Full logs are available at http://arm-soc.lixom.net/bootlogs/mainline/v4.6-rc7-183-g1410b74/
Failed boards:
arndale multi_v7_nosmp_defconfig : NO BUILD bbb arm-omap2plus_defconfig : FAILED 1:55.57 bbb arm-multi_v7_defconfig : FAILED 1:57.40 bbb multi_v7_nosmp_defconfig : NO BUILD beagleboard-x15 arm-omap2plus_defconfig : FAILED 1:44.19 beagleboard-x15 arm-multi_v7_defconfig : FAILED 1:43.84 beagleboard-x15 arm-multi_lpae_defconfig : FAILED 1:49.17 beagleboard-x15 multi_v7_nosmp_defconfig : NO BUILD beaver multi_v7_nosmp_defconfig : NO BUILD capri multi_v7_nosmp_defconfig : NO BUILD chitra powerpc-pasemi_defconfig : BUILD FAILED colibri-vf61 multi_v7_nosmp_defconfig : NO BUILD colombus multi_v7_nosmp_defconfig : NO BUILD cosmic arm-imx_v6_v7_defconfig : FAILED 2:01.19 cosmic arm-multi_v7_defconfig : FAILED 2:07.13 cosmic multi_v7_nosmp_defconfig : NO BUILD cubie multi_v7_nosmp_defconfig : NO BUILD cubie2 multi_v7_nosmp_defconfig : NO BUILD cubox multi_v7_nosmp_defconfig : NO BUILD dalmore arm-tegra_defconfig : FAILED 1:48.71 dalmore arm-multi_v7_defconfig : FAILED 2:06.94 dalmore arm-multi_lpae_defconfig : FAILED 1:56.83 dalmore multi_v7_nosmp_defconfig : NO BUILD hummingboard multi_v7_nosmp_defconfig : NO BUILD jetsontk1 multi_v7_nosmp_defconfig : NO BUILD minnowmax minnowmax_defconfig : NO BUILD odroidu3 arm-exynos_defconfig : FAILED 1:47.90 omap5uevm arm-multi_v7_defconfig : FAILED 0:50.14 omap5uevm arm-multi_lpae_defconfig : FAILED 2:10.39 omap5uevm multi_v7_nosmp_defconfig : NO BUILD pandaes multi_v7_nosmp_defconfig : NO BUILD parallella multi_v7_nosmp_defconfig : NO BUILD pi arm-multi_v7_defconfig : FAILED 1:58.45 pi arm-multi_lpae_defconfig : FAILED 1:56.56 pi multi_v7_nosmp_defconfig : NO BUILD pit multi_v7_nosmp_defconfig : NO BUILD rk3288evb multi_v7_nosmp_defconfig : NO BUILD seaboard arm-tegra_defconfig : FAILED 1:50.29 seaboard arm-multi_v7_defconfig : FAILED 1:52.02 seaboard multi_v7_nosmp_defconfig : NO BUILD snow multi_v7_nosmp_defconfig : NO BUILD snowball arm-u8500_defconfig : FAILED 1:56.84 snowball arm-multi_v7_defconfig : FAILED 2:08.98 snowball multi_v7_nosmp_defconfig : NO BUILD socfpga multi_v7_nosmp_defconfig : NO BUILD trimslice multi_v7_nosmp_defconfig : NO BUILD wandboard multi_v7_nosmp_defconfig : NO BUILD
Successful boards:
apc arm-vt8500_v6_v7_defconfig : passed 1:10.73 arndale arm-exynos_defconfig : passed 1:30.23 arndale arm-multi_v7_defconfig : passed 1:16.36 arndale arm-multi_lpae_defconfig : passed 1:33.01 capri arm-bcm_defconfig : passed 0:50.67 capri arm-multi_v7_defconfig : passed 0:53.65 chitra powerpc-ppc64_defconfig : passed 2:09.20 colombus arm-sunxi_defconfig : passed 2:20.45 colombus arm-multi_v7_defconfig : passed 2:29.63 colombus arm-multi_lpae_defconfig : passed 2:34.00 cubie arm-sunxi_defconfig : passed 0:51.81 cubie arm-multi_v7_defconfig : passed 0:50.05 cubie2 arm-sunxi_defconfig : passed 0:50.31 cubie2 arm-multi_v7_defconfig : passed 0:53.44 cubie2 arm-multi_lpae_defconfig : passed 0:53.95 cubox arm-multi_v7_defconfig : passed 1:17.87 cubox arm-mvebu_v7_defconfig : passed 1:23.08 hummingboard arm-imx_v6_v7_defconfig : passed 1:30.10 hummingboard arm-multi_v7_defconfig : passed 1:21.25 jetsontk1 arm-tegra_defconfig : passed 1:31.67 jetsontk1 arm-multi_v7_defconfig : passed 1:37.84 jetsontk1 arm-multi_lpae_defconfig : passed 1:45.86 omap5uevm arm-omap2plus_defconfig : passed 1:04.82 pandaes arm-omap2plus_defconfig : warnings 1:35.56 pandaes arm-multi_v7_defconfig : passed 1:39.01 pi arm-exynos_defconfig : passed 2:15.59 pit arm-exynos_defconfig : passed 2:11.21 pit arm-multi_v7_defconfig : passed 2:16.54 pit arm-multi_lpae_defconfig : passed 2:22.46 seattle arm64-defconfig : warnings 2:19.65 snow arm-exynos_defconfig : passed 2:07.97 snow arm-multi_lpae_defconfig : passed 1:58.63 trimslice arm-tegra_defconfig : passed 2:37.82 wandboard arm-imx_v6_v7_defconfig : passed 1:19.61 wandboard arm-multi_v7_defconfig : passed 1:14.10
Offline boards:
beaver arm-tegra_defconfig : OFFLINE 2:13.70 beaver arm-multi_v7_defconfig : OFFLINE 2:14.19 colibri-vf61 arm-imx_v6_v7_defconfig : OFFLINE 2:13.58 colibri-vf61 arm-multi_v7_defconfig : OFFLINE 2:18.01 parallella arm-multi_v7_defconfig : OFFLINE 2:17.32 rk3288evb arm-multi_v7_defconfig : OFFLINE 0:43.24 rk3288evb arm-multi_lpae_defconfig : OFFLINE 0:47.17 sama5 arm-sama5_defconfig : OFFLINE 2:18.79 sama5d3-xplained arm-sama5_defconfig : OFFLINE 2:17.67 snow arm-multi_v7_defconfig : OFFLINE 1:52.43 socfpga arm-socfpga_defconfig : OFFLINE 2:17.57 socfpga arm-multi_v7_defconfig : OFFLINE 2:17.53 trimslice arm-multi_v7_defconfig : OFFLINE 2:21.37
Board legend is available at http://arm-soc.lixom.net/boards.html
Board bbb-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.631504] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.641769] ledtrig-cpu: registered to indicate activity on CPUs [ 1.648868] usbcore: registered new interface driver usbhid [ 1.654795] usbhid: USB HID core driver [ 1.666793] NET: Registered protocol family 10 [ 1.673397] sit: IPv6 over IPv4 tunneling driver [ 1.679548] NET: Registered protocol family 17 [ 1.684318] can: controller area network core (rev 20120528 abi 9) [ 1.690954] NET: Registered protocol family 29 [ 1.695673] can: raw protocol (rev 20120528) [ 1.700193] can: broadcast manager protocol (rev 20120528 t) [ 1.706186] can: netlink gateway (rev 20130117) max_hops=1 [ 1.712954] Key type dns_resolver registered [ 1.717853] omap_voltage_late_init: Voltage driver support not added [ 1.726125] ThumbEE CPU extension supported. [ 1.730751] Registering SWP/SWPB emulation handler [ 1.773013] tps65217 0-0024: TPS65217 ID 0xe version 1.2 [ 1.779542] at24 0-0050: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.787311] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 1.795996] at24 2-0054: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.803907] at24 2-0055: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.811714] at24 2-0056: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.819537] at24 2-0057: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.826891] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz [ 1.835552] cpufreq: cpufreq_online: CPU0: Running at unlisted freq: 550000 KHz [ 1.843467] cpufreq: cpufreq_online: CPU0: Unlisted initial frequency changed to: 600000 KHz [ 1.853199] mmc1: new high speed MMC card at address 0001 [ 1.860460] hctosys: unable to open rtc device (rtc0) [ 1.873379] mmcblk1: mmc1:0001 MMC02G 1.79 GiB [ 1.879399] mmcblk1boot0: mmc1:0001 MMC02G partition 1 1.00 MiB [ 1.886477] mmcblk1boot1: mmc1:0001 MMC02G partition 2 1.00 MiB [ 1.895337] mmcblk1: p1 p2 [ 1.901058] Waiting for root device /dev/mmcblk0p2...
