Full logs are available at http://arm-soc.lixom.net/bootlogs/next/next-20160506/
Failed boards:
arndale arm-multi_v7_nosmp_defconfig : FAILED 2:56.04 bbb arm-omap2plus_defconfig : FAILED 1:53.80 bbb arm-multi_v7_defconfig : FAILED 1:58.16 bbb arm-multi_v7_nosmp_defconfig : FAILED 2:02.21 beagleboard-x15 arm-omap2plus_defconfig : FAILED 1:45.68 beagleboard-x15 arm-multi_v7_defconfig : FAILED 1:43.65 beagleboard-x15 arm-multi_lpae_defconfig : FAILED 1:51.11 beagleboard-x15 arm-multi_v7_nosmp_defconfig : FAILED 1:53.33 chitra powerpc-pasemi_defconfig : BUILD FAILED colombus arm-multi_v7_nosmp_defconfig : FAILED 3:19.75 cosmic arm-imx_v6_v7_defconfig : FAILED 2:01.30 cosmic arm-multi_v7_defconfig : FAILED 2:07.99 cosmic arm-multi_v7_nosmp_defconfig : FAILED 2:17.07 dalmore arm-tegra_defconfig : FAILED 1:53.62 dalmore arm-multi_v7_defconfig : FAILED 2:03.78 dalmore arm-multi_lpae_defconfig : FAILED 2:10.22 dalmore arm-multi_v7_nosmp_defconfig : FAILED 1:52.02 minnowmax minnowmax_defconfig : NO BUILD odroidu3 arm-exynos_defconfig : FAILED 1:48.94 omap5uevm arm-omap2plus_defconfig : FAILED 2:05.18 omap5uevm arm-multi_v7_defconfig : FAILED 2:08.10 omap5uevm arm-multi_lpae_defconfig : FAILED 2:19.89 omap5uevm arm-multi_v7_nosmp_defconfig : FAILED 2:03.60 pi arm-multi_v7_defconfig : FAILED 1:51.50 pi arm-multi_lpae_defconfig : FAILED 2:07.84 seaboard arm-tegra_defconfig : FAILED 1:54.49 seaboard arm-multi_v7_defconfig : FAILED 2:06.05 seaboard arm-multi_v7_nosmp_defconfig : FAILED 1:50.64 snow arm-multi_v7_nosmp_defconfig : FAILED 1:47.88 snowball arm-u8500_defconfig : FAILED 2:02.19 snowball arm-multi_v7_defconfig : FAILED 2:10.24 snowball arm-multi_v7_nosmp_defconfig : FAILED 2:01.02
Successful boards:
apc arm-vt8500_v6_v7_defconfig : passed 1:14.46 arndale arm-exynos_defconfig : passed 1:33.85 arndale arm-multi_v7_defconfig : passed 1:27.14 arndale arm-multi_lpae_defconfig : passed 1:35.43 capri arm-bcm_defconfig : passed 0:50.02 capri arm-multi_v7_defconfig : passed 1:02.83 capri arm-multi_v7_nosmp_defconfig : warnings 0:51.71 chitra powerpc-ppc64_defconfig : passed 2:05.56 colibri-vf61 arm-imx_v6_v7_defconfig : passed 1:33.80 colibri-vf61 arm-multi_v7_defconfig : passed 1:23.38 colibri-vf61 arm-multi_v7_nosmp_defconfig : passed 1:19.14 colombus arm-sunxi_defconfig : passed 2:27.17 colombus arm-multi_v7_defconfig : passed 2:41.33 colombus arm-multi_lpae_defconfig : passed 2:28.90 cubie arm-sunxi_defconfig : passed 0:50.15 cubie arm-multi_v7_defconfig : passed 0:50.14 cubie arm-multi_v7_nosmp_defconfig : passed 1:02.66 cubie2 arm-sunxi_defconfig : passed 0:52.95 cubie2 arm-multi_v7_defconfig : passed 0:58.15 cubie2 arm-multi_lpae_defconfig : passed 0:55.19 cubie2 arm-multi_v7_nosmp_defconfig : warnings 1:15.45 cubox arm-multi_v7_defconfig : passed 1:23.42 cubox arm-mvebu_v7_defconfig : passed 1:19.90 cubox arm-multi_v7_nosmp_defconfig : passed 0:58.44 hummingboard arm-imx_v6_v7_defconfig : passed 1:35.86 hummingboard arm-multi_v7_defconfig : passed 1:30.02 hummingboard arm-multi_v7_nosmp_defconfig : warnings 1:12.63 jetsontk1 arm-tegra_defconfig : warnings 0:52.22 jetsontk1 arm-multi_v7_defconfig : warnings 1:00.11 jetsontk1 arm-multi_lpae_defconfig : warnings 0:56.52 jetsontk1 arm-multi_v7_nosmp_defconfig : warnings 1:30.81 pandaes arm-omap2plus_defconfig : warnings 1:39.03 pandaes arm-multi_v7_defconfig : passed 1:48.85 pandaes arm-multi_v7_nosmp_defconfig : warnings 1:42.80 pi arm-exynos_defconfig : passed 2:08.46 pi arm-multi_v7_nosmp_defconfig : warnings 2:04.60 pit arm-exynos_defconfig : passed 2:09.92 pit arm-multi_v7_defconfig : passed 2:17.44 pit arm-multi_lpae_defconfig : passed 2:15.84 pit arm-multi_v7_nosmp_defconfig : warnings 2:11.96 seattle arm64-defconfig : passed 2:19.73 snow arm-exynos_defconfig : passed 2:07.93 snow arm-multi_v7_defconfig : passed 2:06.03 snow arm-multi_lpae_defconfig : passed 1:59.70 trimslice arm-tegra_defconfig : warnings 1:33.21 trimslice arm-multi_v7_defconfig : warnings 1:42.03 trimslice arm-multi_v7_nosmp_defconfig : warnings 1:38.11 wandboard arm-imx_v6_v7_defconfig : passed 1:15.24 wandboard arm-multi_v7_defconfig : passed 1:13.04 wandboard arm-multi_v7_nosmp_defconfig : warnings 1:24.96
Offline boards:
beaver arm-tegra_defconfig : OFFLINE 2:11.85 beaver arm-multi_v7_defconfig : OFFLINE 2:31.87 beaver arm-multi_v7_nosmp_defconfig : OFFLINE 2:12.77 parallella arm-multi_v7_defconfig : OFFLINE 2:27.51 parallella arm-multi_v7_nosmp_defconfig : OFFLINE 2:12.54 rk3288evb arm-multi_v7_defconfig : OFFLINE 0:53.47 rk3288evb arm-multi_lpae_defconfig : OFFLINE 0:49.68 rk3288evb arm-multi_v7_nosmp_defconfig : OFFLINE 0:40.91 sama5 arm-sama5_defconfig : OFFLINE 2:22.83 sama5d3-xplained arm-sama5_defconfig : OFFLINE 2:26.71 socfpga arm-socfpga_defconfig : OFFLINE 2:21.27 socfpga arm-multi_v7_defconfig : OFFLINE 2:39.98 socfpga arm-multi_v7_nosmp_defconfig : OFFLINE 2:15.00
Board legend is available at http://arm-soc.lixom.net/boards.html
Board arndale-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
hdmi-en: disabling ahci 122f0000.sata: couldn't get PHY in node sata: -517 Booting Linux on physical CPU 0x0 Linux version 4.6.0-rc6-next-20160506 (build@brutus) (gcc version 6.1.0 (GCC) ) #1 Thu May 5 22:33:45 PDT 2016 CPU: ARMv7 Processor [410fc0f4] revision 4 (ARMv7), cr=10c53c7d CPU: div instructions available: patching division code [c10b37a8] *pgd=4100041e(bad) CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache Machine model: Insignal Arndale evaluation board based on EXYNOS5250 Modules linked in: cma: Reserved 64 MiB at 0xbc000000 Memory policy: Data cache writeback Samsung CPU ID: 0x43520010 On node 0 totalpages: 520192 free_area_init_node: node 0, pgdat c10fc36c, node_mem_map eeff8000 DMA zone: 1536 pages used for memmap DMA zone: 0 pages reserved DMA zone: 192512 pages, LIFO batch:31 HighMem zone: 327680 pages, LIFO batch:31 ------------[ cut here ]------------ WARNING: CPU: 0 PID: 0 at /home/build/work/batch/arch/arm/kernel/devtree.c:149 arm_dt_init_cpu_maps+0xf8/0x134 DT /cpu 2 nodes greater than max cores 1, capping them Modules linked in: CPU: 0 PID: 0 Comm: swapper Not tainted 4.6.0-rc6-next-20160506 #1 Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) [<c030e73c>] (unwind_backtrace) from [<c030b2dc>] (show_stack+0x10/0x14) [<c030b2dc>] (show_stack) from [<c0336264>] (__warn+0xe4/0xfc) [<c0336264>] (__warn) from [<c03362b4>] (warn_slowpath_fmt+0x38/0x48) [<c03362b4>] (warn_slowpath_fmt) from [<c0f040a8>] (arm_dt_init_cpu_maps+0xf8/0x134) [<c0f040a8>] (arm_dt_init_cpu_maps) from [<c0f03388>] (setup_arch+0x780/0x944) [<c0f03388>] (setup_arch) from [<c0f00940>] (start_kernel+0x68/0x374) [<c0f00940>] (start_kernel) from [<40208078>] (0x40208078) ---[ end trace cb88537fdc8fa200 ]---
[PYBOOT] [arndale 02:53]: Timed out waiting for "<type 'str'>":
[PYBOOT] [arndale 02:54]: got exception: timeout ~$off
[PYBOOT] [arndale 02:55]: Done. Board bbb-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.566741] omap_hsmmc 48060000.mmc: Got CD GPIO [ 1.632066] Synopsys Designware Multimedia Card Interface Driver [ 1.639886] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.649859] ledtrig-cpu: registered to indicate activity on CPUs [ 1.657097] usbcore: registered new interface driver usbhid [ 1.663025] usbhid: USB HID core driver [ 1.675131] NET: Registered protocol family 10 [ 1.681645] sit: IPv6 over IPv4 tunneling driver [ 1.687805] NET: Registered protocol family 17 [ 1.692567] can: controller area network core (rev 20120528 abi 9) [ 1.699201] NET: Registered protocol family 29 [ 1.703907] can: raw protocol (rev 20120528) [ 1.708416] can: broadcast manager protocol (rev 20120528 t) [ 1.714401] can: netlink gateway (rev 20130117) max_hops=1 [ 1.721143] Key type dns_resolver registered [ 1.726018] omap_voltage_late_init: Voltage driver support not added [ 1.732967] ThumbEE CPU extension supported. [ 1.737508] Registering SWP/SWPB emulation handler [ 1.782042] tps65217 0-0024: TPS65217 ID 0xe version 1.2 [ 1.788485] at24 0-0050: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.796226] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 1.804858] at24 2-0054: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.812688] at24 2-0055: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.820457] at24 2-0056: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.828209] at24 2-0057: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.835561] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz [ 1.842602] hctosys: unable to open rtc device (rtc0) [ 1.856124] Waiting for root device /dev/mmcblk0p2... [ 1.861867] mmc1: new high speed MMC card at address 0001 [ 1.868663] mmcblk1: mmc1:0001 MMC02G 1.79 GiB [ 1.873942] mmcblk1boot0: mmc1:0001 MMC02G partition 1 1.00 MiB [ 1.880588] mmcblk1boot1: mmc1:0001 MMC02G partition 2 1.00 MiB [ 1.889207] mmcblk1: p1 p2
