Full logs are available at http://arm-soc.lixom.net/bootlogs/mainline/v4.7-rc2-325-g45b00c9/
Failed boards:
arndale multi_v7_nosmp_defconfig : NO BUILD bbb multi_v7_nosmp_defconfig : NO BUILD beagleboard-x15 multi_v7_nosmp_defconfig : NO BUILD beaver arm-tegra_defconfig : FAILED 1:52.61 beaver arm-multi_v7_defconfig : FAILED 2:00.97 beaver multi_v7_nosmp_defconfig : NO BUILD capri multi_v7_nosmp_defconfig : NO BUILD colibri-vf61 multi_v7_nosmp_defconfig : NO BUILD colombus multi_v7_nosmp_defconfig : NO BUILD cosmic multi_v7_nosmp_defconfig : NO BUILD cubie multi_v7_nosmp_defconfig : NO BUILD cubie2 multi_v7_nosmp_defconfig : NO BUILD cubox multi_v7_nosmp_defconfig : NO BUILD dalmore multi_v7_nosmp_defconfig : NO BUILD hummingboard multi_v7_nosmp_defconfig : NO BUILD jetsontk1 multi_v7_nosmp_defconfig : NO BUILD minnowmax minnowmax_defconfig : NO BUILD odroidu3 arm-exynos_defconfig : FAILED 1:50.42 omap5uevm arm-omap2plus_defconfig : FAILED 2:10.43 omap5uevm arm-multi_v7_defconfig : FAILED 2:06.80 omap5uevm arm-multi_lpae_defconfig : FAILED 2:10.03 omap5uevm multi_v7_nosmp_defconfig : NO BUILD pandaes multi_v7_nosmp_defconfig : NO BUILD parallella multi_v7_nosmp_defconfig : NO BUILD pi arm-exynos_defconfig : FAILED 0:29.24 pi arm-multi_v7_defconfig : FAILED 1:50.97 pi arm-multi_lpae_defconfig : FAILED 2:14.28 pi multi_v7_nosmp_defconfig : NO BUILD pit multi_v7_nosmp_defconfig : NO BUILD rk3288evb multi_v7_nosmp_defconfig : NO BUILD seaboard multi_v7_nosmp_defconfig : NO BUILD snow multi_v7_nosmp_defconfig : NO BUILD snowball multi_v7_nosmp_defconfig : NO BUILD socfpga multi_v7_nosmp_defconfig : NO BUILD trimslice multi_v7_nosmp_defconfig : NO BUILD wandboard multi_v7_nosmp_defconfig : NO BUILD
Successful boards:
apc arm-vt8500_v6_v7_defconfig : passed 1:13.74 arndale arm-exynos_defconfig : passed 1:50.40 arndale arm-multi_v7_defconfig : passed 1:25.37 arndale arm-multi_lpae_defconfig : passed 1:24.17 bbb arm-omap2plus_defconfig : passed 1:39.48 bbb arm-multi_v7_defconfig : passed 1:15.60 beagleboard-x15 arm-omap2plus_defconfig : warnings 0:56.25 beagleboard-x15 arm-multi_v7_defconfig : warnings 0:59.29 beagleboard-x15 arm-multi_lpae_defconfig : warnings 0:59.40 capri arm-bcm_defconfig : passed 0:56.39 capri arm-multi_v7_defconfig : passed 0:52.41 chitra powerpc-pasemi_defconfig : passed 2:09.42 chitra powerpc-ppc64_defconfig : passed 2:02.06 colombus arm-sunxi_defconfig : passed 2:31.89 colombus arm-multi_v7_defconfig : passed 2:44.89 colombus arm-multi_lpae_defconfig : passed 2:37.30 cosmic arm-imx_v6_v7_defconfig : passed 3:20.49 cosmic arm-multi_v7_defconfig : passed 2:59.78 cubie arm-sunxi_defconfig : passed 0:51.98 cubie arm-multi_v7_defconfig : passed 0:46.68 cubie2 arm-sunxi_defconfig : passed 0:58.00 cubie2 arm-multi_v7_defconfig : passed 1:00.41 cubie2 arm-multi_lpae_defconfig : passed 1:02.93 cubox arm-multi_v7_defconfig : passed 1:06.30 cubox arm-mvebu_v7_defconfig : passed 1:18.48 dalmore arm-tegra_defconfig : warnings 1:30.12 dalmore arm-multi_v7_defconfig : warnings 1:25.12 dalmore arm-multi_lpae_defconfig : warnings 1:34.57 jetsontk1 arm-tegra_defconfig : warnings 0:52.09 jetsontk1 arm-multi_v7_defconfig : warnings 0:52.65 jetsontk1 arm-multi_lpae_defconfig : warnings 1:02.28 pandaes arm-omap2plus_defconfig : warnings 1:38.38 pandaes arm-multi_v7_defconfig : passed 1:50.03 parallella arm-multi_v7_defconfig : passed 3:04.23 pit arm-exynos_defconfig : passed 2:10.63 pit arm-multi_v7_defconfig : passed 2:18.65 pit arm-multi_lpae_defconfig : passed 2:23.25 seaboard arm-tegra_defconfig : warnings 1:02.55 seaboard arm-multi_v7_defconfig : warnings 1:03.46 seattle arm64-defconfig : passed 2:15.98 snow arm-exynos_defconfig : passed 2:06.58 snow arm-multi_v7_defconfig : passed 2:01.04 snow arm-multi_lpae_defconfig : passed 2:01.30 snowball arm-multi_v7_defconfig : passed 1:23.91 trimslice arm-tegra_defconfig : warnings 2:49.88 trimslice arm-multi_v7_defconfig : warnings 2:36.86 wandboard arm-imx_v6_v7_defconfig : passed 1:20.66 wandboard arm-multi_v7_defconfig : passed 1:15.76
