) sun4i#printenv bootargs printenv bootargsnode: cubie status: on
bootargs=console=ttyS0,115200n8 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/cubie ip=dhcp sun4i#bootz 0x40008000 - 0x41000000 bootz 0x40008000 - 0x41000000 Kernel image @ 0x40008000 [ 0x000000 - 0x45f510 ] ## Flattened Device Tree blob at 41000000 Booting using the fdt blob at 0x41000000 Loading Device Tree to 40ff9000, end 40fffb4f ... OK
Starting kernel ...
~$off # PYBOOT: Exception: timeout
========================================================================
Board cubie-sunxi_defconfig failure log: -------------------------------------------------
DHCP client bound to address 172.16.1.140 sun4i#setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 sun4i#tftp 0x40008000 next/next-20140320/sunxi_defconfig/zImage tftp 0x40008000 next/next-20140320/sunxi_defconfig/zImage Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.140 Filename 'next/next-20140320/sunxi_defconfig/zImage'. Load address: 0x40008000 Loading: *################################################################# ########################################################## 2.5 MiB/s done Bytes transferred = 1802016 (1b7f20 hex) sun4i#setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 sun4i#tftp 0x41000000 next/next-20140320/sunxi_defconfig/dtbs/sun4i-a10-cubieboard.dtb tftp 0x41000000 next/next-20140320/sunxi_defconfig/dtbs/sun4i-a10-cubieboard.dtb Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.140 Filename 'next/next-20140320/sunxi_defconfig/dtbs/sun4i-a10-cubieboard.dtb'. Load address: 0x41000000 Loading: *## 2.4 MiB/s done Bytes transferred = 15184 (3b50 hex) sun4i#printenv bootargs printenv bootargs bootargs=console=ttyS0,115200n8 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/cubie ip=dhcp sun4i#bootz 0x40008000 - 0x41000000 bootz 0x40008000 - 0x41000000 Kernel image @ 0x40008000 [ 0x000000 - 0x1b7f20 ] ## Flattened Device Tree blob at 41000000 Booting using the fdt blob at 0x41000000 Loading Device Tree to 40ff9000, end 40fffb4f ... OK
Starting kernel ...
~$off # PYBOOT: Exception: timeout
========================================================================
Board cubie2-multi_lpae_defconfig failure log: -------------------------------------------------
sun7i# tftp 0x40008000 next/next-20140320/multi_lpae_defconfig/zImage tftp 0x40008000 next/next-20140320/multi_lpae_defconfig/zImage Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.156 Filename 'next/next-20140320/multi_lpae_defconfig/zImage'. Load address: 0x40008000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ###################################################### 3.9 MiB/s done Bytes transferred = 4609160 (465488 hex) sun7i# setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 sun7i# tftp 0x41000000 next/next-20140320/multi_lpae_defconfig/dtbs/sun7i-a20-cubieboard2.dtb tftp 0x41000000 next/next-20140320/multi_lpae_defconfig/dtbs/sun7i-a20-cubieboard2.dtb Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.156 Filename 'next/next-20140320/multi_lpae_defconfig/dtbs/sun7i-a20-cubieboard2.dtb'. Load address: 0x41000000 Loading: *## 3.5 MiB/s done Bytes transferred = 18209 (4721 hex) sun7i#printenv bootargs printenv bootargs bootargs=console=ttyS0,115200n8 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/cubie2 ip=dhcp sun7i# bootz 0x40008000 - 0x41000000 bootz 0x40008000 - 0x41000000 Kernel image @ 0x40008000 [ 0x000000 - 0x465488 ] ## Flattened Device Tree blob at 41000000 Booting using the fdt blob at 0x41000000 Loading Device Tree to 40ff8000, end 40fff720 ... OK
Starting kernel ...