[PYBOOT] [bbb 01:55]: Timed out waiting for "<type 'str'>":
[PYBOOT] [bbb 01:56]: got exception: timeout ~$off
[PYBOOT] [bbb 01:57]: Done. Board bbb-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
sdhci: Secure Digital Host Controller Interface driver sdhci: Copyright(c) Pierre Ossman omap_hsmmc 48060000.mmc: Got CD GPIO Synopsys Designware Multimedia Card Interface Driver sdhci-pltfm: SDHCI platform and OF driver helper ledtrig-cpu: registered to indicate activity on CPUs usbcore: registered new interface driver usbhid usbhid: USB HID core driver NET: Registered protocol family 10 sit: IPv6 over IPv4 tunneling driver NET: Registered protocol family 17 can: controller area network core (rev 20120528 abi 9) NET: Registered protocol family 29 can: raw protocol (rev 20120528) can: broadcast manager protocol (rev 20120528 t) can: netlink gateway (rev 20130117) max_hops=1 Key type dns_resolver registered omap_voltage_late_init: Voltage driver support not added ThumbEE CPU extension supported. at24 0-0050: 32768 byte 24c256 EEPROM, writable, 1 bytes/write omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz at24 2-0054: 32768 byte 24c256 EEPROM, writable, 1 bytes/write at24 2-0055: 32768 byte 24c256 EEPROM, writable, 1 bytes/write at24 2-0056: 32768 byte 24c256 EEPROM, writable, 1 bytes/write at24 2-0057: 32768 byte 24c256 EEPROM, writable, 1 bytes/write omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz hctosys: unable to open rtc device (rtc0) Waiting for root device /dev/mmcblk0p2... mmc1: new high speed MMC card at address 0001 mmcblk1: mmc1:0001 MMC02G 1.79 GiB mmcblk1boot0: mmc1:0001 MMC02G partition 1 1.00 MiB mmcblk1boot1: mmc1:0001 MMC02G partition 2 1.00 MiB mmcblk1: p1 p2
[PYBOOT] [bbb 01:59]: Timed out waiting for "<type 'str'>":
[PYBOOT] [bbb 02:00]: got exception: timeout ~$off
[PYBOOT] [bbb 02:01]: Done. Board bbb-arm-omap2plus_defconfig failure log: -------------------------------------------------
[ 2.061535] omap_hsmmc 481d8000.mmc: lookup for GPIO cd failed [ 2.067667] omap_hsmmc 481d8000.mmc: GPIO lookup for consumer wp [ 2.074007] omap_hsmmc 481d8000.mmc: using device tree for GPIO lookup [ 2.080899] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@481d8000[0]' [ 2.090513] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@481d8000[0]' [ 2.100029] omap_hsmmc 481d8000.mmc: using lookup tables for GPIO lookup [ 2.107058] omap_hsmmc 481d8000.mmc: lookup for GPIO wp failed [ 2.150126] ledtrig-cpu: registered to indicate activity on CPUs [ 2.158809] oprofile: using arm/armv7 [ 2.163791] Initializing XFRM netlink socket [ 2.168929] NET: Registered protocol family 10 [ 2.179330] sit: IPv6 over IPv4 tunneling driver [ 2.188333] NET: Registered protocol family 17 [ 2.193267] NET: Registered protocol family 15 [ 2.198491] Key type dns_resolver registered [ 2.203345] omap_voltage_late_init: Voltage driver support not added [ 2.210095] sr_dev_init: No voltage domain specified for smartreflex0. Cannot initialize [ 2.218579] sr_dev_init: No voltage domain specified for smartreflex1. Cannot initialize [ 2.228202] ThumbEE CPU extension supported. [ 2.232842] Registering SWP/SWPB emulation handler [ 2.237872] SmartReflex Class3 initialized [ 2.310172] tps65217 0-0024: TPS65217 ID 0xe version 1.2 [ 2.317481] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 2.326228] mmc1: new high speed MMC card at address 0001 [ 2.341196] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz [ 2.349593] mmcblk1: mmc1:0001 MMC02G 1.79 GiB [ 2.357303] hctosys: unable to open rtc device (rtc0) [ 2.362767] sr_init: No PMIC hook to init smartreflex [ 2.368453] sr_init: platform driver register failed for SR [ 2.407266] mmcblk1boot0: mmc1:0001 MMC02G partition 1 1.00 MiB [ 2.415317] mmcblk1boot1: mmc1:0001 MMC02G partition 2 1.00 MiB [ 2.429943] mmcblk1: p1 p2 [ 2.448052] Waiting for root device /dev/mmcblk0p2...
[PYBOOT] [bbb 01:51]: Timed out waiting for "<type 'str'>":
[PYBOOT] [bbb 01:52]: got exception: timeout ~$off
[PYBOOT] [bbb 01:53]: Done. Board beagleboard-x15-arm-multi_lpae_defconfig failure log: -------------------------------------------------
[ 2.166319] palmas-rtc 48070000.i2c:tps659038@58:tps659038_rtc: rtc core: registered 48070000.i2c:tps659 as rtc1 [ 2.181043] at24 0-0050: 4096 byte 24c32 EEPROM, writable, 1 bytes/write [ 2.188123] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 2.210677] rtc-ds1307 2-006f: SET TIME! [ 2.216415] rtc-ds1307 2-006f: rtc core: registered mcp7941x as rtc0 [ 2.223181] rtc-ds1307 2-006f: 64 bytes nvram [ 2.227800] omap_i2c 48060000.i2c: bus 2 rev0.12 at 400 kHz [ 2.236039] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 2.241831] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 [ 2.250081] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x00010010 [ 2.259257] xhci-hcd xhci-hcd.0.auto: irq 410, io mem 0x48890000 [ 2.266163] hub 1-0:1.0: USB hub found [ 2.270125] hub 1-0:1.0: 1 port detected [ 2.274525] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 2.280295] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 [ 2.288406] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 2.297435] hub 2-0:1.0: USB hub found [ 2.301402] hub 2-0:1.0: 1 port detected [ 2.307458] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 2.371725] rtc-ds1307 2-006f: setting system clock to 2001-01-01 00:00:00 UTC (978307200) [ 2.389445] aic_dvdd_fixed: disabling [ 2.395185] Waiting for root device /dev/mmcblk0p1... [ 2.442240] mmc1: new high speed MMC card at address 0001 [ 2.448297] mmcblk1: mmc1:0001 S10004 3.56 GiB [ 2.453230] mmcblk1boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 2.459597] mmcblk1boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 2.466507] mmcblk1: p1 [ 2.580185] usb 1-1: new high-speed USB device number 2 using xhci-hcd [ 2.736549] hub 1-1:1.0: USB hub found [ 2.740533] hub 1-1:1.0: 4 ports detected [ 2.820253] usb 2-1: new SuperSpeed USB device number 2 using xhci-hcd [ 2.848541] hub 2-1:1.0: USB hub found [ 2.852525] hub 2-1:1.0: 4 ports detected
[PYBOOT] [beagleboard-x15 01:47]: Timed out waiting for "<type 'str'>":
[PYBOOT] [beagleboard-x15 01:48]: got exception: timeout ~$off
[PYBOOT] [beagleboard-x15 01:49]: Done. Board beagleboard-x15-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 2.166277] palmas-rtc 48070000.i2c:tps659038@58:tps659038_rtc: rtc core: registered 48070000.i2c:tps659 as rtc1 [ 2.181011] at24 0-0050: 4096 byte 24c32 EEPROM, writable, 1 bytes/write [ 2.188094] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 2.210649] rtc-ds1307 2-006f: SET TIME! [ 2.216373] rtc-ds1307 2-006f: rtc core: registered mcp7941x as rtc0 [ 2.223130] rtc-ds1307 2-006f: 64 bytes nvram [ 2.227748] omap_i2c 48060000.i2c: bus 2 rev0.12 at 400 kHz [ 2.236002] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 2.241796] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 [ 2.250040] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x00010010 [ 2.259212] xhci-hcd xhci-hcd.0.auto: irq 410, io mem 0x48890000 [ 2.266096] hub 1-0:1.0: USB hub found [ 2.270051] hub 1-0:1.0: 1 port detected [ 2.274459] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 2.280239] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 [ 2.288367] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 2.297400] hub 2-0:1.0: USB hub found [ 2.301371] hub 2-0:1.0: 1 port detected [ 2.307474] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 2.371788] rtc-ds1307 2-006f: setting system clock to 2001-01-01 00:00:00 UTC (978307200) [ 2.389915] aic_dvdd_fixed: disabling [ 2.394610] Waiting for root device /dev/mmcblk0p1... [ 2.422219] mmc1: new high speed MMC card at address 0001 [ 2.428245] mmcblk1: mmc1:0001 S10004 3.56 GiB [ 2.433158] mmcblk1boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 2.439517] mmcblk1boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 2.446457] mmcblk1: p1 [ 2.580157] usb 1-1: new high-speed USB device number 2 using xhci-hcd [ 2.736512] hub 1-1:1.0: USB hub found [ 2.740503] hub 1-1:1.0: 4 ports detected [ 2.820189] usb 2-1: new SuperSpeed USB device number 2 using xhci-hcd [ 2.848506] hub 2-1:1.0: USB hub found [ 2.852491] hub 2-1:1.0: 4 ports detected
