Automated DT boot report for various ARM defconfigs.
Tree/Branch: mainline Git describe: v3.14-10075-g2bf73dd6 Failed boot tests (console logs at the end) =========================================== sun7i-a20-cubieboard2: FAIL: multi_lpae_defconfig sun7i-a20-cubieboard2: FAIL: multi_v7_defconfig sun4i-a10-cubieboard: FAIL: multi_v7_defconfig bcm28155-ap: FAIL: multi_v7_defconfig omap4-panda-es: FAIL: multi_v7_defconfig
Full Report ===========
omap2plus_defconfig ------------------- legacy,3730xm 0 min 51.6 sec: PASS am335x-boneblack 0 min 25.7 sec: PASS omap3-beagle-xm 0 min 58.8 sec: PASS legacy,3530beagle 0 min 40.8 sec: PASS (Warnings: 1) omap4-panda 1 min 7.9 sec: PASS omap3-overo-tobi 0 min 26.4 sec: PASS (Warnings: 1) am335x-bone 0 min 27.4 sec: PASS omap3-overo-storm-tobi 0 min 24.9 sec: PASS omap5-uevm 1 min 4.8 sec: PASS (Warnings: 1) omap4-panda-es 1 min 8.6 sec: PASS legacy,3730storm 0 min 23.2 sec: PASS legacy,3530overo 0 min 24.0 sec: PASS (Warnings: 1)
multi_lpae_defconfig -------------------- omap5-uevm 1 min 42.8 sec: PASS (Warnings: 1) sun7i-a20-cubieboard2 0 min 40.0 sec: FAIL
imx_v6_v7_defconfig ------------------- imx6dl-wandboard,wand-dual 0 min 18.6 sec: PASS imx6dl-wandboard,wand-solo 0 min 19.1 sec: PASS imx6q-wandboard 0 min 17.2 sec: PASS
bcm_defconfig ------------- bcm28155-ap 0 min 23.0 sec: PASS
mvebu_v7_defconfig ------------------ armada-xp-openblocks-ax3-4 0 min 22.4 sec: PASS armada-370-mirabox 0 min 20.3 sec: PASS
exynos_defconfig ---------------- exynos5250-arndale 0 min 29.7 sec: PASS
multi_v7_defconfig ------------------ qcom-apq8074-dragonboard 0 min 16.4 sec: PASS tegra30-beaver 0 min 20.1 sec: PASS am335x-boneblack 0 min 24.1 sec: PASS omap3-beagle-xm 0 min 50.2 sec: PASS sun7i-a20-cubieboard2 0 min 40.0 sec: FAIL armada-370-mirabox 0 min 22.3 sec: PASS omap4-panda 1 min 4.0 sec: PASS armada-xp-openblocks-ax3-4 0 min 25.3 sec: PASS sun4i-a10-cubieboard 0 min 39.8 sec: FAIL bcm28155-ap 2 min 23.7 sec: FAIL omap3-overo-tobi 0 min 22.2 sec: PASS (Warnings: 1) imx6dl-wandboard,wand-solo 0 min 18.3 sec: PASS am335x-bone 0 min 26.7 sec: PASS omap3-overo-storm-tobi 0 min 24.4 sec: PASS omap5-uevm 1 min 48.6 sec: PASS (Warnings: 1) imx6q-wandboard 0 min 16.9 sec: PASS omap4-panda-es 2 min 20.7 sec: FAIL imx6dl-wandboard,wand-dual 0 min 17.9 sec: PASS
davinci_all_defconfig --------------------- legacy,dm365evm 0 min 17.4 sec: PASS
Console logs for failures =========================
multi_lpae_defconfig --------------------
sun7i-a20-cubieboard2: FAIL: last 80 lines of boot log: -------------------------------------------------------
setenv bootargs console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 sun7i# setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:::none:192.168.1.254' setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:::none:192.168.1.254' sun7i# setenv fdt_high 0xffffffff setenv fdt_high 0xffffffff sun7i# setenv initrd_high 0xffffffff setenv initrd_high 0xffffffff sun7i# if test -n ${initenv}; then run initenv; fi if test -n ${initenv}; then run initenv; fi sun7i# if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi sun7i# setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no sun7i# dhcp dhcp ENET Speed is 100 Mbps - FULL duplex connection BOOTP broadcast 1 DHCP client bound to address 192.168.1.153 sun7i# setenv serverip 192.168.1.2 setenv serverip 192.168.1.2 sun7i# if test -n ${netargs}; then run netargs; fi if test -n ${netargs}; then run netargs; fi sun7i# tftp 0x41000000 192.168.1.2:tmp/cubie2-Js7spv/zImage