Failed boards:
cubie2 sunxi_defconfig : FAILED 1:20.68 cubie2 multi_lpae_defconfig : FAILED 0:58.79 cubox dove_defconfig : BUILD FAILED hummingboard imx_v6_v7_defconfig : FAILED 1:06.64 hummingboard multi_v7_defconfig : FAILED 1:01.51 snowball multi_v7_defconfig : FAILED 1:10.21 wandboard imx_v6_v7_defconfig : FAILED 1:02.66 wandboard multi_v7_defconfig : FAILED 1:00.74
Successful boards:
apc vt8500_v6_v7_defconfig : passed 1:20.47 arndale exynos_defconfig : passed 1:06.55 bbb omap2plus_defconfig : passed 1:36.93 bbb multi_v7_defconfig : passed 1:15.85 beaver tegra_defconfig : passed 0:55.94 beaver multi_v7_defconfig : passed 0:58.78 capri bcm_defconfig : passed 0:43.30 capri multi_v7_defconfig : passed 0:44.28 cubie sunxi_defconfig : passed 0:50.80 cubie multi_v7_defconfig : passed 0:51.98 cubie2 multi_v7_defconfig : passed 1:00.90 dalmore tegra_defconfig : passed 1:20.39 dalmore multi_v7_defconfig : passed 1:16.64 dalmore multi_lpae_defconfig : passed 1:15.68 omap5uevm omap2plus_defconfig : warnings 1:00.30 omap5uevm multi_v7_defconfig : warnings 1:47.89 omap5uevm multi_lpae_defconfig : warnings 1:44.19 panda omap2plus_defconfig : warnings 1:12.59 panda multi_v7_defconfig : passed 1:29.08 sama5 sama5_defconfig : passed 1:56.71 seaboard tegra_defconfig : passed 1:06.04 seaboard multi_v7_defconfig : passed 1:07.34 snow exynos_defconfig : passed 1:26.95 snowball u8500_defconfig : passed 2:05.57 trimslice tegra_defconfig : passed 0:59.80 trimslice multi_v7_defconfig : passed 1:01.36
Offline boards:
Board legend is available at http://arm-soc.lixom.net/boards.html
Last entries of failed logs below:
========================================================================
Board cubie2-multi_lpae_defconfig failure log: -------------------------------------------------
sun7i# tftp 0x40008000 next/next-20140324/multi_lpae_defconfig/zImage tftp 0x40008000 next/next-20140324/multi_lpae_defconfig/zImage Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.158 Filename 'next/next-20140324/multi_lpae_defconfig/zImage'. Load address: 0x40008000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ###################################################### 3.9 MiB/s done Bytes transferred = 4595352 (461e98 hex) sun7i# setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 sun7i# tftp 0x41000000 next/next-20140324/multi_lpae_defconfig/dtbs/sun7i-a20-cubieboard2.dtb tftp 0x41000000 next/next-20140324/multi_lpae_defconfig/dtbs/sun7i-a20-cubieboard2.dtb Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.158 Filename 'next/next-20140324/multi_lpae_defconfig/dtbs/sun7i-a20-cubieboard2.dtb'. Load address: 0x41000000 Loading: *## 455.1 KiB/s done Bytes transferred = 18209 (4721 hex) sun7i# printenv bootargs printenv bootargs bootargs=console=ttyS0,115200n8 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/cubie2 ip=dhcp sun7i# bootz 0x40008000 - 0x41000000 bootz 0x40008000 - 0x41000000 Kernel image @ 0x40008000 [ 0x000000 - 0x461e98 ] ## Flattened Device Tree blob at 41000000 Booting using the fdt blob at 0x41000000 Loading Device Tree to 40ff8000, end 40fff720 ... OK
Starting kernel ...