~$off # PYBOOT: Exception: timeout
========================================================================
Board cubie2-multi_v7_defconfig failure log: -------------------------------------------------
tftp 0x40008000 next/next-20140320/multi_v7_defconfig/zImage Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.156 Filename 'next/next-20140320/multi_v7_defconfig/zImage'. Load address: 0x40008000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ##################################################### 4 MiB/s done Bytes transferred = 4584720 (45f510 hex) sun7i# setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 sun7i# tftp 0x41000000 next/next-20140320/multi_v7_defconfig/dtbs/sun7i-a20-cubieboard2.dtb tftp 0x41000000 next/next-20140320/multi_v7_defconfig/dtbs/sun7i-a20-cubieboard2.dtb Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.156 Filename 'next/next-20140320/multi_v7_defconfig/dtbs/sun7i-a20-cubieboard2.dtb'. Load address: 0x41000000 Loading: *## 3.5 MiB/s done Bytes transferred = 18209 (4721 hex) sun7i# printenv bootargs printenv bootargs bootargs=console=ttyS0,115200n8 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/cubie2 ip=dhcp sun7i# bootz 0x40008000 - 0x41000000 bootz 0x40008000 - 0x41000000 Kernel image @ 0x40008000 [ 0x000000 - 0x45f510 ] ## Flattened Device Tree blob at 41000000 Booting using the fdt blob at 0x41000000 Loading Device Tree to 40ff8000, end 40fff720 ... OK
Starting kernel ...
node: cubie2 status: on ~$off # PYBOOT: Exception: timeout
========================================================================
Board cubie2-sunxi_defconfig failure log: -------------------------------------------------
DHCP client bound to address 172.16.1.156 sun7i# setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 sun7i# tftp 0x40008000 next/next-20140320/sunxi_defconfig/zImage tftp 0x40008000 next/next-20140320/sunxi_defconfig/zImage Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.156 Filename 'next/next-20140320/sunxi_defconfig/zImage'. Load address: 0x40008000 Loading: *################################################################# ########################################################## 4 MiB/s done Bytes transferred = 1802016 (1b7f20 hex) sun7i# setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 sun7i# tftp 0x41000000 next/next-20140320/sunxi_defconfig/dtbs/sun7i-a20-cubieboard2.dtb tftp 0x41000000 next/next-20140320/sunxi_defconfig/dtbs/sun7i-a20-cubieboard2.dtb Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.156 Filename 'next/next-20140320/sunxi_defconfig/dtbs/sun7i-a20-cubieboard2.dtb'. Load address: 0x41000000 Loading: *## 683.6 KiB/s done Bytes transferred = 18209 (4721 hex) sun7i# printenv bootargs printenv bootargs bootargs=console=ttyS0,115200n8 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/cubie2 ip=dhcp sun7i# bootz 0x40008000 - 0x41000000 bootz 0x40008000 - 0x41000000 Kernel image @ 0x40008000 [ 0x000000 - 0x1b7f20 ] ## Flattened Device Tree blob at 41000000 Booting using the fdt blob at 0x41000000 Loading Device Tree to 40ff8000, end 40fff720 ... OK
Starting kernel ...
~$off # PYBOOT: Exception: timeout
========================================================================
Board dalmore-multi_lpae_defconfig failure log: -------------------------------------------------
Tegra114 (Dalmore) #tftp 0x82000000 next/next-20140320/multi_lpae_defconfig/zImage tftp 0x82000000 next/next-20140320/multi_lpae_defconfig/zImage Using asx0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.129 Filename 'next/next-20140320/multi_lpae_defconfig/zImage'. Load address: 0x82000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ###################################################### 2.7 MiB/s done Bytes transferred = 4609160 (465488 hex) Tegra114 (Dalmore) #setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 Tegra114 (Dalmore) # tftp 0x83000000 next/next-20140320/multi_lpae_defconfig/dtbs/tegra114-dalmore.dtb tftp 0x83000000 next/next-20140320/multi_lpae_defconfig/dtbs/tegra114-dalmore.dtb Using asx0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.129 Filename 'next/next-20140320/multi_lpae_defconfig/dtbs/tegra114-dalmore.dtb'. Load address: 0x83000000 Loading: *### 2.7 MiB/s done Bytes transferred = 34067 (8513 hex) Tegra114 (Dalmore) # printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 root=/dev/mmcblk0p1 rootwait debug earlyprintk Tegra114 (Dalmore) # bootz 0x82000000 - 0x83000000 bootz 0x82000000 - 0x83000000 Kernel image @ 0x82000000 [ 0x000000 - 0x465488 ] ## Flattened Device Tree blob at 83000000 Booting using the fdt blob at 0x83000000 Loading Device Tree to 8fff4000, end 8ffff512 ... OK
Starting kernel ...