tftp 0x41000000 192.168.1.2:tmp/cubie2-Js7spv/zImage Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.153 Filename 'tmp/cubie2-Js7spv/zImage'. Load address: 0x41000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ######################################################### 2.7 MiB/s done Bytes transferred = 4650392 (46f598 hex) sun7i# tftp 0x43000000 192.168.1.2:buildroot.cpio.gz.uboot tftp 0x43000000 192.168.1.2:buildroot.cpio.gz.uboot Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.153 Filename 'buildroot.cpio.gz.uboot'. Load address: 0x43000000 Loading: *############################################ 2.7 MiB/s done Bytes transferred = 642602 (9ce2a hex) sun7i# tftp 0x42000000 192.168.1.2:tmp/cubie2-Js7spv/sun7i-a20-cubieboard2.dtb tftp 0x42000000 192.168.1.2:tmp/cubie2-Js7spv/sun7i-a20-cubieboard2.dtb Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.153 Filename 'tmp/cubie2-Js7spv/sun7i-a20-cubieboard2.dtb'. Load address: 0x42000000 Loading: *## 2.2 MiB/s done Bytes transferred = 18361 (47b9 hex) sun7i# printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.153:192.168.1.2:192.168.1.254:255.255.255.0:::none:192.168.1.254 sun7i# bootz 0x41000000 0x43000000 0x42000000 bootz 0x41000000 0x43000000 0x42000000 Kernel image @ 0x41000000 [ 0x000000 - 0x46f598 ] ## Loading init Ramdisk from Legacy Image at 43000000 ... Image Name: Created: 2014-02-07 19:37:29 UTC Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 42000000 Booting using the fdt blob at 0x42000000 Using Device Tree in place at 42000000, end 420077b8
Starting kernel ...
~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 40.02 seconds. # PYBOOT: Result: FAIL
multi_v7_defconfig ------------------
sun7i-a20-cubieboard2: FAIL: last 80 lines of boot log: -------------------------------------------------------
setenv bootargs console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 sun7i# setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:::none:192.168.1.254' setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:::none:192.168.1.254' sun7i# setenv fdt_high 0xffffffff setenv fdt_high 0xffffffff sun7i# setenv initrd_high 0xffffffff setenv initrd_high 0xffffffff sun7i# if test -n ${initenv}; then run initenv; fi if test -n ${initenv}; then run initenv; fi sun7i# if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi sun7i# setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no sun7i# dhcp dhcp ENET Speed is 100 Mbps - FULL duplex connection BOOTP broadcast 1 DHCP client bound to address 192.168.1.153 sun7i# setenv serverip 192.168.1.2 setenv serverip 192.168.1.2 sun7i# if test -n ${netargs}; then run netargs; fi if test -n ${netargs}; then run netargs; fi sun7i# tftp 0x41000000 192.168.1.2:tmp/cubie2-pRvswt/zImage tftp 0x41000000 192.168.1.2:tmp/cubie2-pRvswt/zImage Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.153 Filename 'tmp/cubie2-pRvswt/zImage'. Load address: 0x41000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ######################################################## 2.7 MiB/s done Bytes transferred = 4627040 (469a60 hex) sun7i# tftp 0x43000000 192.168.1.2:buildroot.cpio.gz.uboot tftp 0x43000000 192.168.1.2:buildroot.cpio.gz.uboot Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.153 Filename 'buildroot.cpio.gz.uboot'. Load address: 0x43000000 Loading: *############################################ 2.7 MiB/s done Bytes transferred = 642602 (9ce2a hex) sun7i# tftp 0x42000000 192.168.1.2:tmp/cubie2-pRvswt/sun7i-a20-cubieboard2.dtb tftp 0x42000000 