Full logs are available at http://arm-soc.lixom.net/bootlogs/mainline/v4.6-3623-g0b7962a/
Failed boards:
arndale multi_v7_nosmp_defconfig : NO BUILD bbb arm-omap2plus_defconfig : FAILED 1:53.90 bbb arm-multi_v7_defconfig : FAILED 1:59.39 bbb multi_v7_nosmp_defconfig : NO BUILD beagleboard-x15 arm-omap2plus_defconfig : FAILED 1:44.16 beagleboard-x15 arm-multi_v7_defconfig : FAILED 1:44.84 beagleboard-x15 arm-multi_lpae_defconfig : FAILED 1:49.50 beagleboard-x15 multi_v7_nosmp_defconfig : NO BUILD beaver multi_v7_nosmp_defconfig : NO BUILD capri multi_v7_nosmp_defconfig : NO BUILD chitra powerpc-pasemi_defconfig : BUILD FAILED colibri-vf61 multi_v7_nosmp_defconfig : NO BUILD colombus multi_v7_nosmp_defconfig : NO BUILD cosmic arm-imx_v6_v7_defconfig : FAILED 2:01.38 cosmic arm-multi_v7_defconfig : FAILED 2:08.67 cosmic multi_v7_nosmp_defconfig : NO BUILD cubie multi_v7_nosmp_defconfig : NO BUILD cubie2 multi_v7_nosmp_defconfig : NO BUILD cubox multi_v7_nosmp_defconfig : NO BUILD dalmore arm-tegra_defconfig : FAILED 1:48.75 dalmore arm-multi_v7_defconfig : FAILED 1:57.98 dalmore arm-multi_lpae_defconfig : FAILED 2:07.94 dalmore multi_v7_nosmp_defconfig : NO BUILD hummingboard multi_v7_nosmp_defconfig : NO BUILD jetsontk1 multi_v7_nosmp_defconfig : NO BUILD minnowmax minnowmax_defconfig : NO BUILD odroidu3 arm-exynos_defconfig : FAILED 1:49.45 omap5uevm arm-omap2plus_defconfig : FAILED 2:04.07 omap5uevm arm-multi_v7_defconfig : FAILED 2:06.44 omap5uevm arm-multi_lpae_defconfig : FAILED 2:12.68 omap5uevm multi_v7_nosmp_defconfig : NO BUILD pandaes multi_v7_nosmp_defconfig : NO BUILD parallella multi_v7_nosmp_defconfig : NO BUILD pi arm-multi_lpae_defconfig : FAILED 1:59.39 pi multi_v7_nosmp_defconfig : NO BUILD pit multi_v7_nosmp_defconfig : NO BUILD rk3288evb multi_v7_nosmp_defconfig : NO BUILD seaboard multi_v7_nosmp_defconfig : NO BUILD snow multi_v7_nosmp_defconfig : NO BUILD snowball arm-u8500_defconfig : FAILED 1:56.69 snowball arm-multi_v7_defconfig : FAILED 2:06.91 snowball multi_v7_nosmp_defconfig : NO BUILD socfpga multi_v7_nosmp_defconfig : NO BUILD trimslice multi_v7_nosmp_defconfig : NO BUILD wandboard multi_v7_nosmp_defconfig : NO BUILD
Successful boards:
apc arm-vt8500_v6_v7_defconfig : passed 1:13.38 arndale arm-exynos_defconfig : passed 1:31.53 arndale arm-multi_v7_defconfig : passed 1:21.71 arndale arm-multi_lpae_defconfig : passed 1:27.68 capri arm-bcm_defconfig : passed 0:51.03 capri arm-multi_v7_defconfig : passed 0:56.96 chitra powerpc-ppc64_defconfig : passed 3:09.47 colombus arm-sunxi_defconfig : passed 2:30.08 colombus arm-multi_v7_defconfig : passed 2:38.42 colombus arm-multi_lpae_defconfig : passed 2:36.08 cubie arm-sunxi_defconfig : passed 0:52.34 cubie arm-multi_v7_defconfig : passed 0:51.23 cubie2 arm-sunxi_defconfig : passed 0:48.54 cubie2 arm-multi_v7_defconfig : passed 1:06.51 cubie2 arm-multi_lpae_defconfig : passed 0:54.39 cubox arm-multi_v7_defconfig : passed 1:14.09 cubox arm-mvebu_v7_defconfig : passed 1:06.61 hummingboard arm-imx_v6_v7_defconfig : passed 1:32.23 hummingboard arm-multi_v7_defconfig : passed 1:31.60 jetsontk1 arm-tegra_defconfig : passed 1:35.93 jetsontk1 arm-multi_v7_defconfig : passed 1:42.92 jetsontk1 arm-multi_lpae_defconfig : passed 1:41.57 pandaes arm-omap2plus_defconfig : warnings 1:37.39 pandaes arm-multi_v7_defconfig : passed 1:45.12 pi arm-exynos_defconfig : passed 2:13.67 pit arm-exynos_defconfig : passed 2:12.98 pit arm-multi_v7_defconfig : passed 2:14.49 pit arm-multi_lpae_defconfig : passed 2:26.26 seattle arm64-defconfig : warnings 2:22.70 snow arm-exynos_defconfig : passed 2:11.88 snow arm-multi_v7_defconfig : passed 2:04.11 snow arm-multi_lpae_defconfig : passed 1:59.43 trimslice arm-tegra_defconfig : passed 1:32.54 trimslice arm-multi_v7_defconfig : passed 1:34.87 wandboard arm-imx_v6_v7_defconfig : passed 1:14.42 wandboard arm-multi_v7_defconfig : passed 1:03.43
Offline boards:
beaver arm-tegra_defconfig : OFFLINE 2:13.52 beaver arm-multi_v7_defconfig : OFFLINE 2:15.21 colibri-vf61 arm-imx_v6_v7_defconfig : OFFLINE 2:12.67 colibri-vf61 arm-multi_v7_defconfig : OFFLINE 2:24.21 parallella arm-multi_v7_defconfig : OFFLINE 2:16.03 pi arm-multi_v7_defconfig : OFFLINE 2:05.33 rk3288evb arm-multi_v7_defconfig : OFFLINE 0:51.57 rk3288evb arm-multi_lpae_defconfig : OFFLINE 1:04.30 sama5 arm-sama5_defconfig : OFFLINE 2:24.39 sama5d3-xplained arm-sama5_defconfig : OFFLINE 2:14.28 seaboard arm-tegra_defconfig : OFFLINE 2:22.45 seaboard arm-multi_v7_defconfig : OFFLINE 2:15.97 socfpga arm-socfpga_defconfig : OFFLINE 2:19.14 socfpga arm-multi_v7_defconfig : OFFLINE 2:25.30
