Full logs are available at http://arm-soc.lixom.net/bootlogs/mainline/v4.6-rc6-117-g41143b7/
Failed boards:
arndale arm-multi_v7_nosmp_defconfig : FAILED 16:28.23 bbb arm-omap2plus_defconfig : FAILED 1:54.80 bbb arm-multi_v7_defconfig : FAILED 1:54.88 bbb arm-multi_v7_nosmp_defconfig : FAILED 2:10.39 beagleboard-x15 arm-omap2plus_defconfig : FAILED 1:44.31 beagleboard-x15 arm-multi_v7_defconfig : FAILED 1:46.52 beagleboard-x15 arm-multi_lpae_defconfig : FAILED 1:53.40 beagleboard-x15 arm-multi_v7_nosmp_defconfig : FAILED 1:57.59 chitra powerpc-pasemi_defconfig : BUILD FAILED colombus arm-multi_v7_nosmp_defconfig : FAILED 3:20.65 cosmic arm-imx_v6_v7_defconfig : FAILED 2:01.45 cosmic arm-multi_v7_defconfig : FAILED 2:06.15 cosmic arm-multi_v7_nosmp_defconfig : FAILED 2:02.71 dalmore arm-tegra_defconfig : FAILED 2:56.46 dalmore arm-multi_v7_defconfig : FAILED 2:06.32 dalmore arm-multi_lpae_defconfig : FAILED 1:57.79 dalmore arm-multi_v7_nosmp_defconfig : FAILED 1:51.54 minnowmax minnowmax_defconfig : NO BUILD odroidu3 arm-exynos_defconfig : FAILED 1:53.50 omap5uevm arm-multi_v7_defconfig : FAILED 2:10.26 omap5uevm arm-multi_lpae_defconfig : FAILED 0:51.18 omap5uevm arm-multi_v7_nosmp_defconfig : FAILED 1:44.11 seaboard arm-tegra_defconfig : FAILED 1:50.54 seaboard arm-multi_v7_defconfig : FAILED 2:08.51 seaboard arm-multi_v7_nosmp_defconfig : FAILED 1:53.48 snow arm-multi_v7_nosmp_defconfig : FAILED 3:13.76 snowball arm-u8500_defconfig : FAILED 1:56.71 snowball arm-multi_v7_defconfig : FAILED 2:23.34 snowball arm-multi_v7_nosmp_defconfig : FAILED 2:00.70 wandboard arm-imx_v6_v7_defconfig : FAILED 2:58.19
Successful boards:
apc arm-vt8500_v6_v7_defconfig : passed 1:17.32 arndale arm-exynos_defconfig : passed 1:28.46 arndale arm-multi_v7_defconfig : passed 1:18.88 arndale arm-multi_lpae_defconfig : passed 1:34.75 capri arm-bcm_defconfig : passed 0:47.03 capri arm-multi_v7_defconfig : passed 1:01.71 capri arm-multi_v7_nosmp_defconfig : warnings 0:55.82 chitra powerpc-ppc64_defconfig : passed 2:24.05 colombus arm-sunxi_defconfig : passed 2:25.23 colombus arm-multi_v7_defconfig : passed 2:39.04 colombus arm-multi_lpae_defconfig : passed 2:31.42 cubie arm-sunxi_defconfig : passed 0:56.47 cubie arm-multi_v7_defconfig : passed 0:53.24 cubie arm-multi_v7_nosmp_defconfig : passed 1:00.55 cubie2 arm-sunxi_defconfig : passed 0:58.48 cubie2 arm-multi_v7_defconfig : passed 0:54.97 cubie2 arm-multi_lpae_defconfig : passed 2:21.27 cubie2 arm-multi_v7_nosmp_defconfig : warnings 0:59.89 cubox arm-multi_v7_defconfig : passed 1:23.89 cubox arm-mvebu_v7_defconfig : passed 1:12.74 cubox arm-multi_v7_nosmp_defconfig : passed 1:03.72 hummingboard arm-imx_v6_v7_defconfig : passed 1:32.32 hummingboard arm-multi_v7_defconfig : passed 1:19.69 hummingboard arm-multi_v7_nosmp_defconfig : warnings 1:13.00 jetsontk1 arm-tegra_defconfig : passed 1:33.59 jetsontk1 arm-multi_v7_defconfig : passed 1:36.05 jetsontk1 arm-multi_lpae_defconfig : passed 1:55.15 jetsontk1 arm-multi_v7_nosmp_defconfig : warnings 1:45.71 omap5uevm arm-omap2plus_defconfig : passed 1:04.03 pandaes arm-omap2plus_defconfig : warnings 1:41.31 pandaes arm-multi_v7_defconfig : passed 1:49.39 pandaes arm-multi_v7_nosmp_defconfig : warnings 2:12.29 pi arm-exynos_defconfig : passed 2:08.98 pi arm-multi_v7_defconfig : passed 2:12.64 pi arm-multi_lpae_defconfig : passed 2:13.97 pi arm-multi_v7_nosmp_defconfig : warnings 2:10.71 pit arm-exynos_defconfig : passed 2:10.63 pit arm-multi_v7_defconfig : passed 2:10.05 pit arm-multi_lpae_defconfig : passed 2:12.30 pit arm-multi_v7_nosmp_defconfig : warnings 2:10.71 seattle arm64-defconfig : warnings 2:34.76 snow arm-exynos_defconfig : passed 2:07.80 snow arm-multi_v7_defconfig : passed 2:10.73 snow arm-multi_lpae_defconfig : passed 1:59.26 trimslice arm-tegra_defconfig : passed 1:31.25 trimslice arm-multi_v7_defconfig : passed 2:59.92 trimslice arm-multi_v7_nosmp_defconfig : warnings 1:35.78 wandboard arm-multi_v7_defconfig : passed 1:14.64 wandboard arm-multi_v7_nosmp_defconfig : warnings 1:08.13
Offline boards:
beaver arm-tegra_defconfig : OFFLINE 2:12.83 beaver arm-multi_v7_defconfig : OFFLINE 2:27.12 beaver arm-multi_v7_nosmp_defconfig : OFFLINE 2:18.21 colibri-vf61 arm-imx_v6_v7_defconfig : OFFLINE 1:16.68 colibri-vf61 arm-multi_v7_defconfig : OFFLINE 1:16.44 colibri-vf61 arm-multi_v7_nosmp_defconfig : OFFLINE 1:38.81 parallella arm-multi_v7_defconfig : OFFLINE 2:22.77 parallella arm-multi_v7_nosmp_defconfig : OFFLINE 2:16.25 rk3288evb arm-multi_v7_defconfig : OFFLINE 1:10.72 rk3288evb arm-multi_lpae_defconfig : OFFLINE 1:02.71 rk3288evb arm-multi_v7_nosmp_defconfig : OFFLINE 0:42.72 sama5 arm-sama5_defconfig : OFFLINE 2:17.28 sama5d3-xplained arm-sama5_defconfig : OFFLINE 2:24.39 socfpga arm-socfpga_defconfig : OFFLINE 2:27.45 socfpga arm-multi_v7_defconfig : OFFLINE 2:25.31 socfpga arm-multi_v7_nosmp_defconfig : OFFLINE 2:13.83
Board legend is available at http://arm-soc.lixom.net/boards.html
Board arndale-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
[ 0.000000] Machine model: Insignal Arndale evaluation board based on EXYNOS5250 [ 0.000000] cma: Reserved 64 MiB at 0xbc000000 [ 0.000000] Memory policy: Data cache writeback [ 0.000000] Samsung CPU ID: 0x43520010 [ 0.000000] On node 0 totalpages: 520192 [ 0.000000] free_area_init_node: node 0, pgdat c10fd334, node_mem_map eeff7000 [ 0.000000] DMA zone: 1536 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 192512 pages, LIFO batch:31 [ 0.000000] HighMem zone: 327680 pages, LIFO batch:31 [ 0.000000] ------------[ cut here ]------------ [ 0.000000] WARNING: CPU: 0 PID: 0 at /home/build/work/batch/arch/arm/kernel/devtree.c:149 arm_dt_init_cpu_maps+0xf8/0x134 [ 0.000000] DT /cpu 2 nodes greater than max cores 1, capping them [ 0.000000] Modules linked in: [ 0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 4.6.0-rc6-00117-g41143b7 #1 [ 0.000000] Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) [ 0.000000] [<c030e70c>] (unwind_backtrace) from [<c030b298>] (show_stack+0x10/0x14) [ 0.000000] [<c030b298>] (show_stack) from [<c0335fb8>] (__warn+0xe4/0xfc) [ 0.000000] [<c0335fb8>] (__warn) from [<c0336008>] (warn_slowpath_fmt+0x38/0x48) [ 0.000000] [<c0336008>] (warn_slowpath_fmt) from [<c0f04040>] (arm_dt_init_cpu_maps+0xf8/0x134) [ 0.000000] [<c0f04040>] (arm_dt_init_cpu_maps) from [<c0f03368>] (setup_arch+0x780/0x8b8) [ 0.000000] [<c0f03368>] (setup_arch) from [<c0f00940>] (start_kernel+0x68/0x370) [ 0.000000] [<c0f00940>] (start_kernel) from [<40208078>] (0x40208078) [ 0.000000] ---[ end trace cb88537fdc8fa200 ]--- [ 0.000000] CPU: All CPU(s) started in HYP mode. [ 0.000000] CPU: Virtualization extensions available. [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 518656 [ 0.000000] Kernel command line: console=ttySAC2,115200n8 earlyprintk debug root=/dev/mmcblk0p1 rootwait rw [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 1983240K/2080768K available (8421K kernel code, 1020K rwdata, 3600K rodata, 1024K init, 304K bss, 31992K reserved, 65536K cma-reserved, 1245184K highmem) [ 0.000000] Virtual kernel memory layout: [ [PYBOOT] [arndale 16:23]: got exception: maximum recursion depth exceeded ~$off
[PYBOOT] [arndale 16:24]: Done. Board bbb-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.631297] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.641551] ledtrig-cpu: registered to indicate activity on CPUs [ 1.648626] usbcore: registered new interface driver usbhid [ 1.654539] usbhid: USB HID core driver [ 1.666541] NET: Registered protocol family 10 [ 1.673122] sit: IPv6 over IPv4 tunneling driver [ 1.679260] NET: Registered protocol family 17 [ 1.684027] can: controller area network core (rev 20120528 abi 9) [ 1.690666] NET: Registered protocol family 29 [ 1.695386] can: raw protocol (rev 20120528) [ 1.699904] can: broadcast manager protocol (rev 20120528 t) [ 1.705897] can: netlink gateway (rev 20130117) max_hops=1 [ 1.712650] Key type dns_resolver registered [ 1.717558] omap_voltage_late_init: Voltage driver support not added [ 1.725836] ThumbEE CPU extension supported. [ 1.730464] Registering SWP/SWPB emulation handler [ 1.772791] tps65217 0-0024: TPS65217 ID 0xe version 1.2 [ 1.779323] at24 0-0050: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.787101] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 1.795798] at24 2-0054: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.803708] at24 2-0055: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.811540] at24 2-0056: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.819340] at24 2-0057: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.826696] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz [ 1.835367] cpufreq: cpufreq_online: CPU0: Running at unlisted freq: 550000 KHz [ 1.843292] cpufreq: cpufreq_online: CPU0: Unlisted initial frequency changed to: 600000 KHz [ 1.853027] mmc1: new high speed MMC card at address 0001 [ 1.860269] hctosys: unable to open rtc device (rtc0) [ 1.873299] mmcblk1: mmc1:0001 MMC02G 1.79 GiB [ 1.879339] mmcblk1boot0: mmc1:0001 MMC02G partition 1 1.00 MiB [ 1.886310] mmcblk1boot1: mmc1:0001 MMC02G partition 2 1.00 MiB [ 1.895230] mmcblk1: p1 p2 [ 1.900903] Waiting for root device /dev/mmcblk0p2...