192.168.1.2:tmp/cubie2-pRvswt/sun7i-a20-cubieboard2.dtb Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.153 Filename 'tmp/cubie2-pRvswt/sun7i-a20-cubieboard2.dtb'. Load address: 0x42000000 Loading: *## 2.5 MiB/s done Bytes transferred = 18361 (47b9 hex) sun7i# printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.153:192.168.1.2:192.168.1.254:255.255.255.0:::none:192.168.1.254 sun7i# bootz 0x41000000 0x43000000 0x42000000 bootz 0x41000000 0x43000000 0x42000000 Kernel image @ 0x41000000 [ 0x000000 - 0x469a60 ] ## Loading init Ramdisk from Legacy Image at 43000000 ... Image Name: Created: 2014-02-07 19:37:29 UTC Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 42000000 Booting using the fdt blob at 0x42000000 Using Device Tree in place at 42000000, end 420077b8
Starting kernel ...
~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 39.95 seconds. # PYBOOT: Result: FAIL
sun4i-a10-cubieboard: FAIL: last 80 lines of boot log: ------------------------------------------------------
setenv ethaddr 2e:40:70:f0:12:08 sun4i# setenv bootargs console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 setenv bootargs console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 sun4i# setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:::none:192.168.1.254' setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:::none:192.168.1.254' sun4i# setenv initrd_high 0xffffffff setenv initrd_high 0xffffffff sun4i# if test -n ${initenv}; then run initenv; fi if test -n ${initenv}; then run initenv; fi sun4i# if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi sun4i# setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no sun4i# dhcp dhcp ENET Speed is 100 Mbps - FULL duplex connection BOOTP broadcast 1 DHCP client bound to address 192.168.1.193 sun4i# setenv serverip 192.168.1.2 setenv serverip 192.168.1.2 sun4i# if test -n ${netargs}; then run netargs; fi if test -n ${netargs}; then run netargs; fi sun4i# tftp 0x41008000 192.168.1.2:tmp/cubie-hEKtJu/zImage tftp 0x41008000 192.168.1.2:tmp/cubie-hEKtJu/zImage Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.193 Filename 'tmp/cubie-hEKtJu/zImage'. Load address: 0x41008000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ######################################################## 2.7 MiB/s done Bytes transferred = 4627040 (469a60 hex) sun4i# tftp 0x43000000 192.168.1.2:buildroot.cpio.gz.uboot tftp 0x43000000 192.168.1.2:buildroot.cpio.gz.uboot Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.193 Filename 'buildroot.cpio.gz.uboot'. Load address: 0x43000000 Loading: *############################################ 2.7 MiB/s done Bytes transferred = 642602 (9ce2a hex) sun4i# tftp 0x42000000 192.168.1.2:tmp/cubie-hEKtJu/sun4i-a10-cubieboard.dtb tftp 0x42000000 192.168.1.2:tmp/cubie-hEKtJu/sun4i-a10-cubieboard.dtb Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.193 Filename 'tmp/cubie-hEKtJu/sun4i-a10-cubieboard.dtb'. Load address: 0x42000000 Loading: *## 2.1 MiB/s done Bytes transferred = 15184 (3b50 hex) sun4i# printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.193:192.168.1.2:192.168.1.254:255.255.255.0:::none:192.168.1.254 sun4i# bootz 0x41008000 0x43000000 0x42000000 bootz 0x41008000 0x43000000 0x42000000 Kernel image @ 0x41008000 [ 0x000000 - 0x469a60 ] ## Loading init Ramdisk from Legacy Image at 43000000 ... Image Name: Created: 2014-02-07 19:37:29 UTC Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 42000000 Booting using the fdt blob at 0x42000000 Loading Device Tree to 40ff9000, end 40fffb4f ... OK
Starting kernel ...