Board legend is available at http://arm-soc.lixom.net/boards.html
Board bbb-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.558475] omap_hsmmc 48060000.mmc: Got CD GPIO [ 1.623485] Synopsys Designware Multimedia Card Interface Driver [ 1.631410] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.641760] ledtrig-cpu: registered to indicate activity on CPUs [ 1.648867] usbcore: registered new interface driver usbhid [ 1.654796] usbhid: USB HID core driver [ 1.666919] NET: Registered protocol family 10 [ 1.673497] sit: IPv6 over IPv4 tunneling driver [ 1.679654] NET: Registered protocol family 17 [ 1.684427] can: controller area network core (rev 20120528 abi 9) [ 1.691066] NET: Registered protocol family 29 [ 1.695784] can: raw protocol (rev 20120528) [ 1.700303] can: broadcast manager protocol (rev 20120528 t) [ 1.706307] can: netlink gateway (rev 20130117) max_hops=1 [ 1.713017] Key type dns_resolver registered [ 1.717921] omap_voltage_late_init: Voltage driver support not added [ 1.724908] ThumbEE CPU extension supported. [ 1.729465] Registering SWP/SWPB emulation handler [ 1.773539] tps65217 0-0024: TPS65217 ID 0xe version 1.2 [ 1.780075] at24 0-0050: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.787814] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 1.796537] at24 2-0054: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.804448] at24 2-0055: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.812347] at24 2-0056: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.820154] at24 2-0057: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.827509] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz [ 1.834640] hctosys: unable to open rtc device (rtc0) [ 1.848177] Waiting for root device /dev/mmcblk0p2... [ 1.853933] mmc1: new high speed MMC card at address 0001 [ 1.860712] mmcblk1: mmc1:0001 MMC02G 1.79 GiB [ 1.865992] mmcblk1boot0: mmc1:0001 MMC02G partition 1 1.00 MiB [ 1.872663] mmcblk1boot1: mmc1:0001 MMC02G partition 2 1.00 MiB [ 1.881277] mmcblk1: p1 p2
[PYBOOT] [bbb 01:56]: Timed out waiting for "<type 'str'>":
[PYBOOT] [bbb 01:57]: got exception: timeout ~$off
[PYBOOT] [bbb 01:58]: Done. Board bbb-arm-omap2plus_defconfig failure log: -------------------------------------------------
[ 2.053353] omap_hsmmc 481d8000.mmc: lookup for GPIO cd failed [ 2.059483] omap_hsmmc 481d8000.mmc: GPIO lookup for consumer wp [ 2.065822] omap_hsmmc 481d8000.mmc: using device tree for GPIO lookup [ 2.072709] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@481d8000[0]' [ 2.082317] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@481d8000[0]' [ 2.091831] omap_hsmmc 481d8000.mmc: using lookup tables for GPIO lookup [ 2.098858] omap_hsmmc 481d8000.mmc: lookup for GPIO wp failed [ 2.142063] ledtrig-cpu: registered to indicate activity on CPUs [ 2.150767] oprofile: using arm/armv7 [ 2.155894] Initializing XFRM netlink socket [ 2.161008] NET: Registered protocol family 10 [ 2.171845] sit: IPv6 over IPv4 tunneling driver [ 2.180644] NET: Registered protocol family 17 [ 2.185603] NET: Registered protocol family 15 [ 2.190861] Key type dns_resolver registered [ 2.195746] omap_voltage_late_init: Voltage driver support not added [ 2.202500] sr_dev_init: No voltage domain specified for smartreflex0. Cannot initialize [ 2.210981] sr_dev_init: No voltage domain specified for smartreflex1. Cannot initialize [ 2.220606] ThumbEE CPU extension supported. [ 2.225254] Registering SWP/SWPB emulation handler [ 2.230297] SmartReflex Class3 initialized [ 2.302961] mmc1: new high speed MMC card at address 0001 [ 2.314935] tps65217 0-0024: TPS65217 ID 0xe version 1.2 [ 2.322462] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 2.330428] mmcblk1: mmc1:0001 MMC02G 1.79 GiB [ 2.337747] mmcblk1boot0: mmc1:0001 MMC02G partition 1 1.00 MiB [ 2.349734] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz [ 2.357120] mmcblk1boot1: mmc1:0001 MMC02G partition 2 1.00 MiB [ 2.367905] hctosys: unable to open rtc device (rtc0) [ 2.373376] sr_init: No PMIC hook to init smartreflex [ 2.379051] sr_init: platform driver register failed for SR [ 2.422552] mmcblk1: p1 p2 [ 2.440320] Waiting for root device /dev/mmcblk0p2...
