mainline boot: 51 passed 26 failed (mainline/v4.6-rc4-17-g55f058e)

Full logs are available at http://arm-soc.lixom.net/bootlogs/mainline/v4.6-rc4-17-g55f058e/

Failed boards:

arndale arm-multi_v7_nosmp_defconfig : FAILED 2:36.81 bbb arm-omap2plus_defconfig : FAILED 1:54.35 bbb arm-multi_v7_defconfig : FAILED 2:02.53 bbb arm-multi_v7_nosmp_defconfig : FAILED 2:05.45 beagleboard-x15 arm-omap2plus_defconfig : FAILED 1:44.46 beagleboard-x15 arm-multi_v7_defconfig : FAILED 1:43.82 beagleboard-x15 arm-multi_lpae_defconfig : FAILED 1:49.72 beagleboard-x15 arm-multi_v7_nosmp_defconfig : FAILED 2:03.96 beaver arm-tegra_defconfig : FAILED 1:44.65 beaver arm-multi_v7_defconfig : FAILED 1:55.70 beaver arm-multi_v7_nosmp_defconfig : FAILED 1:56.85 colibri-vf61 arm-multi_v7_defconfig : FAILED 3:15.51 colombus arm-multi_v7_nosmp_defconfig : FAILED 3:19.94 cosmic arm-imx_v6_v7_defconfig : FAILED 2:01.29 cosmic arm-multi_v7_defconfig : FAILED 2:18.69 cosmic arm-multi_v7_nosmp_defconfig : FAILED 2:13.21 dalmore arm-tegra_defconfig : FAILED 1:49.18 dalmore arm-multi_v7_defconfig : FAILED 2:05.71 dalmore arm-multi_lpae_defconfig : FAILED 2:07.25 dalmore arm-multi_v7_nosmp_defconfig : FAILED 1:52.18 minnowmax minnowmax_defconfig : NO BUILD odroidu3 arm-exynos_defconfig : FAILED 1:56.33 snow arm-multi_v7_nosmp_defconfig : FAILED 3:13.40 snowball arm-u8500_defconfig : FAILED 1:55.79 snowball arm-multi_v7_defconfig : FAILED 2:12.98 snowball arm-multi_v7_nosmp_defconfig : FAILED 2:06.92 wandboard arm-imx_v6_v7_defconfig : FAILED 3:00.52

Successful boards:

apc arm-vt8500_v6_v7_defconfig : passed 1:16.82 arndale arm-exynos_defconfig : passed 1:32.72 arndale arm-multi_v7_defconfig : passed 1:53.39 arndale arm-multi_lpae_defconfig : passed 1:35.92 capri arm-bcm_defconfig : passed 0:57.86 capri arm-multi_v7_defconfig : passed 0:49.25 capri arm-multi_v7_nosmp_defconfig : warnings 0:57.77 chitra powerpc-pasemi_defconfig : passed 2:00.76 chitra powerpc-ppc64_defconfig : passed 2:11.08 colibri-vf61 arm-imx_v6_v7_defconfig : passed 1:29.85 colibri-vf61 arm-multi_v7_nosmp_defconfig : passed 1:25.46 colombus arm-sunxi_defconfig : passed 2:29.70 colombus arm-multi_v7_defconfig : passed 2:38.03 colombus arm-multi_lpae_defconfig : passed 2:42.48 cubie arm-sunxi_defconfig : passed 0:57.42 cubie arm-multi_v7_defconfig : passed 0:59.96 cubie arm-multi_v7_nosmp_defconfig : passed 1:00.43 cubie2 arm-sunxi_defconfig : passed 0:54.25 cubie2 arm-multi_v7_defconfig : passed 0:58.77 cubie2 arm-multi_lpae_defconfig : passed 0:59.91 cubie2 arm-multi_v7_nosmp_defconfig : warnings 1:09.01 cubox arm-multi_v7_defconfig : passed 1:05.92 cubox arm-mvebu_v7_defconfig : passed 1:08.14 cubox arm-multi_v7_nosmp_defconfig : passed 1:23.03 hummingboard arm-imx_v6_v7_defconfig : passed 1:31.33 hummingboard arm-multi_v7_defconfig : passed 1:25.26 hummingboard arm-multi_v7_nosmp_defconfig : warnings 1:09.64 jetsontk1 arm-multi_v7_defconfig : passed 1:47.46 jetsontk1 arm-multi_lpae_defconfig : passed 1:47.79 jetsontk1 arm-multi_v7_nosmp_defconfig : warnings 1:38.65 pandaes arm-omap2plus_defconfig : warnings 1:36.90 pandaes arm-multi_v7_defconfig : passed 1:59.55 pandaes arm-multi_v7_nosmp_defconfig : warnings 2:02.31 pi arm-exynos_defconfig : passed 2:06.81 pi arm-multi_v7_defconfig : passed 2:53.94 pi arm-multi_lpae_defconfig : passed 2:36.30 pi arm-multi_v7_nosmp_defconfig : warnings 2:16.03 pit arm-exynos_defconfig : passed 2:12.05 pit arm-multi_v7_defconfig : passed 2:18.46 pit arm-multi_lpae_defconfig : passed 2:33.09 pit arm-multi_v7_nosmp_defconfig : warnings 2:09.04 seattle arm64-defconfig : warnings 2:14.26 snow arm-exynos_defconfig : passed 2:11.20 snow arm-multi_v7_defconfig : passed 2:29.54 snow arm-multi_lpae_defconfig : passed 1:59.10 socfpga arm-socfpga_defconfig : passed 1:19.02 socfpga arm-multi_v7_defconfig : passed 1:23.67 socfpga arm-multi_v7_nosmp_defconfig : warnings 1:32.25 trimslice arm-multi_v7_defconfig : passed 1:45.55 wandboard arm-multi_v7_defconfig : passed 1:13.24 wandboard arm-multi_v7_nosmp_defconfig : warnings 1:11.40

Offline boards:

jetsontk1 arm-tegra_defconfig : OFFLINE 2:16.22 omap5uevm arm-omap2plus_defconfig : OFFLINE 1:17.87 omap5uevm arm-multi_v7_defconfig : OFFLINE 1:19.48 omap5uevm arm-multi_lpae_defconfig : OFFLINE 1:30.98 omap5uevm arm-multi_v7_nosmp_defconfig : OFFLINE 1:21.54 parallella arm-multi_v7_defconfig : OFFLINE 2:32.67 parallella arm-multi_v7_nosmp_defconfig : OFFLINE 2:19.61 rk3288evb arm-multi_v7_defconfig : OFFLINE 0:51.46 rk3288evb arm-multi_lpae_defconfig : OFFLINE 0:55.64 rk3288evb arm-multi_v7_nosmp_defconfig : OFFLINE 0:49.37 sama5 arm-sama5_defconfig : OFFLINE 2:19.94 sama5d3-xplained arm-sama5_defconfig : OFFLINE 2:30.59 seaboard arm-tegra_defconfig : OFFLINE 2:18.10 seaboard arm-multi_v7_defconfig : OFFLINE 2:29.91 seaboard arm-multi_v7_nosmp_defconfig : OFFLINE 2:13.52 trimslice arm-tegra_defconfig : OFFLINE 2:21.17 trimslice arm-multi_v7_nosmp_defconfig : OFFLINE 2:15.09

Board legend is available at http://arm-soc.lixom.net/boards.html

Board arndale-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------

[ 2.034876] hdmi-en: disabling [ 2.038293] ahci 122f0000.sata: couldn't get PHY in node sata: -517 [ 0.000000] Booting Linux on physical CPU 0x0 [ 2.048472] [c1038dc0] *pgd=4100041e(bad) [ 0.000000] Linux version 4.6.0-rc4-00017-g55f058e (build@brutus) (gcc version 4.9.2 (GCC) ) #1 Wed Apr 20 12:11:19 PDT 2016 [ 0.000000] CPU: ARMv7 Processor [410fc0f4] revision 4 (ARMv7), cr=10c53c7d [ 2.070606] Modules linked in: [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache [ 0.000000] Machine model: Insignal Arndale evaluation board based on EXYNOS5250 [ 0.000000] cma: Reserved 64 MiB at 0xbc000000 [ 0.000000] Memory policy: Data cache writeback [ 0.000000] Samsung CPU ID: 0x43520010 [ 0.000000] On node 0 totalpages: 520192 [ 0.000000] free_area_init_node: node 0, pgdat c10fd420, node_mem_map eeff7000 [ 0.000000] DMA zone: 1536 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 192512 pages, LIFO batch:31 [ 0.000000] HighMem zone: 327680 pages, LIFO batch:31 [ 0.000000] ------------[ cut here ]------------ [ 0.000000] WARNING: CPU: 0 PID: 0 at /home/build/work/batch/arch/arm/kernel/devtree.c:149 arm_dt_init_cpu_maps+0xd4/0x130 [ 0.000000] DT /cpu 2 nodes greater than max cores 1, capping them [ 0.000000] Modules linked in: [ 0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 4.6.0-rc4-00017-g55f058e #1 [ 0.000000] Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) [ 0.000000] [<c030e900>] (unwind_backtrace) from [<c030b474>] (show_stack+0x10/0x14) [ 0.000000] [<c030b474>] (show_stack) from [<c0335db0>] (__warn+0xe4/0xfc) [ 0.000000] [<c0335db0>] (__warn) from [<c0335e00>] (warn_slowpath_fmt+0x38/0x48) [ 0.000000] [<c0335e00>] (warn_slowpath_fmt) from [<c0f040e8>] (arm_dt_init_cpu_maps+0xd4/0x130) [ 0.000000] [<c0f040e8>] (arm_dt_init_cpu_maps) from [<c0f03424>] (setup_arch+0x7b8/0x8ec) [ 0.000000] [<c0f03424>] (setup_arch) from [<c0f00944>] (start_kernel+0x68/0x370) [ 0.000000] [<c0f00944>] (start_kernel) from [<40208078>] (0x40208078) [ 0.000000] ---[ end trace cb88537fdc8fa200 ]---

