Failed boards:
dalmore tegra_defconfig : FAILED 1:26.61 dalmore multi_v7_defconfig : FAILED 1:04.93 dalmore multi_lpae_defconfig : FAILED 1:05.37 panda multi_v7_defconfig : FAILED 1:35.26
Successful boards:
apc vt8500_v6_v7_defconfig : passed 1:11.88 arndale exynos_defconfig : passed 1:03.27 bbb omap2plus_defconfig : passed 1:30.95 bbb multi_v7_defconfig : passed 1:28.65 beaver tegra_defconfig : passed 0:53.94 beaver multi_v7_defconfig : passed 0:57.71 capri bcm_defconfig : passed 0:43.89 capri multi_v7_defconfig : passed 0:44.97 cubie sunxi_defconfig : passed 1:08.05 cubie multi_v7_defconfig : passed 1:09.68 cubie2 sunxi_defconfig : passed 0:58.11 cubie2 multi_v7_defconfig : passed 1:00.32 cubie2 multi_lpae_defconfig : passed 1:01.43 cubox dove_defconfig : passed 0:57.96 hummingboard imx_v6_v7_defconfig : passed 1:20.68 hummingboard multi_v7_defconfig : passed 1:07.32 omap5uevm multi_v7_defconfig : warnings 1:37.02 omap5uevm multi_lpae_defconfig : warnings 1:41.21 panda omap2plus_defconfig : passed 1:15.00 sama5 sama5_defconfig : passed 1:50.31 seaboard tegra_defconfig : passed 1:03.44 seaboard multi_v7_defconfig : passed 1:10.89 snow exynos_defconfig : passed 1:24.00 snowball u8500_defconfig : passed 1:26.29 snowball multi_v7_defconfig : passed 2:08.75 trimslice tegra_defconfig : passed 1:01.92 trimslice multi_v7_defconfig : passed 1:26.57 wandboard imx_v6_v7_defconfig : passed 0:56.15 wandboard multi_v7_defconfig : passed 1:01.84
Offline boards:
omap5uevm omap2plus_defconfig : OFFLINE 1:12.89
Board legend is available at http://arm-soc.lixom.net/boards.html
Last entries of failed logs below:
========================================================================
Board dalmore-multi_lpae_defconfig failure log: -------------------------------------------------
Tegra114 (Dalmore) # tftp 0x82000000 mainline/v3.14-8441-g34917f9/multi_lpae_defconfig/zImage tftp 0x82000000 mainline/v3.14-8441-g34917f9/multi_lpae_defconfig/zImage Using asx0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.138 Filename 'mainline/v3.14-8441-g34917f9/multi_lpae_defconfig/zImage'. Load address: 0x82000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################# 2.8 MiB/s done Bytes transferred = 4524152 (450878 hex) Tegra114 (Dalmore) # setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 Tegra114 (Dalmore) # tftp 0x83000000 mainline/v3.14-8441-g34917f9/multi_lpae_defconfig/dtbs/tegra114-dalmore.dtb tftp 0x83000000 mainline/v3.14-8441-g34917f9/multi_lpae_defconfig/dtbs/tegra114-dalmore.dtb Using asx0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.138 Filename 'mainline/v3.14-8441-g34917f9/multi_lpae_defconfig/dtbs/tegra114-dalmore.dtb'. Load address: 0x83000000 Loading: *### 2.5 MiB/s done Bytes transferred = 34059 (850b hex) Tegra114 (Dalmore) # printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 root=/dev/mmcblk0p1 rootwait debug earlyprintk Tegra114 (Dalmore) # bootz 0x82000000 - 0x83000000 bootz 0x82000000 - 0x83000000 Kernel image @ 0x82000000 [ 0x000000 - 0x450878 ] ## Flattened Device Tree blob at 83000000 Booting using the fdt blob at 0x83000000 Loading Device Tree to 8fff4000, end 8ffff50a ... OK
Starting kernel ...
~$off # PYBOOT: Exception: timeout
========================================================================
Board dalmore-multi_v7_defconfig failure log: -------------------------------------------------
Tegra114 (Dalmore) # tftp 0x82000000 mainline/v3.14-8441-g34917f9/multi_v7_defconfig/zImage tftp 0x82000000 mainline/v3.14-8441-g34917f9/multi_v7_defconfig/zImage Using asx0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.138 Filename 'mainline/v3.14-8441-g34917f9/multi_v7_defconfig/zImage'. Load address: 0x82000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ############################################### 2.8 MiB/s done Bytes transferred = 4502168 (44b298 hex) Tegra114 (Dalmore) # setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 Tegra114 (Dalmore) # tftp 0x83000000 mainline/v3.14-8441-g34917f9/multi_v7_defconfig/dtbs/tegra114-dalmore.dtb tftp 0x83000000 mainline/v3.14-8441-g34917f9/multi_v7_defconfig/dtbs/tegra114-dalmore.dtb Using asx0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.138 Filename 'mainline/v3.14-8441-g34917f9/multi_v7_defconfig/dtbs/tegra114-dalmore.dtb'. Load address: 0x83000000 Loading: *### 2.7 MiB/s done Bytes transferred = 34059 (850b hex) Tegra114 (Dalmore) # printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 root=/dev/mmcblk0p1 rootwait debug earlyprintk Tegra114 (Dalmore) # bootz 0x82000000 - 0x83000000 bootz 0x82000000 - 0x83000000 Kernel image @ 0x82000000 [ 0x000000 - 0x44b298 ] ## Flattened Device Tree blob at 83000000 Booting using the fdt blob at 0x83000000 Loading Device Tree to 8fff4000, end 8ffff50a ... OK
Starting kernel ...