[PYBOOT] [bbb 01:51]: Timed out waiting for "<type 'str'>":
[PYBOOT] [bbb 01:52]: got exception: timeout ~$off
[PYBOOT] [bbb 01:53]: Done. Board beagleboard-x15-arm-multi_lpae_defconfig failure log: -------------------------------------------------
[ 1.731817] palmas-rtc 48070000.i2c:tps659038@58:tps659038_rtc: rtc core: registered 48070000.i2c:tps659 as rtc1 [ 1.746535] at24 0-0050: 4096 byte 24c32 EEPROM, writable, 1 bytes/write [ 1.753612] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 1.780804] rtc-ds1307 2-006f: SET TIME! [ 1.786562] rtc-ds1307 2-006f: rtc core: registered mcp7941x as rtc0 [ 1.793314] rtc-ds1307 2-006f: 64 bytes nvram [ 1.797926] omap_i2c 48060000.i2c: bus 2 rev0.12 at 400 kHz [ 1.806134] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 1.811920] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 [ 1.820170] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x00010010 [ 1.829342] xhci-hcd xhci-hcd.0.auto: irq 400, io mem 0x48890000 [ 1.836221] hub 1-0:1.0: USB hub found [ 1.840172] hub 1-0:1.0: 1 port detected [ 1.844572] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 1.850360] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 [ 1.858473] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.867484] hub 2-0:1.0: USB hub found [ 1.871452] hub 2-0:1.0: 1 port detected [ 1.877483] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 1.941796] rtc-ds1307 2-006f: setting system clock to 2001-01-01 00:00:00 UTC (978307200) [ 1.959602] aic_dvdd_fixed: disabling [ 1.964343] Waiting for root device /dev/mmcblk0p1... [ 1.987373] mmc1: new high speed MMC card at address 0001 [ 1.993396] mmcblk1: mmc1:0001 S10004 3.56 GiB [ 1.998317] mmcblk1boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 2.004675] mmcblk1boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 2.011593] mmcblk1: p1 [ 2.150298] usb 1-1: new high-speed USB device number 2 using xhci-hcd [ 2.185331] usb 2-1: new SuperSpeed USB device number 2 using xhci-hcd [ 2.210601] hub 2-1:1.0: USB hub found [ 2.214571] hub 2-1:1.0: 4 ports detected [ 2.306601] hub 1-1:1.0: USB hub found [ 2.310585] hub 1-1:1.0: 4 ports detected
[PYBOOT] [beagleboard-x15 01:46]: Timed out waiting for "<type 'str'>":
[PYBOOT] [beagleboard-x15 01:47]: got exception: timeout ~$off
[PYBOOT] [beagleboard-x15 01:48]: Done. Board beagleboard-x15-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.726140] palmas-rtc 48070000.i2c:tps659038@58:tps659038_rtc: rtc core: registered 48070000.i2c:tps659 as rtc1 [ 1.740866] at24 0-0050: 4096 byte 24c32 EEPROM, writable, 1 bytes/write [ 1.747932] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 1.770732] rtc-ds1307 2-006f: SET TIME! [ 1.776487] rtc-ds1307 2-006f: rtc core: registered mcp7941x as rtc0 [ 1.783244] rtc-ds1307 2-006f: 64 bytes nvram [ 1.787859] omap_i2c 48060000.i2c: bus 2 rev0.12 at 400 kHz [ 1.796068] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 1.801849] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 [ 1.810094] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x00010010 [ 1.819252] xhci-hcd xhci-hcd.0.auto: irq 400, io mem 0x48890000 [ 1.826135] hub 1-0:1.0: USB hub found [ 1.830091] hub 1-0:1.0: 1 port detected [ 1.834503] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 1.840286] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 [ 1.848394] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.857414] hub 2-0:1.0: USB hub found [ 1.861379] hub 2-0:1.0: 1 port detected [ 1.867411] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 1.931744] rtc-ds1307 2-006f: setting system clock to 2001-01-01 00:00:00 UTC (978307200) [ 1.949966] aic_dvdd_fixed: disabling [ 1.954703] Waiting for root device /dev/mmcblk0p1... [ 1.987305] mmc1: new high speed MMC card at address 0001 [ 1.993340] mmcblk1: mmc1:0001 S10004 3.56 GiB [ 1.998239] mmcblk1boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 2.004603] mmcblk1boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 2.011532] mmcblk1: p1 [ 2.140238] usb 1-1: new high-speed USB device number 2 using xhci-hcd [ 2.175265] usb 2-1: new SuperSpeed USB device number 2 using xhci-hcd [ 2.200532] hub 2-1:1.0: USB hub found [ 2.204501] hub 2-1:1.0: 4 ports detected [ 2.296537] hub 1-1:1.0: USB hub found [ 2.300525] hub 1-1:1.0: 4 ports detected
[PYBOOT] [beagleboard-x15 01:42]: Timed out waiting for "<type 'str'>":
[PYBOOT] [beagleboard-x15 01:43]: got exception: timeout ~$off
[PYBOOT] [beagleboard-x15 01:44]: Done. Board beagleboard-x15-arm-omap2plus_defconfig failure log: -------------------------------------------------
[ 2.226998] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer cd [ 2.233297] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 2.240193] of_get_named_gpiod_flags: parsed 'cd-gpios' property of node '/ocp/mmc@4809c000[0]' - status (0) [ 2.250588] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 2.255461] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer wp [ 2.261768] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 2.268633] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@4809c000[0]' [ 2.278226] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@4809c000[0]' [ 2.287732] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 2.294795] omap_hsmmc 4809c000.mmc: lookup for GPIO wp failed [ 2.345230] omap_hsmmc 480b4000.mmc: GPIO lookup for consumer cd [ 2.351526] omap_hsmmc 480b4000.mmc: using device tree for GPIO lookup [ 2.358401] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/ocp/mmc@480b4000[0]' [ 2.368000] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/ocp/mmc@480b4000[0]' [ 2.377498] omap_hsmmc 