~$off # PYBOOT: Exception: timeout
========================================================================
Board cubie2-sunxi_defconfig failure log: -------------------------------------------------
[ 0.077058] platform usb1-vbus.3: Driver reg-fixed-voltage requests probe deferral [ 0.077077] reg-fixed-voltage usb2-vbus.4: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/usb2_vbus_pin@0, deferring probe [ 0.077090] platform usb2-vbus.4: Driver reg-fixed-voltage requests probe deferral [ 0.078023] Switched to clocksource timer [ 0.081763] Clockevents: could not switch to one-shot mode: dummy_timer is not functional. [ 0.081780] Could not switch to high resolution mode on CPU 0 [ 0.085082] NET: Registered protocol family 2 [ 0.085560] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.085648] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.085769] TCP: Hash tables configured (established 8192 bind 8192) [ 0.085852] TCP: reno registered [ 0.085871] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.085926] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.086130] NET: Registered protocol family 1 [ 0.086524] RPC: Registered named UNIX socket transport module. [ 0.086538] RPC: Registered udp transport module. [ 0.086544] RPC: Registered tcp transport module. [ 0.086550] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.087515] futex hash table entries: 512 (order: 3, 32768 bytes) [ 0.087996] bounce pool size: 64 pages [ 0.095844] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.095866] io scheduler noop registered [ 0.095872] io scheduler deadline registered [ 0.096048] io scheduler cfq registered (default) [ 0.097667] sunxi-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver [ 0.139061] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled [ 0.141460] console [ttyS0] disabled [ 0.161615] 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 33, base_baud = 1500000) is a U6_16550A [ 0.658326] console [ttyS0] enabled [ 0.663015] mousedev: PS/2 mouse device common for all mice [ 0.668870] i2c /dev entries driver [ 0.673737] sunxi-wdt 1c20c90.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0) [ 0.682692] TCP: cubic registered [ 0.686014] NET: Registered protocol family 17 [ 0.690539] Registering SWP/SWPB emulation handler [ 0.696271] ahci-5v: 5000 mV [ 0.699486] usb1-vbus: 5000 mV [ 0.702935] usb2-vbus: 5000 mV ~$off # PYBOOT: Exception: timeout
========================================================================
Board hummingboard-imx_v6_v7_defconfig failure log: -------------------------------------------------
tftp 0x10800000 next/next-20140324/imx_v6_v7_defconfig/zImage Using FEC device TFTP from server 172.16.1.3; our IP address is 172.16.1.160 Filename 'next/next-20140324/imx_v6_v7_defconfig/zImage'. Load address: 0x10800000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ############################### 1.9 MiB/s done Bytes transferred = 5223312 (4fb390 hex) C1 U-Boot > setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 C1 U-Boot > tftp 0x11000000 next/next-20140324/imx_v6_v7_defconfig/dtbs/imx6dl-hummingboard.dtb tftp 0x11000000 next/next-20140324/imx_v6_v7_defconfig/dtbs/imx6dl-hummingboard.dtb Using FEC device TFTP from server 172.16.1.3; our IP address is 172.16.1.160 Filename 'next/next-20140324/imx_v6_v7_defconfig/dtbs/imx6dl-hummingboard.dtb'. Load address: 0x11000000 Loading: *## 746.1 KiB/s done Bytes transferred = 25988 (6584 hex) C1 U-Boot > printenv bootargs printenv bootargs bootargs=console=ttymxc0,115200 root=/dev/mmcblk0p2 rootwait debug earlyprintk C1 U-Boot >bootz 0x10800000 - 0x11000000 bootz 0x10800000 - 0x11000000 Kernel image @ 0x10800000 [ 0x000000 - 0x4fb390 ] ## Flattened Device Tree blob at 11000000 Booting using the fdt blob at 0x11000000 Using Device Tree in place at 11000000, end 11009583
Starting kernel ...
~$off # PYBOOT: Exception: timeout
========================================================================
Board hummingboard-multi_v7_defconfig failure log: -------------------------------------------------
C1 U-Boot > tftp 0x10800000 next/next-20140324/multi_v7_defconfig/zImage tftp 0x10800000 next/next-20140324/multi_v7_defconfig/zImage Using FEC device TFTP from server 172.16.1.3; our IP address is 172.16.1.160 Filename 'next/next-20140324/multi_v7_defconfig/zImage'. Load address: 0x10800000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# #################################################### 2 MiB/s done Bytes transferred = 4569808 (45bad0 hex) C1 U-Boot > setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 C1 U-Boot > tftp 0x11000000 next/next-20140324/multi_v7_defconfig/dtbs/imx6dl-hummingboard.dtb tftp 0x11000000 next/next-20140324/multi_v7_defconfig/dtbs/imx6dl-hummingboard.dtb Using FEC device TFTP from server 172.16.1.3; our IP address is 172.16.1.160 Filename 'next/next-20140324/multi_v7_defconfig/dtbs/imx6dl-hummingboard.dtb'. Load address: 0x11000000 Loading: *## 1 MiB/s done Bytes transferred = 25988 (6584 hex) C1 U-Boot > printenv bootargs printenv bootargs bootargs=console=ttymxc0,115200 root=/dev/mmcblk0p2 rootwait debug earlyprintk C1 U-Boot > bootz 0x10800000 - 0x11000000 bootz 0x10800000 - 0x11000000 Kernel image @ 0x10800000 [ 0x000000 - 0x45bad0 ] ## Flattened Device Tree blob at 11000000 Booting using the fdt blob at 0x11000000 Using Device Tree in place at 11000000, end 11009583
Starting kernel ...
