Full logs are available at http://arm-soc.lixom.net/bootlogs/mainline/v4.6-rc5-224-gda9373d/
Failed boards:
arndale arm-multi_v7_nosmp_defconfig : FAILED 2:38.85 bbb arm-omap2plus_defconfig : FAILED 1:54.41 bbb arm-multi_v7_defconfig : FAILED 1:56.32 bbb arm-multi_v7_nosmp_defconfig : FAILED 2:17.69 beagleboard-x15 arm-omap2plus_defconfig : FAILED 1:46.17 beagleboard-x15 arm-multi_v7_defconfig : FAILED 1:44.10 beagleboard-x15 arm-multi_lpae_defconfig : FAILED 1:51.78 beagleboard-x15 arm-multi_v7_nosmp_defconfig : FAILED 2:06.11 colombus arm-multi_v7_nosmp_defconfig : FAILED 3:19.99 cosmic arm-imx_v6_v7_defconfig : FAILED 2:01.37 cosmic arm-multi_v7_defconfig : FAILED 2:03.80 cosmic arm-multi_v7_nosmp_defconfig : FAILED 2:16.18 dalmore arm-tegra_defconfig : FAILED 1:49.89 dalmore arm-multi_v7_defconfig : FAILED 1:55.88 dalmore arm-multi_lpae_defconfig : FAILED 2:03.95 dalmore arm-multi_v7_nosmp_defconfig : FAILED 1:51.07 minnowmax minnowmax_defconfig : NO BUILD odroidu3 arm-exynos_defconfig : FAILED 2:05.65 omap5uevm arm-multi_v7_defconfig : FAILED 2:13.34 omap5uevm arm-multi_lpae_defconfig : FAILED 2:10.90 omap5uevm arm-multi_v7_nosmp_defconfig : FAILED 1:47.92 seaboard arm-tegra_defconfig : FAILED 1:49.99 seaboard arm-multi_v7_defconfig : FAILED 2:13.68 seaboard arm-multi_v7_nosmp_defconfig : FAILED 1:52.05 snow arm-multi_v7_nosmp_defconfig : FAILED 3:13.51 snowball arm-u8500_defconfig : FAILED 1:57.09 snowball arm-multi_v7_defconfig : FAILED 2:19.27 snowball arm-multi_v7_nosmp_defconfig : FAILED 2:02.90 wandboard arm-imx_v6_v7_defconfig : FAILED 2:58.84
Successful boards:
apc arm-vt8500_v6_v7_defconfig : passed 1:11.85 arndale arm-exynos_defconfig : passed 1:30.16 arndale arm-multi_v7_defconfig : passed 1:17.50 arndale arm-multi_lpae_defconfig : passed 1:32.70 capri arm-bcm_defconfig : passed 0:48.68 capri arm-multi_v7_defconfig : passed 1:07.26 capri arm-multi_v7_nosmp_defconfig : warnings 1:10.54 chitra powerpc-pasemi_defconfig : passed 2:09.00 chitra powerpc-ppc64_defconfig : passed 2:02.46 colombus arm-sunxi_defconfig : passed 2:17.60 colombus arm-multi_v7_defconfig : passed 2:52.44 colombus arm-multi_lpae_defconfig : passed 2:39.85 cubie arm-sunxi_defconfig : passed 0:51.35 cubie arm-multi_v7_defconfig : passed 0:55.56 cubie arm-multi_v7_nosmp_defconfig : passed 1:09.02 cubie2 arm-sunxi_defconfig : passed 0:52.35 cubie2 arm-multi_v7_defconfig : passed 0:55.53 cubie2 arm-multi_lpae_defconfig : passed 1:01.10 cubie2 arm-multi_v7_nosmp_defconfig : warnings 1:03.15 cubox arm-multi_v7_defconfig : passed 1:08.90 cubox arm-mvebu_v7_defconfig : passed 1:16.26 cubox arm-multi_v7_nosmp_defconfig : passed 1:27.18 hummingboard arm-imx_v6_v7_defconfig : passed 1:33.54 hummingboard arm-multi_v7_defconfig : passed 1:47.23 hummingboard arm-multi_v7_nosmp_defconfig : warnings 1:12.96 jetsontk1 arm-tegra_defconfig : passed 1:31.66 jetsontk1 arm-multi_v7_defconfig : passed 1:33.58 jetsontk1 arm-multi_lpae_defconfig : passed 1:50.99 jetsontk1 arm-multi_v7_nosmp_defconfig : warnings 1:39.42 omap5uevm arm-omap2plus_defconfig : passed 1:04.15 pandaes arm-omap2plus_defconfig : warnings 1:37.76 pandaes arm-multi_v7_defconfig : passed 1:46.24 pandaes arm-multi_v7_nosmp_defconfig : warnings 2:03.77 pi arm-exynos_defconfig : passed 2:09.89 pi arm-multi_v7_defconfig : passed 2:13.34 pi arm-multi_lpae_defconfig : passed 2:24.60 pi arm-multi_v7_nosmp_defconfig : warnings 2:13.38 pit arm-exynos_defconfig : passed 2:13.58 pit arm-multi_v7_defconfig : passed 2:14.02 pit arm-multi_lpae_defconfig : passed 2:26.64 pit arm-multi_v7_nosmp_defconfig : warnings 2:15.28 seattle arm64-defconfig : warnings 2:22.89 snow arm-exynos_defconfig : passed 2:08.59 snow arm-multi_v7_defconfig : passed 2:25.97 snow arm-multi_lpae_defconfig : passed 1:59.06 trimslice arm-tegra_defconfig : passed 1:31.21 trimslice arm-multi_v7_defconfig : passed 3:30.27 trimslice arm-multi_v7_nosmp_defconfig : warnings 1:35.45 wandboard arm-multi_v7_defconfig : passed 1:17.49 wandboard arm-multi_v7_nosmp_defconfig : warnings 1:15.54
Offline boards:
beaver arm-tegra_defconfig : OFFLINE 2:13.33 beaver arm-multi_v7_defconfig : OFFLINE 2:49.96 beaver arm-multi_v7_nosmp_defconfig : OFFLINE 2:12.24 colibri-vf61 arm-imx_v6_v7_defconfig : OFFLINE 1:15.28 colibri-vf61 arm-multi_v7_defconfig : OFFLINE 1:16.25 colibri-vf61 arm-multi_v7_nosmp_defconfig : OFFLINE 1:28.39 parallella arm-multi_v7_defconfig : OFFLINE 2:58.90 parallella arm-multi_v7_nosmp_defconfig : OFFLINE 2:14.50 rk3288evb arm-multi_v7_defconfig : OFFLINE 0:56.15 rk3288evb arm-multi_lpae_defconfig : OFFLINE 1:02.99 rk3288evb arm-multi_v7_nosmp_defconfig : OFFLINE 0:40.78 sama5 arm-sama5_defconfig : OFFLINE 2:14.99 sama5d3-xplained arm-sama5_defconfig : OFFLINE 2:27.27 socfpga arm-socfpga_defconfig : OFFLINE 2:40.86 socfpga arm-multi_v7_defconfig : OFFLINE 2:35.93 socfpga arm-multi_v7_nosmp_defconfig : OFFLINE 2:12.11
Board legend is available at http://arm-soc.lixom.net/boards.html
Board arndale-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
[ 2.038366] ahci 122f0000.sata: couldn't get PHY in node sata: -517 [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.6.0-rc5-00224-gda9373d (build@brutus) (gcc version 4.9.2 (GCC) ) #1 Sat Apr 30 20:51:36 PDT 2016 [ 2.059736] [c1038dc0] *pgd=4100041e(bad) [ 0.000000] CPU: ARMv7 Processor [410fc0f4] revision 4 (ARMv7), cr=10c53c7d [ 0.000000] CPU: div instructions available: patching division code [ 2.076922] Modules linked in: [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache [ 0.000000] Machine model: Insignal Arndale evaluation board based on EXYNOS5250 [ 0.000000] cma: Reserved 64 MiB at 0xbc000000 [ 0.000000] Memory policy: Data cache writeback [ 0.000000] Samsung CPU ID: 0x43520010 [ 0.000000] On node 0 totalpages: 520192 [ 0.000000] free_area_init_node: node 0, pgdat c10fd420, node_mem_map eeff7000 [ 0.000000] DMA zone: 1536 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 192512 pages, LIFO batch:31 [ 0.000000] HighMem zone: 327680 pages, LIFO batch:31 [ 0.000000] ------------[ cut here ]------------ [ 0.000000] WARNING: CPU: 0 PID: 0 at /home/build/work/batch/arch/arm/kernel/devtree.c:149 arm_dt_init_cpu_maps+0xd4/0x130 [ 0.000000] DT /cpu 2 nodes greater than max cores 1, capping them [ 0.000000] Modules linked in: [ 0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 4.6.0-rc5-00224-gda9373d #1 [ 0.000000] Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) [ 0.000000] [<c030e900>] (unwind_backtrace) from [<c030b474>] (show_stack+0x10/0x14) [ 0.000000] [<c030b474>] (show_stack) from [<c0335db0>] (__warn+0xe4/0xfc) [ 0.000000] [<c0335db0>] (__warn) from [<c0335e00>] (warn_slowpath_fmt+0x38/0x48) [ 0.000000] [<c0335e00>] (warn_slowpath_fmt) from [<c0f040e8>] (arm_dt_init_cpu_maps+0xd4/0x130) [ 0.000000] [<c0f040e8>] (arm_dt_init_cpu_maps) from [<c0f03424>] (setup_arch+0x7b8/0x8ec) [ 0.000000] [<c0f03424>] (setup_arch) from [<c0f00944>] (start_kernel+0x68/0x370) [ 0.000000] [<c0f00944>] (start_kernel) from [<40208078>] (0x40208078) [ 0.000000] ---[ end trace cb88537fdc8fa200 ]--- [ 0.000000] CPU: All CPU(s) started in HYP mode.
