Full logs are available at http://arm-soc.lixom.net/bootlogs/arm-soc/v4.6-rc5-6691-g22a4aa3/
Failed boards:
arndale arm-multi_v7_nosmp_defconfig : FAILED 1:10.16 bbb arm-omap2plus_defconfig : FAILED 1:54.55 bbb arm-multi_v7_defconfig : FAILED 2:01.19 bbb arm-multi_v7_nosmp_defconfig : FAILED 2:02.99 beagleboard-x15 arm-omap2plus_defconfig : FAILED 1:48.26 beagleboard-x15 arm-multi_v7_defconfig : FAILED 1:49.00 beagleboard-x15 arm-multi_lpae_defconfig : FAILED 2:04.15 beagleboard-x15 arm-multi_v7_nosmp_defconfig : FAILED 1:51.45 beaver arm-tegra_defconfig : FAILED 1:48.68 beaver arm-multi_v7_defconfig : FAILED 1:50.04 beaver arm-multi_v7_nosmp_defconfig : FAILED 1:52.07 colombus arm-multi_v7_nosmp_defconfig : FAILED 3:19.40 cosmic arm-imx_v6_v7_defconfig : FAILED 2:01.70 cosmic arm-multi_v7_defconfig : FAILED 2:05.06 cosmic arm-multi_v7_nosmp_defconfig : FAILED 2:23.39 dalmore arm-tegra_defconfig : FAILED 1:54.92 dalmore arm-multi_v7_defconfig : FAILED 1:56.01 dalmore arm-multi_lpae_defconfig : FAILED 2:06.02 dalmore arm-multi_v7_nosmp_defconfig : FAILED 1:54.52 minnowmax minnowmax_defconfig : NO BUILD odroidu3 arm-exynos_defconfig : FAILED 1:59.44 omap5uevm arm-omap2plus_defconfig : FAILED 2:05.66 omap5uevm arm-multi_v7_defconfig : FAILED 2:11.13 omap5uevm arm-multi_lpae_defconfig : FAILED 2:12.93 omap5uevm arm-multi_v7_nosmp_defconfig : FAILED 2:05.13 seaboard arm-tegra_defconfig : FAILED 1:54.77 seaboard arm-multi_v7_defconfig : FAILED 2:04.64 seaboard arm-multi_v7_nosmp_defconfig : FAILED 1:50.41 snow arm-multi_v7_nosmp_defconfig : FAILED 1:48.58 snowball arm-u8500_defconfig : FAILED 1:55.93 snowball arm-multi_v7_defconfig : FAILED 2:18.35 snowball arm-multi_v7_nosmp_defconfig : FAILED 2:01.25
Successful boards:
apc arm-vt8500_v6_v7_defconfig : passed 1:12.61 arndale arm-exynos_defconfig : passed 1:33.96 arndale arm-multi_v7_defconfig : passed 1:27.64 arndale arm-multi_lpae_defconfig : passed 1:23.71 capri arm-bcm_defconfig : passed 0:50.97 capri arm-multi_v7_defconfig : passed 1:03.50 capri arm-multi_v7_nosmp_defconfig : warnings 0:56.41 chitra powerpc-pasemi_defconfig : passed 2:00.46 chitra powerpc-ppc64_defconfig : passed 2:02.60 colombus arm-sunxi_defconfig : passed 2:27.24 colombus arm-multi_v7_defconfig : passed 2:43.02 colombus arm-multi_lpae_defconfig : passed 2:27.03 cubie arm-sunxi_defconfig : passed 0:54.73 cubie arm-multi_v7_defconfig : passed 0:49.90 cubie arm-multi_v7_nosmp_defconfig : passed 0:57.83 cubie2 arm-sunxi_defconfig : passed 0:50.51 cubie2 arm-multi_v7_defconfig : passed 0:54.01 cubie2 arm-multi_lpae_defconfig : passed 1:00.61 cubie2 arm-multi_v7_nosmp_defconfig : warnings 1:10.78 cubox arm-multi_v7_defconfig : passed 1:02.95 cubox arm-mvebu_v7_defconfig : passed 1:19.04 cubox arm-multi_v7_nosmp_defconfig : passed 1:23.90 hummingboard arm-imx_v6_v7_defconfig : passed 1:36.07 hummingboard arm-multi_v7_defconfig : passed 1:41.47 hummingboard arm-multi_v7_nosmp_defconfig : warnings 1:16.19 jetsontk1 arm-tegra_defconfig : warnings 0:51.01 jetsontk1 arm-multi_v7_defconfig : warnings 1:39.89 jetsontk1 arm-multi_lpae_defconfig : warnings 1:39.71 jetsontk1 arm-multi_v7_nosmp_defconfig : warnings 1:30.16 pandaes arm-omap2plus_defconfig : warnings 1:37.00 pandaes arm-multi_v7_defconfig : passed 1:46.61 pandaes arm-multi_v7_nosmp_defconfig : warnings 1:57.49 pi arm-exynos_defconfig : passed 2:14.22 pi arm-multi_v7_defconfig : passed 2:18.21 pi arm-multi_lpae_defconfig : passed 2:31.11 pit arm-exynos_defconfig : passed 2:13.55 pit arm-multi_v7_defconfig : passed 2:13.78 pit arm-multi_lpae_defconfig : passed 2:24.76 pit arm-multi_v7_nosmp_defconfig : warnings 2:09.39 seattle arm64-defconfig : passed 2:19.60 snow arm-exynos_defconfig : passed 2:09.00 snow arm-multi_v7_defconfig : passed 2:13.70 snow arm-multi_lpae_defconfig : passed 2:30.34 trimslice arm-tegra_defconfig : warnings 1:34.41 trimslice arm-multi_v7_defconfig : warnings 3:10.01 trimslice arm-multi_v7_nosmp_defconfig : warnings 1:34.00 wandboard arm-imx_v6_v7_defconfig : passed 1:22.95 wandboard arm-multi_v7_defconfig : passed 1:16.82 wandboard arm-multi_v7_nosmp_defconfig : warnings 1:10.60
Offline boards:
colibri-vf61 arm-imx_v6_v7_defconfig : OFFLINE 1:15.53 colibri-vf61 arm-multi_v7_defconfig : OFFLINE 1:18.45 colibri-vf61 arm-multi_v7_nosmp_defconfig : OFFLINE 1:28.27 parallella arm-multi_v7_defconfig : OFFLINE 2:37.32 parallella arm-multi_v7_nosmp_defconfig : OFFLINE 2:16.59 pi arm-multi_v7_nosmp_defconfig : OFFLINE 1:53.75 rk3288evb arm-multi_v7_defconfig : OFFLINE 0:54.08 rk3288evb arm-multi_lpae_defconfig : OFFLINE 0:54.50 rk3288evb arm-multi_v7_nosmp_defconfig : OFFLINE 0:44.14 sama5 arm-sama5_defconfig : OFFLINE 2:18.40 sama5d3-xplained arm-sama5_defconfig : OFFLINE 2:26.96 socfpga arm-socfpga_defconfig : OFFLINE 2:30.36 socfpga arm-multi_v7_defconfig : OFFLINE 2:38.21 socfpga arm-multi_v7_nosmp_defconfig : OFFLINE 2:14.89
Board legend is available at http://arm-soc.lixom.net/boards.html
Board arndale-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
hctosys: unable to open rtc device (rtc0) MAIN_DC: disabling hdmi-en: disabling ahci 122f0000.sata: couldn't get PHY in node sata: -517 Unable to handle kernel paging request at virtual address c103aed8 pgd = c0204000 [c103aed8] *pgd=4100041e(bad) Internal error: Oops: 8000000d [#1] ARM Modules linked in: CPU: 0 PID: 0 Comm: swapper Tainted: G W 4.6.0-rc5-next-20160426-00187-g22a4aa3 #1 Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) task: c1005f30 ti: c1000000 task.ti: c1000000 PC is at 0xc103aed8 LR is at cpu_init+0x14/0x54 pc : [<c103aed8>] lr : [<c0309fa0>] psr: 400001d3 sp : c1001f50 ip : 00000000 fp : 00000000 r10: c1035b18 r9 : c1005f30 r8 : 6920890d r7 : 00000001 r6 : c10b40c0 r5 : c103aed8 r4 : c1136b8c r3 : c030d820 r2 : 00cf9974 r1 : 6e07c059 r0 : 00000000 Flags: nZcv IRQs off FIQs off Mode SVC_32 ISA ARM Segment none Control: 10c53c7d Table: 6e07c059 DAC: 00000051 Process swapper (pid: 0, stack limit = 0xc1000218) Stack: (0xc1001f50 to 0xc1002000) 1f40: c10fdf95 c034e090 00000000 c1035b18 1f60: c100615c c030c590 c1039780 6422fd21 00000000 c10fdf95 c10fdf95 c1000000 1f80: c100212c c10b3560 c1002134 c10fdf95 c1001fa4 c0a95914 c1035f80 c1000000 1fa0: c1001fac c0a95b14 c10b4020 c0357edc 00000001 ffffffff 00000000 c0f00c44 1fc0: ffffffff ffffffff 00000000 c0f0068c 00000000 c0f8ba20 c11001d4 c10020b4 1fe0: c0f8ba1c c10070f8 40204059 410fc0f4 00000000 40208078 00000000 00000000 [<c0309fa0>] (cpu_init) from [<c034e090>] (atomic_notifier_call_chain+0x18/0x20) [<c034e090>] (atomic_notifier_call_chain) from [<c030c590>] (__switch_to+0x34/0x64) Code: c103aec8 c103aec8 c03cc8f4 00000000 (00000000) ---[ end trace cb88537fdc8fa202 ]--- Kernel panic - not syncing: Attempted to kill the idle task! ---[ end Kernel panic - not syncing: Attempted to kill the idle task!