480b4000.mmc: using lookup tables for GPIO lookup [ 2.384543] omap_hsmmc 480b4000.mmc: lookup for GPIO cd failed [ 2.390662] omap_hsmmc 480b4000.mmc: GPIO lookup for consumer wp [ 2.396974] omap_hsmmc 480b4000.mmc: using device tree for GPIO lookup [ 2.403819] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@480b4000[0]' [ 2.413415] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@480b4000[0]' [ 2.422926] omap_hsmmc 480b4000.mmc: using lookup tables for GPIO lookup [ 2.429974] omap_hsmmc 480b4000.mmc: lookup for GPIO wp failed [ 2.475345] hctosys: unable to open rtc device (rtc0) [ 2.480647] sr_init: No PMIC hook to init smartreflex [ 2.486169] sr_init: platform driver register failed for SR [ 2.532657] aic_dvdd_fixed: disabling [ 2.536901] ldousb: disabling [ 2.545236] Waiting for root device /dev/mmcblk0p1... [ 2.596920] mmc1: new high speed MMC card at address 0001 [ 2.604943] mmcblk1: mmc1:0001 S10004 3.56 GiB [ 2.610342] mmcblk1boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 2.617192] mmcblk1boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 2.625702] mmcblk1: p1
[PYBOOT] [beagleboard-x15 01:41]: Timed out waiting for "<type 'str'>":
[PYBOOT] [beagleboard-x15 01:42]: got exception: timeout ~$off
[PYBOOT] [beagleboard-x15 01:43]: Done. Board cosmic-arm-imx_v6_v7_defconfig failure log: -------------------------------------------------
[ 14.458271] blk_update_request: I/O error, dev mmcblk0, sector 3633185 [ 18.532504] mmcblk0: error -110 transferring data, sector 3633186, nr 230, cmd response 0x900, card status 0x0 [ 18.542834] blk_update_request: I/O error, dev mmcblk0, sector 3633186 [ 22.617061] mmcblk0: error -110 transferring data, sector 3633187, nr 229, cmd response 0x900, card status 0x0 [ 22.627387] blk_update_request: I/O error, dev mmcblk0, sector 3633187 [ 26.701656] mmcblk0: error -110 transferring data, sector 3633188, nr 228, cmd response 0x900, card status 0x0 [ 26.711984] blk_update_request: I/O error, dev mmcblk0, sector 3633188 [ 30.786209] mmcblk0: error -110 transferring data, sector 3633189, nr 227, cmd response 0x900, card status 0x0 [ 30.796537] blk_update_request: I/O error, dev mmcblk0, sector 3633189 [ 34.870711] mmcblk0: error -110 transferring data, sector 3633190, nr 226, cmd response 0x900, card status 0x0 [ 34.881068] blk_update_request: I/O error, dev mmcblk0, sector 3633190 [ 38.955300] mmcblk0: error -110 transferring data, sector 3633191, nr 225, cmd response 0x900, card status 0x0 [ 38.965653] blk_update_request: I/O error, dev mmcblk0, sector 3633191 [ 43.039848] mmcblk0: error -110 transferring data, sector 3633192, nr 224, cmd response 0x900, card status 0x0 [ 43.050204] blk_update_request: I/O error, dev mmcblk0, sector 3633192 [ 47.124430] mmcblk0: error -110 transferring data, sector 3633193, nr 223, cmd response 0x900, card status 0x0 [ 47.134754] blk_update_request: I/O error, dev mmcblk0, sector 3633193 [ 51.208915] mmcblk0: error -110 transferring data, sector 3633194, nr 222, cmd response 0x900, card status 0x0 [ 51.219237] blk_update_request: I/O error, dev mmcblk0, sector 3633194 [ 55.293461] mmcblk0: error -110 transferring data, sector 3633195, nr 221, cmd response 0x900, card status 0x0 [ 55.303783] blk_update_request: I/O error, dev mmcblk0, sector 3633195 [ 59.378011] mmcblk0: error -110 transferring data, sector 3633196, nr 220, cmd response 0x900, card status 0x0 [ 59.388330] blk_update_request: I/O error, dev mmcblk0, sector 3633196 [ 63.462556] mmcblk0: error -110 transferring data, sector 3633197, nr 219, cmd response 0x900, card status 0x0 [ 63.472875] blk_update_request: I/O error, dev mmcblk0, sector 3633197 [ 67.547093] mmcblk0: error -110 transferring data, sector 3633198, nr 218, cmd response 0x900, card status 0x0 [ 67.557419] blk_update_request: I/O error, dev mmcblk0, sector 3633198 [ 71.631654] mmcblk0: error -110 transferring data, sector 3633199, nr 217, cmd response 0x900, card status 0x0 [ 71.641982] blk_update_request: I/O error, dev mmcblk0, sector 3633199 [ 75.716207] mmcblk0: error -110 transferring data, sector 3633200, nr 216, cmd response 0x900, card status 0x0 [ 75.726536] blk_update_request: I/O error, dev mmcblk0, sector 3633200 [ 79.800697] mmcblk0: error -110 transferring data, sector 3633201, nr 215, cmd response 0x900, card status 0x0 [ 79.811019] blk_update_request: I/O error, dev mmcblk0, sector 3633201
[PYBOOT] [cosmic 01:58]: Timed out waiting for "<type 'str'>":
[PYBOOT] [cosmic 01:59]: got exception: timeout ~$off
[PYBOOT] [cosmic 02:00]: Done. Board cosmic-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 14.086622] blk_update_request: I/O error, dev mmcblk0, sector 3633185 [ 18.160603] mmcblk0: error -110 transferring data, sector 3633186, nr 230, cmd response 0x900, card status 0x0 [ 18.170682] blk_update_request: I/O error, dev mmcblk0, sector 3633186 [ 22.244660] mmcblk0: error -110 transferring data, sector 3633187, nr 229, cmd response 0x900, card status 0x0 [ 22.254733] blk_update_request: I/O error, dev mmcblk0, sector 3633187 [ 26.328712] mmcblk0: error -110 transferring data, sector 3633188, nr 228, cmd response 0x900, card status 0x0 [ 26.338794] blk_update_request: I/O error, dev mmcblk0, sector 3633188 [ 30.412778] mmcblk0: error -110 transferring data, sector 3633189, nr 227, cmd response 0x900, card status 0x0 [ 30.422860] blk_update_request: I/O error, dev mmcblk0, sector 3633189 [ 34.496846] mmcblk0: error -110 transferring data, sector 3633190, nr 226, cmd response 0x900, card status 0x0 [ 34.506932] blk_update_request: I/O error, dev mmcblk0, sector 3633190 [ 38.580920] mmcblk0: error -110 transferring