~$off # PYBOOT: Exception: timeout
========================================================================
Board dalmore-tegra_defconfig failure log: -------------------------------------------------
[ 1.079124] avdd-usb: 3300 mV [ 1.081125] avdd-usb: supplied by vdd-sys-5v0 [ 1.087309] rail-3v3: no parameters [ 1.091221] rail-5v0: no parameters [ 1.094795] REGEN3: no parameters [ 1.097728] SYSEN1: no parameters [ 1.101270] SYSEN2: no parameters [ 1.106376] Linux video capture interface: v2.00 [ 1.112846] platform 70019010.iommu: Driver tegra-smmu requests probe deferral [ 1.119738] Advanced Linux Sound Architecture Driver Initialized. [ 1.129776] Bluetooth: Core ver 2.19 [ 1.131829] NET: Registered protocol family 31 [ 1.136123] Bluetooth: HCI device and connection manager initialized [ 1.142534] Bluetooth: HCI socket layer initialized [ 1.147510] Bluetooth: L2CAP socket layer initialized [ 1.152745] Bluetooth: SCO socket layer initialized [ 1.160195] cfg80211: Calling CRDA to update world regulatory domain [ 1.166924] Switched to clocksource arch_sys_counter [ 1.255429] NET: Registered protocol family 2 [ 1.261859] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 1.267532] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 1.274242] TCP: Hash tables configured (established 8192 bind 8192) [ 1.281712] TCP: reno registered [ 1.283335] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 1.289488] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 1.297072] NET: Registered protocol family 1 [ 1.302739] RPC: Registered named UNIX socket transport module. [ 1.306860] RPC: Registered udp transport module. [ 1.311691] RPC: Registered tcp transport module. [ 1.316393] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.322958] PCI: CLS 0 bytes, default 64 [ 1.343028] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 1.351631] bounce pool size: 64 pages [ 1.359418] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.366408] msgmni has been set to 1468 [ 1.374439] io scheduler noop registered (default) [ 1.407387] tegra114-pinctrl 70000868.pinmux: Config param 000e not supported on group drive_gma [ 1.414382] tegra114-pinctrl 70000868.pinmux: pin_config_group_set op failed for group 199 [ 1.422754] tegra114-pinctrl 70000868.pinmux: Error applying setting, ~$off # PYBOOT: Exception: timeout
========================================================================
Board panda-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.646697] Power Management for TI OMAP4. [ 1.651000] OMAP4 PM: u-boot >= v2012.07 is required for full PM support [ 1.658081] Registering SWP/SWPB emulation handler [ 1.664459] vwl1271: 1800 mV [ 1.669372] Skipping twl internal clock init and using bootloader value (unknown osc rate) [ 1.678558] twl 0-0048: PIH (irq 39) nested IRQs [ 1.684204] twl_rtc rtc.11: Power up reset detected. [ 1.691101] twl_rtc rtc.11: Enabling TWL-RTC [ 1.698089] twl_rtc rtc.11: rtc core: registered rtc.11 as rtc0 [ 1.705078] VAUX1_6030: 1000 <--> 3000 mV at 2800 mV [ 1.711212] VAUX2_6030: 1200 <--> 2800 mV at 1800 mV [ 1.717285] VAUX3_6030: 1000 <--> 3000 mV at 1200 mV [ 1.723388] VMMC: 1200 <--> 3000 mV at 3000 mV [ 1.728912] VPP: 1800 <--> 2500 mV at 1900 mV [ 1.734313] VUSIM: 1200 <--> 2900 mV at 1800 mV [ 1.739349] VDAC: 1800 mV [ 1.739807] VANA: 2100 mV [ 1.746582] VCXIO: 1800 mV [ 1.746582] VUSB: 3300 mV [ 1.753479] V1V8: 1800 mV [ 1.757049] V2V1: 2100 mV [ 1.879180] usb 1-1: new high-speed USB device number 2 using ehci-omap [ 1.979400] omap_i2c 48070000.i2c: bus 0 rev0.11 at 400 kHz [ 1.986999] omap_i2c 48072000.i2c: bus 1 rev0.11 at 400 kHz [ 1.995880] omap_i2c 48060000.i2c: bus 2 rev0.11 at 100 kHz [ 2.003295] omap_i2c 48350000.i2c: bus 3 rev0.11 at 400 kHz [ 2.009613] 4809c000.mmc supply vmmc_aux not found, using dummy regulator [ 2.018341] omap_hsmmc 4809c000.mmc: pins are not configured from the driver [ 2.039794] hub 1-1:1.0: USB hub found [ 2.044067] hub 1-1:1.0: 5 ports detected [ 2.059509] 480d5000.mmc supply vmmc_aux not found, using dummy regulator [ 2.098083] mmc0: host does not support reading read-only switch. assuming write-enable. [ 2.108459] mmc0: new high speed SDHC card at address b368 [ 2.114562] mmcblk0: mmc0:b368 00000 7.51 GiB [ 2.120849] mmcblk0: p1 p2 [ 2.589080] usb 1-1.1: new high-speed USB device number 3 using ehci-omap [ 2.793884] smsc95xx v1.0.4 [ 3.092712] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-4a064c00.ehci-1.1, smsc95xx USB 2.0 Ethernet, ae:90:fc:d5:5f:4f ~$off # PYBOOT: Exception: timeout