[PYBOOT] [arndale 02:35]: Timed out waiting for "<type 'str'>":
[PYBOOT] [arndale 02:36]: got exception: timeout ~$off
[PYBOOT] [arndale 02:38]: Done. Board bbb-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.625965] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.636238] ledtrig-cpu: registered to indicate activity on CPUs [ 1.643311] usbcore: registered new interface driver usbhid [ 1.649234] usbhid: USB HID core driver [ 1.661289] NET: Registered protocol family 10 [ 1.667860] sit: IPv6 over IPv4 tunneling driver [ 1.673975] NET: Registered protocol family 17 [ 1.678745] can: controller area network core (rev 20120528 abi 9) [ 1.685391] NET: Registered protocol family 29 [ 1.690111] can: raw protocol (rev 20120528) [ 1.694631] can: broadcast manager protocol (rev 20120528 t) [ 1.700624] can: netlink gateway (rev 20130117) max_hops=1 [ 1.707372] Key type dns_resolver registered [ 1.712273] omap_voltage_late_init: Voltage driver support not added [ 1.720558] ThumbEE CPU extension supported. [ 1.725179] Registering SWP/SWPB emulation handler [ 1.767522] tps65217 0-0024: TPS65217 ID 0xe version 1.2 [ 1.774072] at24 0-0050: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.781840] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 1.790523] at24 2-0054: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.798452] at24 2-0055: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.806282] at24 2-0056: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.814088] at24 2-0057: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.821439] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz [ 1.830156] cpufreq: cpufreq_online: CPU0: Running at unlisted freq: 550000 KHz [ 1.838095] cpufreq: cpufreq_online: CPU0: Unlisted initial frequency changed to: 600000 KHz [ 1.847839] mmc1: new high speed MMC card at address 0001 [ 1.855063] hctosys: unable to open rtc device (rtc0) [ 1.868179] mmcblk1: mmc1:0001 MMC02G 1.79 GiB [ 1.874211] mmcblk1boot0: mmc1:0001 MMC02G partition 1 1.00 MiB [ 1.881201] mmcblk1boot1: mmc1:0001 MMC02G partition 2 1.00 MiB [ 1.890033] mmcblk1: p1 p2 [ 1.895740] Waiting for root device /dev/mmcblk0p2...
[PYBOOT] [bbb 01:52]: Timed out waiting for "<type 'str'>":
[PYBOOT] [bbb 01:53]: got exception: timeout ~$off
[PYBOOT] [bbb 01:54]: Done. Board bbb-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
[ 1.314457] sdhci: Secure Digital Host Controller Interface driver [ 1.320981] sdhci: Copyright(c) Pierre Ossman [ 1.326792] omap_hsmmc 48060000.mmc: Got CD GPIO [ 1.389999] Synopsys Designware Multimedia Card Interface Driver [ 1.397382] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.406560] ledtrig-cpu: registered to indicate activity on CPUs [ 1.413292] usbcore: registered new interface driver usbhid [ 1.419170] usbhid: USB HID core driver [ 1.428661] NET: Registered protocol family 10 [ 1.435137] sit: IPv6 over IPv4 tunneling driver [ 1.440993] NET: Registered protocol family 17 [ 1.445732] can: controller area network core (rev 20120528 abi 9) [ 1.452329] NET: Registered protocol family 29 [ 1.457026] can: raw protocol (rev 20120528) [ 1.461542] can: broadcast manager protocol (rev 20120528 t) [ 1.467520] can: netlink gateway (rev 20130117) max_hops=1 [ 1.474019] Key type dns_resolver registered [ 1.478879] omap_voltage_late_init: Voltage driver support not added [ 1.486676] ThumbEE CPU extension supported. [ 1.499204] at24 0-0050: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.506842] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 1.514910] at24 2-0054: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.522666] at24 2-0055: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.530351] at24 2-0056: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.538034] at24 2-0057: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.545333] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz [ 1.553027] hctosys: unable to open rtc device (rtc0) [ 1.563814] Waiting for root device /dev/mmcblk0p2... [ 1.599270] mmc1: new high speed MMC card at address 0001 [ 1.605727] mmcblk1: mmc1:0001 MMC02G 1.79 GiB [ 1.610800] mmcblk1boot0: mmc1:0001 MMC02G partition 1 1.00 MiB [ 1.617287] mmcblk1boot1: mmc1:0001 MMC02G partition 2 1.00 MiB [ 1.625712] mmcblk1: p1 p2
[PYBOOT] [bbb 02:15]: Timed out waiting for "<type 'str'>":
[PYBOOT] [bbb 02:16]: got exception: timeout ~$off
[PYBOOT] [bbb 02:17]: Done. Board bbb-arm-omap2plus_defconfig failure log: -------------------------------------------------
[ 2.053006] omap_hsmmc 481d8000.mmc: lookup for GPIO cd failed [ 2.059133] omap_hsmmc 481d8000.mmc: GPIO lookup for consumer wp [ 2.065469] omap_hsmmc 481d8000.mmc: using device tree for GPIO lookup [ 2.072353] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@481d8000[0]' [ 2.081962] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@481d8000[0]' [ 2.091474] omap_hsmmc 481d8000.mmc: using lookup tables for GPIO lookup [ 2.098502] omap_hsmmc 481d8000.mmc: lookup for GPIO wp failed [ 2.141747] ledtrig-cpu: registered to indicate activity on CPUs [ 2.150438] oprofile: using arm/armv7 [ 2.155590] Initializing XFRM netlink socket [ 2.160677] NET: Registered protocol family 10 [ 2.171526] sit: IPv6 over IPv4 tunneling driver [ 2.180316] NET: Registered protocol family 17 [ 2.185263] NET: Registered protocol family 15 [ 2.190529] Key type dns_resolver registered [ 2.195393] omap_voltage_late_init: Voltage driver support not added [ 2.202141] sr_dev_init: No voltage domain specified for smartreflex0. Cannot initialize [ 2.210620] sr_dev_init: No voltage domain specified for smartreflex1. Cannot initialize [ 2.220892] ThumbEE CPU extension supported. [ 2.225559] Registering SWP/SWPB emulation handler [ 2.230603] SmartReflex Class3 initialized [ 2.300239] tps65217 0-0024: TPS65217 ID 0xe version 1.2 [ 2.307529] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 2.318125] mmc1: new high speed MMC card at address 0001 [ 2.330241] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz [ 2.338606] mmcblk1: mmc1:0001 MMC02G 1.79 GiB [ 2.346406] hctosys: unable to open rtc device (rtc0) [ 2.351868] sr_init: No PMIC hook to init smartreflex [ 2.357538] sr_init: platform driver register failed for SR [ 2.397869] mmcblk1boot0: mmc1:0001 MMC02G partition 1 1.00 MiB [ 2.405868] mmcblk1boot1: mmc1:0001 MMC02G partition 2 1.00 MiB [ 2.420153] mmcblk1: p1 p2 [ 2.437577] Waiting for root device /dev/mmcblk0p2...
[PYBOOT] [bbb 01:51]: Timed out waiting for "<type 'str'>":
[PYBOOT] [bbb 01:52]: got exception: timeout ~$off
[PYBOOT] [bbb 01:53]: Done. Board beagleboard-x15-arm-multi_lpae_defconfig failure log: -------------------------------------------------
[ 1.722390] at24 0-0050: 4096 byte 24c32 EEPROM, writable, 1 bytes/write [ 1.729454] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 1.755649] rtc-ds1307 2-006f: SET TIME! [ 1.761402] rtc-ds1307 2-006f: rtc core: registered mcp7941x as rtc0 [ 1.768149] rtc-ds1307 2-006f: 64 bytes nvram [ 1.772755] omap_i2c 48060000.i2c: bus 2 rev0.12 at 400 kHz [ 1.780928] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 1.786704] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 [ 1.794930] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x00010010 [ 1.804084] xhci-hcd xhci-hcd.0.auto: irq 400, io mem 0x48890000 [ 1.810957] hub 1-0:1.0: USB hub found [ 1.814898] hub 1-0:1.0: 1 port detected [ 1.819278] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 1.825038] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 [ 1.833132] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.842127] hub 2-0:1.0: USB hub found [ 1.846084] hub 2-0:1.0: 1 port detected [ 1.852106] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 1.886224] vdd_3v3: supplied by regen1 [ 1.925183] rtc-ds1307 2-006f: setting system clock to 2001-01-01 00:00:00 UTC (978307200) [ 1.943115] aic_dvdd_fixed: disabling [ 1.947859] Waiting for root device /dev/mmcblk0p1... [ 1.977221] mmc1: new high speed MMC card at address 0001 [ 1.983188] mmcblk1: mmc1:0001 S10004 3.56 GiB [ 1.988079] mmcblk1boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 1.994415] mmcblk1boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 2.001287] mmcblk1: p1 [ 2.125144] usb 1-1: new high-speed USB device number 2 using xhci-hcd [ 2.160170] usb 2-1: new SuperSpeed USB device number 2 using xhci-hcd [ 2.185289] hub 2-1:1.0: USB hub found [ 2.189261] hub 2-1:1.0: 4 ports detected [ 2.281276] hub 1-1:1.0: USB hub found [ 2.285253] hub 1-1:1.0: 4 ports detected
[PYBOOT] [beagleboard-x15 01:48]: Timed out waiting for "<type 'str'>":
[PYBOOT] [beagleboard-x15 01:49]: got exception: timeout ~$off