[PYBOOT] [arndale 02:34]: Timed out waiting for "<type 'str'>":

[PYBOOT] [arndale 02:35]: got exception: timeout ~$off

[PYBOOT] [arndale 02:36]: Done. Board bbb-arm-multi_v7_defconfig failure log: -------------------------------------------------

[ 1.630590] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.640837] ledtrig-cpu: registered to indicate activity on CPUs [ 1.647908] usbcore: registered new interface driver usbhid [ 1.653834] usbhid: USB HID core driver [ 1.665897] NET: Registered protocol family 10 [ 1.672465] sit: IPv6 over IPv4 tunneling driver [ 1.678595] NET: Registered protocol family 17 [ 1.683372] can: controller area network core (rev 20120528 abi 9) [ 1.690007] NET: Registered protocol family 29 [ 1.694725] can: raw protocol (rev 20120528) [ 1.699244] can: broadcast manager protocol (rev 20120528 t) [ 1.705236] can: netlink gateway (rev 20130117) max_hops=1 [ 1.711994] Key type dns_resolver registered [ 1.716886] omap_voltage_late_init: Voltage driver support not added [ 1.725173] ThumbEE CPU extension supported. [ 1.729810] Registering SWP/SWPB emulation handler [ 1.772242] tps65217 0-0024: TPS65217 ID 0xe version 1.2 [ 1.778779] at24 0-0050: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.786546] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 1.795258] at24 2-0054: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.803181] at24 2-0055: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.811011] at24 2-0056: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.818828] at24 2-0057: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.826178] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz [ 1.834879] cpufreq: cpufreq_online: CPU0: Running at unlisted freq: 550000 KHz [ 1.842809] cpufreq: cpufreq_online: CPU0: Unlisted initial frequency changed to: 600000 KHz [ 1.852535] mmc1: new high speed MMC card at address 0001 [ 1.859754] hctosys: unable to open rtc device (rtc0) [ 1.872807] mmcblk1: mmc1:0001 MMC02G 1.79 GiB [ 1.878827] mmcblk1boot0: mmc1:0001 MMC02G partition 1 1.00 MiB [ 1.885814] mmcblk1boot1: mmc1:0001 MMC02G partition 2 1.00 MiB [ 1.894655] mmcblk1: p1 p2 [ 1.900372] Waiting for root device /dev/mmcblk0p2...

[PYBOOT] [bbb 01:59]: Timed out waiting for "<type 'str'>":

[PYBOOT] [bbb 02:00]: got exception: timeout ~$off

[PYBOOT] [bbb 02:01]: Done. Board bbb-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------

[ 1.315209] sdhci: Secure Digital Host Controller Interface driver [ 1.321737] sdhci: Copyright(c) Pierre Ossman [ 1.327536] omap_hsmmc 48060000.mmc: Got CD GPIO [ 1.390527] Synopsys Designware Multimedia Card Interface Driver [ 1.397911] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.407101] ledtrig-cpu: registered to indicate activity on CPUs [ 1.413838] usbcore: registered new interface driver usbhid [ 1.419722] usbhid: USB HID core driver [ 1.429264] NET: Registered protocol family 10 [ 1.435747] sit: IPv6 over IPv4 tunneling driver [ 1.441613] NET: Registered protocol family 17 [ 1.446353] can: controller area network core (rev 20120528 abi 9) [ 1.452953] NET: Registered protocol family 29 [ 1.457649] can: raw protocol (rev 20120528) [ 1.462163] can: broadcast manager protocol (rev 20120528 t) [ 1.468140] can: netlink gateway (rev 20130117) max_hops=1 [ 1.474646] Key type dns_resolver registered [ 1.479503] omap_voltage_late_init: Voltage driver support not added [ 1.487304] ThumbEE CPU extension supported. [ 1.499876] at24 0-0050: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.507433] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 1.515506] at24 2-0054: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.523250] at24 2-0055: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.530939] at24 2-0056: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.538622] at24 2-0057: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.545903] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz [ 1.553571] hctosys: unable to open rtc device (rtc0) [ 1.564359] Waiting for root device /dev/mmcblk0p2... [ 1.599788] mmc1: new high speed MMC card at address 0001 [ 1.606249] mmcblk1: mmc1:0001 MMC02G 1.79 GiB [ 1.611319] mmcblk1boot0: mmc1:0001 MMC02G partition 1 1.00 MiB [ 1.617802] mmcblk1boot1: mmc1:0001 MMC02G partition 2 1.00 MiB [ 1.626242] mmcblk1: p1 p2

[PYBOOT] [bbb 02:02]: Timed out waiting for "<type 'str'>":

[PYBOOT] [bbb 02:03]: got exception: timeout ~$off

[PYBOOT] [bbb 02:04]: Done. Board bbb-arm-omap2plus_defconfig failure log: -------------------------------------------------

[ 2.051166] omap_hsmmc 481d8000.mmc: lookup for GPIO cd failed [ 2.057284] omap_hsmmc 481d8000.mmc: GPIO lookup for consumer wp [ 2.063607] omap_hsmmc 481d8000.mmc: using device tree for GPIO lookup [ 2.070481] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@481d8000[0]' [ 2.080075] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@481d8000[0]' [ 2.089570] omap_hsmmc 481d8000.mmc: using lookup tables for GPIO lookup [ 2.096585] omap_hsmmc 481d8000.mmc: lookup for GPIO wp failed [ 2.139955] ledtrig-cpu: registered to indicate activity on CPUs [ 2.148649] oprofile: using arm/armv7 [ 2.153804] Initializing XFRM netlink socket [ 2.158901] NET: Registered protocol family 10 [ 2.169792] sit: IPv6 over IPv4 tunneling driver [ 2.178599] NET: Registered protocol family 17 [ 2.183546] NET: Registered protocol family 15 [ 2.188796] Key type dns_resolver registered [ 2.193656] omap_voltage_late_init: Voltage driver support not added [ 2.200390] sr_dev_init: No voltage domain specified for smartreflex0. Cannot initialize [ 2.208855] sr_dev_init: No voltage domain specified for smartreflex1. Cannot initialize [ 2.219121] ThumbEE CPU extension supported. [ 2.223776] Registering SWP/SWPB emulation handler [ 2.228809] SmartReflex Class3 initialized [ 2.298502] tps65217 0-0024: TPS65217 ID 0xe version 1.2 [ 2.305840] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 2.316424] mmc1: new high speed MMC card at address 0001 [ 2.328623] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz [ 2.337003] mmcblk1: mmc1:0001 MMC02G 1.79 GiB [ 2.344841] hctosys: unable to open rtc device (rtc0) [ 2.350295] sr_init: No PMIC hook to init smartreflex [ 2.355955] sr_init: platform driver register failed for SR [ 2.396639] mmcblk1boot0: mmc1:0001 MMC02G partition 1 1.00 MiB [ 2.404635] mmcblk1boot1: mmc1:0001 MMC02G partition 2 1.00 MiB [ 2.418981] mmcblk1: p1 p2 [ 2.436463] Waiting for root device /dev/mmcblk0p2...

[PYBOOT] [bbb 01:51]: Timed out waiting for "<type 'str'>":

[PYBOOT] [bbb 01:52]: got exception: timeout ~$off

[PYBOOT] [bbb 01:53]: Done. Board beagleboard-x15-arm-multi_lpae_defconfig failure log: -------------------------------------------------

[ 1.583069] sit: IPv6 over IPv4 tunneling driver [ 1.588380] NET: Registered protocol family 17 [ 1.593054] can: controller area network core (rev 20120528 abi 9) [ 1.599569] NET: Registered protocol family 29 [ 1.604226] can: raw protocol (rev 20120528) [ 1.608703] can: broadcast manager protocol (rev 20120528 t) [ 1.614642] can: netlink gateway (rev 20130117) max_hops=1 [ 1.620677] Key type dns_resolver registered [ 1.625241] omap_voltage_late_init: Voltage driver support not added [ 1.632461] Power Management for TI OMAP4+ devices. [ 1.637752] ThumbEE CPU extension supported. [ 1.642240] Registering SWP/SWPB emulation handler [ 1.649044] palmas 0-0058: Irq flag is 0x00000008 [ 1.672228] palmas 0-0058: Muxing GPIO 2f, PWM 0, LED 0 [ 1.702597] palmas-rtc 48070000.i2c:tps659038@58:tps659038_rtc: rtc core: registered 48070000.i2c:tps659 as rtc1 [ 1.717285] at24 0-0050: 4096 byte 24c32 EEPROM, writable, 1 bytes/write [ 1.724351] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 1.750573] rtc-ds1307 2-006f: SET TIME! [ 1.756321] rtc-ds1307 2-006f: rtc core: registered mcp7941x as rtc0 [ 1.762987] rtc-ds1307 2-006f: 'wakeup-source' is set, request for an IRQ is disabled! [ 1.771284] rtc-ds1307 2-006f: 64 bytes nvram [ 1.775888] omap_i2c 48060000.i2c: bus 2 rev0.12 at 400 kHz [ 1.784951] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 1.821145] vdd_3v3: supplied by regen1 [ 1.858460] rtc-ds1307 2-006f: setting system clock to 2001-01-01 00:00:00 UTC (978307200) [ 1.876355] aic_dvdd_fixed: disabling [ 1.881069] ldousb: disabling [ 1.885167] Waiting for root device /dev/mmcblk0p1... [ 1.912232] mmc1: new high speed MMC card at address 0001 [ 1.918199] mmcblk1: mmc1:0001 S10004 3.56 GiB [ 1.923088] mmcblk1boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 1.929429] mmcblk1boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 1.936295] mmcblk1: p1

