Failed boards:
bbb multi_v7_defconfig : FAILED 1:18.95 panda multi_v7_defconfig : FAILED 1:34.15
Successful boards:
apc vt8500_v6_v7_defconfig : passed 1:16.10 arndale exynos_defconfig : passed 1:00.64 bbb omap2plus_defconfig : passed 1:31.71 beaver tegra_defconfig : passed 0:51.73 beaver multi_v7_defconfig : passed 0:51.54 capri bcm_defconfig : passed 0:42.07 capri multi_v7_defconfig : passed 0:43.98 cubie sunxi_defconfig : passed 0:50.42 cubie multi_v7_defconfig : passed 0:55.78 cubie2 sunxi_defconfig : passed 0:52.48 cubie2 multi_v7_defconfig : passed 1:05.88 cubie2 multi_lpae_defconfig : passed 0:52.71 cubox dove_defconfig : warnings 1:10.05 dalmore tegra_defconfig : passed 1:17.78 dalmore multi_v7_defconfig : passed 1:17.28 dalmore multi_lpae_defconfig : passed 1:16.63 panda omap2plus_defconfig : passed 1:16.69 sama5 sama5_defconfig : passed 1:51.15 seaboard tegra_defconfig : passed 0:59.19 seaboard multi_v7_defconfig : passed 1:20.29 snow exynos_defconfig : passed 1:20.43 snowball u8500_defconfig : passed 1:24.22 snowball multi_v7_defconfig : passed 2:08.63 trimslice tegra_defconfig : passed 0:57.71 trimslice multi_v7_defconfig : passed 1:01.49 wandboard imx_v6_v7_defconfig : passed 1:11.54 wandboard multi_v7_defconfig : passed 1:07.50
Board legend is available at http://arm-soc.lixom.net/boards.html
Last entries of failed logs below:
========================================================================
Board bbb-multi_v7_defconfig failure log: -------------------------------------------------
TFTP from server 172.16.1.3; our IP address is 172.16.1.121 Filename 'arm-soc/v3.13-rc5-906-g909ab94/multi_v7_defconfig/zImage'. Load address: 0x80200000 Loading: *################################################################# ####################################node: bbb status: on ############################# ################################################################# ################################################################# ##################################### 1.2 MiB/s done Bytes transferred = 4350224 (426110 hex) U-Boot# setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 U-Boot# tftp 0x81f00000 arm-soc/v3.13-rc5-906-g909ab94/multi_v7_defconfig/dtbs/am335x-boneblack.dtb tftp 0x81f00000 arm-soc/v3.13-rc5-906-g909ab94/multi_v7_defconfig/dtbs/am335x-boneblack.dtb link up on port 0, speed 100, full duplex Using cpsw device TFTP from server 172.16.1.3; our IP address is 172.16.1.121 Filename 'arm-soc/v3.13-rc5-906-g909ab94/multi_v7_defconfig/dtbs/am335x-boneblack.dtb'. Load address: 0x81f00000 Loading: *## 448.2 KiB/s done Bytes transferred = 17911 (45f7 hex) U-Boot# setenv bootargs console=ttyO0,115200 root=/dev/mmcblk0p2 rootwait rw debug earlyprintk setenv bootargs console=ttyO0,115200 root=/dev/mmcblk0p2 rootwait rw debug earlyprintk U-Boot# printenv bootargs printenv bootargs bootargs=console=ttyO0,115200 root=/dev/mmcblk0p2 rootwait rw debug earlyprintk U-Boot# bootz 0x80200000 - 0x81f00000 bootz 0x80200000 - 0x81f00000 ## Flattened Device Tree blob at 81f00000 Booting using the fdt blob at 0x81f00000 Using Device Tree in place at 81f00000, end 81f075f6
Starting kernel ...
~$off # PYBOOT: Exception: timeout
========================================================================
Board panda-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.422424] platform 4809c000.mmc: Driver omap_hsmmc requests probe deferral [ 1.429840] omap_hsmmc 480d5000.mmc: could not find pctldev for node /ocp/pinmux@4a100040/pinmux_wl12xx_pins, deferring probe [ 1.441741] platform 480d5000.mmc: Driver omap_hsmmc requests probe deferral [ 1.449401] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.456237] usbcore: registered new interface driver usbhid [ 1.462066] usbhid: USB HID core driver [ 1.469085] TCP: cubic registered [ 1.472564] NET: Registered protocol family 17 [ 1.477416] Key type dns_resolver registered [ 1.482299] Power Management for TI OMAP4+ devices. [ 1.487457] Power Management for TI OMAP4. [ 1.491760] OMAP4 PM: u-boot >= v2012.07 is required for full PM support [ 1.498901] Registering SWP/SWPB emulation handler [ 1.504730] reg-fixed-voltage wl12xx_vmmc.10: could not find pctldev for node /ocp/pinmux@4a100040/pinmux_wl12xx_gpio, deferring probe [ 1.517547] platform wl12xx_vmmc.10: Driver reg-fixed-voltage requests probe deferral [ 1.526184] omap_i2c 48070000.i2c: could not find pctldev for node /ocp/pinmux@4a100040/pinmux_i2c1_pins, deferring probe [ 1.537689] platform 48070000.i2c: Driver omap_i2c requests probe deferral [ 1.537780] omap_i2c 48072000.i2c: could not find pctldev for node /ocp/pinmux@4a100040/pinmux_i2c2_pins, deferring probe [ 1.556732] platform 48072000.i2c: Driver omap_i2c requests probe deferral [ 1.556823] omap_i2c 48060000.i2c: could not find pctldev for node /ocp/pinmux@4a100040/pinmux_i2c3_pins, deferring probe [ 1.575744] platform 48060000.i2c: Driver omap_i2c requests probe deferral [ 1.583251] omap_i2c 48350000.i2c: could not find pctldev for node /ocp/pinmux@4a100040/pinmux_i2c4_pins, deferring probe [ 1.594757] platform 48350000.i2c: Driver omap_i2c requests probe deferral [ 1.602508] omap-dma-engine 4a056000.dma-controller: allocating channel for 62 [ 1.610198] omap-dma-engine 4a056000.dma-controller: allocating channel for 61 [ 1.617797] omap_hsmmc 4809c000.mmc: vmmc regulator missing [ 1.617889] omap-dma-engine 4a056000.dma-controller: freeing channel for 61 [ 1.630981] omap-dma-engine 4a056000.dma-controller: freeing channel for 62 [ 1.638336] platform 4809c000.mmc: Driver omap_hsmmc requests probe deferral [ 1.646057] omap_hsmmc 480d5000.mmc: could not find pctldev for node /ocp/pinmux@4a100040/pinmux_wl12xx_pins, deferring probe [ 1.657928] platform 480d5000.mmc: Driver omap_hsmmc requests probe deferral [ 1.665679] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 1.674377] spear_cpufreq: Invalid cpufreq_tbl [ 1.678985] ALSA device list: [ 1.682373] No soundcards found. [ 1.686401] omap_uart 48020000.serial: no wakeirq for uart2 [ 1.692352] usb 1-1: new high-speed USB device number 2 using ehci-omap [ 1.692352] Waiting for root device /dev/mmcblk0p2... ~$off # PYBOOT: Exception: timeout