[PYBOOT] [beagleboard-x15 01:50]: Done. Board beagleboard-x15-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.712267] at24 0-0050: 4096 byte 24c32 EEPROM, writable, 1 bytes/write [ 1.719338] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 1.745673] rtc-ds1307 2-006f: SET TIME! [ 1.751404] rtc-ds1307 2-006f: rtc core: registered mcp7941x as rtc0 [ 1.758149] rtc-ds1307 2-006f: 64 bytes nvram [ 1.762761] omap_i2c 48060000.i2c: bus 2 rev0.12 at 400 kHz [ 1.770948] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 1.776728] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 [ 1.784963] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x00010010 [ 1.794117] xhci-hcd xhci-hcd.0.auto: irq 400, io mem 0x48890000 [ 1.800995] hub 1-0:1.0: USB hub found [ 1.804940] hub 1-0:1.0: 1 port detected [ 1.809342] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 1.815113] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 [ 1.823216] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.832230] hub 2-0:1.0: USB hub found [ 1.836202] hub 2-0:1.0: 1 port detected [ 1.842234] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 1.876276] vdd_3v3: supplied by regen1 [ 1.913472] rtc-ds1307 2-006f: setting system clock to 2001-01-01 00:00:00 UTC (978307200) [ 1.930399] aic_dvdd_fixed: disabling [ 1.934990] Waiting for root device /dev/mmcblk0p1... [ 1.962229] mmc1: new high speed MMC card at address 0001 [ 1.968201] mmcblk1: mmc1:0001 S10004 3.56 GiB [ 1.973085] mmcblk1boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 1.979418] mmcblk1boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 1.986286] mmcblk1: p1 [ 2.115173] usb 1-1: new high-speed USB device number 2 using xhci-hcd [ 2.150198] usb 2-1: new SuperSpeed USB device number 2 using xhci-hcd [ 2.175358] hub 2-1:1.0: USB hub found [ 2.179323] hub 2-1:1.0: 4 ports detected [ 2.271358] hub 1-1:1.0: USB hub found [ 2.275335] hub 1-1:1.0: 4 ports detected
[PYBOOT] [beagleboard-x15 01:41]: Timed out waiting for "<type 'str'>":
[PYBOOT] [beagleboard-x15 01:42]: got exception: timeout ~$off
[PYBOOT] [beagleboard-x15 01:43]: Done. Board beagleboard-x15-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
[ 1.595323] at24 0-0050: 4096 byte 24c32 EEPROM, writable, 1 bytes/write [ 1.602366] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 1.627699] rtc-ds1307 2-006f: SET TIME! [ 1.633317] rtc-ds1307 2-006f: rtc core: registered mcp7941x as rtc0 [ 1.640030] rtc-ds1307 2-006f: 64 bytes nvram [ 1.644617] omap_i2c 48060000.i2c: bus 2 rev0.12 at 400 kHz [ 1.651992] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 1.657765] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 [ 1.665980] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x00010010 [ 1.675125] xhci-hcd xhci-hcd.0.auto: irq 400, io mem 0x48890000 [ 1.681847] hub 1-0:1.0: USB hub found [ 1.685800] hub 1-0:1.0: 1 port detected [ 1.690120] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 1.695881] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 [ 1.703954] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.712820] hub 2-0:1.0: USB hub found [ 1.716759] hub 2-0:1.0: 1 port detected [ 1.722022] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 1.757918] vdd_3v3: supplied by regen1 [ 1.789030] rtc-ds1307 2-006f: setting system clock to 2001-01-01 00:00:00 UTC (978307200) [ 1.802052] aic_dvdd_fixed: disabling [ 1.807417] Waiting for root device /dev/mmcblk0p1... [ 1.854236] mmc1: new high speed MMC card at address 0001 [ 1.860103] mmcblk1: mmc1:0001 S10004 3.56 GiB [ 1.864932] mmcblk1boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 1.871228] mmcblk1boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 1.878016] mmcblk1: p1 [ 1.997237] usb 1-1: new high-speed USB device number 2 using xhci-hcd [ 2.027257] usb 2-1: new SuperSpeed USB device number 2 using xhci-hcd [ 2.056055] hub 2-1:1.0: USB hub found [ 2.060032] hub 2-1:1.0: 4 ports detected [ 2.152059] hub 1-1:1.0: USB hub found [ 2.156028] hub 1-1:1.0: 4 ports detected
[PYBOOT] [beagleboard-x15 02:03]: Timed out waiting for "<type 'str'>":
[PYBOOT] [beagleboard-x15 02:04]: got exception: timeout ~$off
[PYBOOT] [beagleboard-x15 02:05]: Done. Board beagleboard-x15-arm-omap2plus_defconfig failure log: -------------------------------------------------
[ 2.185425] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 2.192294] of_get_named_gpiod_flags: parsed 'cd-gpios' property of node '/ocp/mmc@4809c000[0]' - status (0) [ 2.202683] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 2.207541] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer wp [ 2.213848] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 2.220699] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@4809c000[0]' [ 2.230284] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@4809c000[0]' [ 2.239779] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 2.246840] omap_hsmmc 4809c000.mmc: lookup for GPIO wp failed [ 2.293657] omap_hsmmc 480b4000.mmc: GPIO lookup for consumer cd [ 2.299955] omap_hsmmc 480b4000.mmc: using device tree for GPIO lookup [ 2.306822] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/ocp/mmc@480b4000[0]' [ 2.316422] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/ocp/mmc@480b4000[0]' [ 2.325926] omap_hsmmc 480b4000.mmc: using lookup tables for GPIO lookup [ 2.332961] omap_hsmmc 480b4000.mmc: lookup for GPIO cd failed [ 2.339081] omap_hsmmc 480b4000.mmc: GPIO lookup for consumer wp [ 2.345386] omap_hsmmc 480b4000.mmc: using device tree for GPIO lookup [ 2.352220] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@480b4000[0]' [ 2.361796] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@480b4000[0]' [ 2.371284] omap_hsmmc 480b4000.mmc: using lookup tables for GPIO lookup [ 2.378331] omap_hsmmc 480b4000.mmc: lookup for GPIO wp failed [ 2.385037] vdd_3v3: supplied by regen1 [ 2.423844] hctosys: unable to open rtc device (rtc0) [ 2.429145] sr_init: No PMIC hook to init smartreflex [ 2.434658] sr_init: platform driver register failed for SR [ 2.481182] aic_dvdd_fixed: disabling [ 2.485411] ldousb: disabling [ 2.491549] Waiting for root device /dev/mmcblk0p1... [ 2.535293] mmc1: new high speed MMC card at address 0001 [ 2.543037] mmcblk1: mmc1:0001 S10004 3.56 GiB [ 2.548370] mmcblk1boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 2.555197] mmcblk1boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 2.563644] mmcblk1: p1
[PYBOOT] [beagleboard-x15 01:43]: Timed out waiting for "<type 'str'>":
[PYBOOT] [beagleboard-x15 01:44]: got exception: timeout ~$off
[PYBOOT] [beagleboard-x15 01:45]: Done. Board colombus-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
[....] Synthesizing the initial hotplug events...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Waiting for /dev to be fully populated...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Activating swap...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [ 41.808529] EXT4-fs (mmcblk0p1): warning: mounting fs with errors, running e2fsck is recommended [ 41.822864] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [....] Cleaning up temporary files... /tmp[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] Activating lvm and md swap...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Checking file systems...fsck from util-linux 2.20.1 [?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Mounting local filesystems...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Activating swapfile swap...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Cleaning up temporary files...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] Setting kernel variables ...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [ 85.329561] random: dd urandom read with 59 bits of entropy available [....] Configuring network interfaces...Internet Systems Consortium DHCP Client 4.2.2 Copyright 2004-2011 Internet Systems Consortium. All rights reserved. For info, please visit https://www.isc.org/software/dhcp/
[ 89.749688] eth0: device MAC address 62:83:59:25:da:f1 [ 89.905569] RX IPC Checksum Offload disabled [ 89.910195] No MAC Management Counters available [ 89.915968] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready Listening on LPF/eth0/62:83:59:25:da:f1 Sending on LPF/eth0/62:83:59:25:da:f1 Sending on Socket/fallback DHCPREQUEST on eth0 to 255.255.255.255 port 67 DHCPREQUEST on eth0 to 255.255.255.255 port 67 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 7 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 19 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 7 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 12 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 12
[PYBOOT] [colombus 03:17]: Timed out waiting for "<type 'str'>":
[PYBOOT] [colombus 03:18]: got exception: timeout ~$off
[PYBOOT] [colombus 03:19]: Done. Board cosmic-arm-imx_v6_v7_defconfig failure log: -------------------------------------------------