[PYBOOT] [beagleboard-x15 01:46]: Timed out waiting for "<type 'str'>":

[PYBOOT] [beagleboard-x15 01:47]: got exception: timeout ~$off

[PYBOOT] [beagleboard-x15 01:49]: Done. Board beagleboard-x15-arm-multi_v7_defconfig failure log: -------------------------------------------------

[ 1.588072] sit: IPv6 over IPv4 tunneling driver [ 1.593381] NET: Registered protocol family 17 [ 1.598052] can: controller area network core (rev 20120528 abi 9) [ 1.604564] NET: Registered protocol family 29 [ 1.609227] can: raw protocol (rev 20120528) [ 1.613696] can: broadcast manager protocol (rev 20120528 t) [ 1.619632] can: netlink gateway (rev 20130117) max_hops=1 [ 1.625674] Key type dns_resolver registered [ 1.630239] omap_voltage_late_init: Voltage driver support not added [ 1.637454] Power Management for TI OMAP4+ devices. [ 1.642755] ThumbEE CPU extension supported. [ 1.647249] Registering SWP/SWPB emulation handler [ 1.654064] palmas 0-0058: Irq flag is 0x00000008 [ 1.677228] palmas 0-0058: Muxing GPIO 2f, PWM 0, LED 0 [ 1.707571] palmas-rtc 48070000.i2c:tps659038@58:tps659038_rtc: rtc core: registered 48070000.i2c:tps659 as rtc1 [ 1.722250] at24 0-0050: 4096 byte 24c32 EEPROM, writable, 1 bytes/write [ 1.729322] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 1.755562] rtc-ds1307 2-006f: SET TIME! [ 1.761315] rtc-ds1307 2-006f: rtc core: registered mcp7941x as rtc0 [ 1.767976] rtc-ds1307 2-006f: 'wakeup-source' is set, request for an IRQ is disabled! [ 1.776282] rtc-ds1307 2-006f: 64 bytes nvram [ 1.780878] omap_i2c 48060000.i2c: bus 2 rev0.12 at 400 kHz [ 1.789929] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 1.826140] vdd_3v3: supplied by regen1 [ 1.863442] rtc-ds1307 2-006f: setting system clock to 2001-01-01 00:00:00 UTC (978307200) [ 1.880578] aic_dvdd_fixed: disabling [ 1.884596] ldousb: disabling [ 1.888680] Waiting for root device /dev/mmcblk0p1... [ 1.917144] mmc1: new high speed MMC card at address 0001 [ 1.923112] mmcblk1: mmc1:0001 S10004 3.56 GiB [ 1.928011] mmcblk1boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 1.934356] mmcblk1boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 1.941221] mmcblk1: p1

[PYBOOT] [beagleboard-x15 01:41]: Timed out waiting for "<type 'str'>":

[PYBOOT] [beagleboard-x15 01:42]: got exception: timeout ~$off

[PYBOOT] [beagleboard-x15 01:43]: Done. Board beagleboard-x15-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------

[ 1.463755] sit: IPv6 over IPv4 tunneling driver [ 1.468955] NET: Registered protocol family 17 [ 1.473624] can: controller area network core (rev 20120528 abi 9) [ 1.480127] NET: Registered protocol family 29 [ 1.484786] can: raw protocol (rev 20120528) [ 1.489258] can: broadcast manager protocol (rev 20120528 t) [ 1.495189] can: netlink gateway (rev 20130117) max_hops=1 [ 1.501152] Key type dns_resolver registered [ 1.505709] omap_voltage_late_init: Voltage driver support not added [ 1.512671] Power Management for TI OMAP4+ devices. [ 1.517942] ThumbEE CPU extension supported. [ 1.522522] ata1: SATA link down (SStatus 0 SControl 300) [ 1.529464] palmas 0-0058: Irq flag is 0x00000008 [ 1.554667] palmas 0-0058: Muxing GPIO 2f, PWM 0, LED 0 [ 1.582433] palmas-rtc 48070000.i2c:tps659038@58:tps659038_rtc: rtc core: registered 48070000.i2c:tps659 as rtc1 [ 1.595999] at24 0-0050: 4096 byte 24c32 EEPROM, writable, 1 bytes/write [ 1.603053] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 1.628218] rtc-ds1307 2-006f: SET TIME! [ 1.633848] rtc-ds1307 2-006f: rtc core: registered mcp7941x as rtc0 [ 1.640513] rtc-ds1307 2-006f: 'wakeup-source' is set, request for an IRQ is disabled! [ 1.648811] rtc-ds1307 2-006f: 64 bytes nvram [ 1.653395] omap_i2c 48060000.i2c: bus 2 rev0.12 at 400 kHz [ 1.661171] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 1.693426] vdd_3v3: supplied by regen1 [ 1.726895] rtc-ds1307 2-006f: setting system clock to 2001-01-01 00:00:00 UTC (978307200) [ 1.739740] aic_dvdd_fixed: disabling [ 1.744720] ldousb: disabling [ 1.748581] Waiting for root device /dev/mmcblk0p1... [ 1.794757] mmc1: new high speed MMC card at address 0001 [ 1.800621] mmcblk1: mmc1:0001 S10004 3.56 GiB [ 1.805471] mmcblk1boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 1.811754] mmcblk1boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 1.818535] mmcblk1: p1

[PYBOOT] [beagleboard-x15 02:01]: Timed out waiting for "<type 'str'>":

[PYBOOT] [beagleboard-x15 02:02]: got exception: timeout ~$off

[PYBOOT] [beagleboard-x15 02:03]: Done. Board beagleboard-x15-arm-omap2plus_defconfig failure log: -------------------------------------------------

[ 2.174883] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 2.181754] of_get_named_gpiod_flags: parsed 'cd-gpios' property of node '/ocp/mmc@4809c000[0]' - status (0) [ 2.192148] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 2.197009] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer wp [ 2.203326] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 2.210176] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@4809c000[0]' [ 2.219760] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@4809c000[0]' [ 2.229258] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 2.236311] omap_hsmmc 4809c000.mmc: lookup for GPIO wp failed [ 2.283435] omap_hsmmc 480b4000.mmc: GPIO lookup for consumer cd [ 2.289734] omap_hsmmc 480b4000.mmc: using device tree for GPIO lookup [ 2.296604] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/ocp/mmc@480b4000[0]' [ 2.306194] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/ocp/mmc@480b4000[0]' [ 2.315697] omap_hsmmc 480b4000.mmc: using lookup tables for GPIO lookup [ 2.322742] omap_hsmmc 480b4000.mmc: lookup for GPIO cd failed [ 2.328862] omap_hsmmc 480b4000.mmc: GPIO lookup for consumer wp [ 2.335175] omap_hsmmc 480b4000.mmc: using device tree for GPIO lookup [ 2.342023] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@480b4000[0]' [ 2.351609] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@480b4000[0]' [ 2.361104] omap_hsmmc 480b4000.mmc: using lookup tables for GPIO lookup [ 2.368147] omap_hsmmc 480b4000.mmc: lookup for GPIO wp failed [ 2.374823] vdd_3v3: supplied by regen1 [ 2.413891] hctosys: unable to open rtc device (rtc0) [ 2.419198] sr_init: No PMIC hook to init smartreflex [ 2.424747] sr_init: platform driver register failed for SR [ 2.471559] aic_dvdd_fixed: disabling [ 2.475790] ldousb: disabling [ 2.480178] mmc1: new high speed MMC card at address 0001 [ 2.488056] mmcblk1: mmc1:0001 S10004 3.56 GiB [ 2.493380] mmcblk1boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 2.500131] mmcblk1boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 2.508588] mmcblk1: p1 [ 2.515836] Waiting for root device /dev/mmcblk0p1...