[PYBOOT] [bbb 01:54]: Timed out waiting for "<type 'str'>":
[PYBOOT] [bbb 01:55]: got exception: timeout ~$off
[PYBOOT] [bbb 01:56]: Done. Board bbb-arm-omap2plus_defconfig failure log: -------------------------------------------------
[ 2.058407] omap_hsmmc 481d8000.mmc: lookup for GPIO cd failed [ 2.064522] omap_hsmmc 481d8000.mmc: GPIO lookup for consumer wp [ 2.070845] omap_hsmmc 481d8000.mmc: using device tree for GPIO lookup [ 2.077717] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@481d8000[0]' [ 2.087339] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@481d8000[0]' [ 2.096865] omap_hsmmc 481d8000.mmc: using lookup tables for GPIO lookup [ 2.103903] omap_hsmmc 481d8000.mmc: lookup for GPIO wp failed [ 2.147148] ledtrig-cpu: registered to indicate activity on CPUs [ 2.155860] oprofile: using arm/armv7 [ 2.160963] Initializing XFRM netlink socket [ 2.166047] NET: Registered protocol family 10 [ 2.176769] sit: IPv6 over IPv4 tunneling driver [ 2.185552] NET: Registered protocol family 17 [ 2.190477] NET: Registered protocol family 15 [ 2.195713] Key type dns_resolver registered [ 2.200642] omap_voltage_late_init: Voltage driver support not added [ 2.207384] sr_dev_init: No voltage domain specified for smartreflex0. Cannot initialize [ 2.215876] sr_dev_init: No voltage domain specified for smartreflex1. Cannot initialize [ 2.226149] ThumbEE CPU extension supported. [ 2.230795] Registering SWP/SWPB emulation handler [ 2.235843] SmartReflex Class3 initialized [ 2.305194] mmc1: new high speed MMC card at address 0001 [ 2.318152] mmcblk1: mmc1:0001 MMC02G 1.79 GiB [ 2.328372] mmcblk1boot0: mmc1:0001 MMC02G partition 1 1.00 MiB [ 2.338312] mmcblk1boot1: mmc1:0001 MMC02G partition 2 1.00 MiB [ 2.352047] tps65217 0-0024: TPS65217 ID 0xe version 1.2 [ 2.359468] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 2.371353] mmcblk1: p1 p2 [ 2.379457] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz [ 2.387795] hctosys: unable to open rtc device (rtc0) [ 2.393112] sr_init: No PMIC hook to init smartreflex [ 2.398891] sr_init: platform driver register failed for SR [ 2.453185] Waiting for root device /dev/mmcblk0p2...
[PYBOOT] [bbb 01:52]: Timed out waiting for "<type 'str'>":
[PYBOOT] [bbb 01:53]: got exception: timeout ~$off
[PYBOOT] [bbb 01:55]: Done. Board beagleboard-x15-arm-multi_lpae_defconfig failure log: -------------------------------------------------
[ 1.712312] at24 0-0050: 4096 byte 24c32 EEPROM, writable, 1 bytes/write [ 1.719391] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 1.745526] rtc-ds1307 2-006f: SET TIME! [ 1.751264] rtc-ds1307 2-006f: rtc core: registered mcp7941x as rtc0 [ 1.758015] rtc-ds1307 2-006f: 64 bytes nvram [ 1.762628] omap_i2c 48060000.i2c: bus 2 rev0.12 at 400 kHz [ 1.770816] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 1.776601] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 [ 1.784852] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x00010010 [ 1.794013] xhci-hcd xhci-hcd.0.auto: irq 400, io mem 0x48890000 [ 1.800888] hub 1-0:1.0: USB hub found [ 1.804843] hub 1-0:1.0: 1 port detected [ 1.809247] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 1.815027] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 [ 1.823142] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.832154] hub 2-0:1.0: USB hub found [ 1.836126] hub 2-0:1.0: 1 port detected [ 1.842150] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 1.876183] vdd_3v3: supplied by regen1 [ 1.914500] rtc-ds1307 2-006f: setting system clock to 2001-01-01 00:00:00 UTC (978307200) [ 1.931361] aic_dvdd_fixed: disabling [ 1.935958] Waiting for root device /dev/mmcblk0p1... [ 1.963017] mmc1: new high speed MMC card at address 0001 [ 1.968993] mmcblk1: mmc1:0001 S10004 3.56 GiB [ 1.973872] mmcblk1boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 1.980207] mmcblk1boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 1.987067] mmcblk1: p1 [ 2.115026] usb 1-1: new high-speed USB device number 2 using xhci-hcd [ 2.150053] usb 2-1: new SuperSpeed USB device number 2 using xhci-hcd [ 2.175253] hub 2-1:1.0: USB hub found [ 2.179233] hub 2-1:1.0: 4 ports detected [ 2.271278] hub 1-1:1.0: USB hub found [ 2.275257] hub 1-1:1.0: 4 ports detected
[PYBOOT] [beagleboard-x15 01:46]: Timed out waiting for "<type 'str'>":
[PYBOOT] [beagleboard-x15 01:47]: got exception: timeout ~$off
[PYBOOT] [beagleboard-x15 01:48]: Done. Board beagleboard-x15-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.708292] at24 0-0050: 4096 byte 24c32 EEPROM, writable, 1 bytes/write [ 1.715374] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 1.740548] rtc-ds1307 2-006f: SET TIME! [ 1.746305] rtc-ds1307 2-006f: rtc core: registered mcp7941x as rtc0 [ 1.753058] rtc-ds1307 2-006f: 64 bytes nvram [ 1.757673] omap_i2c 48060000.i2c: bus 2 rev0.12 at 400 kHz [ 1.765903] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 1.771688] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 [ 1.779927] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x00010010 [ 1.789100] xhci-hcd xhci-hcd.0.auto: irq 400, io mem 0x48890000 [ 1.795989] hub 1-0:1.0: USB hub found [ 1.799951] hub 1-0:1.0: 1 port detected [ 1.804359] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 1.810138] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 [ 1.818258] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.827272] hub 2-0:1.0: USB hub found [ 1.831249] hub 2-0:1.0: 1 port detected [ 1.837284] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 1.871181] vdd_3v3: supplied by regen1 [ 1.910582] rtc-ds1307 2-006f: setting system clock to 2001-01-01 00:00:00 UTC (978307200) [ 1.928109] aic_dvdd_fixed: disabling [ 1.932841] Waiting for root device /dev/mmcblk0p1... [ 1.952261] mmc1: new high speed MMC card at address 0001 [ 1.958232] mmcblk1: mmc1:0001 S10004 3.56 GiB [ 1.963116] mmcblk1boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 1.969450] mmcblk1boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 1.976320] mmcblk1: p1 [ 2.110045] usb 1-1: new high-speed USB device number 2 using xhci-hcd [ 2.145073] usb 2-1: new SuperSpeed USB device number 2 using xhci-hcd [ 2.170363] hub 2-1:1.0: USB hub found [ 2.174343] hub 2-1:1.0: 4 ports detected [ 2.266391] hub 1-1:1.0: USB hub found [ 2.270382] hub 1-1:1.0: 4 ports detected
