Failed boards:
cubie2 sunxi_defconfig : FAILED 1:20.81 dalmore tegra_defconfig : FAILED 0:45.20 dalmore multi_v7_defconfig : FAILED 1:08.95 dalmore multi_lpae_defconfig : FAILED 1:04.86 panda multi_v7_defconfig : FAILED 1:37.11 snowball multi_v7_defconfig : FAILED 1:10.29
Successful boards:
apc vt8500_v6_v7_defconfig : passed 1:17.45 arndale exynos_defconfig : passed 1:07.86 bbb omap2plus_defconfig : passed 1:26.47 bbb multi_v7_defconfig : passed 1:12.73 beaver tegra_defconfig : passed 0:58.45 beaver multi_v7_defconfig : passed 0:51.27 capri bcm_defconfig : passed 0:43.40 capri multi_v7_defconfig : passed 0:43.67 cubie sunxi_defconfig : passed 0:54.55 cubie multi_v7_defconfig : passed 1:03.48 cubie2 multi_v7_defconfig : passed 1:09.37 cubie2 multi_lpae_defconfig : passed 1:06.19 hummingboard imx_v6_v7_defconfig : passed 1:19.44 hummingboard multi_v7_defconfig : passed 1:08.93 omap5uevm omap2plus_defconfig : warnings 1:17.72 omap5uevm multi_v7_defconfig : warnings 1:45.88 omap5uevm multi_lpae_defconfig : warnings 1:39.81 panda omap2plus_defconfig : warnings 1:12.94 sama5 sama5_defconfig : passed 2:01.21 seaboard tegra_defconfig : passed 1:01.69 seaboard multi_v7_defconfig : passed 1:07.67 snow exynos_defconfig : passed 1:32.05 snowball u8500_defconfig : passed 2:19.98 trimslice tegra_defconfig : passed 1:00.22 trimslice multi_v7_defconfig : passed 0:59.54 wandboard imx_v6_v7_defconfig : passed 0:57.37 wandboard multi_v7_defconfig : passed 1:01.34
Offline boards:
Board legend is available at http://arm-soc.lixom.net/boards.html
Last entries of failed logs below:
========================================================================
Board cubie2-sunxi_defconfig failure log: -------------------------------------------------
[ 0.018270] platform ahci-5v.2: Driver reg-fixed-voltage requests probe deferral [ 0.018295] reg-fixed-voltage usb1-vbus.3: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/usb1_vbus_pin@0, deferring probe [ 0.018308] platform usb1-vbus.3: Driver reg-fixed-voltage requests probe deferral [ 0.018327] reg-fixed-voltage usb2-vbus.4: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/usb2_vbus_pin@0, deferring probe [ 0.018339] platform usb2-vbus.4: Driver reg-fixed-voltage requests probe deferral [ 0.019395] Switched to clocksource arch_sys_counter [ 0.026643] NET: Registered protocol family 2 [ 0.027113] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.027199] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.027320] TCP: Hash tables configured (established 8192 bind 8192) [ 0.027401] TCP: reno registered [ 0.027415] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.027469] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.027693] NET: Registered protocol family 1 [ 0.028104] RPC: Registered named UNIX socket transport module. [ 0.028119] RPC: Registered udp transport module. [ 0.028125] RPC: Registered tcp transport module. [ 0.028131] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.029210] futex hash table entries: 512 (order: 3, 32768 bytes) [ 0.029886] bounce: pool size: 64 pages [ 0.037747] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.037771] io scheduler noop registered [ 0.037784] io scheduler deadline registered [ 0.037974] io scheduler cfq registered (default) [ 0.039732] sunxi-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver [ 0.082007] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled [ 0.084440] console [ttyS0] disabled [ 0.104633] 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 33, base_baud = 1500000) is a U6_16550A [ 0.619977] console [ttyS0] enabled [ 0.624779] mousedev: PS/2 mouse device common for all mice [ 0.630695] i2c /dev entries driver [ 0.635541] sunxi-wdt 1c20c90.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0) [ 0.644709] TCP: cubic registered [ 0.648038] NET: Registered protocol family 17 [ 0.652632] Registering SWP/SWPB emulation handler [ 0.658445] ahci-5v: 5000 mV [ 0.661741] usb1-vbus: 5000 mV [ 0.665104] usb2-vbus: 5000 mV ~$off # PYBOOT: Exception: timeout