data, sector 3633191, nr 225, cmd response 0x900, card status 0x0 [ 38.591002] blk_update_request: I/O error, dev mmcblk0, sector 3633191 [ 42.664992] mmcblk0: error -110 transferring data, sector 3633192, nr 224, cmd response 0x900, card status 0x0 [ 42.675064] blk_update_request: I/O error, dev mmcblk0, sector 3633192 [ 46.749049] mmcblk0: error -110 transferring data, sector 3633193, nr 223, cmd response 0x900, card status 0x0 [ 46.759122] blk_update_request: I/O error, dev mmcblk0, sector 3633193 [ 50.833107] mmcblk0: error -110 transferring data, sector 3633194, nr 222, cmd response 0x900, card status 0x0 [ 50.843183] blk_update_request: I/O error, dev mmcblk0, sector 3633194 [ 54.917163] mmcblk0: error -110 transferring data, sector 3633195, nr 221, cmd response 0x900, card status 0x0 [ 54.927234] blk_update_request: I/O error, dev mmcblk0, sector 3633195 [ 59.001212] mmcblk0: error -110 transferring data, sector 3633196, nr 220, cmd response 0x900, card status 0x0 [ 59.011286] blk_update_request: I/O error, dev mmcblk0, sector 3633196 [ 63.085263] mmcblk0: error -110 transferring data, sector 3633197, nr 219, cmd response 0x900, card status 0x0 [ 63.095334] blk_update_request: I/O error, dev mmcblk0, sector 3633197 [ 67.169315] mmcblk0: error -110 transferring data, sector 3633198, nr 218, cmd response 0x900, card status 0x0 [ 67.179388] blk_update_request: I/O error, dev mmcblk0, sector 3633198 [ 71.253366] mmcblk0: error -110 transferring data, sector 3633199, nr 217, cmd response 0x900, card status 0x0 [ 71.263439] blk_update_request: I/O error, dev mmcblk0, sector 3633199 [ 75.337430] mmcblk0: error -110 transferring data, sector 3633200, nr 216, cmd response 0x900, card status 0x0 [ 75.347508] blk_update_request: I/O error, dev mmcblk0, sector 3633200 [ 79.421487] mmcblk0: error -110 transferring data, sector 3633201, nr 215, cmd response 0x900, card status 0x0 [ 79.431567] blk_update_request: I/O error, dev mmcblk0, sector 3633201
[PYBOOT] [cosmic 02:05]: Timed out waiting for "<type 'str'>":
[PYBOOT] [cosmic 02:06]: got exception: timeout ~$off
[PYBOOT] [cosmic 02:07]: Done. Board dalmore-arm-multi_lpae_defconfig failure log: -------------------------------------------------
[ 2.632823] can: netlink gateway (rev 20130117) max_hops=1 [ 2.639860] Key type dns_resolver registered [ 2.646264] ThumbEE CPU extension supported. [ 2.650691] Registering SWP/SWPB emulation handler [ 2.664388] usb1_vbus: supplied by vdd-sys-5v0 [ 2.671967] usb2_vbus: supplied by vdd-sys-5v0 [ 2.688728] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 2.711988] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.718755] [drm] No driver support for vblank timestamp query. [ 2.736783] mmc1: new high speed MMC card at address 0001 [ 2.746885] mmcblk1: mmc1:0001 SEM32G 29.1 GiB [ 2.755217] mmcblk1boot0: mmc1:0001 SEM32G partition 1 4.00 MiB [ 2.764136] mmcblk1boot1: mmc1:0001 SEM32G partition 2 4.00 MiB [ 2.773745] mmcblk1rpmb: mmc1:0001 SEM32G partition 3 4.00 MiB [ 2.784309] mmcblk1: p1 [ 2.894220] Console: switching to colour frame buffer device 240x75 [ 2.981170] drm drm: fb0: frame buffer device [ 3.002609] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.017520] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.023110] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 3.031938] tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 [ 3.047636] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 3.058039] hub 1-0:1.0: USB hub found [ 3.062031] hub 1-0:1.0: 1 port detected [ 3.072096] input: gpio-keys as /devices/soc0/gpio-keys/input/input0 [ 3.085883] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 3.148982] dvdd_ts: disabling [ 3.152083] usb1_vbus: disabling [ 3.155456] vdd_cam_1v8_reg: disabling [ 3.163169] Waiting for root device /dev/mmcblk0p1... [ 3.372641] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 4.351019] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f [ 47.687582] random: nonblocking pool is initialized
[PYBOOT] [dalmore 02:04]: Timed out waiting for "<type 'str'>":
[PYBOOT] [dalmore 02:05]: got exception: timeout ~$off
[PYBOOT] [dalmore 02:06]: Done. Board dalmore-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 2.638415] can: netlink gateway (rev 20130117) max_hops=1 [ 2.645413] Key type dns_resolver registered [ 2.651894] ThumbEE CPU extension supported. [ 2.656320] Registering SWP/SWPB emulation handler [ 2.676918] usb1_vbus: supplied by vdd-sys-5v0 [ 2.687143] usb2_vbus: supplied by vdd-sys-5v0 [ 2.704989] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 2.729493] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.736283] [drm] No driver support for vblank timestamp query. [ 2.748972] mmc1: new high speed MMC card at address 0001 [ 2.758220] mmcblk1: mmc1:0001 SEM32G 29.1 GiB [ 2.766582] mmcblk1boot0: mmc1:0001 SEM32G partition 1 4.00 MiB [ 2.776252] mmcblk1boot1: mmc1:0001 SEM32G partition 2 4.00 MiB [ 2.785896] mmcblk1rpmb: mmc1:0001 SEM32G partition 3 4.00 MiB [ 2.796692] mmcblk1: p1 [ 2.916046] Console: switching to colour frame buffer device 240x75 [ 3.002863] drm drm: fb0: frame buffer device [ 3.022717] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.037719] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.043380] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 3.052051] tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 [ 3.067726] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 3.078098] hub 1-0:1.0: USB hub found [ 3.082105] hub 1-0:1.0: 1 port detected [ 3.092718] input: gpio-keys as /devices/soc0/gpio-keys/input/input0 [ 3.107522] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 3.170171] dvdd_ts: disabling [ 3.173431] usb1_vbus: disabling [ 3.176693] vdd_cam_1v8_reg: disabling [ 3.184199] Waiting for root device /dev/mmcblk0p1... [ 3.398041] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 4.380196] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f [ 64.781487] random: nonblocking pool is initialized
