Failed boards:
cubie2 sunxi_defconfig : FAILED 1:20.72 hummingboard multi_v7_defconfig : FAILED 1:04.66 panda multi_v7_defconfig : FAILED 1:36.13 snowball multi_v7_defconfig : FAILED 1:13.33 wandboard multi_v7_defconfig : FAILED 1:03.73
Successful boards:
apc vt8500_v6_v7_defconfig : passed 1:19.42 arndale exynos_defconfig : passed 1:11.87 bbb omap2plus_defconfig : passed 1:42.18 bbb multi_v7_defconfig : passed 1:19.92 beaver tegra_defconfig : passed 0:55.90 beaver multi_v7_defconfig : passed 0:47.47 capri bcm_defconfig : passed 0:46.07 capri multi_v7_defconfig : passed 0:44.10 cubie sunxi_defconfig : passed 0:52.92 cubie multi_v7_defconfig : passed 0:59.36 cubie2 multi_v7_defconfig : passed 1:02.06 cubie2 multi_lpae_defconfig : passed 0:51.29 dalmore tegra_defconfig : passed 1:19.83 dalmore multi_v7_defconfig : passed 1:15.50 dalmore multi_lpae_defconfig : passed 1:16.91 hummingboard imx_v6_v7_defconfig : passed 1:23.67 omap5uevm omap2plus_defconfig : warnings 1:03.83 omap5uevm multi_v7_defconfig : warnings 1:41.24 omap5uevm multi_lpae_defconfig : warnings 1:38.53 panda omap2plus_defconfig : warnings 1:14.19 sama5 sama5_defconfig : passed 1:59.50 seaboard tegra_defconfig : passed 1:04.55 seaboard multi_v7_defconfig : passed 1:07.14 snow exynos_defconfig : passed 1:32.08 snowball u8500_defconfig : passed 1:40.75 trimslice tegra_defconfig : passed 1:02.08 trimslice multi_v7_defconfig : passed 1:04.64 wandboard imx_v6_v7_defconfig : passed 0:59.17
Offline boards:
Board legend is available at http://arm-soc.lixom.net/boards.html
Last entries of failed logs below:
========================================================================
Board cubie2-sunxi_defconfig failure log: -------------------------------------------------
[ 0.017830] platform ahci-5v.2: Driver reg-fixed-voltage requests probe deferral [ 0.017853] reg-fixed-voltage usb1-vbus.3: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/usb1_vbus_pin@0, deferring probe [ 0.017867] platform usb1-vbus.3: Driver reg-fixed-voltage requests probe deferral [ 0.017889] reg-fixed-voltage usb2-vbus.4: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/usb2_vbus_pin@0, deferring probe [ 0.017902] platform usb2-vbus.4: Driver reg-fixed-voltage requests probe deferral [ 0.018844] Switched to clocksource arch_sys_counter [ 0.025950] NET: Registered protocol family 2 [ 0.026420] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.026508] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.026629] TCP: Hash tables configured (established 8192 bind 8192) [ 0.026714] TCP: reno registered [ 0.026728] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.026784] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.026986] NET: Registered protocol family 1 [ 0.027385] RPC: Registered named UNIX socket transport module. [ 0.027399] RPC: Registered udp transport module. [ 0.027405] RPC: Registered tcp transport module. [ 0.027411] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.028380] futex hash table entries: 512 (order: 3, 32768 bytes) [ 0.028946] bounce pool size: 64 pages [ 0.036731] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.036748] io scheduler noop registered [ 0.036755] io scheduler deadline registered [ 0.036940] io scheduler cfq registered (default) [ 0.038581] sunxi-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver [ 0.080430] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled [ 0.082866] console [ttyS0] disabled [ 0.103071] 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 33, base_baud = 1500000) is a U6_16550A [ 0.618073] console [ttyS0] enabled [ 0.622789] mousedev: PS/2 mouse device common for all mice [ 0.628614] i2c /dev entries driver [ 0.633491] sunxi-wdt 1c20c90.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0) [ 0.642490] TCP: cubic registered [ 0.645813] NET: Registered protocol family 17 [ 0.650374] Registering SWP/SWPB emulation handler [ 0.656082] ahci-5v: 5000 mV [ 0.659375] usb1-vbus: 5000 mV [ 0.662737] usb2-vbus: 5000 mV ~$off # PYBOOT: Exception: timeout