[PYBOOT] [beagleboard-x15 01:41]: Timed out waiting for "<type 'str'>":
[PYBOOT] [beagleboard-x15 01:42]: got exception: timeout ~$off
[PYBOOT] [beagleboard-x15 01:43]: Done. Board beagleboard-x15-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
palmas-rtc 48070000.i2c:tps659038@58:tps659038_rtc: rtc core: registered 48070000.i2c:tps659 as rtc1 at24 0-0050: 4096 byte 24c32 EEPROM, writable, 1 bytes/write omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz rtc-ds1307 2-006f: SET TIME! rtc-ds1307 2-006f: rtc core: registered mcp7941x as rtc0 rtc-ds1307 2-006f: 64 bytes nvram omap_i2c 48060000.i2c: bus 2 rev0.12 at 400 kHz xhci-hcd xhci-hcd.0.auto: xHCI Host Controller xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x00010010 xhci-hcd xhci-hcd.0.auto: irq 410, io mem 0x48890000 hub 1-0:1.0: USB hub found hub 1-0:1.0: 1 port detected xhci-hcd xhci-hcd.0.auto: xHCI Host Controller xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. hub 2-0:1.0: USB hub found hub 2-0:1.0: 1 port detected omap_hsmmc 4809c000.mmc: Got CD GPIO rtc-ds1307 2-006f: setting system clock to 2001-01-01 00:00:00 UTC (978307200) aic_dvdd_fixed: disabling Waiting for root device /dev/mmcblk0p1... mmc1: new high speed MMC card at address 0001 mmcblk1: mmc1:0001 S10004 3.56 GiB mmcblk1boot0: mmc1:0001 S10004 partition 1 4.00 MiB mmcblk1boot1: mmc1:0001 S10004 partition 2 4.00 MiB mmcblk1: p1 usb 1-1: new high-speed USB device number 2 using xhci-hcd hub 1-1:1.0: USB hub found hub 1-1:1.0: 4 ports detected usb 2-1: new SuperSpeed USB device number 2 using xhci-hcd hub 2-1:1.0: USB hub found hub 2-1:1.0: 4 ports detected
[PYBOOT] [beagleboard-x15 01:50]: Timed out waiting for "<type 'str'>":
[PYBOOT] [beagleboard-x15 01:51]: got exception: timeout ~$off
[PYBOOT] [beagleboard-x15 01:52]: Done. Board beagleboard-x15-arm-omap2plus_defconfig failure log: -------------------------------------------------
[ 4.200089] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer cd [ 4.206383] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 4.213280] of_get_named_gpiod_flags: parsed 'cd-gpios' property of node '/ocp/mmc@4809c000[0]' - status (0) [ 4.223677] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 4.228543] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer wp [ 4.234837] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 4.241697] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@4809c000[0]' [ 4.251289] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@4809c000[0]' [ 4.260792] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 4.267855] omap_hsmmc 4809c000.mmc: lookup for GPIO wp failed [ 4.317494] omap_hsmmc 480b4000.mmc: GPIO lookup for consumer cd [ 4.323790] omap_hsmmc 480b4000.mmc: using device tree for GPIO lookup [ 4.330667] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/ocp/mmc@480b4000[0]' [ 4.340272] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/ocp/mmc@480b4000[0]' [ 4.349778] omap_hsmmc 480b4000.mmc: using lookup tables for GPIO lookup [ 4.356823] omap_hsmmc 480b4000.mmc: lookup for GPIO cd failed [ 4.362937] omap_hsmmc 480b4000.mmc: GPIO lookup for consumer wp [ 4.369239] omap_hsmmc 480b4000.mmc: using device tree for GPIO lookup [ 4.376083] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@480b4000[0]' [ 4.385677] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@480b4000[0]' [ 4.395173] omap_hsmmc 480b4000.mmc: using lookup tables for GPIO lookup [ 4.402218] omap_hsmmc 480b4000.mmc: lookup for GPIO wp failed [ 4.447659] hctosys: unable to open rtc device (rtc0) [ 4.452955] sr_init: No PMIC hook to init smartreflex [ 4.458468] sr_init: platform driver register failed for SR [ 4.499178] mmc1: new high speed MMC card at address 0001 [ 4.503625] aic_dvdd_fixed: disabling [ 4.508991] ldousb: disabling [ 4.511209] mmcblk1: mmc1:0001 S10004 3.56 GiB [ 4.511924] mmcblk1boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 4.512582] mmcblk1boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 4.531029] mmcblk1: p1 [ 4.538805] Waiting for root device /dev/mmcblk0p1...
[PYBOOT] [beagleboard-x15 01:43]: Timed out waiting for "<type 'str'>":
[PYBOOT] [beagleboard-x15 01:44]: got exception: timeout ~$off
[PYBOOT] [beagleboard-x15 01:45]: Done. Board colombus-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] Synthesizing the initial hotplug events...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Waiting for /dev to be fully populated...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Activating swap...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. EXT4-fs (mmcblk0p1): warning: mounting fs with errors, running e2fsck is recommended EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [....] Cleaning up temporary files... /tmp[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] Activating lvm and md swap...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Checking file systems...fsck from util-linux 2.20.1 [?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Mounting local filesystems...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Activating swapfile swap...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Cleaning up temporary files...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] Setting kernel variables ...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. random: dd urandom read with 57 bits of entropy available [....] Configuring network interfaces...Internet Systems Consortium DHCP Client 4.2.2 Copyright 2004-2011 Internet Systems Consortium. All rights reserved. For info, please visit https://www.isc.org/software/dhcp/
eth0: device MAC address 8a:3f:90:e7:58:3d RX IPC Checksum Offload disabled No MAC Management Counters available IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready Listening on LPF/eth0/8a:3f:90:e7:58:3d Sending on LPF/eth0/8a:3f:90:e7:58:3d Sending on Socket/fallback DHCPREQUEST on eth0 to 255.255.255.255 port 67 DHCPREQUEST on eth0 to 255.255.255.255 port 67 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 7 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 14 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 21 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 14
[PYBOOT] [colombus 03:17]: Timed out waiting for "<type 'str'>":
[PYBOOT] [colombus 03:18]: got exception: timeout ~$off
[PYBOOT] [colombus 03:19]: Done. Board cosmic-arm-imx_v6_v7_defconfig failure log: -------------------------------------------------
[ 14.438108] blk_update_request: I/O error, dev mmcblk0, sector 3633185 [ 18.512344] mmcblk0: error -110 transferring data, sector 3633186, nr 230, cmd response 0x900, card status 0x0 [ 18.522676] blk_update_request: I/O error, dev mmcblk0, sector 3633186 [ 22.596891] mmcblk0: error -110 transferring data, sector 3633187, nr 229, cmd response 0x900, card status 0x0 [ 22.607214] blk_update_request: I/O error, dev mmcblk0, sector 3633187 [ 26.681432] mmcblk0: error -110 transferring data, sector 3633188, nr 228, cmd response 0x900, card status 0x0 [ 26.691760] blk_update_request: I/O error, dev mmcblk0, sector 3633188 [ 30.765972] mmcblk0: error -110 transferring data, sector 3633189, nr 227, cmd response 0x900, card status 0x0 [ 30.776295] blk_update_request: I/O error, dev mmcblk0, sector 3633189 [ 34.850463] mmcblk0: error -110 transferring data, sector 3633190, nr 226, cmd response 0x900, card status 0x0 [ 34.860791] blk_update_request: I/O error, dev mmcblk0, sector 3633190 [ 38.935011] mmcblk0: error -110 transferring data, sector 3633191, nr 225, cmd response 0x900, card status 0x0 [ 38.945336] blk_update_request: I/O error, dev mmcblk0, sector 3633191 [ 43.019523] mmcblk0: error -110 transferring data, sector 3633192, nr 224, cmd response 0x900, card status 0x0 [ 43.029850] blk_update_request: I/O error, dev mmcblk0, sector 3633192 [ 47.104070] mmcblk0: error -110 transferring data, sector 3633193, nr 223, cmd response 0x900, card status 0x0 [ 47.114391] blk_update_request: I/O error, dev mmcblk0, sector 3633193 [ 51.188551] mmcblk0: error -110 transferring data, sector 3633194, nr 222, cmd response 0x900, card status 0x0 [ 51.198868] blk_update_request: I/O error, dev mmcblk0, sector 3633194 [ 55.273076] mmcblk0: error -110 transferring data, sector 3633195, nr 221, cmd response 0x900, card status 0x0 [ 55.283423] blk_update_request: I/O error, dev mmcblk0, sector 3633195 [ 59.357641] mmcblk0: error -110 transferring data, sector 3633196, nr 220, cmd response 0x900, card status 0x0 [ 59.367958] blk_update_request: I/O error, dev mmcblk0, sector 3633196 [ 63.442173] mmcblk0: error -110 transferring data, sector 3633197, nr 219, cmd response 0x900, card status 0x0 [ 63.452493] blk_update_request: I/O error, dev mmcblk0, sector 3633197 [ 67.526694] mmcblk0: error -110 transferring data, sector 3633198, nr 218, cmd response 0x900, card status 0x0 [ 67.537014] blk_update_request: I/O error, dev mmcblk0, sector 3633198 [ 71.611265] mmcblk0: error -110 transferring data, sector 3633199, nr 217, cmd response 0x900, card status 0x0 [ 71.621584] blk_update_request: I/O error, dev mmcblk0, sector 3633199 [ 75.695803] mmcblk0: error -110 transferring data, sector 3633200, nr 216, cmd response 0x900, card status 0x0 [ 75.706129] blk_update_request: I/O error, dev mmcblk0, sector 3633200 [ 79.780289] mmcblk0: error -110 transferring data, sector 3633201, nr 215, cmd response 0x900, card status 0x0 [ 79.790614] blk_update_request: I/O error, dev mmcblk0, sector 3633201