[PYBOOT] [beagleboard-x15 01:41]: Timed out waiting for "<type 'str'>":

[PYBOOT] [beagleboard-x15 01:42]: got exception: timeout ~$off

[PYBOOT] [beagleboard-x15 01:43]: Done. Board beaver-arm-multi_v7_defconfig failure log: -------------------------------------------------

[ 3.173462] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 3.179045] r8169 0000:01:00.0: enabling device (0140 -> 0143) [ 3.185758] r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xf09f2000, 02:04:4b:01:60:99, XID 0c900800 IRQ 375 [ 3.195757] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 3.205167] +VDD_5V_HDMI: supplied by sys_3v3,vdd_3v3_alw [ 3.210653] vdd_1v8_gen: supplied by vdd_5v_in [ 3.216865] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.223495] [drm] No driver support for vblank timestamp query. [ 3.229435] drm drm: No connectors reported connected with modes [ 3.235443] [drm] Cannot find any crtc or sizes - going 1024x768 [ 3.261739] Console: switching to colour frame buffer device 128x48 [ 3.273772] drm drm: fb0: frame buffer device [ 3.288807] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.297405] usb3_vbus: supplied by vdd_5v_in [ 3.303849] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 3.310307] tegra-ehci 7d004000.usb: EHCI Host Controller [ 3.315716] tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1 [ 3.323560] tegra-ehci 7d004000.usb: irq 343, io mem 0x7d004000 [ 3.338816] tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.00 [ 3.346046] hub 1-0:1.0: USB hub found [ 3.349819] hub 1-0:1.0: 1 port detected [ 3.354711] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.360121] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 3.367856] tegra-ehci 7d008000.usb: irq 344, io mem 0x7d008000 [ 3.378808] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.00 [ 3.385949] hub 2-0:1.0: USB hub found [ 3.389717] hub 2-0:1.0: 1 port detected [ 3.400074] tps65910-rtc tps65910-rtc: setting system clock to 2000-01-01 00:00:02 UTC (946684802) [ 3.413663] vdd_sata,avdd_plle: disabling [ 3.418466] usb1_vbus: disabling [ 3.422581] Waiting for root device /dev/mmcblk0p1... [ 3.703813] usb 2-1: new high-speed USB device number 2 using tegra-ehci [ 4.649331] asix 2-1:1.0 eth1: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 58:6d:8f:50:ba:18

[PYBOOT] [beaver 01:52]: Timed out waiting for "<type 'str'>":

[PYBOOT] [beaver 01:53]: got exception: timeout ~$off

[PYBOOT] [beaver 01:54]: Done. Board beaver-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------

[ 3.122771] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 3.128353] r8169 0000:01:00.0: enabling device (0140 -> 0143) [ 3.134966] r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xf087e000, 02:04:4b:01:60:99, XID 0c900800 IRQ 375 [ 3.144957] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 3.154146] +VDD_5V_HDMI: supplied by sys_3v3,vdd_3v3_alw [ 3.159619] vdd_1v8_gen: supplied by vdd_5v_in [ 3.165288] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.171898] [drm] No driver support for vblank timestamp query. [ 3.177826] drm drm: No connectors reported connected with modes [ 3.183826] [drm] Cannot find any crtc or sizes - going 1024x768 [ 3.203131] Console: switching to colour frame buffer device 128x48 [ 3.214913] drm drm: fb0: frame buffer device [ 3.219349] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.227321] usb3_vbus: supplied by vdd_5v_in [ 3.233597] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 3.240044] tegra-ehci 7d004000.usb: EHCI Host Controller [ 3.245447] tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1 [ 3.253163] tegra-ehci 7d004000.usb: irq 343, io mem 0x7d004000 [ 3.267857] tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.00 [ 3.274228] hub 1-0:1.0: USB hub found [ 3.277995] hub 1-0:1.0: 1 port detected [ 3.282672] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.288080] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 3.295739] tegra-ehci 7d008000.usb: irq 344, io mem 0x7d008000 [ 3.307853] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.00 [ 3.314122] hub 2-0:1.0: USB hub found [ 3.317879] hub 2-0:1.0: 1 port detected [ 3.325388] tps65910-rtc tps65910-rtc: setting system clock to 2000-01-01 00:00:01 UTC (946684801) [ 3.338461] vdd_sata,avdd_plle: disabling [ 3.342856] usb1_vbus: disabling [ 3.346787] Waiting for root device /dev/mmcblk0p1... [ 3.627860] usb 2-1: new high-speed USB device number 2 using tegra-ehci [ 4.566449] asix 2-1:1.0 eth1: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 58:6d:8f:50:ba:18

[PYBOOT] [beaver 01:53]: Timed out waiting for "<type 'str'>":

[PYBOOT] [beaver 01:54]: got exception: timeout ~$off

[PYBOOT] [beaver 01:56]: Done. Board beaver-arm-tegra_defconfig failure log: -------------------------------------------------

[ 3.434035] r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xf087e000, 02:04:4b:01:60:99, XID 0c900800 IRQ 375 [ 3.444040] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 3.452921] +VDD_5V_HDMI: supplied by sys_3v3,vdd_3v3_alw [ 3.458435] vdd_1v8_gen: supplied by vdd_5v_in [ 3.467309] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.473926] [drm] No driver support for vblank timestamp query. [ 3.479929] drm drm: No connectors reported connected with modes [ 3.485942] [drm] Cannot find any crtc or sizes - going 1024x768 [ 3.511927] Console: switching to colour frame buffer device 128x48 [ 3.523774] drm drm: fb0: frame buffer device [ 3.550519] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.558039] usb3_vbus: supplied by vdd_5v_in [ 3.564176] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 3.570643] tegra-ehci 7d004000.usb: EHCI Host Controller [ 3.576067] tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1 [ 3.584052] tegra-ehci 7d004000.usb: irq 343, io mem 0x7d004000 [ 3.600529] tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.00 [ 3.608250] hub 1-0:1.0: USB hub found [ 3.612032] hub 1-0:1.0: 1 port detected [ 3.616850] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.622277] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 3.630151] tegra-ehci 7d008000.usb: irq 344, io mem 0x7d008000 [ 3.650520] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.00 [ 3.658124] hub 2-0:1.0: USB hub found [ 3.661899] hub 2-0:1.0: 1 port detected [ 3.670219] tps65910-rtc tps65910-rtc: setting system clock to 2000-01-01 00:00:02 UTC (946684802) [ 3.688933] vdd_sata,avdd_plle: disabling [ 3.693459] usb1_vbus: disabling [ 3.696885] ALSA device list: [ 3.699841] #0: NVIDIA Tegra Beaver [ 3.704079] Waiting for root device /dev/mmcblk0p1... [ 3.980525] usb 2-1: new high-speed USB device number 2 using tegra-ehci [ 4.965816] asix 2-1:1.0 eth1: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 58:6d:8f:50:ba:18

[PYBOOT] [beaver 01:42]: Timed out waiting for "<type 'str'>":

[PYBOOT] [beaver 01:43]: got exception: timeout ~$off

[PYBOOT] [beaver 01:44]: Done. Board colibri-vf61-arm-multi_v7_defconfig failure log: -------------------------------------------------

[....] Checking file systems...fsck from util-linux 2.20.1 [?25l[?1c7[ ok 8[?25h[?0cdone. [....] Mounting local filesystems...[?25l[?1c7[ ok 8[?25h[?0cdone. [....] Activating swapfile swap...[?25l[?1c7[ ok 8[?25h[?0cdone. [....] Cleaning up temporary files...[?25l[?1c7[ ok 8[?25h[?0c. [....] Setting kernel variables ...[?25l[?1c7[ ok 8[?25h[?0cdone. [....] Configuring network interfaces...Internet Systems Consortium DHCP Client 4.2.2 Copyright 2004-2011 Internet Systems Consortium. All rights reserved. For info, please visit https://www.isc.org/software/dhcp/

[ 16.005301] Micrel KSZ8041 400d1000.etherne:00: attached PHY driver [Micrel KSZ8041] (mii_bus:phy_addr=400d1000.etherne:00, irq=-1) [ 16.017469] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready Listening on LPF/eth0/00:14:2d:49:a0:5c Sending on LPF/eth0/00:14:2d:49:a0:5c Sending on Socket/fallback DHCPREQUEST on eth0 to 255.255.255.255 port 67 [ 19.005717] fec 400d1000.ethernet eth0: Link is Up - 100Mbps/Full - flow control off [ 19.013679] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready DHCPREQUEST on eth0 to 255.255.255.255 port 67 DHCPACK from 172.16.20.1 bound to 172.16.20.168 -- renewal in 35205 seconds. [?25l[?1c7[ ok 8[?25h[?0cdone. [....] Cleaning up temporary files...[?25l[?1c7[ ok 8[?25h[?0c. INIT: Entering ruNIT: l:[39;4[infoakefi9m] Using mncurrle-style co runlent boot in runlevel ing [....] Starslogdenhanced syslogd: rsyslogd[?25l[?1c[39;4[ ok 49m8[?25h[?0M paNo apache Mlledckage instalting [....] Starmmandperiodic co cron scheduler:7[1[?25l[?1c[ ok [?0c49m8[?25htarti. [....] Sessagng system m[?25e bus: dbusG[?25l[?1c[39;4[ ok 8[?25h[?0c. [.freq Loading cpules..kernel modules...[?25l[?1c[39;4[ ok 8[?25h[?0cdone (none). [..itieCPUFreq Utiondems: Setting goveand CPUFreq governoverndisabled, glableor not avai?1c7...[?25lk [[ 25h8[?25h[?0cdone. [..nBSDStarting Opll se Secure Shell server: sshd[?25l[?1c[39;4[ ok 8[?25h[?0c.