[PYBOOT] [beagleboard-x15 01:41]: Timed out waiting for "<type 'str'>":
[PYBOOT] [beagleboard-x15 01:42]: got exception: timeout ~$off
[PYBOOT] [beagleboard-x15 01:43]: Done. Board beagleboard-x15-arm-omap2plus_defconfig failure log: -------------------------------------------------
[ 2.174138] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 2.181009] of_get_named_gpiod_flags: parsed 'cd-gpios' property of node '/ocp/mmc@4809c000[0]' - status (0) [ 2.191409] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 2.196273] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer wp [ 2.202572] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 2.209441] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@4809c000[0]' [ 2.219046] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@4809c000[0]' [ 2.228548] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 2.235604] omap_hsmmc 4809c000.mmc: lookup for GPIO wp failed [ 2.283959] omap_hsmmc 480b4000.mmc: GPIO lookup for consumer cd [ 2.290257] omap_hsmmc 480b4000.mmc: using device tree for GPIO lookup [ 2.297126] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/ocp/mmc@480b4000[0]' [ 2.306720] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/ocp/mmc@480b4000[0]' [ 2.316230] omap_hsmmc 480b4000.mmc: using lookup tables for GPIO lookup [ 2.323280] omap_hsmmc 480b4000.mmc: lookup for GPIO cd failed [ 2.329397] omap_hsmmc 480b4000.mmc: GPIO lookup for consumer wp [ 2.335701] omap_hsmmc 480b4000.mmc: using device tree for GPIO lookup [ 2.342550] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@480b4000[0]' [ 2.352136] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@480b4000[0]' [ 2.361642] omap_hsmmc 480b4000.mmc: using lookup tables for GPIO lookup [ 2.368684] omap_hsmmc 480b4000.mmc: lookup for GPIO wp failed [ 2.375373] vdd_3v3: supplied by regen1 [ 2.414038] hctosys: unable to open rtc device (rtc0) [ 2.419348] sr_init: No PMIC hook to init smartreflex [ 2.424868] sr_init: platform driver register failed for SR [ 2.472235] aic_dvdd_fixed: disabling [ 2.476497] ldousb: disabling [ 2.485677] Waiting for root device /dev/mmcblk0p1... [ 2.535656] mmc1: new high speed MMC card at address 0001 [ 2.543413] mmcblk1: mmc1:0001 S10004 3.56 GiB [ 2.548701] mmcblk1boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 2.555539] mmcblk1boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 2.563988] mmcblk1: p1
[PYBOOT] [beagleboard-x15 01:41]: Timed out waiting for "<type 'str'>":
[PYBOOT] [beagleboard-x15 01:42]: got exception: timeout ~$off
[PYBOOT] [beagleboard-x15 01:43]: Done. Board cosmic-arm-imx_v6_v7_defconfig failure log: -------------------------------------------------
[ 14.470045] blk_update_request: I/O error, dev mmcblk0, sector 3633185 [ 18.544277] mmcblk0: error -110 transferring data, sector 3633186, nr 230, cmd response 0x900, card status 0x0 [ 18.554597] blk_update_request: I/O error, dev mmcblk0, sector 3633186 [ 22.628779] mmcblk0: error -110 transferring data, sector 3633187, nr 229, cmd response 0x900, card status 0x0 [ 22.639095] blk_update_request: I/O error, dev mmcblk0, sector 3633187 [ 26.713322] mmcblk0: error -110 transferring data, sector 3633188, nr 228, cmd response 0x900, card status 0x0 [ 26.723643] blk_update_request: I/O error, dev mmcblk0, sector 3633188 [ 30.797829] mmcblk0: error -110 transferring data, sector 3633189, nr 227, cmd response 0x900, card status 0x0 [ 30.808153] blk_update_request: I/O error, dev mmcblk0, sector 3633189 [ 34.882396] mmcblk0: error -110 transferring data, sector 3633190, nr 226, cmd response 0x900, card status 0x0 [ 34.892718] blk_update_request: I/O error, dev mmcblk0, sector 3633190 [ 38.966898] mmcblk0: error -110 transferring data, sector 3633191, nr 225, cmd response 0x900, card status 0x0 [ 38.977227] blk_update_request: I/O error, dev mmcblk0, sector 3633191 [ 43.051456] mmcblk0: error -110 transferring data, sector 3633192, nr 224, cmd response 0x900, card status 0x0 [ 43.061781] blk_update_request: I/O error, dev mmcblk0, sector 3633192 [ 47.136023] mmcblk0: error -110 transferring data, sector 3633193, nr 223, cmd response 0x900, card status 0x0 [ 47.146345] blk_update_request: I/O error, dev mmcblk0, sector 3633193 [ 51.220576] mmcblk0: error -110 transferring data, sector 3633194, nr 222, cmd response 0x900, card status 0x0 [ 51.230896] blk_update_request: I/O error, dev mmcblk0, sector 3633194 [ 55.305134] mmcblk0: error -110 transferring data, sector 3633195, nr 221, cmd response 0x900, card status 0x0 [ 55.315477] blk_update_request: I/O error, dev mmcblk0, sector 3633195 [ 59.389839] mmcblk0: error -110 transferring data, sector 3633196, nr 220, cmd response 0x900, card status 0x0 [ 59.400162] blk_update_request: I/O error, dev mmcblk0, sector 3633196 [ 63.474383] mmcblk0: error -110 transferring data, sector 3633197, nr 219, cmd response 0x900, card status 0x0 [ 63.484707] blk_update_request: I/O error, dev mmcblk0, sector 3633197 [ 67.558880] mmcblk0: error -110 transferring data, sector 3633198, nr 218, cmd response 0x900, card status 0x0 [ 67.569200] blk_update_request: I/O error, dev mmcblk0, sector 3633198 [ 71.643423] mmcblk0: error -110 transferring data, sector 3633199, nr 217, cmd response 0x900, card status 0x0 [ 71.653745] blk_update_request: I/O error, dev mmcblk0, sector 3633199 [ 75.727926] mmcblk0: error -110 transferring data, sector 3633200, nr 216, cmd response 0x900, card status 0x0 [ 75.738246] blk_update_request: I/O error, dev mmcblk0, sector 3633200 [ 79.812476] mmcblk0: error -110 transferring data, sector 3633201, nr 215, cmd response 0x900, card status 0x0 [ 79.822800] blk_update_request: I/O error, dev mmcblk0, sector 3633201