[PYBOOT] [arndale 01:08]: got exception: panic ~$off
[PYBOOT] [arndale 01:09]: Done. Board bbb-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.571711] omap_hsmmc 48060000.mmc: Got CD GPIO [ 1.637707] Synopsys Designware Multimedia Card Interface Driver [ 1.645492] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.655400] ledtrig-cpu: registered to indicate activity on CPUs [ 1.662648] usbcore: registered new interface driver usbhid [ 1.668574] usbhid: USB HID core driver [ 1.680565] NET: Registered protocol family 10 [ 1.687097] sit: IPv6 over IPv4 tunneling driver [ 1.693259] NET: Registered protocol family 17 [ 1.698018] can: controller area network core (rev 20120528 abi 9) [ 1.704657] NET: Registered protocol family 29 [ 1.709365] can: raw protocol (rev 20120528) [ 1.713875] can: broadcast manager protocol (rev 20120528 t) [ 1.719859] can: netlink gateway (rev 20130117) max_hops=1 [ 1.726611] Key type dns_resolver registered [ 1.731485] omap_voltage_late_init: Voltage driver support not added [ 1.738470] ThumbEE CPU extension supported. [ 1.743024] Registering SWP/SWPB emulation handler [ 1.787766] tps65217 0-0024: TPS65217 ID 0xe version 1.2 [ 1.794326] at24 0-0050: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.802088] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 1.810815] at24 2-0054: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.818726] at24 2-0055: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.826632] at24 2-0056: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.834459] at24 2-0057: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.841813] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz [ 1.848875] hctosys: unable to open rtc device (rtc0) [ 1.862273] Waiting for root device /dev/mmcblk0p2... [ 1.868034] mmc1: new high speed MMC card at address 0001 [ 1.874816] mmcblk1: mmc1:0001 MMC02G 1.79 GiB [ 1.880096] mmcblk1boot0: mmc1:0001 MMC02G partition 1 1.00 MiB [ 1.886752] mmcblk1boot1: mmc1:0001 MMC02G partition 2 1.00 MiB [ 1.895381] mmcblk1: p1 p2
[PYBOOT] [bbb 01:58]: Timed out waiting for "<type 'str'>":
[PYBOOT] [bbb 01:59]: got exception: timeout ~$off
[PYBOOT] [bbb 02:00]: Done. Board bbb-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
sdhci: Secure Digital Host Controller Interface driver sdhci: Copyright(c) Pierre Ossman omap_hsmmc 48060000.mmc: Got CD GPIO Synopsys Designware Multimedia Card Interface Driver sdhci-pltfm: SDHCI platform and OF driver helper ledtrig-cpu: registered to indicate activity on CPUs usbcore: registered new interface driver usbhid usbhid: USB HID core driver NET: Registered protocol family 10 sit: IPv6 over IPv4 tunneling driver NET: Registered protocol family 17 can: controller area network core (rev 20120528 abi 9) NET: Registered protocol family 29 can: raw protocol (rev 20120528) can: broadcast manager protocol (rev 20120528 t) can: netlink gateway (rev 20130117) max_hops=1 Key type dns_resolver registered omap_voltage_late_init: Voltage driver support not added ThumbEE CPU extension supported. at24 0-0050: 32768 byte 24c256 EEPROM, writable, 1 bytes/write omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz at24 2-0054: 32768 byte 24c256 EEPROM, writable, 1 bytes/write at24 2-0055: 32768 byte 24c256 EEPROM, writable, 1 bytes/write at24 2-0056: 32768 byte 24c256 EEPROM, writable, 1 bytes/write at24 2-0057: 32768 byte 24c256 EEPROM, writable, 1 bytes/write omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz hctosys: unable to open rtc device (rtc0) Waiting for root device /dev/mmcblk0p2... mmc1: new high speed MMC card at address 0001 mmcblk1: mmc1:0001 MMC02G 1.79 GiB mmcblk1boot0: mmc1:0001 MMC02G partition 1 1.00 MiB mmcblk1boot1: mmc1:0001 MMC02G partition 2 1.00 MiB mmcblk1: p1 p2
[PYBOOT] [bbb 02:00]: Timed out waiting for "<type 'str'>":
[PYBOOT] [bbb 02:01]: got exception: timeout ~$off
[PYBOOT] [bbb 02:02]: Done. Board bbb-arm-omap2plus_defconfig failure log: -------------------------------------------------
[ 2.068653] omap_hsmmc 481d8000.mmc: lookup for GPIO cd failed [ 2.074784] omap_hsmmc 481d8000.mmc: GPIO lookup for consumer wp [ 2.081123] omap_hsmmc 481d8000.mmc: using device tree for GPIO lookup [ 2.088012] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@481d8000[0]' [ 2.097622] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@481d8000[0]' [ 2.107137] omap_hsmmc 481d8000.mmc: using lookup tables for GPIO lookup [ 2.114166] omap_hsmmc 481d8000.mmc: lookup for GPIO wp failed [ 2.157283] ledtrig-cpu: registered to indicate activity on CPUs [ 2.165999] oprofile: using arm/armv7 [ 2.171017] Initializing XFRM netlink socket [ 2.176161] NET: Registered protocol family 10 [ 2.186891] sit: IPv6 over IPv4 tunneling driver [ 2.195740] NET: Registered protocol family 17 [ 2.200683] NET: Registered protocol family 15 [ 2.205930] Key type dns_resolver registered [ 2.210786] omap_voltage_late_init: Voltage driver support not added [ 2.217531] sr_dev_init: No voltage domain specified for smartreflex0. Cannot initialize [ 2.226011] sr_dev_init: No voltage domain specified for smartreflex1. Cannot initialize [ 2.235648] ThumbEE CPU extension supported. [ 2.240294] Registering SWP/SWPB emulation handler [ 2.245323] SmartReflex Class3 initialized [ 2.318858] mmc1: new high speed MMC card at address 0001 [ 2.329145] tps65217 0-0024: TPS65217 ID 0xe version 1.2 [ 2.336431] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 2.346347] mmcblk1: mmc1:0001 MMC02G 1.79 GiB [ 2.358918] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz [ 2.365414] mmcblk1boot0: mmc1:0001 MMC02G partition 1 1.00 MiB [ 2.373676] mmcblk1boot1: mmc1:0001 MMC02G partition 2 1.00 MiB [ 2.384432] hctosys: unable to open rtc device (rtc0) [ 2.389881] sr_init: No PMIC hook to init smartreflex [ 2.395572] sr_init: platform driver register failed for SR [ 2.440533] mmcblk1: p1 p2 [ 2.458857] Waiting for root device /dev/mmcblk0p2...
[PYBOOT] [bbb 01:51]: Timed out waiting for "<type 'str'>":
[PYBOOT] [bbb 01:52]: got exception: timeout ~$off
[PYBOOT] [bbb 01:54]: Done. Board beagleboard-x15-arm-multi_lpae_defconfig failure log: -------------------------------------------------
[ 2.391337] [<c0783138>] (driver_probe_device) from [<c0781540>] (bus_for_each_drv+0x64/0x98) [ 2.400275] [<c0781540>] (bus_for_each_drv) from [<c0782e48>] (__device_attach+0xb0/0x110) [ 2.408932] [<c0782e48>] (__device_attach) from [<c0782484>] (bus_probe_device+0x84/0x8c) [ 2.417495] [<c0782484>] (bus_probe_device) from [<c0780840>] (device_add+0x3e4/0x56c) [ 2.425784] [<c0780840>] (device_add) from [<c0980538>] (i2c_new_device+0x148/0x190) [ 2.433894] [<c0980538>] (i2c_new_device) from [<c0980988>] (of_i2c_register_device+0x118/0x1b4) [ 2.443097] [<c0980988>] (of_i2c_register_device) from [<c0980cb0>] (i2c_register_adapter+0x198/0x34c) [ 2.452851] [<c0980cb0>] (i2c_register_adapter) from [<c098a598>] (omap_i2c_probe+0x50c/0x6b0) [ 2.461870] [<c098a598>] (omap_i2c_probe) from [<c0784a18>] (platform_drv_probe+0x4c/0xb0) [ 2.470533] [<c0784a18>] (platform_drv_probe) from [<c0783138>] (driver_probe_device+0x214/0x2c0) [ 2.479825] [<c0783138>] (driver_probe_device) from [<c0781540>] (bus_for_each_drv+0x64/0x98) [ 2.488754] [<c0781540>] (bus_for_each_drv) from [<c0782e48>] (__device_attach+0xb0/0x110) [ 2.497410] [<c0782e48>] (__device_attach) from [<c0782484>] (bus_probe_device+0x84/0x8c) [ 2.505980] [<c0782484>] (bus_probe_device) from [<c0782914>] (deferred_probe_work_func+0x68/0x98) [ 2.515372] [<c0782914>] (deferred_probe_work_func) from [<c0357638>] (process_one_work+0x138/0x348) [ 2.524947] [<c0357638>] (process_one_work) from [<c0357880>] (worker_thread+0x38/0x510) [ 2.533430] [<c0357880>] (worker_thread) from [<c035cb28>] (kthread+0xdc/0xf4) [ 2.540992] [<c035cb28>] (kthread) from [<c0307ef8>] (ret_from_fork+0x14/0x3c) [ 2.548590] ---[ end trace bc99a25f7f1e3937 ]--- [ 2.553636] palmas-pmic: probe of 48070000.i2c:tps659038@58:tps659038_pmic failed with error -22 [ 2.567340] palmas-rtc 48070000.i2c:tps659038@58:tps659038_rtc: rtc core: registered 48070000.i2c:tps659 as rtc1 [ 2.582111] at24 0-0050: 4096 byte 24c32 EEPROM, writable, 1 bytes/write [ 2.589179] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 2.615036] rtc-ds1307 2-006f: SET TIME! [ 2.620804] rtc-ds1307 2-006f: rtc core: registered mcp7941x as rtc0 [ 2.627555] rtc-ds1307 2-006f: 64 bytes nvram [ 2.632160] omap_i2c 48060000.i2c: bus 2 rev0.12 at 400 kHz [ 2.642053] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 2.675318] rtc-ds1307 2-006f: setting system clock to 2001-01-01 00:00:00 UTC (978307200) [ 2.693007] vdd_3v3: disabling [ 2.696224] aic_dvdd_fixed: disabling [ 2.700070] pbias_mmc_omap5: disabling [ 2.704851] Waiting for root device /dev/mmcblk0p1...