Offline boards:
colibri-vf61 arm-imx_v6_v7_defconfig : OFFLINE 1:20.99 colibri-vf61 arm-multi_v7_defconfig : OFFLINE 1:20.83 hummingboard arm-imx_v6_v7_defconfig : OFFLINE 2:34.70 hummingboard arm-multi_v7_defconfig : OFFLINE 2:12.38 rk3288evb arm-multi_v7_defconfig : OFFLINE 0:51.65 rk3288evb arm-multi_lpae_defconfig : OFFLINE 0:47.43 sama5 arm-sama5_defconfig : OFFLINE 2:21.62 sama5d3-xplained arm-sama5_defconfig : OFFLINE 2:19.23 snowball arm-u8500_defconfig : OFFLINE 1:16.80 socfpga arm-socfpga_defconfig : OFFLINE 2:18.29 socfpga arm-multi_v7_defconfig : OFFLINE 2:13.61
Board legend is available at http://arm-soc.lixom.net/boards.html
Last entries of failed logs below:
========================================================================
Board beaver-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 3.408101] pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt [ 3.415059] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt [ 3.421579] pcie_pme 0000:00:01.0:pcie001: service driver pcie_pme loaded [ 3.428524] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 3.434108] r8169 0000:01:00.0: enabling device (0140 -> 0143) [ 3.441135] r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xf09f2000, 02:04:4b:01:60:99, XID 0c900800 IRQ 375 [ 3.451134] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 3.462327] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.468949] [drm] No driver support for vblank timestamp query. [ 3.474890] drm drm: No connectors reported connected with modes [ 3.480902] [drm] Cannot find any crtc or sizes - going 1024x768 [ 3.506258] Console: switching to colour frame buffer device 128x48 [ 3.518435] drm drm: fb0: frame buffer device [ 3.533386] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.544205] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 3.550671] tegra-ehci 7d004000.usb: EHCI Host Controller [ 3.556080] tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1 [ 3.563919] tegra-ehci 7d004000.usb: irq 343, io mem 0x7d004000 [ 3.578398] tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.00 [ 3.585147] hub 1-0:1.0: USB hub found [ 3.588919] hub 1-0:1.0: 1 port detected [ 3.593835] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.599252] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 3.606993] tegra-ehci 7d008000.usb: irq 344, io mem 0x7d008000 [ 3.618392] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.00 [ 3.625057] hub 2-0:1.0: USB hub found [ 3.628824] hub 2-0:1.0: 1 port detected [ 3.637682] tps65910-rtc tps65910-rtc: setting system clock to 2000-01-01 00:00:02 UTC (946684802) [ 3.651364] vdd_sata,avdd_plle: disabling [ 3.656081] usb1_vbus: disabling [ 3.660180] Waiting for root device /dev/mmcblk0p1... [ 3.938398] usb 2-1: new high-speed USB device number 2 using tegra-ehci [ 4.876985] asix 2-1:1.0 eth1: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 58:6d:8f:50:ba:18
[PYBOOT] [beaver 01:57]: Timed out waiting for "<type 'str'>":
[PYBOOT] [beaver 01:58]: got exception: timeout ~$off
[PYBOOT] [beaver 01:59]: Done.