[PYBOOT] [bbb 01:52]: Timed out waiting for "<type 'str'>":
[PYBOOT] [bbb 01:53]: got exception: timeout ~$off
[PYBOOT] [bbb 01:54]: Done. Board bbb-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
[ 1.322434] sdhci: Secure Digital Host Controller Interface driver [ 1.328956] sdhci: Copyright(c) Pierre Ossman [ 1.334758] omap_hsmmc 48060000.mmc: Got CD GPIO [ 1.397760] Synopsys Designware Multimedia Card Interface Driver [ 1.405130] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.414307] ledtrig-cpu: registered to indicate activity on CPUs [ 1.421059] usbcore: registered new interface driver usbhid [ 1.426939] usbhid: USB HID core driver [ 1.436513] NET: Registered protocol family 10 [ 1.443005] sit: IPv6 over IPv4 tunneling driver [ 1.448877] NET: Registered protocol family 17 [ 1.453616] can: controller area network core (rev 20120528 abi 9) [ 1.460208] NET: Registered protocol family 29 [ 1.464904] can: raw protocol (rev 20120528) [ 1.469416] can: broadcast manager protocol (rev 20120528 t) [ 1.475394] can: netlink gateway (rev 20130117) max_hops=1 [ 1.481897] Key type dns_resolver registered [ 1.486767] omap_voltage_late_init: Voltage driver support not added [ 1.494567] ThumbEE CPU extension supported. [ 1.507155] at24 0-0050: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.514703] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 1.522767] at24 2-0054: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.530506] at24 2-0055: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.538187] at24 2-0056: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.545855] at24 2-0057: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.553132] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz [ 1.560806] hctosys: unable to open rtc device (rtc0) [ 1.571533] Waiting for root device /dev/mmcblk0p2... [ 1.607020] mmc1: new high speed MMC card at address 0001 [ 1.613492] mmcblk1: mmc1:0001 MMC02G 1.79 GiB [ 1.618557] mmcblk1boot0: mmc1:0001 MMC02G partition 1 1.00 MiB [ 1.625042] mmcblk1boot1: mmc1:0001 MMC02G partition 2 1.00 MiB [ 1.633472] mmcblk1: p1 p2
[PYBOOT] [bbb 02:07]: Timed out waiting for "<type 'str'>":
[PYBOOT] [bbb 02:08]: got exception: timeout ~$off
[PYBOOT] [bbb 02:09]: Done. Board bbb-arm-omap2plus_defconfig failure log: -------------------------------------------------
[ 2.049237] omap_hsmmc 481d8000.mmc: lookup for GPIO cd failed [ 2.055372] omap_hsmmc 481d8000.mmc: GPIO lookup for consumer wp [ 2.061720] omap_hsmmc 481d8000.mmc: using device tree for GPIO lookup [ 2.068616] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@481d8000[0]' [ 2.078241] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@481d8000[0]' [ 2.087768] omap_hsmmc 481d8000.mmc: using lookup tables for GPIO lookup [ 2.094807] omap_hsmmc 481d8000.mmc: lookup for GPIO wp failed [ 2.138012] ledtrig-cpu: registered to indicate activity on CPUs [ 2.146749] oprofile: using arm/armv7 [ 2.151835] Initializing XFRM netlink socket [ 2.156918] NET: Registered protocol family 10 [ 2.167601] sit: IPv6 over IPv4 tunneling driver [ 2.176324] NET: Registered protocol family 17 [ 2.181249] NET: Registered protocol family 15 [ 2.186482] Key type dns_resolver registered [ 2.191396] omap_voltage_late_init: Voltage driver support not added [ 2.198134] sr_dev_init: No voltage domain specified for smartreflex0. Cannot initialize [ 2.206627] sr_dev_init: No voltage domain specified for smartreflex1. Cannot initialize [ 2.216887] ThumbEE CPU extension supported. [ 2.221541] Registering SWP/SWPB emulation handler [ 2.226591] SmartReflex Class3 initialized [ 2.295578] tps65217 0-0024: TPS65217 ID 0xe version 1.2 [ 2.302863] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 2.313384] mmc1: new high speed MMC card at address 0001 [ 2.325460] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz [ 2.333727] mmcblk1: mmc1:0001 MMC02G 1.79 GiB [ 2.341536] hctosys: unable to open rtc device (rtc0) [ 2.346858] sr_init: No PMIC hook to init smartreflex [ 2.352642] sr_init: platform driver register failed for SR [ 2.392567] mmcblk1boot0: mmc1:0001 MMC02G partition 1 1.00 MiB [ 2.400532] mmcblk1boot1: mmc1:0001 MMC02G partition 2 1.00 MiB [ 2.414770] mmcblk1: p1 p2 [ 2.431970] Waiting for root device /dev/mmcblk0p2...
[PYBOOT] [bbb 01:51]: Timed out waiting for "<type 'str'>":
[PYBOOT] [bbb 01:52]: got exception: timeout ~$off
[PYBOOT] [bbb 01:53]: Done. Board beagleboard-x15-arm-multi_lpae_defconfig failure log: -------------------------------------------------
[ 1.713102] at24 0-0050: 4096 byte 24c32 EEPROM, writable, 1 bytes/write [ 1.720189] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 1.745793] rtc-ds1307 2-006f: SET TIME! [ 1.751576] rtc-ds1307 2-006f: rtc core: registered mcp7941x as rtc0 [ 1.758326] rtc-ds1307 2-006f: 64 bytes nvram [ 1.762944] omap_i2c 48060000.i2c: bus 2 rev0.12 at 400 kHz [ 1.771142] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 1.776937] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 [ 1.785191] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x00010010 [ 1.794362] xhci-hcd xhci-hcd.0.auto: irq 400, io mem 0x48890000 [ 1.801253] hub 1-0:1.0: USB hub found [ 1.805207] hub 1-0:1.0: 1 port detected [ 1.809596] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 1.815363] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 [ 1.823489] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.832518] hub 2-0:1.0: USB hub found [ 1.836484] hub 2-0:1.0: 1 port detected [ 1.842519] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 1.876405] vdd_3v3: supplied by regen1 [ 1.915319] rtc-ds1307 2-006f: setting system clock to 2001-01-01 00:00:00 UTC (978307200) [ 1.933088] aic_dvdd_fixed: disabling [ 1.937843] Waiting for root device /dev/mmcblk0p1... [ 1.957353] mmc1: new high speed MMC card at address 0001 [ 1.963326] mmcblk1: mmc1:0001 S10004 3.56 GiB [ 1.968213] mmcblk1boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 1.974549] mmcblk1boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 1.981419] mmcblk1: p1 [ 2.115282] usb 1-1: new high-speed USB device number 2 using xhci-hcd [ 2.150309] usb 2-1: new SuperSpeed USB device number 2 using xhci-hcd [ 2.175606] hub 2-1:1.0: USB hub found [ 2.179574] hub 2-1:1.0: 4 ports detected [ 2.271630] hub 1-1:1.0: USB hub found [ 2.275623] hub 1-1:1.0: 4 ports detected
[PYBOOT] [beagleboard-x15 01:49]: Timed out waiting for "<type 'str'>":
[PYBOOT] [beagleboard-x15 01:50]: got exception: timeout ~$off
[PYBOOT] [beagleboard-x15 01:52]: Done. Board beagleboard-x15-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.717006] at24 0-0050: 4096 byte 24c32 EEPROM, writable, 1 bytes/write [ 1.724082] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 1.750373] rtc-ds1307 2-006f: SET TIME! [ 1.756118] rtc-ds1307 2-006f: rtc core: registered mcp7941x as rtc0 [ 1.762885] rtc-ds1307 2-006f: 64 bytes nvram [ 1.767498] omap_i2c 48060000.i2c: bus 2 rev0.12 at 400 kHz [ 1.775702] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 1.781486] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 [ 1.789725] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x00010010 [ 1.798894] xhci-hcd xhci-hcd.0.auto: irq 400, io mem 0x48890000 [ 1.805779] hub 1-0:1.0: USB hub found [ 1.809733] hub 1-0:1.0: 1 port detected [ 1.814125] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 1.819895] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 [ 1.828006] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.837021] hub 2-0:1.0: USB hub found [ 1.840984] hub 2-0:1.0: 1 port detected [ 1.847004] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 1.880971] vdd_3v3: supplied by regen1 [ 1.920384] rtc-ds1307 2-006f: setting system clock to 2001-01-01 00:00:00 UTC (978307200) [ 1.938142] aic_dvdd_fixed: disabling [ 1.942951] Waiting for root device /dev/mmcblk0p1... [ 1.986911] mmc1: new high speed MMC card at address 0001 [ 1.992879] mmcblk1: mmc1:0001 S10004 3.56 GiB [ 1.997753] mmcblk1boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 2.004086] mmcblk1boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 2.011120] mmcblk1: p1 [ 2.119867] usb 1-1: new high-speed USB device number 2 using xhci-hcd [ 2.154931] usb 2-1: new SuperSpeed USB device number 2 using xhci-hcd [ 2.180111] hub 2-1:1.0: USB hub found [ 2.184092] hub 2-1:1.0: 4 ports detected [ 2.276133] hub 1-1:1.0: USB hub found [ 2.280118] hub 1-1:1.0: 4 ports detected
[PYBOOT] [beagleboard-x15 01:43]: Timed out waiting for "<type 'str'>":
[PYBOOT] [beagleboard-x15 01:44]: got exception: timeout ~$off
[PYBOOT] [beagleboard-x15 01:45]: Done. Board beagleboard-x15-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