[PYBOOT] [beagleboard-x15 02:00]: Timed out waiting for "<type 'str'>":
[PYBOOT] [beagleboard-x15 02:01]: got exception: timeout ~$off
[PYBOOT] [beagleboard-x15 02:03]: Done. Board beagleboard-x15-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 2.391004] [<c0781540>] (bus_for_each_drv) from [<c0782e48>] (__device_attach+0xb0/0x110) [ 2.399664] [<c0782e48>] (__device_attach) from [<c0782484>] (bus_probe_device+0x84/0x8c) [ 2.408233] [<c0782484>] (bus_probe_device) from [<c0780840>] (device_add+0x3e4/0x56c) [ 2.416529] [<c0780840>] (device_add) from [<c0980538>] (i2c_new_device+0x148/0x190) [ 2.424644] [<c0980538>] (i2c_new_device) from [<c0980988>] (of_i2c_register_device+0x118/0x1b4) [ 2.433837] [<c0980988>] (of_i2c_register_device) from [<c0980cb0>] (i2c_register_adapter+0x198/0x34c) [ 2.443587] [<c0980cb0>] (i2c_register_adapter) from [<c098a598>] (omap_i2c_probe+0x50c/0x6b0) [ 2.452623] [<c098a598>] (omap_i2c_probe) from [<c0784a18>] (platform_drv_probe+0x4c/0xb0) [ 2.461281] [<c0784a18>] (platform_drv_probe) from [<c0783138>] (driver_probe_device+0x214/0x2c0) [ 2.470577] [<c0783138>] (driver_probe_device) from [<c0781540>] (bus_for_each_drv+0x64/0x98) [ 2.479509] [<c0781540>] (bus_for_each_drv) from [<c0782e48>] (__device_attach+0xb0/0x110) [ 2.488175] [<c0782e48>] (__device_attach) from [<c0782484>] (bus_probe_device+0x84/0x8c) [ 2.496738] [<c0782484>] (bus_probe_device) from [<c0782914>] (deferred_probe_work_func+0x68/0x98) [ 2.506122] [<c0782914>] (deferred_probe_work_func) from [<c0357638>] (process_one_work+0x138/0x348) [ 2.515687] [<c0357638>] (process_one_work) from [<c0357880>] (worker_thread+0x38/0x510) [ 2.524166] [<c0357880>] (worker_thread) from [<c035cb28>] (kthread+0xdc/0xf4) [ 2.531729] [<c035cb28>] (kthread) from [<c0307ef8>] (ret_from_fork+0x14/0x3c) [ 2.539332] ---[ end trace b3dd2798a63b9ce8 ]--- [ 2.544384] palmas-pmic: probe of 48070000.i2c:tps659038@58:tps659038_pmic failed with error -22 [ 2.558129] palmas-rtc 48070000.i2c:tps659038@58:tps659038_rtc: rtc core: registered 48070000.i2c:tps659 as rtc1 [ 2.572941] at24 0-0050: 4096 byte 24c32 EEPROM, writable, 1 bytes/write [ 2.580015] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 2.605107] rtc-ds1307 2-006f: SET TIME! [ 2.610880] rtc-ds1307 2-006f: rtc core: registered mcp7941x as rtc0 [ 2.617627] rtc-ds1307 2-006f: 64 bytes nvram [ 2.622239] omap_i2c 48060000.i2c: bus 2 rev0.12 at 400 kHz [ 2.632115] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 2.657450] omap_hwmod: gpio6: _wait_target_disable failed [ 2.670377] rtc-ds1307 2-006f: setting system clock to 2001-01-01 00:00:00 UTC (978307200) [ 2.688097] vdd_3v3: disabling [ 2.691309] aic_dvdd_fixed: disabling [ 2.695158] pbias_mmc_omap5: disabling [ 2.699927] Waiting for root device /dev/mmcblk0p1...
[PYBOOT] [beagleboard-x15 01:46]: Timed out waiting for "<type 'str'>":
[PYBOOT] [beagleboard-x15 01:47]: got exception: timeout ~$off
[PYBOOT] [beagleboard-x15 01:48]: Done. Board beagleboard-x15-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
[<c070102c>] (driver_probe_device) from [<c06ff574>] (bus_for_each_drv+0x64/0x98) [<c06ff574>] (bus_for_each_drv) from [<c0700d3c>] (__device_attach+0xb0/0x110) [<c0700d3c>] (__device_attach) from [<c0700378>] (bus_probe_device+0x84/0x8c) [<c0700378>] (bus_probe_device) from [<c06fe794>] (device_add+0x3e4/0x56c) [<c06fe794>] (device_add) from [<c08bdf20>] (i2c_new_device+0x148/0x190) [<c08bdf20>] (i2c_new_device) from [<c08be600>] (i2c_register_adapter+0x3a8/0x4c8) [<c08be600>] (i2c_register_adapter) from [<c08c786c>] (omap_i2c_probe+0x50c/0x6b0) [<c08c786c>] (omap_i2c_probe) from [<c07028c4>] (platform_drv_probe+0x4c/0xb0) [<c07028c4>] (platform_drv_probe) from [<c070102c>] (driver_probe_device+0x214/0x2c0) [<c070102c>] (driver_probe_device) from [<c06ff574>] (bus_for_each_drv+0x64/0x98) [<c06ff574>] (bus_for_each_drv) from [<c0700d3c>] (__device_attach+0xb0/0x110) [<c0700d3c>] (__device_attach) from [<c0700378>] (bus_probe_device+0x84/0x8c) [<c0700378>] (bus_probe_device) from [<c0700808>] (deferred_probe_work_func+0x68/0x98) [<c0700808>] (deferred_probe_work_func) from [<c0348698>] (process_one_work+0xfc/0x31c) [<c0348698>] (process_one_work) from [<c0348904>] (worker_thread+0x4c/0x4d8) [<c0348904>] (worker_thread) from [<c034d67c>] (kthread+0xd4/0xec) [<c034d67c>] (kthread) from [<c0307b98>] (ret_from_fork+0x14/0x3c) ---[ end trace cb88537fdc8fa205 ]--- palmas-pmic: probe of 48070000.i2c:tps659038@58:tps659038_pmic failed with error -22 palmas-rtc 48070000.i2c:tps659038@58:tps659038_rtc: rtc core: registered 48070000.i2c:tps659 as rtc1 at24 0-0050: 4096 byte 24c32 EEPROM, writable, 1 bytes/write omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz rtc-ds1307 2-006f: SET TIME! rtc-ds1307 2-006f: rtc core: registered mcp7941x as rtc0 rtc-ds1307 2-006f: 64 bytes nvram omap_i2c 48060000.i2c: bus 2 rev0.12 at 400 kHz omap_hsmmc 4809c000.mmc: Got CD GPIO omap_hwmod: gpio6: _wait_target_disable failed rtc-ds1307 2-006f: setting system clock to 2001-01-01 00:00:00 UTC (978307200) vdd_3v3: disabling aic_dvdd_fixed: disabling pbias_mmc_omap5: disabling Waiting for root device /dev/mmcblk0p1...
[PYBOOT] [beagleboard-x15 01:48]: Timed out waiting for "<type 'str'>":
[PYBOOT] [beagleboard-x15 01:49]: got exception: timeout ~$off
[PYBOOT] [beagleboard-x15 01:50]: Done. Board beagleboard-x15-arm-omap2plus_defconfig failure log: -------------------------------------------------
[ 4.648232] gpiochip_setup_dev: registered GPIOs 504 to 511 on device: gpiochip8 (48070000.i2c:tps659038@58:tps659038_gpio) [ 4.661388] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 4.669136] omap_i2c 48060000.i2c: bus 2 rev0.12 at 400 kHz [ 4.675505] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer cd [ 4.681842] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 4.688735] of_get_named_gpiod_flags: parsed 'cd-gpios' property of node '/ocp/mmc@4809c000[0]' - status (0) [ 4.699140] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 4.703989] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer wp [ 4.710303] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 4.717165] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@4809c000[0]' [ 4.726753] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@4809c000[0]' [ 4.736260] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 4.743329] omap_hsmmc 4809c000.mmc: lookup for GPIO wp failed [ 4.777767] omap_hsmmc 480b4000.mmc: GPIO lookup for consumer cd [ 4.784066] omap_hsmmc 480b4000.mmc: using device tree for GPIO lookup [ 4.790949] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/ocp/mmc@480b4000[0]' [ 4.800546] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/ocp/mmc@480b4000[0]' [ 4.810047] omap_hsmmc 480b4000.mmc: using lookup tables for GPIO lookup [ 4.817091] omap_hsmmc 480b4000.mmc: lookup for GPIO cd failed [ 4.823215] omap_hsmmc 480b4000.mmc: GPIO lookup for consumer wp [ 4.829531] omap_hsmmc 480b4000.mmc: using device tree for GPIO lookup [ 4.836375] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@480b4000[0]' [ 4.845973] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@480b4000[0]' [ 4.855472] omap_hsmmc 480b4000.mmc: using lookup tables for GPIO lookup [ 4.862530] omap_hsmmc 480b4000.mmc: lookup for GPIO wp failed [ 4.876103] omap_hwmod: gpio6: _wait_target_disable failed [ 4.908006] hctosys: unable to open rtc device (rtc0) [ 4.913297] sr_init: No PMIC hook to init smartreflex [ 4.918817] sr_init: platform driver register failed for SR [ 4.965134] vdd_3v3: disabling [ 4.968367] aic_dvdd_fixed: disabling [ 4.972242] pbias_mmc_omap5: disabling [ 4.978835] Waiting for root device /dev/mmcblk0p1...
