Hi Kevin,
On Thu, Jun 12, 2014 at 6:11 AM, Kevin Hilman khilman@linaro.org wrote:
Hi Sachin,
On Wed, Jun 11, 2014 at 11:30 AM, Kevin Hilman khilman@linaro.org wrote:
On Wed, Jun 11, 2014 at 9:11 AM, Kevin Hilman khilman@linaro.org wrote:
On Tue, Jun 10, 2014 at 11:19 PM, Sachin Kamat spk.linux@gmail.com wrote:
Hi Kevin,
On Wed, Jun 11, 2014 at 10:59 AM, Kevin's boot bot khilman@linaro.org wrote:
Tree/Branch: mainline Git describe: v3.15-8556-gdfb9454 Failed boot tests (console logs at the end) =========================================== armada-xp-openblocks-ax3-4: FAIL: arm-mvebu_v7_defconfig+CONFIG_CPU_BIG_ENDIAN=y qcom-apq8074-dragonboard: FAIL: arm-qcom_defconfig exynos5420-arndale-octa: FAIL: arm-exynos_defconfig
I do not see any failure with this board with the kernel described above with exynos_defconfig. What exactly is the error that you see or have you enabled anything extra in the config?
There is nothing extra enabled in the defconfig.
This failure has been puzzling me a bit because I've seen it a few times in my mainline tests over the last couple weeks, but cannot reproduce it when I try manually.
I'll keep a closer watch on this and get you the detailed boot log when it fails again.
Here's a failure log.
OK, so I think I figured out why this was failing.
The power cable between the USB controlled relay I use to power the board, and the board itself had the ground wire just floating. I must've bumped it lose when adding another board. That explains the somewhat random failures, and I haven't seen any failures since fixing the cable.
Thanks for the confirmation.
I'll keep an eye on it though.
Sure.