========================================================================
Board beaver-arm-tegra_defconfig failure log: -------------------------------------------------
[ 6.454208] pcie_pme 0000:00:01.0:pcie001: service driver pcie_pme loaded [ 6.461249] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 6.466850] r8169 0000:01:00.0: enabling device (0140 -> 0143) [ 6.474369] r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xf087e000, 02:04:4b:01:60:99, XID 0c900800 IRQ 375 [ 6.484369] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 6.497285] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 6.503926] [drm] No driver support for vblank timestamp query. [ 6.509932] drm drm: No connectors reported connected with modes [ 6.515958] [drm] Cannot find any crtc or sizes - going 1024x768 [ 6.542989] Console: switching to colour frame buffer device 128x48 [ 6.554794] drm drm: fb0: frame buffer device [ 6.581087] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 6.590371] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 6.596844] tegra-ehci 7d004000.usb: EHCI Host Controller [ 6.602275] tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1 [ 6.610250] tegra-ehci 7d004000.usb: irq 343, io mem 0x7d004000 [ 6.631084] tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.00 [ 6.638986] hub 1-0:1.0: USB hub found [ 6.642782] hub 1-0:1.0: 1 port detected [ 6.647585] tegra-ehci 7d008000.usb: EHCI Host Controller [ 6.653027] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 6.660918] tegra-ehci 7d008000.usb: irq 344, io mem 0x7d008000 [ 6.681076] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.00 [ 6.688862] hub 2-0:1.0: USB hub found [ 6.692650] hub 2-0:1.0: 1 port detected [ 6.701031] tps65910-rtc tps65910-rtc: setting system clock to 2000-01-01 00:00:02 UTC (946684802) [ 6.719200] vdd_sata,avdd_plle: disabling [ 6.723998] usb1_vbus: disabling [ 6.727408] ALSA device list: [ 6.730365] #0: NVIDIA Tegra Beaver [ 6.734622] Waiting for root device /dev/mmcblk0p1... [ 7.011082] usb 2-1: new high-speed USB device number 2 using tegra-ehci [ 8.011332] asix 2-1:1.0 eth1: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 58:6d:8f:50:ba:18
[PYBOOT] [beaver 01:49]: Timed out waiting for "<type 'str'>":
[PYBOOT] [beaver 01:50]: got exception: timeout ~$off
[PYBOOT] [beaver 01:52]: Done.