DebianolibrLinux 7.0 cP0 i-vf61 ttyLP1

colibri-vf61 lo [PYBOOT] [colibri-vf61 03:12]: Timed out waiting for "<type 'str'>":

[PYBOOT] [colibri-vf61 03:13]: got exception: timeout ~$off

[PYBOOT] [colibri-vf61 03:14]: Done. Board colombus-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------

[....] Synthesizing the initial hotplug events...[?25l[?1c7[ ok 8[?25h[?0cdone. [....] Waiting for /dev to be fully populated...[?25l[?1c7[ ok 8[?25h[?0cdone. [....] Activating swap...[?25l[?1c7[ ok 8[?25h[?0cdone. [ 42.331754] EXT4-fs (mmcblk0p1): warning: mounting fs with errors, running e2fsck is recommended [ 42.371561] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [....] Cleaning up temporary files... /tmp[?25l[?1c7[ ok 8[?25h[?0c. [....] Activating lvm and md swap...[?25l[?1c7[ ok 8[?25h[?0cdone. [....] Checking file systems...fsck from util-linux 2.20.1 [?25l[?1c7[ ok 8[?25h[?0cdone. [....] Mounting local filesystems...[?25l[?1c7[ ok 8[?25h[?0cdone. [....] Activating swapfile swap...[?25l[?1c7[ ok 8[?25h[?0cdone. [....] Cleaning up temporary files...[?25l[?1c7[ ok 8[?25h[?0c. [....] Setting kernel variables ...[?25l[?1c7[ ok 8[?25h[?0cdone. [ 85.993326] random: dd urandom read with 57 bits of entropy available [....] Configuring network interfaces...Internet Systems Consortium DHCP Client 4.2.2 Copyright 2004-2011 Internet Systems Consortium. All rights reserved. For info, please visit https://www.isc.org/software/dhcp/

[ 90.413172] eth0: device MAC address a2:45:b4:43:af:0c [ 90.567422] RX IPC Checksum Offload disabled [ 90.572045] No MAC Management Counters available [ 90.577836] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready Listening on LPF/eth0/a2:45:b4:43:af:0c Sending on LPF/eth0/a2:45:b4:43:af:0c Sending on Socket/fallback DHCPREQUEST on eth0 to 255.255.255.255 port 67 DHCPREQUEST on eth0 to 255.255.255.255 port 67 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 5 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 5 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 14 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 21

[PYBOOT] [colombus 03:17]: Timed out waiting for "<type 'str'>": DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 16

[PYBOOT] [colombus 03:18]: got exception: timeout ~$off

[PYBOOT] [colombus 03:19]: Done. Board cosmic-arm-imx_v6_v7_defconfig failure log: -------------------------------------------------

[ 14.434674] blk_update_request: I/O error, dev mmcblk0, sector 3633185 [ 18.508866] mmcblk0: error -110 transferring data, sector 3633186, nr 230, cmd response 0x900, card status 0x0 [ 18.519192] blk_update_request: I/O error, dev mmcblk0, sector 3633186 [ 22.593445] mmcblk0: error -110 transferring data, sector 3633187, nr 229, cmd response 0x900, card status 0x0 [ 22.603843] blk_update_request: I/O error, dev mmcblk0, sector 3633187 [ 26.678037] mmcblk0: error -110 transferring data, sector 3633188, nr 228, cmd response 0x900, card status 0x0 [ 26.688370] blk_update_request: I/O error, dev mmcblk0, sector 3633188 [ 30.762616] mmcblk0: error -110 transferring data, sector 3633189, nr 227, cmd response 0x900, card status 0x0 [ 30.772940] blk_update_request: I/O error, dev mmcblk0, sector 3633189 [ 34.847177] mmcblk0: error -110 transferring data, sector 3633190, nr 226, cmd response 0x900, card status 0x0 [ 34.857504] blk_update_request: I/O error, dev mmcblk0, sector 3633190 [ 38.931750] mmcblk0: error -110 transferring data, sector 3633191, nr 225, cmd response 0x900, card status 0x0 [ 38.942082] blk_update_request: I/O error, dev mmcblk0, sector 3633191 [ 43.016346] mmcblk0: error -110 transferring data, sector 3633192, nr 224, cmd response 0x900, card status 0x0 [ 43.026676] blk_update_request: I/O error, dev mmcblk0, sector 3633192 [ 47.100865] mmcblk0: error -110 transferring data, sector 3633193, nr 223, cmd response 0x900, card status 0x0 [ 47.111191] blk_update_request: I/O error, dev mmcblk0, sector 3633193 [ 51.185433] mmcblk0: error -110 transferring data, sector 3633194, nr 222, cmd response 0x900, card status 0x0 [ 51.195780] blk_update_request: I/O error, dev mmcblk0, sector 3633194 [ 55.270073] mmcblk0: error -110 transferring data, sector 3633195, nr 221, cmd response 0x900, card status 0x0 [ 55.280393] blk_update_request: I/O error, dev mmcblk0, sector 3633195 [ 59.354631] mmcblk0: error -110 transferring data, sector 3633196, nr 220, cmd response 0x900, card status 0x0 [ 59.364955] blk_update_request: I/O error, dev mmcblk0, sector 3633196 [ 63.439146] mmcblk0: error -110 transferring data, sector 3633197, nr 219, cmd response 0x900, card status 0x0 [ 63.449475] blk_update_request: I/O error, dev mmcblk0, sector 3633197 [ 67.523869] mmcblk0: error -110 transferring data, sector 3633198, nr 218, cmd response 0x900, card status 0x0 [ 67.534188] blk_update_request: I/O error, dev mmcblk0, sector 3633198 [ 71.608374] mmcblk0: error -110 transferring data, sector 3633199, nr 217, cmd response 0x900, card status 0x0 [ 71.618704] blk_update_request: I/O error, dev mmcblk0, sector 3633199 [ 75.692955] mmcblk0: error -110 transferring data, sector 3633200, nr 216, cmd response 0x900, card status 0x0 [ 75.703283] blk_update_request: I/O error, dev mmcblk0, sector 3633200 [ 79.777516] mmcblk0: error -110 transferring data, sector 3633201, nr 215, cmd response 0x900, card status 0x0 [ 79.787847] blk_update_request: I/O error, dev mmcblk0, sector 3633201

[PYBOOT] [cosmic 01:58]: Timed out waiting for "<type 'str'>":

[PYBOOT] [cosmic 01:59]: got exception: timeout ~$off

[PYBOOT] [cosmic 02:00]: Done. Board cosmic-arm-multi_v7_defconfig failure log: -------------------------------------------------

[ 14.066069] blk_update_request: I/O error, dev mmcblk0, sector 3633185 [ 18.140050] mmcblk0: error -110 transferring data, sector 3633186, nr 230, cmd response 0x900, card status 0x0 [ 18.150128] blk_update_request: I/O error, dev mmcblk0, sector 3633186 [ 22.224137] mmcblk0: error -110 transferring data, sector 3633187, nr 229, cmd response 0x900, card status 0x0 [ 22.234214] blk_update_request: I/O error, dev mmcblk0, sector 3633187 [ 26.308196] mmcblk0: error -110 transferring data, sector 3633188, nr 228, cmd response 0x900, card status 0x0 [ 26.318273] blk_update_request: I/O error, dev mmcblk0, sector 3633188 [ 30.392252] mmcblk0: error -110 transferring data, sector 3633189, nr 227, cmd response 0x900, card status 0x0 [ 30.402333] blk_update_request: I/O error, dev mmcblk0, sector 3633189 [ 34.476315] mmcblk0: error -110 transferring data, sector 3633190, nr 226, cmd response 0x900, card status 0x0 [ 34.486394] blk_update_request: I/O error, dev mmcblk0, sector 3633190 [ 38.560380] mmcblk0: error -110 transferring data, sector 3633191, nr 225, cmd response 0x900, card status 0x0 [ 38.570449] blk_update_request: I/O error, dev mmcblk0, sector 3633191 [ 42.644434] mmcblk0: error -110 transferring data, sector 3633192, nr 224, cmd response 0x900, card status 0x0 [ 42.654501] blk_update_request: I/O error, dev mmcblk0, sector 3633192 [ 46.728478] mmcblk0: error -110 transferring data, sector 3633193, nr 223, cmd response 0x900, card status 0x0 [ 46.738552] blk_update_request: I/O error, dev mmcblk0, sector 3633193 [ 50.812565] mmcblk0: error -110 transferring data, sector 3633194, nr 222, cmd response 0x900, card status 0x0 [ 50.822637] blk_update_request: I/O error, dev mmcblk0, sector 3633194 [ 54.896619] mmcblk0: error -110 transferring data, sector 3633195, nr 221, cmd response 0x900, card status 0x0 [ 54.906689] blk_update_request: I/O error, dev mmcblk0, sector 3633195 [ 58.980670] mmcblk0: error -110 transferring data, sector 3633196, nr 220, cmd response 0x900, card status 0x0 [ 58.990740] blk_update_request: I/O error, dev mmcblk0, sector 3633196 [ 63.064723] mmcblk0: error -110 transferring data, sector 3633197, nr 219, cmd response 0x900, card status 0x0 [ 63.074800] blk_update_request: I/O error, dev mmcblk0, sector 3633197 [ 67.148783] mmcblk0: error -110 transferring data, sector 3633198, nr 218, cmd response 0x900, card status 0x0 [ 67.158861] blk_update_request: I/O error, dev mmcblk0, sector 3633198 [ 71.232840] mmcblk0: error -110 transferring data, sector 3633199, nr 217, cmd response 0x900, card status 0x0 [ 71.242920] blk_update_request: I/O error, dev mmcblk0, sector 3633199 [ 75.316903] mmcblk0: error -110 transferring data, sector 3633200, nr 216, cmd response 0x900, card status 0x0 [ 75.326981] blk_update_request: I/O error, dev mmcblk0, sector 3633200 [ 79.400966] mmcblk0: error -110 transferring data, sector 3633201, nr 215, cmd response 0x900, card status 0x0 [ 79.411049] blk_update_request: I/O error, dev mmcblk0, sector 3633201