[ 14.422546] blk_update_request: I/O error, dev mmcblk0, sector 3633185 [ 18.496790] mmcblk0: error -110 transferring data, sector 3633186, nr 230, cmd response 0x900, card status 0x0 [ 18.506901] blk_update_request: I/O error, dev mmcblk0, sector 3633186 [ 22.581090] mmcblk0: error -110 transferring data, sector 3633187, nr 229, cmd response 0x900, card status 0x0 [ 22.591201] blk_update_request: I/O error, dev mmcblk0, sector 3633187 [ 26.665452] mmcblk0: error -110 transferring data, sector 3633188, nr 228, cmd response 0x900, card status 0x0 [ 26.675566] blk_update_request: I/O error, dev mmcblk0, sector 3633188 [ 30.749802] mmcblk0: error -110 transferring data, sector 3633189, nr 227, cmd response 0x900, card status 0x0 [ 30.759919] blk_update_request: I/O error, dev mmcblk0, sector 3633189 [ 34.834162] mmcblk0: error -110 transferring data, sector 3633190, nr 226, cmd response 0x900, card status 0x0 [ 34.844275] blk_update_request: I/O error, dev mmcblk0, sector 3633190 [ 38.918520] mmcblk0: error -110 transferring data, sector 3633191, nr 225, cmd response 0x900, card status 0x0 [ 38.928636] blk_update_request: I/O error, dev mmcblk0, sector 3633191 [ 43.002844] mmcblk0: error -110 transferring data, sector 3633192, nr 224, cmd response 0x900, card status 0x0 [ 43.012955] blk_update_request: I/O error, dev mmcblk0, sector 3633192 [ 47.087197] mmcblk0: error -110 transferring data, sector 3633193, nr 223, cmd response 0x900, card status 0x0 [ 47.097302] blk_update_request: I/O error, dev mmcblk0, sector 3633193 [ 51.171487] mmcblk0: error -110 transferring data, sector 3633194, nr 222, cmd response 0x900, card status 0x0 [ 51.181622] blk_update_request: I/O error, dev mmcblk0, sector 3633194 [ 55.255972] mmcblk0: error -110 transferring data, sector 3633195, nr 221, cmd response 0x900, card status 0x0 [ 55.266080] blk_update_request: I/O error, dev mmcblk0, sector 3633195 [ 59.340315] mmcblk0: error -110 transferring data, sector 3633196, nr 220, cmd response 0x900, card status 0x0 [ 59.350426] blk_update_request: I/O error, dev mmcblk0, sector 3633196 [ 63.424667] mmcblk0: error -110 transferring data, sector 3633197, nr 219, cmd response 0x900, card status 0x0 [ 63.434780] blk_update_request: I/O error, dev mmcblk0, sector 3633197 [ 67.509014] mmcblk0: error -110 transferring data, sector 3633198, nr 218, cmd response 0x900, card status 0x0 [ 67.519125] blk_update_request: I/O error, dev mmcblk0, sector 3633198 [ 71.593309] mmcblk0: error -110 transferring data, sector 3633199, nr 217, cmd response 0x900, card status 0x0 [ 71.603420] blk_update_request: I/O error, dev mmcblk0, sector 3633199 [ 75.677661] mmcblk0: error -110 transferring data, sector 3633200, nr 216, cmd response 0x900, card status 0x0 [ 75.687774] blk_update_request: I/O error, dev mmcblk0, sector 3633200 [ 79.761953] mmcblk0: error -110 transferring data, sector 3633201, nr 215, cmd response 0x900, card status 0x0 [ 79.772068] blk_update_request: I/O error, dev mmcblk0, sector 3633201
[PYBOOT] [cosmic 01:58]: Timed out waiting for "<type 'str'>":
[PYBOOT] [cosmic 01:59]: got exception: timeout ~$off
[PYBOOT] [cosmic 02:00]: Done. Board cosmic-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 14.083305] blk_update_request: I/O error, dev mmcblk0, sector 3633185 [ 18.157289] mmcblk0: error -110 transferring data, sector 3633186, nr 230, cmd response 0x900, card status 0x0 [ 18.167365] blk_update_request: I/O error, dev mmcblk0, sector 3633186 [ 22.241343] mmcblk0: error -110 transferring data, sector 3633187, nr 229, cmd response 0x900, card status 0x0 [ 22.251418] blk_update_request: I/O error, dev mmcblk0, sector 3633187 [ 26.325402] mmcblk0: error -110 transferring data, sector 3633188, nr 228, cmd response 0x900, card status 0x0 [ 26.335476] blk_update_request: I/O error, dev mmcblk0, sector 3633188 [ 30.409456] mmcblk0: error -110 transferring data, sector 3633189, nr 227, cmd response 0x900, card status 0x0 [ 30.419537] blk_update_request: I/O error, dev mmcblk0, sector 3633189 [ 34.493523] mmcblk0: error -110 transferring data, sector 3633190, nr 226, cmd response 0x900, card status 0x0 [ 34.503606] blk_update_request: I/O error, dev mmcblk0, sector 3633190 [ 38.577590] mmcblk0: error -110 transferring data, sector 3633191, nr 225, cmd response 0x900, card status 0x0 [ 38.587661] blk_update_request: I/O error, dev mmcblk0, sector 3633191 [ 42.661642] mmcblk0: error -110 transferring data, sector 3633192, nr 224, cmd response 0x900, card status 0x0 [ 42.671712] blk_update_request: I/O error, dev mmcblk0, sector 3633192 [ 46.745684] mmcblk0: error -110 transferring data, sector 3633193, nr 223, cmd response 0x900, card status 0x0 [ 46.755754] blk_update_request: I/O error, dev mmcblk0, sector 3633193 [ 50.829740] mmcblk0: error -110 transferring data, sector 3633194, nr 222, cmd response 0x900, card status 0x0 [ 50.839814] blk_update_request: I/O error, dev mmcblk0, sector 3633194 [ 54.913796] mmcblk0: error -110 transferring data, sector 3633195, nr 221, cmd response 0x900, card status 0x0 [ 54.923864] blk_update_request: I/O error, dev mmcblk0, sector 3633195 [ 58.997845] mmcblk0: error -110 transferring data, sector 3633196, nr 220, cmd response 0x900, card status 0x0 [ 59.007917] blk_update_request: I/O error, dev mmcblk0, sector 3633196 [ 63.081895] mmcblk0: error -110 transferring data, sector 3633197, nr 219, cmd response 0x900, card status 0x0 [ 63.091968] blk_update_request: I/O error, dev mmcblk0, sector 3633197 [ 67.165944] mmcblk0: error -110 transferring data, sector 3633198, nr 218, cmd response 0x900, card status 0x0 [ 67.176020] blk_update_request: I/O error, dev mmcblk0, sector 3633198 [ 71.249993] mmcblk0: error -110 transferring data, sector 3633199, nr 217, cmd response 0x900, card status 0x0 [ 71.260070] blk_update_request: I/O error, dev mmcblk0, sector 3633199 [ 75.334054] mmcblk0: error -110 transferring data, sector 3633200, nr 216, cmd response 0x900, card status 0x0 [ 75.344130] blk_update_request: I/O error, dev mmcblk0, sector 3633200 [ 79.418105] mmcblk0: error -110 transferring data, sector 3633201, nr 215, cmd response 0x900, card status 0x0 [ 79.428182] blk_update_request: I/O error, dev mmcblk0, sector 3633201
[PYBOOT] [cosmic 02:00]: Timed out waiting for "<type 'str'>":
[PYBOOT] [cosmic 02:01]: got exception: timeout ~$off
[PYBOOT] [cosmic 02:02]: Done. Board cosmic-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
[ 13.877629] blk_update_request: I/O error, dev mmcblk0, sector 3633185 [ 17.951552] mmcblk0: error -110 transferring data, sector 3633186, nr 230, cmd response 0x900, card status 0x0 [ 17.961611] blk_update_request: I/O error, dev mmcblk0, sector 3633186 [ 22.035534] mmcblk0: error -110 transferring data, sector 3633187, nr 229, cmd response 0x900, card status 0x0 [ 22.045594] blk_update_request: I/O error, dev mmcblk0, sector 3633187 [ 26.119516] mmcblk0: error -110 transferring data, sector 3633188, nr 228, cmd response 0x900, card status 0x0 [ 26.129574] blk_update_request: I/O error, dev mmcblk0, sector 3633188 [ 30.203491] mmcblk0: error -110 transferring data, sector 3633189, nr 227, cmd response 0x900, card status 0x0 [ 30.213548] blk_update_request: I/O error, dev mmcblk0, sector 3633189 [ 34.287471] mmcblk0: error -110 transferring data, sector 3633190, nr 226, cmd response 0x900, card status 0x0 [ 34.297531] blk_update_request: I/O error, dev mmcblk0, sector 3633190 [ 38.371456] mmcblk0: error -110 transferring data, sector 3633191, nr 225, cmd response 0x900, card status 0x0 [ 38.381537] blk_update_request: I/O error, dev mmcblk0, sector 3633191 [ 42.455458] mmcblk0: error -110 transferring data, sector 3633192, nr 224, cmd response 0x900, card status 0x0 [ 42.465520] blk_update_request: I/O error, dev mmcblk0, sector 3633192 [ 46.539437] mmcblk0: error -110 transferring data, sector 3633193, nr 223, cmd response 0x900, card status 0x0 [ 46.549488] blk_update_request: I/O error, dev mmcblk0, sector 3633193 [ 50.623403] mmcblk0: error -110 transferring data, sector 3633194, nr 222, cmd response 0x900, card status 0x0 [ 50.633451] blk_update_request: I/O error, dev mmcblk0, sector 3633194 [ 54.707367] mmcblk0: error -110 transferring data, sector 3633195, nr 221, cmd response 0x900, card status 0x0 [ 54.717415] blk_update_request: I/O error, dev mmcblk0, sector 3633195 [ 58.791329] mmcblk0: error -110 transferring data, sector 3633196, nr 220, cmd response 0x900, card status 0x0 [ 58.801381] blk_update_request: I/O error, dev mmcblk0, sector 3633196 [ 62.875300] mmcblk0: error -110 transferring data, sector 3633197, nr 219, cmd response 0x900, card status 0x0 [ 62.885355] blk_update_request: I/O error, dev mmcblk0, sector 3633197 [ 66.959275] mmcblk0: error -110 transferring data, sector 3633198, nr 218, cmd response 0x900, card status 0x0 [ 66.969328] blk_update_request: I/O error, dev mmcblk0, sector 3633198 [ 71.043248] mmcblk0: error -110 transferring data, sector 3633199, nr 217, cmd response 0x900, card status 0x0 [ 71.053301] blk_update_request: I/O error, dev mmcblk0, sector 3633199 [ 75.127225] mmcblk0: error -110 transferring data, sector 3633200, nr 216, cmd response 0x900, card status 0x0 [ 75.137283] blk_update_request: I/O error, dev mmcblk0, sector 3633200 [ 79.211200] mmcblk0: error -110 transferring data, sector 3633201, nr 215, cmd response 0x900, card status 0x0 [ 79.221257] blk_update_request: I/O error, dev mmcblk0, sector 3633201
[PYBOOT] [cosmic 02:12]: Timed out waiting for "<type 'str'>":
[PYBOOT] [cosmic 02:13]: got exception: timeout ~$off
[PYBOOT] [cosmic 02:14]: Done. Board dalmore-arm-multi_lpae_defconfig failure log: -------------------------------------------------