[ 1.590819] at24 0-0050: 4096 byte 24c32 EEPROM, writable, 1 bytes/write [ 1.597877] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 1.623072] rtc-ds1307 2-006f: SET TIME! [ 1.628698] rtc-ds1307 2-006f: rtc core: registered mcp7941x as rtc0 [ 1.635414] rtc-ds1307 2-006f: 64 bytes nvram [ 1.640002] omap_i2c 48060000.i2c: bus 2 rev0.12 at 400 kHz [ 1.647396] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 1.653173] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 [ 1.661397] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x00010010 [ 1.670548] xhci-hcd xhci-hcd.0.auto: irq 400, io mem 0x48890000 [ 1.677272] hub 1-0:1.0: USB hub found [ 1.681234] hub 1-0:1.0: 1 port detected [ 1.685545] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 1.691315] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 [ 1.699403] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.708272] hub 2-0:1.0: USB hub found [ 1.712217] hub 2-0:1.0: 1 port detected [ 1.717467] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 1.753312] vdd_3v3: supplied by regen1 [ 1.784386] rtc-ds1307 2-006f: setting system clock to 2001-01-01 00:00:00 UTC (978307200) [ 1.797404] aic_dvdd_fixed: disabling [ 1.802782] Waiting for root device /dev/mmcblk0p1... [ 1.849612] mmc1: new high speed MMC card at address 0001 [ 1.855482] mmcblk1: mmc1:0001 S10004 3.56 GiB [ 1.860312] mmcblk1boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 1.866608] mmcblk1boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 1.873390] mmcblk1: p1 [ 1.992610] usb 1-1: new high-speed USB device number 2 using xhci-hcd [ 2.022630] usb 2-1: new SuperSpeed USB device number 2 using xhci-hcd [ 2.051504] hub 2-1:1.0: USB hub found [ 2.055481] hub 2-1:1.0: 4 ports detected [ 2.147505] hub 1-1:1.0: USB hub found [ 2.151474] hub 1-1:1.0: 4 ports detected
[PYBOOT] [beagleboard-x15 01:54]: Timed out waiting for "<type 'str'>":
[PYBOOT] [beagleboard-x15 01:55]: got exception: timeout ~$off
[PYBOOT] [beagleboard-x15 01:56]: Done. Board beagleboard-x15-arm-omap2plus_defconfig failure log: -------------------------------------------------
[ 2.173831] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 2.180711] of_get_named_gpiod_flags: parsed 'cd-gpios' property of node '/ocp/mmc@4809c000[0]' - status (0) [ 2.191095] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 2.195956] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer wp [ 2.202250] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 2.209118] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@4809c000[0]' [ 2.218721] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@4809c000[0]' [ 2.228223] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 2.235281] omap_hsmmc 4809c000.mmc: lookup for GPIO wp failed [ 2.283792] omap_hsmmc 480b4000.mmc: GPIO lookup for consumer cd [ 2.290088] omap_hsmmc 480b4000.mmc: using device tree for GPIO lookup [ 2.296962] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/ocp/mmc@480b4000[0]' [ 2.306548] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/ocp/mmc@480b4000[0]' [ 2.316051] omap_hsmmc 480b4000.mmc: using lookup tables for GPIO lookup [ 2.323090] omap_hsmmc 480b4000.mmc: lookup for GPIO cd failed [ 2.329204] omap_hsmmc 480b4000.mmc: GPIO lookup for consumer wp [ 2.335514] omap_hsmmc 480b4000.mmc: using device tree for GPIO lookup [ 2.342357] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@480b4000[0]' [ 2.351941] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@480b4000[0]' [ 2.361436] omap_hsmmc 480b4000.mmc: using lookup tables for GPIO lookup [ 2.368481] omap_hsmmc 480b4000.mmc: lookup for GPIO wp failed [ 2.375175] vdd_3v3: supplied by regen1 [ 2.413868] hctosys: unable to open rtc device (rtc0) [ 2.419168] sr_init: No PMIC hook to init smartreflex [ 2.424677] sr_init: platform driver register failed for SR [ 2.471912] aic_dvdd_fixed: disabling [ 2.476174] ldousb: disabling [ 2.483842] Waiting for root device /dev/mmcblk0p1... [ 2.535481] mmc1: new high speed MMC card at address 0001 [ 2.543230] mmcblk1: mmc1:0001 S10004 3.56 GiB [ 2.548561] mmcblk1boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 2.555352] mmcblk1boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 2.563815] mmcblk1: p1
[PYBOOT] [beagleboard-x15 01:41]: Timed out waiting for "<type 'str'>":
[PYBOOT] [beagleboard-x15 01:42]: got exception: timeout ~$off
[PYBOOT] [beagleboard-x15 01:43]: Done. Board colombus-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
[....] Synthesizing the initial hotplug events...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Waiting for /dev to be fully populated...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Activating swap...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [ 41.380112] EXT4-fs (mmcblk0p1): warning: mounting fs with errors, running e2fsck is recommended [ 41.394630] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [....] Cleaning up temporary files... /tmp[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] Activating lvm and md swap...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Checking file systems...fsck from util-linux 2.20.1 [?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Mounting local filesystems...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Activating swapfile swap...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Cleaning up temporary files...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] Setting kernel variables ...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [ 84.660547] random: dd urandom read with 56 bits of entropy available [....] Configuring network interfaces...Internet Systems Consortium DHCP Client 4.2.2 Copyright 2004-2011 Internet Systems Consortium. All rights reserved. For info, please visit https://www.isc.org/software/dhcp/
[ 89.059124] eth0: device MAC address ce:5b:93:11:a5:34 [ 89.216862] RX IPC Checksum Offload disabled [ 89.221496] No MAC Management Counters available [ 89.227261] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready Listening on LPF/eth0/ce:5b:93:11:a5:34 Sending on LPF/eth0/ce:5b:93:11:a5:34 Sending on Socket/fallback DHCPREQUEST on eth0 to 255.255.255.255 port 67 DHCPREQUEST on eth0 to 255.255.255.255 port 67 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 6 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 6 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 14 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 21 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 14
[PYBOOT] [colombus 03:17]: Timed out waiting for "<type 'str'>":
[PYBOOT] [colombus 03:18]: got exception: timeout ~$off
[PYBOOT] [colombus 03:19]: Done. Board cosmic-arm-imx_v6_v7_defconfig failure log: -------------------------------------------------
[ 14.466934] blk_update_request: I/O error, dev mmcblk0, sector 3633185 [ 18.541170] mmcblk0: error -110 transferring data, sector 3633186, nr 230, cmd response 0x900, card status 0x0 [ 18.551496] blk_update_request: I/O error, dev mmcblk0, sector 3633186 [ 22.625676] mmcblk0: error -110 transferring data, sector 3633187, nr 229, cmd response 0x900, card status 0x0 [ 22.635994] blk_update_request: I/O error, dev mmcblk0, sector 3633187 [ 26.710222] mmcblk0: error -110 transferring data, sector 3633188, nr 228, cmd response 0x900, card status 0x0 [ 26.720543] blk_update_request: I/O error, dev mmcblk0, sector 3633188 [ 30.794725] mmcblk0: error -110 transferring data, sector 3633189, nr 227, cmd response 0x900, card status 0x0 [ 30.805053] blk_update_request: I/O error, dev mmcblk0, sector 3633189 [ 34.879292] mmcblk0: error -110 transferring data, sector 3633190, nr 226, cmd response 0x900, card status 0x0 [ 34.889620] blk_update_request: I/O error, dev mmcblk0, sector 3633190 [ 38.963800] mmcblk0: error -110 transferring data, sector 3633191, nr 225, cmd response 0x900, card status 0x0 [ 38.974125] blk_update_request: I/O error, dev mmcblk0, sector 3633191 [ 43.048387] mmcblk0: error -110 transferring data, sector 3633192, nr 224, cmd response 0x900, card status 0x0 [ 43.058748] blk_update_request: I/O error, dev mmcblk0, sector 3633192 [ 47.133110] mmcblk0: error -110 transferring data, sector 3633193, nr 223, cmd response 0x900, card status 0x0 [ 47.143428] blk_update_request: I/O error, dev mmcblk0, sector 3633193 [ 51.217662] mmcblk0: error -110 transferring data, sector 3633194, nr 222, cmd response 0x900, card status 0x0 [ 51.227980] blk_update_request: I/O error, dev mmcblk0, sector 3633194 [ 55.302217] mmcblk0: error -110 transferring data, sector 3633195, nr 221, cmd response 0x900, card status 0x0 [ 55.312534] blk_update_request: I/O error, dev mmcblk0, sector 3633195 [ 59.386762] mmcblk0: error -110 transferring data, sector 3633196, nr 220, cmd response 0x900, card status 0x0 [ 59.397078] blk_update_request: I/O error, dev mmcblk0, sector 3633196 [ 63.471304] mmcblk0: error -110 transferring data, sector 3633197, nr 219, cmd response 0x900, card status 0x0 [ 63.481621] blk_update_request: I/O error, dev mmcblk0, sector 3633197 [ 67.555798] mmcblk0: error -110 transferring data, sector 3633198, nr 218, cmd response 0x900, card status 0x0 [ 67.566117] blk_update_request: I/O error, dev mmcblk0, sector 3633198 [ 71.640347] mmcblk0: error -110 transferring data, sector 3633199, nr 217, cmd response 0x900, card status 0x0 [ 71.650668] blk_update_request: I/O error, dev mmcblk0, sector 3633199 [ 75.724852] mmcblk0: error -110 transferring data, sector 3633200, nr 216, cmd response 0x900, card status 0x0 [ 75.735171] blk_update_request: I/O error, dev mmcblk0, sector 3633200 [ 79.809400] mmcblk0: error -110 transferring data, sector 3633201, nr 215, cmd response 0x900, card status 0x0 [ 79.819726] blk_update_request: I/O error, dev mmcblk0, sector 3633201