~$off # PYBOOT: Exception: timeout
========================================================================
Board dalmore-multi_v7_defconfig failure log: -------------------------------------------------
Tegra114 (Dalmore) # tftp 0x82000000 next/next-20140320/multi_v7_defconfig/zImage tftp 0x82000000 next/next-20140320/multi_v7_defconfig/zImage Using asx0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.129 Filename 'next/next-20140320/multi_v7_defconfig/zImage'. Load address: 0x82000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ##################################################### 2.8 MiB/s done Bytes transferred = 4584720 (45f510 hex) Tegra114 (Dalmore) # setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 Tegra114 (Dalmore) # tftp 0x83000000 next/next-20140320/multi_v7_defconfig/dtbs/tegra114-dalmore.dtb tftp 0x83000000 next/next-20140320/multi_v7_defconfig/dtbs/tegra114-dalmore.dtb Using asx0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.129 Filename 'next/next-20140320/multi_v7_defconfig/dtbs/tegra114-dalmore.dtb'. Load address: 0x83000000 Loading: *### 2.5 MiB/s done Bytes transferred = 34067 (8513 hex) Tegra114 (Dalmore) # printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 root=/dev/mmcblk0p1 rootwait debug earlyprintk Tegra114 (Dalmore) # bootz 0x82000000 - 0x83000000 bootz 0x82000000 - 0x83000000 Kernel image @ 0x82000000 [ 0x000000 - 0x45f510 ] ## Flattened Device Tree blob at 83000000 Booting using the fdt blob at 0x83000000 Loading Device Tree to 8fff4000, end 8ffff512 ... OK
Starting kernel ...
~$off # PYBOOT: Exception: timeout
========================================================================
Board dalmore-tegra_defconfig failure log: -------------------------------------------------
[ 1.066733] avdd-usb: 3300 mV [ 1.068719] avdd-usb: supplied by vdd-sys-5v0 [ 1.074913] rail-3v3: no parameters [ 1.078824] rail-5v0: no parameters [ 1.082401] REGEN3: no parameters [ 1.085324] SYSEN1: no parameters [ 1.088832] SYSEN2: no parameters [ 1.094152] Linux video capture interface: v2.00 [ 1.100570] platform 70019010.iommu: Driver tegra-smmu requests probe deferral [ 1.107517] Advanced Linux Sound Architecture Driver Initialized. [ 1.117208] Bluetooth: Core ver 2.19 [ 1.119319] NET: Registered protocol family 31 [ 1.123489] Bluetooth: HCI device and connection manager initialized [ 1.130012] Bluetooth: HCI socket layer initialized [ 1.134895] Bluetooth: L2CAP socket layer initialized [ 1.140216] Bluetooth: SCO socket layer initialized [ 1.147543] cfg80211: Calling CRDA to update world regulatory domain [ 1.154432] Switched to clocksource arch_sys_counter [ 1.242525] NET: Registered protocol family 2 [ 1.248959] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 1.254629] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 1.261342] TCP: Hash tables configured (established 8192 bind 8192) [ 1.268817] TCP: reno registered [ 1.270437] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 1.276591] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 1.284088] NET: Registered protocol family 1 [ 1.289759] RPC: Registered named UNIX socket transport module. [ 1.293886] RPC: Registered udp transport module. [ 1.298828] RPC: Registered tcp transport module. [ 1.303419] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.309997] PCI: CLS 0 bytes, default 64 [ 1.329542] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 1.338007] bounce pool size: 64 pages [ 1.345446] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.352353] msgmni has been set to 1468 [ 1.360995] io scheduler noop registered (default) [ 1.393427] tegra114-pinctrl 70000868.pinmux: Config param 000e not supported on group drive_gma [ 1.400483] tegra114-pinctrl 70000868.pinmux: pin_config_group_set op failed for group 199 [ 1.408809] tegra114-pinctrl 70000868.pinmux: Error applying setting, re~$off # PYBOOT: Exception: timeout