[ 2.477892] Key type dns_resolver registered [ 2.484334] ThumbEE CPU extension supported. [ 2.488758] Registering SWP/SWPB emulation handler [ 2.527444] vdd-sys-5v0: supplied by vdd_ac_bat [ 2.534700] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 2.544168] vdd_hdmi_5v0: supplied by vdd-sys-5v0 [ 2.559580] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.566399] [drm] No driver support for vblank timestamp query. [ 2.581909] mmc1: new high speed MMC card at address 0001 [ 2.589351] mmcblk1: mmc1:0001 SEM32G 29.1 GiB [ 2.595224] mmcblk1boot0: mmc1:0001 SEM32G partition 1 4.00 MiB [ 2.602345] mmcblk1boot1: mmc1:0001 SEM32G partition 2 4.00 MiB [ 2.609413] mmcblk1rpmb: mmc1:0001 SEM32G partition 3 4.00 MiB [ 2.620087] mmcblk1: p1 [ 2.744520] Console: switching to colour frame buffer device 240x75 [ 2.832192] drm drm: fb0: frame buffer device [ 2.850250] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 2.860295] usb2_vbus: supplied by vdd-sys-5v0 [ 2.871836] tegra-ehci 7d008000.usb: EHCI Host Controller [ 2.877433] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 2.886297] tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 [ 2.900264] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 2.909661] hub 1-0:1.0: USB hub found [ 2.913745] hub 1-0:1.0: 1 port detected [ 2.924559] input: gpio-keys as /devices/soc0/gpio-keys/input/input0 [ 2.939258] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 3.002207] dvdd_ts: disabling [ 3.005421] usb1_vbus: disabling [ 3.008681] vdd_cam_1v8_reg: disabling [ 3.016245] Waiting for root device /dev/mmcblk0p1... [ 3.225264] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 4.204133] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f [ 49.325225] random: nonblocking pool is initialized
[PYBOOT] [dalmore 02:01]: Timed out waiting for "<type 'str'>":
[PYBOOT] [dalmore 02:02]: got exception: timeout ~$off
[PYBOOT] [dalmore 02:03]: Done. Board dalmore-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 2.492635] Key type dns_resolver registered [ 2.499056] ThumbEE CPU extension supported. [ 2.503477] Registering SWP/SWPB emulation handler [ 2.529371] vdd-sys-5v0: supplied by vdd_ac_bat [ 2.535365] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 2.546364] vdd_hdmi_5v0: supplied by vdd-sys-5v0 [ 2.562462] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.569213] [drm] No driver support for vblank timestamp query. [ 2.589345] mmc1: new high speed MMC card at address 0001 [ 2.599226] mmcblk1: mmc1:0001 SEM32G 29.1 GiB [ 2.607370] mmcblk1boot0: mmc1:0001 SEM32G partition 1 4.00 MiB [ 2.616343] mmcblk1boot1: mmc1:0001 SEM32G partition 2 4.00 MiB [ 2.624707] mmcblk1rpmb: mmc1:0001 SEM32G partition 3 4.00 MiB [ 2.636326] mmcblk1: p1 [ 2.748338] Console: switching to colour frame buffer device 240x75 [ 2.836042] drm drm: fb0: frame buffer device [ 2.854838] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 2.864902] usb2_vbus: supplied by vdd-sys-5v0 [ 2.876412] tegra-ehci 7d008000.usb: EHCI Host Controller [ 2.882004] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 2.890868] tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 [ 2.904855] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 2.915134] hub 1-0:1.0: USB hub found [ 2.919139] hub 1-0:1.0: 1 port detected [ 2.929273] input: gpio-keys as /devices/soc0/gpio-keys/input/input0 [ 2.943169] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 3.005321] dvdd_ts: disabling [ 3.008420] usb1_vbus: disabling [ 3.011788] vdd_cam_1v8_reg: disabling [ 3.019206] Waiting for root device /dev/mmcblk0p1... [ 3.229860] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 4.208153] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f [ 49.155370] random: nonblocking pool is initialized
[PYBOOT] [dalmore 01:53]: Timed out waiting for "<type 'str'>":
[PYBOOT] [dalmore 01:54]: got exception: timeout ~$off
[PYBOOT] [dalmore 01:55]: Done. Board dalmore-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
[ 2.036964] can: broadcast manager protocol (rev 20120528 t) [ 2.042717] can: netlink gateway (rev 20130117) max_hops=1 [ 2.049394] Key type dns_resolver registered [ 2.054510] ThumbEE CPU extension supported. [ 2.086447] vdd-sys-5v0: supplied by vdd_ac_bat [ 2.091388] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 2.101479] vdd_hdmi_5v0: supplied by vdd-sys-5v0 [ 2.124655] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.131338] [drm] No driver support for vblank timestamp query. [ 2.294937] Console: switching to colour frame buffer device 240x75 [ 2.382875] drm drm: fb0: frame buffer device [ 2.387607] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 2.395809] usb2_vbus: supplied by vdd-sys-5v0 [ 2.403435] tegra-ehci 7d008000.usb: EHCI Host Controller [ 2.408992] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 2.416887] mmc1: new high speed MMC card at address 0001 [ 2.423545] mmcblk1: mmc1:0001 SEM32G 29.1 GiB [ 2.428573] mmcblk1boot0: mmc1:0001 SEM32G partition 1 4.00 MiB [ 2.435363] tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 [ 2.441442] mmcblk1boot1: mmc1:0001 SEM32G partition 2 4.00 MiB [ 2.447846] mmcblk1rpmb: mmc1:0001 SEM32G partition 3 4.00 MiB [ 2.454606] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 2.461738] mmcblk1: p1 [ 2.466681] hub 1-0:1.0: USB hub found [ 2.473666] hub 1-0:1.0: 1 port detected [ 2.483293] input: gpio-keys as /devices/soc0/gpio-keys/input/input0 [ 2.494651] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 2.527336] dvdd_ts: disabling [ 2.530533] usb1_vbus: disabling [ 2.533777] vdd_cam_1v8_reg: disabling [ 2.539237] Waiting for root device /dev/mmcblk0p1... [ 2.790237] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 3.741030] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f
[PYBOOT] [dalmore 01:48]: Timed out waiting for "<type 'str'>":
[PYBOOT] [dalmore 01:49]: got exception: timeout ~$off
[PYBOOT] [dalmore 01:50]: Done. Board dalmore-arm-tegra_defconfig failure log: -------------------------------------------------
[ 2.669138] Bluetooth: RFCOMM ver 1.11 [ 2.673086] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 2.678485] Bluetooth: BNEP socket layer initialized [ 2.683576] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 2.689577] Bluetooth: HIDP socket layer initialized [ 2.696537] Key type dns_resolver registered [ 2.706146] Registering SWP/SWPB emulation handler [ 2.736108] vdd-sys-5v0: supplied by vdd_ac_bat [ 2.743360] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 2.754184] vdd_hdmi_5v0: supplied by vdd-sys-5v0 [ 2.778076] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.785014] [drm] No driver support for vblank timestamp query. [ 2.962359] Console: switching to colour frame buffer device 240x75 [ 3.048841] drm drm: fb0: frame buffer device [ 3.081259] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.088456] usb2_vbus: supplied by vdd-sys-5v0 [ 3.097772] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.103586] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 3.112663] tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 [ 3.131178] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 3.145316] hub 1-0:1.0: USB hub found [ 3.149355] hub 1-0:1.0: 1 port detected [ 3.163760] input: gpio-keys as /devices/soc0/gpio-keys/input/input1 [ 3.178099] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:01 UTC (946684801) [ 3.265249] dvdd_ts: disabling [ 3.268353] usb1_vbus: disabling [ 3.271731] vdd_cam_1v8_reg: disabling [ 3.276412] ALSA device list: [ 3.279402] #0: NVIDIA Tegra Dalmore [ 3.285295] Waiting for root device /dev/mmcblk0p1... [ 3.471181] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 4.506099] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f [ 63.061152] random: nonblocking pool is initialized
[PYBOOT] [dalmore 01:47]: Timed out waiting for "<type 'str'>":
[PYBOOT] [dalmore 01:48]: got exception: timeout ~$off
[PYBOOT] [dalmore 01:49]: Done. Board odroidu3-arm-exynos_defconfig failure log: -------------------------------------------------
[ 1.650439] dwmmc_exynos 12550000.mmc: DW MMC controller at irq 107,32 bit host data width,128 deep fifo [ 1.658000] usb 1-3: new high-speed USB device number 2 using exynos-ehci [ 1.666906] dwmmc_exynos 12550000.mmc: allocated mmc-pwrseq [ 1.698041] dwmmc_exynos 12550000.mmc: 1 slots initialized [ 1.699306] usbcore: registered new interface driver usbhid [ 1.704458] usbhid: USB HID core driver [ 1.713263] NET: Registered protocol family 10 [ 1.713875] sit: IPv6 over IPv4 tunneling driver [ 1.717109] NET: Registered protocol family 17 [ 1.721125] NET: Registered protocol family 15 [ 1.725595] Key type dns_resolver registered [ 1.729909] Registering SWP/SWPB emulation handler [ 1.735750] s3c-rtc 10070000.rtc: rtc disabled, re-enabling [ 1.740320] s3c-rtc 10070000.rtc: rtc core: registered s3c as rtc1 [ 1.766760] mmc_host mmc1: Bus speed (slot 0) = 44000000Hz (slot req 52000000Hz, actual 44000000HZ div = 0) [ 1.768559] max98090 1-0010: MAX98090 REVID=0x43 [ 1.770775] max98090 1-0010: use default 2.8v micbias [ 1.780748] mmc_host mmc1: Bus speed (slot 0) = 73333333Hz (slot req 52000000Hz, actual 36666666HZ div = 1) [ 1.790587] mmc1: new DDR MMC card at address 0001 [ 1.793688] asoc-simple-card sound: HiFi <-> 3830000.i2s mapping ok [ 1.796747] input: gpio_keys as /devices/platform/gpio_keys/input/input0 [ 1.808514] mmcblk1: mmc1:0001 008G92 7.28 GiB [ 1.812703] mmcblk1boot0: mmc1:0001 008G92 partition 1 4.00 MiB [ 1.818540] mmcblk1boot1: mmc1:0001 008G92 partition 2 4.00 MiB [ 1.824444] mmcblk1rpmb: mmc1:0001 008G92 partition 3 512 KiB [ 1.830995] mmcblk1: p1 p2 [ 1.840881] max77686-rtc max77686-rtc: setting system clock to 2000-01-01 01:00:19 UTC (946688419) [ 1.860949] VDD10_HDMI_1.0V: disabling [ 1.861642] vdd_g3d: disabling [ 1.862715] BUCK8_2.8V: disabling [ 1.866714] ALSA device list: [ 1.868363] #0: Odroid-U3 [ 1.872013] Waiting for root device /dev/mmcblk0p2...