~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 39.77 seconds. # PYBOOT: Result: FAIL
bcm28155-ap: FAIL: last 80 lines of boot log: ---------------------------------------------
[ 0.610000] ehci-omap: OMAP-EHCI Host Controller driver [ 0.620000] ehci-orion: EHCI orion driver [ 0.620000] SPEAr-ehci: EHCI SPEAr driver [ 0.620000] tegra-ehci: Tegra EHCI driver [ 0.630000] usbcore: registered new interface driver usb-storage [ 0.630000] mousedev: PS/2 mouse device common for all mice [ 0.640000] i2c /dev entries driver [ 0.640000] bcm-kona-i2c 3e016000.i2c: device registered successfully [ 0.650000] bcm-kona-i2c 3e017000.i2c: device registered successfully [ 0.650000] bcm-kona-i2c 3e018000.i2c: device registered successfully [ 0.660000] bcm-kona-i2c 3500d000.i2c: device registered successfully [ 0.660000] usbcore: registered new interface driver uvcvideo [ 0.670000] USB Video Class driver (1.1.1) [ 0.670000] gspca_main: v2.14.0 registered [ 0.670000] sdhci: Secure Digital Host Controller Interface driver [ 0.680000] sdhci: Copyright(c) Pierre Ossman [ 0.680000] sdhci-pltfm: SDHCI platform and OF driver helper [ 0.710000] mmc0: no vqmmc regulator found [ 0.710000] mmc0: no vmmc regulator found [ 0.770000] mmc0: SDHCI controller on 3f190000.sdio [3f190000.sdio] using ADMA [ 0.770000] sdhci-kona 3f1b0000.sdio: Got CD GPIO #14. [ 0.800000] mmc1: no vqmmc regulator found [ 0.800000] mmc1: no vmmc regulator found [ 0.850000] mmc1: SDHCI controller on 3f1b0000.sdio [3f1b0000.sdio] using ADMA [ 0.850000] usbcore: registered new interface driver usbhid [ 0.860000] usbhid: USB HID core driver [ 0.860000] TCP: cubic registered [ 0.860000] NET: Registered protocol family 17 [ 0.870000] Key type dns_resolver registered [ 0.870000] ThumbEE CPU extension supported. [ 0.870000] Registering SWP/SWPB emulation handler [ 0.880000] PJ4 iWMMXt coprocessor enabled. [ 0.880000] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 0.890000] ALSA device list: [ 0.890000] No soundcards found. [ 0.890000] Waiting for root device /dev/mmcblk0p8... [ 0.910000] mmc0: BKOPS_EN bit is not set [ 0.920000] mmc0: new high speed MMC card at address 0001 [ 0.920000] mmcblk0: mmc0:0001 016G4A 14.8 GiB [ 0.930000] mmcblk0boot0: mmc0:0001 016G4A partition 1 2.00 MiB [ 0.930000] mmcblk0boot1: mmc0:0001 016G4A partition 2 2.00 MiB [ 0.940000] mmcblk0rpmb: mmc0:0001 016G4A partition 3 256 KiB [ 0.940000] Alternate GPT is invalid, using primary GPT. [ 0.950000] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 [ 0.950000] mmcblk0boot1: unknown partition table [ 0.960000] mmcblk0boot0: unknown partition table [ 1.010000] EXT4-fs (mmcblk0p8): mounted filesystem with ordered data mode. Opts: (null) [ 1.020000] VFS: Mounted root (ext4 filesystem) readonly on device 179:8. [ 1.020000] devtmpfs: mounted [ 1.030000] Freeing unused kernel memory: 544K (c0a65000 - c0aed000) [ 1.060000] Internal error: Oops - undefined instruction: 0 [#1] SMP ARM [ 1.060000] Alignment trap: not handling instruction e1923f9f at [<c07cbc7c>] [ 1.060000] Unhandled fault: alignment exception (0x001) at 0x20736eae [ 1.060000] Internal error: : 1 [#2] SMP ARM [ 1.060000] Modules linked in: [ 1.060000] CPU: 0 PID: 1702063392 Comm: e wakeup source: %s [ 1.060000] Not tainted 3.14.0-10075-g2bf73dd6 #1 [ 1.060000] task: c09a3734 ti: ea838000 task.ti: 70737573 [ 1.060000] PC is at _raw_spin_lock_irqsave+0x14/0x4c [ 1.060000] LR is at __down_read_trylock+0x14/0x54 [ 1.060000] pc : [<c07cbc80>] lr : [<c027cf3c>] psr: 40000193 [ 1.060000] sp : ea839f38 ip : ea83a020 fp : ea83a020 [ 1.060000] r10: 00000028 r9 : 20736eaa r8 : 0000017c [ 1.060000] r7 : c09a3734 r6 : 00000005 r5 : 20736eae r4 : 20736eaa [ 1.060000] r3 : 00000193 r2 : 20736eae r1 : 00000000 r0 : 40000193 [ 1.060000] Flags: nZcv IRQs off FIQs on Mode SVC_32 ISA ARM Segment user [ 1.060000] Control: 10c5387d Table: babf404a DAC: 00000015 [ 1.060000] Process e wakeup source: (pid: 1702063392, stack limit = 0x707377c3) [ 1.060000] Stack: (0xea839f38 to 0x70739573) [ 1.060000] [<c07cbc80>] (_raw_spin_lock_irqsave) from [<c027cf3c>] (__down_read_trylock+0x14/0x54) [ 1.060000] [<c027cf3c>] (__down_read_trylock) from [<c0217cd0>] (do_page_fault+0x78/0x27c) [ 1.060000] [<c0217cd0>] (do_page_fault) from [<c02083d4>] (do_DataAbort+0x38/0x98) [ 1.060000] Code: e10f0000 f10c0080 f592f000 e1923f9f (e2831801) [ 1.060000] ---[ end trace 0663c82a3a5b17f1 ]--- [ 1.060000] Alignment trap: not handling instruction e1923f9f at [<c07cbc7c>] [ 1.060000] Unhandled fault: alignment exception (0x001) at 0x20736eae ~$off # PYBOOT: Exception: userspace: ERROR: Never found root shell # PYBOOT: Time: 143.65 seconds. # PYBOOT: Result: FAIL
omap4-panda-es: FAIL: last 80 lines of boot log: ------------------------------------------------
[ 1.430511] STMicroelectronics ASC driver initialized [ 1.436645] serial: Freescale lpuart driver [ 1.441253] [drm] Initialized drm 1.1.0 20060810 [ 1.450897] loop: module loaded [ 1.460144] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver [ 1.467956] usbcore: registered new interface driver pegasus [ 1.473968] usbcore: registered new interface driver asix [ 1.479705] usbcore: registered new interface driver ax88179_178a [ 1.486145] usbcore: registered new interface driver cdc_ether [ 1.492309] usbcore: registered new interface driver smsc75xx [ 1.498413] usbcore: registered new interface driver smsc95xx [ 1.504486] usbcore: registered new interface driver net1080 [ 1.510498] usbcore: registered new interface driver cdc_subset [ 1.516723] usbcore: registered new interface driver zaurus [ 1.522674] usbcore: registered new interface driver cdc_ncm [ 1.528625] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.535491] ehci-pci: EHCI PCI platform driver [ 1.540222] ehci-platform: EHCI generic platform driver [ 1.545898] ehci-omap: OMAP-EHCI Host Controller driver [ 1.571655] ehci-omap 4a064c00.ehci: EHCI Host Controller [ 1.577362] ehci-omap 4a064c00.ehci: new USB