========================================================================
Board hummingboard-multi_v7_defconfig failure log: -------------------------------------------------
[ 0.985245] hub 1-0:1.0: 1 port detected [ 0.990397] ci_hdrc ci_hdrc.1: doesn't support gadget [ 0.995504] ci_hdrc ci_hdrc.1: EHCI Host Controller [ 1.000424] ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 2 [ 1.025296] ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00 [ 1.031416] hub 2-0:1.0: USB hub found [ 1.035211] hub 2-0:1.0: 1 port detected [ 1.039915] mousedev: PS/2 mouse device common for all mice [ 1.047465] i2c /dev entries driver [ 1.053293] sdhci: Secure Digital Host Controller Interface driver [ 1.059523] sdhci: Copyright(c) Pierre Ossman [ 1.064585] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.071152] sdhci-esdhc-imx 2194000.usdhc: could not get ultra high speed state, work on normal mode [ 1.080343] mmc0: no vqmmc regulator found [ 1.125304] mmc0: SDHCI controller on 2194000.usdhc [2194000.usdhc] using ADMA [ 1.133265] usbcore: registered new interface driver usbhid [ 1.138882] usbhid: USB HID core driver [ 1.149360] TCP: cubic registered [ 1.152717] NET: Registered protocol family 17 [ 1.157397] Key type dns_resolver registered [ 1.161791] ThumbEE CPU extension supported. [ 1.166117] Registering SWP/SWPB emulation handler [ 1.170917] PJ4 iWMMXt coprocessor enabled. [ 1.178588] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 1.193736] ALSA device list: [ 1.196793] No soundcards found. [ 1.200853] Waiting for root device /dev/mmcblk0p2... [ 1.252909] mmc0: host does not support reading read-only switch. assuming write-enable. [ 1.267044] mmc0: new high speed SDHC card at address b368 [ 1.272907] mmcblk0: mmc0:b368 00000 7.51 GiB [ 1.278875] mmcblk0: p1 p2 [ 1.316637] EXT4-fs (mmcblk0p2): couldn't mount as ext3 due to feature incompatibilities [ 1.325731] EXT4-fs (mmcblk0p2): couldn't mount as ext2 due to feature incompatibilities [ 1.347714] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) [ 1.355873] VFS: Mounted root (ext4 filesystem) readonly on device 179:2. [ 1.371895] devtmpfs: mounted [ 1.375259] Freeing unused kernel memory: 544K (c0a4f000 - c0ad7000) [ 1.422410] Internal error: Oops - undefined instruction: 0 [#1] SMP ARM ~$off # PYBOOT: Exception: timeout
========================================================================
Board omap5uevm-multi_lpae_defconfig failure log: -------------------------------------------------
[ 46.690021] smps7: 1800 mV [ 46.694228] smps8: 600 <--> 1310 mV at 1040 mV [ 46.700212] smps9: 2100 mV [ 46.704038] smps10_out2: 5000 mV [ 46.708272] smps10_out1: 5000 mV [ 46.712142] ldo1: 1500 <--> 1800 mV [ 46.716750] ldo2: 2800 mV [ 46.721091] ldo3: 1500 mV [ 46.724536] ldo4: 1500 <--> 1800 mV [ 46.729772] ldo5: 1800 mV [ 46.735595] ldo6: 1200 mV [ 46.739289] ldo7: 2000 mV [ 46.743629] ldo8: 3000 mV [ 46.747832] ldo9: 1800 <--> 3000 mV at 900 mV [ 46.753976] ldoln: 1800 mV [ 46.758394] ldousb: 3250 mV [ 46.761892] REGEN1: no parameters [ 46.765444] REGEN2: no parameters [ 46.769159] regen3: no parameters [ 46.772949] SYSEN1: no parameters [ 46.776500] SYSEN2: no parameters [ 47.018701] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 47.025814] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 47.033119] omap_hsmmc 4809c000.mmc: pins are not configured from the driver [ 