========================================================================
Board hummingboard-multi_v7_defconfig failure log: -------------------------------------------------
C1 U-Boot > tftp 0x10800000 next/next-20140409/multi_v7_defconfig/zImage tftp 0x10800000 next/next-20140409/multi_v7_defconfig/zImage Using FEC device TFTP from server 172.16.1.3; our IP address is 172.16.1.111 Filename 'next/next-20140409/multi_v7_defconfig/zImage'. Load address: 0x10800000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ######################################################## 2 MiB/s done Bytes transferred = 4631744 (46acc0 hex) C1 U-Boot >setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 C1 U-Boot > tftp 0x11000000 next/next-20140409/multi_v7_defconfig/dtbs/imx6dl-hummingboard.dtb tftp 0x11000000 next/next-20140409/multi_v7_defconfig/dtbs/imx6dl-hummingboard.dtb Using FEC device TFTP from server 172.16.1.3; our IP address is 172.16.1.111 Filename 'next/next-20140409/multi_v7_defconfig/dtbs/imx6dl-hummingboard.dtb'. Load address: 0x11000000 Loading: *## 745.1 KiB/s done Bytes transferred = 25956 (6564 hex) C1 U-Boot > printenv bootargs printenv bootargs bootargs=console=ttymxc0,115200 root=/dev/mmcblk0p2 rootwait debug earlyprintk C1 U-Boot > bootz 0x10800000 - 0x11000000 bootz 0x10800000 - 0x11000000 Kernel image @ 0x10800000 [ 0x000000 - 0x46acc0 ] ## Flattened Device Tree blob at 11000000 Booting using the fdt blob at 0x11000000 Using Device Tree in place at 11000000, end 11009563
Starting kernel ...
~$off # PYBOOT: Exception: timeout
========================================================================
Board panda-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.617340] omap_hsmmc 4809c000.mmc: unable to get vmmc regulator -517 [ 1.624237] platform 4809c000.mmc: Driver omap_hsmmc requests probe deferral [ 1.631927] omap_hsmmc 480d5000.mmc: unable to get vmmc regulator -517 [ 1.638824] platform 480d5000.mmc: Driver omap_hsmmc requests probe deferral [ 1.646728] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.653594] usbcore: registered new interface driver usbhid [ 1.659454] usbhid: USB HID core driver [ 1.667358] TCP: cubic registered [ 1.670867] NET: Registered protocol family 17 [ 1.675720] Key type dns_resolver registered [ 1.680664] Power Management for TI OMAP4+ devices. [ 1.685821] Power Management for TI OMAP4. [ 1.690124] OMAP4 PM: u-boot >= v2012.07 is required for full PM support [ 1.697265] Registering SWP/SWPB emulation handler [ 1.703277] vwl1271: 1800 mV [ 1.707733] Skipping twl internal clock init and using bootloader value (unknown osc rate) [ 1.717651] twl 0-0048: PIH (irq 39) nested IRQs [ 1.723327] twl_rtc rtc.15: Power up reset detected. [ 1.729187] twl_rtc rtc.15: Enabling TWL-RTC [ 1.736145] twl_rtc rtc.15: rtc core: registered rtc.15 as rtc0 [ 1.743103] VAUX1_6030: 1000 <--> 3000 mV at 2800 mV [ 1.749176] VAUX2_6030: 1200 <--> 2800 mV at 1800 mV [ 1.755279] VAUX3_6030: 1000 <--> 3000 mV at 1200 mV [ 