========================================================================
Board odroidu3-arm-exynos_defconfig failure log: -------------------------------------------------
[ 1.799336] Key type dns_resolver registered [ 1.803663] Registering SWP/SWPB emulation handler [ 1.811508] [drm] Exynos DRM: using 12c10000.mixer device for DMA mapping operations [ 1.816219] exynos-drm exynos-drm: bound 12c10000.mixer (ops mixer_component_ops) [ 1.823638] exynos-drm exynos-drm: bound 12d00000.hdmi (ops hdmi_component_ops) [ 1.830793] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.837379] [drm] No driver support for vblank timestamp query. [ 1.843332] [drm] Initialized exynos 1.0.0 20110530 on minor 0 [ 1.849710] s3c-rtc 10070000.rtc: rtc disabled, re-enabling [ 1.854844] s3c-rtc 10070000.rtc: rtc core: registered s3c as rtc1 [ 1.862009] mmc_host mmc1: Bus speed (slot 0) = 44000000Hz (slot req 52000000Hz, actual 44000000HZ div = 0) [ 1.870803] mmc_host mmc1: Bus speed (slot 0) = 73333333Hz (slot req 52000000Hz, actual 36666666HZ div = 1) [ 1.880533] mmc1: new DDR MMC card at address 0001 [ 1.880593] usb 1-3: New USB device found, idVendor=0424, idProduct=3503 [ 1.880600] usb 1-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.891925] hub 1-3:1.0: USB hub found [ 1.898796] hub 1-3:1.0: 3 ports detected [ 1.902525] max98090 1-0010: MAX98090 REVID=0x43 [ 1.912040] mmcblk1: mmc1:0001 008G92 7.28 GiB [ 1.915806] mmcblk1boot0: mmc1:0001 008G92 partition 1 4.00 MiB [ 1.921733] mmcblk1boot1: mmc1:0001 008G92 partition 2 4.00 MiB [ 1.927667] mmcblk1rpmb: mmc1:0001 008G92 partition 3 512 KiB [ 1.933386] max98090 1-0010: use default 2.8v micbias [ 1.939185] mmcblk1: p1 p2 [ 1.945853] asoc-simple-card sound: HiFi <-> 3830000.i2s mapping ok [ 1.950895] input: gpio_keys as /devices/platform/gpio_keys/input/input0 [ 1.987186] max77686-rtc max77686-rtc: setting system clock to 2000-01-01 01:00:20 UTC (946688420) [ 2.003860] VDD10_HDMI_1.0V: disabling [ 2.004542] vdd_g3d: disabling [ 2.005607] BUCK8_2.8V: disabling [ 2.009560] ALSA device list: [ 2.011244] #0: Odroid-U3 [ 2.014931] Waiting for root device /dev/mmcblk0p2...
[PYBOOT] [odroidu3 01:47]: Timed out waiting for "<type 'str'>":
[PYBOOT] [odroidu3 01:48]: got exception: timeout ~$off
[PYBOOT] [odroidu3 01:49]: Done.
========================================================================
Board omap5uevm-arm-multi_lpae_defconfig failure log: -------------------------------------------------
[ 1.978136] ldo1: Bringing 0uV into 1800000-1800000uV [ 1.984665] ldo2: Bringing 0uV into 2800000-2800000uV [ 1.992685] ldo4: Bringing 0uV into 1800000-1800000uV [ 2.003775] ldo7: Bringing 0uV into 2000000-2000000uV [ 2.011905] ldo9: bypassed regulator has no supply! [ 2.017029] ldo9: failed to get the current voltage(-517) [ 2.022692] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 2.036913] smsc95xx v1.0.4 [ 2.040984] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 2.064267] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 2.070674] omap-dwc3 4a020000.omap_dwc3: vbus init failed [ 2.097946] smps9: Bringing 0uV into 2100000-2100000uV [ 2.103673] smsc95xx 1-3:1.0 eth0: register 'smsc95xx' at usb-4a064c00.ehci-3, smsc95xx USB 2.0 Ethernet, 6a:5e:89:24:00:17 [ 2.128743] ldo9: bypassed regulator has no supply! [ 2.133866] ldo9: failed to get the current voltage(-517) [ 2.139537] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 2.153719] omap-dwc3 4a020000.omap_dwc3: vbus init failed [ 2.182373] smps9: Bringing 0uV into 2100000-2100000uV [ 2.201180] ldo9: bypassed regulator has no supply! [ 2.206308] ldo9: failed to get the current voltage(-517) [ 2.211972] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 2.226467] palmas-rtc 48070000.i2c:palmas@48:rtc: setting system clock to 2000-01-01 00:50:03 UTC (946687803) [ 2.242390] pbias_mmc_omap5: disabling [ 2.246348] vmmcsdio_fixed: disabling [ 2.250880] Waiting for root device /dev/mmcblk1p2... [ 2.363513] usb 1-2: new high-speed USB device number 3 using ehci-omap [ 2.499339] hub 1-2:1.0: USB hub found [ 2.503351] hub 1-2:1.0: 3 ports detected [ 2.509302] omap-dwc3 4a020000.omap_dwc3: vbus init failed [ 2.537312] smps9: Bringing 0uV into 2100000-2100000uV [ 2.556196] ldo9: bypassed regulator has no supply! [ 2.561314] ldo9: failed to get the current voltage(-517) [ 2.566983] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator
[PYBOOT] [omap5uevm 02:07]: Timed out waiting for "<type 'str'>":
[PYBOOT] [omap5uevm 02:08]: got exception: timeout ~$off
[PYBOOT] [omap5uevm 02:09]: Done.