[PYBOOT] [cosmic 01:58]: Timed out waiting for "<type 'str'>":
[PYBOOT] [cosmic 01:59]: got exception: timeout ~$off
[PYBOOT] [cosmic 02:00]: Done. Board cosmic-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 14.058497] blk_update_request: I/O error, dev mmcblk0, sector 3633185 [ 18.132486] mmcblk0: error -110 transferring data, sector 3633186, nr 230, cmd response 0x900, card status 0x0 [ 18.142557] blk_update_request: I/O error, dev mmcblk0, sector 3633186 [ 22.216541] mmcblk0: error -110 transferring data, sector 3633187, nr 229, cmd response 0x900, card status 0x0 [ 22.226618] blk_update_request: I/O error, dev mmcblk0, sector 3633187 [ 26.300601] mmcblk0: error -110 transferring data, sector 3633188, nr 228, cmd response 0x900, card status 0x0 [ 26.310678] blk_update_request: I/O error, dev mmcblk0, sector 3633188 [ 30.384670] mmcblk0: error -110 transferring data, sector 3633189, nr 227, cmd response 0x900, card status 0x0 [ 30.394746] blk_update_request: I/O error, dev mmcblk0, sector 3633189 [ 34.468736] mmcblk0: error -110 transferring data, sector 3633190, nr 226, cmd response 0x900, card status 0x0 [ 34.478815] blk_update_request: I/O error, dev mmcblk0, sector 3633190 [ 38.552804] mmcblk0: error -110 transferring data, sector 3633191, nr 225, cmd response 0x900, card status 0x0 [ 38.562870] blk_update_request: I/O error, dev mmcblk0, sector 3633191 [ 42.636859] mmcblk0: error -110 transferring data, sector 3633192, nr 224, cmd response 0x900, card status 0x0 [ 42.646930] blk_update_request: I/O error, dev mmcblk0, sector 3633192 [ 46.720922] mmcblk0: error -110 transferring data, sector 3633193, nr 223, cmd response 0x900, card status 0x0 [ 46.730989] blk_update_request: I/O error, dev mmcblk0, sector 3633193 [ 50.804979] mmcblk0: error -110 transferring data, sector 3633194, nr 222, cmd response 0x900, card status 0x0 [ 50.815050] blk_update_request: I/O error, dev mmcblk0, sector 3633194 [ 54.889035] mmcblk0: error -110 transferring data, sector 3633195, nr 221, cmd response 0x900, card status 0x0 [ 54.899126] blk_update_request: I/O error, dev mmcblk0, sector 3633195 [ 58.973123] mmcblk0: error -110 transferring data, sector 3633196, nr 220, cmd response 0x900, card status 0x0 [ 58.983195] blk_update_request: I/O error, dev mmcblk0, sector 3633196 [ 63.057182] mmcblk0: error -110 transferring data, sector 3633197, nr 219, cmd response 0x900, card status 0x0 [ 63.067256] blk_update_request: I/O error, dev mmcblk0, sector 3633197 [ 67.141242] mmcblk0: error -110 transferring data, sector 3633198, nr 218, cmd response 0x900, card status 0x0 [ 67.151315] blk_update_request: I/O error, dev mmcblk0, sector 3633198 [ 71.225299] mmcblk0: error -110 transferring data, sector 3633199, nr 217, cmd response 0x900, card status 0x0 [ 71.235376] blk_update_request: I/O error, dev mmcblk0, sector 3633199 [ 75.309428] mmcblk0: error -110 transferring data, sector 3633200, nr 216, cmd response 0x900, card status 0x0 [ 75.319492] blk_update_request: I/O error, dev mmcblk0, sector 3633200 [ 79.393478] mmcblk0: error -110 transferring data, sector 3633201, nr 215, cmd response 0x900, card status 0x0 [ 79.403555] blk_update_request: I/O error, dev mmcblk0, sector 3633201
[PYBOOT] [cosmic 02:05]: Timed out waiting for "<type 'str'>":
[PYBOOT] [cosmic 02:06]: got exception: timeout ~$off
[PYBOOT] [cosmic 02:07]: Done. Board cosmic-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
blk_update_request: I/O error, dev mmcblk0, sector 3633185 mmcblk0: error -110 transferring data, sector 3633186, nr 230, cmd response 0x900, card status 0x0 blk_update_request: I/O error, dev mmcblk0, sector 3633186 mmcblk0: error -110 transferring data, sector 3633187, nr 229, cmd response 0x900, card status 0x0 blk_update_request: I/O error, dev mmcblk0, sector 3633187 mmcblk0: error -110 transferring data, sector 3633188, nr 228, cmd response 0x900, card status 0x0 blk_update_request: I/O error, dev mmcblk0, sector 3633188 mmcblk0: error -110 transferring data, sector 3633189, nr 227, cmd response 0x900, card status 0x0 blk_update_request: I/O error, dev mmcblk0, sector 3633189 mmcblk0: error -110 transferring data, sector 3633190, nr 226, cmd response 0x900, card status 0x0 blk_update_request: I/O error, dev mmcblk0, sector 3633190 mmcblk0: error -110 transferring data, sector 3633191, nr 225, cmd response 0x900, card status 0x0 blk_update_request: I/O error, dev mmcblk0, sector 3633191 mmcblk0: error -110 transferring data, sector 3633192, nr 224, cmd response 0x900, card status 0x0 blk_update_request: I/O error, dev mmcblk0, sector 3633192 mmcblk0: error -110 transferring data, sector 3633193, nr 223, cmd response 0x900, card status 0x0 blk_update_request: I/O error, dev mmcblk0, sector 3633193 mmcblk0: error -110 transferring data, sector 3633194, nr 222, cmd response 0x900, card status 0x0 blk_update_request: I/O error, dev mmcblk0, sector 3633194 mmcblk0: error -110 transferring data, sector 3633195, nr 221, cmd response 0x900, card status 0x0 blk_update_request: I/O error, dev mmcblk0, sector 3633195 mmcblk0: error -110 transferring data, sector 3633196, nr 220, cmd response 0x900, card status 0x0 blk_update_request: I/O error, dev mmcblk0, sector 3633196 mmcblk0: error -110 transferring data, sector 3633197, nr 219, cmd response 0x900, card status 0x0 blk_update_request: I/O error, dev mmcblk0, sector 3633197 mmcblk0: error -110 transferring data, sector 3633198, nr 218, cmd response 0x900, card status 0x0 blk_update_request: I/O error, dev mmcblk0, sector 3633198 mmcblk0: error -110 transferring data, sector 3633199, nr 217, cmd response 0x900, card status 0x0 blk_update_request: I/O error, dev mmcblk0, sector 3633199 mmcblk0: error -110 transferring data, sector 3633200, nr 216, cmd response 0x900, card status 0x0 blk_update_request: I/O error, dev mmcblk0, sector 3633200 mmcblk0: error -110 transferring data, sector 3633201, nr 215, cmd response 0x900, card status 0x0 blk_update_request: I/O error, dev mmcblk0, sector 3633201
[PYBOOT] [cosmic 02:14]: Timed out waiting for "<type 'str'>":
[PYBOOT] [cosmic 02:15]: got exception: timeout ~$off
[PYBOOT] [cosmic 02:16]: Done. Board dalmore-arm-multi_lpae_defconfig failure log: -------------------------------------------------
[ 2.778647] can: netlink gateway (rev 20130117) max_hops=1 [ 2.785608] Key type dns_resolver registered [ 2.792037] ThumbEE CPU extension supported. [ 2.796423] Registering SWP/SWPB emulation handler [ 2.827604] usb1_vbus: supplied by vdd-sys-5v0 [ 2.842391] usb2_vbus: supplied by vdd-sys-5v0 [ 2.856076] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 2.878594] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.885476] [drm] No driver support for vblank timestamp query. [ 2.899108] mmc1: new high speed MMC card at address 0001 [ 2.908142] mmcblk1: mmc1:0001 SEM32G 29.1 GiB [ 2.915011] mmcblk1boot0: mmc1:0001 SEM32G partition 1 4.00 MiB [ 2.923194] mmcblk1boot1: mmc1:0001 SEM32G partition 2 4.00 MiB [ 2.931379] mmcblk1rpmb: mmc1:0001 SEM32G partition 3 4.00 MiB [ 2.940185] mmcblk1: p1 [ 3.063672] Console: switching to colour frame buffer device 240x75 [ 3.153475] drm drm: fb0: frame buffer device [ 3.171296] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.186395] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.191985] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 3.200822] tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 [ 3.216185] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 3.226575] hub 1-0:1.0: USB hub found [ 3.230616] hub 1-0:1.0: 1 port detected [ 3.240697] input: gpio-keys as /devices/soc0/gpio-keys/input/input0 [ 3.254429] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 3.316914] dvdd_ts: disabling [ 3.320016] usb1_vbus: disabling [ 3.323389] vdd_cam_1v8_reg: disabling [ 3.330717] Waiting for root device /dev/mmcblk0p1... [ 3.541329] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 4.503250] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f [ 55.761278] random: nonblocking pool is initialized