1.761444] VMMC: 1200 <--> 3000 mV at 3000 mV [ 1.766937] VPP: 1800 <--> 2500 mV at 1900 mV [ 1.772399] VUSIM: 1200 <--> 2900 mV at 1800 mV [ 1.777404] VDAC: 1800 mV [ 1.781158] VANA: 2100 mV [ 1.784698] VCXIO: 1800 mV [ 1.784698] VUSB: 3300 mV [ 1.791656] V1V8: 1800 mV [ 1.795196] V2V1: 2100 mV [ 1.879302] usb 1-1: new high-speed USB device number 2 using ehci-omap [ 2.049896] hub 1-1:1.0: USB hub found [ 2.053985] hub 1-1:1.0: 5 ports detected [ 2.356109] usb 1-1.1: new high-speed USB device number 3 using ehci-omap [ 2.671478] smsc95xx v1.0.4 [ 2.744995] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-4a064c00.ehci-1.1, smsc95xx USB 2.0 Ethernet, 86:25:f9:08:f1:7b ~$off # PYBOOT: Exception: timeout
========================================================================
Board snowball-multi_v7_defconfig failure log: -------------------------------------------------
BOOTP broadcast 1 *** Unhandled DHCP Option in OFFER/ACK: 28 *** Unhandled DHCP Option in OFFER/ACK: 28 DHCP client bound to address 172.16.1.157 U8500 $ setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 U8500 $ tftp 0x00100000 tmp/snowball-kbfD_h/tmp0N8RpD-uImage tftp 0x00100000 tmp/snowball-kbfD_h/tmp0N8RpD-uImage smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC 08:00:08:1e:0f:44 Using smc911x-0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.157 Filename 'tmp/snowball-kbfD_h/tmp0N8RpD-uImage'. Load address: 0x100000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ########################################################### done Bytes transferred = 4673057 (474e21 hex) U8500 $ printenv bootargs printenv bootargs bootargs=console=ttyAMA2,115200 root=/dev/mmcblk0p4 rootwait rw debug earlyprintk U8500 $ bootm 0x00100000 bootm 0x00100000 ## Booting kernel from Legacy Image at 00100000 ... Image Name: Linux Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 4672993 Bytes = 4.5 MB Load Address: 00008000 Entry Point: 00008000 Loading Kernel Image ... OK OK
Starting kernel ...
~$off # PYBOOT: Exception: timeout
========================================================================
Board wandboard-multi_v7_defconfig failure log: -------------------------------------------------
=> tftp 0x10800000 next/next-20140409/multi_v7_defconfig/zImage tftp 0x10800000 next/next-20140409/multi_v7_defconfig/zImage Using FEC device TFTP from server 172.16.1.3; our IP address is 172.16.1.110 Filename 'next/next-20140409/multi_v7_defconfig/zImage'. Load address: 0x10800000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ######################################################## 6.1 MiB/s done Bytes transferred = 4631744 (46acc0 hex) => setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 => tftp 0x11000000 next/next-20140409/multi_v7_defconfig/dtbs/imx6q-wandboard.dtb tftp 0x11000000 next/next-20140409/multi_v7_defconfig/dtbs/imx6q-wandboard.dtb Using FEC device TFTP from server 172.16.1.3; our IP address is 172.16.1.110 Filename 'next/next-20140409/multi_v7_defconfig/dtbs/imx6q-wandboard.dtb'. Load address: 0x11000000 Loading: *### 1.1 MiB/s done Bytes transferred = 29394 (72d2 hex) => printenv bootargs printenv bootargs bootargs=console=ttymxc0,115200 root=/dev/mmcblk0p2 rootwait debug => bootz 0x10800000 - 0x11000000 bootz 0x10800000 - 0x11000000 Kernel image @ 0x10800000 [ 0x000000 - 0x46acc0 ] ## Flattened Device Tree blob at 11000000 Booting using the fdt blob at 0x11000000 Using Device Tree in place at 11000000, end 1100a2d1
Starting kernel ...
~$off # PYBOOT: Exception: timeout