========================================================================
Board omap5uevm-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.938199] mmc0: new high speed MMC card at address 0001 [ 1.948890] mmcblk0: mmc0:0001 SEM04G 3.69 GiB [ 1.953791] mmcblk0boot0: mmc0:0001 SEM04G partition 1 2.00 MiB [ 1.960135] mmcblk0boot1: mmc0:0001 SEM04G partition 2 2.00 MiB [ 1.970287] smps9: Bringing 0uV into 2100000-2100000uV [ 1.978452] ldo1: Bringing 0uV into 1800000-1800000uV [ 1.985000] ldo2: Bringing 0uV into 2800000-2800000uV [ 1.993012] ldo4: Bringing 0uV into 1800000-1800000uV [ 2.004069] ldo7: Bringing 0uV into 2000000-2000000uV [ 2.011805] smsc95xx v1.0.4 [ 2.015127] ldo9: bypassed regulator has no supply! [ 2.020251] ldo9: failed to get the current voltage(-517) [ 2.025918] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 2.041227] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 2.064260] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 2.068085] smsc95xx 1-3:1.0 eth0: register 'smsc95xx' at usb-4a064c00.ehci-3, smsc95xx USB 2.0 Ethernet, 7e:61:da:d8:6b:4d [ 2.082353] omap-dwc3 4a020000.omap_dwc3: vbus init failed [ 2.112211] smps9: Bringing 0uV into 2100000-2100000uV [ 2.130914] ldo9: bypassed regulator has no supply! [ 2.136032] ldo9: failed to get the current voltage(-517) [ 2.141703] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 2.156201] palmas-rtc 48070000.i2c:palmas@48:rtc: setting system clock to 2000-01-01 00:47:38 UTC (946687658) [ 2.172112] pbias_mmc_omap5: disabling [ 2.176056] vmmcsdio_fixed: disabling [ 2.180619] Waiting for root device /dev/mmcblk1p2... [ 2.293489] usb 1-2: new high-speed USB device number 3 using ehci-omap [ 2.429385] hub 1-2:1.0: USB hub found [ 2.433391] hub 1-2:1.0: 3 ports detected [ 2.439265] omap-dwc3 4a020000.omap_dwc3: vbus init failed [ 2.467185] smps9: Bringing 0uV into 2100000-2100000uV [ 2.485880] ldo9: bypassed regulator has no supply! [ 2.490999] ldo9: failed to get the current voltage(-517) [ 2.496661] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator
[PYBOOT] [omap5uevm 02:02]: Timed out waiting for "<type 'str'>":
[PYBOOT] [omap5uevm 02:03]: got exception: timeout ~$off
[PYBOOT] [omap5uevm 02:05]: Done.
========================================================================
Board omap5uevm-arm-omap2plus_defconfig failure log: -------------------------------------------------
[ 3.897224] ldo9: bypassed regulator has no supply! [ 3.902353] ldo9: failed to get the current voltage(-517) [ 3.908023] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 3.930950] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 3.938455] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 3.945022] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer cd [ 3.951331] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 3.958179] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/ocp/mmc@4809c000[0]' [ 3.967762] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/ocp/mmc@4809c000[0]' [ 3.977253] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 3.984311] omap_hsmmc 4809c000.mmc: lookup for GPIO cd failed [ 3.990444] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer wp [ 3.996737] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 4.003593] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@4809c000[0]' [ 4.013185] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@4809c000[0]' [ 4.022686] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 4.029724] omap_hsmmc 4809c000.mmc: lookup for GPIO wp failed [ 4.069906] omap_hsmmc 480ad000.mmc: GPIO lookup for consumer wp [ 4.076202] omap_hsmmc 480ad000.mmc: using device tree for GPIO lookup [ 4.083070] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@480ad000[0]' [ 4.092649] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@480ad000[0]' [ 4.102147] omap_hsmmc 480ad000.mmc: using lookup tables for GPIO lookup [ 4.109184] omap_hsmmc 480ad000.mmc: lookup for GPIO wp failed [ 4.129816] smps9: Bringing 0uV into 2100000-2100000uV [ 4.158302] ldo9: bypassed regulator has no supply! [ 4.163428] ldo9: failed to get the current voltage(-517) [ 4.169106] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 4.189234] hctosys: unable to open rtc device (rtc0) [ 4.194529] sr_init: No PMIC hook to init smartreflex [ 4.200030] sr_init: platform driver register failed for SR [ 4.227468] pbias_mmc_omap5: disabling [ 4.231436] vmmcsdio_fixed: disabling [ 4.237541] Waiting for root device /dev/mmcblk1p2...