[PYBOOT] [odroidu3 02:03]: Timed out waiting for "<type 'str'>":
[PYBOOT] [odroidu3 02:04]: got exception: timeout ~$off
[PYBOOT] [odroidu3 02:05]: Done. Board omap5uevm-arm-multi_lpae_defconfig failure log: -------------------------------------------------
[ 3.264962] [<c0b4f2d4>] (__schedule) from [<c0b4f58c>] (schedule+0x44/0x9c) [ 3.272349] [<c0b4f58c>] (schedule) from [<c03448b4>] (do_exit+0x680/0xa24) [ 3.279638] [<c03448b4>] (do_exit) from [<c030bf4c>] (die+0x46c/0x484) [ 3.286471] [<c030bf4c>] (die) from [<c031ca78>] (__do_kernel_fault.part.0+0x64/0x1e4) [ 3.294761] [<c031ca78>] (__do_kernel_fault.part.0) from [<c0317c9c>] (do_page_fault+0x36c/0x378) [ 3.304056] [<c0317c9c>] (do_page_fault) from [<c03012a0>] (do_DataAbort+0x38/0xb4) [ 3.312065] [<c03012a0>] (do_DataAbort) from [<c030c5e0>] (__dabt_svc+0x40/0x60) [ 3.319799] Exception stack(0xee605cb8 to 0xee605d00) [ 3.325085] 5ca0: 058c1550 00002cfc [ 3.333650] 5cc0: e58dc000 e28dd00c 058c1550 00000074 20000013 00000074 c200c10c 00000000 [ 3.342212] 5ce0: c0f42700 00000000 00000000 ee605d08 c09ea008 c09ea010 20000093 ffffffff [ 3.350775] [<c030c5e0>] (__dabt_svc) from [<c09ea010>] (of_find_node_by_phandle+0x44/0x68) [ 3.359519] [<c09ea010>] (of_find_node_by_phandle) from [<c09ea17c>] (__of_parse_phandle_with_args+0x148/0x224) [ 3.370091] [<c09ea17c>] (__of_parse_phandle_with_args) from [<c09ea36c>] (of_parse_phandle_with_args+0x24/0x34) [ 3.380739] [<c09ea36c>] (of_parse_phandle_with_args) from [<c09f8a84>] (__of_clk_get_by_name+0x9c/0x108) [ 3.390754] [<c09f8a84>] (__of_clk_get_by_name) from [<c09f8b38>] (clk_get+0x2c/0x5c) [ 3.398952] [<c09f8b38>] (clk_get) from [<c09a7fa4>] (mmc_pwrseq_simple_alloc+0x38/0xc0) [ 3.407431] [<c09a7fa4>] (mmc_pwrseq_simple_alloc) from [<c09a7d28>] (mmc_pwrseq_alloc+0x98/0xc4) [ 3.416722] [<c09a7d28>] (mmc_pwrseq_alloc) from [<c099e15c>] (mmc_of_parse+0x468/0x580) [ 3.425191] [<c099e15c>] (mmc_of_parse) from [<c09ba4e4>] (omap_hsmmc_probe+0x17c/0xa44) [ 3.433666] [<c09ba4e4>] (omap_hsmmc_probe) from [<c077accc>] (platform_drv_probe+0x4c/0xb0) [ 3.442505] [<c077accc>] (platform_drv_probe) from [<c07793f4>] (driver_probe_device+0x214/0x2c0) [ 3.451797] [<c07793f4>] (driver_probe_device) from [<c07777fc>] (bus_for_each_drv+0x64/0x98) [ 3.460719] [<c07777fc>] (bus_for_each_drv) from [<c0779104>] (__device_attach+0xb0/0x110) [ 3.469371] [<c0779104>] (__device_attach) from [<c0778740>] (bus_probe_device+0x84/0x8c) [ 3.477935] [<c0778740>] (bus_probe_device) from [<c0778bd0>] (deferred_probe_work_func+0x68/0x98) [ 3.487313] [<c0778bd0>] (deferred_probe_work_func) from [<c0357884>] (process_one_work+0x138/0x348) [ 3.496879] [<c0357884>] (process_one_work) from [<c0357acc>] (worker_thread+0x38/0x510) [ 3.505347] [<c0357acc>] (worker_thread) from [<c035cd74>] (kthread+0xdc/0xf4) [ 3.512914] [<c035cd74>] (kthread) from [<c0307eb8>] (ret_from_fork+0x14/0x3c) [ 3.520478] Code: e083310c e0431101 eaffff8f e59032f8 (e5130014) [ 3.526856] ---[ end trace d103bdcd3477d76d ]--- [ 3.531685] Fixing recursive fault but reboot is needed!
[PYBOOT] [omap5uevm 02:08]: Timed out waiting for "<type 'str'>":
[PYBOOT] [omap5uevm 02:09]: got exception: timeout ~$off
[PYBOOT] [omap5uevm 02:10]: Done. Board omap5uevm-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 3.497356] [<c0b4f2d4>] (__schedule) from [<c0b4f58c>] (schedule+0x44/0x9c) [ 3.504739] [<c0b4f58c>] (schedule) from [<c03448b4>] (do_exit+0x680/0xa24) [ 3.512032] [<c03448b4>] (do_exit) from [<c030bf4c>] (die+0x46c/0x484) [ 3.518859] [<c030bf4c>] (die) from [<c031ca78>] (__do_kernel_fault.part.0+0x64/0x1e4) [ 3.527151] [<c031ca78>] (__do_kernel_fault.part.0) from [<c0317c9c>] (do_page_fault+0x36c/0x378) [ 3.536433] [<c0317c9c>] (do_page_fault) from [<c03012a0>] (do_DataAbort+0x38/0xb4) [ 3.544448] [<c03012a0>] (do_DataAbort) from [<c030c5e0>] (__dabt_svc+0x40/0x60) [ 3.552189] Exception stack(0xee087cb8 to 0xee087d00) [ 3.557468] 7ca0: 0d881550 00002cfc [ 3.566022] 7cc0: e58dc000 e28dd00c 0d881550 00000074 20000013 00000074 c200c10c 00000000 [ 3.574580] 7ce0: c0f42700 00000000 00000000 ee087d08 c09ea008 c09ea010 20000093 ffffffff [ 3.583141] [<c030c5e0>] (__dabt_svc) from [<c09ea010>] (of_find_node_by_phandle+0x44/0x68) [ 3.591892] [<c09ea010>] (of_find_node_by_phandle) from [<c09ea17c>] (__of_parse_phandle_with_args+0x148/0x224) [ 3.602452] [<c09ea17c>] (__of_parse_phandle_with_args) from [<c09ea36c>] (of_parse_phandle_with_args+0x24/0x34) [ 3.613113] [<c09ea36c>] (of_parse_phandle_with_args) from [<c09f8a84>] (__of_clk_get_by_name+0x9c/0x108) [ 3.623136] [<c09f8a84>] (__of_clk_get_by_name) from [<c09f8b38>] (clk_get+0x2c/0x5c) [ 3.631330] [<c09f8b38>] (clk_get) from [<c09a7fa4>] (mmc_pwrseq_simple_alloc+0x38/0xc0) [ 3.639793] [<c09a7fa4>] (mmc_pwrseq_simple_alloc) from [<c09a7d28>] (mmc_pwrseq_alloc+0x98/0xc4) [ 3.649077] [<c09a7d28>] (mmc_pwrseq_alloc) from [<c099e15c>] (mmc_of_parse+0x468/0x580) [ 3.657551] [<c099e15c>] (mmc_of_parse) from [<c09ba4e4>] (omap_hsmmc_probe+0x17c/0xa44) [ 3.666025] [<c09ba4e4>] (omap_hsmmc_probe) from [<c077accc>] (platform_drv_probe+0x4c/0xb0) [ 3.674868] [<c077accc>] (platform_drv_probe) from [<c07793f4>] (driver_probe_device+0x214/0x2c0) [ 3.684161] [<c07793f4>] (driver_probe_device) from [<c07777fc>] (bus_for_each_drv+0x64/0x98) [ 3.693089] [<c07777fc>] (bus_for_each_drv) from [<c0779104>] (__device_attach+0xb0/0x110) [ 3.701748] [<c0779104>] (__device_attach) from [<c0778740>] (bus_probe_device+0x84/0x8c) [ 3.710314] [<c0778740>] (bus_probe_device) from [<c0778bd0>] (deferred_probe_work_func+0x68/0x98) [ 3.719687] [<c0778bd0>] (deferred_probe_work_func) from [<c0357884>] (process_one_work+0x138/0x348) [ 3.729253] [<c0357884>] (process_one_work) from [<c0357acc>] (worker_thread+0x38/0x510) [ 3.737726] [<c0357acc>] (worker_thread) from [<c035cd74>] (kthread+0xdc/0xf4) [ 3.745285] [<c035cd74>] (kthread) from [<c0307eb8>] (ret_from_fork+0x14/0x3c) [ 3.752845] Code: e083310c e0431101 eaffff8f e59032f8 (e5130014) [ 3.759216] ---[ end trace cea758b7f335e160 ]--- [ 3.764048] Fixing recursive fault but reboot is needed!
[PYBOOT] [omap5uevm 02:10]: Timed out waiting for "<type 'str'>":
[PYBOOT] [omap5uevm 02:11]: got exception: timeout ~$off
[PYBOOT] [omap5uevm 02:12]: Done. Board omap5uevm-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
[ 48.742472] ac80: ee482200 ee482200 ffffffff 00000000 00000000 ee482200 c1035a18 ee48242c [ 48.751032] aca0: c0a8af64 00000001 c1007760 ee4fad04 ee483338 ee4facd0 c0349540 c034d878 [ 48.759597] acc0: 20000193 ffffffff [ 48.763239] [<c030bea0>] (__dabt_svc) from [<c034d878>] (kthread_data+0x4/0xc) [ 48.770801] [<c034d878>] (kthread_data) from [<c0349540>] (wq_worker_sleeping+0x8/0xb0) [ 48.779191] [<c0349540>] (wq_worker_sleeping) from [<c0a8ad80>] (__schedule+0x2bc/0x45c) [ 48.787661] [<c0a8ad80>] (__schedule) from [<c0a8af64>] (schedule+0x44/0x9c) [ 48.795043] [<c0a8af64>] (schedule) from [<c0337480>] (do_exit+0x7c4/0x938) [ 48.802335] [<c0337480>] (do_exit) from [<c030b7e8>] (die+0x370/0x3d8) [ 48.809166] [<c030b7e8>] (die) from [<c031a0f8>] (__do_kernel_fault.part.0+0x64/0x1e4) [ 48.817457] [<c031a0f8>] (__do_kernel_fault.part.0) from [<c03156e8>] (do_page_fault+0x36c/0x378) [ 48.826745] [<c03156e8>] (do_page_fault) from [<c0301238>] (do_DataAbort+0x38/0xb4) [ 48.834760] [<c0301238>] (do_DataAbort) from [<c030bea0>] (__dabt_svc+0x40/0x60) [ 48.842501] Exception stack(0xee4faeb8 to 0xee4faf00) [ 48.847782] aea0: ee482200 ee482200 [ 48.856338] aec0: ffffffff 00000000 00000000 ee482200 c1035a18 ee48242c c0a8af64 00000001 [ 48.864901] aee0: c1007760 ee4faf3c ee483338 ee4faf08 c0349540 c034d878 20000193 ffffffff [ 48.873459] [<c030bea0>] (__dabt_svc) from [<c034d878>] (kthread_data+0x4/0xc) [ 48.881020] [<c034d878>] (kthread_data) from [<c0349540>] (wq_worker_sleeping+0x8/0xb0) [ 48.889402] [<c0349540>] (wq_worker_sleeping) from [<c0a8ad80>] (__schedule+0x2bc/0x45c) [ 48.897875] [<c0a8ad80>] (__schedule) from [<c0a8af64>] (schedule+0x44/0x9c) [ 48.905256] [<c0a8af64>] (schedule) from [<c0337480>] (do_exit+0x7c4/0x938) [ 48.912545] [<c0337480>] (do_exit) from [<c030b7e8>] (die+0x370/0x3d8) [ 48.919378] [<c030b7e8>] (die) from [<c031a0f8>] (__do_kernel_fault.part.0+0x64/0x1e4) [ 48.927665] [<c031a0f8>] (__do_kernel_fault.part.0) from [<c03156e8>] (do_page_fault+0x36c/0x378) [ 48.936953] [<c03156e8>] (do_page_fault) from [<c0301238>] (do_DataAbort+0x38/0xb4) [ 48.944966] [<c0301238>] (do_DataAbort) from [<c030bea0>] (__dabt_svc+0x40/0x60) [ 48.952711] Exception stack(0xee4fb0f0 to 0xee4fb138) [ 48.957994] b0e0: ee482200 ee482200 ffffffff 00000000 [ 48.966546] b100: 00000000 ee482200 c1035a18 ee48242c c0a8af64 00000001 c1007760 ee4fb174 [ 48.975106] b120: ee483338 ee4fb140 c0349540 c034d878 20000193 ffffffff [ 48.982029] [<c030bea0>] (__dabt_svc) from [<c034d878>] (kthread_data+0x4/0xc) [ 48.989589] [<c034d878>] (kthread_data) from [<c0349540>] (wq_worker_sleeping+0x8/0xb0) [ 48.997963] [<c0349540>] (wq_worker_sleeping) from [<c0a8ad80>] (__schedule+0x2bc/0x45c) [ 49.006433] [<c0a8ad80>] (__schedule) from [<c0a8af64>] (schedule+0x44/0x9c) [ 49.013817] [<c0a [PYBOOT] [omap5uevm 01:45]: got exception: panic ~$off