========================================================================
Board dalmore-multi_lpae_defconfig failure log: -------------------------------------------------
Tegra114 (Dalmore) # tftp 0x82000000 next/next-20140501/multi_lpae_defconfig/zImage tftp 0x82000000 next/next-20140501/multi_lpae_defconfig/zImage Using asx0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.113 Filename 'next/next-20140501/multi_lpae_defconfig/zImage'. Load address: 0x82000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ############################################################ 2.8 MiB/s done Bytes transferred = 4687896 (478818 hex) Tegra114 (Dalmore) # setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 Tegra114 (Dalmore) # tftp 0x83000000 next/next-20140501/multi_lpae_defconfig/dtbs/tegra114-dalmore.dtb tftp 0x83000000 next/next-20140501/multi_lpae_defconfig/dtbs/tegra114-dalmore.dtb Using asx0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.113 Filename 'next/next-20140501/multi_lpae_defconfig/dtbs/tegra114-dalmore.dtb'. Load address: 0x83000000 Loading: *### 983.4 KiB/s done Bytes transferred = 34244 (85c4 hex) Tegra114 (Dalmore) # printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 root=/dev/mmcblk0p1 rootwait debug earlyprintk Tegra114 (Dalmore) # bootz 0x82000000 - 0x83000000 bootz 0x82000000 - 0x83000000 Kernel image @ 0x82000000 [ 0x000000 - 0x478818 ] ## Flattened Device Tree blob at 83000000 Booting using the fdt blob at 0x83000000 Loading Device Tree to 8fff4000, end 8ffff5c3 ... OK
Starting kernel ...
~$off # PYBOOT: Exception: timeout
========================================================================
Board dalmore-multi_v7_defconfig failure log: -------------------------------------------------
Tegra114 (Dalmore) # tftp 0x82000000 next/next-20140501/multi_v7_defconfig/zImage tftp 0x82000000 next/next-20140501/multi_v7_defconfig/zImage Using asx0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.113 Filename 'next/next-20140501/multi_v7_defconfig/zImage'. Load address: 0x82000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ########################################################## 2.9 MiB/s done Bytes transferred = 4664240 (472bb0 hex) Tegra114 (Dalmore) # setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 Tegra114 (Dalmore) # tftp 0x83000000 next/next-20140501/multi_v7_defconfig/dtbs/tegra114-dalmore.dtb tftp 0x83000000 next/next-20140501/multi_v7_defconfig/dtbs/tegra114-dalmore.dtb Using asx0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.113 Filename 'next/next-20140501/multi_v7_defconfig/dtbs/tegra114-dalmore.dtb'. Load address: 0x83000000 Loading: *### 903.3 KiB/s done Bytes transferred = 34244 (85c4 hex) Tegra114 (Dalmore) # printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 root=/dev/mmcblk0p1 rootwait debug earlyprintk Tegra114 (Dalmore) # bootz 0x82000000 - 0x83000000 bootz 0x82000000 - 0x83000000 Kernel image @ 0x82000000 [ 0x000000 - 0x472bb0 ] ## Flattened Device Tree blob at 83000000 Booting using the fdt blob at 0x83000000 Loading Device Tree to 8fff4000, end 8ffff5c3 ... OK
Starting kernel ...