[PYBOOT] [cosmic 01:58]: Timed out waiting for "<type 'str'>":
[PYBOOT] [cosmic 01:59]: got exception: timeout ~$off
[PYBOOT] [cosmic 02:00]: Done. Board cosmic-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 14.077226] blk_update_request: I/O error, dev mmcblk0, sector 3633185 [ 18.151214] mmcblk0: error -110 transferring data, sector 3633186, nr 230, cmd response 0x900, card status 0x0 [ 18.161301] blk_update_request: I/O error, dev mmcblk0, sector 3633186 [ 22.235293] mmcblk0: error -110 transferring data, sector 3633187, nr 229, cmd response 0x900, card status 0x0 [ 22.245372] blk_update_request: I/O error, dev mmcblk0, sector 3633187 [ 26.319355] mmcblk0: error -110 transferring data, sector 3633188, nr 228, cmd response 0x900, card status 0x0 [ 26.329431] blk_update_request: I/O error, dev mmcblk0, sector 3633188 [ 30.403417] mmcblk0: error -110 transferring data, sector 3633189, nr 227, cmd response 0x900, card status 0x0 [ 30.413500] blk_update_request: I/O error, dev mmcblk0, sector 3633189 [ 34.487493] mmcblk0: error -110 transferring data, sector 3633190, nr 226, cmd response 0x900, card status 0x0 [ 34.497579] blk_update_request: I/O error, dev mmcblk0, sector 3633190 [ 38.571566] mmcblk0: error -110 transferring data, sector 3633191, nr 225, cmd response 0x900, card status 0x0 [ 38.581633] blk_update_request: I/O error, dev mmcblk0, sector 3633191 [ 42.655619] mmcblk0: error -110 transferring data, sector 3633192, nr 224, cmd response 0x900, card status 0x0 [ 42.665693] blk_update_request: I/O error, dev mmcblk0, sector 3633192 [ 46.739682] mmcblk0: error -110 transferring data, sector 3633193, nr 223, cmd response 0x900, card status 0x0 [ 46.749752] blk_update_request: I/O error, dev mmcblk0, sector 3633193 [ 50.823744] mmcblk0: error -110 transferring data, sector 3633194, nr 222, cmd response 0x900, card status 0x0 [ 50.833813] blk_update_request: I/O error, dev mmcblk0, sector 3633194 [ 54.907802] mmcblk0: error -110 transferring data, sector 3633195, nr 221, cmd response 0x900, card status 0x0 [ 54.917872] blk_update_request: I/O error, dev mmcblk0, sector 3633195 [ 58.991892] mmcblk0: error -110 transferring data, sector 3633196, nr 220, cmd response 0x900, card status 0x0 [ 59.001967] blk_update_request: I/O error, dev mmcblk0, sector 3633196 [ 63.075954] mmcblk0: error -110 transferring data, sector 3633197, nr 219, cmd response 0x900, card status 0x0 [ 63.086027] blk_update_request: I/O error, dev mmcblk0, sector 3633197 [ 67.160014] mmcblk0: error -110 transferring data, sector 3633198, nr 218, cmd response 0x900, card status 0x0 [ 67.170088] blk_update_request: I/O error, dev mmcblk0, sector 3633198 [ 71.244069] mmcblk0: error -110 transferring data, sector 3633199, nr 217, cmd response 0x900, card status 0x0 [ 71.254146] blk_update_request: I/O error, dev mmcblk0, sector 3633199 [ 75.328136] mmcblk0: error -110 transferring data, sector 3633200, nr 216, cmd response 0x900, card status 0x0 [ 75.338215] blk_update_request: I/O error, dev mmcblk0, sector 3633200 [ 79.412205] mmcblk0: error -110 transferring data, sector 3633201, nr 215, cmd response 0x900, card status 0x0 [ 79.422284] blk_update_request: I/O error, dev mmcblk0, sector 3633201
[PYBOOT] [cosmic 02:03]: Timed out waiting for "<type 'str'>":
[PYBOOT] [cosmic 02:04]: got exception: timeout ~$off
[PYBOOT] [cosmic 02:05]: Done. Board cosmic-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
[ 13.872674] blk_update_request: I/O error, dev mmcblk0, sector 3633185 [ 17.946586] mmcblk0: error -110 transferring data, sector 3633186, nr 230, cmd response 0x900, card status 0x0 [ 17.956639] blk_update_request: I/O error, dev mmcblk0, sector 3633186 [ 22.030550] mmcblk0: error -110 transferring data, sector 3633187, nr 229, cmd response 0x900, card status 0x0 [ 22.040602] blk_update_request: I/O error, dev mmcblk0, sector 3633187 [ 26.114517] mmcblk0: error -110 transferring data, sector 3633188, nr 228, cmd response 0x900, card status 0x0 [ 26.124576] blk_update_request: I/O error, dev mmcblk0, sector 3633188 [ 30.198489] mmcblk0: error -110 transferring data, sector 3633189, nr 227, cmd response 0x900, card status 0x0 [ 30.208549] blk_update_request: I/O error, dev mmcblk0, sector 3633189 [ 34.282463] mmcblk0: error -110 transferring data, sector 3633190, nr 226, cmd response 0x900, card status 0x0 [ 34.292525] blk_update_request: I/O error, dev mmcblk0, sector 3633190 [ 38.366445] mmcblk0: error -110 transferring data, sector 3633191, nr 225, cmd response 0x900, card status 0x0 [ 38.376505] blk_update_request: I/O error, dev mmcblk0, sector 3633191 [ 42.450420] mmcblk0: error -110 transferring data, sector 3633192, nr 224, cmd response 0x900, card status 0x0 [ 42.460478] blk_update_request: I/O error, dev mmcblk0, sector 3633192 [ 46.534392] mmcblk0: error -110 transferring data, sector 3633193, nr 223, cmd response 0x900, card status 0x0 [ 46.544437] blk_update_request: I/O error, dev mmcblk0, sector 3633193 [ 50.618347] mmcblk0: error -110 transferring data, sector 3633194, nr 222, cmd response 0x900, card status 0x0 [ 50.628393] blk_update_request: I/O error, dev mmcblk0, sector 3633194 [ 54.702299] mmcblk0: error -110 transferring data, sector 3633195, nr 221, cmd response 0x900, card status 0x0 [ 54.712349] blk_update_request: I/O error, dev mmcblk0, sector 3633195 [ 58.786255] mmcblk0: error -110 transferring data, sector 3633196, nr 220, cmd response 0x900, card status 0x0 [ 58.796305] blk_update_request: I/O error, dev mmcblk0, sector 3633196 [ 62.870217] mmcblk0: error -110 transferring data, sector 3633197, nr 219, cmd response 0x900, card status 0x0 [ 62.880270] blk_update_request: I/O error, dev mmcblk0, sector 3633197 [ 66.954184] mmcblk0: error -110 transferring data, sector 3633198, nr 218, cmd response 0x900, card status 0x0 [ 66.964234] blk_update_request: I/O error, dev mmcblk0, sector 3633198 [ 71.038149] mmcblk0: error -110 transferring data, sector 3633199, nr 217, cmd response 0x900, card status 0x0 [ 71.048208] blk_update_request: I/O error, dev mmcblk0, sector 3633199 [ 75.122122] mmcblk0: error -110 transferring data, sector 3633200, nr 216, cmd response 0x900, card status 0x0 [ 75.132180] blk_update_request: I/O error, dev mmcblk0, sector 3633200 [ 79.206088] mmcblk0: error -110 transferring data, sector 3633201, nr 215, cmd response 0x900, card status 0x0 [ 79.216145] blk_update_request: I/O error, dev mmcblk0, sector 3633201
[PYBOOT] [cosmic 02:00]: Timed out waiting for "<type 'str'>":
[PYBOOT] [cosmic 02:01]: got exception: timeout ~$off
[PYBOOT] [cosmic 02:02]: Done. Board dalmore-arm-multi_lpae_defconfig failure log: -------------------------------------------------
[ 2.486277] Key type dns_resolver registered [ 2.492686] ThumbEE CPU extension supported. [ 2.497104] Registering SWP/SWPB emulation handler [ 2.522363] vdd-sys-5v0: supplied by vdd_ac_bat [ 2.530159] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 2.541603] vdd_hdmi_5v0: supplied by vdd-sys-5v0 [ 2.556803] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.563568] [drm] No driver support for vblank timestamp query. [ 2.588834] mmc1: new high speed MMC card at address 0001 [ 2.598587] mmcblk1: mmc1:0001 SEM32G 29.1 GiB [ 2.606826] mmcblk1boot0: mmc1:0001 SEM32G partition 1 4.00 MiB [ 2.615647] mmcblk1boot1: mmc1:0001 SEM32G partition 2 4.00 MiB [ 2.623944] mmcblk1rpmb: mmc1:0001 SEM32G partition 3 4.00 MiB [ 2.635521] mmcblk1: p1 [ 2.742753] Console: switching to colour frame buffer device 240x75 [ 2.830363] drm drm: fb0: frame buffer device [ 2.849087] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 2.859173] usb2_vbus: supplied by vdd-sys-5v0 [ 2.870788] tegra-ehci 7d008000.usb: EHCI Host Controller [ 2.876394] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 2.885243] tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 [ 2.899103] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 2.909390] hub 1-0:1.0: USB hub found [ 2.913390] hub 1-0:1.0: 1 port detected [ 2.923506] input: gpio-keys as /devices/soc0/gpio-keys/input/input0 [ 2.937367] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 3.000554] dvdd_ts: disabling [ 3.003656] usb1_vbus: disabling [ 3.007023] vdd_cam_1v8_reg: disabling [ 3.014533] Waiting for root device /dev/mmcblk0p1... [ 3.224103] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 4.202372] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f [ 48.865926] random: nonblocking pool is initialized