[PYBOOT] [cosmic 01:58]: Timed out waiting for "<type 'str'>":
[PYBOOT] [cosmic 01:59]: got exception: timeout ~$off
[PYBOOT] [cosmic 02:00]: Done. Board cosmic-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 14.083277] blk_update_request: I/O error, dev mmcblk0, sector 3633185 [ 18.157262] mmcblk0: error -110 transferring data, sector 3633186, nr 230, cmd response 0x900, card status 0x0 [ 18.167336] blk_update_request: I/O error, dev mmcblk0, sector 3633186 [ 22.241317] mmcblk0: error -110 transferring data, sector 3633187, nr 229, cmd response 0x900, card status 0x0 [ 22.251397] blk_update_request: I/O error, dev mmcblk0, sector 3633187 [ 26.325379] mmcblk0: error -110 transferring data, sector 3633188, nr 228, cmd response 0x900, card status 0x0 [ 26.335457] blk_update_request: I/O error, dev mmcblk0, sector 3633188 [ 30.409438] mmcblk0: error -110 transferring data, sector 3633189, nr 227, cmd response 0x900, card status 0x0 [ 30.419516] blk_update_request: I/O error, dev mmcblk0, sector 3633189 [ 34.493498] mmcblk0: error -110 transferring data, sector 3633190, nr 226, cmd response 0x900, card status 0x0 [ 34.503577] blk_update_request: I/O error, dev mmcblk0, sector 3633190 [ 38.577565] mmcblk0: error -110 transferring data, sector 3633191, nr 225, cmd response 0x900, card status 0x0 [ 38.587632] blk_update_request: I/O error, dev mmcblk0, sector 3633191 [ 42.661620] mmcblk0: error -110 transferring data, sector 3633192, nr 224, cmd response 0x900, card status 0x0 [ 42.671693] blk_update_request: I/O error, dev mmcblk0, sector 3633192 [ 46.745680] mmcblk0: error -110 transferring data, sector 3633193, nr 223, cmd response 0x900, card status 0x0 [ 46.755752] blk_update_request: I/O error, dev mmcblk0, sector 3633193 [ 50.829738] mmcblk0: error -110 transferring data, sector 3633194, nr 222, cmd response 0x900, card status 0x0 [ 50.839811] blk_update_request: I/O error, dev mmcblk0, sector 3633194 [ 54.913798] mmcblk0: error -110 transferring data, sector 3633195, nr 221, cmd response 0x900, card status 0x0 [ 54.923872] blk_update_request: I/O error, dev mmcblk0, sector 3633195 [ 58.997856] mmcblk0: error -110 transferring data, sector 3633196, nr 220, cmd response 0x900, card status 0x0 [ 59.007931] blk_update_request: I/O error, dev mmcblk0, sector 3633196 [ 63.081916] mmcblk0: error -110 transferring data, sector 3633197, nr 219, cmd response 0x900, card status 0x0 [ 63.091991] blk_update_request: I/O error, dev mmcblk0, sector 3633197 [ 67.165972] mmcblk0: error -110 transferring data, sector 3633198, nr 218, cmd response 0x900, card status 0x0 [ 67.176051] blk_update_request: I/O error, dev mmcblk0, sector 3633198 [ 71.250030] mmcblk0: error -110 transferring data, sector 3633199, nr 217, cmd response 0x900, card status 0x0 [ 71.260135] blk_update_request: I/O error, dev mmcblk0, sector 3633199 [ 75.334121] mmcblk0: error -110 transferring data, sector 3633200, nr 216, cmd response 0x900, card status 0x0 [ 75.344198] blk_update_request: I/O error, dev mmcblk0, sector 3633200 [ 79.418185] mmcblk0: error -110 transferring data, sector 3633201, nr 215, cmd response 0x900, card status 0x0 [ 79.428266] blk_update_request: I/O error, dev mmcblk0, sector 3633201
[PYBOOT] [cosmic 02:04]: Timed out waiting for "<type 'str'>":
[PYBOOT] [cosmic 02:05]: got exception: timeout ~$off
[PYBOOT] [cosmic 02:06]: Done. Board dalmore-arm-multi_lpae_defconfig failure log: -------------------------------------------------
[ 2.484356] Key type dns_resolver registered [ 2.490789] ThumbEE CPU extension supported. [ 2.495206] Registering SWP/SWPB emulation handler [ 2.524830] vdd-sys-5v0: supplied by vdd_ac_bat [ 2.532606] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 2.543423] vdd_hdmi_5v0: supplied by vdd-sys-5v0 [ 2.558944] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.565678] [drm] No driver support for vblank timestamp query. [ 2.595939] mmc1: new high speed MMC card at address 0001 [ 2.605031] mmcblk1: mmc1:0001 SEM32G 29.1 GiB [ 2.612026] mmcblk1boot0: mmc1:0001 SEM32G partition 1 4.00 MiB [ 2.620667] mmcblk1boot1: mmc1:0001 SEM32G partition 2 4.00 MiB [ 2.628909] mmcblk1rpmb: mmc1:0001 SEM32G partition 3 4.00 MiB [ 2.640150] mmcblk1: p1 [ 2.744891] Console: switching to colour frame buffer device 240x75 [ 2.832352] drm drm: fb0: frame buffer device [ 2.848828] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 2.858940] usb2_vbus: supplied by vdd-sys-5v0 [ 2.870557] tegra-ehci 7d008000.usb: EHCI Host Controller [ 2.876153] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 2.885004] tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 [ 2.898968] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 2.909398] hub 1-0:1.0: USB hub found [ 2.913391] hub 1-0:1.0: 1 port detected [ 2.923503] input: gpio-keys as /devices/soc0/gpio-keys/input/input0 [ 2.937199] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 2.999246] dvdd_ts: disabling [ 3.002349] usb1_vbus: disabling [ 3.005707] vdd_cam_1v8_reg: disabling [ 3.013089] Waiting for root device /dev/mmcblk0p1... [ 3.223971] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 4.202614] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f [ 49.848925] random: nonblocking pool is initialized
[PYBOOT] [dalmore 01:54]: Timed out waiting for "<type 'str'>":
[PYBOOT] [dalmore 01:55]: got exception: timeout ~$off