[PYBOOT] [dalmore 02:06]: Timed out waiting for "<type 'str'>":
[PYBOOT] [dalmore 02:07]: got exception: timeout ~$off
[PYBOOT] [dalmore 02:09]: Done. Board dalmore-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 2.798323] can: netlink gateway (rev 20130117) max_hops=1 [ 2.805372] Key type dns_resolver registered [ 2.811808] ThumbEE CPU extension supported. [ 2.816196] Registering SWP/SWPB emulation handler [ 2.832637] usb1_vbus: supplied by vdd-sys-5v0 [ 2.843754] usb2_vbus: supplied by vdd-sys-5v0 [ 2.862343] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 2.883825] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.890585] [drm] No driver support for vblank timestamp query. [ 2.911862] mmc1: new high speed MMC card at address 0001 [ 2.920829] mmcblk1: mmc1:0001 SEM32G 29.1 GiB [ 2.928115] mmcblk1boot0: mmc1:0001 SEM32G partition 1 4.00 MiB [ 2.935170] mmcblk1boot1: mmc1:0001 SEM32G partition 2 4.00 MiB [ 2.945091] mmcblk1rpmb: mmc1:0001 SEM32G partition 3 4.00 MiB [ 2.955064] mmcblk1: p1 [ 3.068387] Console: switching to colour frame buffer device 240x75 [ 3.157207] drm drm: fb0: frame buffer device [ 3.175954] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.190956] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.196545] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 3.205371] tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 [ 3.221020] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 3.230262] hub 1-0:1.0: USB hub found [ 3.234299] hub 1-0:1.0: 1 port detected [ 3.245012] input: gpio-keys as /devices/soc0/gpio-keys/input/input0 [ 3.259945] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 3.322436] dvdd_ts: disabling [ 3.325540] usb1_vbus: disabling [ 3.328914] vdd_cam_1v8_reg: disabling [ 3.336339] Waiting for root device /dev/mmcblk0p1... [ 3.546040] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 4.523833] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f [ 49.645984] random: nonblocking pool is initialized
[PYBOOT] [dalmore 02:01]: Timed out waiting for "<type 'str'>":
[PYBOOT] [dalmore 02:02]: got exception: timeout ~$off
[PYBOOT] [dalmore 02:03]: Done. Board dalmore-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
can: raw protocol (rev 20120528) can: broadcast manager protocol (rev 20120528 t) can: netlink gateway (rev 20130117) max_hops=1 Key type dns_resolver registered ThumbEE CPU extension supported. usb1_vbus: supplied by vdd-sys-5v0 usb2_vbus: supplied by vdd-sys-5v0 VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [drm] No driver support for vblank timestamp query. Console: switching to colour frame buffer device 240x75 drm drm: fb0: frame buffer device [drm] Initialized tegra 0.0.0 20120330 on minor 0 tegra-ehci 7d008000.usb: EHCI Host Controller tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 mmc1: new high speed MMC card at address 0001 tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 mmcblk1: mmc1:0001 SEM32G 29.1 GiB mmcblk1boot0: mmc1:0001 SEM32G partition 1 4.00 MiB tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 hub 1-0:1.0: USB hub found mmcblk1boot1: mmc1:0001 SEM32G partition 2 4.00 MiB hub 1-0:1.0: 1 port detected mmcblk1rpmb: mmc1:0001 SEM32G partition 3 4.00 MiB input: gpio-keys as /devices/soc0/gpio-keys/input/input0 mmcblk1: p1 palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) dvdd_ts: disabling usb1_vbus: disabling vdd_cam_1v8_reg: disabling Waiting for root device /dev/mmcblk0p1... usb 1-1: new high-speed USB device number 2 using tegra-ehci asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f
[PYBOOT] [dalmore 01:49]: Timed out waiting for "<type 'str'>":
[PYBOOT] [dalmore 01:50]: got exception: timeout ~$off
[PYBOOT] [dalmore 01:51]: Done. Board dalmore-arm-tegra_defconfig failure log: -------------------------------------------------
[ 5.451715] Bluetooth: RFCOMM socket layer initialized [ 5.456937] Bluetooth: RFCOMM ver 1.11 [ 5.460782] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 5.466268] Bluetooth: BNEP socket layer initialized [ 5.471339] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 5.477341] Bluetooth: HIDP socket layer initialized [ 5.483630] Key type dns_resolver registered [ 5.493075] Registering SWP/SWPB emulation handler [ 5.509488] usb1_vbus: supplied by vdd-sys-5v0 [ 5.519537] usb2_vbus: supplied by vdd-sys-5v0 [ 5.533348] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 5.559036] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 5.565825] [drm] No driver support for vblank timestamp query. [ 5.743940] Console: switching to colour frame buffer device 240x75 [ 5.833273] drm drm: fb0: frame buffer device [ 5.861387] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 5.870566] tegra-ehci 7d008000.usb: EHCI Host Controller [ 5.876430] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 5.885638] tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 [ 5.911444] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 5.925327] hub 1-0:1.0: USB hub found [ 5.929351] hub 1-0:1.0: 1 port detected [ 5.942920] input: gpio-keys as /devices/soc0/gpio-keys/input/input1 [ 5.958163] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:01 UTC (946684801) [ 6.047405] dvdd_ts: disabling [ 6.050520] usb1_vbus: disabling [ 6.053938] vdd_cam_1v8_reg: disabling [ 6.058515] ALSA device list: [ 6.061581] #0: NVIDIA Tegra Dalmore [ 6.067392] Waiting for root device /dev/mmcblk0p1... [ 6.251379] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 7.275805] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f [ 63.391359] random: nonblocking pool is initialized
[PYBOOT] [dalmore 01:51]: Timed out waiting for "<type 'str'>":
[PYBOOT] [dalmore 01:52]: got exception: timeout ~$off
[PYBOOT] [dalmore 01:53]: Done. Board odroidu3-arm-exynos_defconfig failure log: -------------------------------------------------
[ 1.705904] NET: Registered protocol family 10 [ 1.706510] sit: IPv6 over IPv4 tunneling driver [ 1.711552] NET: Registered protocol family 17 [ 1.714830] NET: Registered protocol family 15 [ 1.719308] Key type dns_resolver registered [ 1.723631] Registering SWP/SWPB emulation handler [ 1.731551] [drm] Exynos DRM: using 12c10000.mixer device for DMA mapping operations [ 1.736191] exynos-drm exynos-drm: bound 12c10000.mixer (ops mixer_component_ops) [ 1.743602] exynos-drm exynos-drm: bound 12d00000.hdmi (ops hdmi_component_ops) [ 1.750753] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.757335] [drm] No driver support for vblank timestamp query. [ 1.763250] [drm] Initialized exynos 1.0.0 20110530 on minor 0 [ 1.769602] s3c-rtc 10070000.rtc: rtc disabled, re-enabling [ 1.774800] s3c-rtc 10070000.rtc: rtc core: registered s3c as rtc1 [ 1.782032] mmc_host mmc1: Bus speed (slot 0) = 44000000Hz (slot req 52000000Hz, actual 44000000HZ div = 0) [ 1.790870] mmc_host mmc1: Bus speed (slot 0) = 73333333Hz (slot req 52000000Hz, actual 36666666HZ div = 1) [ 1.800572] mmc1: new DDR MMC card at address 0001 [ 1.805683] mmcblk1: mmc1:0001 008G92 7.28 GiB [ 1.807025] max98090 1-0010: MAX98090 REVID=0x43 [ 1.809323] max98090 1-0010: use default 2.8v micbias [ 1.819554] mmcblk1boot0: mmc1:0001 008G92 partition 1 4.00 MiB [ 1.825374] mmcblk1boot1: mmc1:0001 008G92 partition 2 4.00 MiB [ 1.831324] asoc-simple-card sound: HiFi <-> 3830000.i2s mapping ok [ 1.831429] mmcblk1rpmb: mmc1:0001 008G92 partition 3 512 KiB [ 1.842974] mmcblk1: p1 p2 [ 1.847921] input: gpio_keys as /devices/platform/gpio_keys/input/input0 [ 1.886058] max77686-rtc max77686-rtc: setting system clock to 2000-01-01 01:00:19 UTC (946688419) [ 1.908096] VDD10_HDMI_1.0V: disabling [ 1.908822] vdd_g3d: disabling [ 1.909887] BUCK8_2.8V: disabling [ 1.913965] ALSA device list: [ 1.915490] #0: Odroid-U3 [ 1.919395] Waiting for root device /dev/mmcblk0p2...