47.078781] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 47.092236] ALSA device list: [ 47.095367] No soundcards found. [ 47.099395] Waiting for root device /dev/mmcblk1p2... [ 47.135273] mmc2: host does not support reading read-only switch. assuming write-enable. [ 47.145491] mmc2: new high speed SDHC card at address 0001 [ 47.151462] mmcblk1: mmc2:0001 00000 14.6 GiB [ 47.156941] mmcblk1: p1 p2 [ 47.208929] EXT4-fs (mmcblk1p2): couldn't mount as ext3 due to feature incompatibilities [ 47.217777] EXT4-fs (mmcblk1p2): couldn't mount as ext2 due to feature incompatibilities [ 47.242418] EXT4-fs (mmcblk1p2): mounted filesystem with ordered data mode. Opts: (null) [ 47.250888] VFS: Mounted root (ext4 filesystem) readonly on device 179:50. [ 47.266062] devtmpfs: mounted [ 47.269449] Freeing unused kernel memory: 552K (c0a57000 - c0ae1000) ~$off # PYBOOT: Exception: timeout
========================================================================
Board omap5uevm-multi_v7_defconfig failure log: -------------------------------------------------
[ 47.579795] smps7: 1800 mV [ 47.583986] smps8: 600 <--> 1310 mV at 1040 mV [ 47.589937] smps9: 2100 mV [ 47.593760] smps10_out2: 5000 mV [ 47.597963] smps10_out1: 5000 mV [ 47.601816] ldo1: 1500 <--> 1800 mV [ 47.606409] ldo2: 2800 mV [ 47.610753] ldo3: 1500 mV [ 47.614204] ldo4: 1500 <--> 1800 mV [ 47.619462] ldo5: 1800 mV [ 47.625278] ldo6: 1200 mV [ 47.628978] ldo7: 2000 mV [ 47.633306] ldo8: 3000 mV [ 47.637493] ldo9: 1800 <--> 3000 mV at 900 mV [ 47.643652] ldoln: 1800 mV [ 47.648060] ldousb: 3250 mV [ 47.651559] REGEN1: no parameters [ 47.655104] REGEN2: no parameters [ 47.658815] regen3: no parameters [ 47.662594] SYSEN1: no parameters [ 47.666136] SYSEN2: no parameters [ 47.908845] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 47.915948] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 47.923252] omap_hsmmc 4809c000.mmc: pins are not configured from the driver [ 47.968931] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 47.982448] ALSA device list: [ 47.985579] No soundcards found. [ 47.989600] Waiting for root device /dev/mmcblk1p2... [ 48.025405] mmc2: host does not support reading read-only switch. assuming write-enable. [ 48.035619] mmc2: new high speed SDHC card at address 0001 [ 48.041580] mmcblk1: mmc2:0001 00000 14.6 GiB [ 48.047054] mmcblk1: p1 p2 [ 48.099076] EXT4-fs (mmcblk1p2): couldn't mount as ext3 due to feature incompatibilities [ 48.107930] EXT4-fs (mmcblk1p2): couldn't mount as ext2 due to feature incompatibilities [ 48.132575] EXT4-fs (mmcblk1p2): mounted filesystem with ordered data mode. Opts: (null) [ 48.141060] VFS: Mounted root (ext4 filesystem) readonly on device 179:50. [ 48.156239] devtmpfs: mounted [ 48.159613] Freeing unused kernel memory: 544K (c0a4f000 - c0ad7000) ~$off # PYBOOT: Exception: timeout
========================================================================
Board panda-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.741119] VPP: 1800 <--> 2500 mV at 1900 mV [ 1.746551] VUSIM: 1200 <--> 2900 mV at 1800 mV [ 1.751556] VDAC: 1800 mV [ 1.752014] VANA: 2100 mV [ 1.758819] VCXIO: 1800 mV [ 1.761749] VUSB: 3300 mV [ 1.765716] V1V8: 1800 mV [ 1.769256] V2V1: 2100 mV [ 1.775299] omap_i2c 48070000.i2c: bus 0 rev0.11 at 400 kHz [ 1.849060] usb 1-1: new high-speed USB device number 2 using ehci-omap [ 2.060089] hub 1-1:1.0: USB hub found [ 2.064178] hub 1-1:1.0: 5 ports detected [ 2.118865] omap_i2c 48072000.i2c: bus 1 rev0.11 at 400 kHz [ 2.359191] usb 1-1.1: new high-speed USB device number 3 using ehci-omap [ 2.421173] omap_i2c 48060000.i2c: bus 2 rev0.11 at 100 kHz [ 