[PYBOOT] [dalmore 01:54]: Timed out waiting for "<type 'str'>":
[PYBOOT] [dalmore 01:55]: got exception: timeout ~$off
[PYBOOT] [dalmore 01:57]: Done. Board dalmore-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 2.491525] Key type dns_resolver registered [ 2.497959] ThumbEE CPU extension supported. [ 2.502385] Registering SWP/SWPB emulation handler [ 2.528595] vdd-sys-5v0: supplied by vdd_ac_bat [ 2.535644] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 2.547009] vdd_hdmi_5v0: supplied by vdd-sys-5v0 [ 2.563110] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.569887] [drm] No driver support for vblank timestamp query. [ 2.585803] mmc1: new high speed MMC card at address 0001 [ 2.595755] mmcblk1: mmc1:0001 SEM32G 29.1 GiB [ 2.603824] mmcblk1boot0: mmc1:0001 SEM32G partition 1 4.00 MiB [ 2.613180] mmcblk1boot1: mmc1:0001 SEM32G partition 2 4.00 MiB [ 2.621610] mmcblk1rpmb: mmc1:0001 SEM32G partition 3 4.00 MiB [ 2.631828] mmcblk1: p1 [ 2.748122] Console: switching to colour frame buffer device 240x75 [ 2.835542] drm drm: fb0: frame buffer device [ 2.853840] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 2.863951] usb2_vbus: supplied by vdd-sys-5v0 [ 2.875573] tegra-ehci 7d008000.usb: EHCI Host Controller [ 2.881168] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 2.890041] tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 [ 2.903856] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 2.914283] hub 1-0:1.0: USB hub found [ 2.918290] hub 1-0:1.0: 1 port detected [ 2.928310] input: gpio-keys as /devices/soc0/gpio-keys/input/input0 [ 2.941912] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 3.004889] dvdd_ts: disabling [ 3.007990] usb1_vbus: disabling [ 3.011367] vdd_cam_1v8_reg: disabling [ 3.018858] Waiting for root device /dev/mmcblk0p1... [ 3.228855] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 4.207036] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f [ 49.938299] random: nonblocking pool is initialized
[PYBOOT] [dalmore 02:02]: Timed out waiting for "<type 'str'>":
[PYBOOT] [dalmore 02:03]: got exception: timeout ~$off
[PYBOOT] [dalmore 02:05]: Done. Board dalmore-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
[ 2.031118] can: broadcast manager protocol (rev 20120528 t) [ 2.036877] can: netlink gateway (rev 20130117) max_hops=1 [ 2.043519] Key type dns_resolver registered [ 2.048641] ThumbEE CPU extension supported. [ 2.080469] vdd-sys-5v0: supplied by vdd_ac_bat [ 2.085408] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 2.095496] vdd_hdmi_5v0: supplied by vdd-sys-5v0 [ 2.117695] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.124377] [drm] No driver support for vblank timestamp query. [ 2.288278] Console: switching to colour frame buffer device 240x75 [ 2.374192] drm drm: fb0: frame buffer device [ 2.378809] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 2.386784] usb2_vbus: supplied by vdd-sys-5v0 [ 2.392751] mmc1: new high speed MMC card at address 0001 [ 2.401930] tegra-ehci 7d008000.usb: EHCI Host Controller [ 2.407513] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 2.415596] mmcblk1: mmc1:0001 SEM32G 29.1 GiB [ 2.420623] mmcblk1boot0: mmc1:0001 SEM32G partition 1 4.00 MiB [ 2.427339] tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 [ 2.433423] mmcblk1boot1: mmc1:0001 SEM32G partition 2 4.00 MiB [ 2.439790] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 2.445943] mmcblk1rpmb: mmc1:0001 SEM32G partition 3 4.00 MiB [ 2.453663] mmcblk1: p1 [ 2.458559] hub 1-0:1.0: USB hub found [ 2.466908] hub 1-0:1.0: 1 port detected [ 2.475061] input: gpio-keys as /devices/soc0/gpio-keys/input/input0 [ 2.486332] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 2.519482] dvdd_ts: disabling [ 2.522569] usb1_vbus: disabling [ 2.525890] vdd_cam_1v8_reg: disabling [ 2.531312] Waiting for root device /dev/mmcblk0p1... [ 2.779548] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 3.731931] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f
[PYBOOT] [dalmore 01:48]: Timed out waiting for "<type 'str'>":
[PYBOOT] [dalmore 01:49]: got exception: timeout ~$off
[PYBOOT] [dalmore 01:51]: Done. Board dalmore-arm-tegra_defconfig failure log: -------------------------------------------------
[ 2.638713] Bluetooth: RFCOMM ver 1.11 [ 2.642693] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 2.648088] Bluetooth: BNEP socket layer initialized [ 2.653184] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 2.659184] Bluetooth: HIDP socket layer initialized [ 2.666118] Key type dns_resolver registered [ 2.675719] Registering SWP/SWPB emulation handler [ 2.704318] vdd-sys-5v0: supplied by vdd_ac_bat [ 2.709586] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 2.716680] vdd_hdmi_5v0: supplied by vdd-sys-5v0 [ 2.738542] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.745497] [drm] No driver support for vblank timestamp query. [ 2.923492] Console: switching to colour frame buffer device 240x75 [ 3.010292] drm drm: fb0: frame buffer device [ 3.041854] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.049044] usb2_vbus: supplied by vdd-sys-5v0 [ 3.056190] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.061940] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 3.070918] tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 [ 3.091780] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 3.105833] hub 1-0:1.0: USB hub found [ 3.109878] hub 1-0:1.0: 1 port detected [ 3.124116] input: gpio-keys as /devices/soc0/gpio-keys/input/input1 [ 3.140446] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:01 UTC (946684801) [ 3.235252] dvdd_ts: disabling [ 3.238354] usb1_vbus: disabling [ 3.241731] vdd_cam_1v8_reg: disabling [ 3.246424] ALSA device list: [ 3.249418] #0: NVIDIA Tegra Dalmore [ 3.255441] Waiting for root device /dev/mmcblk0p1... [ 3.431728] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 4.455119] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f [ 62.223516] random: nonblocking pool is initialized
[PYBOOT] [dalmore 02:53]: Timed out waiting for "<type 'str'>":
[PYBOOT] [dalmore 02:54]: got exception: timeout ~$off
[PYBOOT] [dalmore 02:55]: Done. Board odroidu3-arm-exynos_defconfig failure log: -------------------------------------------------
[ 1.693848] usbhid: USB HID core driver [ 1.702594] NET: Registered protocol family 10 [ 1.703219] sit: IPv6 over IPv4 tunneling driver [ 1.706441] NET: Registered protocol family 17 [ 1.710561] NET: Registered protocol family 15 [ 1.714915] Key type dns_resolver registered [ 1.719243] Registering SWP/SWPB emulation handler [ 1.728092] s3c-rtc 10070000.rtc: rtc disabled, re-enabling [ 1.729452] s3c-rtc 10070000.rtc: warning: invalid RTC value so initializing it [ 1.736892] s3c-rtc 10070000.rtc: rtc core: registered s3c as rtc1 [ 1.756582] mmc_host mmc1: Bus speed (slot 0) = 44000000Hz (slot req 52000000Hz, actual 44000000HZ div = 0) [ 1.760824] mmc_host mmc1: Bus speed (slot 0) = 73333333Hz (slot req 52000000Hz, actual 36666666HZ div = 1) [ 1.770692] mmc1: new DDR MMC card at address 0001 [ 1.775322] max98090 1-0010: MAX98090 REVID=0x43 [ 1.780226] mmcblk1: mmc1:0001 008G92 7.28 GiB [ 1.784546] mmcblk1boot0: mmc1:0001 008G92 partition 1 4.00 MiB [ 1.790525] usb 1-3: New USB device found, idVendor=0424, idProduct=3503 [ 1.796870] usb 1-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.804203] mmcblk1boot1: mmc1:0001 008G92 partition 2 4.00 MiB [ 1.810442] max98090 1-0010: use default 2.8v micbias [ 1.815101] hub 1-3:1.0: USB hub found [ 1.818662] mmcblk1rpmb: mmc1:0001 008G92 partition 3 512 KiB [ 1.824631] hub 1-3:1.0: 3 ports detected [ 1.829996] mmcblk1: p1 p2 [ 1.835551] asoc-simple-card sound: HiFi <-> 3830000.i2s mapping ok [ 1.840166] input: gpio_keys as /devices/platform/gpio_keys/input/input0 [ 1.877360] max77686-rtc max77686-rtc: setting system clock to 2000-01-01 01:00:19 UTC (946688419) [ 1.895043] VDD10_HDMI_1.0V: disabling [ 1.895728] vdd_g3d: disabling [ 1.896809] BUCK8_2.8V: disabling [ 1.900788] ALSA device list: [ 1.902456] #0: Odroid-U3 [ 1.906027] Waiting for root device /dev/mmcblk0p2...