[PYBOOT] [omap5uevm 02:06]: Timed out waiting for "<type 'str'>":
[PYBOOT] [omap5uevm 02:07]: got exception: timeout ~$off
[PYBOOT] [omap5uevm 02:09]: Done.
========================================================================
Board pi-arm-exynos_defconfig failure log: -------------------------------------------------
[ 3.167089] exynos-drm exynos-drm: fb0: frame buffer device [ 3.185125] [drm] Initialized exynos 1.0.0 20110530 on minor 0 [ 3.190175] input: gpio-keys as /devices/platform/gpio-keys/input/input2 [ 3.197634] max77686-rtc max77802-rtc: hctosys: unable to read the hardware clock [ 3.219838] vdd_1v2_2: disabling [ 3.221776] TPS65090_RAILSDCDC3: disabling [ 3.225698] TPS65090_RAILSLDO1: disabling [ 3.229660] TPS65090_RAILSLDO2: disabling [ 3.234184] ALSA device list: [ 3.236618] #0: Peach-Pi-I2S-MAX98091 [ 3.241807] EXT4-fs (mmcblk0p1): couldn't mount as ext3 due to feature incompatibilities [ 3.257239] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 3.263926] VFS: Mounted root (ext4 filesystem) readonly on device 179:1. [ 3.273056] devtmpfs: mounted [ 3.275121] Freeing unused kernel memory: 1024K (c0a00000 - c0b00000)
[PYBOOT] [pi 00:26]: kernel: finished booting, starting userspace. [ 3.285142] Unhandled fault: imprecise external abort (0x1406) at 0x00000000 [ 3.290704] pgd = edbbc000 [ 3.293394] [00000000] *pgd=fb82c835 [ 3.305179] Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000007 [ 3.305179] [ 3.312828] CPU: 0 PID: 1 Comm: init Not tainted 4.7.0-rc2-00325-g45b00c9 #1 [ 3.319852] Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) [ 3.325945] [<c010dfec>] (unwind_backtrace) from [<c010ad18>] (show_stack+0x10/0x14) [ 3.333651] [<c010ad18>] (show_stack) from [<c03269f8>] (dump_stack+0x78/0x8c) [ 3.340853] [<c03269f8>] (dump_stack) from [<c0196820>] (panic+0xd8/0x250) [ 3.347706] [<c0196820>] (panic) from [<c011e6a0>] (do_exit+0xa10/0xa34) [ 3.354383] [<c011e6a0>] (do_exit) from [<c011f27c>] (do_group_exit+0x3c/0xbc) [ 3.361585] [<c011f27c>] (do_group_exit) from [<c012875c>] (get_signal+0x220/0x5a4) [ 3.369217] [<c012875c>] (get_signal) from [<c010a460>] (do_signal+0xc4/0x418) [ 3.376418] [<c010a460>] (do_signal) from [<c010a958>] (do_work_pending+0x94/0xa4) [ 3.383965] [<c010a958>] (do_work_pending) from [<c0107714>] (slow_work_pending+0xc/0x20) [ 3.392130] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000007 [ 3.392130]
[PYBOOT] [pi 00:27]: got exception: panic ~$off
[PYBOOT] [pi 00:28]: Done.