2.501586] smsc95xx v1.0.4 [ 2.563293] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-4a064c00.ehci-1.1, smsc95xx USB 2.0 Ethernet, 02:b8:ed:de:58:b0 [ 2.728637] omap_i2c 48350000.i2c: bus 3 rev0.11 at 400 kHz [ 2.736663] omap_hsmmc 4809c000.mmc: pins are not configured from the driver [ 4.749664] gic_timer_retrigger: lost localtimer interrupt [ 4.870330] twl_rtc rtc.11: setting system clock to 2000-01-01 00:00:03 UTC (946684803) [ 4.884704] ALSA device list: [ 4.887908] No soundcards found. [ 4.891937] Waiting for root device /dev/mmcblk0p2... [ 4.904998] mmc0: host does not support reading read-only switch. assuming write-enable. [ 4.915527] mmc0: new high speed SDHC card at address b368 [ 4.921661] mmcblk0: mmc0:b368 00000 7.51 GiB [ 4.928192] mmcblk0: p1 p2 [ 4.936279] omap_hsmmc 480d5000.mmc: card claims to support voltages below defined range [ 4.954895] mmc1: queuing unknown CIS tuple 0x91 (3 bytes) [ 4.961639] mmc1: new SDIO card at address 0001 [ 5.002044] EXT4-fs (mmcblk0p2): couldn't mount as ext3 due to feature incompatibilities [ 5.011505] EXT4-fs (mmcblk0p2): couldn't mount as ext2 due to feature incompatibilities [ 5.033905] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) [ 5.033905] VFS: Mounted root (ext4 filesystem) readonly on device 179:2. [ 5.058258] devtmpfs: mounted [ 5.061401] Freeing unused kernel memory: 544K (c0a4f000 - c0ad7000) [ 5.109741] Internal error: Oops - undefined instruction: 0 [#1] SMP ARM ~$off # PYBOOT: Exception: timeout
========================================================================
Board seaboard-multi_v7_defconfig failure log: -------------------------------------------------
[ 4.934613] [<c04d9a44>] (drm_fb_helper_initial_config) from [<c04f5864>] (tegra_drm_fb_init+0x9c/0x110) [ 4.944097] [<c04f5864>] (tegra_drm_fb_init) from [<c04f4568>] (tegra_drm_load+0xa0/0xc0) [ 4.952282] [<c04f4568>] (tegra_drm_load) from [<c04e233c>] (drm_dev_register+0xa8/0x104) [ 4.960454] [<c04e233c>] (drm_dev_register) from [<c04f4138>] (drm_host1x_init+0x30/0x8c) [ 4.968637] [<c04f4138>] (drm_host1x_init) from [<c0504894>] (host1x_subdev_register+0xb4/0xd0) [ 4.977339] [<c0504894>] (host1x_subdev_register) from [<c0504e40>] (host1x_client_register+0xf8/0x11c) [ 4.986735] [<c0504e40>] (host1x_client_register) from [<c04f8598>] (tegra_dc_probe+0x154/0x290) [ 4.995526] [<c04f8598>] (tegra_dc_probe) from [<c051272c>] (platform_drv_probe+0x18/0x48) [ 5.003910] [<c051272c>] (platform_drv_probe) from [<c0510f88>] (driver_probe_device+0x124/0x240) [ 5.012808] [<c0510f88>] (driver_probe_device) from [<c050f640>] (bus_for_each_drv+0x58/0x8c) [ 5.021316] [<c050f640>] (bus_for_each_drv) from [<c0510e34>] (device_attach+0x74/0x88) [ 5.029321] [<c0510e34>] (device_attach) from [<c05104dc>] (bus_probe_device+0x84/0xa8) [ 5.037319] [<c05104dc>] (bus_probe_device) from [<c0510918>] (deferred_probe_work_func+0x68/0x98) [ 5.046274] [<c0510918>] (deferred_probe_work_func) from [<c025a224>] (process_one_work+0x10c/0x37c) [ 5.055403] [<c025a224>] (process_one_work) from [<c025af44>] (worker_thread+0x13c/0x404) [ 5.063576] [<c025af44>] (worker_thread) from [<c0260644>] (kthread+0xd8/0xf0) [ 5.070787] [<c0260644>] (kthread) from [<c020e678>] (ret_from_fork+0x14/0x3c) [ 5.077997] ---[ end trace 730d54a0138490bf ]--- [ 5.121533] Console: switching to colour frame buffer device 170x48 [ 5.137903] host1x drm: fb0: frame buffer device [ 5.142602] host1x drm: registered panic notifier [ 5.147297] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 5.156083] tegra-ehci c5000000.usb: EHCI Host Controller [ 5.161485] tegra-ehci c5000000.usb: new USB bus registered, assigned