bus registered, assigned bus number 1 [ 1.585662] ehci-omap 4a064c00.ehci: irq 109, io mem 0x4a064c00 [ 1.608673] ehci-omap 4a064c00.ehci: USB 2.0 started, EHCI 1.00 [ 1.615600] hub 1-0:1.0: USB hub found [ 1.619598] hub 1-0:1.0: 3 ports detected [ 1.624267] ehci-orion: EHCI orion driver [ 1.628662] SPEAr-ehci: EHCI SPEAr driver [ 1.633026] tegra-ehci: Tegra EHCI driver [ 1.637878] usbcore: registered new interface driver usb-storage [ 1.645904] mousedev: PS/2 mouse device common for all mice [ 1.653747] i2c /dev entries driver [ 1.658172] usbcore: registered new interface driver uvcvideo [ 1.664215] USB Video Class driver (1.1.1) [ 1.668518] gspca_main: v2.14.0 registered [ 1.674804] sdhci: Secure Digital Host Controller Interface driver [ 1.681304] sdhci: Copyright(c) Pierre Ossman [ 1.686553] omap_hsmmc 4809c000.mmc: vmmc regulator missing [ 1.692474] platform 4809c000.mmc: Driver omap_hsmmc requests probe deferral [ 1.700134] omap_hsmmc 480d5000.mmc: vmmc regulator missing [ 1.706024] platform 480d5000.mmc: Driver omap_hsmmc requests probe deferral [ 1.713867] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.720672] usbcore: registered new interface driver usbhid [ 1.726531] usbhid: USB HID core driver [ 1.734313] TCP: cubic registered [ 1.737823] NET: Registered protocol family 17 [ 1.742645] Key type dns_resolver registered [ 1.747650] Power Management for TI OMAP4+ devices. [ 1.752807] Power Management for TI OMAP4. [ 1.757110] OMAP4 PM: u-boot >= v2012.07 is required for full PM support [ 1.764251] ThumbEE CPU extension supported. [ 1.768981] Registering SWP/SWPB emulation handler [ 1.769012] PJ4 iWMMXt coprocessor enabled. [ 1.779083] vwl1271: 1800 mV [ 1.785644] Skipping twl internal clock init and using bootloader value (unknown osc rate) [ 1.795684] twl 0-0048: PIH (irq 39) nested IRQs [ 1.802032] twl_rtc rtc.11: Enabling TWL-RTC [ 1.808898] twl_rtc rtc.11: rtc core: registered rtc.11 as rtc0 [ 1.815856] VAUX1_6030: 1000 <--> 3000 mV at 2800 mV [ 1.821960] VAUX2_6030: 1200 <--> 2800 mV at 1800 mV [ 1.828002] VAUX3_6030: 1000 <--> 3000 mV at 1200 mV [ 1.834106] VMMC: 1200 <--> 3000 mV at 3000 mV [ 1.839599] VPP: 1800 <--> 2500 mV at 1900 mV [ 1.845031] VUSIM: 1200 <--> 2900 mV at 1800 mV [ 1.850494] VDAC: 1800 mV [ 1.853759] VANA: 2100 mV [ 1.857299] VCXIO: 1800 mV [ 1.860687] VUSB: 3300 mV [ 1.864227] V1V8: 1800 mV [ 1.867797] V2V1: 2100 mV [ 1.875244] omap_i2c 48070000.i2c: bus 0 rev0.11 at 400 kHz [ 1.949157] usb 1-1: new high-speed USB device number 2 using ehci-omap [ 2.119445] hub 1-1:1.0: USB hub found [ 2.123687] hub 1-1:1.0: 5 ports detected [ 2.714080] usb 1-1.1: new high-speed USB device number 3 using ehci-omap [ 2.922454] smsc95xx v1.0.4 [ 3.066467] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-4a064c00.ehci-1.1, smsc95xx USB 2.0 Ethernet, a2:a4:76:de:7d:ff ~$off # PYBOOT: Exception: kernel: ERROR: failed to boot: <class 'pexpect.TIMEOUT'> # PYBOOT: Time: 140.67 seconds. # PYBOOT: Result: FAIL