[PYBOOT] [odroidu3 01:46]: Timed out waiting for "<type 'str'>":
[PYBOOT] [odroidu3 01:47]: got exception: timeout ~$off
[PYBOOT] [odroidu3 01:48]: Done. Board omap5uevm-arm-multi_lpae_defconfig failure log: -------------------------------------------------
[ 1.933998] mmcblk0: mmc0:0001 SEM04G 3.69 GiB [ 1.938901] mmcblk0boot0: mmc0:0001 SEM04G partition 1 2.00 MiB [ 1.945236] mmcblk0boot1: mmc0:0001 SEM04G partition 2 2.00 MiB [ 1.953128] smps6: Bringing 1350000uV into 1200000-1200000uV [ 1.963306] smps9: Bringing 0uV into 2100000-2100000uV [ 1.971519] ldo1: Bringing 0uV into 1800000-1800000uV [ 1.978063] ldo2: Bringing 0uV into 2800000-2800000uV [ 1.986103] ldo4: Bringing 0uV into 1800000-1800000uV [ 1.997188] ldo7: Bringing 0uV into 2000000-2000000uV [ 2.004885] smsc95xx v1.0.4 [ 2.008194] ldo9: bypassed regulator has no supply! [ 2.013318] ldo9: failed to get the current voltage(-517) [ 2.018980] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 2.034307] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 2.057023] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 2.060781] smsc95xx 1-3:1.0 eth0: register 'smsc95xx' at usb-4a064c00.ehci-3, smsc95xx USB 2.0 Ethernet, a2:ff:1e:1a:e8:59 [ 2.075119] omap-dwc3 4a020000.omap_dwc3: vbus init failed [ 2.104956] smps9: Bringing 0uV into 2100000-2100000uV [ 2.123739] ldo9: bypassed regulator has no supply! [ 2.128857] ldo9: failed to get the current voltage(-517) [ 2.134523] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 2.149089] palmas-rtc 48070000.i2c:palmas@48:rtc: setting system clock to 2000-01-01 02:25:22 UTC (946693522) [ 2.164805] pbias_mmc_omap5: disabling [ 2.168749] vmmcsdio_fixed: disabling [ 2.173301] Waiting for root device /dev/mmcblk1p2... [ 2.286247] usb 1-2: new high-speed USB device number 3 using ehci-omap [ 2.422068] hub 1-2:1.0: USB hub found [ 2.426077] hub 1-2:1.0: 3 ports detected [ 2.431946] omap-dwc3 4a020000.omap_dwc3: vbus init failed [ 2.460038] smps9: Bringing 0uV into 2100000-2100000uV [ 2.478757] ldo9: bypassed regulator has no supply! [ 2.483878] ldo9: failed to get the current voltage(-517) [ 2.489542] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator
[PYBOOT] [omap5uevm 02:17]: Timed out waiting for "<type 'str'>":
[PYBOOT] [omap5uevm 02:18]: got exception: timeout ~$off
[PYBOOT] [omap5uevm 02:19]: Done. Board omap5uevm-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.978325] ldo1: Bringing 0uV into 1800000-1800000uV [ 1.984845] ldo2: Bringing 0uV into 2800000-2800000uV [ 1.992865] ldo4: Bringing 0uV into 1800000-1800000uV [ 2.003959] ldo7: Bringing 0uV into 2000000-2000000uV [ 2.012121] ldo9: bypassed regulator has no supply! [ 2.017243] ldo9: failed to get the current voltage(-517) [ 2.022909] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 2.037094] smsc95xx v1.0.4 [ 2.041214] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 2.064418] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 2.070827] omap-dwc3 4a020000.omap_dwc3: vbus init failed [ 2.088203] smsc95xx 1-3:1.0 eth0: register 'smsc95xx' at usb-4a064c00.ehci-3, smsc95xx USB 2.0 Ethernet, 0e:05:ae:85:2f:42 [ 2.107113] smps9: Bringing 0uV into 2100000-2100000uV [ 2.125770] ldo9: bypassed regulator has no supply! [ 2.130889] ldo9: failed to get the current voltage(-517) [ 2.136553] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 2.150611] omap-dwc3 4a020000.omap_dwc3: vbus init failed [ 2.182253] smps9: Bringing 0uV into 2100000-2100000uV [ 2.201019] ldo9: bypassed regulator has no supply! [ 2.206141] ldo9: failed to get the current voltage(-517) [ 2.211807] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 2.226268] palmas-rtc 48070000.i2c:palmas@48:rtc: setting system clock to 2000-01-01 02:22:49 UTC (946693369) [ 2.241966] pbias_mmc_omap5: disabling [ 2.245921] vmmcsdio_fixed: disabling [ 2.250488] Waiting for root device /dev/mmcblk1p2... [ 2.328658] usb 1-2: new high-speed USB device number 3 using ehci-omap [ 2.464511] hub 1-2:1.0: USB hub found [ 2.468525] hub 1-2:1.0: 3 ports detected [ 2.474382] omap-dwc3 4a020000.omap_dwc3: vbus init failed [ 2.502388] smps9: Bringing 0uV into 2100000-2100000uV [ 2.521132] ldo9: bypassed regulator has no supply! [ 2.526256] ldo9: failed to get the current voltage(-517) [ 2.531918] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator
[PYBOOT] [omap5uevm 02:04]: Timed out waiting for "<type 'str'>":
[PYBOOT] [omap5uevm 02:05]: got exception: timeout ~$off
[PYBOOT] [omap5uevm 02:06]: Done. Board omap5uevm-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
ldo1: Bringing 0uV into 1800000-1800000uV ldo2: Bringing 0uV into 2800000-2800000uV ldo4: Bringing 0uV into 1800000-1800000uV ldo7: Bringing 0uV into 2000000-2000000uV ldo9: bypassed regulator has no supply! ldo9: failed to get the current voltage(-517) palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz smsc95xx v1.0.4 omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz omap-dwc3 4a020000.omap_dwc3: vbus init failed smps9: Bringing 0uV into 2100000-2100000uV ldo9: bypassed regulator has no supply! ldo9: failed to get the current voltage(-517) palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator palmas-rtc 48070000.i2c:palmas@48:rtc: setting system clock to 2000-01-01 02:27:37 UTC (946693657) pbias_mmc_omap5: disabling vmmcsdio_fixed: disabling smsc95xx 1-3:1.0 eth0: register 'smsc95xx' at usb-4a064c00.ehci-3, smsc95xx USB 2.0 Ethernet, 72:f4:4b:7b:41:49 omap-dwc3 4a020000.omap_dwc3: vbus init failed smps9: Bringing 0uV into 2100000-2100000uV ldo9: bypassed regulator has no supply! ldo9: failed to get the current voltage(-517) palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator Waiting for root device /dev/mmcblk1p2... usb 1-2: new high-speed USB device number 3 using ehci-omap hub 1-2:1.0: USB hub found hub 1-2:1.0: 3 ports detected omap-dwc3 4a020000.omap_dwc3: vbus init failed smps9: Bringing 0uV into 2100000-2100000uV ldo9: bypassed regulator has no supply! ldo9: failed to get the current voltage(-517) palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator
[PYBOOT] [omap5uevm 02:01]: Timed out waiting for "<type 'str'>":
[PYBOOT] [omap5uevm 02:02]: got exception: timeout ~$off
[PYBOOT] [omap5uevm 02:03]: Done. Board omap5uevm-arm-omap2plus_defconfig failure log: -------------------------------------------------
[ 4.038334] ldo9: bypassed regulator has no supply! [ 4.043471] ldo9: failed to get the current voltage(-517) [ 4.049138] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 4.072059] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 4.079632] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 4.086188] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer cd [ 4.092508] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 4.099373] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/ocp/mmc@4809c000[0]' [ 4.108947] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/ocp/mmc@4809c000[0]' [ 4.118453] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 4.125510] omap_hsmmc 4809c000.mmc: lookup for GPIO cd failed [ 4.131645] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer wp [ 4.137941] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 4.144801] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@4809c000[0]' [ 4.154395] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@4809c000[0]' [ 4.163897] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 4.170945] omap_hsmmc 4809c000.mmc: lookup for GPIO wp failed [ 4.210047] omap_hsmmc 480ad000.mmc: GPIO lookup for consumer wp [ 4.216349] omap_hsmmc 480ad000.mmc: using device tree for GPIO lookup [ 4.223217] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@480ad000[0]' [ 4.232810] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@480ad000[0]' [ 4.242302] omap_hsmmc 480ad000.mmc: using lookup tables for GPIO lookup [ 4.249346] omap_hsmmc 480ad000.mmc: lookup for GPIO wp failed [ 4.270100] smps9: Bringing 0uV into 2100000-2100000uV [ 4.298860] ldo9: bypassed regulator has no supply! [ 4.303995] ldo9: failed to get the current voltage(-517) [ 4.309675] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 4.329813] hctosys: unable to open rtc device (rtc0) [ 4.335109] sr_init: No PMIC hook to init smartreflex [ 4.340615] sr_init: platform driver register failed for SR [ 4.368193] pbias_mmc_omap5: disabling [ 4.372158] vmmcsdio_fixed: disabling [ 4.378269] Waiting for root device /dev/mmcblk1p2...