bus number 3 [ 5.169359] tegra-ehci c5000000.usb: irq 52, io mem 0xc5000000 [ 5.176604] asix 2-1:1.0 eth0: register 'asix' at usb-c5008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, c0:c1:c0:13:08:60 [ 5.192151] tegra-ehci c5000000.usb: USB 2.0 started, EHCI 1.00 [ 5.198577] hub 3-0:1.0: USB hub found [ 5.202361] hub 3-0:1.0: 1 port detected [ 5.207087] input: gpio-keys.4 as /devices/soc0/gpio-keys.4/input/input4 [ 5.214304] tps6586x-rtc tps6586x-rtc: setting system clock to 2014-03-20 08:05:03 UTC (1395302703) [ 5.226232] ALSA device list: [ 5.229193] #0: NVIDIA Tegra Seaboard [ 5.237719] EXT4-fs (mmcblk0p3): mounting ext3 file system using the ext4 subsystem [ 5.275789] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: (null) [ 5.283921] VFS: Mounted root (ext3 filesystem) readonly on device 179:3. [ 5.316754] devtmpfs: mounted [ 5.320237] Freeing unused kernel memory: 544K (c0a4f000 - c0ad7000) ~$off # PYBOOT: Exception: timeout
========================================================================
Board snowball-multi_v7_defconfig failure log: -------------------------------------------------
BOOTP broadcast 1 *** Unhandled DHCP Option in OFFER/ACK: 28 *** Unhandled DHCP Option in OFFER/ACK: 28 DHCP client bound to address 172.16.1.124 U8500 $ setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 U8500 $ tftp 0x00100000 tmp/snowball-je5JuK/tmp0jL5ol-uImage tftp 0x00100000 tmp/snowball-je5JuK/tmp0jL5ol-uImage smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC 08:00:08:1e:0f:44 Using smc911x-0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.124 Filename 'tmp/snowball-je5JuK/tmp0jL5ol-uImage'. Load address: 0x100000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ######################################################## done Bytes transferred = 4626033 (469671 hex) U8500 $ printenv bootargs printenv bootargs bootargs=console=ttyAMA2,115200 root=/dev/mmcblk0p4 rootwait rw debug earlyprintk U8500 $ bootm 0x00100000 bootm 0x00100000 ## Booting kernel from Legacy Image at 00100000 ... Image Name: Linux Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 4625969 Bytes = 4.4 MB Load Address: 00008000 Entry Point: 00008000 Loading Kernel Image ... OK OK
Starting kernel ...
~$off # PYBOOT: Exception: timeout
========================================================================
Board trimslice-multi_v7_defconfig failure log: -------------------------------------------------
[ 3.413852] hub 2-0:1.0: USB hub found [ 3.417651] hub 2-0:1.0: 1 port detected [ 3.425638] tegra-ehci c5000000.usb: EHCI Host Controller [ 3.431079] tegra-ehci c5000000.usb: new USB bus registered, assigned bus number 3 [ 3.438914] tegra-ehci c5000000.usb: irq 52, io mem 0xc5000000 [ 3.457117] tegra-ehci c5000000.usb: USB 2.0 started, EHCI 1.00 [ 3.463898] hub 3-0:1.0: USB hub found [ 3.467715] hub 3-0:1.0: 1 port detected [ 3.472770] input: gpio-keys.2 as /devices/soc0/gpio-keys.2/input/input0 [ 3.480148] rtc-em3027 2-0056: setting system clock to 2014-03-20 08:05:02 UTC (1395302702) [ 3.493010] ALSA device list: [ 3.495977] #0: tegra-trimslice [ 3.499982] Waiting for root device /dev/sda1... [ 3.737111] usb 2-1: new high-speed USB device number 2 using tegra-ehci [ 3.889943] hub 2-1:1.0: USB hub found [ 3.893995] hub 2-1:1.0: 4 ports detected [ 4.067255] usb 3-1: new high-speed USB device number 2 using tegra-ehci [ 4.282713] usb-storage 3-1:1.0: USB Mass Storage device detected [ 4.289720] scsi0 : usb-storage 3-1:1.0 [ 4.387464] usb 2-1.1: new high-speed USB device number 3 using tegra-ehci [ 4.850528] asix 2-1.1:1.0 eth1: register 'asix' at