[PYBOOT] [dalmore 01:56]: Done. Board dalmore-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 2.486462] Key type dns_resolver registered [ 2.492884] ThumbEE CPU extension supported. [ 2.497299] Registering SWP/SWPB emulation handler [ 2.532365] vdd-sys-5v0: supplied by vdd_ac_bat [ 2.539447] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 2.550250] vdd_hdmi_5v0: supplied by vdd-sys-5v0 [ 2.566775] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.573538] [drm] No driver support for vblank timestamp query. [ 2.587054] mmc1: new high speed MMC card at address 0001 [ 2.596078] mmcblk1: mmc1:0001 SEM32G 29.1 GiB [ 2.602795] mmcblk1boot0: mmc1:0001 SEM32G partition 1 4.00 MiB [ 2.610014] mmcblk1boot1: mmc1:0001 SEM32G partition 2 4.00 MiB [ 2.618614] mmcblk1rpmb: mmc1:0001 SEM32G partition 3 4.00 MiB [ 2.630130] mmcblk1: p1 [ 2.751594] Console: switching to colour frame buffer device 240x75 [ 2.838896] drm drm: fb0: frame buffer device [ 2.859070] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 2.869150] usb2_vbus: supplied by vdd-sys-5v0 [ 2.880761] tegra-ehci 7d008000.usb: EHCI Host Controller [ 2.886358] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 2.895229] tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 [ 2.909104] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 2.919423] hub 1-0:1.0: USB hub found [ 2.923433] hub 1-0:1.0: 1 port detected [ 2.934931] input: gpio-keys as /devices/soc0/gpio-keys/input/input0 [ 2.949581] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 3.012010] dvdd_ts: disabling [ 3.015216] usb1_vbus: disabling [ 3.018476] vdd_cam_1v8_reg: disabling [ 3.026196] Waiting for root device /dev/mmcblk0p1... [ 3.234105] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 4.212801] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f [ 49.754063] random: nonblocking pool is initialized
[PYBOOT] [dalmore 02:03]: Timed out waiting for "<type 'str'>":
[PYBOOT] [dalmore 02:04]: got exception: timeout ~$off
[PYBOOT] [dalmore 02:05]: Done. Board dalmore-arm-tegra_defconfig failure log: -------------------------------------------------
[ 2.821088] Bluetooth: RFCOMM ver 1.11 [ 2.825033] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 2.830429] Bluetooth: BNEP socket layer initialized [ 2.835520] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 2.841518] Bluetooth: HIDP socket layer initialized [ 2.848495] Key type dns_resolver registered [ 2.858146] Registering SWP/SWPB emulation handler [ 2.888628] vdd-sys-5v0: supplied by vdd_ac_bat [ 2.895607] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 2.903600] vdd_hdmi_5v0: supplied by vdd-sys-5v0 [ 2.927380] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.934149] [drm] No driver support for vblank timestamp query. [ 3.111246] Console: switching to colour frame buffer device 240x75 [ 3.198354] drm drm: fb0: frame buffer device [ 3.223700] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.230984] usb2_vbus: supplied by vdd-sys-5v0 [ 3.239386] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.245198] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 3.254397] tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 [ 3.273703] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 3.287794] hub 1-0:1.0: USB hub found [ 3.291748] hub 1-0:1.0: 1 port detected [ 3.305554] input: gpio-keys as /devices/soc0/gpio-keys/input/input1 [ 3.321711] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:01 UTC (946684801) [ 3.417200] dvdd_ts: disabling [ 3.420315] usb1_vbus: disabling [ 3.423728] vdd_cam_1v8_reg: disabling [ 3.428403] ALSA device list: [ 3.431419] #0: NVIDIA Tegra Dalmore [ 3.437426] Waiting for root device /dev/mmcblk0p1... [ 3.613586] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 4.637161] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f [ 62.173660] random: nonblocking pool is initialized
[PYBOOT] [dalmore 01:46]: Timed out waiting for "<type 'str'>":
[PYBOOT] [dalmore 01:47]: got exception: timeout ~$off
[PYBOOT] [dalmore 01:48]: Done. Board odroidu3-arm-exynos_defconfig failure log: -------------------------------------------------
[ 1.734939] dwmmc_exynos 12550000.mmc: DW MMC controller at irq 107,32 bit host data width,128 deep fifo [ 1.744379] usb 1-3: new high-speed USB device number 2 using exynos-ehci [ 1.751426] dwmmc_exynos 12550000.mmc: allocated mmc-pwrseq [ 1.782520] dwmmc_exynos 12550000.mmc: 1 slots initialized [ 1.783716] usbcore: registered new interface driver usbhid [ 1.788942] usbhid: USB HID core driver [ 1.797706] NET: Registered protocol family 10 [ 1.798304] sit: IPv6 over IPv4 tunneling driver [ 1.801564] NET: Registered protocol family 17 [ 1.805573] NET: Registered protocol family 15 [ 1.810030] Key type dns_resolver registered [ 1.814357] Registering SWP/SWPB emulation handler [ 1.823193] s3c-rtc 10070000.rtc: rtc disabled, re-enabling [ 1.824731] s3c-rtc 10070000.rtc: rtc core: registered s3c as rtc1 [ 1.853061] max98090 1-0010: MAX98090 REVID=0x43 [ 1.855320] max98090 1-0010: use default 2.8v micbias [ 1.862455] asoc-simple-card sound: HiFi <-> 3830000.i2s mapping ok [ 1.865388] input: gpio_keys as /devices/platform/gpio_keys/input/input0 [ 1.871269] mmc_host mmc1: Bus speed (slot 0) = 44000000Hz (slot req 52000000Hz, actual 44000000HZ div = 0) [ 1.880025] mmc_host mmc1: Bus speed (slot 0) = 73333333Hz (slot req 52000000Hz, actual 36666666HZ div = 1) [ 1.889749] mmc1: new DDR MMC card at address 0001 [ 1.894799] mmcblk1: mmc1:0001 008G92 7.28 GiB [ 1.898959] mmcblk1boot0: mmc1:0001 008G92 partition 1 4.00 MiB [ 1.904855] mmcblk1boot1: mmc1:0001 008G92 partition 2 4.00 MiB [ 1.910723] mmcblk1rpmb: mmc1:0001 008G92 partition 3 512 KiB [ 1.916288] max77686-rtc max77686-rtc: setting system clock to 2000-01-01 01:00:19 UTC (946688419) [ 1.917345] mmcblk1: p1 p2 [ 1.941927] VDD10_HDMI_1.0V: disabling [ 1.942611] vdd_g3d: disabling [ 1.943687] BUCK8_2.8V: disabling [ 1.947649] ALSA device list: [ 1.949316] #0: Odroid-U3 [ 1.952959] Waiting for root device /dev/mmcblk0p2...