[PYBOOT] [omap5uevm 02:02]: Timed out waiting for "<type 'str'>":
[PYBOOT] [omap5uevm 02:03]: got exception: timeout ~$off
[PYBOOT] [omap5uevm 02:04]: Done. Board pi-arm-multi_lpae_defconfig failure log: -------------------------------------------------
[ 1.533295] isl29018 7-0044: No cache defaults, reading back from HW [ 1.539649] isl29018 7-0044: Failed to read 1: -6 [ 1.544233] isl29018 7-0044: regmap initialization fails: -6 [ 1.555125] NET: Registered protocol family 10 [ 1.559557] sit: IPv6 over IPv4 tunneling driver [ 1.563135] NET: Registered protocol family 17 [ 1.567140] can: controller area network core (rev 20120528 abi 9) [ 1.573329] NET: Registered protocol family 29 [ 1.577718] can: raw protocol (rev 20120528) [ 1.581968] can: broadcast manager protocol (rev 20120528 t) [ 1.587609] can: netlink gateway (rev 20130117) max_hops=1 [ 1.593335] Key type dns_resolver registered [ 1.597662] ThumbEE CPU extension supported. [ 1.601578] Registering SWP/SWPB emulation handler [ 1.611458] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.616937] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.623307] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.628681] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 1.638773] input: gpio-keys as /devices/platform/gpio-keys/input/input1 [ 1.649112] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.654552] mmc_host mmc0: Bus speed (slot 0) = 200000000Hz (slot req 200000000Hz, actual 200000000HZ div = 0) [ 1.664741] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.670921] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.676300] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 1.686020] max77686-rtc max77802-rtc: hctosys: unable to read the hardware clock [ 1.708256] Waiting for root device /dev/mmcblk0p1... [ 1.712133] mmc0: tuning execution failed: -5 [ 1.716193] mmc0: error -5 whilst initialising MMC card [ 2.583080] asix 1-1:1.0 eth0: register 'asix' at usb-xhci-hcd.2.auto-1, ASIX AX88772 USB 2.0 Ethernet, c8:b3:73:46:fb:95 [ 2.597209] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 2.602670] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 2.609041] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 2.614425] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo
[PYBOOT] [pi 02:05]: Timed out waiting for "<type 'str'>":
[PYBOOT] [pi 02:06]: got exception: timeout ~$off
[PYBOOT] [pi 02:07]: Done. Board pi-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.538923] isl29018 7-0044: No cache defaults, reading back from HW [ 1.545277] isl29018 7-0044: Failed to read 1: -6 [ 1.549862] isl29018 7-0044: regmap initialization fails: -6 [ 1.560791] NET: Registered protocol family 10 [ 1.565225] sit: IPv6 over IPv4 tunneling driver [ 1.568809] NET: Registered protocol family 17 [ 1.572812] can: controller area network core (rev 20120528 abi 9) [ 1.579001] NET: Registered protocol family 29 [ 1.583389] can: raw protocol (rev 20120528) [ 1.587640] can: broadcast manager protocol (rev 20120528 t) [ 1.593281] can: netlink gateway (rev 20130117) max_hops=1 [ 1.599012] Key type dns_resolver registered [ 1.603332] ThumbEE CPU extension supported. [ 1.607250] Registering SWP/SWPB emulation handler [ 1.617179] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.622655] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.629022] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.634397] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 1.644499] input: gpio-keys as /devices/platform/gpio-keys/input/input1 [ 1.654842] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.660285] mmc_host mmc0: Bus speed (slot 0) = 200000000Hz (slot req 200000000Hz, actual 200000000HZ div = 0) [ 1.670475] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.676654] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.682033] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 1.691761] max77686-rtc max77802-rtc: hctosys: unable to read the hardware clock [ 1.714115] Waiting for root device /dev/mmcblk0p1... [ 1.717999] mmc0: tuning execution failed: -5 [ 1.722056] mmc0: error -5 whilst initialising MMC card [ 2.583716] asix 1-1:1.0 eth0: register 'asix' at usb-xhci-hcd.2.auto-1, ASIX AX88772 USB 2.0 Ethernet, c8:b3:73:46:fb:95 [ 2.597864] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 2.603328] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 2.609700] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 2.615084] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo
[PYBOOT] [pi 01:48]: Timed out waiting for "<type 'str'>":
[PYBOOT] [pi 01:49]: got exception: timeout ~$off
[PYBOOT] [pi 01:50]: Done. Board seaboard-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.906567] tegra-dc 54200000.dc: failed to probe RGB output: -517 [ 1.917903] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 1.924385] tegra-ehci c5000000.usb: EHCI Host Controller [ 1.929822] tegra-ehci c5000000.usb: new USB bus registered, assigned bus number 3 [ 1.938272] tegra-ehci c5000000.usb: irq 287, io mem 0xc5000000 [ 1.951679] tegra-ehci c5000000.usb: USB 2.0 started, EHCI 1.00 [ 1.958335] hub 3-0:1.0: USB hub found [ 1.962141] hub 3-0:1.0: 1 port detected [ 1.970402] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.977061] [drm] No driver support for vblank timestamp query. [ 1.995719] mmc2: switch to bus width 8 failed [ 2.000535] mmc2: switch to bus width 4 failed [ 2.005060] mmc2: new high speed MMC card at address 0001 [ 2.011551] mmcblk2: mmc2:0001 MMC08G 7.46 GiB [ 2.016533] mmcblk2boot0: mmc2:0001 MMC08G partition 1 512 KiB [ 2.022575] mmcblk2boot1: mmc2:0001 MMC08G partition 2 512 KiB [ 2.023839] mmcblk2: p3 [ 2.028066] mmc0: queuing unknown CIS tuple 0x80 (50 bytes) [ 2.035770] mmc0: queuing unknown CIS tuple 0x80 (7 bytes) [ 2.038592] mmc0: queuing unknown CIS tuple 0x80 (7 bytes) [ 2.045787] mmc0: queuing unknown CIS tuple 0x80 (19 bytes) [ 2.062969] Console: switching to colour frame buffer device 170x48 [ 2.064483] mmc0: queuing unknown CIS tuple 0x02 (1 bytes) [ 2.068807] mmc0: new SDIO card at address 0001 [ 2.125126] drm drm: fb0: frame buffer device [ 2.141674] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 2.148271] input: gpio-keys as /devices/soc0/gpio-keys/input/input2 [ 2.155242] tps6586x-rtc tps6586x-rtc: setting system clock to 2009-01-01 00:00:00 UTC (1230768000) [ 2.168597] vdd_1v5: disabling [ 2.171673] vdd_1v2: disabling [ 2.781017] asix 2-1:1.0 eth0: register 'asix' at usb-c5008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, c0:c1:c0:13:08:60 [ 2.792405] Waiting for root device /dev/mmcblk0p3... [ 57.988046] random: nonblocking pool is initialized
[PYBOOT] [seaboard 02:03]: Timed out waiting for "<type 'str'>":
[PYBOOT] [seaboard 02:04]: got exception: timeout ~$off
[PYBOOT] [seaboard 02:05]: Done. Board seaboard-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
VDDIO_HDMI: supplied by vdd_5v0 tegra-dc 54200000.dc: failed to probe RGB output: -517 utmi_phy_clk_enable: timeout waiting for phy to stabilize tegra-ehci c5000000.usb: EHCI Host Controller tegra-ehci c5000000.usb: new USB bus registered, assigned bus number 3 tegra-ehci c5000000.usb: irq 287, io mem 0xc5000000 mmc2: switch to bus width 8 failed mmc2: switch to bus width 4 failed mmc2: new high speed MMC card at address 0001 mmcblk2: mmc2:0001 MMC08G 7.46 GiB mmcblk2boot0: mmc2:0001 MMC08G partition 1 512 KiB mmcblk2boot1: mmc2:0001 MMC08G partition 2 512 KiB mmcblk2: p3 tegra-ehci c5000000.usb: USB 2.0 started, EHCI 1.00 hub 3-0:1.0: USB hub found hub 3-0:1.0: 1 port detected [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [drm] No driver support for vblank timestamp query. mmc0: queuing unknown CIS tuple 0x80 (50 bytes) mmc0: queuing unknown CIS tuple 0x80 (7 bytes) mmc0: queuing unknown CIS tuple 0x80 (7 bytes) mmc0: queuing unknown CIS tuple 0x80 (19 bytes) Console: switching to colour frame buffer device 170x48 drm drm: fb0: frame buffer device [drm] Initialized tegra 0.0.0 20120330 on minor 0 input: gpio-keys as /devices/soc0/gpio-keys/input/input2 tps6586x-rtc tps6586x-rtc: setting system clock to 2009-01-01 00:00:00 UTC (1230768000) vdd_1v5: disabling vdd_1v2: disabling mmc0: queuing unknown CIS tuple 0x02 (1 bytes) mmc0: new SDIO card at address 0001 asix 2-1:1.0 eth0: register 'asix' at usb-c5008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, c0:c1:c0:13:08:60 Waiting for root device /dev/mmcblk0p3...
[PYBOOT] [seaboard 01:48]: Timed out waiting for "<type 'str'>":
[PYBOOT] [seaboard 01:49]: got exception: timeout ~$off
[PYBOOT] [seaboard 01:50]: Done. Board seaboard-arm-tegra_defconfig failure log: -------------------------------------------------
[ 4.410061] can: raw protocol (rev 20120528) [ 4.414328] can: broadcast manager protocol (rev 20120528 t) [ 4.420046] can: netlink gateway (rev 20130117) max_hops=1 [ 4.455542] Bluetooth: RFCOMM socket layer initialized [ 4.460708] Bluetooth: RFCOMM ver 1.11 [ 4.464474] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 4.469851] Bluetooth: BNEP socket layer initialized [ 4.474813] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.480833] Bluetooth: HIDP socket layer initialized [ 4.486519] Key type dns_resolver registered [ 4.492259] Registering SWP/SWPB emulation handler [ 4.507913] VDDIO_HDMI: supplied by vdd_5v0 [ 4.514804] tegra-dc 54200000.dc: failed to probe RGB output: -517 [ 4.526782] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 4.533258] tegra-ehci c5000000.usb: EHCI Host Controller [ 4.538762] tegra-ehci c5000000.usb: new USB bus registered, assigned bus number 3 [ 4.546976] tegra-ehci c5000000.usb: irq 287, io mem 0xc5000000 [ 4.565268] tegra-ehci c5000000.usb: USB 2.0 started, EHCI 1.00 [ 4.574956] hub 3-0:1.0: USB hub found [ 4.578848] hub 3-0:1.0: 1 port detected [ 4.593340] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 4.600028] [drm] No driver support for vblank timestamp query. [ 4.723628] asix 2-1:1.0 eth0: register 'asix' at usb-c5008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, c0:c1:c0:13:08:60 [ 4.741848] Console: switching to colour frame buffer device 170x48 [ 4.781943] drm drm: fb0: frame buffer device [ 4.815253] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 4.822414] input: gpio-keys as /devices/soc0/gpio-keys/input/input4 [ 4.830038] tps6586x-rtc tps6586x-rtc: setting system clock to 2009-01-01 00:00:01 UTC (1230768001) [ 4.849016] vdd_1v5: disabling [ 4.852069] vdd_1v2: disabling [ 4.855278] ALSA device list: [ 4.858252] #0: NVIDIA Tegra Seaboard [ 4.862751] Waiting for root device /dev/mmcblk0p3...