[PYBOOT] [cosmic 02:15]: Timed out waiting for "<type 'str'>":

[PYBOOT] [cosmic 02:16]: got exception: timeout ~$off

[PYBOOT] [cosmic 02:17]: Done. Board cosmic-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------

[ 13.861670] blk_update_request: I/O error, dev mmcblk0, sector 3633185 [ 17.935587] mmcblk0: error -110 transferring data, sector 3633186, nr 230, cmd response 0x900, card status 0x0 [ 17.945643] blk_update_request: I/O error, dev mmcblk0, sector 3633186 [ 22.019561] mmcblk0: error -110 transferring data, sector 3633187, nr 229, cmd response 0x900, card status 0x0 [ 22.029615] blk_update_request: I/O error, dev mmcblk0, sector 3633187 [ 26.103533] mmcblk0: error -110 transferring data, sector 3633188, nr 228, cmd response 0x900, card status 0x0 [ 26.113590] blk_update_request: I/O error, dev mmcblk0, sector 3633188 [ 30.187505] mmcblk0: error -110 transferring data, sector 3633189, nr 227, cmd response 0x900, card status 0x0 [ 30.197562] blk_update_request: I/O error, dev mmcblk0, sector 3633189 [ 34.271481] mmcblk0: error -110 transferring data, sector 3633190, nr 226, cmd response 0x900, card status 0x0 [ 34.281545] blk_update_request: I/O error, dev mmcblk0, sector 3633190 [ 38.355460] mmcblk0: error -110 transferring data, sector 3633191, nr 225, cmd response 0x900, card status 0x0 [ 38.365527] blk_update_request: I/O error, dev mmcblk0, sector 3633191 [ 42.439450] mmcblk0: error -110 transferring data, sector 3633192, nr 224, cmd response 0x900, card status 0x0 [ 42.449517] blk_update_request: I/O error, dev mmcblk0, sector 3633192 [ 46.523429] mmcblk0: error -110 transferring data, sector 3633193, nr 223, cmd response 0x900, card status 0x0 [ 46.533475] blk_update_request: I/O error, dev mmcblk0, sector 3633193 [ 50.607390] mmcblk0: error -110 transferring data, sector 3633194, nr 222, cmd response 0x900, card status 0x0 [ 50.617441] blk_update_request: I/O error, dev mmcblk0, sector 3633194 [ 54.691353] mmcblk0: error -110 transferring data, sector 3633195, nr 221, cmd response 0x900, card status 0x0 [ 54.701403] blk_update_request: I/O error, dev mmcblk0, sector 3633195 [ 58.775316] mmcblk0: error -110 transferring data, sector 3633196, nr 220, cmd response 0x900, card status 0x0 [ 58.785370] blk_update_request: I/O error, dev mmcblk0, sector 3633196 [ 62.859279] mmcblk0: error -110 transferring data, sector 3633197, nr 219, cmd response 0x900, card status 0x0 [ 62.869334] blk_update_request: I/O error, dev mmcblk0, sector 3633197 [ 66.943251] mmcblk0: error -110 transferring data, sector 3633198, nr 218, cmd response 0x900, card status 0x0 [ 66.953307] blk_update_request: I/O error, dev mmcblk0, sector 3633198 [ 71.027227] mmcblk0: error -110 transferring data, sector 3633199, nr 217, cmd response 0x900, card status 0x0 [ 71.037281] blk_update_request: I/O error, dev mmcblk0, sector 3633199 [ 75.111199] mmcblk0: error -110 transferring data, sector 3633200, nr 216, cmd response 0x900, card status 0x0 [ 75.121254] blk_update_request: I/O error, dev mmcblk0, sector 3633200 [ 79.195169] mmcblk0: error -110 transferring data, sector 3633201, nr 215, cmd response 0x900, card status 0x0 [ 79.205228] blk_update_request: I/O error, dev mmcblk0, sector 3633201

[PYBOOT] [cosmic 02:10]: Timed out waiting for "<type 'str'>":

[PYBOOT] [cosmic 02:11]: got exception: timeout ~$off

[PYBOOT] [cosmic 02:12]: Done. Board dalmore-arm-multi_lpae_defconfig failure log: -------------------------------------------------

[ 2.486419] Key type dns_resolver registered [ 2.492788] ThumbEE CPU extension supported. [ 2.497209] Registering SWP/SWPB emulation handler [ 2.529772] vdd-sys-5v0: supplied by vdd_ac_bat [ 2.536900] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 2.546380] vdd_hdmi_5v0: supplied by vdd-sys-5v0 [ 2.562291] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.569042] [drm] No driver support for vblank timestamp query. [ 2.588885] mmc1: new high speed MMC card at address 0001 [ 2.598711] mmcblk1: mmc1:0001 SEM32G 29.1 GiB [ 2.607074] mmcblk1boot0: mmc1:0001 SEM32G partition 1 4.00 MiB [ 2.615811] mmcblk1boot1: mmc1:0001 SEM32G partition 2 4.00 MiB [ 2.625655] mmcblk1rpmb: mmc1:0001 SEM32G partition 3 4.00 MiB [ 2.636983] mmcblk1: p1 [ 2.748680] Console: switching to colour frame buffer device 240x75 [ 2.835490] drm drm: fb0: frame buffer device [ 2.854103] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 2.864178] usb2_vbus: supplied by vdd-sys-5v0 [ 2.875763] tegra-ehci 7d008000.usb: EHCI Host Controller [ 2.881356] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 2.890212] tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 [ 2.904119] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 2.914417] hub 1-0:1.0: USB hub found [ 2.918431] hub 1-0:1.0: 1 port detected [ 2.928552] input: gpio-keys as /devices/soc0/gpio-keys/input/input0 [ 2.942389] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 3.004562] dvdd_ts: disabling [ 3.007662] usb1_vbus: disabling [ 3.011017] vdd_cam_1v8_reg: disabling [ 3.018447] Waiting for root device /dev/mmcblk0p1... [ 3.229122] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 4.207780] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f [ 49.244082] random: nonblocking pool is initialized

[PYBOOT] [dalmore 02:04]: Timed out waiting for "<type 'str'>":

[PYBOOT] [dalmore 02:05]: got exception: timeout ~$off

[PYBOOT] [dalmore 02:06]: Done. Board dalmore-arm-multi_v7_defconfig failure log: -------------------------------------------------

[ 2.486805] Key type dns_resolver registered [ 2.493183] ThumbEE CPU extension supported. [ 2.497606] Registering SWP/SWPB emulation handler [ 2.525916] vdd-sys-5v0: supplied by vdd_ac_bat [ 2.532097] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 2.542265] vdd_hdmi_5v0: supplied by vdd-sys-5v0 [ 2.558632] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.565393] [drm] No driver support for vblank timestamp query. [ 2.581068] mmc1: new high speed MMC card at address 0001 [ 2.591055] mmcblk1: mmc1:0001 SEM32G 29.1 GiB [ 2.597653] mmcblk1boot0: mmc1:0001 SEM32G partition 1 4.00 MiB [ 2.606383] mmcblk1boot1: mmc1:0001 SEM32G partition 2 4.00 MiB [ 2.614972] mmcblk1rpmb: mmc1:0001 SEM32G partition 3 4.00 MiB [ 2.626441] mmcblk1: p1 [ 2.743674] Console: switching to colour frame buffer device 240x75 [ 2.830677] drm drm: fb0: frame buffer device [ 2.849071] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 2.859182] usb2_vbus: supplied by vdd-sys-5v0 [ 2.870779] tegra-ehci 7d008000.usb: EHCI Host Controller [ 2.876377] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 2.885158] tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 [ 2.899086] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 2.909364] hub 1-0:1.0: USB hub found [ 2.913377] hub 1-0:1.0: 1 port detected [ 2.923468] input: gpio-keys as /devices/soc0/gpio-keys/input/input0 [ 2.937344] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 2.999470] dvdd_ts: disabling [ 3.002571] usb1_vbus: disabling [ 3.005928] vdd_cam_1v8_reg: disabling [ 3.013348] Waiting for root device /dev/mmcblk0p1... [ 3.224085] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 4.201797] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f [ 49.439045] random: nonblocking pool is initialized

[PYBOOT] [dalmore 02:02]: Timed out waiting for "<type 'str'>":

[PYBOOT] [dalmore 02:03]: got exception: timeout ~$off

[PYBOOT] [dalmore 02:04]: Done. Board dalmore-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------