[PYBOOT] [omap5uevm 01:47]: Done. Board seaboard-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.652938] vdd_ldo7,avdd_hdmi,vdd_fuse: supplied by vdd_sm2,vin_ldo* [ 1.665534] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 1.672031] tegra-ehci c5000000.usb: EHCI Host Controller [ 1.677485] tegra-ehci c5000000.usb: new USB bus registered, assigned bus number 3 [ 1.685383] tegra-ehci c5000000.usb: irq 287, io mem 0xc5000000 [ 1.699796] tegra-ehci c5000000.usb: USB 2.0 started, EHCI 1.00 [ 1.706798] hub 3-0:1.0: USB hub found [ 1.710901] hub 3-0:1.0: 1 port detected [ 1.721750] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.728391] [drm] No driver support for vblank timestamp query. [ 1.735314] mmc2: switch to bus width 8 failed [ 1.740051] mmc2: switch to bus width 4 failed [ 1.740263] mmc0: queuing unknown CIS tuple 0x80 (50 bytes) [ 1.748200] mmc0: queuing unknown CIS tuple 0x80 (7 bytes) [ 1.751042] mmc0: queuing unknown CIS tuple 0x80 (7 bytes) [ 1.761138] mmc2: new high speed MMC card at address 0001 [ 1.769186] mmcblk2: mmc2:0001 MMC08G 7.46 GiB [ 1.774226] mmcblk2boot0: mmc2:0001 MMC08G partition 1 512 KiB [ 1.780546] mmcblk2boot1: mmc2:0001 MMC08G partition 2 512 KiB [ 1.783689] mmc0: queuing unknown CIS tuple 0x80 (19 bytes) [ 1.793675] mmcblk2: p3 [ 1.803235] mmc0: queuing unknown CIS tuple 0x02 (1 bytes) [ 1.807786] mmc0: new SDIO card at address 0001 [ 1.838210] Console: switching to colour frame buffer device 170x48 [ 1.873891] drm drm: fb0: frame buffer device [ 1.888777] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 1.895620] input: gpio-keys as /devices/soc0/gpio-keys/input/input2 [ 1.902722] tps6586x-rtc tps6586x-rtc: setting system clock to 2009-01-01 00:00:00 UTC (1230768000) [ 1.917094] vdd_1v5: disabling [ 1.920178] vdd_1v2: disabling [ 2.553576] asix 2-1:1.0 eth0: register 'asix' at usb-c5008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, c0:c1:c0:13:08:60 [ 2.564997] Waiting for root device /dev/mmcblk0p3... [ 58.848861] random: nonblocking pool is initialized
[PYBOOT] [seaboard 02:10]: Timed out waiting for "<type 'str'>":
[PYBOOT] [seaboard 02:11]: got exception: timeout ~$off
[PYBOOT] [seaboard 02:12]: Done. Board seaboard-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
[ 1.612099] vdd_ldo8,avdd_hdmi_pll: supplied by vdd_sm2,vin_ldo* [ 1.618429] vdd_ldo7,avdd_hdmi,vdd_fuse: supplied by vdd_sm2,vin_ldo* [ 1.628337] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 1.634785] tegra-ehci c5000000.usb: EHCI Host Controller [ 1.640196] tegra-ehci c5000000.usb: new USB bus registered, assigned bus number 3 [ 1.647949] tegra-ehci c5000000.usb: irq 287, io mem 0xc5000000 [ 1.663219] tegra-ehci c5000000.usb: USB 2.0 started, EHCI 1.00 [ 1.669694] hub 3-0:1.0: USB hub found [ 1.673500] hub 3-0:1.0: 1 port detected [ 1.683912] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.690541] [drm] No driver support for vblank timestamp query. [ 1.716614] mmc2: switch to bus width 8 failed [ 1.716872] mmc2: switch to bus width 4 failed [ 1.716881] mmc2: new high speed MMC card at address 0001 [ 1.717205] mmcblk2: mmc2:0001 MMC08G 7.46 GiB [ 1.717327] mmcblk2boot0: mmc2:0001 MMC08G partition 1 512 KiB [ 1.717467] mmcblk2boot1: mmc2:0001 MMC08G partition 2 512 KiB [ 1.718574] mmcblk2: p3 [ 1.722130] mmc0: queuing unknown CIS tuple 0x80 (50 bytes) [ 1.729720] mmc0: queuing unknown CIS tuple 0x80 (7 bytes) [ 1.732448] mmc0: queuing unknown CIS tuple 0x80 (7 bytes) [ 1.739427] mmc0: queuing unknown CIS tuple 0x80 (19 bytes) [ 1.752352] Console: switching to colour frame buffer device 170x48 [ 1.825671] drm drm: fb0: frame buffer device [ 1.830149] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 1.836555] input: gpio-keys as /devices/soc0/gpio-keys/input/input2 [ 1.843429] tps6586x-rtc tps6586x-rtc: setting system clock to 2009-01-01 00:00:00 UTC (1230768000) [ 1.855098] vdd_1v5: disabling [ 1.858164] vdd_1v2: disabling [ 1.872803] mmc0: queuing unknown CIS tuple 0x02 (1 bytes) [ 1.881298] mmc0: new SDIO card at address 0001 [ 2.521802] asix 2-1:1.0 eth0: register 'asix' at usb-c5008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, c0:c1:c0:13:08:60 [ 2.532648] Waiting for root device /dev/mmcblk0p3...
[PYBOOT] [seaboard 01:48]: Timed out waiting for "<type 'str'>":
[PYBOOT] [seaboard 01:49]: got exception: timeout ~$off
[PYBOOT] [seaboard 01:50]: Done. Board seaboard-arm-tegra_defconfig failure log: -------------------------------------------------
[ 1.638996] Bluetooth: BNEP socket layer initialized [ 1.644042] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 1.650076] Bluetooth: HIDP socket layer initialized [ 1.655787] Key type dns_resolver registered [ 1.660111] mmc0: queuing unknown CIS tuple 0x02 (1 bytes) [ 1.670533] mmc0: new SDIO card at address 0001 [ 1.677997] Registering SWP/SWPB emulation handler [ 1.693225] tegra-dc 54200000.dc: failed to probe RGB output: -517 [ 1.699946] VDDIO_HDMI: supplied by vdd_5v0 [ 1.704460] vdd_sys: supplied by vdd_5v0 [ 1.708469] vdd_sm2,vin_ldo*: supplied by vdd_sys [ 1.713497] vdd_ldo8,avdd_hdmi_pll: supplied by vdd_sm2,vin_ldo* [ 1.720077] vdd_ldo7,avdd_hdmi,vdd_fuse: supplied by vdd_sm2,vin_ldo* [ 1.730221] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 1.736672] tegra-ehci c5000000.usb: EHCI Host Controller [ 1.742114] tegra-ehci c5000000.usb: new USB bus registered, assigned bus number 3 [ 1.750003] tegra-ehci c5000000.usb: irq 287, io mem 0xc5000000 [ 1.770057] tegra-ehci c5000000.usb: USB 2.0 started, EHCI 1.00 [ 1.777921] hub 3-0:1.0: USB hub found [ 1.781741] hub 3-0:1.0: 1 port detected [ 1.791946] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.798562] [drm] No driver support for vblank timestamp query. [ 1.896448] Console: switching to colour frame buffer device 170x48 [ 1.913958] drm drm: fb0: frame buffer device [ 1.940060] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 1.947040] input: gpio-keys as /devices/soc0/gpio-keys/input/input4 [ 1.954826] tps6586x-rtc tps6586x-rtc: setting system clock to 2009-01-01 00:00:00 UTC (1230768000) [ 1.972619] vdd_1v5: disabling [ 1.975680] vdd_1v2: disabling [ 1.978835] ALSA device list: [ 1.981818] #0: NVIDIA Tegra Seaboard [ 2.317858] asix 2-1:1.0 eth0: register 'asix' at usb-c5008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, c0:c1:c0:13:08:60 [ 2.328951] Waiting for root device /dev/mmcblk0p3...
[PYBOOT] [seaboard 01:47]: Timed out waiting for "<type 'str'>":
[PYBOOT] [seaboard 01:48]: got exception: timeout ~$off
[PYBOOT] [seaboard 01:49]: Done. Board snow-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
[....] Waiting for /dev to be fully populated...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Activating swap...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [ 3.196451] EXT4-fs (mmcblk0p3): warning: mounting fs with errors, running e2fsck is recommended [ 3.204807] EXT4-fs (mmcblk0p3): re-mounted. Opts: (null) [....] Cleaning up temporary files... /tmp[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] Activating lvm and md swap...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Checking file systems...fsck from util-linux 2.20.1 [?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Mounting local filesystems...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Activating swapfile swap...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Cleaning up temporary files...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] Setting kernel variables ...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [ 4.262600] random: dd urandom read with 57 bits of entropy available [....] Configuring network interfaces...Internet Systems Consortium DHCP Client 4.2.2 Copyright 2004-2011 Internet Systems Consortium. All rights reserved. For info, please visit https://www.isc.org/software/dhcp/
Cannot find device "eth0" Bind socket to interface: No such device Failed to bring up eth0. [?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Cleaning up temporary files...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. INIT: Entering runlevel: 2 [[36minfo[39;49m] Using makefile-style concurrent boot in runlevel 2. [....] Starting enhanced syslogd: rsyslogd[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] Starting web server: apache2apache2: Could not reliably determine the server's fully qualified domain name, using 127.0.0.1 for ServerName [?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] Starting periodic command scheduler: cron[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] Starting system message bus: dbus[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] Loading cpufreq kernel modules...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone (none). [....] CPUFreq Utilities: Setting ondemand CPUFreq governor...CPU0...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Starting OpenBSD Secure Shell server: sshd[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c.