[PYBOOT] [seaboard 01:51]: Timed out waiting for "<type 'str'>":
[PYBOOT] [seaboard 01:52]: got exception: timeout ~$off
[PYBOOT] [seaboard 01:54]: Done. Board snow-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
[....] Checking file systems...fsck from util-linux 2.20.1 [?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Mounting local filesystems...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Activating swapfile swap...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Cleaning up temporary files...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] Setting kernel variables ...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. random: dd urandom read with 57 bits of entropy available [....] Configuring network interfaces...Internet Systems Consortium DHCP Client 4.2.2 Copyright 2004-2011 Internet Systems Consortium. All rights reserved. For info, please visit https://www.isc.org/software/dhcp/
Cannot find device "eth0" Bind socket to interface: No such device Failed to bring up eth0. [?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Cleaning up temporary files...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. INIT: Entering runlevel: 2 [[36minfo[39;49m] Using makefile-style concurrent boot in runlevel 2. [....] Starting enhanced syslogd: rsyslogd[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] Starting web server: apache2apache2: Could not reliably determine the server's fully qualified domain name, using 127.0.0.1 for ServerName [?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] Starting periodic command scheduler: cron[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] Starting system message bus: dbus[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] Loading cpufreq kernel modules...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone (none). [....] CPUFreq Utilities: Setting ondemand CPUFreq governor...CPU0...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Starting OpenBSD Secure Shell server: sshd[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c.
Debian GNU/Linux 7.0 snow ttySAC3
snow login: root root Password: root
[PYBOOT] [snow 01:45]: Timed out waiting for "<type 'str'>":
[PYBOOT] [snow 01:46]: got exception: timeout ~$off
[PYBOOT] [snow 01:47]: Done. Board snowball-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.976348] NET: Registered protocol family 29 [ 1.980834] can: raw protocol (rev 20120528) [ 1.985137] can: broadcast manager protocol (rev 20120528 t) [ 1.990844] can: netlink gateway (rev 20130117) max_hops=1 [ 1.997192] Key type dns_resolver registered [ 2.000061] mmc3: new high speed MMC card at address 0001 [ 2.001831] mmcblk3: mmc3:0001 3.53 GiB [ 2.002227] mmcblk3boot0: mmc3:0001 partition 1 2.00 MiB [ 2.002563] mmcblk3boot1: mmc3:0001 partition 2 2.00 MiB [ 2.002899] mmcblk3rpmb: mmc3:0001 partition 3 128 KiB [ 2.008239] mmcblk3: p1 p2 p3 p4 [ 2.030731] ThumbEE CPU extension supported. [ 2.035064] Registering SWP/SWPB emulation handler [ 2.042510] input: gpio_keys as /devices/soc0/gpio_keys/input/input0 [ 2.049285] rtc-pl031 80154000.rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 2.058471] thermal cooling_device0: thermal-cpufreq-0 bind to 0: 0-succeed [ 2.065490] thermal cooling_device0: thermal-cpufreq-0 bind to 1: 0-succeed [ 2.072479] thermal cooling_device0: thermal-cpufreq-0 bind to 2: 0-succeed [ 2.079437] db8500-cpufreq-cooling soc:cpufreq-cooling: Cooling device registered: thermal-cpufreq-0 [ 2.092712] db8500-esram12: disabling [ 2.096527] db8500-esram34: disabling [ 2.100250] en-3v3-fixed-supply: disabling [ 2.104583] V-CSI/DSI: disabling [ 2.107849] mmci-reg: disabling [ 2.111541] uart-pl011 80007000.uart: DMA channel TX dma0chan20 [ 2.117492] uart-pl011 80007000.uart: DMA channel RX dma0chan21 [ 2.123870] Waiting for root device /dev/mmcblk0p4... Connected. cu: Got hangup signal cu: waitpid: No child processes Connected.
Disconnected.
[PYBOOT] [snowball 02:07]: Timed out waiting for "<type 'str'>":
[PYBOOT] [snowball 02:08]: got exception: timeout ~$off
[PYBOOT] [snowball 02:09]: Done. Board snowball-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
ledtrig-cpu: registered to indicate activity on CPUs usbcore: registered new interface driver usbhid usbhid: USB HID core driver NET: Registered protocol family 10 sit: IPv6 over IPv4 tunneling driver NET: Registered protocol family 17 can: controller area network core (rev 20120528 abi 9) NET: Registered protocol family 29 can: raw protocol (rev 20120528) can: broadcast manager protocol (rev 20120528 t) can: netlink gateway (rev 20130117) max_hops=1 Key type dns_resolver registered ThumbEE CPU extension supported. input: gpio_keys as /devices/soc0/gpio_keys/input/input0 rtc-pl031 80154000.rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) thermal cooling_device0: thermal-cpufreq-0 bind to 0: 0-succeed thermal cooling_device0: thermal-cpufreq-0 bind to 1: 0-succeed thermal cooling_device0: thermal-cpufreq-0 bind to 2: 0-succeed db8500-cpufreq-cooling soc:cpufreq-cooling: Cooling device registered: thermal-cpufreq-0 db8500-esram12: disabling db8500-esram34: disabling en-3v3-fixed-supply: disabling V-CSI/DSI: disabling mmci-reg: disabling uart-pl011 80007000.uart: DMA channel TX dma0chan20 uart-pl011 80007000.uart: DMA channel RX dma0chan21 Waiting for root device /dev/mmcblk0p4... mmc3: new high speed MMC card at address 0001 mmcblk3: mmc3:0001 3.53 GiB mmcblk3boot0: mmc3:0001 partition 1 2.00 MiB mmcblk3boot1: mmc3:0001 partition 2 2.00 MiB mmcblk3rpmb: mmc3:0001 partition 3 128 KiB mmcblk3: p1 p2 p3 p4
[PYBOOT] [snowball 01:57]: Timed out waiting for "<type 'str'>":
[PYBOOT] [snowball 01:58]: got exception: timeout ~$off
[PYBOOT] [snowball 01:59]: Done. Board snowball-arm-u8500_defconfig failure log: -------------------------------------------------
[ 2.568298] coresight-etm3x 801af000.ptm: PTM 1.0 initialized [ 2.580932] ux500-msp-i2s ux500-msp-i2s.1: Failed to get DMA channel capabilities, falling back to period counting: -6 [ 2.591644] snd-soc-mop500 snd-soc-mop500.0: ab8500-codec-dai.0 <-> ux500-msp-i2s.1 mapping ok [ 2.601562] ux500-msp-i2s ux500-msp-i2s.3: Failed to get DMA channel capabilities, falling back to period counting: -6 [ 2.612304] snd-soc-mop500 snd-soc-mop500.0: ab8500-codec-dai.1 <-> ux500-msp-i2s.3 mapping ok [ 2.635894] NET: Registered protocol family 10 [ 2.641204] sit: IPv6 over IPv4 tunneling driver [ 2.646545] NET: Registered protocol family 17 [ 2.651092] NET: Registered protocol family 35 [ 2.655609] NET: Registered protocol family 37 [ 2.660156] Registering SWP/SWPB emulation handler [ 2.666809] input: gpio_keys as /devices/soc0/gpio_keys/input/input1 [ 2.679077] ab8500-rtc ab8500-rtc.0: setting system clock to 2000-04-17 02:42:02 UTC (955939322) [ 2.688262] thermal cooling_device0: thermal-cpufreq-0 bind to 0: 0-succeed [ 2.695343] thermal cooling_device0: thermal-cpufreq-0 bind to 1: 0-succeed [ 2.702392] thermal cooling_device0: thermal-cpufreq-0 bind to 2: 0-succeed [ 2.709381] db8500-cpufreq-cooling soc:cpufreq-cooling: Cooling device registered: thermal-cpufreq-0 [ 2.723114] db8500-esram12: disabling [ 2.726867] db8500-esram34: disabling [ 2.730590] en-3v3-fixed-supply: disabling [ 2.734893] V-CSI/DSI: disabling [ 2.738159] mmci-reg: disabling [ 2.741455] ALSA device list: [ 2.744415] #0: MOP500-card [ 2.747711] uart-pl011 80007000.uart: DMA channel TX dma0chan24 [ 2.753692] uart-pl011 80007000.uart: DMA channel RX dma0chan25 [ 2.759857] Waiting for root device /dev/mmcblk0p4... Connected. cu: Got hangup signal cu: waitpid: No child processes Connected.
Disconnected.
[PYBOOT] [snowball 01:59]: Timed out waiting for "<type 'str'>":
[PYBOOT] [snowball 02:00]: got exception: timeout ~$off
[PYBOOT] [snowball 02:01]: Done.