\°X%¥éÙõÐM7è'`H@ØÐÀAÆÀä ÄÜ`HèÒèrÄðlHÀÀÂÝeÈ4\8zÀÚí2€$S²ÈÄmøýfÂŽÃØØE¡ÐlÔúØGžÃÐ.Ú°ðÐØÐØÀÚÈ·ÊÛÊÈÛÀðà`Piš²ÚøXZÐÚÈ>XÈÐÀcXÒÀÒÂà%òÊ%ðÀÚø[%âòÐBÀÉÒT%ÀÀÀÀðûÚä²ÂàÀÚf,,zÀ@ ŒÌmÒÒ³ÀÀØÜÈ~$off # PYBOOT: Exception: timeout
========================================================================
Board snowball-multi_v7_defconfig failure log: -------------------------------------------------
BOOTP broadcast 1 *** Unhandled DHCP Option in OFFER/ACK: 28 *** Unhandled DHCP Option in OFFER/ACK: 28 DHCP client bound to address 172.16.1.126 U8500 $ setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 U8500 $ tftp 0x00100000 tmp/snowball-FYVyRF/tmp4q2oB4-uImage tftp 0x00100000 tmp/snowball-FYVyRF/tmp4q2oB4-uImage smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC 08:00:08:1e:0f:44 Using smc911x-0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.126 Filename 'tmp/snowball-FYVyRF/tmp4q2oB4-uImage'. Load address: 0x100000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ####################################################### done Bytes transferred = 4611121 (465c31 hex) U8500 $printenv bootargs printenv bootargs bootargs=console=ttyAMA2,115200 root=/dev/mmcblk0p4 rootwait rw debug earlyprintk U8500 $ bootm 0x00100000 bootm 0x00100000 ## Booting kernel from Legacy Image at 00100000 ... Image Name: Linux Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 4611057 Bytes = 4.4 MB Load Address: 00008000 Entry Point: 00008000 Loading Kernel Image ... OK OK
Starting kernel ...
~$off # PYBOOT: Exception: timeout
========================================================================
Board wandboard-imx_v6_v7_defconfig failure log: -------------------------------------------------
tftp 0x10800000 next/next-20140324/imx_v6_v7_defconfig/zImage Using FEC device TFTP from server 172.16.1.3; our IP address is 172.16.1.159 Filename 'next/next-20140324/imx_v6_v7_defconfig/zImage'. Load address: 0x10800000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ############################### 5.8 MiB/s done Bytes transferred = 5223312 (4fb390 hex) => setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 => tftp 0x11000000 next/next-20140324/imx_v6_v7_defconfig/dtbs/imx6q-wandboard.dtb tftp 0x11000000 next/next-20140324/imx_v6_v7_defconfig/dtbs/imx6q-wandboard.dtb Using FEC device TFTP from server 172.16.1.3; our IP address is 172.16.1.159 Filename 'next/next-20140324/imx_v6_v7_defconfig/dtbs/imx6q-wandboard.dtb'. Load address: 0x11000000 Loading: *### 1.3 MiB/s done Bytes transferred = 29426 (72f2 hex) => printenv bootargs printenv bootargs bootargs=console=ttymxc0,115200 root=/dev/mmcblk0p2 rootwait debug => bootz 0x10800000 - 0x11000000 bootz 0x10800000 - 0x11000000 Kernel image @ 0x10800000 [ 0x000000 - 0x4fb390 ] ## Flattened Device Tree blob at 11000000 Booting using the fdt blob at 0x11000000 Using Device Tree in place at 11000000, end 1100a2f1
Starting kernel ...
~$off # PYBOOT: Exception: timeout
========================================================================
Board wandboard-multi_v7_defconfig failure log: -------------------------------------------------
tftp 0x10800000 next/next-20140324/multi_v7_defconfig/zImage Using FEC device TFTP from server 172.16.1.3; our IP address is 172.16.1.159 Filename 'next/next-20140324/multi_v7_defconfig/zImage'. Load address: 0x10800000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# #################################################### 6 MiB/s done Bytes transferred = 4569808 (45bad0 hex) => setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 => tftp 0x11000000 next/next-20140324/multi_v7_defconfig/dtbs/imx6q-wandboard.dtb tftp 0x11000000 next/next-20140324/multi_v7_defconfig/dtbs/imx6q-wandboard.dtb Using FEC device TFTP from server 172.16.1.3; our IP address is 172.16.1.159 Filename 'next/next-20140324/multi_v7_defconfig/dtbs/imx6q-wandboard.dtb'. Load address: 0x11000000 Loading: *### 1.1 MiB/s done Bytes transferred = 29426 (72f2 hex) => printenv bootargs printenv bootargs bootargs=console=ttymxc0,115200 root=/dev/mmcblk0p2 rootwait debug => bootz 0x10800000 - 0x11000000 bootz node: wandboard status: on 0x10800000 - 0x11000000 Kernel image @ 0x10800000 [ 0x000000 - 0x45bad0 ] ## Flattened Device Tree blob at 11000000 Booting using the fdt blob at 0x11000000 Using Device Tree in place at 11000000, end 1100a2f1
Starting kernel ...
~$off # PYBOOT: Exception: timeout