[PYBOOT] [beagleboard-x15 01:45]: Timed out waiting for "<type 'str'>":
[PYBOOT] [beagleboard-x15 01:46]: got exception: timeout ~$off
[PYBOOT] [beagleboard-x15 01:47]: Done. Board beaver-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 3.298137] pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt [ 3.305094] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt [ 3.311614] pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded [ 3.318492] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 3.324078] r8169 0000:01:00.0: enabling device (0140 -> 0143) [ 3.331162] r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xf09f2000, 02:04:4b:01:60:99, XID 0c900800 IRQ 375 [ 3.341163] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 3.352828] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.359447] [drm] No driver support for vblank timestamp query. [ 3.365381] drm drm: No connectors reported connected with modes [ 3.371387] [drm] Cannot find any crtc or sizes - going 1024x768 [ 3.397138] Console: switching to colour frame buffer device 128x48 [ 3.409385] drm drm: fb0: frame buffer device [ 3.428417] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.439184] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 3.445650] tegra-ehci 7d004000.usb: EHCI Host Controller [ 3.451060] tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1 [ 3.458900] tegra-ehci 7d004000.usb: irq 343, io mem 0x7d004000 [ 3.473430] tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.00 [ 3.480305] hub 1-0:1.0: USB hub found [ 3.484083] hub 1-0:1.0: 1 port detected [ 3.489024] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.494436] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 3.502168] tegra-ehci 7d008000.usb: irq 344, io mem 0x7d008000 [ 3.513424] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.00 [ 3.520195] hub 2-0:1.0: USB hub found [ 3.523975] hub 2-0:1.0: 1 port detected [ 3.532427] tps65910-rtc tps65910-rtc: setting system clock to 2000-01-01 00:00:02 UTC (946684802) [ 3.546104] vdd_sata,avdd_plle: disabling [ 3.550506] usb1_vbus: disabling [ 3.554567] Waiting for root device /dev/mmcblk0p1... [ 3.833431] usb 2-1: new high-speed USB device number 2 using tegra-ehci [ 4.772014] asix 2-1:1.0 eth1: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 58:6d:8f:50:ba:18
[PYBOOT] [beaver 01:46]: Timed out waiting for "<type 'str'>":
[PYBOOT] [beaver 01:47]: got exception: timeout ~$off
[PYBOOT] [beaver 01:49]: Done. Board beaver-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt pci 0000:01:00.0: Signaling PME through PCIe PME interrupt pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded r8169 0000:01:00.0: enabling device (0140 -> 0143) r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xf087e000, 02:04:4b:01:60:99, XID 0c900800 IRQ 375 r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [drm] No driver support for vblank timestamp query. drm drm: No connectors reported connected with modes [drm] Cannot find any crtc or sizes - going 1024x768 Console: switching to colour frame buffer device 128x48 drm drm: fb0: frame buffer device [drm] Initialized tegra 0.0.0 20120330 on minor 0 utmi_phy_clk_enable: timeout waiting for phy to stabilize tegra-ehci 7d004000.usb: EHCI Host Controller tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1 tegra-ehci 7d004000.usb: irq 343, io mem 0x7d004000 tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.00 hub 1-0:1.0: USB hub found hub 1-0:1.0: 1 port detected tegra-ehci 7d008000.usb: EHCI Host Controller tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 tegra-ehci 7d008000.usb: irq 344, io mem 0x7d008000 tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.00 hub 2-0:1.0: USB hub found hub 2-0:1.0: 1 port detected tps65910-rtc tps65910-rtc: setting system clock to 2000-01-01 00:00:01 UTC (946684801) vdd_sata,avdd_plle: disabling usb1_vbus: disabling Waiting for root device /dev/mmcblk0p1... usb 2-1: new high-speed USB device number 2 using tegra-ehci asix 2-1:1.0 eth1: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 58:6d:8f:50:ba:18
[PYBOOT] [beaver 01:48]: Timed out waiting for "<type 'str'>":
[PYBOOT] [beaver 01:49]: got exception: timeout ~$off
[PYBOOT] [beaver 01:51]: Done. Board beaver-arm-tegra_defconfig failure log: -------------------------------------------------
[ 6.077008] pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded [ 6.083961] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 6.089564] r8169 0000:01:00.0: enabling device (0140 -> 0143) [ 6.097097] r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xf087e000, 02:04:4b:01:60:99, XID 0c900800 IRQ 375 [ 6.107097] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 6.119982] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 6.126617] [drm] No driver support for vblank timestamp query. [ 6.132610] drm drm: No connectors reported connected with modes [ 6.138634] [drm] Cannot find any crtc or sizes - going 1024x768 [ 6.164272] Console: switching to colour frame buffer device 128x48 [ 6.176064] drm drm: fb0: frame buffer device [ 6.203585] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 6.212873] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 6.219354] tegra-ehci 7d004000.usb: EHCI Host Controller [ 6.224786] tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1 [ 6.232757] tegra-ehci 7d004000.usb: irq 343, io mem 0x7d004000 [ 6.253585] tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.00 [ 6.261306] hub 1-0:1.0: USB hub found [ 6.265101] hub 1-0:1.0: 1 port detected [ 6.269923] tegra-ehci 7d008000.usb: EHCI Host Controller [ 6.275370] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 6.283230] tegra-ehci 7d008000.usb: irq 344, io mem 0x7d008000 [ 6.303580] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.00 [ 6.311168] hub 2-0:1.0: USB hub found [ 6.314954] hub 2-0:1.0: 1 port detected [ 6.323263] tps65910-rtc tps65910-rtc: setting system clock to 2000-01-01 00:00:02 UTC (946684802) [ 6.342031] vdd_sata,avdd_plle: disabling [ 6.346534] usb1_vbus: disabling [ 6.349946] ALSA device list: [ 6.352904] #0: NVIDIA Tegra Beaver [ 6.357142] Waiting for root device /dev/mmcblk0p1... [ 6.633583] usb 2-1: new high-speed USB device number 2 using tegra-ehci [ 7.618877] asix 2-1:1.0 eth1: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 58:6d:8f:50:ba:18
[PYBOOT] [beaver 01:46]: Timed out waiting for "<type 'str'>":
[PYBOOT] [beaver 01:47]: got exception: timeout ~$off
[PYBOOT] [beaver 01:48]: Done. Board colombus-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
[....] Waiting for /dev to be fully populated...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Activating swap...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. EXT4-fs (mmcblk0p1): warning: mounting fs with errors, running e2fsck is recommended EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [....] Cleaning up temporary files... /tmp[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] Activating lvm and md swap...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Checking file systems...fsck from util-linux 2.20.1 [?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Mounting local filesystems...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Activating swapfile swap...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Cleaning up temporary files...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] Setting kernel variables ...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. random: dd urandom read with 58 bits of entropy available [....] Configuring network interfaces...Internet Systems Consortium DHCP Client 4.2.2 Copyright 2004-2011 Internet Systems Consortium. All rights reserved. For info, please visit https://www.isc.org/software/dhcp/
eth0: device MAC address 6e:17:cd:d0:f3:aa RX IPC Checksum Offload disabled No MAC Management Counters available IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready Listening on LPF/eth0/6e:17:cd:d0:f3:aa Sending on LPF/eth0/6e:17:cd:d0:f3:aa Sending on Socket/fallback DHCPREQUEST on eth0 to 255.255.255.255 port 67 DHCPREQUEST on eth0 to 255.255.255.255 port 67 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 7 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 8 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 10 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 14 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 14
[PYBOOT] [colombus 03:16]: Timed out waiting for "<type 'str'>": DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 8
[PYBOOT] [colombus 03:17]: got exception: timeout ~$off
[PYBOOT] [colombus 03:18]: Done. Board cosmic-arm-imx_v6_v7_defconfig failure log: -------------------------------------------------
[ 14.474861] blk_update_request: I/O error, dev mmcblk0, sector 3633185 [ 18.549093] mmcblk0: error -110 transferring data, sector 3633186, nr 230, cmd response 0x900, card status 0x0 [ 18.559423] blk_update_request: I/O error, dev mmcblk0, sector 3633186 [ 22.633649] mmcblk0: error -110 transferring data, sector 3633187, nr 229, cmd response 0x900, card status 0x0 [ 22.643975] blk_update_request: I/O error, dev mmcblk0, sector 3633187 [ 26.718145] mmcblk0: error -110 transferring data, sector 3633188, nr 228, cmd response 0x900, card status 0x0 [ 26.728469] blk_update_request: I/O error, dev mmcblk0, sector 3633188 [ 30.802704] mmcblk0: error -110 transferring data, sector 3633189, nr 227, cmd response 0x900, card status 0x0 [ 30.813036] blk_update_request: I/O error, dev mmcblk0, sector 3633189 [ 34.887214] mmcblk0: error -110 transferring data, sector 3633190, nr 226, cmd response 0x900, card status 0x0 [ 34.897545] blk_update_request: I/O error, dev mmcblk0, sector 3633190 [ 38.971785] mmcblk0: error -110 transferring data, sector 3633191, nr 225, cmd response 0x900, card status 0x0 [ 38.982115] blk_update_request: I/O error, dev mmcblk0, sector 3633191 [ 43.056300] mmcblk0: error -110 transferring data, sector 3633192, nr 224, cmd response 0x900, card status 0x0 [ 43.066629] blk_update_request: I/O error, dev mmcblk0, sector 3633192 [ 47.140864] mmcblk0: error -110 transferring data, sector 3633193, nr 223, cmd response 0x900, card status 0x0 [ 47.151187] blk_update_request: I/O error, dev mmcblk0, sector 3633193 [ 51.225361] mmcblk0: error -110 transferring data, sector 3633194, nr 222, cmd response 0x900, card status 0x0 [ 51.235680] blk_update_request: I/O error, dev mmcblk0, sector 3633194 [ 55.309911] mmcblk0: error -110 transferring data, sector 3633195, nr 221, cmd response 0x900, card status 0x0 [ 55.320234] blk_update_request: I/O error, dev mmcblk0, sector 3633195 [ 59.394456] mmcblk0: error -110 transferring data, sector 3633196, nr 220, cmd response 0x900, card status 0x0 [ 59.404781] blk_update_request: I/O error, dev mmcblk0, sector 3633196 [ 63.479008] mmcblk0: error -110 transferring data, sector 3633197, nr 219, cmd response 0x900, card status 0x0 [ 63.489333] blk_update_request: I/O error, dev mmcblk0, sector 3633197 [ 67.563551] mmcblk0: error -110 transferring data, sector 3633198, nr 218, cmd response 0x900, card status 0x0 [ 67.573878] blk_update_request: I/O error, dev mmcblk0, sector 3633198 [ 71.648045] mmcblk0: error -110 transferring data, sector 3633199, nr 217, cmd response 0x900, card status 0x0 [ 71.658372] blk_update_request: I/O error, dev mmcblk0, sector 3633199 [ 75.732611] mmcblk0: error -110 transferring data, sector 3633200, nr 216, cmd response 0x900, card status 0x0 [ 75.742935] blk_update_request: I/O error, dev mmcblk0, sector 3633200 [ 79.817097] mmcblk0: error -110 transferring data, sector 3633201, nr 215, cmd response 0x900, card status 0x0 [ 79.827428] blk_update_request: I/O error, dev mmcblk0, sector 3633201