[PYBOOT] [odroidu3 01:45]: Timed out waiting for "<type 'str'>":
[PYBOOT] [odroidu3 01:46]: got exception: timeout ~$off
[PYBOOT] [odroidu3 01:47]: Done. Board omap5uevm-arm-multi_lpae_defconfig failure log: -------------------------------------------------
[ 3.183249] [<c031cb9c>] (__do_kernel_fault.part.0) from [<c0317c10>] (do_page_fault+0x370/0x384) [ 3.192543] [<c0317c10>] (do_page_fault) from [<c03012c8>] (do_DataAbort+0x3c/0xb8) [ 3.200560] [<c03012c8>] (do_DataAbort) from [<c030c420>] (__dabt_svc+0x40/0x60) [ 3.208302] Exception stack(0xee087c38 to 0xee087c80) [ 3.213581] 7c20: aeb1e88c ee087c88 [ 3.222146] 7c40: 2ddd1000 00000000 ee03a000 024080c0 2ddd1000 ee025f40 00000004 0000a1ff [ 3.230708] 7c60: c13c1474 c1453ad8 000007d4 ee087c88 c046cfa4 c0409394 a0000013 ffffffff [ 3.239277] [<c030c420>] (__dabt_svc) from [<c0409394>] (kmem_cache_alloc+0x48/0x104) [ 3.247480] [<c0409394>] (kmem_cache_alloc) from [<c046cfa4>] (__kernfs_new_node+0x44/0xb8) [ 3.256222] [<c046cfa4>] (__kernfs_new_node) from [<c046e034>] (kernfs_new_node+0x1c/0x38) [ 3.264884] [<c046e034>] (kernfs_new_node) from [<c046faf0>] (kernfs_create_link+0x18/0x6c) [ 3.273628] [<c046faf0>] (kernfs_create_link) from [<c04706a8>] (sysfs_do_create_link_sd+0x78/0xc4) [ 3.283112] [<c04706a8>] (sysfs_do_create_link_sd) from [<c07786c4>] (device_add+0x1a8/0x568) [ 3.292047] [<c07786c4>] (device_add) from [<c0983440>] (__thermal_cooling_device_register+0x128/0x39c) [ 3.301892] [<c0983440>] (__thermal_cooling_device_register) from [<c0985d78>] (__cpufreq_cooling_register+0x280/0x574) [ 3.313189] [<c0985d78>] (__cpufreq_cooling_register) from [<c0998870>] (cpufreq_ready+0x70/0xb8) [ 3.322482] [<c0998870>] (cpufreq_ready) from [<c0996554>] (cpufreq_online+0x3ec/0x6d8) [ 3.330866] [<c0996554>] (cpufreq_online) from [<c0779a5c>] (subsys_interface_register+0x90/0xcc) [ 3.340160] [<c0779a5c>] (subsys_interface_register) from [<c0995118>] (cpufreq_register_driver+0x150/0x1a0) [ 3.350448] [<c0995118>] (cpufreq_register_driver) from [<c0998c70>] (dt_cpufreq_probe+0x70/0xe8) [ 3.359741] [<c0998c70>] (dt_cpufreq_probe) from [<c077caf8>] (platform_drv_probe+0x50/0xb0) [ 3.368579] [<c077caf8>] (platform_drv_probe) from [<c077b314>] (driver_probe_device+0x208/0x2b4) [ 3.377870] [<c077b314>] (driver_probe_device) from [<c0779734>] (bus_for_each_drv+0x60/0x94) [ 3.386796] [<c0779734>] (bus_for_each_drv) from [<c077b02c>] (__device_attach+0xb0/0x114) [ 3.395456] [<c077b02c>] (__device_attach) from [<c077a510>] (bus_probe_device+0x84/0x8c) [ 3.404020] [<c077a510>] (bus_probe_device) from [<c077a99c>] (deferred_probe_work_func+0x68/0x94) [ 3.413413] [<c077a99c>] (deferred_probe_work_func) from [<c0356718>] (process_one_work+0x1ec/0x410) [ 3.422975] [<c0356718>] (process_one_work) from [<c0357384>] (worker_thread+0x38/0x594) [ 3.431456] [<c0357384>] (worker_thread) from [<c035c148>] (kthread+0xdc/0xf4) [ 3.439020] [<c035c148>] (kthread) from [<c0307d38>] (ret_from_fork+0x14/0x3c) [ 3.446591] Code: ebff8888 e1a00006 e8bd81f0 e59032f8 (e5130014) [ 3.452969] ---[ end trace 1c4c3a59151b46ea ]--- [ 3.457800] Fixing recursive fault but reboot is needed!
[PYBOOT] [omap5uevm 02:07]: Timed out waiting for "<type 'str'>":
[PYBOOT] [omap5uevm 02:08]: got exception: timeout ~$off
[PYBOOT] [omap5uevm 02:09]: Done. Board omap5uevm-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 2.312538] ffe0: 00000000 00000000 00000000 00000000 00000013 00000000 e1caca43 6409b0c2 [ 2.321054] [<c0387680>] (handle_fasteoi_irq) from [<c0383a34>] (generic_handle_irq+0x24/0x34) [ 2.330026] [<c0383a34>] (generic_handle_irq) from [<c0383ce4>] (__handle_domain_irq+0x5c/0xb4) [ 2.339084] [<c0383ce4>] (__handle_domain_irq) from [<c0301798>] (gic_handle_irq+0x54/0x94) [ 2.347777] [<c0301798>] (gic_handle_irq) from [<c030c494>] (__irq_svc+0x54/0x70) [ 2.355577] Exception stack(0xee07fe50 to 0xee07fe98) [ 2.360834] fe40: 00000b39 00000000 ff550000 c09dd684 [ 2.369351] fe60: c1444b70 000017ff 0cee85dd c0d6b0f4 c0d6b100 00000000 eefcce40 ee03e900 [ 2.377861] fe80: 00000000 ee07fea0 c030f784 c0589a28 80000013 ffffffff [ 2.384750] [<c030c494>] (__irq_svc) from [<c0589a28>] (__timer_delay+0x38/0x5c) [ 2.392461] [<c0589a28>] (__timer_delay) from [<c09a4810>] (mmc_go_idle+0xd4/0xd8) [ 2.400346] [<c09a4810>] (mmc_go_idle) from [<c09a06c8>] (mmc_rescan+0x25c/0x348) [ 2.408146] [<c09a06c8>] (mmc_rescan) from [<c0356718>] (process_one_work+0x1ec/0x410) [ 2.416401] [<c0356718>] (process_one_work) from [<c0357384>] (worker_thread+0x38/0x594) [ 2.424832] [<c0357384>] (worker_thread) from [<c035c148>] (kthread+0xdc/0xf4) [ 2.432355] [<c035c148>] (kthread) from [<c0307d38>] (ret_from_fork+0x14/0x3c) [ 2.439881] Code: e3530000 0a000005 e2840010 e12fff33 (e594201c) [ 2.446229] ---[ end trace 9a0cd9270844f200 ]--- [ 2.451038] Kernel panic - not syncing: Fatal exception in interrupt [ 2.457654] CPU1: stopping [ 2.460467] CPU: 1 PID: 0 Comm: swapper/1 Tainted: G D 4.6.0-rc7-00183-g1410b74 #1 [ 2.469527] Hardware name: Generic OMAP5 (Flattened Device Tree) [ 2.475788] [<c031031c>] (unwind_backtrace) from [<c030b968>] (show_stack+0x10/0x14) [ 2.483857] [<c030b968>] (show_stack) from [<c058bb74>] (dump_stack+0x88/0x9c) [ 2.491390] [<c058bb74>] (dump_stack) from [<c030eac4>] (handle_IPI+0x16c/0x18c) [ 2.499094] [<c030eac4>] (handle_IPI) from [<c03017d4>] (gic_handle_irq+0x90/0x94) [ 2.506985] [<c03017d4>] (gic_handle_irq) from [<c030c494>] (__irq_svc+0x54/0x70) [ 2.514780] Exception stack(0xee091f88 to 0xee091fd0) [ 2.520037] 1f80: 00000001 00000000 ea000013 f0880000 ee090000 c13024a4 [ 2.528555] 1fa0: 00000000 00000000 c12075c0 c1302504 c140dee8 c130250c 60000013 ee091fd8 [ 2.537071] 1fc0: c032af10 c0308740 a0000013 ffffffff [ 2.542333] [<c030c494>] (__irq_svc) from [<c0308740>] (arch_cpu_idle+0x20/0x3c) [ 2.550042] [<c0308740>] (arch_cpu_idle) from [<c03781b0>] (cpu_startup_entry+0x1bc/0x218) [ 2.558652] [<c03781b0>] (cpu_startup_entry) from [<80301c8c>] (0x80301c8c) [ 2.565903] ---[ end Kernel panic - not syncing: Fatal exception in interrupt
[PYBOOT] [omap5uevm 00:48]: got exception: panic ~$off
[PYBOOT] [omap5uevm 00:49]: Done. Board pi-arm-multi_lpae_defconfig failure log: -------------------------------------------------