[ 2.047486] can: broadcast manager protocol (rev 20120528 t) [ 2.053238] can: netlink gateway (rev 20130117) max_hops=1 [ 2.059943] Key type dns_resolver registered [ 2.065067] ThumbEE CPU extension supported. [ 2.097106] vdd-sys-5v0: supplied by vdd_ac_bat [ 2.102049] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 2.112129] vdd_hdmi_5v0: supplied by vdd-sys-5v0 [ 2.134249] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.140932] [drm] No driver support for vblank timestamp query. [ 2.304232] Console: switching to colour frame buffer device 240x75 [ 2.391708] drm drm: fb0: frame buffer device [ 2.396446] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 2.404529] usb2_vbus: supplied by vdd-sys-5v0 [ 2.413499] tegra-ehci 7d008000.usb: EHCI Host Controller [ 2.419067] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 2.426973] mmc1: new high speed MMC card at address 0001 [ 2.433651] mmcblk1: mmc1:0001 SEM32G 29.1 GiB [ 2.438675] mmcblk1boot0: mmc1:0001 SEM32G partition 1 4.00 MiB [ 2.445454] tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 [ 2.451522] mmcblk1boot1: mmc1:0001 SEM32G partition 2 4.00 MiB [ 2.457925] mmcblk1rpmb: mmc1:0001 SEM32G partition 3 4.00 MiB [ 2.464697] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 2.472871] mmcblk1: p1 [ 2.476796] hub 1-0:1.0: USB hub found [ 2.483839] hub 1-0:1.0: 1 port detected [ 2.493651] input: gpio-keys as /devices/soc0/gpio-keys/input/input0 [ 2.505033] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 2.543988] dvdd_ts: disabling [ 2.547142] usb1_vbus: disabling [ 2.550424] vdd_cam_1v8_reg: disabling [ 2.555886] Waiting for root device /dev/mmcblk0p1... [ 2.800630] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 3.752652] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f

[PYBOOT] [dalmore 01:49]: Timed out waiting for "<type 'str'>":

[PYBOOT] [dalmore 01:50]: got exception: timeout ~$off

[PYBOOT] [dalmore 01:51]: Done. Board dalmore-arm-tegra_defconfig failure log: -------------------------------------------------

[ 2.679784] Bluetooth: RFCOMM ver 1.11 [ 2.683727] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 2.689123] Bluetooth: BNEP socket layer initialized [ 2.694213] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 2.700212] Bluetooth: HIDP socket layer initialized [ 2.707224] Key type dns_resolver registered [ 2.716831] Registering SWP/SWPB emulation handler [ 2.747194] vdd-sys-5v0: supplied by vdd_ac_bat [ 2.753509] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 2.761260] vdd_hdmi_5v0: supplied by vdd-sys-5v0 [ 2.785150] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.791943] [drm] No driver support for vblank timestamp query. [ 2.968853] Console: switching to colour frame buffer device 240x75 [ 3.055070] drm drm: fb0: frame buffer device [ 3.082103] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.089371] usb2_vbus: supplied by vdd-sys-5v0 [ 3.097756] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.103568] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 3.112795] tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 [ 3.132113] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 3.146203] hub 1-0:1.0: USB hub found [ 3.150161] hub 1-0:1.0: 1 port detected [ 3.164279] input: gpio-keys as /devices/soc0/gpio-keys/input/input1 [ 3.179387] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:01 UTC (946684801) [ 3.274503] dvdd_ts: disabling [ 3.277605] usb1_vbus: disabling [ 3.280866] vdd_cam_1v8_reg: disabling [ 3.285673] ALSA device list: [ 3.288689] #0: NVIDIA Tegra Dalmore [ 3.294737] Waiting for root device /dev/mmcblk0p1... [ 3.471986] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 4.495769] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f [ 62.569304] random: nonblocking pool is initialized

[PYBOOT] [dalmore 01:45]: Timed out waiting for "<type 'str'>":

[PYBOOT] [dalmore 01:46]: got exception: timeout ~$off

[PYBOOT] [dalmore 01:47]: Done. Board odroidu3-arm-exynos_defconfig failure log: -------------------------------------------------

[ 1.652590] usb 1-3: new high-speed USB device number 2 using exynos-ehci [ 1.661500] dwmmc_exynos 12550000.mmc: allocated mmc-pwrseq [ 1.692632] dwmmc_exynos 12550000.mmc: 1 slots initialized [ 1.693854] usbcore: registered new interface driver usbhid [ 1.699052] usbhid: USB HID core driver [ 1.707761] NET: Registered protocol family 10 [ 1.708380] sit: IPv6 over IPv4 tunneling driver [ 1.711601] NET: Registered protocol family 17 [ 1.715623] NET: Registered protocol family 15 [ 1.720084] Key type dns_resolver registered [ 1.724407] Registering SWP/SWPB emulation handler [ 1.730242] s3c-rtc 10070000.rtc: rtc disabled, re-enabling [ 1.734653] s3c-rtc 10070000.rtc: warning: invalid RTC value so initializing it [ 1.742040] s3c-rtc 10070000.rtc: rtc core: registered s3c as rtc1 [ 1.773149] max98090 1-0010: MAX98090 REVID=0x43 [ 1.775407] max98090 1-0010: use default 2.8v micbias [ 1.778102] mmc_host mmc1: Bus speed (slot 0) = 44000000Hz (slot req 52000000Hz, actual 44000000HZ div = 0) [ 1.787531] mmc_host mmc1: Bus speed (slot 0) = 73333333Hz (slot req 52000000Hz, actual 36666666HZ div = 1) [ 1.796992] mmc1: new DDR MMC card at address 0001 [ 1.801644] asoc-simple-card sound: HiFi <-> 3830000.i2s mapping ok [ 1.802205] mmcblk1: mmc1:0001 008G92 7.28 GiB [ 1.802457] mmcblk1boot0: mmc1:0001 008G92 partition 1 4.00 MiB [ 1.802714] mmcblk1boot1: mmc1:0001 008G92 partition 2 4.00 MiB [ 1.802974] mmcblk1rpmb: mmc1:0001 008G92 partition 3 512 KiB [ 1.812277] mmcblk1: p1 p2 [ 1.835694] input: gpio_keys as /devices/platform/gpio_keys/input/input0 [ 1.872528] max77686-rtc max77686-rtc: setting system clock to 2000-01-01 01:00:20 UTC (946688420) [ 1.893479] VDD10_HDMI_1.0V: disabling [ 1.894186] vdd_g3d: disabling [ 1.895256] BUCK8_2.8V: disabling [ 1.899304] ALSA device list: [ 1.900869] #0: Odroid-U3 [ 1.904640] Waiting for root device /dev/mmcblk0p2...

[PYBOOT] [odroidu3 01:53]: Timed out waiting for "<type 'str'>":

[PYBOOT] [odroidu3 01:54]: got exception: timeout ~$off

[PYBOOT] [odroidu3 01:55]: Done. Board snow-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------

[....] Waiting for /dev to be fully populated...[?25l[?1c7[ ok 8[?25h[?0cdone. [....] Activating swap...[?25l[?1c7[ ok 8[?25h[?0cdone. [ 3.116890] EXT4-fs (mmcblk0p3): warning: mounting fs with errors, running e2fsck is recommended [ 3.125250] EXT4-fs (mmcblk0p3): re-mounted. Opts: (null) [....] Cleaning up temporary files... /tmp[?25l[?1c7[ ok 8[?25h[?0c. [....] Activating lvm and md swap...[?25l[?1c7[ ok 8[?25h[?0cdone. [....] Checking file systems...fsck from util-linux 2.20.1 [?25l[?1c7[ ok 8[?25h[?0cdone. [....] Mounting local filesystems...[?25l[?1c7[ ok 8[?25h[?0cdone. [....] Activating swapfile swap...[?25l[?1c7[ ok 8[?25h[?0cdone. [....] Cleaning up temporary files...[?25l[?1c7[ ok 8[?25h[?0c. [....] Setting kernel variables ...[?25l[?1c7[ ok 8[?25h[?0cdone. [ 4.178000] random: dd urandom read with 58 bits of entropy available [....] Configuring network interfaces...Internet Systems Consortium DHCP Client 4.2.2 Copyright 2004-2011 Internet Systems Consortium. All rights reserved. For info, please visit https://www.isc.org/software/dhcp/

Cannot find device "eth0" Bind socket to interface: No such device Failed to bring up eth0. [?25l[?1c7[ ok 8[?25h[?0cdone. [....] Cleaning up temporary files...[?25l[?1c7[ ok 8[?25h[?0c. INIT: Entering runlevel: 2 [info] Using makefile-style concurrent boot in runlevel 2. [....] Starting enhanced syslogd: rsyslogd[?25l[?1c7[ ok 8[?25h[?0c. [....] Starting web server: apache2apache2: Could not reliably determine the server's fully qualified domain name, using 127.0.0.1 for ServerName [?25l[?1c7[ ok 8[?25h[?0c. [....] Starting periodic command scheduler: cron[?25l[?1c7[ ok 8[?25h[?0c. [....] Starting system message bus: dbus[?25l[?1c7[ ok 8[?25h[?0c. [....] Loading cpufreq kernel modules...[?25l[?1c7[ ok 8[?25h[?0cdone (none). [....] CPUFreq Utilities: Setting ondemand CPUFreq governor...CPU0...[?25l[?1c7[ ok 8[?25h[?0cdone. [....] Starting OpenBSD Secure Shell server: sshd[?25l[?1c7[ ok 8[?25h[?0c.