========================================================================
Board pi-arm-multi_lpae_defconfig failure log: -------------------------------------------------
[ 1.533381] isl29018 7-0044: No cache defaults, reading back from HW [ 1.539733] isl29018 7-0044: Failed to read 1: -6 [ 1.544319] isl29018 7-0044: regmap initialization fails: -6 [ 1.555206] NET: Registered protocol family 10 [ 1.559632] sit: IPv6 over IPv4 tunneling driver [ 1.563214] NET: Registered protocol family 17 [ 1.567218] can: controller area network core (rev 20120528 abi 9) [ 1.573408] NET: Registered protocol family 29 [ 1.577795] can: raw protocol (rev 20120528) [ 1.582045] can: broadcast manager protocol (rev 20120528 t) [ 1.587687] can: netlink gateway (rev 20130117) max_hops=1 [ 1.593412] Key type dns_resolver registered [ 1.597736] ThumbEE CPU extension supported. [ 1.601655] Registering SWP/SWPB emulation handler [ 1.611554] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.617033] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.623401] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.628775] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 1.638873] input: gpio-keys as /devices/platform/gpio-keys/input/input1 [ 1.649227] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.654676] mmc_host mmc0: Bus speed (slot 0) = 200000000Hz (slot req 200000000Hz, actual 200000000HZ div = 0) [ 1.664860] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.671042] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.676420] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 1.686155] max77686-rtc max77802-rtc: hctosys: unable to read the hardware clock [ 1.708710] Waiting for root device /dev/mmcblk0p1... [ 1.712585] mmc0: tuning execution failed: -5 [ 1.716643] mmc0: error -5 whilst initialising MMC card [ 2.583172] asix 1-1:1.0 eth0: register 'asix' at usb-xhci-hcd.2.auto-1, ASIX AX88772 USB 2.0 Ethernet, c8:b3:73:46:fb:95 [ 2.597303] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 2.602767] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 2.609136] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 2.614519] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo
[PYBOOT] [pi 02:09]: Timed out waiting for "<type 'str'>":
[PYBOOT] [pi 02:10]: got exception: timeout ~$off
[PYBOOT] [pi 02:11]: Done.
========================================================================
Board pi-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.533293] isl29018 7-0044: No cache defaults, reading back from HW [ 1.539647] isl29018 7-0044: Failed to read 1: -6 [ 1.544231] isl29018 7-0044: regmap initialization fails: -6 [ 1.555125] NET: Registered protocol family 10 [ 1.559559] sit: IPv6 over IPv4 tunneling driver [ 1.563131] NET: Registered protocol family 17 [ 1.567138] can: controller area network core (rev 20120528 abi 9) [ 1.573329] NET: Registered protocol family 29 [ 1.577716] can: raw protocol (rev 20120528) [ 1.581965] can: broadcast manager protocol (rev 20120528 t) [ 1.587607] can: netlink gateway (rev 20130117) max_hops=1 [ 1.593335] Key type dns_resolver registered [ 1.597653] ThumbEE CPU extension supported. [ 1.601576] Registering SWP/SWPB emulation handler [ 1.611491] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.616972] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.623338] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.628714] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 1.638816] input: gpio-keys as /devices/platform/gpio-keys/input/input1 [ 1.649156] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.654605] mmc_host mmc0: Bus speed (slot 0) = 200000000Hz (slot req 200000000Hz, actual 200000000HZ div = 0) [ 1.664791] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.670971] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.676350] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 1.686124] max77686-rtc max77802-rtc: hctosys: unable to read the hardware clock [ 1.708661] Waiting for root device /dev/mmcblk0p1... [ 1.712509] mmc0: tuning execution failed: -5 [ 1.716597] mmc0: error -5 whilst initialising MMC card [ 2.583084] asix 1-1:1.0 eth0: register 'asix' at usb-xhci-hcd.2.auto-1, ASIX AX88772 USB 2.0 Ethernet, c8:b3:73:46:fb:95 [ 2.597245] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 2.602702] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 2.609074] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 2.614457] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo
[PYBOOT] [pi 01:47]: Timed out waiting for "<type 'str'>":
[PYBOOT] [pi 01:48]: got exception: timeout ~$off
[PYBOOT] [pi 01:49]: Done.