[ 1.522746] isl29018 7-0044: No cache defaults, reading back from HW [ 1.529094] isl29018 7-0044: Failed to read 1: -6 [ 1.533678] isl29018 7-0044: regmap initialization fails: -6 [ 1.543894] NET: Registered protocol family 10 [ 1.548343] sit: IPv6 over IPv4 tunneling driver [ 1.551925] NET: Registered protocol family 17 [ 1.555929] can: controller area network core (rev 20120528 abi 9) [ 1.562118] NET: Registered protocol family 29 [ 1.566508] can: raw protocol (rev 20120528) [ 1.570757] can: broadcast manager protocol (rev 20120528 t) [ 1.576399] can: netlink gateway (rev 20130117) max_hops=1 [ 1.582122] Key type dns_resolver registered [ 1.586444] ThumbEE CPU extension supported. [ 1.590347] Registering SWP/SWPB emulation handler [ 1.599520] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.604991] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.611361] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.616738] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 1.626807] input: gpio-keys as /devices/platform/gpio-keys/input/input1 [ 1.632771] mmc_host mmc0: Bus speed (slot 0) = 200000000Hz (slot req 200000000Hz, actual 200000000HZ div = 0) [ 1.646215] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.651950] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.658053] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.663429] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 1.673171] max77686-rtc max77802-rtc: hctosys: unable to read the hardware clock [ 1.695120] Waiting for root device /dev/mmcblk0p1... [ 1.698968] mmc0: tuning execution failed: -5 [ 1.703051] mmc0: error -5 whilst initialising MMC card [ 2.572559] asix 1-1:1.0 eth0: register 'asix' at usb-xhci-hcd.2.auto-1, ASIX AX88772 USB 2.0 Ethernet, c8:b3:73:46:fb:95 [ 2.585848] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 2.591306] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 2.597682] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 2.603067] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo
[PYBOOT] [pi 01:53]: Timed out waiting for "<type 'str'>":
[PYBOOT] [pi 01:54]: got exception: timeout ~$off
[PYBOOT] [pi 01:56]: Done. Board pi-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.528264] isl29018 7-0044: No cache defaults, reading back from HW [ 1.534610] isl29018 7-0044: Failed to read 1: -6 [ 1.539196] isl29018 7-0044: regmap initialization fails: -6 [ 1.549457] NET: Registered protocol family 10 [ 1.553907] sit: IPv6 over IPv4 tunneling driver [ 1.557492] NET: Registered protocol family 17 [ 1.561491] can: controller area network core (rev 20120528 abi 9) [ 1.567678] NET: Registered protocol family 29 [ 1.572068] can: raw protocol (rev 20120528) [ 1.576318] can: broadcast manager protocol (rev 20120528 t) [ 1.581960] can: netlink gateway (rev 20130117) max_hops=1 [ 1.587684] Key type dns_resolver registered [ 1.592008] ThumbEE CPU extension supported. [ 1.595908] Registering SWP/SWPB emulation handler [ 1.605137] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.610616] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.616982] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.622360] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 1.632439] input: gpio-keys as /devices/platform/gpio-keys/input/input1 [ 1.638394] mmc_host mmc0: Bus speed (slot 0) = 200000000Hz (slot req 200000000Hz, actual 200000000HZ div = 0) [ 1.651868] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.657604] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.663709] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.669086] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 1.678830] max77686-rtc max77802-rtc: hctosys: unable to read the hardware clock [ 1.701018] Waiting for root device /dev/mmcblk0p1... [ 1.704819] mmc0: tuning execution failed: -5 [ 1.708952] mmc0: error -5 whilst initialising MMC card [ 2.573038] asix 1-1:1.0 eth0: register 'asix' at usb-xhci-hcd.2.auto-1, ASIX AX88772 USB 2.0 Ethernet, c8:b3:73:46:fb:95 [ 2.586360] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 2.591822] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 2.598194] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 2.603578] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo
[PYBOOT] [pi 01:54]: Timed out waiting for "<type 'str'>":
[PYBOOT] [pi 01:55]: got exception: timeout ~$off
[PYBOOT] [pi 01:56]: Done. Board seaboard-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.657166] vdd_ldo7,avdd_hdmi,vdd_fuse: supplied by vdd_sm2,vin_ldo* [ 1.667646] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 1.674122] tegra-ehci c5000000.usb: EHCI Host Controller [ 1.679543] tegra-ehci c5000000.usb: new USB bus registered, assigned bus number 3 [ 1.688010] tegra-ehci c5000000.usb: irq 287, io mem 0xc5000000 [ 1.699908] mmc2: switch to bus width 8 failed [ 1.704460] tegra-ehci c5000000.usb: USB 2.0 started, EHCI 1.00 [ 1.710707] mmc2: switch to bus width 4 failed [ 1.715211] mmc2: new high speed MMC card at address 0001 [ 1.721788] hub 3-0:1.0: USB hub found [ 1.723038] mmcblk2: mmc2:0001 MMC08G 7.46 GiB [ 1.725865] mmcblk2boot0: mmc2:0001 MMC08G partition 1 512 KiB [ 1.726276] mmcblk2boot1: mmc2:0001 MMC08G partition 2 512 KiB [ 1.727681] mmcblk2: p3 [ 1.744347] hub 3-0:1.0: 1 port detected [ 1.745981] mmc0: queuing unknown CIS tuple 0x80 (50 bytes) [ 1.753859] mmc0: queuing unknown CIS tuple 0x80 (7 bytes) [ 1.762240] mmc0: queuing unknown CIS tuple 0x80 (7 bytes) [ 1.762244] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.762252] [drm] No driver support for vblank timestamp query. [ 1.787514] mmc0: queuing unknown CIS tuple 0x80 (19 bytes) [ 1.812888] mmc0: queuing unknown CIS tuple 0x02 (1 bytes) [ 1.817267] mmc0: new SDIO card at address 0001 [ 1.865955] Console: switching to colour frame buffer device 170x48 [ 1.899476] drm drm: fb0: frame buffer device [ 1.918656] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 1.925471] input: gpio-keys as /devices/soc0/gpio-keys/input/input2 [ 1.932543] tps6586x-rtc tps6586x-rtc: setting system clock to 2009-01-01 00:00:00 UTC (1230768000) [ 1.946618] vdd_1v5: disabling [ 1.949701] vdd_1v2: disabling [ 2.548258] asix 2-1:1.0 eth0: register 'asix' at usb-c5008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, c0:c1:c0:13:08:60 [ 2.559718] Waiting for root device /dev/mmcblk0p3... [ 58.568284] random: nonblocking pool is initialized
[PYBOOT] [seaboard 01:49]: Timed out waiting for "<type 'str'>":