[PYBOOT] [dalmore 01:55]: Timed out waiting for "<type 'str'>":
[PYBOOT] [dalmore 01:56]: got exception: timeout ~$off
[PYBOOT] [dalmore 01:57]: Done. Board dalmore-arm-tegra_defconfig failure log: -------------------------------------------------
[ 2.886024] Bluetooth: RFCOMM socket layer initialized [ 2.891272] Bluetooth: RFCOMM ver 1.11 [ 2.895214] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 2.900612] Bluetooth: BNEP socket layer initialized [ 2.905702] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 2.911698] Bluetooth: HIDP socket layer initialized [ 2.918662] Key type dns_resolver registered [ 2.928228] Registering SWP/SWPB emulation handler [ 2.956562] usb1_vbus: supplied by vdd-sys-5v0 [ 2.964642] usb2_vbus: supplied by vdd-sys-5v0 [ 2.976725] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 3.002891] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.009833] [drm] No driver support for vblank timestamp query. [ 3.188543] Console: switching to colour frame buffer device 240x75 [ 3.275970] drm drm: fb0: frame buffer device [ 3.305309] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.314559] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.320410] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 3.330822] tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 [ 3.355317] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 3.369473] hub 1-0:1.0: USB hub found [ 3.373456] hub 1-0:1.0: 1 port detected [ 3.387003] input: gpio-keys as /devices/soc0/gpio-keys/input/input1 [ 3.402965] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:01 UTC (946684801) [ 3.490924] dvdd_ts: disabling [ 3.494038] usb1_vbus: disabling [ 3.497448] vdd_cam_1v8_reg: disabling [ 3.502128] ALSA device list: [ 3.505197] #0: NVIDIA Tegra Dalmore [ 3.511007] Waiting for root device /dev/mmcblk0p1... [ 3.695310] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 4.728948] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f [ 62.171418] random: nonblocking pool is initialized
[PYBOOT] [dalmore 01:45]: Timed out waiting for "<type 'str'>":
[PYBOOT] [dalmore 01:46]: got exception: timeout ~$off
[PYBOOT] [dalmore 01:47]: Done. Board odroidu3-arm-exynos_defconfig failure log: -------------------------------------------------
[ 1.819282] usb 1-3: new high-speed USB device number 2 using exynos-ehci [ 1.826077] dwmmc_exynos 12550000.mmc: DW MMC controller at irq 107,32 bit host data width,128 deep fifo [ 1.835705] dwmmc_exynos 12550000.mmc: allocated mmc-pwrseq [ 1.867885] dwmmc_exynos 12550000.mmc: 1 slots initialized [ 1.869084] usbcore: registered new interface driver usbhid [ 1.873290] usbhid: USB HID core driver [ 1.884038] NET: Registered protocol family 10 [ 1.884657] sit: IPv6 over IPv4 tunneling driver [ 1.887922] NET: Registered protocol family 17 [ 1.891893] NET: Registered protocol family 15 [ 1.896373] Key type dns_resolver registered [ 1.900692] Registering SWP/SWPB emulation handler [ 1.916525] s3c-rtc 10070000.rtc: rtc disabled, re-enabling [ 1.916797] s3c-rtc 10070000.rtc: rtc core: registered s3c as rtc1 [ 1.948417] max98090 1-0010: MAX98090 REVID=0x43 [ 1.950673] max98090 1-0010: use default 2.8v micbias [ 1.953338] mmc_host mmc1: Bus speed (slot 0) = 44000000Hz (slot req 52000000Hz, actual 44000000HZ div = 0) [ 1.962318] mmc_host mmc1: Bus speed (slot 0) = 73333333Hz (slot req 52000000Hz, actual 36666666HZ div = 1) [ 1.972180] mmc1: new DDR MMC card at address 0001 [ 1.981441] asoc-simple-card sound: HiFi <-> 3830000.i2s mapping ok [ 1.984875] mmcblk1: mmc1:0001 008G92 7.28 GiB [ 1.988539] input: gpio_keys as /devices/platform/gpio_keys/input/input0 [ 1.994228] mmcblk1boot0: mmc1:0001 008G92 partition 1 4.00 MiB [ 2.000305] mmcblk1boot1: mmc1:0001 008G92 partition 2 4.00 MiB [ 2.006126] mmcblk1rpmb: mmc1:0001 008G92 partition 3 512 KiB [ 2.012705] mmcblk1: p1 p2 [ 2.038668] max77686-rtc max77686-rtc: setting system clock to 2000-01-01 01:00:19 UTC (946688419) [ 2.056578] VDD10_HDMI_1.0V: disabling [ 2.057278] vdd_g3d: disabling [ 2.058354] BUCK8_2.8V: disabling [ 2.064317] ALSA device list: [ 2.063996] #0: Odroid-U3 [ 2.067686] Waiting for root device /dev/mmcblk0p2...
[PYBOOT] [odroidu3 01:46]: Timed out waiting for "<type 'str'>":
[PYBOOT] [odroidu3 01:47]: got exception: timeout ~$off
[PYBOOT] [odroidu3 01:48]: Done. Board omap5uevm-arm-multi_lpae_defconfig failure log: -------------------------------------------------
[ 1.930071] mmcblk0: mmc0:0001 SEM04G 3.69 GiB [ 1.935001] mmcblk0boot0: mmc0:0001 SEM04G partition 1 2.00 MiB [ 1.941447] mmcblk0boot1: mmc0:0001 SEM04G partition 2 2.00 MiB [ 1.949882] smps6: Bringing 1350000uV into 1200000-1200000uV [ 1.958180] smsc95xx v1.0.4 [ 1.963228] smps9: Bringing 0uV into 2100000-2100000uV [ 1.971449] ldo1: Bringing 0uV into 1800000-1800000uV [ 1.978014] ldo2: Bringing 0uV into 2800000-2800000uV [ 1.986087] ldo4: Bringing 0uV into 1800000-1800000uV [ 1.997256] ldo7: Bringing 0uV into 2000000-2000000uV [ 2.005447] ldo9: bypassed regulator has no supply! [ 2.010588] ldo9: failed to get the current voltage(-517) [ 2.016258] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 2.031574] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 2.055044] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 2.058827] smsc95xx 