usb-c5008000.usb-1.1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:28:b1 [ 6.180274] scsi 0:0:0:0: Direct-Access SanDisk SSD P4 8GB 0015 PQ: 0 ANSI: 0 [ 6.191167] sd 0:0:0:0: [sda] 15649196 512-byte logical blocks: (8.01 GB/7.46 GiB) [ 6.200200] sd 0:0:0:0: [sda] Write Protect is off [ 6.206325] sd 0:0:0:0: [sda] No Caching mode page found [ 6.211742] sd 0:0:0:0: [sda] Assuming drive cache: write through [ 6.222597] sd 0:0:0:0: [sda] No Caching mode page found [ 6.228020] sd 0:0:0:0: [sda] Assuming drive cache: write through [ 6.236244] sda: sda1 [ 6.244100] sd 0:0:0:0: [sda] No Caching mode page found [ 6.249532] sd 0:0:0:0: [sda] Assuming drive cache: write through [ 6.255654] sd 0:0:0:0: [sda] Attached SCSI disk [ 6.261858] EXT4-fs (sda1): couldn't mount as ext3 due to feature incompatibilities [ 6.271237] EXT4-fs (sda1): couldn't mount as ext2 due to feature incompatibilities [ 6.310008] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 6.317797] VFS: Mounted root (ext4 filesystem) on device 8:1. [ 6.338446] devtmpfs: mounted [ 6.342835] Freeing unused kernel memory: 544K (c0a4f000 - c0ad7000) ~$off # PYBOOT: Exception: timeout
========================================================================
Board wandboard-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.376348] EXT4-fs (mmcblk0p2): couldn't mount as ext3 due to feature incompatibilities [ 1.377578] mmc1: queuing unknown CIS tuple 0x80 (4 bytes) [ 1.390752] EXT4-fs (mmcblk0p2): couldn't mount as ext2 due to feature incompatibilities [ 1.408199] mmc1: queuing unknown CIS tuple 0x02 (1 bytes) [ 1.419057] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) [ 1.421186] mmc1: new SDIO card at address 0001 [ 1.431737] VFS: Mounted root (ext4 filesystem) readonly on device 179:2. [ 1.448417] devtmpfs: mounted [ 1.451845] Freeing unused kernel memory: 544K (c0a4f000 - c0ad7000) [ 1.486726] mmc2: host does not support reading read-only switch. assuming write-enable. [ 1.496187] Internal error: Oops - undefined instruction: 0 [#1] SMP ARM [ 1.501341] mmc2: new high speed SDHC card at address 0001 [ 1.508468] Alignment trap: not handling instruction e1923f9f at [<c07bb9fc>] [ 1.515611] Unhandled fault: alignment exception (0x001) at 0x20736eae [ 1.522142] Internal error: : 1 [#2] SMP ARM [ 1.526414] Modules linked in: [ 1.529492] CPU: 0 PID: 29042 Comm: %s [ 1.529492] Not tainted 3.14.0-rc7-next-20140320 #1 [ 1.538289] task: c0991b20 ti: ec846000 task.ti: 70737573 [ 1.543704] PC is at _raw_spin_lock_irqsave+0x14/0x4c [ 1.548765] LR is at __down_read_trylock+0x14/0x54 [ 1.553561] pc : [<c07bba00>] lr : [<c027d1dc>] psr: 40000193 [ 1.553561] sp : ec847fd8 ip : c0ae4388 fp : ec8480c0 [ 1.565040] r10: 00000028 r9 : 20736eaa r8 : 0000017c [ 1.570267] r7 : c0991b20 r6 : 00000017 r5 : 20736eae r4 : 20736eaa [ 1.576796] r3 : 20000193 r2 : 20736eae r1 : 00000000 r0 : 40000193 [ 1.583328] Flags: nZcv IRQs off FIQs on Mode SVC_32 ISA ARM Segment user [ 1.590552] Control: 10c5387d Table: 3cd1804a DAC: 00000015 [ 1.596300] Process %s [ 1.596300] (pid: 29042, stack limit = 0x707377c3) [ 1.603614] Stack: (0xec847fd8 to 0x70739573) [ 1.607990] [<c07bba00>] (_raw_spin_lock_irqsave) from [<c027d1dc>] (__down_read_trylock+0x14/0x54) [ 1.617058] [<c027d1dc>] (__down_read_trylock) from [<c0217dcc>] (do_page_fault+0x78/0x27c) [ 1.625419] Code: e10f0000 f10c0080 f592f000 e1923f9f (e2831801) [ 1.631522] ---[ end trace 8512aecde62b3646 ]--- [ 1.636146] Alignment trap: not handling instruction e1923f9f at [<c07bb9fc>] [ 1.643284] Unhandled fault: alignment exception (0x001) at 0x20736eae [ 60.319018] imx-sdma 20ec000.sdma: firmware not found ~$off # PYBOOT: Exception: timeout