Failed boards:
panda multi_v7_defconfig : FAILED 3:08.01 snowball multi_v7_defconfig : FAILED 1:10.02
Successful boards:
apc vt8500_v6_v7_defconfig : passed 1:12.73 arndale exynos_defconfig : passed 1:03.33 bbb omap2plus_defconfig : passed 1:32.81 bbb multi_v7_defconfig : passed 1:22.50 beaver tegra_defconfig : passed 0:53.09 beaver multi_v7_defconfig : passed 0:52.90 capri bcm_defconfig : passed 0:45.86 capri multi_v7_defconfig : passed 0:44.90 cubie sunxi_defconfig : passed 1:08.43 cubie multi_v7_defconfig : passed 1:09.62 cubie2 sunxi_defconfig : passed 0:51.43 cubie2 multi_v7_defconfig : passed 1:07.27 cubie2 multi_lpae_defconfig : passed 0:55.02 dalmore tegra_defconfig : passed 1:26.78 dalmore multi_v7_defconfig : passed 1:16.59 dalmore multi_lpae_defconfig : passed 1:21.77 hummingboard imx_v6_v7_defconfig : passed 1:22.13 hummingboard multi_v7_defconfig : passed 1:13.88 omap5uevm omap2plus_defconfig : passed 1:11.32 omap5uevm multi_v7_defconfig : passed 1:42.12 omap5uevm multi_lpae_defconfig : passed 1:40.14 panda omap2plus_defconfig : warnings 1:17.01 sama5 sama5_defconfig : passed 1:51.86 seaboard tegra_defconfig : passed 1:03.96 seaboard multi_v7_defconfig : passed 1:12.65 snow exynos_defconfig : passed 1:31.84 snowball u8500_defconfig : passed 1:55.26 trimslice tegra_defconfig : passed 0:57.24 trimslice multi_v7_defconfig : passed 1:04.03 wandboard imx_v6_v7_defconfig : passed 1:01.95 wandboard multi_v7_defconfig : passed 1:06.35
Offline boards:
Board legend is available at http://arm-soc.lixom.net/boards.html
Last entries of failed logs below:
========================================================================
Board panda-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.767089] VMMC: 1200 <--> 3000 mV at 3000 mV [ 1.772644] VPP: 1800 <--> 2500 mV at 1900 mV [ 1.778076] VUSIM: 1200 <--> 2900 mV at 1800 mV [ 1.783050] VDAC: 1800 mV [ 1.786834] VANA: 2100 mV [ 1.790374] VCXIO: 1800 mV [ 1.793395] VUSB: 3300 mV [ 1.797332] V1V8: 1800 mV [ 1.800933] V2V1: 2100 mV [ 1.879425] usb 1-1: new high-speed USB device number 2 using ehci-omap [ 2.029876] hub 1-1:1.0: USB hub found [ 2.034179] hub 1-1:1.0: 5 ports detected [ 2.038482] omap_i2c 48070000.i2c: bus 0 rev0.11 at 400 kHz [ 2.046112] omap_i2c 48072000.i2c: bus 1 rev0.11 at 400 kHz [ 2.055053] omap_i2c 48060000.i2c: bus 2 rev0.11 at 100 kHz [ 2.062530] omap_i2c 48350000.i2c: bus 3 rev0.11 at 400 kHz [ 2.070373] omap_hsmmc 4809c000.mmc: pins are not configured from the driver [ 2.252929] twl_rtc rtc.15: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 2.266967] ALSA device list: [ 2.269775] No soundcards found. [ 2.273712] Waiting for root device /dev/mmcblk0p2... [ 2.299560] mmc0: host does not support reading read-only switch. assuming write-enable. [ 2.310058] mmc0: new high speed SDHC card at address b368 [ 2.316192] mmcblk0: mmc0:b368 00000 7.51 GiB [ 2.322540] mmcblk0: p1 p2 [ 2.330383] usb 1-1.1: new high-speed USB device number 3 using ehci-omap [ 2.337585] omap_hsmmc 480d5000.mmc: card claims to support voltages below defined range [ 2.355804] mmc1: queuing unknown CIS tuple 0x91 (3 bytes) [ 2.362426] mmc1: new SDIO card at address 0001 [ 2.384704] EXT4-fs (mmcblk0p2): couldn't mount as ext3 due to feature incompatibilities [ 2.394134] EXT4-fs (mmcblk0p2): couldn't mount as ext2 due to feature incompatibilities [ 2.418518] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) [ 2.427093] VFS: Mounted root (ext4 filesystem) readonly on device 179:2. [ 2.444274] devtmpfs: mounted [ 2.444305] Freeing unused kernel memory: 556K (c0a70000 - c0afb000) [ 2.462036] smsc95xx v1.0.4 [ 2.524047] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-4a064c00.ehci-1.1, smsc95xx USB 2.0 Ethernet, 6a:3a:2d:aa:a8:ad INIT: version 2.88 booting ~$off # PYBOOT: Exception: timeout
========================================================================
Board snowball-multi_v7_defconfig failure log: -------------------------------------------------
BOOTP broadcast 1 *** Unhandled DHCP Option in OFFER/ACK: 28 *** Unhandled DHCP Option in OFFER/ACK: 28 DHCP client bound to address 172.16.1.112 U8500 $ setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 U8500 $ tftp 0x01000000 tmp/snowball-IFSikf/tmplCqD8k-uImage tftp 0x01000000 tmp/snowball-IFSikf/tmplCqD8k-uImage smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC 08:00:08:1e:0f:44 Using smc911x-0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.112 Filename 'tmp/snowball-IFSikf/tmplCqD8k-uImage'. Load address: 0x1000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ############################################################ done Bytes transferred = 4693609 (479e69 hex) U8500 $ printenv bootargs printenv bootargs bootargs=console=ttyAMA2,115200 root=/dev/mmcblk0p4 rootwait rw debug earlyprintk U8500 $ bootm 0x01000000 bootm 0x01000000 ## Booting kernel from Legacy Image at 01000000 ... Image Name: Linux Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 4693545 Bytes = 4.5 MB Load Address: 00008000 Entry Point: 00008000 Loading Kernel Image ... OK OK
Starting kernel ...
~$off # PYBOOT: Exception: timeout