1-3:1.0 eth0: register 'smsc95xx' at usb-4a064c00.ehci-3, smsc95xx USB 2.0 Ethernet, d2:4e:ff:14:28:14 [ 2.073098] omap-dwc3 4a020000.omap_dwc3: vbus init failed [ 2.102967] smps9: Bringing 0uV into 2100000-2100000uV [ 2.121713] ldo9: bypassed regulator has no supply! [ 2.126837] ldo9: failed to get the current voltage(-517) [ 2.132505] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 2.146995] palmas-rtc 48070000.i2c:palmas@48:rtc: setting system clock to 2000-01-01 03:44:46 UTC (946698286) [ 2.162711] pbias_mmc_omap5: disabling [ 2.166664] vmmcsdio_fixed: disabling [ 2.171215] Waiting for root device /dev/mmcblk1p2... [ 2.289288] usb 1-2: new high-speed USB device number 3 using ehci-omap [ 2.425116] hub 1-2:1.0: USB hub found [ 2.429133] hub 1-2:1.0: 3 ports detected [ 2.434853] omap-dwc3 4a020000.omap_dwc3: vbus init failed [ 2.463010] smps9: Bringing 0uV into 2100000-2100000uV [ 2.481772] ldo9: bypassed regulator has no supply! [ 2.486893] ldo9: failed to get the current voltage(-517) [ 2.492564] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator
[PYBOOT] [omap5uevm 02:09]: Timed out waiting for "<type 'str'>":
[PYBOOT] [omap5uevm 02:10]: got exception: timeout ~$off
[PYBOOT] [omap5uevm 02:11]: Done. Board omap5uevm-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.968230] ldo1: Bringing 0uV into 1800000-1800000uV [ 1.974784] ldo2: Bringing 0uV into 2800000-2800000uV [ 1.982814] ldo4: Bringing 0uV into 1800000-1800000uV [ 1.993913] ldo7: Bringing 0uV into 2000000-2000000uV [ 2.002091] ldo9: bypassed regulator has no supply! [ 2.007210] ldo9: failed to get the current voltage(-517) [ 2.012876] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 2.028054] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 2.029002] smsc95xx v1.0.4 [ 2.055035] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 2.061428] omap-dwc3 4a020000.omap_dwc3: vbus init failed [ 2.088701] smps9: Bringing 0uV into 2100000-2100000uV [ 2.094299] smsc95xx 1-3:1.0 eth0: register 'smsc95xx' at usb-4a064c00.ehci-3, smsc95xx USB 2.0 Ethernet, 8e:96:ea:7b:32:5a [ 2.119633] ldo9: bypassed regulator has no supply! [ 2.124760] ldo9: failed to get the current voltage(-517) [ 2.130425] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 2.144486] omap-dwc3 4a020000.omap_dwc3: vbus init failed [ 2.172958] smps9: Bringing 0uV into 2100000-2100000uV [ 2.191966] ldo9: bypassed regulator has no supply! [ 2.197091] ldo9: failed to get the current voltage(-517) [ 2.202754] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 2.217237] palmas-rtc 48070000.i2c:palmas@48:rtc: setting system clock to 2000-01-01 03:42:19 UTC (946698139) [ 2.232960] pbias_mmc_omap5: disabling [ 2.236918] vmmcsdio_fixed: disabling [ 2.241485] Waiting for root device /dev/mmcblk1p2... [ 2.354266] usb 1-2: new high-speed USB device number 3 using ehci-omap [ 2.490164] hub 1-2:1.0: USB hub found [ 2.494175] hub 1-2:1.0: 3 ports detected [ 2.500086] omap-dwc3 4a020000.omap_dwc3: vbus init failed [ 2.528046] smps9: Bringing 0uV into 2100000-2100000uV [ 2.547097] ldo9: bypassed regulator has no supply! [ 2.552215] ldo9: failed to get the current voltage(-517) [ 2.557875] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator
[PYBOOT] [omap5uevm 02:03]: Timed out waiting for "<type 'str'>":
[PYBOOT] [omap5uevm 02:04]: got exception: timeout ~$off
[PYBOOT] [omap5uevm 02:05]: Done. Board omap5uevm-arm-omap2plus_defconfig failure log: -------------------------------------------------
[ 2.374945] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 2.374952] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@4809c000[0]' [ 2.374957] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@4809c000[0]' [ 2.374961] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 2.374967] omap_hsmmc 4809c000.mmc: lookup for GPIO wp failed [ 2.494622] omap_hsmmc 480ad000.mmc: GPIO lookup for consumer wp [ 2.500919] omap_hsmmc 480ad000.mmc: using device tree for GPIO lookup [ 2.507780] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@480ad000[0]' [ 2.517373] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@480ad000[0]' [ 2.526866] omap_hsmmc 480ad000.mmc: using lookup tables for GPIO lookup [ 2.533906] omap_hsmmc 480ad000.mmc: lookup for GPIO wp failed [ 2.554568] smps9: Bringing 0uV into 2100000-2100000uV [ 2.583312] ldo9: bypassed regulator has no supply! [ 2.588437] ldo9: failed to get the current voltage(-517) [ 2.594111] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 2.613939] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer cd [ 2.620233] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 2.627095] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/ocp/mmc@4809c000[0]' [ 2.636683] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/ocp/mmc@4809c000[0]' [ 2.646173] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 2.653192] omap_hsmmc 4809c000.mmc: lookup for GPIO cd failed [ 2.659324] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer wp [ 2.665629] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 2.672475] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@4809c000[0]' [ 2.682067] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@4809c000[0]' [ 2.691558] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 2.698593] omap_hsmmc 4809c000.mmc: lookup for GPIO wp failed [ 2.744595] hctosys: unable to open rtc device (rtc0) [ 2.749894] sr_init: No PMIC hook to init smartreflex [ 2.755405] sr_init: platform driver register failed for SR [ 2.783885] pbias_mmc_omap5: disabling [ 2.787834] vmmcsdio_fixed: disabling [ 2.794003] Waiting for root device /dev/mmcblk1p2...
