Failed boards:
snowball u8500_defconfig : FAILED 3:16.30 snowball multi_v7_defconfig : FAILED 1:16.72
Successful boards:
Offline boards:
apc vt8500_v6_v7_defconfig : OFFLINE 1:06.17 arndale exynos_defconfig : OFFLINE 1:05.59 bbb omap2plus_defconfig : OFFLINE 1:03.71 bbb multi_v7_defconfig : OFFLINE 1:03.72 beaver tegra_defconfig : OFFLINE 1:03.72 beaver multi_v7_defconfig : OFFLINE 1:03.73 capri bcm_defconfig : OFFLINE 1:03.68 capri multi_v7_defconfig : OFFLINE 1:03.73 cubie sunxi_defconfig : OFFLINE 1:03.71 cubie multi_v7_defconfig : OFFLINE 1:03.70 cubie2 sunxi_defconfig : OFFLINE 1:03.77 cubie2 multi_v7_defconfig : OFFLINE 1:03.73 cubie2 multi_lpae_defconfig : OFFLINE 1:03.77 dalmore tegra_defconfig : OFFLINE 1:03.71 dalmore multi_v7_defconfig : OFFLINE 1:03.74 dalmore multi_lpae_defconfig : OFFLINE 1:03.76 hummingboard imx_v6_v7_defconfig : OFFLINE 1:03.76 hummingboard multi_v7_defconfig : OFFLINE 1:03.69 omap5uevm omap2plus_defconfig : OFFLINE 1:03.72 omap5uevm multi_v7_defconfig : OFFLINE 1:03.74 omap5uevm multi_lpae_defconfig : OFFLINE 1:03.67 panda omap2plus_defconfig : OFFLINE 1:06.28 panda multi_v7_defconfig : OFFLINE 1:05.82 sama5 sama5_defconfig : OFFLINE 1:05.44 seaboard tegra_defconfig : OFFLINE 1:03.72 seaboard multi_v7_defconfig : OFFLINE 1:03.71 snow exynos_defconfig : OFFLINE 1:05.64 trimslice tegra_defconfig : OFFLINE 1:03.70 trimslice multi_v7_defconfig : OFFLINE 1:03.72 wandboard imx_v6_v7_defconfig : OFFLINE 1:03.70 wandboard multi_v7_defconfig : OFFLINE 1:03.71
Board legend is available at http://arm-soc.lixom.net/boards.html
Last entries of failed logs below:
========================================================================
Board snowball-multi_v7_defconfig failure log: -------------------------------------------------
*** Unhandled DHCP Option in OFFER/ACK: 28 *** Unhandled DHCP Option in OFFER/ACK: 28 DHCP client bound to address 172.16.1.128 U8500 $ setenv serverip 172.16.1.3 setenv serverip 172.16.1.3node: snowball status: on
U8500 $ tftp 0x00100000 tmp/snowball-Sb2eyW/tmpMkgL7O-uImage tftp 0x00100000 tmp/snowball-Sb2eyW/tmpMkgL7O-uImage smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC 08:00:08:1e:0f:44 Using smc911x-0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.128 Filename 'tmp/snowball-Sb2eyW/tmpMkgL7O-uImage'. Load address: 0x100000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ####################################################### done Bytes transferred = 4619577 (467d39 hex) U8500 $ printenv bootargs printenv bootargs bootargs=console=ttyAMA2,115200 root=/dev/mmcblk0p4 rootwait rw debug earlyprintk U8500 $ bootm 0x00100000 bootm 0x00100000 ## Booting kernel from Legacy Image at 00100000 ... Image Name: Linux Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 4619513 Bytes = 4.4 MB Load Address: 00008000 Entry Point: 00008000 Loading Kernel Image ... OK OK
Starting kernel ...
~$off # PYBOOT: Exception: timeout
========================================================================
Board snowball-u8500_defconfig failure log: -------------------------------------------------
[ 18.389343] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 2 [ 18.398345] Registering SWP/SWPB emulation handler [ 18.419219] l2x0-prefetch: initialized. [ 18.434204] mcde_display_hdmi_init [ 18.440307] regulator_init_complete: LDO-USB: disabling [ 18.446289] regulator_init_complete: db8500-esram34: disabling [ 18.452209] regulator_init_complete: db8500-esram12: disabling [ 18.458740] ab8500-rtc ab8500-rtc.0: setting system clock to 2014-03-27 03:00:29 UTC (1395889229) [ 18.991088] net eth0: SMSC911x/921x identified at 0xe08c0000, IRQ: 300 [ 19.973297] av8100_hdmi av8100_hdmi.1: HDMI display probed [ 20.001342] Sending DHCP requests . [ 20.071838] av8100 0-0070: chip version:2 [ 21.068237] Console: switching to colour frame buffer device 160x45 [ 21.152770] av8100_hdmi av8100_hdmi.1: Framebuffer created (av8100_hdmi) [ 22.501403] .node: snowball status: on ., OK [ 29.951416] IP-Config: Got DHCP answer from 172.16.1.7, my address is 172.16.1.119 [ 29.961059] IP-Config: Complete: [ 29.964538] device=eth0, addr=172.16.1.119, mask=255.255.255.0, gw=172.16.1.1, [ 29.972167] host=172.16.1.119, domain=lixom.net, nis-domain=(none), [ 29.978973] bootserver=172.16.1.7, rootserver=172.16.1.7, rootpath= [ 29.988159] EXT3-fs (mmcblk0p3): error: couldn't mount because of unsupported optional features (240) [ 30.223297] EXT2-fs (mmcblk0p3): error: couldn't mount because of unsupported optional features (244) [ 30.414550] EXT4-fs (mmcblk0p3): warning: maximal mount count reached, running e2fsck is recommended [ 30.428588] EXT4-fs (mmcblk0p3): recovery complete [ 30.437133] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: (null) [ 30.445404] VFS: Mounted root (ext4 filesystem) on device 179:3. [ 30.455505] devtmpfs: mounted [ 30.458709] Freeing init memory: 216K
Last login: Wed Mar 26 07:38:42 UTC 2014 on tty1 Welcome to Linaro 11.09 (development branch) (GNU/Linux 2.6.38-1001-ux500 armv7l)
* Documentation: https://wiki.linaro.org/ root@linaro-nano:~# root root -bash: root: command not found root@linaro-nano:~# node: snowball status: on ~$off # PYBOOT: Exception: timeout