[PYBOOT] [cosmic 01:59]: Timed out waiting for "<type 'str'>":
[PYBOOT] [cosmic 02:00]: got exception: timeout ~$off
[PYBOOT] [cosmic 02:01]: Done. Board cosmic-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 14.070138] blk_update_request: I/O error, dev mmcblk0, sector 3633185 [ 18.144125] mmcblk0: error -110 transferring data, sector 3633186, nr 230, cmd response 0x900, card status 0x0 [ 18.154206] blk_update_request: I/O error, dev mmcblk0, sector 3633186 [ 22.228193] mmcblk0: error -110 transferring data, sector 3633187, nr 229, cmd response 0x900, card status 0x0 [ 22.238275] blk_update_request: I/O error, dev mmcblk0, sector 3633187 [ 26.312262] mmcblk0: error -110 transferring data, sector 3633188, nr 228, cmd response 0x900, card status 0x0 [ 26.322344] blk_update_request: I/O error, dev mmcblk0, sector 3633188 [ 30.396327] mmcblk0: error -110 transferring data, sector 3633189, nr 227, cmd response 0x900, card status 0x0 [ 30.406413] blk_update_request: I/O error, dev mmcblk0, sector 3633189 [ 34.480398] mmcblk0: error -110 transferring data, sector 3633190, nr 226, cmd response 0x900, card status 0x0 [ 34.490481] blk_update_request: I/O error, dev mmcblk0, sector 3633190 [ 38.564465] mmcblk0: error -110 transferring data, sector 3633191, nr 225, cmd response 0x900, card status 0x0 [ 38.574536] blk_update_request: I/O error, dev mmcblk0, sector 3633191 [ 42.648531] mmcblk0: error -110 transferring data, sector 3633192, nr 224, cmd response 0x900, card status 0x0 [ 42.658606] blk_update_request: I/O error, dev mmcblk0, sector 3633192 [ 46.732589] mmcblk0: error -110 transferring data, sector 3633193, nr 223, cmd response 0x900, card status 0x0 [ 46.742682] blk_update_request: I/O error, dev mmcblk0, sector 3633193 [ 50.816669] mmcblk0: error -110 transferring data, sector 3633194, nr 222, cmd response 0x900, card status 0x0 [ 50.826742] blk_update_request: I/O error, dev mmcblk0, sector 3633194 [ 54.900723] mmcblk0: error -110 transferring data, sector 3633195, nr 221, cmd response 0x900, card status 0x0 [ 54.910802] blk_update_request: I/O error, dev mmcblk0, sector 3633195 [ 58.984844] mmcblk0: error -110 transferring data, sector 3633196, nr 220, cmd response 0x900, card status 0x0 [ 58.994914] blk_update_request: I/O error, dev mmcblk0, sector 3633196 [ 63.068897] mmcblk0: error -110 transferring data, sector 3633197, nr 219, cmd response 0x900, card status 0x0 [ 63.078974] blk_update_request: I/O error, dev mmcblk0, sector 3633197 [ 67.152952] mmcblk0: error -110 transferring data, sector 3633198, nr 218, cmd response 0x900, card status 0x0 [ 67.163034] blk_update_request: I/O error, dev mmcblk0, sector 3633198 [ 71.237020] mmcblk0: error -110 transferring data, sector 3633199, nr 217, cmd response 0x900, card status 0x0 [ 71.247103] blk_update_request: I/O error, dev mmcblk0, sector 3633199 [ 75.321090] mmcblk0: error -110 transferring data, sector 3633200, nr 216, cmd response 0x900, card status 0x0 [ 75.331171] blk_update_request: I/O error, dev mmcblk0, sector 3633200 [ 79.405152] mmcblk0: error -110 transferring data, sector 3633201, nr 215, cmd response 0x900, card status 0x0 [ 79.415231] blk_update_request: I/O error, dev mmcblk0, sector 3633201
[PYBOOT] [cosmic 02:02]: Timed out waiting for "<type 'str'>":
[PYBOOT] [cosmic 02:03]: got exception: timeout ~$off
[PYBOOT] [cosmic 02:04]: Done. Board cosmic-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
blk_update_request: I/O error, dev mmcblk0, sector 3633185 mmcblk0: error -110 transferring data, sector 3633186, nr 230, cmd response 0x900, card status 0x0 blk_update_request: I/O error, dev mmcblk0, sector 3633186 mmcblk0: error -110 transferring data, sector 3633187, nr 229, cmd response 0x900, card status 0x0 blk_update_request: I/O error, dev mmcblk0, sector 3633187 mmcblk0: error -110 transferring data, sector 3633188, nr 228, cmd response 0x900, card status 0x0 blk_update_request: I/O error, dev mmcblk0, sector 3633188 mmcblk0: error -110 transferring data, sector 3633189, nr 227, cmd response 0x900, card status 0x0 blk_update_request: I/O error, dev mmcblk0, sector 3633189 mmcblk0: error -110 transferring data, sector 3633190, nr 226, cmd response 0x900, card status 0x0 blk_update_request: I/O error, dev mmcblk0, sector 3633190 mmcblk0: error -110 transferring data, sector 3633191, nr 225, cmd response 0x900, card status 0x0 blk_update_request: I/O error, dev mmcblk0, sector 3633191 mmcblk0: error -110 transferring data, sector 3633192, nr 224, cmd response 0x900, card status 0x0 blk_update_request: I/O error, dev mmcblk0, sector 3633192 mmcblk0: error -110 transferring data, sector 3633193, nr 223, cmd response 0x900, card status 0x0 blk_update_request: I/O error, dev mmcblk0, sector 3633193 mmcblk0: error -110 transferring data, sector 3633194, nr 222, cmd response 0x900, card status 0x0 blk_update_request: I/O error, dev mmcblk0, sector 3633194 mmcblk0: error -110 transferring data, sector 3633195, nr 221, cmd response 0x900, card status 0x0 blk_update_request: I/O error, dev mmcblk0, sector 3633195 mmcblk0: error -110 transferring data, sector 3633196, nr 220, cmd response 0x900, card status 0x0 blk_update_request: I/O error, dev mmcblk0, sector 3633196 mmcblk0: error -110 transferring data, sector 3633197, nr 219, cmd response 0x900, card status 0x0 blk_update_request: I/O error, dev mmcblk0, sector 3633197 mmcblk0: error -110 transferring data, sector 3633198, nr 218, cmd response 0x900, card status 0x0 blk_update_request: I/O error, dev mmcblk0, sector 3633198 mmcblk0: error -110 transferring data, sector 3633199, nr 217, cmd response 0x900, card status 0x0 blk_update_request: I/O error, dev mmcblk0, sector 3633199 mmcblk0: error -110 transferring data, sector 3633200, nr 216, cmd response 0x900, card status 0x0 blk_update_request: I/O error, dev mmcblk0, sector 3633200 mmcblk0: error -110 transferring data, sector 3633201, nr 215, cmd response 0x900, card status 0x0 blk_update_request: I/O error, dev mmcblk0, sector 3633201
[PYBOOT] [cosmic 02:20]: Timed out waiting for "<type 'str'>":
[PYBOOT] [cosmic 02:21]: got exception: timeout ~$off
[PYBOOT] [cosmic 02:22]: Done. Board dalmore-arm-multi_lpae_defconfig failure log: -------------------------------------------------
[ 2.863792] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 2.875234] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 2.886905] tegra-dsi 54300000.dsi: cannot get VDD supply [ 2.903905] tegra-ehci 7d008000.usb: EHCI Host Controller [ 2.909570] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 2.918091] tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 [ 2.928833] mmc1: new high speed MMC card at address 0001 [ 2.934672] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 2.944047] mmcblk1: mmc1:0001 SEM32G 29.1 GiB [ 2.945004] hub 1-0:1.0: USB hub found [ 2.945166] hub 1-0:1.0: 1 port detected [ 2.951686] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 2.957328] tegra-dsi 54300000.dsi: cannot get VDD supply [ 2.963186] input: gpio-keys as /devices/soc0/gpio-keys/input/input0 [ 2.969744] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 2.974704] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 2.976241] tegra-dsi 54300000.dsi: cannot get VDD supply [ 2.999703] mmcblk1boot0: mmc1:0001 SEM32G partition 1 4.00 MiB [ 3.008559] mmcblk1boot1: mmc1:0001 SEM32G partition 2 4.00 MiB [ 3.016615] mmcblk1rpmb: mmc1:0001 SEM32G partition 3 4.00 MiB [ 3.019743] vdd_hdmi_5v0: disabling [ 3.025503] dvdd_ts: disabling [ 3.025521] usb1_vbus: disabling [ 3.025540] vdd_cam_1v8_reg: disabling [ 3.025554] VDD_5V0_HDMI_CON: disabling [ 3.044180] mmcblk1: p1 [ 3.055804] Waiting for root device /dev/mmcblk0p1... [ 3.059441] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 3.065438] tegra-dsi 54300000.dsi: cannot get VDD supply [ 3.251744] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 4.234658] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f [ 4.250033] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 4.262060] tegra-dsi 54300000.dsi: cannot get VDD supply
[PYBOOT] [dalmore 02:01]: Timed out waiting for "<type 'str'>":
[PYBOOT] [dalmore 02:02]: got exception: timeout ~$off
[PYBOOT] [dalmore 02:03]: Done. Board dalmore-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 2.849084] usb2_vbus: supplied by vdd-sys-5v0 [ 2.866340] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 2.878018] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 2.890305] tegra-dsi 54300000.dsi: cannot get VDD supply [ 2.906801] tegra-ehci 7d008000.usb: EHCI Host Controller [ 2.912450] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 2.919338] mmc1: new high speed MMC card at address 0001 [ 2.923703] mmcblk1: mmc1:0001 SEM32G 29.1 GiB [ 2.925492] mmcblk1boot0: mmc1:0001 SEM32G partition 1 4.00 MiB [ 2.926395] mmcblk1boot1: mmc1:0001 SEM32G partition 2 4.00 MiB [ 2.927908] mmcblk1rpmb: mmc1:0001 SEM32G partition 3 4.00 MiB [ 2.934885] mmcblk1: p1 [ 2.951952] tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 [ 2.966918] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 2.977555] hub 1-0:1.0: USB hub found [ 2.981707] hub 1-0:1.0: 1 port detected [ 2.991729] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 3.003624] tegra-dsi 54300000.dsi: cannot get VDD supply [ 3.014842] input: gpio-keys as /devices/soc0/gpio-keys/input/input0 [ 3.027908] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 3.034122] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 3.049934] tegra-dsi 54300000.dsi: cannot get VDD supply [ 3.073965] vdd_hdmi_5v0: disabling [ 3.087879] dvdd_ts: disabling [ 3.090990] usb1_vbus: disabling [ 3.094396] vdd_cam_1v8_reg: disabling [ 3.098221] VDD_5V0_HDMI_CON: disabling [ 3.105641] Waiting for root device /dev/mmcblk0p1... [ 3.296887] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 4.274417] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f [ 4.290170] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 4.302038] tegra-dsi 54300000.dsi: cannot get VDD supply