[PYBOOT] [odroidu3 01:50]: Timed out waiting for "<type 'str'>":
[PYBOOT] [odroidu3 01:51]: got exception: timeout ~$off
[PYBOOT] [odroidu3 01:52]: Done. Board omap5uevm-arm-multi_lpae_defconfig failure log: -------------------------------------------------
[ 2.359883] bf40: 00000007 c0ee0958 c1336584 c1410000 c1410000 c1410000 c1410000 c1203224 [ 2.368450] bf60: c11a3838 c11a383c 00000118 c1100db0 00000007 00000007 00000000 c11005ac [ 2.377013] bf80: 00000000 00000000 c0b4fc4c 00000000 00000000 00000000 00000000 00000000 [ 2.385569] bfa0: 00000000 c0b4fc54 00000000 c0307d38 00000000 00000000 00000000 00000000 [ 2.394134] bfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 2.402701] bfe0: 00000000 00000000 00000000 00000000 00000013 00000000 4898c0cd e9d998e8 [ 2.411269] [<c039a078>] (ktime_get) from [<c03a4dbc>] (tick_sched_timer+0x24/0x8c) [ 2.419288] [<c03a4dbc>] (tick_sched_timer) from [<c0394cd0>] (__hrtimer_run_queues+0x128/0x1bc) [ 2.428487] [<c0394cd0>] (__hrtimer_run_queues) from [<c0394f20>] (hrtimer_interrupt+0xa8/0x208) [ 2.437693] [<c0394f20>] (hrtimer_interrupt) from [<c09dc930>] (arch_timer_handler_virt+0x28/0x30) [ 2.447078] [<c09dc930>] (arch_timer_handler_virt) from [<c0387d50>] (handle_percpu_devid_irq+0x6c/0x84) [ 2.457011] [<c0387d50>] (handle_percpu_devid_irq) from [<c0383a64>] (generic_handle_irq+0x24/0x34) [ 2.466489] [<c0383a64>] (generic_handle_irq) from [<c0383d14>] (__handle_domain_irq+0x5c/0xb4) [ 2.475589] [<c0383d14>] (__handle_domain_irq) from [<c0301798>] (gic_handle_irq+0x54/0x94) [ 2.484327] [<c0301798>] (gic_handle_irq) from [<c030c494>] (__irq_svc+0x54/0x70) [ 2.492155] Exception stack(0xee05bde0 to 0xee05be28) [ 2.497445] bde0: ee697a74 40000013 00000000 00000001 ee697a00 ee697a70 00000000 00000000 [ 2.505998] be00: 00a00039 00000118 00000008 00000000 00000000 ee05be30 c0786678 c0b54c60 [ 2.514560] be20: 60000013 ffffffff [ 2.518213] [<c030c494>] (__irq_svc) from [<c0b54c60>] (_raw_spin_unlock_irqrestore+0x1c/0x20) [ 2.527235] [<c0b54c60>] (_raw_spin_unlock_irqrestore) from [<c0786678>] (device_pm_sleep_init+0x40/0x58) [ 2.537264] [<c0786678>] (device_pm_sleep_init) from [<c0776c48>] (device_initialize+0x78/0x94) [ 2.546367] [<c0776c48>] (device_initialize) from [<c0778860>] (device_create_groups_vargs+0x44/0xbc) [ 2.556016] [<c0778860>] (device_create_groups_vargs) from [<c0778950>] (device_create_with_groups+0x24/0x2c) [ 2.566398] [<c0778950>] (device_create_with_groups) from [<c06ea7f8>] (misc_register+0x150/0x19c) [ 2.575785] [<c06ea7f8>] (misc_register) from [<c113ee1c>] (ubi_init+0x58/0x260) [ 2.583536] [<c113ee1c>] (ubi_init) from [<c0301e7c>] (do_one_initcall+0x90/0x1d4) [ 2.591465] [<c0301e7c>] (do_one_initcall) from [<c1100db0>] (kernel_init_freeable+0x158/0x1e8) [ 2.600582] [<c1100db0>] (kernel_init_freeable) from [<c0b4fc54>] (kernel_init+0x8/0x114) [ 2.609145] [<c0b4fc54>] (kernel_init) from [<c0307d38>] (ret_from_fork+0x14/0x3c) [ 2.617067] Code: bad PC value [ 2.620265] ---[ end trace 562bb44f1615e8ea ]--- [ 2.625092] Kernel panic - not syncing: Fatal exception in interrupt [ 3.608691] SMP: failed to stop secondary CPUs [ 3.613338] ---[ end Kernel panic - not syncing: Fatal exception in interrupt
[PYBOOT] [omap5uevm 00:48]: got exception: panic ~$off
[PYBOOT] [omap5uevm 00:49]: Done. Board omap5uevm-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.764299] usb 1-3: new high-speed USB device number 2 using ehci-omap [ 1.774981] usbhid: USB HID core driver [ 1.783470] NET: Registered protocol family 10 [ 1.788645] sit: IPv6 over IPv4 tunneling driver [ 1.793907] NET: Registered protocol family 17 [ 1.798570] can: controller area network core (rev 20120528 abi 9) [ 1.805081] NET: Registered protocol family 29 [ 1.809743] can: raw protocol (rev 20120528) [ 1.814200] can: broadcast manager protocol (rev 20120528 t) [ 1.820131] can: netlink gateway (rev 20130117) max_hops=1 [ 1.826140] Key type dns_resolver registered [ 1.830707] omap_vc_init_channel: No PMIC info for vdd_core [ 1.836537] omap_vp_init: No PMIC info for vdd_core [ 1.841641] omap_vc_init_channel: No PMIC info for vdd_mm [ 1.847285] omap_vp_init: No PMIC info for vdd_mm [ 1.852207] omap_vc_init_channel: No PMIC info for vdd_mpu [ 1.857943] omap_vp_init: No PMIC info for vdd_mpu [ 1.863463] Power Management for TI OMAP4+ devices. [ 1.868691] ThumbEE CPU extension supported. [ 1.873180] Registering SWP/SWPB emulation handler [ 1.880758] palmas 0-0048: Irq flag is 0x00000000 [ 1.897129] smsc95xx v1.0.4 [ 1.906963] palmas 0-0048: Muxing GPIO 2, PWM 0, LED 0 [ 1.917517] palmas-rtc 48070000.i2c:palmas@48:rtc: rtc core: registered 48070000.i2c:palmas as rtc0 [ 1.942308] mmc0: new high speed MMC card at address 0001 [ 1.948514] mmcblk0: mmc0:0001 SEM04G 3.69 GiB [ 1.948809] smsc95xx 1-3:1.0 eth0: register 'smsc95xx' at usb-4a064c00.ehci-3, smsc95xx USB 2.0 Ethernet, 42:3d:01:c0:f7:b5 [ 1.965123] mmcblk0boot0: mmc0:0001 SEM04G partition 1 2.00 MiB [ 1.971487] mmcblk0boot1: mmc0:0001 SEM04G partition 2 2.00 MiB [ 1.990648] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 2.015051] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 2.056045] cpufreq: cpufreq_online: CPU0: Running at unlisted freq: 1100000 KHz [ 2.063947] cpufreq: cpufreq_online: CPU0: Unlisted initial frequency changed to: 1500000 KHz
[PYBOOT] [omap5uevm 02:07]: Timed out waiting for "<type 'str'>":
[PYBOOT] [omap5uevm 02:08]: got exception: timeout ~$off
[PYBOOT] [omap5uevm 02:09]: Done. Board omap5uevm-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
[ 49.779331] [<c034de40>] (kthread_data) from [<c0349ab4>] (wq_worker_sleeping+0x8/0xb8) [ 49.787709] [<c0349ab4>] (wq_worker_sleeping) from [<c0a8ea98>] (__schedule+0x31c/0x470) [ 49.796183] [<c0a8ea98>] (__schedule) from [<c0a8ec30>] (schedule+0x44/0x9c) [ 49.803567] [<c0a8ec30>] (schedule) from [<c0337640>] (do_exit+0x7b4/0x908) [ 49.810857] [<c0337640>] (do_exit) from [<c030b5c4>] (die+0x328/0x394) [ 49.817691] [<c030b5c4>] (die) from [<c031a290>] (__do_kernel_fault.part.0+0x64/0x1e4) [ 49.825981] [<c031a290>] (__do_kernel_fault.part.0) from [<c0315580>] (do_page_fault+0x370/0x384) [ 49.835267] [<c0315580>] (do_page_fault) from [<c030125c>] (do_DataAbort+0x3c/0xb8) [ 49.843288] [<c030125c>] (do_DataAbort) from [<c030bc60>] (__dabt_svc+0x40/0x60) [ 49.851032] Exception stack(0xee4fad08 to 0xee4fad50) [ 49.856314] ad00: ee482200 00000000 ffffffff 00000000 ee482200 00000000 [ 49.864875] ad20: c1035a08 00000000 ee48242c c0a8ec30 c034de42 ee4fad9c ee483338 ee4fad58 [ 49.873432] ad40: c0349ab4 c034de40 20000193 ffffffff [ 49.878717] [<c030bc60>] (__dabt_svc) from [<c034de40>] (kthread_data+0x4/0xc) [ 49.886279] [<c034de40>] (kthread_data) from [<c0349ab4>] (wq_worker_sleeping+0x8/0xb8) [ 49.894659] [<c0349ab4>] (wq_worker_sleeping) from [<c0a8ea98>] (__schedule+0x31c/0x470) [ 49.903126] [<c0a8ea98>] (__schedule) from [<c0a8ec30>] (schedule+0x44/0x9c) [ 49.910508] [<c0a8ec30>] (schedule) from [<c0337640>] (do_exit+0x7b4/0x908) [ 49.917800] [<c0337640>] (do_exit) from [<c030b5c4>] (die+0x328/0x394) [ 49.924638] [<c030b5c4>] (die) from [<c031a290>] (__do_kernel_fault.part.0+0x64/0x1e4) [ 49.932936] [<c031a290>] (__do_kernel_fault.part.0) from [<c0315580>] (do_page_fault+0x370/0x384) [ 49.942224] [<c0315580>] (do_page_fault) from [<c030125c>] (do_DataAbort+0x3c/0xb8) [ 49.950241] [<c030125c>] (do_DataAbort) from [<c030bc60>] (__dabt_svc+0x40/0x60) [ 49.957981] Exception stack(0xee4faf38 to 0xee4faf80) [ 49.963264] af20: ee482200 00000000 [ 49.971827] af40: ffffffff 00000000 ee482200 00000000 c1035a08 00000000 ee48242c c0a8ec30 [ 49.980386] af60: c034de42 ee4fafcc ee483338 ee4faf88 c0349ab4 c034de40 20000193 ffffffff [ 49.988951] [<c030bc60>] (__dabt_svc) from [<c034de40>] (kthread_data+0x4/0xc) [ 49.996515] [<c034de40>] (kthread_data) from [<c0349ab4>] (wq_worker_sleeping+0x8/0xb8) [ 50.004893] [<c0349ab4>] (wq_worker_sleeping) from [<c0a8ea98>] (__schedule+0x31c/0x470) [ 50.013369] [<c0a8ea98>] (__schedule) from [<c0a8ec30>] (schedule+0x44/0x9c) [ 50.020748] [<c0a8ec30>] (schedule) from [<c0337640>] (do_exit+0x7b4/0x908) [ 50.028038] [<c0337640>] (do_exit) from [<c030b5c4>] (die+0x328/0x394) [ 50.034872] [<c030b5c4>] (die) from [<c031a290>] (__do_kernel_fault.part.0+0x64/0x1e4) [ 50.043162] [<c031a290>] (__do_kernel_fault.part.0) from [<c0315580>] (do_page_fault+0x370/0x384) [ 50.0524 [PYBOOT] [omap5uevm 01:42]: got exception: panic ~$off