[PYBOOT] [omap5uevm 02:01]: Timed out waiting for "<type 'str'>":
[PYBOOT] [omap5uevm 02:02]: got exception: timeout ~$off
[PYBOOT] [omap5uevm 02:03]: Done. Board pi-arm-multi_lpae_defconfig failure log: -------------------------------------------------
[ 1.522551] isl29018 7-0044: No cache defaults, reading back from HW [ 1.528904] isl29018 7-0044: Failed to read 1: -6 [ 1.533485] isl29018 7-0044: regmap initialization fails: -6 [ 1.543718] NET: Registered protocol family 10 [ 1.548164] sit: IPv6 over IPv4 tunneling driver [ 1.551749] NET: Registered protocol family 17 [ 1.555751] can: controller area network core (rev 20120528 abi 9) [ 1.561939] NET: Registered protocol family 29 [ 1.566330] can: raw protocol (rev 20120528) [ 1.570579] can: broadcast manager protocol (rev 20120528 t) [ 1.576222] can: netlink gateway (rev 20130117) max_hops=1 [ 1.581942] Key type dns_resolver registered [ 1.586274] ThumbEE CPU extension supported. [ 1.590171] Registering SWP/SWPB emulation handler [ 1.599987] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.605477] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.611838] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.617214] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 1.627289] input: gpio-keys as /devices/platform/gpio-keys/input/input1 [ 1.637458] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.642905] mmc_host mmc0: Bus speed (slot 0) = 200000000Hz (slot req 200000000Hz, actual 200000000HZ div = 0) [ 1.653085] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.659270] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.664649] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 1.674371] max77686-rtc max77802-rtc: hctosys: unable to read the hardware clock [ 1.696636] Waiting for root device /dev/mmcblk0p1... [ 1.700476] mmc0: tuning execution failed: -5 [ 1.704542] mmc0: error -5 whilst initialising MMC card [ 2.572345] asix 1-1:1.0 eth0: register 'asix' at usb-xhci-hcd.2.auto-1, ASIX AX88772 USB 2.0 Ethernet, c8:b3:73:46:fb:95 [ 2.586323] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 2.591785] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 2.598157] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 2.603541] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo
[PYBOOT] [pi 01:56]: Timed out waiting for "<type 'str'>":
[PYBOOT] [pi 01:57]: got exception: timeout ~$off
[PYBOOT] [pi 01:58]: Done. Board snowball-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.936248] ledtrig-cpu: registered to indicate activity on CPUs [ 1.942687] usbcore: registered new interface driver usbhid [ 1.948303] usbhid: USB HID core driver [ 1.956848] NET: Registered protocol family 10 [ 1.962188] sit: IPv6 over IPv4 tunneling driver [ 1.967407] NET: Registered protocol family 17 [ 1.971893] can: controller area network core (rev 20120528 abi 9) [ 1.978118] NET: Registered protocol family 29 [ 1.982574] can: raw protocol (rev 20120528) [ 1.986877] can: broadcast manager protocol (rev 20120528 t) [ 1.992523] can: netlink gateway (rev 20130117) max_hops=1 [ 1.998535] Key type dns_resolver registered [ 2.002990] ThumbEE CPU extension supported. [ 2.007293] Registering SWP/SWPB emulation handler [ 2.014617] input: gpio_keys as /devices/soc0/gpio_keys/input/input0 [ 2.021392] rtc-pl031 80154000.rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 2.030578] thermal cooling_device0: thermal-cpufreq-0 bind to 0: 0-succeed [ 2.037597] thermal cooling_device0: thermal-cpufreq-0 bind to 1: 0-succeed [ 2.044586] thermal cooling_device0: thermal-cpufreq-0 bind to 2: 0-succeed [ 2.051574] db8500-cpufreq-cooling soc:cpufreq-cooling: Cooling device registered: thermal-cpufreq-0 [ 2.064910] db8500-esram12: disabling [ 2.068664] db8500-esram34: disabling [ 2.072631] V-CSI/DSI: disabling [ 2.075927] mmci-reg: disabling [ 2.079620] uart-pl011 80007000.uart: DMA channel TX dma0chan20 [ 2.085601] uart-pl011 80007000.uart: DMA channel RX dma0chan21 [ 2.091979] Waiting for root device /dev/mmcblk0p4... [ 2.952056] mmc3: new high speed MMC card at address 0001 [ 3.942260] mmcblk3: mmc3:0001 3.53 GiB [ 3.946563] mmcblk3boot0: mmc3:0001 partition 1 2.00 MiB [ 3.952178] mmcblk3boot1: mmc3:0001 partition 2 2.00 MiB [ 3.957763] mmcblk3rpmb: mmc3:0001 partition 3 128 KiB [ 3.964294] mmcblk3: p1 p2 p3 p4
[PYBOOT] [snowball 02:03]: Timed out waiting for "<type 'str'>":
[PYBOOT] [snowball 02:04]: got exception: timeout ~$off
[PYBOOT] [snowball 02:05]: Done. Board snowball-arm-u8500_defconfig failure log: -------------------------------------------------
[ 2.683502] ux500-msp-i2s ux500-msp-i2s.1: Failed to get DMA channel capabilities, falling back to period counting: -6 [ 2.694213] snd-soc-mop500 snd-soc-mop500.0: ab8500-codec-dai.0 <-> ux500-msp-i2s.1 mapping ok [ 2.704132] ux500-msp-i2s ux500-msp-i2s.3: Failed to get DMA channel capabilities, falling back to period counting: -6 [ 2.714843] snd-soc-mop500 snd-soc-mop500.0: ab8500-codec-dai.1 <-> ux500-msp-i2s.3 mapping ok [ 2.737731] NET: Registered protocol family 10 [ 2.743194] sit: IPv6 over IPv4 tunneling driver [ 2.748565] NET: Registered protocol family 17 [ 2.753082] NET: Registered protocol family 35 [ 2.757598] NET: Registered protocol family 37 [ 2.762237] Registering SWP/SWPB emulation handler [ 2.778686] coresight-etm3x 801ae000.ptm: PTM 1.0 initialized [ 2.785858] coresight-etm3x 801af000.ptm: PTM 1.0 initialized [ 2.793365] input: gpio_keys as /devices/soc0/gpio_keys/input/input1 [ 2.800811] ab8500-rtc ab8500-rtc.0: setting system clock to 2000-04-28 22:13:59 UTC (956960039) [ 2.810302] thermal cooling_device0: thermal-cpufreq-0 bind to 0: 0-succeed [ 2.817352] thermal cooling_device0: thermal-cpufreq-0 bind to 1: 0-succeed [ 2.824371] thermal cooling_device0: thermal-cpufreq-0 bind to 2: 0-succeed [ 2.831359] db8500-cpufreq-cooling soc:cpufreq-cooling: Cooling device registered: thermal-cpufreq-0 [ 2.844970] db8500-esram12: disabling [ 2.848724] db8500-esram34: disabling [ 2.852661] V-CSI/DSI: disabling [ 2.855926] mmci-reg: disabling [ 2.859222] ALSA device list: [ 2.862213] #0: MOP500-card [ 2.865539] uart-pl011 80007000.uart: DMA channel TX dma0chan24 [ 2.871520] uart-pl011 80007000.uart: DMA channel RX dma0chan25 [ 2.877716] Waiting for root device /dev/mmcblk0p4... Connected. cu: Got hangup signal cu: waitpid: No child processes
[PYBOOT] [snowball 01:53]: Timed out waiting for "<type 'str'>": Connected.
Disconnected.
[PYBOOT] [snowball 01:54]: got exception: timeout ~$off
[PYBOOT] [snowball 01:55]: Done.