[PYBOOT] [dalmore 01:53]: Timed out waiting for "<type 'str'>": [ 82.591861] random: nonblocking pool is initialized
[PYBOOT] [dalmore 01:54]: got exception: timeout ~$off
[PYBOOT] [dalmore 01:55]: Done. Board dalmore-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 tegra-hdmi 54280000.hdmi: failed to get PLL regulator tegra-dsi 54300000.dsi: cannot get VDD supply tegra-ehci 7d008000.usb: EHCI Host Controller tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 hub 1-0:1.0: USB hub found hub 1-0:1.0: 1 port detected tegra-hdmi 54280000.hdmi: failed to get PLL regulator tegra-dsi 54300000.dsi: cannot get VDD supply input: gpio-keys as /devices/soc0/gpio-keys/input/input0 tegra-hdmi 54280000.hdmi: failed to get PLL regulator tegra-dsi 54300000.dsi: cannot get VDD supply palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) vdd_hdmi_5v0: disabling mmc1: new high speed MMC card at address 0001 dvdd_ts: disabling usb1_vbus: disabling vdd_cam_1v8_reg: disabling VDD_5V0_HDMI_CON: disabling mmcblk1: mmc1:0001 SEM32G 29.1 GiB mmcblk1boot0: mmc1:0001 SEM32G partition 1 4.00 MiB mmcblk1boot1: mmc1:0001 SEM32G partition 2 4.00 MiB mmcblk1rpmb: mmc1:0001 SEM32G partition 3 4.00 MiB mmcblk1: p1 tegra-hdmi 54280000.hdmi: failed to get PLL regulator tegra-dsi 54300000.dsi: cannot get VDD supply Waiting for root device /dev/mmcblk0p1... usb 1-1: new high-speed USB device number 2 using tegra-ehci asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f tegra-hdmi 54280000.hdmi: failed to get PLL regulator tegra-dsi 54300000.dsi: cannot get VDD supply
[PYBOOT] [dalmore 01:51]: Timed out waiting for "<type 'str'>":
[PYBOOT] [dalmore 01:52]: got exception: timeout ~$off
[PYBOOT] [dalmore 01:53]: Done. Board dalmore-arm-tegra_defconfig failure log: -------------------------------------------------
[ 5.524029] Key type dns_resolver registered [ 5.533519] Registering SWP/SWPB emulation handler [ 5.549624] usb1_vbus: supplied by vdd-sys-5v0 [ 5.557536] usb2_vbus: supplied by vdd-sys-5v0 [ 5.572901] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 5.581098] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 5.589350] tegra-dsi 54300000.dsi: cannot get VDD supply [ 5.598610] tegra-ehci 7d008000.usb: EHCI Host Controller [ 5.604440] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 5.613426] tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 [ 5.631821] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 5.645959] hub 1-0:1.0: USB hub found [ 5.649923] hub 1-0:1.0: 1 port detected [ 5.660134] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 5.668563] tegra-dsi 54300000.dsi: cannot get VDD supply [ 5.680543] input: gpio-keys as /devices/soc0/gpio-keys/input/input1 [ 5.692335] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 5.698567] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:01 UTC (946684801) [ 5.700687] tegra-dsi 54300000.dsi: cannot get VDD supply [ 5.783498] vdd_hdmi_5v0: disabling [ 5.797403] dvdd_ts: disabling [ 5.800511] usb1_vbus: disabling [ 5.803906] vdd_cam_1v8_reg: disabling [ 5.807688] VDD_5V0_HDMI_CON: disabling [ 5.812419] ALSA device list: [ 5.815416] #0: NVIDIA Tegra Dalmore [ 5.821295] Waiting for root device /dev/mmcblk0p1... [ 5.971823] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 7.005878] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f [ 7.019122] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 7.027486] tegra-dsi 54300000.dsi: cannot get VDD supply [ 7.037732] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 7.045890] tegra-dsi 54300000.dsi: cannot get VDD supply
[PYBOOT] [dalmore 01:51]: Timed out waiting for "<type 'str'>":
[PYBOOT] [dalmore 01:52]: got exception: timeout ~$off
[PYBOOT] [dalmore 01:53]: Done. Board odroidu3-arm-exynos_defconfig failure log: -------------------------------------------------
[ 1.719085] Key type dns_resolver registered [ 1.723378] Registering SWP/SWPB emulation handler [ 1.731305] [drm] Exynos DRM: using 12c10000.mixer device for DMA mapping operations [ 1.735949] exynos-drm exynos-drm: bound 12c10000.mixer (ops mixer_component_ops) [ 1.743345] exynos-drm exynos-drm: bound 12d00000.hdmi (ops hdmi_component_ops) [ 1.750501] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.757127] [drm] No driver support for vblank timestamp query. [ 1.763034] [drm] Initialized exynos 1.0.0 20110530 on minor 0 [ 1.769377] s3c-rtc 10070000.rtc: rtc disabled, re-enabling [ 1.774575] s3c-rtc 10070000.rtc: rtc core: registered s3c as rtc1 [ 1.781551] usb 1-3: New USB device found, idVendor=0424, idProduct=3503 [ 1.787189] usb 1-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.787218] mmc_host mmc1: Bus speed (slot 0) = 44000000Hz (slot req 52000000Hz, actual 44000000HZ div = 0) [ 1.804146] mmc_host mmc1: Bus speed (slot 0) = 73333333Hz (slot req 52000000Hz, actual 36666666HZ div = 1) [ 1.805061] hub 1-3:1.0: USB hub found [ 1.805188] hub 1-3:1.0: 3 ports detected [ 1.806800] max98090 1-0010: MAX98090 REVID=0x43 [ 1.809110] max98090 1-0010: use default 2.8v micbias [ 1.831425] mmc1: new DDR MMC card at address 0001 [ 1.835601] asoc-simple-card sound: HiFi <-> 3830000.i2s mapping ok [ 1.839327] input: gpio_keys as /devices/platform/gpio_keys/input/input0 [ 1.849398] mmcblk1: mmc1:0001 008G92 7.28 GiB [ 1.853548] mmcblk1boot0: mmc1:0001 008G92 partition 1 4.00 MiB [ 1.859171] max77686-rtc max77686-rtc: setting system clock to 2000-01-01 01:00:20 UTC (946688420) [ 1.868454] mmcblk1boot1: mmc1:0001 008G92 partition 2 4.00 MiB [ 1.874329] mmcblk1rpmb: mmc1:0001 008G92 partition 3 512 KiB [ 1.880184] VDD10_HDMI_1.0V: disabling [ 1.884012] mmcblk1: p1 p2 [ 1.884202] vdd_g3d: disabling [ 1.884864] BUCK8_2.8V: disabling [ 1.886c01] ALSA device list: [ 1.886306] #0: Odroid-U3 [ 1.901437] Waiting for root device /dev/mmcblk0p2...
[PYBOOT] [odroidu3 01:56]: Timed out waiting for "<type 'str'>":
[PYBOOT] [odroidu3 01:57]: got exception: timeout ~$off
[PYBOOT] [odroidu3 01:58]: Done. Board omap5uevm-arm-multi_lpae_defconfig failure log: -------------------------------------------------
[ 1.845866] omap_vc_init_channel: No PMIC info for vdd_mm [ 1.851513] omap_vp_init: No PMIC info for vdd_mm [ 1.856434] omap_vc_init_channel: No PMIC info for vdd_mpu [ 1.862171] omap_vp_init: No PMIC info for vdd_mpu [ 1.867256] Power Management for TI OMAP4+ devices. [ 1.872472] ThumbEE CPU extension supported. [ 1.876965] Registering SWP/SWPB emulation handler [ 1.885029] palmas 0-0048: Irq flag is 0x00000000 [ 1.911236] palmas 0-0048: Muxing GPIO 2, PWM 0, LED 0 [ 1.921917] palmas-rtc 48070000.i2c:palmas@48:rtc: rtc core: registered 48070000.i2c:palmas as rtc0 [ 1.933284] mmc0: new high speed MMC card at address 0001 [ 1.939339] mmcblk0: mmc0:0001 SEM04G 3.69 GiB [ 1.944257] mmcblk0boot0: mmc0:0001 SEM04G partition 1 2.00 MiB [ 1.950675] mmcblk0boot1: mmc0:0001 SEM04G partition 2 2.00 MiB [ 1.959337] smps6: Bringing 1350000uV into 1200000-1200000uV [ 1.969546] smps9: Bringing 0uV into 2100000-2100000uV [ 1.976157] smps10_out2: failed to get the current voltage(-22) [ 1.982375] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 1.994607] palmas-pmic: probe of 48070000.i2c:palmas@48:palmas_pmic failed with error -22 [ 2.005513] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 2.021462] smsc95xx v1.0.4 [ 2.029348] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 2.035768] omap-dwc3 4a020000.omap_dwc3: vbus init failed [ 2.055421] palmas-rtc 48070000.i2c:palmas@48:rtc: setting system clock to 2000-01-01 00:02:25 UTC (946684945) [ 2.071133] pbias_mmc_omap5: disabling [ 2.075082] vmmcsdio_fixed: disabling [ 2.078131] smsc95xx 1-3:1.0 eth0: register 'smsc95xx' at usb-4a064c00.ehci-3, smsc95xx USB 2.0 Ethernet, 5a:53:e8:ce:18:98 [ 2.079179] omap-dwc3 4a020000.omap_dwc3: vbus init failed [ 2.104696] Waiting for root device /dev/mmcblk1p2... [ 2.303583] usb 1-2: new high-speed USB device number 3 using ehci-omap [ 2.439417] hub 1-2:1.0: USB hub found [ 2.443427] hub 1-2:1.0: 3 ports detected [ 2.449186] omap-dwc3 4a020000.omap_dwc3: vbus init failed
[PYBOOT] [omap5uevm 02:09]: Timed out waiting for "<type 'str'>":
[PYBOOT] [omap5uevm 02:10]: got exception: timeout ~$off
[PYBOOT] [omap5uevm 02:11]: Done. Board omap5uevm-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.840759] omap_vp_init: No PMIC info for vdd_core [ 1.845861] omap_vc_init_channel: No PMIC info for vdd_mm [ 1.851502] omap_vp_init: No PMIC info for vdd_mm [ 1.856421] omap_vc_init_channel: No PMIC info for vdd_mpu [ 1.862159] omap_vp_init: No PMIC info for vdd_mpu [ 1.867259] Power Management for TI OMAP4+ devices. [ 1.872479] ThumbEE CPU extension supported. [ 1.876963] Registering SWP/SWPB emulation handler [ 1.885023] palmas 0-0048: Irq flag is 0x00000000 [ 1.901445] smsc95xx v1.0.4 [ 1.911260] palmas 0-0048: Muxing GPIO 2, PWM 0, LED 0 [ 1.922038] palmas-rtc 48070000.i2c:palmas@48:rtc: rtc core: registered 48070000.i2c:palmas as rtc0 [ 1.933309] mmc0: new high speed MMC card at address 0001 [ 1.939387] mmcblk0: mmc0:0001 SEM04G 3.69 GiB [ 1.944324] mmcblk0boot0: mmc0:0001 SEM04G partition 1 2.00 MiB [ 1.950708] mmcblk0boot1: mmc0:0001 SEM04G partition 2 2.00 MiB [ 1.959556] smps6: Bringing 1350000uV into 1200000-1200000uV [ 1.969746] smps9: Bringing 0uV into 2100000-2100000uV [ 1.976413] smps10_out2: failed to get the current voltage(-22) [ 1.982634] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 1.994867] palmas-pmic: probe of 48070000.i2c:palmas@48:palmas_pmic failed with error -22 [ 2.005772] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 2.014841] smsc95xx 1-3:1.0 eth0: register 'smsc95xx' at usb-4a064c00.ehci-3, smsc95xx USB 2.0 Ethernet, 3a:b9:e9:cb:e5:16 [ 2.027420] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 2.033834] omap-dwc3 4a020000.omap_dwc3: vbus init failed [ 2.055435] palmas-rtc 48070000.i2c:palmas@48:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 2.071134] pbias_mmc_omap5: disabling [ 2.075078] vmmcsdio_fixed: disabling [ 2.079622] Waiting for root device /dev/mmcblk1p2... [ 2.253593] usb 1-2: new high-speed USB device number 3 using ehci-omap [ 2.389396] hub 1-2:1.0: USB hub found [ 2.393407] hub 1-2:1.0: 3 ports detected [ 2.399158] omap-dwc3 4a020000.omap_dwc3: vbus init failed