[PYBOOT] [seaboard 01:50]: got exception: timeout ~$off
[PYBOOT] [seaboard 01:51]: Done. Board seaboard-arm-tegra_defconfig failure log: -------------------------------------------------
[ 1.731058] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 1.736385] Bluetooth: BNEP socket layer initialized [ 1.741373] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 1.747312] Bluetooth: HIDP socket layer initialized [ 1.752847] Key type dns_resolver registered [ 1.758186] Registering SWP/SWPB emulation handler [ 1.782790] tegra-dc 54200000.dc: failed to probe RGB output: -517 [ 1.789562] VDDIO_HDMI: supplied by vdd_5v0 [ 1.793986] vdd_sys: supplied by vdd_5v0 [ 1.798000] vdd_sm2,vin_ldo*: supplied by vdd_sys [ 1.802993] vdd_ldo8,avdd_hdmi_pll: supplied by vdd_sm2,vin_ldo* [ 1.809563] vdd_ldo7,avdd_hdmi,vdd_fuse: supplied by vdd_sm2,vin_ldo* [ 1.820034] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 1.826494] tegra-ehci c5000000.usb: EHCI Host Controller [ 1.831961] tegra-ehci c5000000.usb: new USB bus registered, assigned bus number 3 [ 1.840007] tegra-ehci c5000000.usb: irq 287, io mem 0xc5000000 [ 1.858561] tegra-ehci c5000000.usb: USB 2.0 started, EHCI 1.00 [ 1.867181] hub 3-0:1.0: USB hub found [ 1.871042] hub 3-0:1.0: 1 port detected [ 1.883083] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.889762] [drm] No driver support for vblank timestamp query. [ 1.995691] Console: switching to colour frame buffer device 170x48 [ 2.018861] drm drm: fb0: frame buffer device [ 2.048692] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 2.056162] input: gpio-keys as /devices/soc0/gpio-keys/input/input4 [ 2.063951] tps6586x-rtc tps6586x-rtc: setting system clock to 2009-01-01 00:00:00 UTC (1230768000) [ 2.096384] vdd_1v5: disabling [ 2.099466] vdd_1v2: disabling [ 2.102666] ALSA device list: [ 2.105628] #0: NVIDIA Tegra Seaboard [ 2.385251] asix 2-1:1.0 eth0: register 'asix' at usb-c5008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, c0:c1:c0:13:08:60 [ 2.396307] Waiting for root device /dev/mmcblk0p3... [ 60.244390] random: nonblocking pool is initialized
[PYBOOT] [seaboard 01:47]: Timed out waiting for "<type 'str'>":
[PYBOOT] [seaboard 01:48]: got exception: timeout ~$off
[PYBOOT] [seaboard 01:49]: Done. Board snowball-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.927001] ledtrig-cpu: registered to indicate activity on CPUs [ 1.933868] usbcore: registered new interface driver usbhid [ 1.939483] usbhid: USB HID core driver [ 1.953552] NET: Registered protocol family 10 [ 1.959808] sit: IPv6 over IPv4 tunneling driver [ 1.965667] NET: Registered protocol family 17 [ 1.970184] can: controller area network core (rev 20120528 abi 9) [ 1.976501] NET: Registered protocol family 29 [ 1.981018] can: raw protocol (rev 20120528) [ 1.985321] can: broadcast manager protocol (rev 20120528 t) [ 1.991027] can: netlink gateway (rev 20130117) max_hops=1 [ 1.997406] Key type dns_resolver registered [ 2.002044] ThumbEE CPU extension supported. [ 2.006378] Registering SWP/SWPB emulation handler [ 2.019042] input: gpio_keys as /devices/soc0/gpio_keys/input/input0 [ 2.026184] rtc-pl031 80154000.rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 2.035736] thermal cooling_device0: thermal-cpufreq-0 bind to 0: 0-succeed [ 2.042816] thermal cooling_device0: thermal-cpufreq-0 bind to 1: 0-succeed [ 2.049835] thermal cooling_device0: thermal-cpufreq-0 bind to 2: 0-succeed [ 2.056854] db8500-cpufreq-cooling soc:cpufreq-cooling: Cooling device registered: thermal-cpufreq-0 [ 2.073852] db8500-esram12: disabling [ 2.077667] db8500-esram34: disabling [ 2.081756] V-CSI/DSI: disabling [ 2.085144] mmci-reg: disabling [ 2.090240] uart-pl011 80007000.uart: DMA channel TX dma0chan20 [ 2.096282] uart-pl011 80007000.uart: DMA channel RX dma0chan21 [ 2.104949] Waiting for root device /dev/mmcblk0p4... [ 2.139221] mmc3: new high speed MMC card at address 0001 [ 2.145538] mmcblk3: mmc3:0001 3.53 GiB [ 2.149963] mmcblk3boot0: mmc3:0001 partition 1 2.00 MiB [ 2.155792] mmcblk3boot1: mmc3:0001 partition 2 2.00 MiB [ 2.161621] mmcblk3rpmb: mmc3:0001 partition 3 128 KiB [ 2.168487] mmcblk3: p1 p2 p3 p4
[PYBOOT] [snowball 02:06]: Timed out waiting for "<type 'str'>":
[PYBOOT] [snowball 02:07]: got exception: timeout ~$off
[PYBOOT] [snowball 02:08]: Done. Board snowball-arm-u8500_defconfig failure log: -------------------------------------------------
[ 2.601165] ux500-msp-i2s ux500-msp-i2s.1: Failed to get DMA channel capabilities, falling back to period counting: -6 [ 2.611907] snd-soc-mop500 snd-soc-mop500.0: ab8500-codec-dai.0 <-> ux500-msp-i2s.1 mapping ok [ 2.621826] ux500-msp-i2s ux500-msp-i2s.3: Failed to get DMA channel capabilities, falling back to period counting: -6 [ 2.632568] snd-soc-mop500 snd-soc-mop500.0: ab8500-codec-dai.1 <-> ux500-msp-i2s.3 mapping ok [ 2.656127] NET: Registered protocol family 10 [ 2.672210] sit: IPv6 over IPv4 tunneling driver [ 2.678466] NET: Registered protocol family 17 [ 2.683044] NET: Registered protocol family 35 [ 2.687622] NET: Registered protocol family 37 [ 2.692382] Registering SWP/SWPB emulation handler [ 2.709869] coresight-etm3x 801ae000.ptm: PTM 1.0 initialized [ 2.716064] coresight-etm3x 801af000.ptm: PTM 1.0 initialized [ 2.722808] input: gpio_keys as /devices/soc0/gpio_keys/input/input1 [ 2.729858] ab8500-rtc ab8500-rtc.0: setting system clock to 2000-04-24 21:58:20 UTC (956613500) [ 2.739105] thermal cooling_device0: thermal-cpufreq-0 bind to 0: 0-succeed [ 2.746185] thermal cooling_device0: thermal-cpufreq-0 bind to 1: 0-succeed [ 2.753204] thermal cooling_device0: thermal-cpufreq-0 bind to 2: 0-succeed [ 2.760192] db8500-cpufreq-cooling soc:cpufreq-cooling: Cooling device registered: thermal-cpufreq-0 [ 2.773712] db8500-esram12: disabling [ 2.777465] db8500-esram34: disabling [ 2.781402] V-CSI/DSI: disabling [ 2.784667] mmci-reg: disabling [ 2.787994] ALSA device list: [ 2.790985] #0: MOP500-card [ 2.794311] uart-pl011 80007000.uart: DMA channel TX dma0chan24 [ 2.800292] uart-pl011 80007000.uart: DMA channel RX dma0chan25 [ 2.806457] Waiting for root device /dev/mmcblk0p4... cu: Got hangup signal Connected. cu: waitpid: No child processes Connected.
Disconnected.
[PYBOOT] [snowball 01:53]: Timed out waiting for "<type 'str'>":
[PYBOOT] [snowball 01:54]: got exception: timeout ~$off
[PYBOOT] [snowball 01:55]: Done.