~$off # PYBOOT: Exception: timeout
========================================================================
Board dalmore-tegra_defconfig failure log: -------------------------------------------------
[ 1.538798] [<c00086e4>] (gic_handle_irq) from [<c0012540>] (__irq_svc+0x40/0x70) [ 1.546312] Exception stack(0xea083f88 to 0xea083fd0) [ 1.551437] 3f80: ffffffed 00000000 00000000 00000000 c0826488 ea082000 [ 1.559669] 3fa0: c0826420 00000000 00000000 c081ae80 ffffffed ea082000 00000000 ea083fd0 [ 1.567894] 3fc0: c000f240 c000f244 60000113 ffffffff [ 1.573039] [<c0012540>] (__irq_svc) from [<c000f244>] (arch_cpu_idle+0x2c/0x30) [ 1.580498] [<c000f244>] (arch_cpu_idle) from [<c005cc00>] (cpu_startup_entry+0x140/0x230) [ 1.588802] [<c005cc00>] (cpu_startup_entry) from [<80008784>] (0x80008784) [ 1.595802] CPU3: stopping [ 1.598586] CPU: 3 PID: 0 Comm: swapper/3 Tainted: G D 3.15.0-rc3-next-20140501 #1 [ 1.607211] [<c0015e14>] (unwind_backtrace) from [<c00119c4>] (show_stack+0x10/0x14) [ 1.614989] [<c00119c4>] (show_stack) from [<c05b23d0>] (dump_stack+0xa0/0xd8) [ 1.622254] [<c05b23d0>] (dump_stack) from [<c0014618>] (handle_IPI+0x148/0x15c) [ 1.629704] [<c0014618>] (handle_IPI) from [<c00086e4>] (gic_handle_irq+0x58/0x5c) [ 1.637337] [<c00086e4>] (gic_handle_irq) from [<c0012540>] (__irq_svc+0x40/0x70) [ 1.644851] Exception stack(0xea085f88 to 0xea085fd0) [ 1.649975] 5f80: ffffffed 00000000 00000000 00000000 c0826488 ea084000 [ 1.658211] 5fa0: c0826420 00000000 00000000 c081ae80 ffffffed ea084000 00000000 ea085fd0 [ 1.666433] 5fc0: c000f240 c000f244 60000113 ffffffff [ 1.671578] [<c0012540>] (__irq_svc) from [<c000f244>] (arch_cpu_idle+0x2c/0x30) [ 1.679043] [<c000f244>] (arch_cpu_idle) from [<c005cc00>] (cpu_startup_entry+0x140/0x230) [ 1.687341] [<c005cc00>] (cpu_startup_entry) from [<80008784>] (0x80008784) [ 1.694343] CPU1: stopping [ 1.697126] CPU: 1 PID: 0 Comm: swapper/1 Tainted: G D 3.15.0-rc3-next-20140501 #1 [ 1.705746] [<c0015e14>] (unwind_backtrace) from [<c00119c4>] (show_stack+0x10/0x14) [ 1.713527] [<c00119c4>] (show_stack) from [<c05b23d0>] (dump_stack+0xa0/0xd8) [ 1.720796] [<c05b23d0>] (dump_stack) from [<c0014618>] (handle_IPI+0x148/0x15c) [ 1.728246] [<c0014618>] (handle_IPI) from [<c00086e4>] (gic_handle_irq+0x58/0x5c) [ 1.735876] [<c00086e4>] (gic_handle_irq) from [<c0012540>] (__irq_svc+0x40/0x70) [ 1.743393] Exception stack(0xea081f88 to 0xea081fd0) [ 1.748518] 1f80: ffffffed 00000000 00000000 00000000 c0826488 ea080000 [ 1.756750] 1fa0: c0826420 00000000 00000000 c081ae80 ffffffed ea080000 00000000 ea081fd0 [ 1.764974] 1fc0: c000f240 c000f244 60000113 ffffffff [ 1.770118] [<c0012540>] (__irq_svc) from [<c000f244>] (arch_cpu_idle+0x2c/0x30) [ 1.777575] [<c000f244>] (arch_cpu_idle) from [<c005cc00>] (cpu_startup_entry+0x140/0x230) [ 1.785881] [<c005cc00>] (cpu_startup_entry) from [<80008784>] (0x80008784) [ 1.792902] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b [ 1.792902] ~$off # PYBOOT: Exception: panic
========================================================================