[PYBOOT] [omap5uevm 02:07]: Timed out waiting for "<type 'str'>":
[PYBOOT] [omap5uevm 02:08]: got exception: timeout ~$off
[PYBOOT] [omap5uevm 02:10]: Done. Board omap5uevm-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
omap_vc_init_channel: No PMIC info for vdd_mm omap_vp_init: No PMIC info for vdd_mm omap_vc_init_channel: No PMIC info for vdd_mpu omap_vp_init: No PMIC info for vdd_mpu Power Management for TI OMAP4+ devices. ThumbEE CPU extension supported. usb 1-3: new high-speed USB device number 2 using ehci-omap palmas 0-0048: Irq flag is 0x00000000 palmas 0-0048: Muxing GPIO 2, PWM 0, LED 0 palmas-rtc 48070000.i2c:palmas@48:rtc: rtc core: registered 48070000.i2c:palmas as rtc0 smps6: Bringing 1350000uV into 1200000-1200000uV smps9: Bringing 0uV into 2100000-2100000uV smps10_out2: failed to get the current voltage(-22) palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator palmas-pmic: probe of 48070000.i2c:palmas@48:palmas_pmic failed with error -22 mmc0: new high speed MMC card at address 0001 omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz mmcblk0: mmc0:0001 SEM04G 3.69 GiB mmcblk0boot0: mmc0:0001 SEM04G partition 1 2.00 MiB mmcblk0boot1: mmc0:0001 SEM04G partition 2 2.00 MiB omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz omap-dwc3 4a020000.omap_dwc3: vbus init failed palmas-rtc 48070000.i2c:palmas@48:rtc: setting system clock to 2000-01-01 00:04:42 UTC (946685082) pbias_mmc_omap5: disabling vmmcsdio_fixed: disabling smsc95xx v1.0.4 smsc95xx 1-3:1.0 eth0: register 'smsc95xx' at usb-4a064c00.ehci-3, smsc95xx USB 2.0 Ethernet, a2:2e:03:0f:11:82 omap-dwc3 4a020000.omap_dwc3: vbus init failed Waiting for root device /dev/mmcblk1p2... usb 1-2: new high-speed USB device number 3 using ehci-omap hub 1-2:1.0: USB hub found hub 1-2:1.0: 3 ports detected omap-dwc3 4a020000.omap_dwc3: vbus init failed
[PYBOOT] [omap5uevm 02:02]: Timed out waiting for "<type 'str'>":
[PYBOOT] [omap5uevm 02:03]: got exception: timeout ~$off
[PYBOOT] [omap5uevm 02:04]: Done. Board omap5uevm-arm-omap2plus_defconfig failure log: -------------------------------------------------
[ 3.833226] palmas 0-0048: Irq flag is 0x00000000 [ 3.862504] palmas 0-0048: Muxing GPIO 2, PWM 0, LED 0 [ 3.877713] smps6: Bringing 1350000uV into 1200000-1200000uV [ 3.891551] smps9: Bringing 0uV into 2100000-2100000uV [ 3.899201] smps10_out2: failed to get the current voltage(-22) [ 3.905416] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 3.921193] palmas-pmic: probe of 48070000.i2c:palmas@48:palmas_pmic failed with error -22 [ 3.932770] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 3.940384] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 3.946919] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer cd [ 3.953243] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 3.960120] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/ocp/mmc@4809c000[0]' [ 3.969728] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/ocp/mmc@4809c000[0]' [ 3.979231] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 3.986269] omap_hsmmc 4809c000.mmc: lookup for GPIO cd failed [ 3.992417] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer wp [ 3.998741] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 4.005580] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@4809c000[0]' [ 4.015174] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@4809c000[0]' [ 4.024680] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 4.031724] omap_hsmmc 4809c000.mmc: lookup for GPIO wp failed [ 4.078348] omap_hsmmc 480ad000.mmc: GPIO lookup for consumer wp [ 4.084642] omap_hsmmc 480ad000.mmc: using device tree for GPIO lookup [ 4.091517] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@480ad000[0]' [ 4.101109] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@480ad000[0]' [ 4.110618] omap_hsmmc 480ad000.mmc: using lookup tables for GPIO lookup [ 4.117664] omap_hsmmc 480ad000.mmc: lookup for GPIO wp failed [ 4.125524] hctosys: unable to open rtc device (rtc0) [ 4.130841] sr_init: No PMIC hook to init smartreflex [ 4.136323] sr_init: platform driver register failed for SR [ 4.164965] pbias_mmc_omap5: disabling [ 4.168927] vmmcsdio_fixed: disabling [ 4.175032] Waiting for root device /dev/mmcblk1p2...
[PYBOOT] [omap5uevm 02:03]: Timed out waiting for "<type 'str'>":
[PYBOOT] [omap5uevm 02:04]: got exception: timeout ~$off
[PYBOOT] [omap5uevm 02:05]: Done. Board seaboard-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.913718] tegra-dc 54200000.dc: failed to probe RGB output: -517 [ 1.924848] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 1.931309] tegra-ehci c5000000.usb: EHCI Host Controller [ 1.936889] tegra-ehci c5000000.usb: new USB bus registered, assigned bus number 3 [ 1.944795] tegra-ehci c5000000.usb: irq 287, io mem 0xc5000000 [ 1.956581] tegra-ehci c5000000.usb: USB 2.0 started, EHCI 1.00 [ 1.963502] hub 3-0:1.0: USB hub found [ 1.968394] hub 3-0:1.0: 1 port detected [ 1.978314] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.984961] [drm] No driver support for vblank timestamp query. [ 2.029926] mmc0: queuing unknown CIS tuple 0x80 (50 bytes) [ 2.034782] mmc2: switch to bus width 8 failed [ 2.035070] mmc2: switch to bus width 4 failed [ 2.035086] mmc2: new high speed MMC card at address 0001 [ 2.035651] mmcblk2: mmc2:0001 MMC08G 7.46 GiB [ 2.035860] mmcblk2boot0: mmc2:0001 MMC08G partition 1 512 KiB [ 2.036061] mmcblk2boot1: mmc2:0001 MMC08G partition 2 512 KiB [ 2.037430] mmcblk2: p3 [ 2.038052] mmc0: queuing unknown CIS tuple 0x80 (7 bytes) [ 2.040931] mmc0: queuing unknown CIS tuple 0x80 (7 bytes) [ 2.048263] mmc0: queuing unknown CIS tuple 0x80 (19 bytes) [ 2.080008] Console: switching to colour frame buffer device 170x48 [ 2.159141] drm drm: fb0: frame buffer device [ 2.163946] mmc0: queuing unknown CIS tuple 0x02 (1 bytes) [ 2.173453] mmc0: new SDIO card at address 0001 [ 2.181583] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 2.188349] input: gpio-keys as /devices/soc0/gpio-keys/input/input2 [ 2.195412] tps6586x-rtc tps6586x-rtc: setting system clock to 2009-01-01 00:00:00 UTC (1230768000) [ 2.209683] vdd_1v5: disabling [ 2.212767] vdd_1v2: disabling [ 2.809750] asix 2-1:1.0 eth0: register 'asix' at usb-c5008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, c0:c1:c0:13:08:60 [ 2.821170] Waiting for root device /dev/mmcblk0p3... [ 57.923796] random: nonblocking pool is initialized
[PYBOOT] [seaboard 02:00]: Timed out waiting for "<type 'str'>":
[PYBOOT] [seaboard 02:01]: got exception: timeout ~$off
[PYBOOT] [seaboard 02:02]: Done. Board seaboard-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
VDDIO_HDMI: supplied by vdd_5v0 tegra-dc 54200000.dc: failed to probe RGB output: -517 utmi_phy_clk_enable: timeout waiting for phy to stabilize tegra-ehci c5000000.usb: EHCI Host Controller tegra-ehci c5000000.usb: new USB bus registered, assigned bus number 3 tegra-ehci c5000000.usb: irq 287, io mem 0xc5000000 tegra-ehci c5000000.usb: USB 2.0 started, EHCI 1.00 hub 3-0:1.0: USB hub found hub 3-0:1.0: 1 port detected [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [drm] No driver support for vblank timestamp query. mmc2: switch to bus width 8 failed mmc2: switch to bus width 4 failed mmc2: new high speed MMC card at address 0001 mmcblk2: mmc2:0001 MMC08G 7.46 GiB mmcblk2boot0: mmc2:0001 MMC08G partition 1 512 KiB mmcblk2boot1: mmc2:0001 MMC08G partition 2 512 KiB mmcblk2: p3 Console: switching to colour frame buffer device 170x48 drm drm: fb0: frame buffer device mmc0: queuing unknown CIS tuple 0x80 (50 bytes) [drm] Initialized tegra 0.0.0 20120330 on minor 0 input: gpio-keys as /devices/soc0/gpio-keys/input/input2 tps6586x-rtc tps6586x-rtc: setting system clock to 2009-01-01 00:00:00 UTC (1230768000) vdd_1v5: disabling vdd_1v2: disabling mmc0: queuing unknown CIS tuple 0x80 (7 bytes) mmc0: queuing unknown CIS tuple 0x80 (7 bytes) mmc0: queuing unknown CIS tuple 0x80 (19 bytes) mmc0: queuing unknown CIS tuple 0x02 (1 bytes) mmc0: new SDIO card at address 0001 asix 2-1:1.0 eth0: register 'asix' at usb-c5008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, c0:c1:c0:13:08:60 Waiting for root device /dev/mmcblk0p3...
[PYBOOT] [seaboard 01:47]: Timed out waiting for "<type 'str'>":
[PYBOOT] [seaboard 01:48]: got exception: timeout ~$off
[PYBOOT] [seaboard 01:49]: Done. Board seaboard-arm-tegra_defconfig failure log: -------------------------------------------------
[ 4.414509] can: raw protocol (rev 20120528) [ 4.418787] can: broadcast manager protocol (rev 20120528 t) [ 4.424509] can: netlink gateway (rev 20130117) max_hops=1 [ 4.460025] Bluetooth: RFCOMM socket layer initialized [ 4.465192] Bluetooth: RFCOMM ver 1.11 [ 4.468959] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 4.474342] Bluetooth: BNEP socket layer initialized [ 4.479302] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.485273] Bluetooth: HIDP socket layer initialized [ 4.491031] Key type dns_resolver registered [ 4.496760] Registering SWP/SWPB emulation handler [ 4.513381] VDDIO_HDMI: supplied by vdd_5v0 [ 4.519441] tegra-dc 54200000.dc: failed to probe RGB output: -517 [ 4.531446] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 4.537922] tegra-ehci c5000000.usb: EHCI Host Controller [ 4.543424] tegra-ehci c5000000.usb: new USB bus registered, assigned bus number 3 [ 4.551832] tegra-ehci c5000000.usb: irq 287, io mem 0xc5000000 [ 4.569765] tegra-ehci c5000000.usb: USB 2.0 started, EHCI 1.00 [ 4.579535] hub 3-0:1.0: USB hub found [ 4.583426] hub 3-0:1.0: 1 port detected [ 4.597956] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 4.604644] [drm] No driver support for vblank timestamp query. [ 4.700167] Console: switching to colour frame buffer device 170x48 [ 4.717754] asix 2-1:1.0 eth0: register 'asix' at usb-c5008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, c0:c1:c0:13:08:60 [ 4.746592] drm drm: fb0: frame buffer device [ 4.779776] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 4.787843] input: gpio-keys as /devices/soc0/gpio-keys/input/input4 [ 4.796053] tps6586x-rtc tps6586x-rtc: setting system clock to 2009-01-01 00:00:01 UTC (1230768001) [ 4.815483] vdd_1v5: disabling [ 4.818536] vdd_1v2: disabling [ 4.821709] ALSA device list: [ 4.824682] #0: NVIDIA Tegra Seaboard [ 4.829166] Waiting for root device /dev/mmcblk0p3...