[PYBOOT] [snow 03:10]: Timed out waiting for "<type 'str'>":
[PYBOOT] [snow 03:11]: got exception: timeout ~$off
[PYBOOT] [snow 03:13]: Done. Board snowball-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.959136] can: controller area network core (rev 20120528 abi 9) [ 1.965393] NET: Registered protocol family 29 [ 1.969848] can: raw protocol (rev 20120528) [ 1.974151] can: broadcast manager protocol (rev 20120528 t) [ 1.979797] can: netlink gateway (rev 20130117) max_hops=1 [ 1.985809] Key type dns_resolver registered [ 1.990325] ThumbEE CPU extension supported. [ 1.994628] Registering SWP/SWPB emulation handler [ 2.005432] input: gpio_keys as /devices/soc0/gpio_keys/input/input0 [ 2.012298] rtc-pl031 80154000.rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 2.021514] thermal cooling_device0: thermal-cpufreq-0 bind to 0: 0-succeed [ 2.028533] thermal cooling_device0: thermal-cpufreq-0 bind to 1: 0-succeed [ 2.035522] thermal cooling_device0: thermal-cpufreq-0 bind to 2: 0-succeed [ 2.042541] db8500-cpufreq-cooling soc:cpufreq-cooling: Cooling device registered: thermal-cpufreq-0 [ 2.056518] db8500-esram12: disabling [ 2.060272] db8500-esram34: disabling [ 2.064331] V-CSI/DSI: disabling [ 2.067596] mmci-reg: disabling [ 2.071350] uart-pl011 80007000.uart: DMA channel TX dma0chan20 [ 2.077331] uart-pl011 80007000.uart: DMA channel RX dma0chan21 [ 2.083801] Waiting for root device /dev/mmcblk0p4... [ 2.118957] mmc3: new high speed MMC card at address 0001 [ 2.124938] mmcblk3: mmc3:0001 3.53 GiB [ 2.129180] mmcblk3boot0: mmc3:0001 partition 1 2.00 MiB [ 2.134826] mmcblk3boot1: mmc3:0001 partition 2 2.00 MiB [ 2.140472] mmcblk3rpmb: mmc3:0001 partition 3 128 KiB [ 2.146972] mmcblk3: p1 p2 p3 p4 Connected. cu: Got hangup signal cu: waitpid: No child processes Connected.
Disconnected.
[PYBOOT] [snowball 02:15]: Timed out waiting for "<type 'str'>":
[PYBOOT] [snowball 02:16]: got exception: timeout ~$off
[PYBOOT] [snowball 02:17]: Done. Board snowball-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
[ 1.897918] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.905456] ledtrig-cpu: registered to indicate activity on CPUs [ 1.911682] usbcore: registered new interface driver usbhid [ 1.917266] usbhid: USB HID core driver [ 1.924499] NET: Registered protocol family 10 [ 1.979827] sit: IPv6 over IPv4 tunneling driver [ 1.984985] NET: Registered protocol family 17 [ 1.989471] can: controller area network core (rev 20120528 abi 9) [ 1.995697] NET: Registered protocol family 29 [ 2.000152] can: raw protocol (rev 20120528) [ 2.004425] can: broadcast manager protocol (rev 20120528 t) [ 2.010070] can: netlink gateway (rev 20130117) max_hops=1 [ 2.016021] Key type dns_resolver registered [ 2.020477] ThumbEE CPU extension supported. [ 2.074798] input: gpio_keys as /devices/soc0/gpio_keys/input/input0 [ 2.089477] rtc-pl031 80154000.rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 2.098571] thermal cooling_device0: thermal-cpufreq-0 bind to 0: 0-succeed [ 2.105590] thermal cooling_device0: thermal-cpufreq-0 bind to 1: 0-succeed [ 2.112548] thermal cooling_device0: thermal-cpufreq-0 bind to 2: 0-succeed [ 2.119537] db8500-cpufreq-cooling soc:cpufreq-cooling: Cooling device registered: thermal-cpufreq-0 [ 2.131317] db8500-esram12: disabling [ 2.179107] db8500-esram34: disabling [ 2.203826] V-CSI/DSI: disabling [ 2.208068] mmci-reg: disabling [ 2.219696] uart-pl011 80007000.uart: DMA channel TX dma0chan20 [ 2.225646] uart-pl011 80007000.uart: DMA channel RX dma0chan21 [ 2.239807] Waiting for root device /dev/mmcblk0p4... [ 3.032806] mmc3: new high speed MMC card at address 0001 [ 3.044616] mmcblk3: mmc3:0001 3.53 GiB [ 3.054748] mmcblk3boot0: mmc3:0001 partition 1 2.00 MiB [ 3.064270] mmcblk3boot1: mmc3:0001 partition 2 2.00 MiB [ 3.078796] mmcblk3rpmb: mmc3:0001 partition 3 128 KiB [ 3.090606] mmcblk3: p1 p2 p3 p4
[PYBOOT] [snowball 02:00]: Timed out waiting for "<type 'str'>":
[PYBOOT] [snowball 02:01]: got exception: timeout ~$off
[PYBOOT] [snowball 02:02]: Done. Board snowball-arm-u8500_defconfig failure log: -------------------------------------------------
[ 2.726837] ux500-msp-i2s ux500-msp-i2s.1: Failed to get DMA channel capabilities, falling back to period counting: -6 [ 2.737884] snd-soc-mop500 snd-soc-mop500.0: ab8500-codec-dai.0 <-> ux500-msp-i2s.1 mapping ok [ 2.753723] ux500-msp-i2s ux500-msp-i2s.3: Failed to get DMA channel capabilities, falling back to period counting: -6 [ 2.764587] snd-soc-mop500 snd-soc-mop500.0: ab8500-codec-dai.1 <-> ux500-msp-i2s.3 mapping ok [ 2.801910] NET: Registered protocol family 10 [ 2.809417] sit: IPv6 over IPv4 tunneling driver [ 2.817016] NET: Registered protocol family 17 [ 2.822082] NET: Registered protocol family 35 [ 2.826843] NET: Registered protocol family 37 [ 2.831939] Registering SWP/SWPB emulation handler [ 2.839752] coresight-etm3x 801ae000.ptm: PTM 1.0 initialized [ 2.846069] coresight-etm3x 801af000.ptm: PTM 1.0 initialized [ 2.852752] input: gpio_keys as /devices/soc0/gpio_keys/input/input1 [ 2.859832] ab8500-rtc ab8500-rtc.0: setting system clock to 2000-04-12 00:58:55 UTC (955501135) [ 2.869140] thermal cooling_device0: thermal-cpufreq-0 bind to 0: 0-succeed [ 2.880004] thermal cooling_device0: thermal-cpufreq-0 bind to 1: 0-succeed [ 2.886993] thermal cooling_device0: thermal-cpufreq-0 bind to 2: 0-succeed [ 2.893981] db8500-cpufreq-cooling soc:cpufreq-cooling: Cooling device registered: thermal-cpufreq-0 [ 2.908355] db8500-esram12: disabling [ 2.912200] db8500-esram34: disabling [ 2.916137] V-CSI/DSI: disabling [ 2.919403] mmci-reg: disabling [ 2.922760] ALSA device list: [ 2.925720] #0: MOP500-card [ 2.929107] uart-pl011 80007000.uart: DMA channel TX dma0chan24 [ 2.935119] uart-pl011 80007000.uart: DMA channel RX dma0chan25 [ 2.941375] Waiting for root device /dev/mmcblk0p4... Connected. cu: Got hangup signal cu: waitpid: No child processes Connected.
Disconnected.
[PYBOOT] [snowball 01:54]: Timed out waiting for "<type 'str'>":
[PYBOOT] [snowball 01:55]: got exception: timeout ~$off
[PYBOOT] [snowball 01:56]: Done. Board wandboard-arm-imx_v6_v7_defconfig failure log: -------------------------------------------------
[ 20.258203] mmcblk0: error -110 sending status command, retrying [ 20.266616] mmcblk0: error -110 sending status command, aborting INIT: cannot execute "/sbin/gett[ 20.277941] mmcblk0: error -110 sending status command, retrying y" [ 20.286792] mmcblk0: error -110 sending status command, retrying [ 20.295469] mmcblk0: error -110 sending status command, aborting [ 20.306516] mmcblk0: error -110 sending status command, retrying [ 20.314932] mmcblk0: error -110 sending status command, retrying [ 20.323390] mmcblk0: error -110 sending status command, aborting INIT: cannot execute "/sbin/getty" INIT: cannot execute "/sbin/getty" INIT: cannot execute "/sbin/getty" INIT: cannot execute[ 20.342819] mmcblk0: error -110 sending status command, retrying "/sbin/getty"INIT: cannot ex[ 20.351617] mmcblk0: error -110 sending status command, retrying ecute "/sbin/getty" INIT: cann[ 20.360485] mmcblk0: error -110 sending status command, aborting ot execute "/sbin/getty" INIT: Id "S1" respawning too fast: di[ 20.371965] mmcblk0: error -110 sending status command, retrying sabled for 5 minutes INIT: can[ 20.381056] mmcblk0: error -110 sending status command, retrying not execute "/sbin/getty" INIT[ 20.389883] mmcblk0: error -110 sending status command, aborting : Id "4" respawning too fast: disabled for 5 minutes INIT: Id "6" respawning too fast: disabled for 5 minutes INIT: Id "3" respawning too fast: disabled for 5 minutes INIT: Id "5" respawning too fast: disabled for 5 minutes INIT: cannot execute "/sbin/getty"cannot execute "/sbin/getty"
INIT: Id "1" respawning too fast: disabled for 5 minutes INIT: Id "2" respawning too fast: disabled for 5 minutes INIT: no more processes left in this runlevel [ 49.005888] random: nonblocking pool is initialized
[PYBOOT] [wandboard 02:56]: Timed out waiting for "<type 'str'>":
[PYBOOT] [wandboard 02:57]: got exception: timeout ~$off
[PYBOOT] [wandboard 02:58]: Done.