[PYBOOT] [snow 03:10]: Timed out waiting for "<type 'str'>":

[PYBOOT] [snow 03:11]: got exception: timeout ~$off

[PYBOOT] [snow 03:12]: Done. Board snowball-arm-multi_v7_defconfig failure log: -------------------------------------------------

[ 1.991302] can: controller area network core (rev 20120528 abi 9) [ 1.997558] NET: Registered protocol family 29 [ 2.002044] can: raw protocol (rev 20120528) [ 2.006317] can: broadcast manager protocol (rev 20120528 t) [ 2.011993] can: netlink gateway (rev 20130117) max_hops=1 [ 2.018035] Key type dns_resolver registered [ 2.019927] mmc3: new high speed MMC card at address 0001 [ 2.020416] mmcblk3: mmc3:0001 3.53 GiB [ 2.020629] mmcblk3boot0: mmc3:0001 partition 1 2.00 MiB [ 2.020812] mmcblk3boot1: mmc3:0001 partition 2 2.00 MiB [ 2.020996] mmcblk3rpmb: mmc3:0001 partition 3 128 KiB [ 2.023345] mmcblk3: p1 p2 p3 p4 [ 2.051300] ThumbEE CPU extension supported. [ 2.055603] Registering SWP/SWPB emulation handler [ 2.062896] input: gpio_keys as /devices/soc0/gpio_keys/input/input0 [ 2.069854] rtc-pl031 80154000.rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 2.079071] thermal cooling_device0: thermal-cpufreq-0 bind to 0: 0-succeed [ 2.086090] thermal cooling_device0: thermal-cpufreq-0 bind to 1: 0-succeed [ 2.093078] thermal cooling_device0: thermal-cpufreq-0 bind to 2: 0-succeed [ 2.100036] db8500-cpufreq-cooling soc:cpufreq-cooling: Cooling device registered: thermal-cpufreq-0 [ 2.113311] db8500-esram12: disabling [ 2.117126] db8500-esram34: disabling [ 2.121063] V-CSI/DSI: disabling [ 2.124328] mmci-reg: disabling [ 2.128021] uart-pl011 80007000.uart: DMA channel TX dma0chan20 [ 2.134002] uart-pl011 80007000.uart: DMA channel RX dma0chan21 [ 2.140350] Waiting for root device /dev/mmcblk0p4... cu: Got hangup signal Connected. cu: waitpid: No child processes Connected.

Disconnected.

[PYBOOT] [snowball 02:09]: Timed out waiting for "<type 'str'>":

[PYBOOT] [snowball 02:10]: got exception: timeout ~$off

[PYBOOT] [snowball 02:11]: Done. Board snowball-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------

[ 1.862304] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.869903] ledtrig-cpu: registered to indicate activity on CPUs [ 1.876159] usbcore: registered new interface driver usbhid [ 1.881713] usbhid: USB HID core driver [ 1.889038] NET: Registered protocol family 10 [ 1.894531] sit: IPv6 over IPv4 tunneling driver [ 1.899719] NET: Registered protocol family 17 [ 1.904205] can: controller area network core (rev 20120528 abi 9) [ 1.910430] NET: Registered protocol family 29 [ 1.914855] can: raw protocol (rev 20120528) [ 1.919158] can: broadcast manager protocol (rev 20120528 t) [ 1.924804] can: netlink gateway (rev 20130117) max_hops=1 [ 1.930755] Key type dns_resolver registered [ 1.935211] ThumbEE CPU extension supported. [ 1.947906] input: gpio_keys as /devices/soc0/gpio_keys/input/input0 [ 1.954620] rtc-pl031 80154000.rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 1.963775] thermal cooling_device0: thermal-cpufreq-0 bind to 0: 0-succeed [ 1.970764] thermal cooling_device0: thermal-cpufreq-0 bind to 1: 0-succeed [ 1.977722] thermal cooling_device0: thermal-cpufreq-0 bind to 2: 0-succeed [ 1.984710] db8500-cpufreq-cooling soc:cpufreq-cooling: Cooling device registered: thermal-cpufreq-0 [ 1.996429] db8500-esram12: disabling [ 2.000213] db8500-esram34: disabling [ 2.004150] V-CSI/DSI: disabling [ 2.007415] mmci-reg: disabling [ 2.011108] uart-pl011 80007000.uart: DMA channel TX dma0chan20 [ 2.017089] uart-pl011 80007000.uart: DMA channel RX dma0chan21 [ 2.024291] Waiting for root device /dev/mmcblk0p4... [ 2.059722] mmc3: new high speed MMC card at address 0001 [ 2.065551] mmcblk3: mmc3:0001 3.53 GiB [ 2.069702] mmcblk3boot0: mmc3:0001 partition 1 2.00 MiB [ 2.075286] mmcblk3boot1: mmc3:0001 partition 2 2.00 MiB [ 2.080810] mmcblk3rpmb: mmc3:0001 partition 3 128 KiB [ 2.087097] mmcblk3: p1 p2 p3 p4

[PYBOOT] [snowball 02:03]: Timed out waiting for "<type 'str'>":

[PYBOOT] [snowball 02:04]: got exception: timeout ~$off

[PYBOOT] [snowball 02:06]: Done. Board snowball-arm-u8500_defconfig failure log: -------------------------------------------------

[ 2.681243] ux500-msp-i2s ux500-msp-i2s.1: Failed to get DMA channel capabilities, falling back to period counting: -6 [ 2.691955] snd-soc-mop500 snd-soc-mop500.0: ab8500-codec-dai.0 <-> ux500-msp-i2s.1 mapping ok [ 2.701873] ux500-msp-i2s ux500-msp-i2s.3: Failed to get DMA channel capabilities, falling back to period counting: -6 [ 2.712615] snd-soc-mop500 snd-soc-mop500.0: ab8500-codec-dai.1 <-> ux500-msp-i2s.3 mapping ok [ 2.736297] NET: Registered protocol family 10 [ 2.741882] sit: IPv6 over IPv4 tunneling driver [ 2.747436] NET: Registered protocol family 17 [ 2.751953] NET: Registered protocol family 35 [ 2.756500] NET: Registered protocol family 37 [ 2.761138] Registering SWP/SWPB emulation handler [ 2.767517] coresight-etm3x 801ae000.ptm: PTM 1.0 initialized [ 2.773834] coresight-etm3x 801af000.ptm: PTM 1.0 initialized [ 2.780426] input: gpio_keys as /devices/soc0/gpio_keys/input/input1 [ 2.787597] ab8500-rtc ab8500-rtc.0: setting system clock to 2000-04-01 16:18:49 UTC (954605929) [ 2.796844] thermal cooling_device0: thermal-cpufreq-0 bind to 0: 0-succeed [ 2.803863] thermal cooling_device0: thermal-cpufreq-0 bind to 1: 0-succeed [ 2.810852] thermal cooling_device0: thermal-cpufreq-0 bind to 2: 0-succeed [ 2.817810] db8500-cpufreq-cooling soc:cpufreq-cooling: Cooling device registered: thermal-cpufreq-0 [ 2.831604] db8500-esram12: disabling [ 2.835357] db8500-esram34: disabling [ 2.839294] V-CSI/DSI: disabling [ 2.842559] mmci-reg: disabling [ 2.845886] ALSA device list: [ 2.848846] #0: MOP500-card [ 2.852264] uart-pl011 80007000.uart: DMA channel TX dma0chan24 [ 2.858215] uart-pl011 80007000.uart: DMA channel RX dma0chan25 [ 2.864410] Waiting for root device /dev/mmcblk0p4... cu: Got hangup signal Connected. cu: waitpid: No child processes Connected.

Disconnected.

[PYBOOT] [snowball 01:53]: Timed out waiting for "<type 'str'>":

[PYBOOT] [snowball 01:54]: got exception: timeout ~$off

[PYBOOT] [snowball 01:55]: Done. Board wandboard-arm-imx_v6_v7_defconfig failure log: -------------------------------------------------

respawning too fast: disabled fo[ 19.930269] mmcblk0: error -110 sending status command, aborting r 5 minutesINIT: cannot execute "/sbin/getty" [ 19.941809] mmcblk0: error -110 sending status command, retrying [ 19.950284] mmcblk0: error -110 sending status command, retrying [ 19.958742] mmcblk0: error -110 sending status command, aborting [ 19.969785] mmcblk0: error -110 sending status command, retrying [ 19.978245] mmcblk0: error -110 sending status command, retrying [ 19.986678] mmcblk0: error -110 sending status command, aborting [ 19.997711] mmcblk0: error -110 sending status command, retrying [ 20.006147] mmcblk0: error -110 sending status command, retrying [ 20.014579] mmcblk0: error -110 sending status command, aborting INIT: cannot execute "/sbin/gett[ 20.025862] mmcblk0: error -110 sending status command, retrying y" [ 20.034608] mmcblk0: error -110 sending status command, retrying [ 20.043084] mmcblk0: error -110 sending status command, aborting [ 20.054146] mmcblk0: error -110 sending status command, retrying [ 20.062596] mmcblk0: error -110 sending status command, retrying [ 20.071053] mmcblk0: error -110 sending status command, aborting INIT: cannot execute "/sbin/getty" INIT: cannot execute "/sbin/getty" INIT: INIT: Id "3" respawning too fast: disabled for 5 minutescannot execute "/sbin/getty"INIT: INIT: cannot execute "/sbin/getty"Id "S1" respawning too fast: disabled for 5 minutes

INIT: cannot execute "/sbin/getty"

INIT: Id "1" respawning too fast: disabled for 5 minutes INIT: Id "6" respawning too fast: disabled for 5 minutes [ 20.251969] mmcblk0: error -110 sending status command, retrying [ 20.260431] mmcblk0: error -110 sending status command, retrying [ 20.268901] mmcblk0: error -110 sending status command, aborting INIT: cannot execute "/sbin/getty" INIT: Id "2" respawning too fast: disabled for 5 minutes INIT: no more processes left in this runlevel [ 52.975490] random: nonblocking pool is initialized

[PYBOOT] [wandboard 02:57]: Timed out waiting for "<type 'str'>":

[PYBOOT] [wandboard 02:58]: got exception: timeout ~$off

[PYBOOT] [wandboard 03:00]: Done.