[PYBOOT] [seaboard 01:51]: Timed out waiting for "<type 'str'>":
[PYBOOT] [seaboard 01:52]: got exception: timeout ~$off
[PYBOOT] [seaboard 01:54]: Done. Board snow-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
root@snow:~# cat /proc/cmdline cat /proc/cmdline console=ttySAC3,115200 earlyprintk debug root=/dev/mmcblk0p3 rootwait root@snow:~# uname -r uname Unable to handle kernel paging request at virtual address ee7a8700 pgd = c0204000 [ee7a8700] *pgd=6e60041e(bad) Internal error: Oops: 8000000d [#1] ARM Modules linked in: CPU: 0 PID: 0 Comm: swapper Tainted: G W 4.6.0-rc5-next-20160426-00187-g22a4aa3 #1 Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) task: c1005f30 ti: c1000000 task.ti: c1000000 PC is at 0xee7a8700 LR is at cpu_init+0x14/0x54 pc : [<ee7a8700>] lr : [<c0309fa0>] psr: 000001d3 sp : c1001f50 ip : 00000000 fp : 00000000 r10: c1035b18 r9 : c1005f30 r8 : 8b7a6c3a r7 : 00000001 r6 : c10b40c0 r5 : ee7a8700 r4 : c1136b8c r3 : c030d820 r2 : 00cf9974 r1 : 6e07c059 r0 : 00000000 Flags: nzcv IRQs off FIQs off Mode SVC_32 ISA ARM Segment none Control: 10c53c7d Table: 6e07c059 DAC: 00000051 Process swapper (pid: 0, stack limit = 0xc1000218) Stack: (0xc1001f50 to 0xc1002000) 1f40: c10fdf95 c034e090 00000000 c1035b18 1f60: c100615c c030c590 c1039780 6e51b0df 00000001 c10fdf95 c10fdf95 c1000000 1f80: c100212c c10b3560 c1002134 c10fdf95 c1001fa4 c0a95914 ffffffff c1000000 1fa0: c1001fac c0a95b14 c10b4020 c0357edc 00000001 ffffffff 00000000 c0f00c44 1fc0: ffffffff ffffffff 00000000 c0f0068c 00000000 c0f8ba20 c11001d4 c10020b4 1fe0: c0f8ba1c c10070f8 40204059 410fc0f4 00000000 40208078 00000000 00000000 [<c0309fa0>] (cpu_init) from [<c034e090>] (atomic_notifier_call_chain+0x18/0x20) [<c034e090>] (atomic_notifier_call_chain) from [<c030c590>] (__switch_to+0x34/0x64) Code: 00000000 00000000 00000000 00000000 (ed2502c0) ---[ end trace cb88537fdc8fa202 ]--- Kernel panic - not syncing: Attempted to kill the idle task! ---[ end Kernel panic - not syncing: Attempted to kill the idle task!
[PYBOOT] [snow 01:46]: got exception: ERROR: Timeout waiting for command: uname -r. ~$off
[PYBOOT] [snow 01:48]: Done. Board snowball-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.974731] can: controller area network core (rev 20120528 abi 9) [ 1.981048] NET: Registered protocol family 29 [ 1.985534] can: raw protocol (rev 20120528) [ 1.989807] can: broadcast manager protocol (rev 20120528 t) [ 1.995513] can: netlink gateway (rev 20130117) max_hops=1 [ 2.001892] Key type dns_resolver registered [ 2.006500] ThumbEE CPU extension supported. [ 2.010803] Registering SWP/SWPB emulation handler [ 2.023193] input: gpio_keys as /devices/soc0/gpio_keys/input/input0 [ 2.030364] rtc-pl031 80154000.rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 2.039886] thermal cooling_device0: thermal-cpufreq-0 bind to 0: 0-succeed [ 2.046966] thermal cooling_device0: thermal-cpufreq-0 bind to 1: 0-succeed [ 2.053985] thermal cooling_device0: thermal-cpufreq-0 bind to 2: 0-succeed [ 2.061004] db8500-cpufreq-cooling soc:cpufreq-cooling: Cooling device registered: thermal-cpufreq-0 [ 2.078216] db8500-esram12: disabling [ 2.082061] db8500-esram34: disabling [ 2.086212] V-CSI/DSI: disabling [ 2.090606] mmci-reg: disabling [ 2.096618] uart-pl011 80007000.uart: DMA channel TX dma0chan20 [ 2.102630] uart-pl011 80007000.uart: DMA channel RX dma0chan21 [ 2.109313] Waiting for root device /dev/mmcblk0p4... [ 2.142395] mmc3: new high speed MMC card at address 0001 [ 2.148773] mmcblk3: mmc3:0001 3.53 GiB [ 2.153137] mmcblk3boot0: mmc3:0001 partition 1 2.00 MiB [ 2.158996] mmcblk3boot1: mmc3:0001 partition 2 2.00 MiB [ 2.164825] mmcblk3rpmb: mmc3:0001 partition 3 128 KiB [ 2.171783] mmcblk3: p1 p2 p3 p4 cu: Got hangup signal Connected. cu: waitpid: No child processes Connected.
Disconnected.
[PYBOOT] [snowball 02:15]: Timed out waiting for "<type 'str'>":
[PYBOOT] [snowball 02:16]: got exception: timeout ~$off
[PYBOOT] [snowball 02:17]: Done. Board snowball-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
sdhci-pltfm: SDHCI platform and OF driver helper ledtrig-cpu: registered to indicate activity on CPUs usbcore: registered new interface driver usbhid usbhid: USB HID core driver NET: Registered protocol family 10 sit: IPv6 over IPv4 tunneling driver NET: Registered protocol family 17 can: controller area network core (rev 20120528 abi 9) NET: Registered protocol family 29 can: raw protocol (rev 20120528) can: broadcast manager protocol (rev 20120528 t) can: netlink gateway (rev 20130117) max_hops=1 Key type dns_resolver registered ThumbEE CPU extension supported. input: gpio_keys as /devices/soc0/gpio_keys/input/input0 rtc-pl031 80154000.rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) thermal cooling_device0: thermal-cpufreq-0 bind to 0: 0-succeed thermal cooling_device0: thermal-cpufreq-0 bind to 1: 0-succeed thermal cooling_device0: thermal-cpufreq-0 bind to 2: 0-succeed db8500-cpufreq-cooling soc:cpufreq-cooling: Cooling device registered: thermal-cpufreq-0 db8500-esram12: disabling db8500-esram34: disabling V-CSI/DSI: disabling mmci-reg: disabling uart-pl011 80007000.uart: DMA channel TX dma0chan20 uart-pl011 80007000.uart: DMA channel RX dma0chan21 Waiting for root device /dev/mmcblk0p4... mmc3: new high speed MMC card at address 0001 mmcblk3: mmc3:0001 3.53 GiB mmcblk3boot0: mmc3:0001 partition 1 2.00 MiB mmcblk3boot1: mmc3:0001 partition 2 2.00 MiB mmcblk3rpmb: mmc3:0001 partition 3 128 KiB mmcblk3: p1 p2 p3 p4
[PYBOOT] [snowball 01:58]: Timed out waiting for "<type 'str'>":
[PYBOOT] [snowball 01:59]: got exception: timeout ~$off
[PYBOOT] [snowball 02:00]: Done. Board snowball-arm-u8500_defconfig failure log: -------------------------------------------------
[ 2.542724] iio iio:device0: registered gyroscope l3g4200d [ 2.551361] iio iio:device1: lsm303dlh_magn: WhoAmI mismatch (0x3c). [ 2.558074] st-magn-i2c: probe of 2-001e failed with error -22 [ 2.566833] iio iio:device1: Full-scale not possible [ 2.574188] iio iio:device1: registered pressure sensor lps001wp [ 2.592071] coresight-etm3x 801ae000.ptm: PTM 1.0 initialized [ 2.599700] coresight-etm3x 801af000.ptm: PTM 1.0 initialized [ 2.633941] ux500-msp-i2s ux500-msp-i2s.1: Failed to get DMA channel capabilities, falling back to period counting: -6 [ 2.644989] snd-soc-mop500 snd-soc-mop500.0: ab8500-codec-dai.0 <-> ux500-msp-i2s.1 mapping ok [ 2.660827] ux500-msp-i2s ux500-msp-i2s.3: Failed to get DMA channel capabilities, falling back to period counting: -6 [ 2.671691] snd-soc-mop500 snd-soc-mop500.0: ab8500-codec-dai.1 <-> ux500-msp-i2s.3 mapping ok [ 2.708618] NET: Registered protocol family 10 [ 2.716247] sit: IPv6 over IPv4 tunneling driver [ 2.723785] NET: Registered protocol family 17 [ 2.728363] NET: Registered protocol family 35 [ 2.733520] NET: Registered protocol family 37 [ 2.738281] Registering SWP/SWPB emulation handler [ 2.757843] input: gpio_keys as /devices/soc0/gpio_keys/input/input1 [ 2.770416] ab8500-rtc ab8500-rtc.0: setting system clock to 2000-04-07 09:37:03 UTC (955100223) [ 2.779724] thermal cooling_device0: thermal-cpufreq-0 bind to 0: 0-succeed [ 2.786804] thermal cooling_device0: thermal-cpufreq-0 bind to 1: 0-succeed [ 2.793823] thermal cooling_device0: thermal-cpufreq-0 bind to 2: 0-succeed [ 2.800842] db8500-cpufreq-cooling soc:cpufreq-cooling: Cooling device registered: thermal-cpufreq-0 [ 2.815124] db8500-esram12: disabling [ 2.818878] db8500-esram34: disabling [ 2.822845] V-CSI/DSI: disabling [ 2.826141] mmci-reg: disabling [ 2.829437] ALSA device list: [ 2.832427] #0: MOP500-card [ 2.835754] uart-pl011 80007000.uart: DMA channel TX dma0chan24 [ 2.841766] uart-pl011 80007000.uart: DMA channel RX dma0chan25 [ 2.847991] Waiting for root device /dev/mmcblk0p4... [ 79.130523] random: nonblocking pool is initialized
[PYBOOT] [snowball 01:53]: Timed out waiting for "<type 'str'>":
[PYBOOT] [snowball 01:54]: got exception: timeout ~$off
[PYBOOT] [snowball 01:55]: Done.