[PYBOOT] [omap5uevm 01:43]: Done. Board seaboard-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.657013] vdd_ldo7,avdd_hdmi,vdd_fuse: supplied by vdd_sm2,vin_ldo* [ 1.667423] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 1.673911] tegra-ehci c5000000.usb: EHCI Host Controller [ 1.679330] tegra-ehci c5000000.usb: new USB bus registered, assigned bus number 3 [ 1.687770] tegra-ehci c5000000.usb: irq 287, io mem 0xc5000000 [ 1.703562] tegra-ehci c5000000.usb: USB 2.0 started, EHCI 1.00 [ 1.710546] hub 3-0:1.0: USB hub found [ 1.715001] hub 3-0:1.0: 1 port detected [ 1.720053] mmc2: switch to bus width 8 failed [ 1.727067] mmc2: switch to bus width 4 failed [ 1.731584] mmc2: new high speed MMC card at address 0001 [ 1.738131] mmcblk2: mmc2:0001 MMC08G 7.46 GiB [ 1.743198] mmcblk2boot0: mmc2:0001 MMC08G partition 1 512 KiB [ 1.749385] mmcblk2boot1: mmc2:0001 MMC08G partition 2 512 KiB [ 1.750632] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.750635] [drm] No driver support for vblank timestamp query. [ 1.769243] mmcblk2: p3 [ 1.789655] mmc0: queuing unknown CIS tuple 0x80 (50 bytes) [ 1.803355] mmc0: queuing unknown CIS tuple 0x80 (7 bytes) [ 1.817209] mmc0: queuing unknown CIS tuple 0x80 (7 bytes) [ 1.824563] mmc0: queuing unknown CIS tuple 0x80 (19 bytes) [ 1.843744] mmc0: queuing unknown CIS tuple 0x02 (1 bytes) [ 1.848106] mmc0: new SDIO card at address 0001 [ 1.868890] Console: switching to colour frame buffer device 170x48 [ 1.918538] drm drm: fb0: frame buffer device [ 1.933550] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 1.940323] input: gpio-keys as /devices/soc0/gpio-keys/input/input2 [ 1.969331] tps6586x-rtc tps6586x-rtc: setting system clock to 2009-01-01 00:00:00 UTC (1230768000) [ 1.983633] vdd_1v5: disabling [ 1.986687] vdd_1v2: disabling [ 2.556865] asix 2-1:1.0 eth0: register 'asix' at usb-c5008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, c0:c1:c0:13:08:60 [ 2.568312] Waiting for root device /dev/mmcblk0p3... [ 58.593140] random: nonblocking pool is initialized
[PYBOOT] [seaboard 02:05]: Timed out waiting for "<type 'str'>":
[PYBOOT] [seaboard 02:06]: got exception: timeout ~$off
[PYBOOT] [seaboard 02:07]: Done. Board seaboard-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
[ 1.606936] vdd_ldo8,avdd_hdmi_pll: supplied by vdd_sm2,vin_ldo* [ 1.613269] vdd_ldo7,avdd_hdmi,vdd_fuse: supplied by vdd_sm2,vin_ldo* [ 1.623180] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 1.629629] tegra-ehci c5000000.usb: EHCI Host Controller [ 1.635041] tegra-ehci c5000000.usb: new USB bus registered, assigned bus number 3 [ 1.642798] tegra-ehci c5000000.usb: irq 287, io mem 0xc5000000 [ 1.658114] tegra-ehci c5000000.usb: USB 2.0 started, EHCI 1.00 [ 1.664574] hub 3-0:1.0: USB hub found [ 1.668379] hub 3-0:1.0: 1 port detected [ 1.678770] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.685400] [drm] No driver support for vblank timestamp query. [ 1.716305] mmc0: queuing unknown CIS tuple 0x80 (50 bytes) [ 1.722785] mmc2: switch to bus width 8 failed [ 1.723009] mmc2: switch to bus width 4 failed [ 1.723019] mmc2: new high speed MMC card at address 0001 [ 1.723354] mmcblk2: mmc2:0001 MMC08G 7.46 GiB [ 1.723465] mmcblk2boot0: mmc2:0001 MMC08G partition 1 512 KiB [ 1.723582] mmcblk2boot1: mmc2:0001 MMC08G partition 2 512 KiB [ 1.724071] mmc0: queuing unknown CIS tuple 0x80 (7 bytes) [ 1.724692] mmcblk2: p3 [ 1.727043] mmc0: queuing unknown CIS tuple 0x80 (7 bytes) [ 1.734012] mmc0: queuing unknown CIS tuple 0x80 (19 bytes) [ 1.752169] mmc0: queuing unknown CIS tuple 0x02 (1 bytes) [ 1.755186] mmc0: new SDIO card at address 0001 [ 1.769113] Console: switching to colour frame buffer device 170x48 [ 1.851899] drm drm: fb0: frame buffer device [ 1.856338] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 1.862682] input: gpio-keys as /devices/soc0/gpio-keys/input/input2 [ 1.869551] tps6586x-rtc tps6586x-rtc: setting system clock to 2009-01-01 00:00:00 UTC (1230768000) [ 1.881132] vdd_1v5: disabling [ 1.884195] vdd_1v2: disabling [ 2.521688] asix 2-1:1.0 eth0: register 'asix' at usb-c5008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, c0:c1:c0:13:08:60 [ 2.532534] Waiting for root device /dev/mmcblk0p3...
[PYBOOT] [seaboard 01:50]: Timed out waiting for "<type 'str'>":
[PYBOOT] [seaboard 01:51]: got exception: timeout ~$off
[PYBOOT] [seaboard 01:53]: Done. Board seaboard-arm-tegra_defconfig failure log: -------------------------------------------------
[ 1.631608] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 1.631640] Bluetooth: BNEP socket layer initialized [ 1.631653] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 1.631683] Bluetooth: HIDP socket layer initialized [ 1.632440] Key type dns_resolver registered [ 1.633657] Registering SWP/SWPB emulation handler [ 1.662965] tegra-dc 54200000.dc: failed to probe RGB output: -517 [ 1.663523] VDDIO_HDMI: supplied by vdd_5v0 [ 1.663793] vdd_sys: supplied by vdd_5v0 [ 1.663891] vdd_sm2,vin_ldo*: supplied by vdd_sys [ 1.664182] vdd_ldo8,avdd_hdmi_pll: supplied by vdd_sm2,vin_ldo* [ 1.664749] vdd_ldo7,avdd_hdmi,vdd_fuse: supplied by vdd_sm2,vin_ldo* [ 1.668808] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 1.668839] tegra-ehci c5000000.usb: EHCI Host Controller [ 1.668908] tegra-ehci c5000000.usb: new USB bus registered, assigned bus number 3 [ 1.669446] tegra-ehci c5000000.usb: irq 287, io mem 0xc5000000 [ 1.691423] tegra-ehci c5000000.usb: USB 2.0 started, EHCI 1.00 [ 1.694536] hub 3-0:1.0: USB hub found [ 1.694599] hub 3-0:1.0: 1 port detected [ 1.703521] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.703524] [drm] No driver support for vblank timestamp query. [ 1.789682] mmc0: new SDIO card at address 0001 [ 1.827725] Console: switching to colour frame buffer device 170x48 [ 1.852034] drm drm: fb0: frame buffer device [ 1.881416] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 1.888690] input: gpio-keys as /devices/soc0/gpio-keys/input/input4 [ 1.896995] tps6586x-rtc tps6586x-rtc: setting system clock to 2009-01-01 00:00:00 UTC (1230768000) [ 1.938937] vdd_1v5: disabling [ 1.942012] vdd_1v2: disabling [ 1.945188] ALSA device list: [ 1.948156] #0: NVIDIA Tegra Seaboard [ 2.302417] asix 2-1:1.0 eth0: register 'asix' at usb-c5008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, c0:c1:c0:13:08:60 [ 2.313690] Waiting for root device /dev/mmcblk0p3...
[PYBOOT] [seaboard 01:47]: Timed out waiting for "<type 'str'>":
[PYBOOT] [seaboard 01:48]: got exception: timeout ~$off
[PYBOOT] [seaboard 01:50]: Done. Board snow-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
[....] Waiting for /dev to be fully populated...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Activating swap...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [ 3.134864] EXT4-fs (mmcblk0p3): warning: mounting fs with errors, running e2fsck is recommended [ 3.143219] EXT4-fs (mmcblk0p3): re-mounted. Opts: (null) [....] Cleaning up temporary files... /tmp[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] Activating lvm and md swap...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Checking file systems...fsck from util-linux 2.20.1 [?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Mounting local filesystems...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Activating swapfile swap...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Cleaning up temporary files...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] Setting kernel variables ...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [ 4.184734] random: dd urandom read with 58 bits of entropy available [....] Configuring network interfaces...Internet Systems Consortium DHCP Client 4.2.2 Copyright 2004-2011 Internet Systems Consortium. All rights reserved. For info, please visit https://www.isc.org/software/dhcp/
Cannot find device "eth0" Bind socket to interface: No such device Failed to bring up eth0. [?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Cleaning up temporary files...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. INIT: Entering runlevel: 2 [[36minfo[39;49m] Using makefile-style concurrent boot in runlevel 2. [....] Starting enhanced syslogd: rsyslogd[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] Starting web server: apache2apache2: Could not reliably determine the server's fully qualified domain name, using 127.0.0.1 for ServerName [?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] Starting periodic command scheduler: cron[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] Loading cpufreq kernel modules...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone (none). [....] Starting system message bus: dbus[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] CPUFreq Utilities: Setting ondemand CPUFreq governor...CPU0...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Starting OpenBSD Secure Shell server: sshd[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c.