Board panda-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.627838] platform 4809c000.mmc: Driver omap_hsmmc requests probe deferral [ 1.635528] omap_hsmmc 480d5000.mmc: unable to get vmmc regulator -517 [ 1.642456] platform 480d5000.mmc: Driver omap_hsmmc requests probe deferral [ 1.650390] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.657348] usbcore: registered new interface driver usbhid [ 1.663208] usbhid: USB HID core driver [ 1.671661] TCP: cubic registered [ 1.675140] NET: Registered protocol family 17 [ 1.680053] Key type dns_resolver registered [ 1.685028] Power Management for TI OMAP4+ devices. [ 1.690185] Power Management for TI OMAP4. [ 1.694488] OMAP4 PM: u-boot >= v2012.07 is required for full PM support [ 1.701904] ThumbEE CPU extension supported. [ 1.701904] Registering SWP/SWPB emulation handler [ 1.712280] vwl1271: 1800 mV [ 1.716918] Skipping twl internal clock init and using bootloader value (unknown osc rate) [ 1.726715] twl 0-0048: PIH (irq 39) nested IRQs [ 1.732910] twl_rtc rtc.15: Power up reset detected. [ 1.739105] twl_rtc rtc.15: Enabling TWL-RTC [ 1.746093] twl_rtc rtc.15: rtc core: registered rtc.15 as rtc0 [ 1.753021] VAUX1_6030: 1000 <--> 3000 mV at 2800 mV [ 1.759155] VAUX2_6030: 1200 <--> 2800 mV at 1800 mV [ 1.765228] VAUX3_6030: 1000 <--> 3000 mV at 1200 mV [ 1.771392] VMMC: 1200 <--> 3000 mV at 3000 mV [ 1.776916] VPP: 1800 <--> 2500 mV at 1900 mV [ 1.782409] VUSIM: 1200 <--> 2900 mV at 1800 mV [ 1.787414] VDAC: 1800 mV [ 1.787414] VANA: 2100 mV [ 1.794769] VCXIO: 1800 mV [ 1.795806] VUSB: 3300 mV [ 1.801727] V1V8: 1800 mV [ 1.805328] V2V1: 2100 mV [ 1.901062] usb 1-1: new high-speed USB device number 2 using ehci-omap [ 2.072387] hub 1-1:1.0: USB hub found [ 2.076660] hub 1-1:1.0: 5 ports detected [ 2.461639] usb 1-1.1: new high-speed USB device number 3 using ehci-omap [ 2.606384] smsc95xx v1.0.4 [ 4.142028] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-4a064c00.ehci-1.1, smsc95xx USB 2.0 Ethernet, b6:e5:68:83:eb:73 ~$off # PYBOOT: Exception: timeout
========================================================================
Board snowball-multi_v7_defconfig failure log: -------------------------------------------------
BOOTP broadcast 1 *** Unhandled DHCP Option in OFFER/ACK: 28 *** Unhandled DHCP Option in OFFER/ACK: 28 DHCP client bound to address 172.16.1.106 U8500 $ setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 U8500 $ tftp 0x01000000 tmp/snowball-At9dE6/tmp0blCKg-uImage tftp 0x01000000 tmp/snowball-At9dE6/tmp0blCKg-uImage smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC 08:00:08:1e:0f:44 Using smc911x-0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.106 Filename 'tmp/snowball-At9dE6/tmp0blCKg-uImage'. Load address: 0x1000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ############################################################# done Bytes transferred = 4705553 (47cd11 hex) U8500 $ printenv bootargs printenv bootargs bootargs=console=ttyAMA2,115200 root=/dev/mmcblk0p4 rootwait rw debug earlyprintk U8500 $ bootm 0x01000000 bootm 0x01000000 ## Booting kernel from Legacy Image at 01000000 ... Image Name: Linux Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 4705489 Bytes = 4.5 MB Load Address: 00008000 Entry Point: 00008000 Loading Kernel Image ... OK OK
Starting kernel ...
~$off # PYBOOT: Exception: timeout