[PYBOOT] [snow 03:11]: Timed out waiting for "<type 'str'>":
[PYBOOT] [snow 03:12]: got exception: timeout ~$off
[PYBOOT] [snow 03:13]: Done. Board snowball-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.948974] can: controller area network core (rev 20120528 abi 9) [ 1.955230] NET: Registered protocol family 29 [ 1.959686] can: raw protocol (rev 20120528) [ 1.963989] can: broadcast manager protocol (rev 20120528 t) [ 1.969665] can: netlink gateway (rev 20130117) max_hops=1 [ 1.975708] Key type dns_resolver registered [ 1.980224] ThumbEE CPU extension supported. [ 1.984527] Registering SWP/SWPB emulation handler [ 1.995330] input: gpio_keys as /devices/soc0/gpio_keys/input/input0 [ 2.002197] rtc-pl031 80154000.rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 2.011413] thermal cooling_device0: thermal-cpufreq-0 bind to 0: 0-succeed [ 2.018432] thermal cooling_device0: thermal-cpufreq-0 bind to 1: 0-succeed [ 2.025451] thermal cooling_device0: thermal-cpufreq-0 bind to 2: 0-succeed [ 2.032440] db8500-cpufreq-cooling soc:cpufreq-cooling: Cooling device registered: thermal-cpufreq-0 [ 2.046386] db8500-esram12: disabling [ 2.050140] db8500-esram34: disabling [ 2.054199] V-CSI/DSI: disabling [ 2.057464] mmci-reg: disabling [ 2.061218] uart-pl011 80007000.uart: DMA channel TX dma0chan20 [ 2.067199] uart-pl011 80007000.uart: DMA channel RX dma0chan21 [ 2.073669] Waiting for root device /dev/mmcblk0p4... [ 2.112670] mmc3: new high speed MMC card at address 0001 [ 2.118652] mmcblk3: mmc3:0001 3.53 GiB [ 2.122924] mmcblk3boot0: mmc3:0001 partition 1 2.00 MiB [ 2.128570] mmcblk3boot1: mmc3:0001 partition 2 2.00 MiB [ 2.134216] mmcblk3rpmb: mmc3:0001 partition 3 128 KiB [ 2.140716] mmcblk3: p1 p2 p3 p4 Connected. cu: Got hangup signal cu: waitpid: No child processes Connected.
Disconnected.
[PYBOOT] [snowball 02:20]: Timed out waiting for "<type 'str'>":
[PYBOOT] [snowball 02:21]: got exception: timeout ~$off
[PYBOOT] [snowball 02:22]: Done. Board snowball-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
[ 1.898101] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.905609] ledtrig-cpu: registered to indicate activity on CPUs [ 1.911834] usbcore: registered new interface driver usbhid [ 1.917419] usbhid: USB HID core driver [ 1.924713] NET: Registered protocol family 10 [ 1.980041] sit: IPv6 over IPv4 tunneling driver [ 1.985198] NET: Registered protocol family 17 [ 1.989654] can: controller area network core (rev 20120528 abi 9) [ 1.995910] NET: Registered protocol family 29 [ 2.000366] can: raw protocol (rev 20120528) [ 2.004638] can: broadcast manager protocol (rev 20120528 t) [ 2.010284] can: netlink gateway (rev 20130117) max_hops=1 [ 2.016204] Key type dns_resolver registered [ 2.020660] ThumbEE CPU extension supported. [ 2.075012] input: gpio_keys as /devices/soc0/gpio_keys/input/input0 [ 2.089691] rtc-pl031 80154000.rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 2.098754] thermal cooling_device0: thermal-cpufreq-0 bind to 0: 0-succeed [ 2.105773] thermal cooling_device0: thermal-cpufreq-0 bind to 1: 0-succeed [ 2.112731] thermal cooling_device0: thermal-cpufreq-0 bind to 2: 0-succeed [ 2.119720] db8500-cpufreq-cooling soc:cpufreq-cooling: Cooling device registered: thermal-cpufreq-0 [ 2.131378] db8500-esram12: disabling [ 2.179168] db8500-esram34: disabling [ 2.208923] V-CSI/DSI: disabling [ 2.213134] mmci-reg: disabling [ 2.224761] uart-pl011 80007000.uart: DMA channel TX dma0chan20 [ 2.230712] uart-pl011 80007000.uart: DMA channel RX dma0chan21 [ 2.244873] Waiting for root device /dev/mmcblk0p4... [ 3.041931] mmc3: new high speed MMC card at address 0001 [ 3.054748] mmcblk3: mmc3:0001 3.53 GiB [ 3.058898] mmcblk3boot0: mmc3:0001 partition 1 2.00 MiB [ 3.074401] mmcblk3boot1: mmc3:0001 partition 2 2.00 MiB [ 3.083923] mmcblk3rpmb: mmc3:0001 partition 3 128 KiB [ 3.095764] mmcblk3: p1 p2 p3 p4
[PYBOOT] [snowball 01:58]: Timed out waiting for "<type 'str'>":
[PYBOOT] [snowball 01:59]: got exception: timeout ~$off
[PYBOOT] [snowball 02:00]: Done. Board snowball-arm-u8500_defconfig failure log: -------------------------------------------------
[ 2.746917] ux500-msp-i2s ux500-msp-i2s.1: Failed to get DMA channel capabilities, falling back to period counting: -6 [ 2.757934] snd-soc-mop500 snd-soc-mop500.0: ab8500-codec-dai.0 <-> ux500-msp-i2s.1 mapping ok [ 2.774780] ux500-msp-i2s ux500-msp-i2s.3: Failed to get DMA channel capabilities, falling back to period counting: -6 [ 2.785614] snd-soc-mop500 snd-soc-mop500.0: ab8500-codec-dai.1 <-> ux500-msp-i2s.3 mapping ok [ 2.822845] NET: Registered protocol family 10 [ 2.830474] sit: IPv6 over IPv4 tunneling driver [ 2.837890] NET: Registered protocol family 17 [ 2.842956] NET: Registered protocol family 35 [ 2.847686] NET: Registered protocol family 37 [ 2.852691] Registering SWP/SWPB emulation handler [ 2.869567] coresight-etm3x 801ae000.ptm: PTM 1.0 initialized [ 2.875915] coresight-etm3x 801af000.ptm: PTM 1.0 initialized [ 2.882690] input: gpio_keys as /devices/soc0/gpio_keys/input/input1 [ 2.889739] ab8500-rtc ab8500-rtc.0: setting system clock to 2000-04-15 15:19:28 UTC (955811968) [ 2.898986] thermal cooling_device0: thermal-cpufreq-0 bind to 0: 0-succeed [ 2.906158] thermal cooling_device0: thermal-cpufreq-0 bind to 1: 0-succeed [ 2.913177] thermal cooling_device0: thermal-cpufreq-0 bind to 2: 0-succeed [ 2.920196] db8500-cpufreq-cooling soc:cpufreq-cooling: Cooling device registered: thermal-cpufreq-0 [ 2.933624] db8500-esram12: disabling [ 2.937469] db8500-esram34: disabling [ 2.941436] V-CSI/DSI: disabling [ 2.944702] mmci-reg: disabling [ 2.947998] ALSA device list: [ 2.951019] #0: MOP500-card [ 2.954345] uart-pl011 80007000.uart: DMA channel TX dma0chan24 [ 2.960357] uart-pl011 80007000.uart: DMA channel RX dma0chan25 [ 2.966583] Waiting for root device /dev/mmcblk0p4... cu: Got hangup signal Connected. cu: waitpid: No child processes Connected.
Disconnected.
[PYBOOT] [snowball 01:53]: Timed out waiting for "<type 'str'>":
[PYBOOT] [snowball 01:54]: got exception: timeout ~$off
[PYBOOT] [snowball 01:56]: Done. Board wandboard-arm-imx_v6_v7_defconfig failure log: -------------------------------------------------
[ 20.120219] mmcblk0: error -110 sending status command, retrying [ 20.128678] mmcblk0: error -110 sending status command, aborting INIT: cannot execute "/sbin/gett[ 20.139941] mmcblk0: error -110 sending status command, retrying y" INIT: Id "S1" respawning to[ 20.148744] mmcblk0: error -110 sending status command, retrying o fast: disabled for 5 minutes [ 20.157616] mmcblk0: error -110 sending status command, aborting INIT: cannot execute "/sbin/getty" INIT: cannot execute "/sbin/getty" INIT: INIT: cannot execute "/sbin/getty" INIT: cannot [ 20.177999] mmcblk0: error -110 sending status command, retrying execute "/sbin/getty" cannot ex[ 20.186813] mmcblk0: error -110 sending status command, retrying ecute "/sbin/getty"INIT: cann[ 20.195714] mmcblk0: error -110 sending status command, aborting ot execute "/sbin/getty"Id "1" respawning too fast: disabled for [ 20.207159] mmcblk0: error -110 sending status command, retrying 5 minutes
INIT: Id "5" resp[ 20.216215] mmcblk0: error -110 sending status command, retrying awning too fast: disabled for 5 m[ 20.225096] mmcblk0: error -110 sending status command, aborting inutes INIT: Id "6" respawning too fast: disabled for 5 minutes INIT: Id "2" respawning too fast: disabled for 5 minutes INIT: INIT: cannot execute "/sbin/getty"
INIT: Id "4" respawning too fast: disabled for 5 minutes [ 20.341780] mmcblk0: error -110 sending status command, retrying [ 20.350289] mmcblk0: error -110 sending status command, retrying [ 20.358786] mmcblk0: error -110 sending status command, aborting INIT: cannot execute "/sbin/getty" INIT: Id "3" respawning too fast: disabled for 5 minutes INIT: no more processes left in this runlevel [ 54.727186] random: nonblocking pool is initialized
[PYBOOT] [wandboard 02:55]: Timed out waiting for "<type 'str'>":
[PYBOOT] [wandboard 02:56]: got exception: timeout ~$off
[PYBOOT] [wandboard 02:57]: Done.